Click here to load reader
Upload
phungkhanh
View
212
Download
0
Embed Size (px)
Citation preview
HVAC Controls Security and Access Control Fire and Life Safety Systems
CCTV & Digital Video Asset Tracking Energy Applications
Ente
rprise
Buildings Integrator
Netw
orking functions easily integrate with existing systems and devices.
Distributed System Architecture (DSA)Provides centralized monitoring for geographically distributed systems, and scalability for large enterprise systems.
PRODUCT FEATURES:• Integrate multiple servers each performing a different application: HVAC, Security, Life Safety, Industrial Control• DSA for points and DSA for cardholders allows Operator Client Stations consistent access to both local and remote points and cardholder data• Extends the capacity of a single server solution to support additional points, channels, and controllers• Utilizes Windows 2000 Server
APPLICATIONS:• The HVAC system and security system operate independently, and share data to optimize occupancy scheduling, lighting, and energy management
strategies based on information from both systems• Cardholder data may be managed from a single client on a single server in a “Traveling Card” concept allowing cardholders to move between sites
EBI DSA Server EBI DSA Server
Intranet and Internet AccessConnectivity options allow access from anywhere in the world via HMIWeb Client and Browser Stations, or web page access via Web Toolkit and Web Point Control optional interfaces.
PRODUCT FEATURES:• HMIWeb browser station utilizing Microsoft Internet Explorer (IE) provides full client access with
operator permissions and area segregation enforced• EBI systems with TCP/IP network access and the network server option may also utilize Web Toolkit
pages with Active X controls for analog and status point monitoring and control• Web Point Control utilizes Java Applets to allow status point control and allow users to define sched-
ules up to one week in advance
APPLICATIONS:• Users away from the office may access their EBI system using VPN, or through a thin client access
over the internet to check system status, issue commands, respond to alarms, or request reports
HMIWeb Client Browser Station
Internet Explorer Web Toolkit
EBI Web Point Control
Modbus
Open System Integration – EBI supports multiple industry standard communication protocols to allow enterprise-wide monitoring and control from a single client workstation.
PRODUCT FEATURES:• Client and server support for BACnet, LonWorks, OPC, Modbus, and Advanced DDE• BACnet and OPC discovery mechanisms to simplify engineering and configuration
APPLICATIONS:• Monitoring and control of third-party HVAC central plant and unitary equipment, industrial controls, and other systems utilizing Open System Communication Protocols• Monitoring third-party Life Safety systems • Integrated system sequences of operation• History collection, trending, and global scheduling of third-party open systems
BACnet, ASHRAE STD, SSPC 135-2001 • Client/Server Interface, Cimetrics BACstac • BACnet Ethernet & IP Support• RPM, WRP, COV, BBMD support
(See EBI PICs for more information)LonWorks® Network• ANSI/EIA Std. 709.1• LonWorks Network Services (LNS)• Connectivity via: PCLTA, i.LON® 600/1000• EXCEL 5000 Open LON and Excel CARE
(see 63-9026 for more information)
Advanced Dynamic Data Exchange (AdvDDE) and DDE• Point monitoring and control
Modbus: Gould, Modbus Plus, Universal Modbus• Gould Modbus to Modicon 584 and 984 PLCs• RS232 serial interface and Modbus TCP support
OLE for Process Control (OPC)• Read/write of analog and status points• Item names up to 64 characters EBI HMIWeb Client Stations
• Static and rotary station licensing• HMIWeb client and IE browser support• 40 simultaneous clients supported
– Operator area segregation and permissions enforced• Multi-Monitor support on single client license• Operator definable alarm and event summaries• Windows 2000 or Windows XP
Wide Area Network/Internet (WAN)
Local Area Network (LAN)
Redundant LAN (optional)
Network Router/Firewall-14507744 Series74-3487 Specification Data• Ethernet and T1 interfaces• AES network encryption capable
Redundant Router(Optional)
Enterprise Systems IntegrationShare information with personnel, office and financial system databases.
PRODUCT FEATURES:• PeopleSoft and SAP Integration to EBI Cardholder Management System (CMS) database for database synchronization periodically or on demand• Generic Cardholder Object Model (CHOM) database integration interface option• Open Database Connectivity (ODBC) support allows read-only access to EBI point, history, and event data for third-party system analysis and reporting
APPLICATIONS:• Changes made to personnel information in the HR database are automatically sent to the EBI CMS to update area and equipment access information• Events in the EBI CMS sends information to the HR system for time and attendance or after-hours billing reporting for energy and services
Global HRMS & PeopleTools support Interface to SAP R/3 Human Resources Module ODBC
Redundant Ethernet Network (optional)
Primary Ethernet Network
W7054A UL Listed EBI ServerSpecification Data 74-3201• Single or dual Intel Xeon processors at up to 3.2 Ghz clock speed• 12 GB SDRAM (max)• 584GB Internal HD storage (max)• 10/100/1000 Gigabit on-board Ethernet• Embedded SCSI and RAID controllers• CD/CDR/DVD and tape backup options
EBI Server and Redundancy Option• Microsoft Windows 2000, SQL (or MSDE) platform• Remote access server (RAS) supported (see EBI Compatibility Matrix for more information)Server PC Specifications (Standard Performance):• Dell, Pentium 4, 1.7 GHz, 1 GB RAM, 40 GB HD min.• Terminal services support for remote access via PDA or other handheld device• Alarm pager capability for off-site notification including e-mail and SNMP support• Diagnostics tools with remote access capabilities• Quality assurance: ISO 9001, SEI Level 3
Go to: www.honeywell.com/ebi for additional information regarding our powerful software applications.
PRODUCT FEATURES:• The complete solution for the safety and comfort of your people and the effective operation of your buildings• Provides an “enterprise view” that goes beyond traditional building automation, fire, and security systems• Fully UL listed to provide authorized operators with 2-way command/control of any subsystem from any listed station• Allows full interaction between applications to minimize risk to personnel and assets, maximize personnel productivity, and optimize system and equipment efficiency• Operator segregation allowing access only to data and information appropriate for the specific user• Fully scalable from a single application and controller, to enterprise integration with multiple applications and servers distributed across the Ethernet LAN and WAN• Migration platform for a wide range of Honeywell legacy products including Excel Building Supervisor (XBS), Excel Building Supervisor Integrated (XBSi), DeltaNet
Excel Plus, MicroCel, MacroCel, Excel Classic, FS90/FS90 Plus, Delta 1000 and Delta 2000
APPLICATIONS:• Enterprise-wide, Integrated sequences of operation allow events in one subsystem to automatically and directly trigger events in another system. Example:
– Tenant activates Fire Alarm pull station– EBI initiates digital video recording and captures the pre-recorded video leading up to the event– Doors are unlocked allowing safe egress while presenting live video to maintain facility security– HVAC initiates proper fan pressurization control for smoke control system operation– Instruction pages and system information is presented to the various operators to manage risk and follow proper emergency procedures
• Emergency and routine situations handled with maximum efficiency by bringing the right information together at the correct decision point
Honeywell Enterprise Buildings Integrator™ An integrated facility management solution.
