Embed Size (px)
Citation preview
Form No. 906305
Replaces 904986
2140/2170
J I W
SERVICE PARTS MANUAL l!I
Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number.
The Mower Conditioner model and serial number is on a plate located on the left side of the Swing Frame at the Steering Post Pivot. "Right" and "left" are determined from a position standing behind the Mower Conditioner. From this position, the Drawbar and Positioner are on the "left" side.
GEHLe Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units.
NOTE: On original tire replacement, company policy prohibits the sale of replacement tires for all GEHL machinery. Replacement Wheel Sets are available and tire size information is called=out with the Wheel Sets to facilitate replacement tire selection. ALL REPLACEMENT TIRES MUST BE PURCHASED LOCALL Y.
Grease fittings and common attaching hardware, such as Cotter Pins, Set Screws, Woodruff Keys, Screws, Nuts, etc., are included in the parts lists, indented below the part it is (they are) associated with, but NOT illustrated, except where a particular routing or special fastening arrangement MUST be maintained. The hardware listed is for mounting purposes and is NOT included when the part is ordered for replacement. Refer to the abbreviations table, located on this page or on the inside back cover of this manual, for the various fastener descriptions. For the part number of related fasteners, refer to the Attaching Hardware Table on the inside back cover of this manual. Standard attaching hardware torque values are also provided on the inside back cover.
Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts arc Grade A.
NOTE: The following abbreviations are used herein:
AR .. - As Required ASSY - Assembly BRG .. - Bearing CB - Carriage Bolt CS - Cap Screw (Hexagon Head) DIA - Diameter DEG .. - Degree FCS .. - Flanged Cap Screw (Hexagon) FHMS - Flat Head Machine Screw FHSCS - Flat Head Socket Cap Screw
FLN . - Flanged Lock Nut (Hexagon) FT. . - Foot or Feet FLS . - Flanged Lock Screw (Hexagon) GR . - Grade I.D. .. - Inside Diameter HVY . - Heavy HYD .. - Hydraulic INCL .. - Includes
'INCLD . - Included INT . - Internal JIC . - Joint Industry Conference IN. . -JamNut L .. . - Lock (Washer) LH . - Left Hand LN . - Lock Nut (Hexagon) LT. . - Left M. . - Metric MMlmm - Millimeter N .. - Nut (Hexagon) NF .. · . - National Fine NILN · . - Nylon Insert Lock Nut NPT. · . - National Pipe Thread NPTF · . - National Pipe Thread Fine O.D. · - Outside Diameter OH · - Oval Head P .. · - Plain (Washer) PTO · - Power Take Off RED . - Reducer RH ... - Right Hand RHMS . - Round Head Machine Screw RHSQNB - Round Head Square Neck Bolt RPM .. - Revolutions Per Minute RT .. . - Right SAE ... - Society of Automotive Engineers SBHS . - Socket Butt Head Screw SHCS .. - Socket Head Cap Screw SHSS .. - Socket Head Set Screw SHSS-SL - Socket Head Set Screw-Self Locking SN .... - Serial Number or Slotted Nut SPKT . Sprocket SQ .... - Square SQHSS . - Square Head Set Screw ST .. . - Street T ..... - Tooth or Teeth THMS . - Truss Head Machine Screw WDRF . - Woodruff WLDMT - Weldment WLN .. - Whiz-lock Nut WI .... - With W/O ... - Without WHCS . - Washer Head Cap Screw # ..... - Number
TABLE OF CONTENTS
Page
Introduction ......................................... . Inside Front Cover Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Standard Hardware Torque Specifications ..... . . . . . . . . . . .. ..... Inside Back Cover Attaching Hardware Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
Decal Locations ...................................................2-3 Tongue (After SN11700-2140 & SN22200-2170) ................................. .4 Tongue (Before SN1170 1-2140 & SN22201-2170) .................................5 Trailer Frame, Leg & Pusharm ...........................................6-7 Pusharm & Hydraulics(After SN11700-2140 & SN22200-2170) ...... . . . . . . . .8 Pusharm & Hydraulics(Before SN11701-2140 & SN22201-2170) ......................... 9 Forming Chamber(After SN12000-2140 & SN22800-2170) ............................ 10 Forming Chamber(Before SN12001-2140 & SN22801-2170) ........................... 11 Header Frame & Conditioner Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 WheelAssembly ................................................... 14 Pitman Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Gearbox (AfterSN11700-2140 & SN22200-2170) ................................. 16 Gearbox (Before SNI1701-2140 & SN22201-2170) ................................ 17 Conditioner (Left Side) ............................................... 18 Conditioner (Right Side) .............................................. 19 Reel Variable Drive ................................................. 20 Pitman & Wobble Arm Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 21 Reel ....................................................... 22-23 Sickle & Guards, 2140 ............................................. 24-25 Sickle & Guards, 2170 ............................................. 26-27 PTO Tower (After SN11700-2140 & SN22200-2170) ............................... 28 PTO Tower With 092009 CV Joint Kit (Before SN11701-2140 & SN22201-2170) ................ 29 PTO Tower (Before SN11701-2140 & SN22201-2170) .............................. 30 Telescoping Drive (Tower To Tractor)(After SN11700-2140 & SN22200-2170) ................. 31 Telescoping Drive (Tower To Tractor)(Before SN11701-2140 & SN22201-2170) ................ 32 Hitchjacks ...................................................... 33 Options & Accessories ............................................. 34-38
Mechanical Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Hydraulic Tongue Positioner ......................................... 35-36 Center Skid Shoe & Cutter Bar Wear Plate ................................... 37 Tall Crop Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Narrow Windrow Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 38
Numerical Index ................................................. 39-42
Printed In U.S.A. 906305/1 P192
DECAL LOCATIONS GENERAL INFORMATION PAINT NOTICE Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decal(s) become damaged or the machine is repainted. Refer to the listing for the illustration reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustration(s) for replacement location(s).
To insure proper selection of the correct replacement decals, compare all of the various closeup location photographs to your machine, before starting to refinish the unit. Then, circle each pictured decal (on or otherwise applicable to your machine) while checkingoff its part number in the listing. After you have verified all the decals needed for replacement, place any extra unnecessary decals aside for disposal.
NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new Decal. To apply, remove the smaller portion of the decal backing paper and apply this part of the exposed adhesive backing to the clean surface while maintaining proper position and alignment. Peel the other portion of the backing paper off slowly while applying hand pressure to smooth-out Decal surface.
A CAUTION ALWAYS observe Safety Rules shown on Decals. If Decals become damaged, or If the unit Is repainted, replace the Decals. If repainting, BE SURE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit.
Front Master 7
Use this list to order paint for refinishing: 901225 One Gallon Blaze Paint 901226 One Gallon Maize Paint 610239 6 (120z Spray Cans) Blaze Paint 610240 6 (120z Spray Cans) Maize Paint
The Decal Set Number for the MC2140 and MC2170 is 117857. The Set includes the following:
Ref. Part No. Number Description & Quantity
1. 060510 Decal· Jack Storage Position 2. 060511 Decal· Jack Lift Position 3. 061201 Decal· GEHL (3 Places) 4. 067493 Reflector· Red (2 Places) 5. 075749 Decal· Drive Line 1 6. 082648 Decal· 2170 (2 Places)
082677 Decal· 2140 (2 Places) 7. 082666 Decal· Push Bar 8. 091444 DANGER· Rotating Drive Line (2 Places) 9. 093020 Decal· Lubrication
10. 093365 WARNING· Rotating Component (2 Places)
11. 093366 Decal· Manual Location 12. 093367 WARNING· Manual 13. 093373 WARNING· General 14. 093381 WARNING· Lock Pin 15. 093466 WARNING· 540 RPM 16. 093643 DANGER· Moving (2 Places) 17. 093653 WARNING· Rotating Drive Line 18. 115974 WARNING· Block (2 Places)
NOTE: Order PN 090910 for 24 yd ro/l of replacement Striping
906305/1 P192 2 Printed In U.S.A.
8
Printed in U.S.A. 3 906305/1 P192
MC2140/2170 - TONGUE
(AFTER SN11700-2140 & SN22200-2170)
Ref. Part No. No.
01 330 -33269 076589 076590 081374
02 097775
090943
03 220-32514 650650
04 056773
05 097859 072330
7 Qty.
Part Name Req.
GUARD/TIRE . ... . .. . . .. . . ..... . 1 FLS 3/8X1 (FLN) . . .. ... . .... . .. 2 FLS 1/2X1 .............. . . ..... 2 NUT/HEX FL WHIZ 1/2 . ... .... . 2
DRAWBAR/ASSY . . . ... . .... . .. .. 1 (AFTER SN 12000-2140 & 22800 -2170) DRAWBAR/ASSY ... .. ...... . . . . . 1 (BEFORE SN12001-2140 & SN22801-2170) PIN/WLDMT . . .. . ..... . . .. . ... . .. 1
CS 1/2X3-1/2 (LN) . . . .. .... .. .. 1 CLIP (5/ 16 N,L) .. . ..... ..... .. . . 1 (BEFORE SN11801-2140 & SN22648-2170) CLAMP .. .. ... .. .. . .. .. .. . . .. . . . 7
SCREW/SELF TAPPI NG .. . . .. . . 7 (AFTER SN12000-2 140 & 22800 -2170)
Ref. Part No. No.
08 124127
097596
09 170-33762 10 170-33767 11 0888418
071119 8
12 059743 13 048967
14 803098
Before SN12001-2140 &SN22801-2170
Qty. Part Name Req.
