HYDRAULIC

INTENSIFIER

HI100. Is designed to be used when the power plant (e.g. miner, drill rig ) has it’s own directional valve with a pressure reducing control and a flow adjustment control and just pressure intensification is required.

Hydraulic Intensifier.

• Quick connect into any hydraulic machinery and will operate any 3,000 to 10,000psi equipment.

• Available in single or double acting configuration. • The unit can be installed to electro and air hydraulic bolting machines, continu-

ous miners, road headers even rapid face bolters. It will operate quicker and safer.

• Without the need for as much servicing as an air operated unit. • It now comes with an adjustable pressure and flow valves so it can be fitted to

your machine with out any costly modifications. • Load sensor port standard equipment.

HI200. Has an onboard pressure reducing and flow adjustment controls. Directional valve is still on the machine suppling hydraulic pressure

HI300. A complete unit with a directional,

pressure control and flow control valve.

Hydraulic Intensifier:

• Quick connect into any hydraulic machinery and will operate any 3,000 to

10,000psi equipment. • Available in single or double acting configuration. • The unit can be installed to electro and air hydraulic bolting machines, con-

tinuous miners and road headers. It will operate quicker and safer. • Without the need for as much servicing as an air operated unit. • It now comes with an adjustable pressure and flow valves so it can be fitted

to your machine with out any costly modifications. • Load sensor port standard equipment.