Honeyewll EBI is approved for use in the following categories:• UL 864 – UOJZ Proprietary Protective Signaling System
– UOXX Control Unit Accessories– UUKL Smoke Control Systems– UDTZ Signal System Units
• UL 916 – PAZX Energy Management Equipment• UL 1610 – AMCX Central Station Receiving Unit• UL 294 – ALVY Access Control System Units• UL 1076 – APOU Proprietary Alarm Receiving Units• UL 2017 – QVAX Process Management Equipment• UL 60951 – NWGQ Information Technology Equipment
• Applicable for use in UL2050, DoD, DCID, and SCIF high-security applications• Approved by ULC for similar applications in Canada• Approved by the California State Fire Marshal, NYC/MEA, and additional international agencies• See individual product specification data sheets for specific approvals
NetworkFirewall
Corporate Intranet, VPN, or WAN
NetworkFirewall
NetworkFirewall
Excel 50 Controller74-3029 Specification DataI/O Point Capacity
Analog Inputs: 8 ............................. 0 to 10 Vdc........................................................ 0 to 20 mA........................................................ (w 499 Ω resistor)........................................................ NTC 20k ohmAnalog Outputs: 4 ........................... 0 to 10 VdcDigital Inputs: 4 .............................. 3 of 4 fast totalizerDigital Outputs: 6............................ Triac 800 mA
(all 6 Triacs max 2.4A)
Same Power of the Excel 500• Similar operator interface• Same software• Same bus configuration• Fully programmable using Excel CARE
Model Type• Excel 50 UPC – without operator interface; Excel 50 UMMIPC-with
operator interface
I/O Point Capacity• 22 physical points• Up to 256 pseudo points• 46 network variables supported on the LonWorks® Network
Application module: ........................ Flash–EPROMEngineering tool:............................. Excel CARE
Constant Volume AHU Controller W775074-2956 Specification Data• Proven PID space temperature control algorithm• Integral or packaged economizer control• Separate intelligent recovery rates for heating and cooling• Demand limit control temperature setpoint in energy saving direction• LonMark profile 8030
W7750A Constant Volume AHU ControllerInputs• 1 T7770 wall module• 1 resistive input• 2 dry contact digital inputs• 1 bypass button inputOutputs• 6 relay outputs• 1 LED output
W7750B/C Constant Volume AHU ControllerInputs• 1 T7770 wall module• 4 resistive inputs• 2 voltage inputs• 4 dry contact digital inputs• 1 bypass button inputOutputs• 8 triac outputs (W7750B)• 1 LED output• 5 triac and 3 analog outputs (W7750C)
VAV Box Controller W775174-2942 Specification Data74-2953 Specification Data• Pressure-independent or pressure-dependent VAV box control• Single-duct/dual-duct VAV box control solutions• Reheat and peripheral radiation control (selectable "first on" sequencing)• Series/parallel fan• Supply/return air tracking• LonMark functional profile 8010
W7751HInputs• 1T7770 wall module• 1 resistive input• 1 voltage input• 1 bypass button inputOutputs• 4 triac outputs• 1 LED output• Integrated actuator
W7751B, D, F• 1 Expanded input/output capacity actuator not includedInputs• 1 T7770 wall module• 2 resistive inputs• 1 voltage input• 3 dry contact inputs• 1 bypass button inputOutputs• 8 triac outputs• 1 LED output
Unit Ventilator Controller W7753A74-2962 Specification Data• Space or return air temperature control• ASHRAE cycles 1, 2, 3• 8 output for HVAC control• PWM or floating damper control• LonMark functional profile 8080
W7753AInputs• 1 T7770 wall module• 2 resistive inputs• 2 voltage/current inputs• 4 dry contact digital inputs• 1 bypass button inputOutputs• 8 triac outputs• 1 LED output
Fan Coil Unit Controller W775274-2959 Specification Data• 2 pipe, 4 pipe fan coil unit control• Up to 3 speed fan control• With or without electrical reheat• Space freeze protection• LonMark functional profile 8020
W7752Inputs• 1 T7770 wall module• 1 dry contact digital input• 1 bypass button inputOutputs• 3 relay outputs• 1 LED output• 1 electric heat relay (F type only)
Remote Input/Output Device W7761A74-2698 Specification Data• Generic I/O for lighting, exhaust fans, pumps, and more LonMark stan-
dard objects for sensors and actuators
W7761AInputs• 4 resistive inputs• 2 voltage inputs• 4 dry contact digital inputsOutputs• 8 triac outputs
Communicating Thermostat T7300F/Q7300H63-1281 Specification Data• One thermostat model for either heat pump or conventional RTU • Up to three stages of heat and cool• Works with T7047 Remote Temperature Sensor • Proportional plus integral control eliminates temperature fluctuations • 7 day programming - 2 occupied / 2 unoccupied periods per day • Discharge air sensing capability with C7046C Sensor• Conforms to LonMark thermostat functional profile
Hydronic Controller W7762B/7763C74-2934 Specification Data• Radiators, induction units and fan coil units with manual fan switching • High efficiency, low cost heat/cool valve application solution • Model with integrated or remote module for wall or unit mounted• LonMark functional profile 8020
W7762/3Inputs• 1 space temperature sensor (either built in or via T7770 wall module)• 1 dry contact digital inputOutputs• 1 relay output• 4 triac outputs
i.LON® 600 Router• Provides network connectivity between Ethernet
LAN and LONTalk (FTT-10A) bus
NOTE: For UUKL applications, use the i.LON® 1000
If C-Bus:
Building network adapter (BNA) Q7055A74-3445 Specification Data• TCP/IP capable, offers a wide range of
network connectivity options and online system diagnostic support
If LON:See i.LON® 600
Excel 500 Controller74-2036 Specification DataI/O Point ModulesAnalog InputXF521A Insert Card
Module Type: .................................. Analog inputNo. of Inputs:.................................. 8Type of Inputs: ................................ 0 to 10 volts........................................................ 0 to 20 mA or 4 to 20 mA........................................................ NTC
XF526 Insert CardModule Type: .................................. Analog inputNo. of Inputs:.................................. 8Type of Inputs: ................................ 0 to 10 volts........................................................ 0 to 20 mA or 4 to 20 mA........................................................ NTC........................................................ PT100, 1000, 3000, Balco
Analog OutputXF522 Insert Card
Module Type: .................................. Analog outputNo. of Outputs: ............................... 8Type of Outputs: ............................. 0 to 10 volts +/- mA eachManual OverrideSwitches: ........................................ 5No. of LEDs:.................................... 8
XF527 Insert CardModule Type: .................................. Analog outputNo. of Outputs: ............................... 8Type of Outputs .............................. 0 to 10 volts +/- mA eachManual OverrideSwitches: ........................................ 0No. of LEDs:.................................... 8
Digital InputXF523 Insert Card
Module Type: .................................. Digital inputNo. of Inputs:.................................. 12No. of LEDs:.................................... 12Inputs 1 and 2: ............................... Digital input or fast totalizerInputs 3-12: .................................... Digital input or slow totalizer
Digital OutputXF524 Insert Card
Module Type: .................................. Digital outputNo. of Outputs: ............................... 6Type of Outputs: ............................. 5 change over contacts........................................................ 1normally open contactManual OverrideSwitches: ........................................ 5No. of LEDs:.................................... 6
XF529 Insert CardModule Type: .................................. Digital outputNo. of Outputs: ............................... 6Type of Outputs: ............................. 5 change over contacts........................................................ 1 normally open contactManual OverrideSwitches: ........................................ 0No. of LEDs:.................................... 6
Three Position OutputXF525 Insert Card
Module Type: .................................. Three position outputNo. of Outputs: ............................... 3Type of Outputs: ............................. Floating controlManual OverrideSwitches: ........................................ 3No. of LEDs:.................................... 3 pairs of 2
Power ModuleXF502 Power Module
Module Type: .................................. Power supplyInput: .............................................. 24Vac + 10%/-15%Output:............................................ Class 2, 24VacSwitches: ........................................ 1No. of LEDs:.................................... 3
Smart Excel 500 Controller74-3666 Specification Data
Distributed Input/Output Modules 74-2145 Specification Data Analog Input XFL521B Module
Distributed Module Type: ................ Analog inputNo. of Inputs: ................................. 8Type of Inputs................................. 0 to 10 volts........................................................ 0 to 20 mA or 4 to 20 mA........................................................ 20k NTC........................................................ PT1000Accessories:.................................... 3 4 5
Analog OutputXFL522B Module
Distributed Module Type: ................ Analog outputNo. of Outputs: ............................... 8Type of Outputs: ............................. 0 to 10 voltsNo. of LEDs:.................................... 8Accessories:.................................... 1 3 4 5
Digital InputXFL523B Module
Distributed Module Type: ................ Digital inputNo. of Inputs:.................................. 12No. of LEDs:.................................... 12Accessories:.................................... 3 4 5
Digital OutputXFL524B Module
Distributed Module Type: ................ Digital outputNo. of Outputs: ............................... 6No. of LEDs:.................................... 6Type of Outputs: ............................. 6 Isolated changeover contactsAccessories:.................................... 2 3 4 6
Distributed Input/Output Accessories1 XFR522
Module Type: .................................. Manual override for XFL522Manual OverrideSwitches: ........................................ 8
2 XFR524 Module Type: .................................. Manual override for XFL524Manual OverrideSwitches: ........................................ 6
3 XSL511 Module Type: .................................. Connector module for XFL521,
XFL522, XFL523, XFL5244 XSL512
Module Type: .................................. Manual disconnect module between terminals and I/O modules
5 XSL513 Module Type: .................................. Terminal block for XFL521/522/523
6 XSL513 Module Type: .................................. Terminal block for XFL524
Smart I/O Module74-3671 Specification DataXFC3A06001
Terminals: ....................................... Fixed permanentDigital Inputs: ................................. 4Digital Outputs: ............................... 4Analog Inputs:................................. 4 (20K NTC)Analog Outputs: .............................. 2 (VDC)
XFC3D06001Terminals: ....................................... RemovableManual Override:............................. 6No. of LEDs:.................................... 10Digital Inputs: ................................. 4Digital Outputs: ............................... 4Analog Inputs:................................. 4 (20K NTC)Analog Outputs: .............................. 2 (VDC)
C-Bu
s or
LON
LON
LON
PRODUCT FEATURES• A family of distributed control products that are open and easy to use, the EXCEL
5000 OPEN System is a proven performer that defines versatility• Every control device in the EXCEL 5000 OPEN System family uses LonWorks®-
based open communications protocol – the worldwide standard in building control – so you can expect smooth, efficient interoperability between devices
• Third-party LonMark device support allows additional devices from multiple manu-facturers to be added to the existing LON bus
• Stand-alone operation at the field control bus level for maximum performance and reliability
• Free topology transceiver technology simplifies wiring, uses standard network tools• True Integration with fire, security, and digital video systems creates application
opportunities never before available
EXCEL 5000® OPEN™ System Architecture: Designed for unmatched DDC control versatility and true open system flexibility.
