Upload
hatuyen
View
213
Download
0
Embed Size (px)
Citation preview
WWW.JEVEN.COM
U V - T u r b o h o o d s
Product description, Product code 2
Parts 3
Functioning principle 4
Dimensions 5
Exhaust air, pressure loss and sound data 7
Supply air, pressure loss and sound data 8 Distribution of supply air, lights 9
Positioning Electrical and automation planning 10
We want to help you in design of ventilationby offering Jeven designer service to yourdisposal.Design Service helps in design and makesunique proposal solution with Jevenproducts.
Contact us: [email protected] 010 231 2030
WWW.JEVEN.COMAll rights reserved
PAGE 2 JEVEN Kitchen ventilation
PRODUCT DESCRIPTION
UV-Turbo canopies are equipped with TurboSwing filter unit including ozone-free UV-light.
UV-Turbo hood has been designed especially for the kitchens with heat recovery or changing air flow.
UV-TurboSwing filtering solution was developed for high efficient grease separation and odour removal in professional kitchens. Thanks to excellent filtration efficiency ducts stay clean and filtration efficiency remains high even at low airflows.
UV-Turbo hoods
UV-Turbo hood is equipped with lights IP 54 and TurboSwing filtering unit and ozone-free UV-light.
LIGHTS AND FILTERS
PRODUCT CODE
JSI - R - UV - Turbo - 3000 x 1500 x 540 - 4 x 250 - 3 x315 + 480 l/s - 550 l/s - CB - UV-SC - FP
JSI = Supply air hood JLI = Exhaust air hood
MaterialR = Stainless steelS = Glass
FilterLenghtWidthHeight
Number and size of the supply air connectionsNumber and size of the exhaust air connectionsSupply air flow, l/sExhaust air flow, l/s
ACCESSORIESCB= Covering boardUV-SC= UV-SwingControl FP = Ansul fire extinguishing system
PAGE 3
WWW.JEVEN.COM All rights reserved
JEVEN Kitchen ventilation
UV-Turbo hoods
7
10
8
9
6
1
324
1
3
2
5
6
4
5
2
6
PARTS JSI-R-UV-TURBO
1. Outer casing, stainless steel or laminated glass 2. Light fixture with cable 3. UV-TurboSwing filter unit
4. Exhaust air connection and damper plate 5. Ceiling console
6. Hanging bracket
MATERIAL
1. Outer casing, stainless steel or laminated glass 2. Direction air unit with measurement tap for the supply air 3. UV-TurboSwing filter unit
4. Personal supply air nozzle
5. Supply air connection and damper unit
6. Exhaust air connection and damper plate
7. Light fixture with cable
8. Supply air unit
9. Ceiling console
10. Hanging bracket
PARTS JLI-R-UV-TURBO
The canopy’s base material is stainless steel,AISI 304. The side panels can be made of stainless steel or laminated glass.
PAGE 4 JEVEN Kitchen ventilation
WWW.JEVEN.COMAll rights reserved
1
26
1
4
5
2
3
1
2
4
3FUNCTIONING PRINCIPLE JLI-R-UV-TURBO
UV-Turbo hoodsFUNCTIONING PRINCIPLE JSI-R-UV-TURBO
1. Dirty air rises due to temperature differences against the
ceiling of the hood.
2. Dirty air is exhausted immediately through the TurboSwing units.
3. Since TurboSwing’s air intake is placed close to the ceiling, the
warmest dirty air is always exhausted through it.
Ventilation efficiency is of the highest rate because of the correct
position of TurboSwing with respect to the kitchen equipment.
4. The purified air flows in the catalyst-coated chamber where UV-
light transforms remaining grease to carbon dioxide and water.
Clean air is exhausted into the ducts.