HOSE/ASSY .. . ... . . .... . . .. .. . .. 1 (AFTER SN12300-2 140 & SN23500-2170) HOSE/ASSY ........ .... . . . .. . . . . 1 (BEFORE SN12301-2140 &
SN23501-2170, AFTER SN 12000-2140 & 22800-2170) HOSE/ASSY ... . . .. .. . . .... , ... .. 1 HYDRAULIC LINE/ASSY . . ..... . . 1 JACK ........ .. . . . . .. . ........ . . 1 (2170 AFTER SN24000) JACK . . . . ..... .. . ... .. .......... 1 (2140 & 21 70 BEFORE SN24001) HUB/JACK (WELD -ON) .. . . . ... .. . 2 CLAMP . . ... ...... . .. .. ... . ... . .. 1 (AFTER SN11800-2140 & 22647-2170) CHAIN /SAFETY ..... ... . . . . . .. . .. 1 (OPTIONAL)
06 087758 PLATE/HITCH TOP . . . . . ... . .. ... 1 8) For breakdown, see page titled Hitchjack 650710 CS 5/8X2-1 /4 (L) . .. ....... . . . .. 4
07 087756 PLATE/HITCH ASSY LOWER . . . . . 1
906305/1 P192 4 Printed In U.S.A.
MC2140/2170 - TONGUE
(BEFORE SN11701-2140 & SN22201-2170) / '1
/ , / I
Ref. Part No. No.
01 330-33269 076589 076590 081374
02 120-32769 03 220-32514
650650 04 056773
05 390-21979
06 087758
040-33324
650710
- -'-- - - '1
Y I
/
Qty. Part Name Req.
GUARD/TIRE ................... 1 FLS 3/8X1 (FLN) .. .... ...... .. . 2 FLS 1/2X1 .............. . . ... .. 2 NUT/HEX FL WHIZ 1/2 ......... 2
DRAWBAR/ASSY . ... ... ......... 1 PIN/WLDMT ..... . ............... 1
CS 1/2X3-1/2 (LN) ............. 1 CLAMP ..... ...... ..... .. ....... 5 (AFTER SIN 11500-2140 & SN21500-2170) CLIP (5/16 N,L) ................. 6 (BEFORE SN11501-2140 & SN21501-2170) PLATE/HITCH TOP . .. ..... ..... . 1 (AFTER SIN 11500-2140 & SN21500-2170) P LA TE/H ITC H TOP ... . ... .. .... . 1 (BEFORE SN11501-2140 & SN21501-2170)
CS 5/8X2-1/4 (L) .. .. ........... 4
Ref. Part No. No.
07 087756
040-33323
08 170-33762 09 170-33767 10 071119 a 11 059743 12 048967
13 803098
Qty. Part Name Req.
PLATE/HITCH ASSY LOWER .. ... 1 (AFTER SIN 11500-2140 & SN21500-2170) PLATE/HITCH LOWER . ...... . ... 1 (BEFORE SN11501-2140 & SN21501-2170) HOSE/ASSY ..................... 1 HYDRAULIC LlNE/ASSY ......... 1 JACK .......... .. ...... .... ..... 1 HUB/JACK (WELD-ON) .... . ..... . 2 CLAMP ........ .. .. , ... .. . . ...... 1
(AFTER SIN 11500-2140 & SN21500-2170) CHAIN/SAFETY .. .... .. ........ .. 1 (OPTIONAL)
a) For breakdown, see page titled Hitchjack
Printed In U.S.A. 5 90630511 P192
MC2140/2170· TRAILER FRAME, LEG & PUSHARM
18
~~5 16
2140 & 2170 Before SN24001
90630511 P192 6 Printed In U.S.A.
MC2140/2170 - TRAILER FRAME, LEG & PUSHARM
Ref. Part No. No.
01 220-32516 650495
02 097407
082701
650709 097772
120-32764
03 030-17662 04 360-32500 05 045-31407 06 360-32499 07 330-33279
650533 08 200-32506
570019 650709
09 250-32506 10 380-32350 11 200-32507 12 030-31904 13 081377 14 220-32517
570014 15 310-32513
570014
16 480-27676
18 240-32043 570014
19 070856 20 045-31406 21 117085d
090871 de
082603bc
aty. Part Name Req.
PIN/PUSH ARM PIVOT .......... 1 CS 1/2X1-1/4 (N,L) ............. 1
FRAME/TRAILER ASSY(2140) ... 1 (AFTER SN12000-2140) FRAME/TRAILER ASSY(2140) ... 1 (BEFORE SN12001-2140)
CS 3/4X4 (N,L,P) ............... 2 FRAME/TRAI LER ASSY(2170) ... 1 (AFTER SN22800-2170) FRAME/TRAILER ASSY(2170) ... 1 (BEFORE SN22801-2170) CS 3/4X10 (N,2P) ............... 2 SPACER ........................ 2 BUSHING ....................... 2 SPACER ........................ 2 DEFLECTOR/THIRD LINK ........ 1
CS 3/8XH/2 (N,L.P) ........... 2 LINK/THIRD .................... 1
FITTING/GREASE .............. 2 CS 3/4X4 (N,L,P) ............... 2
YOKE/ASSY .................... 1 SPRING/FLOTATION ASSY ...... 2 PIVOT .......................... 1 U-BOL T 3/4 (2N) ................ 1 FLS 3/8X1-1/4 .................. 1 PIN\SPRING PiVOT ............. 1
FITTING/GREASE .............. 1 SCREW/SPECIAL (5/8 L) ........ 1
FITTING/GREASE .............. 1 (2140 & 2170 BEFORE SN24001) WASHER/SPECIAL .............. 1 (2140 & 2170 BEFORE SN24001) ARM/PUSH ASSY LT ............ 1
FITTING/GREASE .............. 1 NUT/LOCK SPECIAL 3/8 ......... 1 BUSHING ....................... 2 CYLINDER/HYDRAULIC ASSY ... 1 (AFTER SN12300-2140 & SN23500-2170) CYLINDER/HYDRAULIC ASSY ... 1 (BEFORE SN12301-2140 &
SN23501-2170, AFTER SN11700-2140 & SN22200-2170) CYLINDER\HYD ASSY ........... 1 (BEFORE SN11701-2140 & SN22201-2170)
Ref. Part No. No.
22 082620 a 082623
23 220-32520 650577
24 200-32504 651123
25 400-21904 26 480-27676
27 200-32505 28 380-32342 29 040-33325 30 220-32515
650491. 570002
31 220-32519 650577
32 082621 33 385-27865 34 480-42349 35 049038
36 111377
37 125882
38 125883 570014
aty.Part Name Req.
LEG/ASSY RT ................... 1 LEG/ASSY LT ................... 1 PiN/LOWER .....................2
CS 5/16X1-1/2 (LN) .............4 LINK/TRANSPORT ...............2
CS 5/8X1 (L) ...................2 WASHER/SPECIAL ..............4 WASHER/SPECIAL ..............2 CONNECTOR ....................2 SPRING/DOUBLE TORSION ......2 LIFT/FLEXIBLE ASSY ............2 PIN/WHEEL ASSY ...............2
CS 3/8X1-1/4 (LN,P) ............2 FITTING/GREASE ..............2
PiN/UPPER ......................2 CS 5/16X1-1/2 (LN) ............. 1
SPiNDLE ........................2 PLUG/SPRING ...................4 PIN/PIVOT LH ................... 1 LATCH .......................... 1 (AFTER SN12000-2140 & SN22800-2170) DOOR/ ASSY ..................... 1 (AFTER SN12000-2140 & SN22800-2170) SPACER ........................1 (2170 AFTER SN24000) SCREW/SPECIAL ................ 1
FITTING/GREASE .............. 1 (2170 AFTER SN24000)
a) Not illustrated b) For Seal Kit, order 084574 c) For replacement order 090871, (2) 068938 &
(2) 090870 d) For Seal Kit, order 093110 e) For replacement order 117085 & 054994
Printed In U.S.A. 7 906305/1 P192
MC2140/2170 - PUSHARM & HYDRAULICS
(AFTER SN11700-2140 & SN22200-2170)
Ref. Part No. No.
01 030-17662
02 117086b
090584 ae
03 380-32351 c 04 240-32029
570019 06 480-27676 07 310-32513
570014
08 220-32518 655018
09 400-32443 10 097859
072330 11 124129
124128
090006 090674
12 420-33066
~
15~ , ,. 1 ....... 1'.- .
14
Qty. Part Name Req.
CS 3/4Xl 0 (N,2P) ............... 1 CYLINDER/HYDRAULIC ASSY ... 1 (AFTER SN12300-2140 & 23500-2170) CyLINDER/HyDRAULIC ......... 1 (BEFORE SN12301-2140 & SN23501-2170) SPRING/FLOTATION ASSY RT ... 1 ARM/PUSH ASSY RT ............ 1
FITTING/GREASE .............. 1 WASHER/SPECiAL .............. 2 SCREW/SPECIAL (5/8 L) ........ 2
FITTING/GREASE .............. 2 PIN/PIVOT RT .................. 1
PIN/COTTER 3/16X1-1/4 ....... 2 WASHER/SPECIAL .............. 3 CLAMP ......................... 3
SCREW/SELF TAPPiNG ....... 12 HOSE/ASSY (2140) ............. 1 HOSE/ASSY (2170) ............. 1 (AFTER SN 12300-2140 & 23500-2170) HOSE/ASSY (2140) ....... " ... 1 HOSE/ASSY (2170) ............. 1
(BEFORE SN12301-2140 & SN23501-2170) GROMMET ...................... 2
2
Ref. Part Qty. No. No. Part Name Req.
13 117085b CYLINDER/HYDRAULIC ASSY .... 1 (AFTER SN12300-2140 & 23500-2170)
090871bd CYLINDER/HYDRAULIC ASSY .... 1 (BEFORE SN12301-2140 & SN23501-2170)
14 124127 HOSE/ASSY ..................... 1 (AFTER SN12300-2140 & SN23500-2170)
097596 HOSE/ASSY ..................... 1 (AFTE R SN 12000-2140 & SN 22800
2170, BEFORE SN12301-2140 & SN 2350 1-2170)
090673 HOSE/ASSY ..................... 1 (BEFORE SN12001-2140 & SN22801-2170)
15 068938 ELBOW/90 DEG ADJUSTABLE ....3 (BEFORE SN12301-2140 & SN23501-2170)
a) For Seal Kit order 093105
b) For Seal Kit order 093110
c) For replacement parts order 385-27865 Top Plug, 380-32350 Spring & 385-27867 Bottom Plug
d) For replacement order 117085 & 054994
e) For replacement order 117086 & 054994
906305/1 P192 8 Printed In U.S.A.