Network Device Server – 14006700 Series74-3487 Specification Data• Ethernet to RS232 or RS485 Converter, DB25 connecting via DB25 serial• 128 – 256 bit AES NIST certified encryption
NexSentry Star II Controller (board only)P/N 92410250030 Base 2-door ControllerP/N 92410000300 Star Controller Modular EnclosureP/N 92410450020 4-door Chipset P/N 92410850020 8-door ChipsetP/N 92411650030 16-door Chipset• Base two-door system can be field upgraded to a 16-door unit• On-board integrated 16 inputs and 4 outputs• Can monitor 255 inputs and control 96 outputs• Modular upgrade options for easy customization and expansion• Switch selectable baud rate and address for ease of installation• Elevator control up to 96 floors• 100,000 cardholder capacity• S-NET dual twisted-pair wire installation for readers and inputs• 2 on-board Wiegand ports expandable to 16• Ethernet, RS-232, RS-485, and dial-up host communications• Built-in automatic battery charging system
OmniProx™ OP1092995100063-B Specification DataP/N OP10HON• Lowest profile HID compatible card reader• Typical read range: 2 - 3"• Wiegand output • Genuine HID™ compatible
OmniSmart OS1092995100082-A Specification DataP/N OS10HON• Contactless smart card reader
OmniProx™ OP3092995100063-B Specification DataP/N OP30HON• Mullion size• Typical read range: 4"• Wiegand output • Genuine HID™ compatible
OmniSmart OS3092995100082-A Specification DataP/N OS30HON• Contactless smart card reader
OmniProx™ OP4092995100063-B Specification DataP/N OP40HON• Mounts on single-gang electrical box• Typical read range: 4"• Wiegand output • Genuine HID™ compatible
OmniSmart OS409299510082-A Specification DataP/N OS40HON• Contactless smart card reader
OmniProx™ OP4592995100063-B Specification DataP/N OP45HON• Switch-plate size; mounts on a UK size electrical box• Typical read range: 3 – 4.5"• Wiegand output • Genuine HID™ compatible
OmniProx™ OP9092995100063-B Specification DataP/N OP90-FWS• Switch-plate size; mounts on a US size electrical box• Vandal-resistant cast zinc-alloy design• Typical read range: 2"• Wiegand output • Genuine HID™ compatible
OmniProx™ OP95P/N OP95-FWS• Switch-plate size; mounts on a US size electrical box• Vandal-resistant cast zinc-alloy design with piezo keypad• Typical read range: 2"• Wiegand output • Genuine HID™ compatible
SNET
RS-4
85 Wie
gand
TCP/IP Network AdapterP/N 92410000020• Controller mounted Ethernet LAN module• 128 – 256 bit AES-certified encryption
SNET
RS-4
85
Lon
HandKey IIP/N HK-2• Hand geometry reader• Up to 32512 users with
memory upgrade• Direct enrollment integra-
tion to EBI• Outdoor version available
Mifare BioAccess™ Finger Print Reader92995100070-B Specification DataP/N 92030600200• High accuracy• Highly secure• Compatible with Magstripe and Wiegand 26-56 bit systems
DR420192995100012-D Specification DataP/N 92042011000• Low profile DigiReader
(HID compatible)• SNET and Wiegand connections
DR420592995100043 Specification DataP/N 92042050100• DigiReader with tamper
DR420892995100012-D Specification DataP/N 92042081000• HID compatible• SNET and Wiegand connections
DR4205K92995100012-D Specification DataP/N 92042050000• DigiReader with integrated keypad
– 24 V
DR4205K92995100012-D Specification DataP/N 92042052100• DigiReader with integrated keypad,
12 V with tamper
DR420392995100012-D Specification DataP/N 92042030000• Mullion-mount DigiReader
DR422092995100012-D Specification DataP/N 92042200000• Long-range proximity reader
WIRO 4/8/4 (board only)92995100050-D Specification Data92995100049-D Specification DataP/N 92410034840• Additional 8 inputs / 4 outputs and
4 Wiegand ports
WIRO 4/8/4 Modular Double Board EnclosureP/N 92410000400
MIRO 16/8 Board in Modular EnclosureP/N 92410020200• Additional 16 inputs / 8 outputs and 2 SNET ports
MIRO 32/0 Board in Modular EnclosureP/N 92410021200• Additional 32 inputs and 2 SNET ports
MIRO 2/24 Board in Modular EnclosureP/N 92410023200• Additional 2 inputs / 24 outputs and 2 SNET ports
*Tema Server – Proximity TerminalP/N TS_TA32, TS_TA33• CPU68EN302 bi-processor including a 68000 (32 bit archi-
tecture) and onboard Ethernet controller• Bi-directional reader with manual swiping for proximity cards • Multi-language management of the user interface• Up to 15.500 cardholder capacity with full time and
Attendance functionality• Up to 65.000 transactions stored on a removable cartridge
with Flash EPROM• Lead battery backup, with full functionality for 4 hours in
case of network failure• Tamper protection of the unit to prevent opening
*Tema Server – Magnetic TerminalP/N TS_TA31• CPU68EN302 bi-processor including a 68000 (32 bit archi-
tecture) and onboard Ethernet controller• Bi-directional reader with manual swiping for magnetic
stripe cards • Multi-language management of the user interface• Up to 15.500 cardholder capacity with full time and
attendance functionality • Up to 65.000 transactions stored on a removable cartridge
with Flash EPROM • Lead battery backup, with full functionality for 4 hours in
case of network failure• Tamper protection of the unit to prevent opening
*Tema Key – Proximity & HID ReaderP/N TK_C02, TK_C03 HID Compatible• NEURON CHIP™ 3150 (Echelon) 32 KByte EPROM
to download application firmware• LonWorks™(Echelon) connection to the TS_AC01
unit with a transfer rate of 78 kbps • Alphanumeric graphic liquid crystal display (LCD),
back-lit, with two lines of 16 characters• Reader for proximity cards, HID with TK_C03, (stan-
dard ISO/ABA 125Khz, up to 5cm reading distance)• Numeric-function keyboard with 16 keys• 1 double-colored LED signal: green LED for the cor-
rect reading and red/yellow for invalid • Variable tones for valid/invalid transactions• Management of two dry contact digital inputs to
control the door status• Management of two relay outputs (1A@30V) to
command door unlock and signal external outputs• Tamper protection of the unit to prevent opening
*Tema Key – Magnetic ReaderP/N TK_C01• NEURON CHIP™ 3150 (Echelon) 32 KByte EPROM
to download application firmware• LonWorks™(Echelon) connection to the TS_AC01
unit with a transfer rate of 78 kbps • Alphanumeric graphic liquid crystal display (LCD),
back-lit, with two lines of 16 characters • Bi-directional reader with manual swiping for mag-
netic cards (track 2, ISO/ABA 7811 standard).• Numeric-function Keyboard with 16 keys• 1 double-colored LED signal: green LED for the cor-
rect reading and red/yellow for invalid • Variable Tones for valid/invalid transactions• Management of two dry contact digital inputs to
control the door status• Management of two relay outputs (1A@30V) to
command door unlock and signal external outputs• Tamper protection of the unit to prevent opening
*Tema Key – Digital I/O ModuleP/N TK_C21• NEURON CHIP™ 3120 (Echelon)• 4 balanced inputs with a range between 0 and 12 V• 4 open collector outputs with a range between 0 and
12 V up to 100mA• LonWorks™ (Echelon) connection with a transfer
rate of 78 kbps • Tamper protection of the unit to prevent opening
*Tema Server – Control UnitP/N TS_AC01• CPU68EN302 bi-processor including a 68000 (32
bit architecture) and onboard Ethernet controller• Dialer support with LAN or as a backup to LAN• Industry standard LON architecture• Fault tolerant controllers and power supplies• Management of up to 8 doors with TemaKeys on
both directions• Management of up to 64 I/O• 1 MB FLASH EPROM to download application
firmware via FTP• Up to 60.000 cardholder capacity• Up to 40.000 transactions buffer• Peer-to-peer communication for fast front-end
independent decision making• Onboard clock/calendar chip with automatic man-
agement of DST• Onboard battery backup, with full functionality for
4 hours• Full Time and Attendance functionality
*Tema Key – Dual Wiegand InterfaceP/N TK_S014• NEURON CHIP™ 3120 (Echelon)• LonWorks™ (Echelon) connection with a transfer
rate of 78 kbps • 2 balanced inputs with a range between 0 and 12 V• 2 powered open collectors output, holding current
1.2A, peak max 5A inductive load • Tamper protection of the unit to prevent opening
*Tema Power – Power Supply UnitP/N TP_U01 (0.8A), TP_U03 (4.5A)• LonWorks™ (Echelon) connection to the
TemaServer control units, with a communication speed of 78 kbps
• Protection from power overloads• LED signal: green LED for “correct functioning,”
flashing red for “errors in the communication signal,” red for “device out of order” and yellow for “Echelon connection is active”
