Appearance:Ivory / Grey Paper Liner
Board Type:EN520 - Type A
Edge Detail:Square Edge (SE)
Taper Edge (TE)
Asbestos content: None
Knauf Regular Gypsum Boards (RG) are gypsumwallboards which are
essential for standardlightweight drywall constructions.
Knauf Regular Gypsum Boards are the essentialfor standard
lightweight drywall construction andare used as the cladding
component for:
Drywall partitions using metal framesSuspended ceilings using
metal framesFurring and wall liningsPerfabricated building
unitsDrylining blockwork/concrete wallsusing dot and dab of a
gypsum basedbonding compound
Lightweight constructionsEasy, fast and dry applicationGood
sound insulation performanceA material that breathes and
balancesroom climate and humidity levelsEnvironmental
friendlyLimitless design options
Please contact our sales department for inquiries about storage
and packing.
Board Dimensions:
Thickness : 9.5 mm / 12.5 mm / 15 mmWidth : 1200 mmLength : 2400
or 3000 mm*
Product Description
Technical Data
Note:
Fields of Application Properties
* Special sizes are available upon request.
Knauf Regular Gypsum Boards (RG) EN-BS
Knauf Head Office
The constructional and structural properties, and characteristic
building physics Knauf system can solely be ensured with the
exclusive use of Knauf system components, or other product
expressly recommended by Knauf.
www. .ae
Phone: +971 4 337 7170
Fax: +971 4 334 9659
P.O. Box: 112871, Dubai
[email protected] information provided in this leaflet is only
intended to give guidance in selecting and using Knauf products.
While we make every effort to ensure its accuracy, neither Knauf
LLC and its branchesnor any of this employees or affiliates warrant
or assume any legal liability or responsibility for the
completeness or usefullness of any failure in installation or
constructing structure installation or builidingor caused by using
this leaflet. Readers are adviced to independently verify this
information prior to reply on it. In particular, readers must
obtain appropriate independent advice on the use of products in
specific structures, installations or buildings to ensure
compliance with all regulations, in cluding health and safety
regulations. Knauf reserves the right to amend technical
specification without notice.
P.O.Box 50006Ras Al Khaimah, U.A.E.Tel: +971 7 221 5300Fax: +971
7 221 5301
Made in UAE
Knauf Manufacturing Plant