MC2140/2170 - PUSHARM & HYDRAULICS
(BEFORE SN11701-2140 & SN22201-2170)
Ref. Part Qty. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
01 030-17662 CS 3/4X10 (N,2P) ............... 1 12 420-33066 GROMMET ......................2 02 082604b CYLINDER/HYDRAULIC 2" ....... 1 13 082603ac CYLINDER/HYD ASSY ...........1 03 380-32351d SPRING/FLOTATION ASSY RT ... 1 14 170-33772 HOSE/ASSY .....................1 04 240-32029 ARM/PUSH ASSY RT ............ 1 15 054848 ELBOW .........................3
06 07
570019 480-27676 310-32513
FITTING/GREASE .............. 1 WASHERISPECIAL .............. 2 SCREW/SPECIAL (5/8 L) •....... 2
a) b)
For Seal Kit order 084574 For replacement order 090584, 090870
068938 &
08
09 10
570014 220-32518
655018 400-32443
065180
FITTING/GREASE .............. 2 PIN/PIVOT RT .................. 1
PIN/COTTER 3/16X1-1/4 ....... 2 WASHERISPECIAL .............. 3 CLAMPIINS HOSE ............... 3
c)
d)
For replacement order 090871, (2) 068938 & (2) 090870 For replacement parts order 385-27865 Top Plug, 380-32350 Spring & 385-27867 Bottom Plug .
11 170-33776 HOSE/ASSY .................... 1
Printed In U.S.A. 9 906305/1 P192
MC2140/2170 - FORMING CHAMBER
(AFTER SN12000-2140 & SN22800,:,2170)
14
Ref. Part No. No.
01 082720 330-33262
655022 400-32443
02 082697
290-32461
03 655018 400-32443
04 290-32462 650553
05 420-30377 06 090-32297 07 076958 08 390-32643
076588 09 220-32513 10 380-32348 11 220-18200
~19
aty. Part Name Req.
FLUFFER/ASSY (2140) ...... .... 1 FLUFFER/ASSY (2170) .. .... .... 1
PIN /COTTER 3/16X1-3/4 ....... 1 WASHER/SPECIAL ............. 2
CONTROLIFLUFFER ASSY . . . . . . 1 (2140 ONLY) CONTROLIFLUFFER ASSY .. ... . 1 (2170 ONLY) PIN/COTTER 3/16X1 -1/4 ... .. . ... 1
WASHER/SPECIAL .... ... .. . .. . 2 ROD/CONNECTING ....... . .. ... 3
PIN/COTTER 1/8X3/4 (3/8 P) .. . 6 GROMMET/RUBBER ... . .... .. .. 3 HANDLE/ASSY . ... ... . ..... ... .. 1 PIN/SPRING PLAIN ...... . . .. ... 1 RETAINER .. ...... . ..... ... ..... 2
FLS 3/8X3/4 (FLN) . ..... . . . . . . . 4 PIN/ASSY (73/8 P) ... . ....... ... 1 SPRING/COMPRESSION . .. . . .. . 2 PIN / ROLL . ... . . . .. ... .. .... ..... 1
Ref. No.
Part No.
13
14
097332 097334 097333 097335 082712
330-33259 15 097601
097599 16 097600
097598 072330
17 390-32696 650949
18 400-18916 19 420-33903 20 092204
092201 21 092208
092207 22 092406 23 045-31404
.,=, /"
: :/I~
I I I
Qty. Part Name Req.
WINDROWER/RT (2140) .. . ..... . 1 WINDROWER/RT (2170) ......... 1 WINDROWER/LT (2140) . . . .. ..... 1 WINDROWER/LT (2170) .. . . . ... .. 1 COVER/ASSY (2140) .. . . .. . .... .. 1 COVER/ASSY (2170) ... .. . . .. . ... 1 PLATE/CENT BACKING (2140) . .. 1 PLATE/CENT BACKING (2170) . .. 1 PLATE/SIDE BACKING (2140) .... 2 PLATE/SIDE BACKING (2170) ....2
SCREW/SELF TAPPiNG ........12 STIFFENERIVEIN(2170 ONLY) ... 2
THMS 5/16X3/4 (N ,L,P) . .. .... ..6 WASHER .... . ... ..... .. . . ...... . 1 EDGING . ... ....... .... .... . ... AR SUPPORT/ASSY LT . .. . .. .. . .. ... 1 SUPPORT/ASSY RT . . . .... ..... . 1 DIRECTOR/LEFT . .. .... .... . .. .. 1 DIRECTOR/RIGHT . .. ... .. ..... .. 1 EDGING/DIRECTOR . .. . . . .. .. .. . 2 BUSHING OILiTE .. .. ......... .. . 2
906305/1 P192 10 Printed In U.S.A.
MC2140/2170 - FORMING CHAMBER
(BEFORE SN12001-2140 & SN22801-2170)
13
14
12
19
/
Ref. Part Qty. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
01 082720 FLUFFER/ASSY (2140) .......... 1 13 082714 CHAMBER/FORMING SIDE .......1 330-33262 FLUFFER/ASSY (2170) .......... 1 RH (2140 ONLY)
655022 PIN/COTTER 3/16X1-3/4 ....... 1 330-33261 CHAMBER/FORMING SIDE ....... 1 400-32443 WASHER/SPECiAL ............. 2 RH (2170 ONLY)
02 082697 CONTROLIFLUFFER ASSY · ..... 1 14 082712 COVER/ASSY ...................1
(2140 ONLY) (2140 ONLY)
290-32461 CONTROL/FLUFFER ASSY · ..... 1 330-33259 COVER/ASSY ................... 1
(2170 ONLY) (2170 ONLY)
03 655018 PIN/COTTER 3/16X1-1/4 ......... 1 15 083690 PLATE/CENTER BACKING .......1
400-32443 WASHER/SPECIAL ............. 2 (2140 ONLY)
04 290-32462 ROD/CONNECTING ............. 3 160-32633 PLATE/CENTER BACKING .......1
650553 PIN/COTTER 1/8X3/4 (3/8 P) ... 6 (2170 ONLY)
05 420-30377 GROMMET/RUBBER ............ 3 16 083689 PLATE/SIDE BACKING ...........2
06 090-32297 HANDLE/ASSY .................. 1 (2140 ONLY) 07 076958 PIN/SPRING PLAIN ............. 1 160-32632 PLATE/SIDE BACKING ...........2
08 390-32643 RETAINER ...................... 2 (2170 ONLY)
076588 FLS 3/8X3/4 (FLN) ............. 4 650437 CB 5/16X5/8 (LFLN.L.P) .......12
09 220-32513 PIN/ASSY (73/8 P) .............. 1 17 390-32696 STIFFENERIVEIN ................2
10 380-32348 SPRING/COMPRESSION ........ 2 (2170 ONLY)
11 220-18200 PiN/ROLL ....................... 1 650949 THMS 5/16X3/4 (N.L.P) .........6
12 082717 CHAMBER/FORMING SIDE · ..... 1 18 400-18916 WASHER ........................1
LH (2140 ONLY) 19 420-33903 EDGING ....................... AR
330-33260 CHAMBER/FORMING SIDE · ..... 1 20 045-31404 BUSHING OIUTE ................2
LH (2170 ONLY)
Printed In U.S.A. 11 906305/1 P192
MC2140/2170 - HEADER FRAME & CONDITIONER ROLLERS
906305/1 P192 12 Printed In U.S.A.
MC2140/2170· HEADER FRAME & CONDITIONER ROLLERS
Ref. Part Qty. No. No. Part Name Req.
01 330-33301 SHIELD/ASSY RT ............... 1 650687 CB 5/16X3/4 (N,L,P) ............ 5
02 290-32471 ROD/ASSY ...................... 1 03 420-30377 GROMMET/RUBBER (5/16 P) .... 1 04 220-16199 PiN ............................. 3 05 420-34448 TOOLIASSY .................... 1 06 330-33283 DEFLECTOR/ASSY .............. 2
076588 FLS 3/8X3/4 (FLN) ............. 4 07 300-31918 ROLLER/CONDITIONER
UPPER (2170 ONLY) 082723 ROLLER/CONDITIONER
UPPER (2140 ONLY) 08 300-31919 ROLLER/CONDITIONER
LOWER (2170 ONLY) 082694 ROLLER/CONDITIONER
LOWER (2140 ONLY) 09 082984 SHIELD/TRANS ASSY ........... 1
(BEFORE SN11701-2140 & SN22201-2170)
090947 SHIELD/TRANSMISSION ASSY .. 1 (AFTER SN11700-2140 & SN22200-2170)
650953 THMS 3/8X3/4 (N,L) ............ 4 10 610748 CATCH/KEEPER ................ 2 11 078580 POUCH/MANUAL ................ 1 12 068642 WASHER/SPECIAL .............. 4 13 079923 RIVET/BLlND ................... 4 14 330-33297 SHIELD/BELT ................... 1
076588 FLS 3/8X3/4 (FLN) ............. 5
......... 1
......... 1
......... 1
......... 1
Ref. Part No. No.
15 330-33284
16 17
18
19
20
21
22 23 24
097827
650834 420-34436 230-32500
082699
650495 390-32658
380-32348
083397 650490
097828
097857
082705a
420-34437 420-34447 420-34438
Qty. Part Name Req.