• Lead battery backup, with full functionality for 4 hours in case of network failure
• Tamper protection of the unit to prevent opening
Control Center 2 (CC2) KeypadsP/N 8003-277Order # HL-8003277• Maximum 4 units per system• Status display and local control• 2 line x 24 character LCD display
Area Keypad (KID) P/N 8003-220Order # HL-8003220• Maximum 8 units per system• Arm/disarm specific areas• 6 LED annunciator display
6-Input Concentrator (BIC-6)P/N 8003-238Order # HL-8003238• Supervised and tamper protected• 6 supervised inputs/outputs• 7 segmented LED point alarm/trouble display window
Multiple Output Module (MOM)P/N 8003-286Order # HL-8003286• Supervised and tamper protected• 8 opto-coupled outputs• 7 segmented LED point/alarm display window
2-Input Concentrator BIC-2P/N 8003-242; Order # HL-8003242 (White actuator buttons)
2-Input Concentrator BIC-2 HUP/N 8003-284; Order # HL-8003284 (Red actuator buttons for emergency/panic)• 2 supervised inputs• 1 output• Supervised and tamper protected• Remote reset• Distress actuator button
Hall Effect Door Switch IV (HEDS IV)P/N 8003-283Order # HL-8003283• High-security door contact detector• Supervised and tamper proof
i9000 Remote Intelligent Power Supply (RIPS)P/N 8003-217Order # HL-8003217• Maximum 7 units per controller• Powered by 16V AC transformer• Two 400mA, 12V DC switched auxiliary outputs• 1A programmable output• Status report to control unit over RS485 comm
RS-2
32
COMM 1RS-485
COMM 2RS-485
i9000 Control UnitSpecification Data 74-3035P/N 8003-332Order # HL-8003332• Monitors multiple areas (8 areas maximum)• 62 device modular architecture capacity• 512 input points with precise identification• 64 output points to various equipment and accessories• 99 user IDs• 4 authority levels limiting access to selected functions• Area access – limits access to selected areas• Language preference personalized to each user• 2 RS-485 communication lines• Power supply included
Wie
gand
Ethe
rnet
Intelliguard 9000™ Security and Intrusion Detection
PRODUCT FEATURES:The Intelliguard 9000™ (I9000) is a protection system designed to detect intrusions and other critical conditions when used with the Enterprise Building Integrator™ (EBI)• The I9000 monitors multiple areas, receiving input and providing localized report-
ing and control. A single I9000 control unit can simultaneously monitor many different buildings, areas with high-security door sensors
• Other compatible detectors and output devices can be added to the system, such as motion sensors, sound detectors, lights, sirens, and buzzers
• Multiple regulatory agency listings• Meets high-security UL Grade AA requirements• Multi drop EBI configurations (3 i9000's) using RRI and RS-485 bus wiring or
Cobox/Ethernet
TemaLine A Comprehensive Solution for Security
PRODUCT FEATURES:TemaLine is redefining the concept of integrated security solution subsystems for today and tomorrow.• Designed for unparalleled system reliability and availability using the “Shared
Load” concept• New distributed architecture and modularity reducing the management load
on the supervisory system• Multi-application/multi-functional controller provides access control, time and
attendance and intruder protection• Optional redundant TemaServer and “Shared Load TemaPower”• Single standalone application to a fully integrated EBI solution
NexSentry Star II Controller Innovative Access Control System
PRODUCT FEATURES:NexSentry® Star II controller changes access control standards by offering easy installation, modular components at an affordable price for the most demanding access control applications.• Modular architecture allows for easy upgrades to future technologies• Advanced digital technology with embedded Intel® 32 bit microprocessor
provides the fastest response in the industry• Support for multiple access technologies including Digital Proximity,
Magnetic Strip, Smart Card, Key Pad, and Biometrics
Photo ID StationLogitech® QuickCam Pro 4000Logitech P/N 961239-0403
3Com® Watchport V USB Camera3Com P/N 00371800
PhotoID MiniTower• Intel Pentium 4 processor, 1000BaseT • Integrated Ethernet adapter, online HD storage
configurable to meet customer requirements
FlashPoint 3Dx Lite Video Capture CardIntegral Technologies® P/N 3280• Allows use of any analog camera• Available in PCI or AGP
FlashBus MV Lite Video Capture CardIntegral Technologies® P/N 3047• Allows use of any analog camera• Only available in PCI
Fargo® DTC500 Series• Up to133 cards per hour
Fargo® Pro-LX• Up to120 cards per hour
Evolis Dualys Series• Up to 140 cards per hour
Evolis Pebble Series• Up to 140 cards per hour
USB
USB
Parallel
Parallel Ethe
rnet
Ethe
rnet
*Please contact your Honeywell sales representative for information on the Tema product line.
Ethe
rnet
Excel Life Safety System (XLS) – LAN Interface32004871-005 (single), 32004871-002 (dual)74-3444 Specification Data• One XLS LAN Interface serves entire XLS200/1000 subsystem:
- XLS system point display and command from any EBI workstation- Up to 40,000 points available from 64 XLS nodes- XLS points served via XLS high-speed peer network
Meets requirements of UL864 UOJZ for fire alarm control unit and UL1076 for security applications.• 24 Vdc power supplied directly from XLS1000• Redundant version with Ethernet Link Protector for Class A/Style 6 LAN connections
Excel Life Safety System (XLS) – Fire Network Adapter (FNA)– Q7055A103174-3966 Specification Data• TCP/IP network capable• Offers wide range of network connectivity options• Online system diagnostic support• Using the XLS-NCM interface, up to 100 XLS-NCA/XLS140 nodes can be connected to
the EBI through a single FNA Interface• UL864 (UOJZ) listed for full control of the XLS140 subsystem
PRODUCT FEATURES:As a stand-alone small-to-medium system, or as a network of distributed panels, Honeywell’s XLS140 intelligent fire alarm control panel meets virtually every application requirement. Designed with modularity and for ease of system planning, the XLS140 can be configured with just a few devices for small building applications, or for integrated campus and commercial installations.
High-speed/patented smoke detection technology:• FlashScan® Intelligent features• Poll 318 devices on each loop in less than one second• Activate up to 159 outputs in less than three seconds• Fully digital, high-precision protocol (U.S. Patent 5,539,389)• Advanced Warning Addressable Combustion Sensing (AWACS™) — nine levels• Multi-detector algorithm involves nearby detectors in alarm decision
(U.S. Patent 5,627,515)• Automatic detector sensitivity testing
Excel Life Safety System – XLS14085-3001 Specification Data• One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6, or 7• Up to 159 detectors (any mix) and 159 modules per SLC• Standard 80-character display, 640-character large display, or display-less
(a node on a network)• Network option – 103 nodes supported (XLS140, XLS-NCA Network Annunciator) using
wire or fiber-optic connections• Selectable system sensor strobe synchronization
Excel Life Safety System – XLS-NCA85-3008 Specification Data• 640 character – enhanced LCD display• Printer, CRT, and keyboard interfaces• User interface for all points in all nodes on the system• Can be used as a separate annunciator or combined in the XLS140 cabinet• Supports additional 32 remote ACS annunciator modules
Excel Life Safety System – XLS-CAB-4 Series85-3002 Specification Data• 16 gauge steel with locking doors• Right- and left-hand hinge• Trim rings for semi-flush mounting• Cabinets available in 4 sizes (C size shown) to accommodate job site requirements
Excel Life Safety System – LDM Series Graphic Annunciators85-3001 Specification Data• Modular and expandable, graphic annunciators display the information required by each
job site• LDM input/output modules communicate via RS485
Communication Interface ModulesPart Number FunctionRPT-485 Repeats EIA-485 over twisted pair or converts to fiber-optic
mediumXP5 The XP5-M and XP5-C provide FlashScan® transponder pointsXP The XP series transponder provides conventional monitor and
control points in CLIP (standard polling of each intelligent device) mode only
XPIQ The XPIQ quad intelligent voice transponder for distributed multichannel voice evacuation systems, an integrated audio amplification and distribution subsystem controlled by FACP. Capable of playing up to four simultaneous messages. Accepts up to four 25-watt amplifiers.