PAGE 5
WWW.JEVEN.COM All rights reserved
JEVEN Kitchen ventilation
UV-Turbo hoods
DIMENSIONS JSI-R-UV-TURBO
Wall hood
Island type hood
500
120
190
width
F
he
igh
t
75
M
AA
2x36W 2x36W
wid
th
A
K
length
C
B
øD
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
Module 2Module 1
A-A
A-A
wid
th
K
length
2x58W2x58W
2x58W 2x58W
E
G
A
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
315
53W+24WM
UV-Turbo
Module 2Module 1
AA
width
M
Fh
eig
ht
75500500120
190
C F øD G E min K min M540 200 500 160 100 400 340 65330 500 290 200 125 550 350 110540 500 500 250 150 550 350 110
Size and place of supply air Height
A and B measurement must be >300mm.
UV-Turbo hoods are designed based on your drawings.The length and width can be freely selected.
Island type hood
Wall hood
UV-Turbo hoods
UV-Turbo hoods are designed based on your drawings.
The length and width can be freely selected.
DIMENSIONS JLI-R-UV-TURBO
Module 2Module 1
AA
2x36W2x36W
wid
th
(module)
length
A
B
50
0
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
widthh
eig
ht
75
500
190
120
500
A-A
Module 2Module 1
2x36W2x36W
2x36W2x36W
wid
th
(module)
length
A
B
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
315
53W+24W
M
UV-Turbo
BB
B - B
width
he
igh
t
75190
120
500
500
PAGE 6 JEVEN Kitchen ventilation
WWW.JEVEN.COMAll rights reserved
Factor, Kok
Hz 125 250 500 1000 2000 4000
Kok 7 -1 -5 -5 -7 -6
tol. ±3 ±3 ±2 ±2 ±3 ±4
Sound power level Lw in each octave band is computed by adding the corresponding factor, Kok to the sound power level LpA. Lw= LpA+Kok.
PRESSURE LOSS AND SOUND DATA
100
120
80
6070
40
50
30
Adjustment plate ½ closed
Pre
ssu
re
P
s(P
a)
dB(A) =40
dB(A) =38
80
6070
40
50
l/s
3m /h
dB(A) =44
dB(A) =40
dB(A) =35
open
80 100 160 240 320 400 120 200
300 500 700 1000 1400
TurboSwing 1100 rpm
100
120
80
6070
40
50
30
Adjustment plate ½ closed
Pre
ssu
re
P
s(P
a)
50
l/s
dB(A) =38
dB(A) =34
dB(A) =30
3m /h
open
80 100 160 240 320 400 120 200
300 500 700 1000 1400
TurboSwing 750 rpm
EXHAUST AIR
20
40
60
80
100
1 2 3 4 5 6 7 8 9 10 11
Particle size, micrometer (µm)
TurboSwing separation rate 90-95%
UV-light’s effect to separation rate, (ozone free UV-light)
Combined separation rate 95-99%, Kitchen equipment and manufacturing process affect separation rate
�
Combined filtiration efficiency of TurboSwing and UV-light
Spigot size ø Exhaust flow Pressure loss3
mm l/s m /h Pa
315 100-200 360 - 720 20 - 60
Recommended exhaust flow / spigot
UV-Turbo hoods
WWW.JEVEN.COM All rights reserved
PAGE 7JEVEN Kitchen ventilation
SUPPLY AIR
Hood height Supply air unit width
mm 200 mm 500 mm
330 - 50-90 l/s
540 40-70 l/s 100-150 l/s
Spigot ø200 mm. Unit width 500 mm. Hood height 330 mm.
Ps
(Pa
)
l/s
605040
302520
16
121087
14
25 30 40 50 60 80 100 120 160
100 200 300 500
0,5 0,8 1,4L0,2 (m)
dB(A) =45
dB(A) =40
dB(A) =35
Damper half closed
dB(A) =30
open
Ps
(Pa
)
l/s
605040
302520
16
121087
14
25 30 40 50 60 80 100 120 160
100 200 300 500
0,5 0,8 1,4L0,2 (m)
dB(A) =45
dB(A) =40
dB(A) =35
dB(A) =30
Damper half closed open
Hz 125 250 500 1000 2000 4000 Kok -2 7 4 -5 -19 -26 tol. ±6 ±4 ±2 ±2 ±3 ±5
Spigot ø160 mm. Unit width 200 mm. Hood height 540 mm.