SHOE/ROCK LT .................1 (BEFORE SN12001-2140 & SN22801-2170) SHOE/ROCK LT .................1 (AFTER SN12000-2140 & SN22800-2170)
CB 1/2X1-1/2 (N,L,1P) ..........3 PLUG/HOLE .....................2 BAR/PUSH ASSY ................1 (2170 ONLY) BAR/PUSH ASSY ................1 (2140 ONLY)
CS 1/2X1-1/4 (N,L) .............4 LATCH ..........................2 (2) 5/16 P SPRING/COMPRESSiON .........2 (2) 5/16 LN SHIELD/END SICKLE ............ 1
CS 3/8X1 (NILN,P) .............. 1 FRAME/MAIN ASSY (2140) .......1 (AFTER SN12001-2140) FRAME/MAIN ASSY (2170) .......1 (AFTER SN22800-2170) FRAME/MAIN ASSY (2140) .......1 (BEFORE SN 12001-2140) PAD/END PANEL ................2 EDGING .........................1 PADITRANSMISSION ............1
a) For replacement order 097828
Printed In U.S.A. 13 906305/1 P192
MC2140/2170 - WHEEL ASSEMBLY
Ref. No.
01 02 03 04
05
06
Part No.
079716 042163 042162 080795
091870
550041
072624
Qty. Ref. Part Name Req. No.
SEAL/GREASE . ... . .... . ... . . ... 1 07 CONE/BEARING ..... . .. ... .. . .. 2 08 CUP/BEARING INNER . .. ..... . .. 2 09 HUB/WHEEL ASSY (INCL 3,7) ... 2 10 (BEFORE SN 12001-2140 & SN22801-2170) 11 HUB ASSY (INCL 3,7,13,14) ..... 2 12 (AFTE R SN 12000-2140 13 & SN22800-2170) BOLT/WHEEL ............ . .... . 12 (BEFORE SN 12001 -2140 14 & SN22801-2170) WHEEL/DC 14 X 8 KB . ... .. . .... 2
5
Part Qty. No. Part Name Req.
520054 CUP/BEARING OUTER .. ..... . ... 2 520201 BEARING/CONE . ....... . . . . .. .. . 2 066717 WASHER/SPiNDLE . ....... . .... .2 653102 NUT/SLOTTED 7/8 NF . ....... . .. 2
655010 PIN/COTTER 1/8X1 -1/2 .. .... . . . 2 076586 CAP/GREASE . .. .. ..... . ........2 045582 VALVE/TIRE .. . . . .. .. . ... . .. ... .. 2 046000 BOLT/WHEEL .. . ...... . .... . . ..12
(AFTER SN12000-2140 & SN22800-2170)
046001 NUT/WHEEL . . ....... . .. . ... . . ..12 (AFTER SN12000-2140 & SN22800-2170)
906305/1 P192 14 Printed In U.S.A.
MC2140/2170 - PITMAN DRIVE
21
lower Roll Shaft
Ref. Part No. No. 01 010-32392
650786 02 370-32142
650338 03 004942 04 045-31395
650202 05 260-32252 06 020-32214 07 045-31417
651119 6H 154
400-20466 08 240-32034
570014 09 180-10909 10 360-21711
650494 11 220-21516
655006 12 126342
13 250-19364 14 290-32468 15 040-33350
650494 16 360-32512 17 380-25728 18 260-32253 i 9 260-25753
a) For breakdown, see page titled Gearbox b) For replacement order 090086 and 510233 c) For replacement order 124472 d) For replacement order 126341
Qty. Part Name Req.
FLANGE/BEARING .............. 1 CB 3/8Xl-l/4 (N,L,P) ........... 3
SPROCKET/lIT ................. l SHSS 1/4-20 ................... 2
KEY 1/4X1/4Xl .................. 1 BUSHING (W/SCREWS) ......... 1 SHSS-SL 5/16X5/l6 (L) ......... 3
SHEAVE ........................ 1 V-BELT/B SECTION ............. 1 BUSHING/PiVOT ................ 1
CS 3/4X10 (N,L,P) ............. 1 WASHER/SPECIAL ............. 2
WASHER/SPECiAL .............. 1 ARM/IDLER ASSY ............... 1
FITTING/GREASE .............. 1 KEY/sa. HARD .................. 1 SHIM ........................... 4
CS 1I2X1 (L) ................... 4 PiN .......................... '" 1
PIN/COTTER 1/8Xl ............ 1 FLAP ........................... 1 (AFTER SN24000-2170) YOKE/ADJUSTING .............. 1 ROD/ADJUSTING (1/2N) ......... 1 ANCHOR/ASSY ................. 1
CS 1/2X1 (L,P) ................ 2 SPACER (2 1/2N,l P) ....... 1 SPRING/COMPRESSION ........ 1 PULLEY/PITMAN ................ 1 IDLER/FLAT BELT ............... 1
Ref. No.
650886 20 045-31396 21 360-32507 22 360-32508c
23 360-32509c 650491
24 090086 a
250-32571 ab
25 520159 26 126341
090949d
656093 27 350-32475 28 124472
Qty. Part Name Req.
CS 1/2X6-1/2 (N,L,P) ........... 1 ELEMENT/LOCKING SET ...... " .2 SPACER/LONG .................. 1 SPACER/SHORT (BEFORE ....... 1 SN12301-2140 & SN23501-2170) FLANGE ........................1
CS 3/8Xl-1/4 ...................6 (BEFORE SN12301-2140
& SN23501-2170) GEARBOX/ASSM ................1 (AFTER SN11700-2140 & SN22200-2170) GEARBOX/ASSM ................ 1 (BEFORE SNl1701-2140 & SN22201-2170) COLLAR/BEARI N G ...............1 SHIELD/DRIVELINE (INCL 12) .... 1 (AFTER SN24000-2170) SHIELD/SAFETy ................. 1 (BEFORE SN24001-2170 & AFTER SN11700-2140 & SN22200-2170)
CS M8X16 (P) ................. .4 RING/LOCKING ..................1 FLANGE (AFTER SN12300-2l40 .. 1 & SN23500-2170)
PrInted In U.S.A. 15 906305/1 P192
MC2140/2170 - GEARBOX
(AFTER SN11700-2140 &SN22200-2170)
Ref. Part No. No.
090086
01 090087 02 090088 03 089133 04 090089 05 090090 06 084595 07 090091 08 090092 09 090093
906305/1 P192
12
10
Qty. Part Name Req.
GEARBOX/ASSY .. . .. . ...... . .. . 1 CONSISTS OF: HOUSiNG/GEARBOX . .... . ...... 1 BEARING . ....... . ........ .. .. .. 4 RING/SNAP ... . . . . . . .. ... . ...... 3 SPACER ... . .... . . ... . .... . . . ... 1 SEAL/OIL . . ... . ... . ............. 2 SHIM . ...... .. .. . .. . .... . .. . . .. . 2 SHAFT/INPUT ... . ... .. .... . . . ... 1 RING/RETAINING .... .... ...... . 1 LOCKNUT ... . .... . . . . .. . . . . . ... 1
17--l1I
16
15
9-@ 19--@
Ref. No.
Part No.
10 12 13 14 15 16 17 18 19 20 21
090094 090096 090097 090098 090099 090493 090494 089131 090495 090496 089134
16
Qty. Part Name Req.
SHAFT/OUTPUT ........ . .. .. ... . 1 PINION ....... ........... .. .. .. . 1 PLUG ... .. ......................2 DIPSTICK/OIL .. .. ...... .... ..... 1 GASKET/GEARBOX COVER . .. .. . 1 COVER/GEARBOX ... . . . . . .. .. ... 1 BOLT ........ .. ........ .. ...... .4 CAP .... . . . ... .. ....... .. .... . .. 1 WASHER/SPRING . .. . ......... . . 1 GEAR . . . .. .... . ...... . .. . . ... ... 1 SHIM ....... . . . . . ...... .. . . .. . .. 2
Printed in U.S.A.
MC2140/2170 • GEARBOX
(BEFORE SN11701-2140 & SN22201-2170)
Ref. Part No. No.
250-32571
01 004146 02 044965
6007598
03 520033 04 520204 05 600324 06 320-32632 07 180-10194 08 160-32210 09 230-24034 10 230-32183 11 660033
aty. Part Name Req.
GEARBOX/ASSY . . . ... ... ....... 1 CONSISTS OF: SEAL ..... . ........... .. ........ 1 RING/SNAP ................ .. ... 4 SHIM ...... .. ............. . ....AR BEARING/CUP .. ......... ..... . . 4 BEARING/CONE . .. .. ....... .. .. 4 NUT/STAKE 1-3/8 . ... ... . ....... 1 SHAFT/OUTPUT . ... ...... . ..... 1 KEY/WOODRUFF ..... . .. .. . .. . . . 1 HOUSING .... . ........... . . . ... . 1 PLUGIVENT . . .. . ..... . .... ... . . 1 BUSHING 3/8-1/8 ....... . ....... 1 PLUG/PIPE 3/8 .................. 1
Ref. Part No. No.
12 160-32163 650485
13 210-32045 14 130-13131 15 140-32240 16 335-32129 17 140-32176 18 230-27194 19 335-32189 20 320-32577 21 180-32134 22 655537
a) Not illustrated
Qty. Part Name Req.
COVER ... ... ....... . ....... ... . 1 CS 5/16X5/8 .. .. .... ........... .4
NUT/STAKE 1-1/4 . .. ............ . 1 GASKET ... ....... . . .. . ... . . .... 1 GEAR/PINION 14 TOOTH ........1 CAP/SEAL . . . ............... ... .. 1 GEAR/BEVEL 21 TOOTH ... . . . ... 1 PLUG/DRAIN ....................1 SEAL/INPUT SHAFT ........ .. ... 1 SHAFT/INPUT .... . ...... . ....... 1 KEY/SQUARE ........ .... . . ..... 1 KEY/WDRF 5/16X1-1/4 ..... ...... 1
Printed In U.S.A. 17 906305/1 P192
MC2140/2170 - CONDITIONER (LEFT SIDE)
Ref. Part No. No . .