Annunciator/Control ModulesPart Number FunctionACS Annunciator control modules ACM-16AT, AEM-16AT, ACM-32A,
and AEM-32AAFM Annunciator fixed modules AFM-16A, AFM-16AT, and AFM-32ALDM Lamp driver modules LDM-32, LDM-E32, and LDM-R32SCS Smoke control station; eight (expandable to 16) circuits
Power SuppliesPart Number FunctionACPS-2406 6.0 amp addressable charger power supplyFCPS-24 The FCPS-24 is a remote six-amp (four-amp continuous)
repeater/power supplyFCPS-24S6/-24S8 Remote six-amp and eight-amp power supplies with battery
charger
NotificationPart Number FunctionICM-4RK NAC module, provides four style Y (Class B) or Style Z (Class
A) circuitsCRM-4RK Control relay module, four form-C relay contacts per circuitVCM-4RK Voice control module, provides four Style Y and Style Z speaker
circuits, eight manual select switches and indicatorsDCM-4RK Dual channel module provides four class B or class A speaker
circuitsXLS-VCC-1B Voice control center; provides a variety of user-selectable tones
on a single channelXLS-TCC-1B Telephone Control Center; provides a stand-alone two-way Fire
Fighters telephone (FFT-7S)FFT-7 FFT-7S Fire fighters telephone control with master handsetAA-30 Audio amplifier, 30 wattsAA-120 Audio amplifier provides up to 120 watts of audio power (25
VRMS) for the XLS140AA-100 Use the AA-100 for 70.7 VRMS systems and 100 watts of power
XLS140 Primary System ComponentsPart Number FunctionXLS140-CPU Central processing unit with integral 3.0 amp power supplyKDM-2 80-character backlit LCD display with keypadXLS-NCA Network control annunciator, 640 characters
Twis
ted
Pair
Leas
ed T
elep
hone
Lin
eFi
ber O
ptic
Cab
le
RS48
5 Au
dio
& D
ata
Twis
ted
Copp
er P
air
Shor
t Hau
l Mod
ems
24 g
a Te
leph
one
Line
sAu
dio
& D
ata
Fibe
r Opt
ic C
able
Flexible Network Communication
Topology
XLS-
NET
Twis
ted
Copp
er P
air
XLS-
NET
Fibe
r Opt
ic C
able
XLS-
NET
Tele
phon
e Li
nes
DeltaNet FS90Capability, Reliability, Expandability
PRODUCT FEATURES:The DeltaNet FS90 Fire and Security (F&S) family of real-time, microprocessor-based controllers offers conventional and intelligent fire detection and annunciation, security, and access control.
Building on the base FS90 system architecture, the family includes:• DeltaNet FS90 System for conventional zone alarm verification, cross-zoning, annun-
ciation, control, individual zone alarm, supervisory and trouble indication, zone discon-nect switches, and a local audible signal. Security functions include local and remote secure/access switching and high-security line supervision
• DeltaNet FS90 Plus System (“FS90 Plus”) for intelligent functions to monitor and con-trol individually addressable fire and security devices. FS90 Plus can have up to nine Intelligent Loop Interface Boards, each of which can have two 2-wire circuits or one fault-tolerant 4-wire circuit
• DeltaNet Access Control for monitoring and control of up to eight card readers and/or keypads per controller. The system supports multiple card technologies, multilevel antipassback, two-card access, supervisor-required access, and elevator control
DeltaNet FS90 Fire and Security Controller74-3154 Specification Data• Conventional and intelligent detection and signaling• Stand-alone operation and/or integration with higher order systems• Function boards for configuration to site requirements• Easily changeable data file in nonvolatile memory• Auto-tuning sensitivity• Communication to panels via dual twisted pair, leased telephone lines, or fiber
optic cables
DeltaNet FS90 Fire Command Center74-3154 Specification DataAny DeltaNet F&S system, whether stand-alone or connected to a higher-order system, can include an optional command center for alarm and trouble message display and optional printout, and for data display and entry from a keypad
XLS1000 F&S Bus Interface - 1450753274-2771 Specification DataFully compatible with the DeltaNet F&S bus architecture, this interface allows XLS1000 controllers to co-exist with the FS90 on the F&S bus, providing a seemless migration path for customers
DeltaNet FS90 Access Management Controller (AMC)74-2438 Specification DataFS90 functions or operate as a dedicated access system• Fully integrated with EBI• Support for major access card technologies, including magstripe, barrium ferrite,
proximity, Wiegand, and biometric readers• Complex access control applications such as elevators control, multi-level anti-pass-
back, two-card, supervisor rules, PIN support, and over 200 schedules per controller
DeltaNet FS90 Fire Management System74-3154 Specification DataSingle and dual channel audio with optional fire warden telephoneFCS function boards provide:• Audio and phone control (for fire signal and evacuation message output, all-call paging
of multiple speakers)• Speaker and phone selection (for individual selection of speaker and phone circuits,
all-talk two-way communication with multiple phones, optional phone page to address audio speakers from a fire fighter telephone)
• Heating, ventilating, and air conditioning (HVAC) override (for two and three-position control of fans, dampers, and other non-audio equipment)
AccesoriesPart Number Function3-BATS Battery shelf for XLS-RCC enclosures; space for one 65 AH or two 50
AH batteries3-BTSEN Battery sensor/distribution module3-TAMP Tamper switch for 3-CAB7, 3-CAB14 and 3-CAB21 cabinets3-TAMP5 Tamper switch for 3-CAB5; mounts to side of cabinet3-TAMPRCC Tamper switch for XLS-RCC series cabinets; mounts to side of cabinet32004129 XLS1000 high-security interface for UL 1076 Grade AA security for up
to eight zones32003193 XLS1000 panel mount printer
Modules, Amplifiers, Power Supplies and BoardsPart Number Function3-LDSM LED display support module3-24R (Y/G) 24 red LED display module (yel/grn)3-12SR (Y/G) 12 switches/12 red led display/control modules (yel/grn)3-12RY 12 red LED and 12 yellow LED display modules3-12/S2Y 12 switches, each with 2 yellow LED display/control modules3-12/S1GY 12 switches with one grn and one yel LED per switch3-12/S1RY 12 switches with one red and one yellow LED per switch3-6/3S1G2Y 6 groups of 3 switches; each switch has (1) grn, (2) yel LEDs3-6/3S1GYR Control/display module with six groups of three switches; each switch has
one grn, yel, red LED3-ZA20A/B 20W zoned amplifier; selectable for 70 or 25 Vrms operation3-ZA40A/B 40W zoned amplifier; selectable for 70 or 25 Vrms operation3-ZA90 90W zoned amplifier; selectable for 70 or 25 Vrms operation3-PPS/M Primary power supply with local rail module 120v, 50/60 hz3-IDC8/4 Initiating device circuit module3-OPS Off premises signaling module3-ASUFT Audio source unit with local microphone and firefighter’s telephone3-CPU1 Main panel processor3-LCD Main display interface with LCD3-RS485A/B/R Network communication board3-RS232 RS232 communication board3-FIB/A Fiber optic communications interface3-MODCOM(P) Modem communicator DACT with duplex V.32 bis 14.4K baud modem3-NSHM1/2 Network short haul modem communications interface with modem
connections3-SAC Security control moduleXLS-KPDISP Keypad/display module
XLS1000 Primary System ComponentsPart Number Function3-DSDC Dual SIGA data controller with one SIGA data board; mounts to local rail
3-AADC Analog addressable data loop controller; mounts to local rail
Excel Life Safety Sensors
SMOK
E
Model Type Features CompatibilityFS90 XLS1000 XLS140
TC806 Photoelectric • Low-profile design, low current draw• Tamper-resistant wiring base• Integral insect resistant screen to reduce nuisance alarms• Dual LEDs provide 360-degree viewing• Optional remote LED annunciator• Built-in test mechanism
Yes Yes Yes
TC807 Ionization
XLS-IS Ionization • Environmental compensation• Pre-alarm sensitivity capability• Continuous self-diagnosis and storage of environmental and operational data• Day/night sensitivity adjustment• One red and one green status LED• Standard, relay, and fault Isolator mounting bases• Design and manufacture per ISO 9001 standards
Yes
XLS-PS Photoelectric Yes
HEAT
TC808 Thermal135° ROR/FT190° FT
• Thermistor sensing circuit for fast response• Rate-of-rise detection model available• Dual sensor LEDs provide 360-degree viewing• Modern low-profile design• Compatible with Honeywell CLIP and FlashScan loop transmission
Yes Yes Yes
XLS-HFS Fixed Temperature135° FT
• 135°F (57°C) fixed temperature detector type• Combination 15°F (9°C) per minute minimum rate-of-rise and/or 135°F (57°C) fixed temperature detector type• Electronic addressing and device mapping• Continuous self-diagnosis and storage of environmental and operational data• Standard, relay, and fault isolator mounting bases
Yes
XLS-HRS Rate of Rise Yes
SPEC
IAL
APPL
ICAT
IONS
TC840Acclimate
Multi-CriteriaPhotoelectricThermal
• Automatically optimizes performance for each installed location• Continuous monitoring of detector sensitivity• Digital pulse-width encoded communication with noise immunity• Compatible with Honeywell CLIP and FlashScan™ intelligent
Yes Yes Yes
TC844Filtrex™
Harsh EnvironmentPhotoelectric
• High-density Filtrex™ filter eliminates the need for sensor cleanings• Filtrex™ filter self-monitors clogs and reports a trouble condition at the panel when replacement is needed• Two sensor LEDs provide status indication at the control panel• Provides rotary-decade switches to set sensor address
Yes Yes Yes
TC846Pinnacle™
Ultra-High Sensitivity Laser Smoke Detector0.02% - 2.00%/ftObscuration
• Fast response to detect very early particles of combustion• Ultra-high sensitivity capability• On-board drift compensation• Transient rejection algorithms• Environmental tracking• Wide sensitivity range
Yes Yes Yes
XLS-IPHS MultiCriteriaIon, Photo, Heat
• Environmental compensation• Wide 0.67 percent to 3.70 percent/ft. sensitivity range• Pre-alarm sensitivity capability• High ambient temperature operation (up to 100°F [38°C])
Yes
FS90 Control and Communication Function BoardsPart Number Board Function14505104-005 CA FS90 control/CPU board14506344-001 LJ RS485 communications and display board14506690-001 LJ Leased line communications and display board14506302-003 CC Audio control board14506302-004 CE Fire telephone control board14506302-002 SB/SD Two position manual switch – 4 circuits14506302-001 SH/SK Three position manual switch – 4 circuits
