User manual for INSITE installation on Windows 8

Windows 8 has .NET framework 3.5(includes framework 2.0,3.0 and 3.5) feature as an “install on demand” feature which means that if an application needs .NET Framework 3.5, then it needs to enabled. INSITE installer is dependent on .NET framework 2.0 due to which it is mandatory for user to enable the feature “.NET framework 3.5” on Windows 8 before installing INSITE setup.

This user manual depicts how to enable the feature “.NET framework 3.5” on Windows 8. Please note that INSITE installation needs to be done after enabling this feature.

Follow the below mentioned steps to enable the feature “.NET framework 3.5”.

Check whether “.Net framework 3.5” is enabled on your PC.

a) Upon startup of Windows 8 machine, following screen is displayed.

b) Right click on the screen to get the “All App” icon as shown below. Click on the same

icon.

c) “All app” window will be displayed as follows. Select “Control Panel“ icon.

d) “Control Panel” window will be displayed as follows. Select Program icon.

e) After selection of “Programs” following screen will be displayed. Select “Turn Windows features on or off”.

f) If user does not have rights to install programs and features, following dialog will appear asking for Administrator’s credentials. After putting Administrator’s User name and Password and clicking “Yes” installation will get continue.

Note: Only user with Administrator right can enable the feature.

g) After selection of “Turn Windows features on or off” following features screen will be displayed as follows.

Verify if the checkbox “.NET framework 3.5 (includes 2.0 and 3.0)” is already selected. If it is already selected then it means that the feature is already installed and enabled. Do not follow following steps and can start with standard INSITE installation. If the checkbox is not selected then follow the instructions mentioned in step 2 to enable the feature “.NET framework 3.5”.

How to enable the feature “.Net framework 3.5” on your PC.

The framework can be enabled by two methods which are as follows.

A. Download the setup of .NET framework 3.5 via web and install it.

If the user enables the feature then the setup of the framework will be downloaded to users PC and installed automatically. Following steps need to be followed to enable the feature via web.

i. Enable the checkbox “.Net framework 3.5 (includes 2.0 and 3.0)” and click on “OK” button.

ii. After the feature is enabled the process will verify if the required components are present on users PC and following dialog will be displayed

iii. Following dialog will appear for confirmation if user wants to download the

framework from internet .If user clicks on the options “Download files from Windows update” then setup will be downloaded and installed.

iv. The following progress dialog will be displayed with download and installation status.

v. The setup will be downloaded and installed successfully. Following dialog will be displayed

B. Enable the feature “.NET framework 3.5 “using Windows 8 DVD. i. Insert Windows 8 OS installation DVD in CD\DVD player. ii. Open “All App” and select Command Prompt.

iii. Right click on Command Prompt icon. A new icon panel will be displayed in the bottom of the window. Select “Run as Administrator.

iv. Put Administrator’s User name and Password in following window. Clicking on “Yes” will continue with Installation.

Note: Only user with Administrator right can enable the feature.

Following Command screen will appear.

v. Execute following command. DVD location is Windows 8 DVD drive location.

dism /online /enable-feature /featurename:NetFX3 /All /Source:[DVDLOCATION:]\sources\SxS /LimitAccess