01 010-32322 650495
02 089871 03 077601
650811 04 089872 05 240-32032 06 124466
045-31361
650765
Qty. Part Name Req.
FLANGETTE .... . ............... 2 CS 1/2X1-1/4 (L) .......... . .... 4
BEARING/BALL ................. 1 RETAINER/BEARING ........ . .. . 2
CB 1/2Xl (LN) ............. . ... 4 BEARING/BALL ... ... ..... . . .... 1 ARM/ROLL ASSY LT .... ...... .. 1 BUSH!NG ....................... 1 (AFTER SN 11700-2140 & 22201-2170) BUSHING .................. . .... 1 (BEFORE 11701-2140 & 22200-2170)
CB 5/8X2-3/4 (LN,L) ............ 1
Ref. Part No. No.
07 480-27676 08 380-32354 09 385-27865
310-32513
10 360-32503 11 360-32504
650533 12 520195 13 089867 14 044090 15 056640 16 125155
aty. Part Name Req.
WASHER/SPECIAL .............. 1 SPRING/ROLL ASSY (INCL 9) .... 1 PLUG/SPRING ................... 1
CS 3/4X6 (N,P) .. .. ....... .. . . .. 1
SHIM 7/64" ..................... .4 SHIM 1/16" ............... .. .....3
CS 3/8X1-1/2 (N,L) ... .. .. ...... 1 COLLAR/BEARING . . ............. 1 COLLAR/BEARING .. . ............ 1 SPACER ...................... AR RING/RETAINING . ... . ........ .. . 1 SHIM 1/32 '" .. . .. . .. ... ....... AR
906305/1 P192 18 Printed In U.S.A.
MC2140/2170 .. CONDITIONER (RIGHT SIDE)
Ref. No.
01 160-32646 650488 650790
02 089872 03 077601
650811 650494
04 410-32402. 651142
05 089262 ad
370-32100ce 06 400-32447a
650972 07 180-21917a 08 090760
500178 c 09 087362
370-32112c 650213
10 180-13696 11 360-32503 12 360-32504
650533 13 124195
0907061) 240-32033c
Qty. Part Name Req.
WEB ............................ i CS 3/8X3/4 (LN) ............... 3 CB 3/8X3/4 (LN) ............... 1
BEARING/BALL ................. 2 RETAINER/BEARING ............ 4
CB 1/2X1 ...................... 4 CS 1/2X1 (SLN) ................ 4
HUB/REEL DRiVE ............... 1 SHSS 3/8X5/8 ................. 2
SPROCKET/24T ................. 1 (AFTER SN11700-2140 & SN22200-2170) SPROCKET/20T ................. 1 WASHER/CLAMP ................ 1
CS 7/16X1-3/4 GR8 (L) ......... 4 KEY/GIS ........................ 1 CHAIN/ROLLER #60X82 ......... 1 (AFTER SN11700-2140 & SN22200-2170) CHAIN/ROLLER #60X78 ......... 1
SPROCKET/24T ................. 1 (AFTER SN11700-2140 & SN22200-2170) SPROCKET/ASSY ............... 1
SHSS 3/8X3/S ................. 2 KEY ............................ 1 SHIM 7/64" ..................... 4 SHIM 1116" ..................... 3
CS 3/8X1-1/2 (N,L) ............. 1 ARM/ROLL ASSY RT ............ 1 (AFTER SN 11700-2140 & SN222002170, BEFORE SN12301-2140 & SN23501-2170) ARM/ROLL ASSY RT ............ 1 ARM/ROLL ASSY RH ............ 1
Ret Part Qty. No. No. Part Name Req.
14 380-32354 SPRING/ROLL ASSY (3/4N,P) .... 1 15 385-27865 PLUG/SPRING ...................1 16 310-32515 SCREW/SPECIAL ........ , ....... 1 17 093509 SPROCKETIIDLER ASSY .........2
650765 CB 5/8X2-3/4 (2N,L,P,2 3/4P) ... 1 18 124466 BUSHING ....................... 1
(AFTER SN 11 700-2140 & SN22200-2170)
045-31361 c BUSHING .......................1 650765 CB 5/8X2-3/4 (LN,L) ............2
19 480-27676 WASHERISPECIAL ..............2 20 124190 ADJUSTMENT/ASSY (4 1/2N) .... 1
(AFTER SN 12300-2140 & SN23500-2170)
030-31906a BOLT/ADJUST ASSY (2 3/8N) .... 1 650756 CB 5/8X2-3/4 (N,L,P,7/SP) ...... 1
21 520195 COLLAR/LOCK ..................2 22 115726 SPROCKET/24T .................1
126259f SPROCKET/20T .................1 23 115727 ELEMENT/LOCKING 1-3/4 SHAFT 1
(AFTER SN12300-2140 & SN23500-2170)
24 044090 SPACER ...................... AR (AFTER SN12300-2140 & SN23500-2170)
25 125155 SHIM 1/32 ..................... AR
a) Before SN12301-2140 & SN23501-2170. b) For replacement order 124195 & 124190. c) Before SN11701-2140 & SN22201-2170. d) For replacement order 115726 & 115727. e) For replacement order 126259 & 115727. f) Never used in production. Service Part Only.
906305/1 P19219Printed In U.S.A.
MC2140/2170 - REEL VARIABLE DRIVE
Ref. Part O1y. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
01 260-32265a PULLEY/HALF (OLD STYLE) ..... 2 07 520085 COLLAR/LOCK ..................2 098032 PULLEY/HALF (NEW STYLE) .... 2 08 520065 BEARING .......................2
02 360-32505 SHIM 7/64" ..................... 5 09 360-32506 SPACER/IDLER (5/8N.P.7/8P) .... 1 064422 FLS 3/8X1-1/2 ................. 4 10 370-18061 SPROCKETIIDLER ...............1
03 370-32113 SPROCKET/ASSY 50T ........... 1 651104 CB 5/8X3-1/4 ...................1 04 320-32578 JACKSHAFT .................... 1 11 500076 CHAIN/ROLLER #50X58 ..........1 05 220-19812
650553 PIN ............................. 1
PIN/COTTER 1/8X3/4(5/16P) ... 1 a) For replacement order 098032
06 027003 FLANGETTE .................... 4 650704 CB 3/8X1 (N.L) ................. 6
906305/1 P192 20 Printed In U.S.A.
MC2140/2170 - PITMAN & WOBBLE ARM DRIVE
Ref. Part No. No.
01 260-32253 05 520093 06 098235
240-31990
07 390-16339 651113
390-32585 650585
08 200-32366 651239
210-19530
570014 09 240-32035 10 520205
Printed In U.S.A.
Qty. Part Name Req.
FLYWHEELIPITMAN ............. 1 COLLAR ........................ 1 ARM/PITMAN ASSY ............. 1 (AFTER SN12000-2140 & SN22800-2170) ARM/PITMAN ASSY ............. 1 (BEFORE SN12001-2140 & SN22801-2170) CLAMP/PITMAN ................. 1
CS 7/16Xl-3/4 (N) ............. 1 (AFTER SN12000-2140 & SN22800-2170) CLAMP/PITMAN ................. 1
CS 1/2X2 (N) .................. 1 (BEFORE SN 12001-2140 & SN22801-2170) SOCKET/ASSY (LONG) .......... 1
CS 1/2X2-1/2 GR8 (P) .......... 2 NUT/LOCK FLANGE ............ 2
FITTING/GREASE .............. 1 ARM/WOBBLE ASSY ............ 1 BEARING/CUP .................. 1
21
Ref. Part No. No.
11 520206 12 360-14855 13 360-32510
076589 14 030-31908
650933 655024
15 360-32511 360-32520
650644 16 200-32448
651240 210-19530
076002 17 077031 18 654006 19 098237
650491 20 400-15947
650490 21 126297
Qty. Part Name Req.
BEARING/CONE .................2 WASHER/SPECIAL ..............3 SHIM ...........................6
FLS 3/8X (FLN) .................2 BOLT/WOBBLE ARM ASSY ....... 1
NUT/SLOTTED 1" ............... 1 PIN/COTTER 3/16X2 ............ 1
SHIM 1116" ..................... .4 SHIM 1/32" ......................2
CS 1/2X3 (LN,P) ................2 SOC.KET/ASSY (SHORT) ......... 1
CS 1/2X3 GR8 ..................2 NUT/LOCK FLANGE ............2 FITTING/GREASE .............. 1
HOUSiNG/CAST ................. 1 WASHER ........................6 CLAMP ..........................3
CS 3/8Xl-1I4 (L) ...............3 WASHER ........................1
CS3/8X1 (L) ................... 1 BEARING/ASSY ................. 1
906305/1 P192
MC2140/2170 - REEL
LONG TINE BAR r-'-llll'"
~4-1/2"SHORT TINE BAR I
- -4-
I TINE BAR DETAIL
906305/1 P192 22 Printed In U.S:A.
7
MC2140/2170 .. REEL
Ref. Part No. No.
01 090938
082688
120-32773 02 520085 03 027003
650704 04 520065 05 040-33351
650527 06 390-32657
061930 07 260-32251
650855 08 180-10909 09 020-32215 10 380-14677 11 030-31888
12 048182 13 360-32513 14 240-32036
650644 650821
15 200-32509 16 030-13498
17 120-32774 650527 650786 650860
18 390-32703 19 076588 20 210-19533 21 082687
110-32416 22 310-16296 23 076159 24 400-10627
Qty. Part Name Req.
