Upload
trankhuong
View
232
Download
0
Embed Size (px)
Citation preview
KTK High Pressure downhole connector Canyon delivers serious improvements to an old workhorse.
We all know the Kintec/KTK bulkhead connector used everywhere in MWD/LWD equipment. It is a solid work-horse, but has it’s weak points: fragile body and contacts that loosen up with use. Canyon has addressed both of those shortcomings with premium materials. The original Kintec was made with mineralized epoxy and compression molded. Basically sand and epoxy pressed together and cured. Canyon’s approach uses high temperature PEEK thermoplastic which is injection molded, producing a strong grain structure that resists cracking and breaking. Beryllium Copper makes the socket for the original Kintec connector. BeCu will not hold it’s spring tension at high temperature, and becomes loose after a few thermal cycles. (See the chart). Canyon uses a 6-finger Beryllium Nickel spring contact that retains it’s tension up to 300C. This is the right material for hot-holes and long-life. Ask Canyon for a quote today.
canyon-mfg.com
• Injection Molded PEEK HT Body
• 20 KSI @ 200˚C Service
• 6-Finger Beryllium Nickel Contacts (300˚C rating)
• Universally Interchangeable with All Other KTK
• Crack Resistant Body
Canyon Manufacturing Services, Inc. • 523 Rankin Circle North • Houston, Texas 77073 P 281-876-7105 • F 281-872-7116
Contact Material and StressRelaxation at High Temperature
Exposure Time (Hours) @ 225˚C
Beryllium nickel exhibits little or no stress relaxation when subjected to extended exposure to high temperatures — a critical characteristic for applications operating in harsh environments.
.040
.41 .886 .25
.58
.748
1.547
BeCu GOLDPLATED PINS
2-016 FKM 90 DUROMETER
24 AWGSOLDER CUPS
.040
.41 .886
.58
.748
1.547
.25
BeCu GOLDPLATED PINS
2-016 FKM 90 DUROMETER
24 AWGSOLDER CUPS
1.547
.886
.748
.58
.040
.41 .25
BeCu GOLD PLATED PINS
BeCu WASHERS 2-016 FKM 90 DUROMETER
24 AWG SOLDER CUPS
.886 .41
1.547
.25
.58
.748
.040
BeCu GOLD PLATED PINS
BeCu WASHERS 2-016 FKM 90 DUROMETER
24 AWGSOLDER CUPS
Product Details175˚C @ 15 KSI
Medium Pressure/Medium Temperature Series200˚C @ 20 KSI
High Pressure/High Temperature Series
Canyon’s contacts are made from beryllium nickel that has been heat treated to achieve ultimate spring properties. The graph illus-trates how beryllium copper loses it’s spring properties over time at a high temperature (225˚C). Thus, for burn-in applications and continuous operation above 150˚C beryllium, nickel should be substituted for beryllium copper.
KTK 10-PIN BULKHEAD CONNECTOR 925-0276-01
KTK 10-PIN BULKHEAD CONNECTOR, 6S/4P925-0252-01
KTK 10-PIN BULKHEAD CONNECTOR, 6P/4S925-0254-01
100
90
80
70
60
50
40
30
20
10
10 100 10000
KTK 10-PIN BULKHEAD CONNECTOR 925-0278-01
(Beryllium Copper)Contact
(Beryllium Nickel)Contact
% o
f Ini
tial N
orm
al F
orce