Fire/Security Function Boards Part Number Board Function14506106-001 AA Class “B” initiating device circuit – 4 zones14505108-001 AB Class “A” initiating device circuit – 2 zones14505106-002 AC Class “B” initiating device circuit – 4 zones – contact input only14505118-001 AD Digital input – 8 circuits, unsupervised14505132-002 AE Intelligent detection loop (slc) - 2 circuits per board14505188-001 AF Class “B” secure/access circuit – 4 zones, with local control14505188-002 AG Class “B” secure/access circuit – 4 zones, no local control14506432-001 AH Class “B” ul grade aa high-security circuits14505110-001 BF Class “B” notification appliance circuit – 2 NAC circuits, 2 N.O. Relays14505110-002 BG Class “A” notification appliance circuit – 2 NAC circuits14505116-001 DB Digital output – 8 circuits14505112-001 DC Accessory relay board - 4 SPST N.O. OR N.C. relays
*LONMARK is a trademark of Echelon Corporation
Ethe
rnet
Ethe
rnet
Ethe
rnet
FS90 LAN Interface Assy- 14006700-59810074-3487 Specification Data74-3646 Specification Data• Configurable for single or dual Ethernet networks• Converts Ethernet to RS232/RS485 with optical isolation for UL Fire/Security applications• Supports 128-bit AES encryption
PRODUCT FEATURES:Honeywell LifeSafety Manager™ provides unprecedented protection of your building’s assets and occupants. This life-safety application incorporates: • Intelligent, microprocessor-based devices, including multi-sensor detectors that provide
early warning of smoke and fire conditions, and virtual elimination of nuisance alarms• Advanced distributed, digital audio communication system facilitating safe, orderly
evacuation of occupants • Rapid and reliable fire alarm controller peer-to-peer communications network • Integral firefighters telephone communication system • Emergency paging to support storm warning and hazardous materials (HazMat) notifica-
tion • Control of the facilities’ HVAC equipment, such as fans and dampers, to contain smoke
and create safe havens • Releasing of fire doors to permit safe exit • Sprinkler supervisory status of suppression systems, sprinkler valves, and fire pumps
Excel Life Safety System – XLS100074-2073 Specification Data• Modular system designed for medium to large building and campus applications• 168-character LCD automatically displays system messages and alarms• 64 node, 160,000 points with 3-second alarm response over any size network• Total network wring over 300,000 ft (91,440m)• 250 devices per loop, 2500 devices per node• 750 ms signature loop alarm response• Every point can be viewed and controlled from any node• Digital storage and transmission of eight multiplexed channels of audio for
unmatched intelligibility• Local, proprietary and central station operations with integral alarm printer option• Modem communicator option with DACT functionality• Graphic, text/LED, and keypad/display annunciator options• Listed for suppression releasing and smoke control applications
Excel Life Safety System – Envoy Annunciator74-3481 Specification Data• High-contrast lines and text• LCD displays custom text messages in graphic annunciator enclosure
- Firefighters smoke control station options- Agency listed with Honeywell control panels- Surface or semi-flush mounting with optional trim- Field-installed modification of graphic with optional graphic transfer kit
Excel Life Safety System – Remote Annunciator74-2888 Specification Data• Backlit LCD display provides 168 characters
- Displays information important to user- Hands-free, first and last event with highest priority
• LCD display uses queues to sort events• Variety of cabinet configurations size the annunciator to the application• Programmable LED flash rates• Slide-in custom labels
Excel Life Safety System – Flexible Network CommunicationsSupports communication on:• Twisted pair copper• Single and multimode fiber optic cable• Existing dry telephone lines
Excel Life Safety System – XLS1000A High-Performance Life-Safety Solution
Excel Life Safety System – XLS140Advanced Detection and Networking Digital Video Manager (DVM) - A Flexible, Highly Integrated
CCTV Solution with Advanced Capabilities.
PRODUCT FEATURES:• Software-based digital CCTV video management platform • Uses off-the-shelf PC, storage, and networking hardware • Live viewing and playback while recording• Camera pan/tilt/zoom control from any client on the network• Continuous, scheduled, alarm, pre-alarm motion, and user-activated recording modes• Up to 30fps performance on all channels• Communicates using TCP/IP network protocol using industry-standard Ethernet technologies• Full integration with EBI including direct access to alarm recordings from EBI alarm/event
summary display• High-speed SQL-based search engine (date, time, camera, operator, point, alarm)• Digitally signed recordings and audit trail• Redundant server for complete fault tolerance (optional)
DVM Database ServerManages the DVM system. Contains recording index, audit log, and web server(1) database server per system(1) optional redundant database server per system
Uses off-the-shelf PC with the following minimum specifications:
Processor:....................................... Intel Pentium IV 1GHz or greater (Dual processors recommended).
System Memory: ............................ 1GB RAMFloppy: ............................................ 3.5”, 1.44MBCD ROM:......................................... 24X or greaterSystem Storage: ............................. 40GB RAID-1 storageInput Devices: ................................. Standard Windows keyboard, mouseMonitor: .......................................... 15” SVGA colorOperating System: .......................... Windows 2000 Server
DVM Camera ServerStores video streams and transmits video to clients. Number of database servers required dependent on application, minimum of (1) per system
Uses off-the-shelf PC with the following minimum specifications:
Processor:....................................... Intel Pentium IV 1GHz or greater (Dual processors recommended).
System Memory: ............................ 1GB RAMFloppy: ............................................ 3.5”, 1.44MBCD ROM:......................................... 24X or greaterSystem Storage: ............................. 40GB storageVideo Storage: ................................ RAID-5 fault tolerant storage, capacity dependent on appli-
cationInput Devices: ................................. Standard Windows keyboard, mouseMonitor: .......................................... 15” SVGA colorOperating System: .......................... Windows 2000 Server
Optional Video Storage Subsystem (Promise Technology or NexSan)Provides additional fault tolerant (RAID-5) video storage. Scales from 10’s to 100’s of terabytes. DVM supports any Windows 2000-compatible off-the-shelf storage device including Direct or Network Attached Storage (DAS or NAS) or Storage Area Network (SAN) systems
Use Promise, NexSan or other off-the-shelf storage subsystem with the following minimum specifications:
RAID Levels: ................................... 0, 1, 3, 4, and 5Redundancy: ................................... Hot-swappable drives, hot-sparing, redundant power sup-
plies, redundant RAID controllerDrives Supported: ........................... 4, 8, 14, or 42Drive Types: .................................... Ultra ATA/133, Ultra ATA/100, or SATAData Rebuild: .................................. 40GB storageRAID Controller:.............................. RAID-5 fault tolerant storage, capacity dependent on appli-
cationSCSI Interface:................................ SCSI Ultra160O/S Supported: ............................... Windows 2000
Network SwitchesDVM Communicates using TCP/IP network protocol using industry-standard Ethernet technologies. The network switch links the video streamers to the camera server(s) andcamera servers to clients
Use off-the-shelf storage network switches with the following minimum specifications:
• Simple Network Management Protocol (SNMP)• IEEE 802.1D bridging capability and loop detection• IEEE 802.1Q tagged VLANs• IEEE 802.1 traffic prioritization for multiple QoS levels• Support for multicast traffic• Non-blocking, wire-speed access across all ports
IP Network CamerasIP Network cameras combine the video encoding and streaming functions of the video streamer with a security camera. Digital video streams that are transmitted across a standard LAN/WAN to DVM Camera Servers for indexing and storage. Use Axis Communications
AXIS:............................................... 2100, 2110, 2120, 2130, 205 (MJPEG) and 2420
Video Encoding and StreamingVideo Streamers convert analog NSTC or PAL camera images into highly compresseddigital video streams that are transmitted across a standard LAN/WAN to DVM cameraServers for indexing and storage. Use Axis Communications, MegaChips or Sungjin
AXIS:............................................... 2400+/2400+ Blade, 2401+/2401+ Blade, 241S/241Q (MJPEG) or 2411
MegaChips: ..................................... OpennetView, MD100, MJPEG encodingSungjin:........................................... CamStation CS100, CS300-1V (MPEG-4)
Analog CamerasAnalog camera signals are input into a video streamer and converted into a digital format and transmitted across a standard LAN/WAN. DVM supports industry-standard NTSC and PAL analog cameras
Fixed Camera Support
Honeywell: ...................................... Ademco e-Series, Ademco System Series, Ultrak KC Professional Series
Other:.............................................. Any NTSC or PAL analog camera
Pan/Tilt/Zoom (PTZ) Camera Support
Honeywell: ...................................... ADEMCO RapidDome/VCL Orbiter, Ultrak UltraDomeOther:.............................................. American Dynamics Speed Dome, Bosch AutoDome G3A,
Canon VC-C3/C4/C4R, Daiwa DMP 15, Ernitec Orion, Lilin FastDome, Molynx Surcha, Panasonic WVCS850/854, Pelco SpectraDome, Sony EVI-D30/D31/G20/G21
Coax
Cab
le
Coax
Cab
le
LON
Honeywell, Enterprise Buildings Integrator (EBI), EXCEL 5000 OPEN, Excel Building Supervisor (XBS), Excel Building Supervisor Integrated (XBSi), Excel Plus, Excel Classic, Excel 500, Smart Excel 500, Excel 50, Excel Security Manager (XLS/XLS1000), Excel Life Safety, Delta 1000, Delta 2000, Intelliguard 9000 (i9000) and DeltaNet FS90 are trademarks of Honeywell International, Inc. All other brands are trademarks of their respective companies.