REELlWLDMT (2140 ONLY) ...... 1 (AFTER SNl1700-2140) REELlWLDMT (2140 ONLY) ...... 1 (BEFORE SNl1701-2140) REELlWLDMT (2170 ONLY) ...... 1 COLLAR/LOCK .................. 2 FLANGETTE .................... 4
CB 3/8Xl (N.L) ................. 3 BEARING ....................... 2 MOUNT/BEARING RIGHT ........ 1
CB 1/2X1-1I4 (N.L,P) ........... 3 STRAP/ADJUSTING ............. 1
CS 1/2X4 (N,L) ................. 1 PULLEY ........................ 1 SQHSS 1/2X1 (IN) ............. 2
KEY/Sa. HARD .................. 1 V-BELT/C SECTION ............. 1 SPRING/EXTENSiON ............ 1 BOLT/EYE ...................... 1 (1) 3/8 P,2N IDLER/FLAT BELT ............... 1 SPACER ................. , ...... 1 ARMIIDLER WLDMT ............. 1
CS 1/2X3 ...................... 1 CS 5/8X1 (L.P) ................. 1
PIVOT/WLDMT .................. 1 ROD/END ....................... 1 (2) 3/8 L, P (1) 3/8 N,NF-N CAM/ASSY ...................... 1
CB 1/2X1-1/4 (N,L,P) ........... 3 CB 3/8X1-1/4 .................. 2 CB 3/8X1-3/4 (3P) .............. 1
STRAP/REEL BAT MOUNT ......AR FLS 3/8X3/4 (FLN) .............AR FLN 3/8 ........................ 24 BAT/REEL (21400NLY) ......... 4 BAT/REEL (2170 ONLY) ......... 4 CS 5/8X2-1/4 (N,L) .............. 4 BEARING ....................... 4 WASHER/SPECIAL ............. 20
Ref. Part No. No.
25 090941
082682
090796
290-32470
651162 090939
082685
090770
290-32469
26
650545
160-32707
160-32361
27 010-32388
010-32301
28 29 30 31 32
650977 054031
210-31017 110-32354 220-32566
Qty. Part Name Req.
BAR/TINE ASSY LONG ...........2 (2140 ONLY) (AFTER SN11700-2140) BAR/TINE WLDMT LONG .........2 (2140 ONLY) (BEFORE SN11701-2140) BAR/TINE ASSY LONG ...........2 (2170 ONLY) (AFTER SN22200-2170) BAR/TINE WLDMT LONG .........2 (2170 ONLY) (BEFORE SN22201-2170)
PIN/COTTER 5/16X2 ........... .4 BAR/TINE ASSY SHORT .........2 (2140 ONLY) (AFTER SN11700-2140) BAR/TINE WLDMT SHORT .......2 (2140 ONLY) (BEFORE SN11701-2140) BAR/TINE ASSY SHORT .........2 (21700NLY) (AFTER SN22200-2170) BARITINE WLDMT SHORT .......2 (21700NLY) (BEFORE SN22201-2170)
CS 5/16X1-1/4 ...............•.24 (FLN.L,12P) HOUSiNG/BEARING ............12 (AFTER SN 11700-2140 & SN22200-2170) HOUSiNG/BEARING ............12 (BEFORE SN11701-2140 & SN22201-2170) BEARING/PLASTIC .............12 (AFTER SNl1700-2140 & SN22200-2170) BEARING/PLASTiC .............12 (BEFORE SN11701-2140 & SN22201-2170) CS 5/16X2-1/4 GR8 (P) ........ AR CLIP/TINE ..................... AR NUT/SPECiAL ...... , .......... AR TINE/DOUBLE ................. AR PIN/TINE BEARING .............12 (AFTER SN11700-2140 & SN22200-2170)
Prj nted In U.S.A. 23 906305/1 P192
MC2140- SICKLE & GUARDS
REGULAR GUARDS STUB GUARDS
906305/1 P192 24 Printed In U.S.A.
MC2140 - SICKLE &GUARDS
Ref. Part No. No.
01 082724 03 110-32342
650495 650527 650791 650834
04 0913890
110-323360
05 110-32323 06 360-32359 07 110-32330
650453 650494 650495 650791 650834
030-31887
097995 08 110-32409 09 110-32334 10 110-32341 11 110-10655 12 360-32404 13 110-32349 14 090580
082679
090655
088739
15 H7547Aa 340-32015b
060635 m
050056n
16 340-16454c 340-16455d
071390e 071393,
17 110-32316 18 390-16339
651113
Qty. Part Name Req.
GUARD/SINGLE RT ............. 1 GUARD/SICKLE ................ 13
CS 1/2X1-1/4 (N) ..............AR CS 1/2X1-1/4 (N) ..............AR CS 1/2X1-3/4 (N) ............... 3 CS 1/2X1-1/2 (N) ..............AR
CLIP/HOLD-DOWN .... 0 o .. 000 .. 0 6 (AFTER SN11700) CLIP/HOLD-DOWN 00 ... 0... 0.0006 (BEFORE SN 11701) CLiP/HOLD-DOWN/HIGH ARCH .. 1 SHIM 1/8 ....................... 1 GUARD/STUB ................. 013
CS 1/2X1-1/2 (N) ... 0.... 0.0 .. 001 CS 1/2X1 (N) .................. 1 CS 1/2X1-1/4 (N) 0............ 001 CB 1/2X1-3/4 (N) ..... ~ ......... 4 C B 1 /2X 1-1/2 (N) 10 • 0 ••••••••••••
CB 1/2X2-1/2 (N,LN) ......... 019
C B 1/2X2-3/4 ... 0 0 .. 0 . 0 0 0 ...... 3 GUARD/SICKLE .......... 0 0 0 0 . 0 0 1 HOLD-DOWN/STUB GUARD 0000 11 HOLD-DOWN/CLIP 00 .. 0........ 0 2 SHIM 1/32 .....................AR SHIM 3/16 ..................... 13 CLIP/ADJUSTMENT. 0 0 0 0 0.00 ... 22 SICKLE W/O HEAD (BOLTON) 000 1 (UNDER SERRATED) (AFTE R SN 11700) SICKLE W/O HEAD 0............. 1 (UNDER SERRATED) (BEFORE SN 11701) SICKLE W/O HEAD (BOLT ON) .00 1 (TOP SERRATED) (AFTER SN11700) SICKLE W/O HEAD. o... 00.0 .... 0 1 (TOP SERRATED) (BEFORE SN11701) SECTION/UNO. SERRATED 0.. 0 .AR SECTION/TOP SERRATED .. 0..AR SECTION/UNDER SERRATED ..AR (CHROMED) SECTION/OVER SERRATED .. 0oAR (CHROMED) SECTION/HALF RH 0.... 0 0 0 0 0 0 ... 1 SECTION/HALF LH '" ..... 0 0 . 0 0 . 1
RIVET ...................... o.49 RIVET ... 0 0 ........ 0....... 0 0 . 11
(BEFORE SN11701) HEAD/SICKLE ............... 00.1 CLAMP ......................... 1
CS 7/16X1-3/4 (N) ............. 1
Ref. Part Qty. No. No. Part Name Req.
19 083729 SICKLE W/HEAD .. 000 .. 0.0 ...... 1 (TOP SERRATED) (BEFORE SN 11701)
082827 SICKLE W/HEAD . 0 ......... o.... 1 (UNDER SERRATED) (BEFORE SN 11701)
20 091382g SECTION/END RT ...............1 (UNDER SERRATED)
091572h SECTION/END RT ........ 0.. 0...1 (TOP SERRATED) (AFTER SN 11700)
21 091383j SECTION/END LT ................ 1 (UNDER SERRATED)
091571j SECTION/END LT ................ 1 (TOP SERRATED) (AFTER SN11700)
091384k SCREW/#12 SERR 7/8 GR8(LN) AR 091385, SCREW/#12 SERR 5/8 GR8(LN) AR
(AFTER SN 11700) 22 110-32405 GUARD/SPECIAL DRIVE END .... 1
a) For box of (25) Under Serrated Sections, order 083486.
b) For box of (25) Top Serrated Sections, order 083597.
c) For box of (25) Right Half Sections, order 083598.
d) For box of (25) Left Half Sections, order 083599.
e) For 1 Ib box of Rivets, order 640007.
f) For 1 Ib box of Rivets, order 640010. g) For box of (10) Right Half Sections, order
091570.
h) For box of (10) Right Half Sections, order 091126.
i) For box of (10) Left Half Sections, order 091569.
j) For box of (10) Left Half Sections, order 091125.
k) For box of (25) Screws W/Nuts, order 090052. I) For box of (50) Screws W/Nuts, order 090095.
m) For box of (25) Chrome Under Serrated Sections, order 060737.
n) For box of (25) Chrome Over Serrated Sections, order 600190.
0) For replacement order 126320.
CONVERSION KITS:
For Conversion Kit to install Regular Guards on 2140, order 088741. For Conversion Kit to install Stub Guards on 2140, order 088742.
Printed In U.S.A. 25 906305/1 P192
MC2170 • SICKLE & GUARDS
REGULAR GUARDS STUB GUARDS
906305/1 P192 26 Printed In U.S.A.
MC2170 - SICKLE & GUARDS
Ref. Part No. No.
01 110-32405 02 110-32342
650495 650527 650791 650834
03 126320
091389q
110-32336q
04 110-32323 05 360-32359 06 110-32410 07 110-32330
650453 650791 650834
030-31887 097995
08 110-32409 09 110-32334 10 110-32341 11 110-10655 12 360-32404 13 110-32349 14 090620
340-32063
090692
082980
15 H7547Aa 124737p
340-32015b
060635m
050056n
16 340-16454c 340-16455d
071390e 071393f
1 7 110-32316 18 390-16339
651113
Qty. Part Name Req.
