www.c-racer.com

INSTRUCTION

Model Product Code

Royal Enfield Interceptor 650

Royal Enfield Continental GT 650LR-RE

CONTENTS

1 / 1

Luggege Rack

1-2

You are advised to read the instructions carefully, before you proceed to any changes. Any modifications on your motorcycle should be performed by specialized personnel,

however the installation process of this product is quite easy if you follow the instructions below.

The end result should appear as in the photo Thank you for choosing one of our products.

For any further information please do not hesitate to contact us: Tel.: +30 2108075387 Email: The product is for race use only

info@c-racer.com

This product can be installed ONLY if you use our Scrambler Seat SCR-RE-SCRAB

1 X metal Rack4 X metal bracket4 X screws Μ8Χ20 (hexagonal)4 X screws M6x15 (allen-round head-washer)4 Χ safety nuts Μ64 X washer 6x18

Fit the 4 brackets at the pre existing threads on the sub frame with the M8x20 bolts. Place the luggage rack so that it matches with the side brackets. Use all the supplied bolts to hold it and tighten as soon as you adjust the rack in the correct position.