FSE Single Page1

8/3/2019 FSE Single Page1

1/7

Next Generation

TRAINING SIMULATION

3D PACTand3D PROCESS VISUALISATION

Next Generation

TRAINING SIMULATION

FSEAdvanced Simulation Software Suite


2/7

FSEAdvanced Simulation Software Suite

FSE is an Advanced Simulation Software Suite that was

developed by M-Tech Industrial (Pty) Ltd, together with Samahnzi

through the Innovation Fund, a business unit of the Department

of Science and Technology of South Africa.

FSE is a powerful, integrated software platform which enables

engineers to develop High Fidelity, Full-scope Power and

Process plant Simulators quicker than ever before. It sports a

modern, intuitive graphical user-interface which makes it exciting

to develop, analyze and train on.

FSE sports a totally open, customizable architecture.

The following high delity, congurable solvers and libraries are

by default included in FSE:

Multi-Phase Flow with Incondensable Gases

Consists of more than 50 high-delity, congurable thermal-uid

simulation components including basic and advanced Pipes,

Valves, Tanks, Turbines, Pumps, Compressors, Fans, Reactors,

Heat Exchangers and complex Heat Transfer components.

Using any Microsoft .NET capable programming language,

engineers can easily develop and integrate their own solvers,

libraries, schedulers or even conrol all simulator functionality

from an external application.

The power of FSE comes from embracing the latest software

technologies and engineering strategies. This not only enables

quicker development of Full-scope Plant Simulators, but also

delivers higher accuracy, which truly allows engineering analysis

and operator training on the same simulation platform, at no

extra cost.

FSE includes full instructor and trainee assessment functionality,

allowing Power and Process Plant Instructors to develop

complex scenarios to train and evaluate learners.


3/7

Electrical Networks:

Includes all components necessary to simulate a complete electrical network for a Full-scope Plant Simulator, such as basic and advanced

models for Motors, Generator, Exciters, Buses, Breakers, Isolators, Resistive Loads, Innite Grid etc.

Distributed Control Systems

FSE contains a comprehensive DCS library capable of simulating an entire Power/Process Plants Control System (including Boiler,

Turbine and Generator Control and Protection) according to a prescribed control philosophy.


4/7

Human System Interface:

FSE contains all necessary functions and components to replicate or connect to a 3rd party HMI/SCADA. This includes connecting to

an Emulator or actual HMI System supplied by the Control System OEM (e.g. Siemens, ABB, Emerson, GE, etc.). The Simulator HMI will

therefore accurately reect the look-and-feel of the actual Plant Control Interface.

Mechanical:

Includes Shafts, Thrust and Journal Bearings, Barring Gear, Heat Leaks, Expander Components, etc.


5/7

Furnace:

Used to simulate Drum Boilers, Once-through/Benson Boilers (Sub- and Supercritical), Circulating Fluidised Bed Boilers, including

components like Combustion/Fire, Gas Burners, Oil Burners, Coal Burners, Pyrometers etc.

Mill/Pulveriser:

Includes Vertical Spindle and Tubular Ball Type Mill models, as well as the capability to add custom Mill models.


6/7

Actuators:

Includes analog and digital Motorized, Fluid, Solenoid,

various I to P, Manual etc.

Transmitters:

Includes more than 20 types of Switch and Transmitter

Models for pressure, temperature, speed, level, ow, voltage,

current etc.

Nuclear:

Includes models for Pressurized Water Reactor, High

Temperature Gas-cooled Reactor, etc.

Recent Full Scope High Fidelity Training Simulators

developed on FSE:

Matla Power Station Operator Training Simulator:

Unit Type: Drum Boiler - 600MW electrical

output Common Plant and

Electrical Operating Desk

Unit/BOP Controls: ABB Melody and 800xA -

Emulated

Turbine Controls: Mauell - Simulated

Contact Person: Pieter Bresler (ABB)

+27 82 773 4385

Attala Power Station Operator Training Simulator:

Unit Type: 2-on-1 Combined Cycle Plant

500MW electrical output

Unit/BOP Controls: Emerson Delta V - Emulated

Turbine Controls: GE Mark VI - Emulated

Contact Person: Gary Herrin (Entergy)

+1 501 454 4369

Wygen 3 Power Station Operator Training Simulator:

Unit Type: Drum Boiler Unit 100MW

electrical output

Unit/BOP Controls: ABB Harmony/Process Portal B

- Emulated

Turbine Controls: Siemens PCS 7 - Simulated

Contact Person: Mark Gregg (Simgenics)

+1 817 909 2267

Gilbert 3 Spurlock Power Station Operator Training

Simulator:

Unit Type: Circulating Fluidised Bed Boiler

Unit 300MW electrical output

Unit/BOP Controls: ABB In 90/800xA - Simulated

Turbine Controls: GE Mark VI - Emulated

Contact Person: Nick Pitakis (Spurlock)

+1 606 883 3165


7/7

South Africa

Samahnzi (Pty) Ltd.

Block I, Techno Link, 63 Regency Drive

Route 21 Corporate Park

Irene, Pretoria

South Africa

Tel: +27 (0) 12 345 5702/3

Fax: +27 (0) 12 345 5704

e-mail:[email protected]

www.samahnzi.co.za

Australia

FlowSim (Pty) Ltd.

10 Tenterfeld Drive

Narre Warren South, VIC 3804

Tel: +61 (0) 3 8790 1087

Fax: +61 (0) 3 9445 9221

e-mail: [email protected]

www.fowsim.com.au

United States

SimGenics Corporation

2059 Spur Cross Road

Grand Junction, CO 81507

Tel: +1 (817) 473 9191

Fax: +1 (817) 736 0427


www.simgenics.com

South Africa

M-Tech Industrial (Pty) Ltd.

Block E & F, 24 Totius Str

Potchefstroom

South AfricaTel: +27 (0) 18 297 0326/7

Fax: +27 (0) 18 297 0318


www.mtechindustrial.com

Partnerships

Documents

FSE Single Page1