GUARD/SPECIAL DRIVE END .... 1 GUARD/SICKLE HVY DUTy ..... 18
CS 1/2X1-1/4 (N) ............... 2 CS 1/2X1-1/4 (N) .............. 31 CS 1/2X1-3/4 (N) ............... 2 CS 1/2X1-1/2 (N) ............... 3
CLiP/HOLDDOWN ............... 8 (AFTER SN24000) CLiP/HOLDDOWN ............... 8 (BEFORE SN24001 &
AFTER SN22200) CLiP/HOLD-DOWN .............. 8 (BEFORE SN22201) CLIP/HOLD-DOWN .............. 1 SHIM 118 ......................AR GUARD/SPECIAL RT ............ 1 GUARD/STUB .................. 17
CS 1/2XH/2 (N) ............... 2 CB 1/2X1-3/4 (N) ............... 4 CB 1/2X1-1/2 (N) ............... 2 CB 1/2X2-1/2 (N,LN) .......... 27 CB 1/2X2-3/4 .................. 3
GUARD/SICKLE ................. 1 HOLD-DOWN/STUB GUARD .... 16 HOLD-DOWN/CLlP .............. 2 SHIM 1/32 .....................AR SHIM 3/16 ..................... 17 CLiP/ADJUSTMENT ............ 32 SICKLE W/O HEAD (BOLT ON) ... 1 (UNDER SERRATED) (AFTER SN22200) SICKLE W/O HEAD .............. 1 (UNDER SERRATED) (BEFORE SN22201) SICKLE W/O HEAD (BOLT ON) ... 1 (TOP SERRATED) (AFTER SN22200) SICKLE W/O HEAD .............. 1 (TOP SERRATED) (BEFORE SN22201) SECTION/UNDER SERRATED ..AR SECTION/TOP SERRATED .....AR (AFTER SN24000) SECTION/TOP SERRATED .....AR (BEFORE SN24001) SECTION/UNDER SERRATED ..AR (CHROMED) SECTION/OVER SERRATED ....AR (CHROMED) SECTION/HALF RH .............. 1 SECTION/HALF LH .............. 1 RiVET ......................... 67 RIVET ......................... 11 HEAD/SICKLE .................. 1 CLAMP ......................... 1
CS 7/16X1-3/4 (N) ............. 1
Ref. Part Qty. No. No. Part Name Req.
19 246-261880 SICKLE W/HEAD ................ 1 (UNDER SERRATED) (BEFORE SN22201)
0837300 SICKLE W/HEAD ................ 1 (TOP SERRATED) (BEFORE SN22201)
20 091382g SECTION/END RT ............... 1 (UNDER SERRATED)
091572h SECTION/END RT ............... 1 (TOP SERRATED) (AFTER SN22200)
21 0913831 SECTION/END LT ................ 1 (UNDER SERRATED)
091571J SECTION/END LT ................1 (TOP SERRATED) (AFTER SN22200)
091384k SCREW/#12 SERR 7/8 GR8(LN) AR 0913851 SCREW/#12 SERR 5/8 GR8(LN) AR
(AFTER SN22200)
a) For box of (25) Under Serrated Sections, order 083486.
b) For box of (25) Top Serrated Sections, order 083597.
c) For box of (25) Right Half Sections, Nder 083598.
d) For box of (25) Left Half Sections, order 083599.
e) For 1 Ib box of Rivets, order 640007. f) For 1 Ib box of Rivets, order 640010. g) For box of (10) Right Half Sections, order
091570. h) For box of (10) Right Half Sections, order
091126. I) For box of (10) Left Half Sections, order
091569. j) For box of (10) Left Half Sections, order
091125. k) For box of (25) Screws W/Nuts, order 090052. I) For box of (50) Screws W/Nuts, order 090095. m) For box of (25) 'Chrome Under Serrated
Sections, order 060737. n) For box of (25) Chrome Over Serrated
Sections, order 600190. 0) Not available as a Service Part. Order Sickle
and Head seperately. p) For box of (25) Top Serrated Sections, order
126300. q) For replacement order 126320.
CONVERSION KITS:
For Conversion Kit to install Regular Guards on 2170, order 088743. For Conversion Kit to install Stub Guards on 2170, order 190-32585.
Printed In U.S.A. 27 906305/1 P192
MC2140/2170 - PTO TOWER
(AFTER SN11700-2140 & SN22200-2170)
Ref. Part No. No.
01 126339 061685
03 520093 04 520092 05 124484
650704 06 094154
091372
07 094134a 651240
091378 650858
906305/1 P192
Qty. Part Name Req.
SHIELDIDRIVELINE (INCL 18) . . . 1 CB 3/8Xl-3/4 (LN,2P) ... . . . .... 3
LOCK/COLLAR . ... . ......... . . .. 1 BEARING/BALL . . . .... .. .... . ... 1 FLANGETTE ......... . .......... 2
CB 3/8Xl (N,L) . . .. . .. . .. .. . . . .. 3 DRIVE/UNIVESAL ASSMD . ..... . 1 (AFTER SN12300-2140 & SN23501-2170) JOINT/UNIV W/SHAFT .. . ... . ... . 1 (BEFORE SN12300-2140 & SN23501-2170) JOINT .. .. ... . ............. . . . .. 1
CS 1/2X3 GR8 (N,L) .... . . .. . . . . 2 (AFTER SN12300-2140 & SN23501 -2170) JOINT/SPLINED . . ...... . .... . .. . 1
CS 1/2Xl-l/2 NF (L) ...... .. . . .. 1 (BEFORE SN 12300-2140 & SN23501-2170)
28
a) Contained in Kit 094137
Printed In U.S.A.
Ref. No.
Part No.
08 09 10 11 12 13 14 15 16 17
091377 510114 091373 510100 510223 091374 084242 091376 092015 094155
0913 75
18 126342
Qty. Part Name Req.
HOUSING/CENTER ASSY .. ...... 1 KIT/CENTER CROSS .. .. .... ... .. 2 YOKE & SHAFT ..... .. ........ . .. 1 RETAINER/BEARING ... . .. .. .. . . 4 BEARING/NyLON ... . ... . ....... . 1 SHIELD/OUTER .. .. .... ......... 1 BEARING/CENTRALIZER .. .. . .... 1 SHIELD/TUBE END .. ........ .... 1 BEARING/NyLON . ...... .. ..... . . 1 STUB/PLUG W/TUBE .... ........ 1 (AFTER SN12300-2140 & SN23501-2170) STUB/PLUG W/TUBE ...... ...... 1 (BEFORE SN 12300-2140 & SN23501-2170) FLAP .. . .... ..... .. . . . ... . . . . . .. . 1
MC2140/2170 - PTO TOWER WITH 092009 CV JOINT KIT
(BEFORE SN11701-2140 &SN22201-2170)
Ref. No.
01
02
03 04 06 07
oa 09
Part No.
126339 061685
124484 650704
520093 520092
092012 092013
650858 091377 510114
2 11
1bbb
aty. Part Name Req.
SHIELD/DRIVELINE (INCL 19) ... 1 CB 3/aX1-3/4 (LN,2P,N,L) ...... 3
FLANGETTE .................... 2 CB 3/aX1 (N,L) ................. 3
LOCK/COLLAR .................. 1 BEARING/BALL ................. 1
JOINT/UNIV W/SHAFT .......... 1 YOKE/KEYED ................... 1
CS 1/2XH/2 (L) ............... 1 HOUSING/CENTER ASSY ........ 1 KIT/CENTER CROSS ............ 2
Ref. Part No. No.
10 091373 11 510100 12 510023 13 091374 14 084242 15 091376 16 092015 17 091375 18 oa6924 19 126342
Qty. Part Name Req.
YOKE & SHAFT .................. 1 RETAINER/BEARING ........... -.4 BEARING/NYLON ................1 SHIELD/OUTER ................. 1 BEARING/CENTRALIZER ......... 1 SHIELD/TUBE END .............. 1 BEARING/NyLON ................1 STUB/PLUG W/TUBE ............ 1 YOKE/SPRING LOCK ASSY ...... 1 FLAP ............................1
Printed In U.S.A. 29 90630511 P192
MC2140/2170 • PTO TOWER
(BEFORE SN11701·2140 & SN22201.2170)
7
Qty.Qty. Ref. PartRef. Part Part Name Req.No. No. Part Name Req. No. No.
01 330 -33302 SHIELD/PTO ........... ......... 1 10 047524 BEARING/RETAINER ........... .4 650954 THMS 3/8X1 (N,L) .............. 2 11 047523 BEARING/NYLON ................2
02 040-33368 TOWER/PTO WLDMT ..... ....... 1 12 330-33300 PTOIINNER GUARD .............1
650453 CS 1/2X1-1/2 (N,L) ............. 2 13 510202 BEARINGINYLON ............... .1
03 520090 LOCK/COLLAR . .... . . ........... 1 14 330-33299 PTO/OUTER GUARD ......... .. .. 1
04 010-31091 a BEARING/FLANGED ............. 1 15 320-32580 PTO/MALE SHAFT ASSY . .. ...... 1
650786 CB 3/8X1-1/4 (N,L) .......... ... 3 655537 KEY/WDRF 5/16X1-1/4 ..........1
06 250-32511 PTO/FEMALE HALF ASSY ...... . 1 16 250-32510 PTO/MALE HALF ASSY ...... .. .. 1
07 250-32512 YOKE .......................... 1 17 655537 KEY/WDRF 5/16X1-1/4 ........... 1
650585 CS 1/2X2 (LN) ................. 1 a) For Bearing only, order 010-10042 08 045327 KIT/CENTER CROSS ............ 1 09 320-32579 PTO/FEMALE TUBE ASSY ....... 1
906305/1 P192 30 Printed In U.S.A.
MC2140/2170 - TELESCOPING DRIVE (TOWER TO TRACTOR)
(AFTER SN11700-2140 & SN22200-2170)
Tower End
Ref. Part No. No.
01 094157
091379
02 094142 03 510114 04 320-32615 05 510100 06 510023 07 089207
Qty. Part Name Req.
JOINT/UNIV W/TUBE ............ 1 (AFTER SN12300-2140 & SN23501-2170) JOINT/UNIVERSAL W/TUBE ..... 1 (BEFORE SN 12300-2140 & SN23501-2170) YOKE/SPRING LOCK ASSY .. , ... 1 KIT/CENTER CROSS ............ 2 YOKE/TUBE ASSY .............. 1 RETAINER/BEARING ............ 4 BEARINGINYLON ............... 2 GUARDIINNER ASSY ............ 1
Ref. Part No. No.