Ps
(Pa
)
l/s3m /h
605040
302520
16
121087
14
30 40 50 60 80 100 120 160 200
100 200 300 500 700
0,5 0,8 1,4L0,2 (m)
dB(A) =40
dB(A) =35
dB(A) =30
Damper half closed open
dB(A) =45
Spigot ø250 mm. Unit width 500 mm. Hood height 540 mm.
Hz 125 250 500 1000 2000 4000 Kok -2 1 2 1 -7 -16 tol. ±3 ±3 ±2 ±2 ±3 ±4
Hz 125 250 500 1000 2000 4000 Kok 6 8 4 -5 -10 -18 tol. ±3 ±3 ±2 ±2 ±3 ±4
Spigot ø200
Spigot ø160
Spigot ø250
UV-Turbo hoods
PAGE 8 JEVEN Kitchen ventilation
WWW.JEVEN.COMAll rights reserved
The canopies are supplied from the factory with suitable air flow rates for a pressure level of 25-35 Pa.
PRESSURE LOSS, SOUND DATA & THROW LENGTH / SUPPLY AIR UNIT
LIGHTS
DISTRIBUTION OF SUPPLY AIR
1 Unidirectional thrown pattern
2 Displacement thrown pattern
3 Bidirectional throw pattern
Supply air unit, Damper open
HzSound attenuation, dB
Hood height Spigot 125 250 500 1000 2000 4000
330 mm ø 200 17 10 10 11 18 24
540 mmø 160 24 8 5 12 17 24
ø 250 16 9 7 11 16 23
1 2 3
UV-Turbo hoods
Jeven supply air columns deliver a controlled and flexible distribution of the supply air. It is possible to wash the supply air columns in a dishwasher and the inside of the supply air chambers is easy to clean. These columns allow individual adjustment of air patterns and airflows, which means better indoor climate for the kitchen staff.
1 Light fixture as standard, IP 54-67
T8:B=111mm,(1x18W, 1x36W, 1x58W)B=168mm, (2x18W, 2x36W, 2x58W)
Colour temperature 840(Cool White)
2 About 2m cable, type EKK 3x1,5
By default, every hood module comes with a light fixture.The light fixture has a cable which should be connectedto a junction box with a cable lock.The junction box is not included.
12
B60
50
WWW.JEVEN.COM All rights reserved
PAGE 9JEVEN Kitchen ventilation
UV-Turbo hoodsPOSITIONING
The size of the canopy is determined by the size of the kitchen equipment. The overhang depends on the type of equipment and the distance between the hood and the equipment.For this type of equipment, the overhang should be at least 300 mm. With ovens the overhang should be min. 400 mm.The typical distance between the hood side and the floor is 2100-2200 mm.If the equipment has any doors that open upwards, make sure there is enough distance to the canopy.
21
00
-22
00 X >0.2 X >400
ELECTRICAL AND AUTOMATION DESIGN GUIDELINES
HPAC designer defines to the plans the types and locations of the products to be wired.
Electrical designer defines to the plans the location of the safety switch, switchgear and wiring from the panelboard or kitchen switch to the safety switch.
Automation designer defines to the plans the running time of the UV-TurboSwing and it shall match to the running time of kitchen.
Safety switch is compulsory and it should be situated close to the hood and on the visible place in the kitchen.
The safety switch, appliance sockets and the cables marked with the broken line are not included in the Jeven delivery.
230VAC230VAC230VAC2m
230VAC
Connection boxUV-Turbo
Connection boxUV-Turbo 2m
Safety switch
Appliancesockets forpossible branches
TurboSwing motor
LNPe
UV-TurboInternal interface
UV-unit
Wiring diagram
PAGE 10 JEVEN Kitchen ventilation
WWW.JEVEN.COMAll rights reserved