Lock-out/ Tag-outLock-out/ Tag-out

OSHA 1910.147OSHA 1910.147

Lock out/Tag out 2

Terminal ObjectiveTerminal Objective

The firefighter will describe the The firefighter will describe the proper procedure for locking out proper procedure for locking out the power source of a piece of the power source of a piece of machinery, as per OSHA machinery, as per OSHA 1910.147, with 100% accuracy.1910.147, with 100% accuracy.

Lock out/Tag out 3

ReasonsReasons

RescueRescueFireFireMalfunctionMalfunction

Lock out/Tag out 4

Minimal RequirementsMinimal Requirements

Identify equipment.Identify equipment.Notify all affected employees. Notify all affected employees. Firefighter should refer to Firefighter should refer to

companies procedure.companies procedure. If machine is operating, it should If machine is operating, it should

be shut down.be shut down.Deactivate energy isolating device.Deactivate energy isolating device.

Lock out/Tag out 5

Minimal Requirements Minimal Requirements (cont.)(cont.)Lock out device.Lock out device.Check for stored energy.Check for stored energy.To verify disconnectionTo verify disconnection

– operate machinery, making sure it operate machinery, making sure it does not operate.does not operate.

Equipment is now locked out.Equipment is now locked out.

Lock out/Tag out 6

Lock out KitLock out Kit

Lock out/Tag out 7

Lock out/Tag out 8

Lock out/Tag out 9

Lock out/Tag out 10

Main Main switch switch locked locked in on in on

positiopositionn

Lock out/Tag out 11

To RestoreTo Restore

Clear areaClear area Equipment in Equipment in

NeutralNeutral Remove LockRemove Lock

Re-energize Re-energize machinemachine

Notify affected Notify affected employeesemployees