Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
www.DEWALT.com/anchors 19
GeneRal InfoRMaTIon
TecH
Man
Ual
– M
ecHa
nIca
l an
cHoR
s ©
2013
DeW
alT
PRI
nTeD
6/1
3m
eCHan
iCal
an
CHo
rSgeneRal InfoRmaTIon
PtB-Pro Part 6Throughbolt
ProDUCt DeSCriPtion
With an eTaG 001 Part 6 approval the PTb-PRo M6 is a small size throughbolt for multiple connection in non-structural applications. There is a fully threaded stud and a wire hanger version available for a wide range of applications and easy installation.
General aPPliCationS anD USeS
featUreS anD BenefitS
•Price competitive anchoring for all kinds of ceiling and suspended installation
•anchor can be easily installed through attachments
•Wire hanger version does not need to be pre-tensioned
aPProValS anD liStinGS
ETAG 001 Part 6 F120
loaDinG ConDitionS
STATIC QUASI-STATIC
SUitaBle BaSe materialS
secTIon conTenTsGeneral Information
Installation Information
Design Information
Material Information
ordering Information
assembly
Hexagon nut
Washer
bolt
clip
VeRsIonsHexagon nut
carbon steel, Zinc Plated
Wire Hanger
carbon steel, Zinc Plated
appRoVals• eTa-13/0355
www.DEWALT.com/anchors20
InsTallaTIon InfoRMaTIon
TecH ManUal – M
ecHanIcal ancHoRs ©2013 D
eWalT PRInTeD 6/13
meC
Han
iCal a
nCHo
rS
InsTallaTIon InfoRmaTIon
inStallation Data
notation UnitpTb-pRo
m6 m6-wire hanger
anchor diameter d [mm] 6 6
nominal drill bit diameter d0 [mm] 6 6
Diameter of hole clearance in fixture df [mm] 7 -
effective embedment depth hef [mm] 35 35
Drill hole depth h1 [mm] 45 45
Minimum member thickness for hmin hmin [mm] 80 80
Minimum spacing smin [mm] 200 200
Minimum edge distance cmin [mm] 105 105
Installation torque Tinst [nm] 10 -
Torque wrench socket size sw [mm] 10 -
hmin
hef
d0
df
Sw
tfix
Tinst
h1
inStallation inStrUCtionS
1.) Using the proper drill bit size, drill a hole into the base material to the required depth.
2.) Remove dust and debris from the hole using a hand pump or compressed air.
3.a) Insert the stud anchor into the drilled hole through the fixture.
3.b) Insert the wire hanger anchor into the drilled hole; anchor is self-expanding by loading.
4.) Tighten the stud anchor with a torque wrench by applying the required installation torque Tinst.
for complete installation instructions, see technical approval.
www.DEWALT.com/anchors 21
TecH
Man
Ual
– M
ecHa
nIca
l an
cHoR
s ©
2013
DeW
alT
PRI
nTeD
6/1
3
DesIGn InfoRMaTIon
meC
Han
iCal
an
CHo
rSDesIgn InfoRmaTIon
loaD CaPaCitieS - ParameterS for CalCUlation of DeSiGn StrenGtHAccording to ETAG 001 Annex C Method C.
notation UnitpTb-pRo
m6
capacity for all directions and failure modes
Uncracked and cracked concrete
characteristic resistance c20/25 to c50/60 f0Rk [kn] 4.0
Partial safety factor gMp
1) [-] 2.12)
Design resistance c20/25 to c50/60 fRd [kn] 1.9
characteristic spacing scr [mm] 200
characteristic edge distance ccr [mm] 105
steel failure with lever arm
Steel failure with lever arm (bending)
characteristic resistance M0Rk,s [nm] 9.3
Partial safety factor gMs
1) [-] 1.5
1) In absence of other national regulations
2) Partial safety factor of g2 = 1.4 is included
maTeRIal InfoRmaTIon
material SPeCifiCation
4
3
1
2
part no. Designation material protection
1 bolt M6 (all versions) cold formed carbon steel, grade c-1035 Zinc plated 5 µm
2 expansion clip carbon steel Zinc plated
3 Washer DIn 125, DIn 9021 or en Iso 7089 Zinc plated
4 Hexagonal nut DIn 934 or DIn en Iso 4032, Grade 8 acc. to DIn en Iso 20898-2 Zinc plated
oRDeRIng InfoRmaTIon
art. no. Type Dia.
[mm]length [mm]
box qty.
carton qty.
PTB-PRO PaRT 6
PTB-PRO Part 6
DfM1110000 PTb-PRo M6x55 standard anchor - zinc plated M6 55 100 800
DfM1210600 TW M6x55 Tie wire hanger M6 55 100 400
PTB Tie wiRe