Lockout Tag Out

7/30/2019 Lockout Tag Out

1/22

1

Lockout/Tagout/Verify

Awareness

HOW YOU PLAY A PART

OSHA 1910.147


2/22

2

Lockout/Tagout/Verify

Procedures

The purpose of lockout/tagout/verify is to

prevent energy from accidentally being

released while a machine or equipment isbeing serviced.

The ultimate goal of lockout/tagout/verify

is to protect the safety and health ofemployees.

Secondary is the protection of equipment

from damage.


3/22

3

Definitions of Terms You Will

Likely Hear :

Energy

Source:--Any Source of Electrical,mechanical, hydraulic, pneumatic,

chemical, thermal, gas, water,

steam, air or gravity.


4/22

4

Isolating Device

A mechanical Device That Physically

Prevents The Transmission or Release of

Energy.

--disconnect switches, slide

gates, valves, blocks, and blind

flanges.

Examples are:

E-Stops are not included in isolation devices.


5/22

5

Equipment Specific Procedures

Specific procedures for :

shutting down the equipment.

isolating from its energy source.

blocking from residual energy source.

securing equipment for work.


6/22

6

Lockout/ Tagout

The placement of a lock and tag on an

isolating device which ensures that the

equipment being controlled cannot be re-

energized until the locking device is

removed.


7/22

7

You Will See Different

Colored Locks.

Blue locks will be equipment locks

Used to protect equipment.

Red locks Used for SGS Personal Protection.

Green locks

Given to contractors to use on SGS equipment.

Orange Locks

Group locks for person controlling a group lockout.


8/22

8

You Will See Two Different Color

Tags In Use

Red Tags With Red Locks For Personal

Protection Of SGS Employees.

Red Tags With Green Locks For ContractorProtection.

Yellow Tags With Blue Locks For The Protection

Of Equipment .Tags Function is Communication.

Why They Shut The MachineDown.

Tells Who Shut The Machine Down.


9/22

9

What A Typical Lockout/Tagout Looks Like

With an Equipment Lock.


10/22

10


With a Personal Protection Lock.


11/22

11


With a Contractor & Personal Protection Lock.


12/22

12

Occasionally You May See a Yellow Tag

Without a Lock On a Piece of Equipment That

is Out of Service.

This machine is Tagged Outbecause it Will Not Run.

The Tag Will Tell You WhatIs Wrong With The

Equipment .

Never Attempt To OperateEquipment That Has

Been Tagged .


13/22

13

Verify

The process of operating the start

controls, engaging levers, measuring

voltage, inspecting lockout devicesvalves,disconnect switches, blades, piping

systems in an area to make sure that all

energy sources have been isolated andcontrolled.


14/22

14

You Have a Role

You are either anAffected Employee

AnAuthorized

Employee

Or Both !


15/22

15

Authorized Employee

Authorized Employee-an individualwho uses the lockout/tagout /verify

procedure on a machine or piece of

equipment that is to be serviced ormaintained.


16/22

16

Affected Employee

Affected Employee-an individual whose job

requires him/her to operate or use a machine or

piece of equipment on which servicing or

maintenance is being performed under the

lockout/tagout/verify procedure. This also

pertains to any employee whose job requireshim/her to work in an area where servicing or

maintenance is being performed.


17/22

17

You May Be Both

An authorized employee and an affectedemployee may be the same person, when

the affected employees duties also include

performing maintenance or service on amachine or equipment that requires

Lockout/Tagout/Verify procedure.


18/22

18

Key To Successful

Lockout/Tagout/ Verify is:

Everybody working

together.


19/22

19

Authorized Employees that:

Properly plan the job.

Notify all affected employees in the

area of work.

Shut down the equipment at the

operating controls.

Isolate all energy sources to

equipment.

Lock and tag all isolating devices

Dissipate all stored or residual

energy sources.

Verify the isolation.


20/22

20

Affected Employees that:

Stay clear of the area as much as possible.

Never attempt to assist .Never interfere or tamper with a lock or tag.

Report all unusual situation to your

supervisor or foreman.


21/22

21

As an Affected Employee:

Instrumental in helping protect the safety

of yourself and your co-workers.

May save someone or yourself from grave

injury or even death.


22/22

22

Questions ?

Documents

Lockout Tag Out