Asset Locator - Axcess
PRODUCT FEATURES:• Real-time location tracking and status monitoring solution• Radio-frequency (RF) based tracking for area location• Low-frequency RF (Activator) based tracking for precise door/
elevator location • Tag models include: asset, personnel, cargo, vehicle, and
prisoner/wrist tags
APPLICATIONS:• Laptop and computer theft deterrence• Staff safety (location tracking and duress alarming)• Long-range, wireless vehicle gate access control• Cargo location tracking and tamper monitoring• Prisoner/patient location tracking and perimeter alarming• Casino key and cash box location tracking and theft deterrence
RF Receiver(P/N: AT-132-NR-IP & AT-132-NR-S)Ceiling mounted device that receives coded RF transmissions from Axcess tags• Read range of 35-40 ft.• 315 MHz and 433.92 MHz versions• Ethernet/Wiegand output version (P/N: AT-132-NR-IP)• RS232/Wiegand output version (P/N: AT-132-NR-S)• FCC Part 15 and EC compliance• General area location precision• -30 to 85ºC operation
Activator (P/N: AT-132-AT & AT-132-AT-D)When used with an activator antenna, it generates a “wake-up” field for all Axcess tags and forces them to transmit• Operates at 126 KHz using 24 VDC power• Standard one antenna version (P/N: AT-132-AT)• Dual antenna version for in/out vehicle gates (P/N: AT-132-AT-D)• When used with an activator antenna it provides precise loca-
tion to a small area (door, elevator cab, gate, muster zone)• Wake-up field can be adjusted using 20-turn adjustment screw• -40 to 85ºC operation
Road Loop Activator Antenna (P/N: AT-132-VL-S & AT-132-VL-D)Provides tag wake-up field for vehicles when connected to an acti-vator and mounted in roads or non-metallic doorway floors• Single lane road loop version (P/N: AT-132-VL-S)• Dual lane road loop version (P/N: AT-132-VL-D)
Flex Activator Antenna (P/N: AT-132-A-F)Very thin activator antenna encapsulated in a Kapton sheet. Designed to go under carpet, inside of non-metallic turnstiles or inside walls• 10.5 x 21 inches in size• Range up to 8 ft. for personnel tags and 6 ft. for asset tags
Overhead Activator Antenna (P/N: AT-132-A-PO)Activator antenna constructed of plexiglas, which is made to be installed in a ceiling (replaces one ceiling tile)• 21 x 21 inches in size• Range up to 8 ft.
Plex Activator Antenna (P/N: AT-132-A-PT & AT-132-A-PW)Activator antenna constructed of plexiglas, which is made to be installed above or next to a door• Thin plex antenna is 4.5 x 37 inches in size (P/N: AT-132-A-PT)• Thick plex antenna is 9 x 52 inches in size (P/N: AT-132-A-PW)• Range up to 8 ft. for personnel tags and 3 ft. for asset tags
Picture Frame Activator Antenna (P/N: AT-132-A-F8 & AT-132-A-F10)Activator antenna that is integrated into a picture frame to provide unobtrusive monitoring• Standard size is 16 x 20 inches (P/N: AT-132-A-F8)• Large size is 20 x 26 inches (P/N: AT-132-A-F10)
Axcess Tag Styles• Standard tags only provide location change events only when
they enter activator fields• Beacon tags provide location change events when they enter
Activator fields and when they move between areas covered by Receivers. The standard beacon rate is once per hour however, through special orders this can be set from once per minute to once every 18 hours
Asset Tags (P/N: AT-132-A, AT-132-A-B, AT-132-A-T, AT-132-BT)Water-proof tags that attach directly to equipment (laptops, com-puters, etc.) to monitor location and generate perimeter alarms in conjunction with activators and RF receivers. Tags are 1.25 x 2.56 x 0.38 inches• Standard asset tag (AT-132-A) and with tamper (AT-132-A-T)• Beacon asset tag (AT-132-A-B) and with tamper (AT-132-A-BT)
Key Fob Tags (P/N: AT-132-PF-R, AT-132- PF-C, AT-132-RF)Fob style tags that are designed to be attached to key rings. Tags are 1.31 x 2.81 x 0.31 inches• Standard tag with replaceable battery – not water-proof
(AT-132-PF-R)• Standard tag with replaceable battery and duress alarm – not
water-proof (AT-132-PF-C)• Ruggedized standard tag “casino key tag”– water-proof
(AT-132-RF)
Metal Mount Tags (P/N: AT-132-M, AT-132- M-B, AT-132-M-BA)Rugged, water-proof, chemical-resistant tags designed for harsh environments and for direct mounting to metal objects (metal cases, truck bumpers). Tags are 2.19 x 4.13 x 0.56 inches• Standard metal mount tag (AT-132-M)• Beacon metal mount tag (AT-132-M-B)• Beacon metal mount tag with temperature sensor
(AT-132-M-BA)
Cargo Tag (P/N: AT-132-L)Rugged, water-proof, chemical-resistant tags designed for direct mounting to metal cargo containers. Tamper detect wire included which loops through cargo lock. Tags are 2.19 x 4.13 x 0.56 inches• Standard cargo tag (AT-132-L)
Personnel Tags (P/N: AT-132-P, AT-132-P-B)The water-proof personnel tags are standard ISO prox size and have a slot for clip or lanyard attachment. Tags are 2.19 x 3.44 x 0.25 inches• Standard personnel tag (AT-132-P)• Beacon personnel tag (AT-132-P-B)
Vehicle Tags (P/N: AT-132-V, AT-132-V-D)The water-proof vehicle tags are standard ISO prox size and are made to mount on the inside windshield of cars and trucks. Tags are 2.19 x 3.44 x 0.25 inches• Standard vehicle tag (AT-132-V)• Standard vehicle tag with tamper disable (AT-132-V-D)
Wrist Strap/Prisoner Tag (P/N: AT-132-W)Rugged, water-proof tag designed to be attached to wrists or ankles of prisoners or patients for location tracking and perimeter alarming. Attachment of tag arms the conductive tamper strap, which then generates a tamper alarm if it is ever cut. The tamper strap is disposable• Standard wrist strap tag (AT-132-W)
Asset Locator - A real-time location tracking and monitoring solution for people and equipmentHoneywell Asset Locator supports two hardware solutions, which enable it to be customized for most markets and applications
Asset Locator-Elpas – High-performance solution targeted at health-care and museum applications
Asset Locator-Axcess – Cost-effective solution targeted at com-mercial, industrial, prison, airport, education, seaport, and casino applications
Asset Locator - Elpas
PRODUCT FEATURES:• Real-time location tracking and status monitoring solution• Infra-Red (IR) based tracking for room-by-room location• Radio-Frequency (RF) based tracking for area location• Low-Frequency RF (LF) based tracking for precise door/elevator
location • Tag models include: equipment, personnel, baby, mother, pediatric/
Alzheimer and alert
APPLICATIONS:• Infant abduction deterrence and mother-baby matching• Pediatric abduction deterrence• Patient wandering deterrence and duress alarming• Medical equipment location tracking and theft deterrence• Staff safety (location tracking and duress alarming)
i.LON® 600 RouterProvides network connectivity between Ethernet LAN and LONTalk (FTT-10A) bus
Physical Layer Repeater/PLR (P/N: ERS02001)Extends reader network beyond 64 node limit• Extends free topology bus length by 500 meters• Up to 50 IR or RF readers per PLR• Up to 9 PLRs per LON channel (per iLON 1000® router)
IR Reader (P/N: RDT00001)Ceiling mounted device that receives coded IR transmissions from Elpas tags• Read range up to 40 ft.• Room-by-room location precision
External Relay Box (P/N: NXB00001)Local (reader-connected) relay to control doors, lights, and buzzers in response to InstaTrak alarms• Connects directly to IR and RF readers• 2 normally open or normally closed relays (5A/230V)
RF Reader (P/N: RDF00001)Ceiling mounted device that receives coded RF transmissions from Elpas tags• Read range up to 60 ft.• Operates at 433.92 MHz.• FCC Part 15 and EC compliance• General area location precision
LF Reader (P/N: RLF00001)Ceiling mounted device that generates a “wake-up” RF field for selected Elpas tags and forces them to transmit• Read range up to 10 ft.• Operates at 125 KHz.• Provides precise location to a small area (door, elevator cab).• Master/Slave LF readers available for larger areas• Tags with LF support: BTB00433, PTA00433, ART00433,
