Embed Size (px)
Citation preview
Knauf Moisture Resistant Gypsum Boards are gypsum wallboards manufactured speci cally for use in areas
Knauf Moisture Resistant Gypsum Boards
Gypsum Board Datasheet
EN-520
10-2017
exposed to moisture and humidity.
Knauf Moisture Resistant Gypsum Boardsare gypsum wallboards manufactured speci cally
and humidity.
Knauf Moisture Resistant Gypsum Boardsare standard performance gypsum boards used as the cladding component of drywall constructions in humid areas such as:
Partition or Ceilings of Kitchens/BathroomsWall Linings/Furrings in Kitchens/BathroomsPartitions with tiled nish requirementsAny internal area which is exposed to humidity
Lightweight constructionsEasy, fast and dry applicationGood sound insulation performanceHydrophobic boards impregnated againstabsorption of moistureA material that breathes and balances roomclimate and humidity levelsEnvironmental friendlyLimitless design options
Appearance:Green Paper Liner
Edge Detail:
Taper Edge (TE)
Asbestos content: None
Technical Data
seitreporPnoitacilppA fo sdleiFnoitpircseD tcudorP
* Special sizes are a`vailable upon request.
Board Dimensions:Thickness : 12.5 mm / 15 mm Width : 1200 mmLength : 2400 or 3000 mm*
Surface Water Absorption: EN520
Total Water Absorption: EN520
Knauf Moisture Resistant Gypsum Boards EN-BS
The constructional and structural properties, and characteristic building physics Knauf system can solely beensured with the exclusive use Knauf system components, or other product expressly recommended by Knauf.
The information provided in this lea et is only intended to give guidance in selecting and using Knauf products. While we make every effort to ensure its accuracy, neither Knauf LLC and its branchesnor any of tis employees or af liates warrant or assume any legal liability or responsibility for the completeness or usefullness of any failure in installation or constructing any structure installation or building or caused by using this lea et. Readers are adviced to independently verify this information prior to rely on it. In particular, readers must obtain appropriate independent advice on the use of products in speci c structures, insllations or buildings to ensure compliance with all regulations, including health and safety regulations. Knauf reserves the right to amend technical speci cation without notice.
Please contact our sales department for inquiries about storage and packing.
Note:
www. .egKnauf Egypt
Plant: Ataqa Industrial Zone, Suez
Website: www.knauf.eg
E-Mail: [email protected]
Board Weight (12.5mm) : 7.8 kg/m²
for use in areas exposed to moisture
Board Type:EN520 - Type H2
Head Office: 6A Road 23, 3rd Floor, Maadi, Cairo – Egypt
Tel.: +20223 59 55 44
Fax : +20223594477