ETB00433, ETB00433-2, ETF00433
Junction Box (P/N: FJB00001 & EJB00001)Connects Elpas LON devices to LONTalk network• 2 reader/2 LON backbone connect version (FJB00001)• 4 reader/4 LON backbone version (EJB00001)
Elpas Tag Styles• Personal badges. Transmits periodically, duress button option
Types include combinations of IR/RF and triple technology with temperature measurement
• Alert tags. Combinations of IR/RF with various button/pull activations
• Equipment tags. Combinations of IR/RF with without inputs and triple technology with temperature measurement
• Health care baby tags. Wrist tag & pediatric tag using combina-tions of IR/RF and supervised inputs
Baby Tag (P/N: BTB00433)Water-resistant tag attaches to baby's ankle to monitor location and generates perimeter alarms in conjunction with LF and RF readers• Tamper-proof band will generate alarm if removed• New disposable cap/band used for every baby (P/N: BTB90001)
Wrist Mother/Patient Tag (P/N: PWB00901 & EWB00001)Water-resistant tag attaches to patient's wrist using standard hospital strap• IR version (P/N: EWB00001), IR/RF version (P/N: PWB00901)• When used in conjunction with baby tag and BabyMatch applica-
tion, pressing mother tag button initiates match process
Pediatric/Alzheimer’s Tag (P/N: PTA00433)Water-resistant tag attaches to patient's wrist using standard hospital strap to monitor location and generates perimeter alarms in conjunc-tion with LF and RF readers• Tamper-proof wire will generate alarm if removed.• New disposable cap/wire used for every patient (P/N: PTA90001)
Personnel Tag (P/N: ERS01201, PBE00433 & ETB00433-2)Clip-on tag is used for location tracking and duress alarming• IR version (P/N: ERS01201), IR/RF version (PBE00433), IR/RF/LF version (ETB00433-2)• Button on the back of the tag can be used to generate personal
duress/ attack alarms
Alert Tag (P/N: ALB00001, PLB00001 & ART00433)Tag with strap is designed to be worn around the neck or carried. Large button makes it easy for the elderly to initiate a duress or panic alarm• IR version (P/N: ALB00001), IR/RF version (PLB00001), RF/LF ver-
sion (ART00433)
Rectangular Equipment Tag (P/N: ETB00433 & ETF00433)Attaches to equipment to monitor location and generate perimeter alarms in conjunction with RF and LF readers• IR/RF/LF version (P/N: ETB00433) and RF/LF version (ETF00433)• Optical tamper sensor on the back of the tag will generate alarm if
the tag is ever removed• Wire inputs can be used to monitor equipment run-time or open/closed status of equipment
Oval Equipment Tag (P/N: EQB00901, EQB00903 & WSE00433)Water-resistant tag to monitor location and status of equipment. • IR version (P/N: EQB00901), IR version with wire inputs
(EQB00903) and IR/RF version with wire inputs (WSE00433)• Wire inputs can be used to monitor equipment run-time or open/
closed status of equipment
System DescriptionBase System Includes 50 metersAdder 1 10 meter adder to baseAdder 2 50 meter adder to baseAdder 3 100 meter adder to baseAdder 4 250 meter adder to baseAdder 5 1000 meter adder to baseOptionsLoad Management Adder to baseWeather Data Adder to base
Energy Manager - Understand and Control Energy
PRODUCT FEATURES:• “Out-of-the-box” solution for energy data collection, cleaning, analysis, and reporting, plus load
management and control• Flexible, hierarchical modeling of your energy system that can include circuits, equipment, meters,
tenants, weather stations, locations, and more• Automatic data cleaning removes or reduces the impact of meter failures, dropouts, and spikes• Exceptionally powerful drag-and-drop reporting using tools that you are already familiar with • Software-based solution; compatible with virtually any utility metering device that can be interfaced
to EBI. Supports electric, gas, water, fuel oil, and other meter types• Automatic load shedding based on demand limits and configurable algorithms• Automatic generator control for peak shaving, including email notifications and approvals• Electrical and gas load forecasting with wizard-based configuration• Weather data can be read from local weather stations or the internet and incorporated into reports• Thermal load forecasting• Baseline import wizard• Environmental and greenhouse gas reporting• Automatic unit conversion for data collection and reporting. Conversion of fuels to common energy
units to allow fuel comparisons
Energy Manager Foundation:Energy Manager Foundation is built upon the Energy System Model. This model describes the objects within your energy system and the relationships between them. The objects that can be included in your Energy System Model are:
• Meters (real and virtual) • Localities (geographical locations, campus, building, building area)• Equipment (lighting, boiler, chiller, general)• Circuits (grouping of loads and generators)• Tenants • Weather stations
Benefits of Energy Manager• Identify and reduce peak energy demands that are driving up costs• Implement powerful load curtailment strategies• Validate and understand utility data• Help optimize your equipment start and stop times• Provide the data to negotiate lower energy rates• Uncover employee equipment overrides that increase costs
Utilities Supported• Electric • Gas • Water• Fuel Oil • Steam• User-defined
Meter Management• LonWorks• Modbus• OPC• Pulse Accumulators/Totalizers• Data Validation and Spike Detection• Data Cleaning and Filling
Enterprise Demand Management• Load monitoring with automatic alarming and event logging• Loads can be shed according to various strategies to curtail costly spikes in demand• Load management operator displays with real-time visualization and tuning
Internationalization• Energy Builder and Operator Display content can be configured in local language
Server Requirements• 1024 MB RAM (recommended), 512 MB (minimum)• 1 GHz Pentium III Processor• 25MB per meter per year hard disk storage (approximate)• Windows 2000 Server
Client Requirements• Per EBI Release 200.2 requirements
Licensing• Energy Manager Foundation license model is based upon the number of meters
combined with a 10-pack incremental adder option• Enterprise Demand Management is sold as an option to the base system• Enterprise Load Management and Advanced Energy Modeling options are sold as
options Energy Manager Foundation
* Tailored Solutions Available for:• Rates analysis• Tenant billing• Energy (electric, gas) and thermal (heating and cooling) load forecasting• Real-time-pricing (RTP) based control• Data import and export• Equipment modeling and optimization• Measurement and Verification (M&V) and operations reports
Architecture Options• Energy Manager can either be installed on an existing EBI Server (typical) or on a dedicated
EBI server to be interfaced to your existing EBI network via EBI’s DSA capability• For large sites, the reporting engine of Energy Manager can be installed on a dedicated
Report Server to maximize reporting performance
Architecture OptionsArchitecture OptionsArchitecture Options
Meters• Veris Industries (www.veris.com)• Power Measurement Limited
(www.pwrm.com)• Square D (www.squared.com)• WattNode by Continental Controls
(www.ccontrolsys.com)
TCP/IP
LonWorksMeter
Pulse
Pulse
LON
LonWorksMeter
EXCEL 500
Ethe
rnet
i.LON® 600 RouterProvides network connectivity between Ethernet LAN and LONTalk (FTT-10A) bus
Automation and Control SolutionsHoneywell Honeywell Limited-Honeywell Limitée1985 Douglas Drive North 35 Dynamic DriveGolden Valley, MN 55422 Scarborough, Ontario M1V 4Z9
www.honeywell.com77-2148 04/04 Printed in the USA on recycled paper containing 10% post consumer waste.