08 089960 09 320-32616 10 089205 11 086928 12 086927 13 086926 14 350-32485 15 089286 16 086931 17 084242 18 086930
Tractor End
Qty. Part Name Req.
GUARD/OUTER .................. 1 YOKE/SHAFT ASSY .............. 1 YOKE/QUIK-LOCK ASSY .........1 BALL/STAINLESS 3/8 ............5 SPRING ............ , ............2 COLLAR ASSY ..................2 RING/RETAINING ................2 DRIVE/MALE HALF ASSY ........ 1 WASHER ........................2 CENTRALIZER .................. 1
COVER ......................... 1
Printed In U.S.A. 31 906305/1 P192
MC2140/2170 - TELESCOPING DRIVE {TOWER TO TRACTOR)
(BEFORE SN11701-2140 & SN22201-2170)
Ref. Part No. No.
01 089287 02 250-10052 03 510114 04 320-32615 05 510100 06 510023 07 089207
08 089960 09 320-32616
Qty. Part Name Req.
DRIVE/FEMALE HALF ASSY .. .. . 1 YOKE/END ...................... 1 KIT/CENTER CROSS .. ...... . ... 2 YOKE/TUBE ASSY .............. 1 RETAINER/BEARING ... . ... ... .. 4 BEARINGINYLON .. .... ..... .... 2 GUARD/INNER ASSY .. . . . ....... 1 GUARD/OUTER ....... .. ... . . ... 1 YOKE/SHAFT ASSY .......... . .. 1
Ref. No.
Part No.
10 11 12 13
089205 086928 086927 086926
14 350-32485 15 089286 16 086931 17 084242 18 086930
Tractor End
Qty. Part Name Req.
YOKE/QUIK-LOCK ASSY ... .... .. 1 BALL/STAINLESS 3/8 ............2 SPRING ................... ... ... 1 COLLAR ASSY ............... . .. 1 RING/RETAINING .... ..... .. .... . 1 DRIVE/MALE HALF ASSY . .. ..... 1 WASHER ..... .. ................. 1 CENTRALIZER . ...... . ... . . . . ... 1 COVER . .. ... ................... 1
906305/1 P192 32 Printed In U.S.A.
_________________MC2140/2170 - HITCHJACKS
071119 Hitchjack· Hammerblow
e
(~.~4~1J; llV2 t-----;
3
4
Ref. Part No. No.
071119 01 061276 02 061293 03 061294 04 061295 05 0712728
Qty. Part Name Req.
HITCHJACK-HAMMERBl.,OW ..... 1 PIN & CHAINiASSY ............. 1 TUBE/JACK-INSIDE ............. 1 TUBE/JACK-OUTSiDE ........... 1 CRANK/JACK ................... 1 KIT/JACK SERVICE ............. 1
a) Includes Tube Cap, Grease Fitting, Grommet, Thrust Bearing, Thrust Washer, Ball & Cage, Felt Spacer, Support Washer, (2) Shaft Bushings, (2) Bevel Gears & (2) Spring Pins
071119 & 088841 Hitchjacks· Wesbar
Ref. Part No. No.
071119 8
01 061276 02 077840 03 077841 04 077837 05 077838 06 077839 07 077836 08 094283
088841b
01 061276 02 081462 03 092021 04 081463 05 077838 06 077839 07 077836 08 094283
Qty. Part Name Req.
HITCHJACK-WESBAR ............ 1 CONSISTS OF
PIN & CHAIN/ASSY ..............1 TUBE/JACK-INSI DE ..............1 TUBE/JACK-OUTSIDE ...........1 CRANK/JACK & NUT ............. 1 CAP/TOP ........................1 SHAFT/CROSS .................. 1 KIT/GEAR ....................... 1 KITIINTERNAL PARTS ........... 1
HITCHJACK-WESBAR ............ 1 CONSISTS OF
PIN & CHAIN/ASSY ..............1 TUBE/JACK-INNER .............. 1 TUBE/JACK-OUTER ............. 1 CRANK/JACK & NUT ............. 1 CAP/TOP ........................ 1 SHAFT/CROSS .................. 1 KIT/GEAR .......................1 KITIINTERNAL PARTS ........... 1
a) 10· Travel (17.5 overall retracted height) b) 15" Travel (23.8 overall retracted height)
Printed In U.S.A. 33 906305/1 P192
MC2140/2170 • OPTIONS
805321 (2140) & 803564 (2170)
Mechanical Tongue Posltloners
Ref. Part Qty. No. No. Part Name Req.
01 124477 POSITIONER/ASSY MECH (2140) 1 200-32511 POSITIONER/ASSY MECH (2170) 1
02 220-32529 PIN/CYLINDER ............... . .. 2 076099 COTTER/HAIR PiN ............. 4
Ref. No.
03 04
05 06
Part No.
380-10448 090-32306
650491 650533
040644 124478
480-42010
Qty. Part Name Req.
SPRING/EXTENSION .... .. ...... 1 HANDLE ... . ...... . . ...... . .. . .. 1
CS 3/8X1-1/4 (LN) . ... . ... .... . . 1 CS 3/8X1-1/2 (LN) .... .. . .... .. . 1
CORD . . ... ..... ... .. . .. . ... . . ... 1 CLEVIS/INSIDE ASSY (2140) ... . . 1 CLEVIS WLDMNT , INSIDE (2170) .1
906305/1 P192 34 Printed In U.S.A.
MC2140/2170 - OPTIONS
803565 Hydraulic Tongue Positioner
Ref. Part Qty. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
803565b POSITIONER/HYD TONGUE ..... 1 07 170-33175 PLATE/ORIFiCE .................1 CONSISTS OF: 08 083357a CyLINDER/HyDRAULIC ..........1
01 170-33762 HOSE/ASSY .................... 2 09 040-33352 LOCK/CYLINDER ................1 02 390-32661 CLIP ........................... 1 10 066452 PiN/LOCK .......................1 03 170-33767 LlNE/HYD ASSY ................ 2 11 060629 PiN/LOCK .......................2 04 390-32660 CLIP/HOSE ... " ................ 5 12 060471 PIN/KLIK ........................2 05 06
170-32999 580116
HOSE/HYDRAULIC .............. 2 UNION/90 SWIVEL ADAPTER .... 2
a) b)
ForSeaIKn.o~er084159
For Replacement order 804861
Printed In U.S.A. 35 906305/1 P192
MC2140/2170 - OPTIONS
804861 Hydraulic Tongue Positioner
Ref. Part Oty. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
804861 POSITIONER/HYD TONGUE .. . . . 1 06 040-33352 LOCK/CyLINDER . . ............ . . 1 CONSISTS OF: 07 066452 PIN/LOCK . . . .. . .. . .... ... ... . . . . 1
01 097597 HOSE/ASSY ... ... . .. . . . .. .. . . .. 2 08 097918 PiN/CyLINDER .. .. . ... . . ... .. ...2 02 097860 CLAMP/HOSE DOUBLE .... . . .. . . 7 09 076099 COTTER/HAIR PIN ...... . . . .. . ...4 03 04 05
580116 170-33175
083357a
UNION/90 SWIVEL ADAPTER .. .. 2 PLATE/ORIFICE . .. ... ... .. . . . . . . 1 CYLINDER/HYDRAULlC . .. . . . .. . 1
a)
b)
For Seal Kit, order 084159 For Replacement order 066452
906305/1 P192 36 Printed In U.S.A.
MC2140/2170 - OPTIONS
803587 Center Skid Shoes
(2170 Before SN22801-2170) 804681
Center Skid Shoe (2140 & 2170 After SN22800-2170)
7
S I
803586 Cutter Bar Wear Plate
(2170 Before SN22801-2170) 804892
(2140 After SN12000-2140) 804891
(2170 After SN22800-2170)
Ref. Part Qty. Ref. Part Qty. No. No. Part Name Req. No. No. Part Name Req.
01 220-32528 PIN ............................. 1 07 330-33303 PLATE/WEAR ASSV .............1
02 076099 COTTER/HAIR PiN .............. 1 650791 CB 1/2X1-3/4 .................. .4
03 330-33296a SHOE/SKID ASSV ............... 1 (BEFORE SN22801-2170) 04 390-32656b CLIP/SKID SHOE ................ 3 330-33424 PLATE/WEAR ASSY .............1
05 390-32659b CLIP/STUB GUARD ............. 3 650791 CB 1I2X1-3/4 ...................2 06 360-32514 SPACER/STUB GUARD .......... 1 650834 CB 1/2X1-1/2 ...................2
(AFTER SN12000-2140) 089767 PLATE/WEAR ASSY .............2
650791 CB 1/2X1-3/4 ...................8 (AFTER SN22800-2170)
a) Unit is equipped with (2) Skid Shoes as standard equipment
b) For replacement order 097997
Printed In U.S.A. 37 906305/1 P192
MC2140/2170 • OPTIONS
803584 Tall Crop Divider
Ref. Part Qty. No. No. Part Name Req.
01 290-32472 DIVIDER/TALL CROP . . .. ...... .. 1 650731 CS 3/8X3-1/2 (N,L) . . ... . ....... 2
803588 Narrow Windrow Guides
(Before SN12001-2140 & SN22801-2170)
2
Ref. Part Qty. No. No. Part Name Req.
01 330-33305 GUiDE/RIGHT . .. ..... . ..... . .... 1 650687a CB 5/16X3/4 .... .. .... . ...... . .. 2 650953 THMS 3/8X3/4 (FLN) ....... . .... 1
02 330-33304 GUIDE/LEFT .... ... .......... .. . 1 6506878 CB 5/16X3/4 ... ............. ....2 650953 THMS 3/aX3/4 (FLN) . .. .... .. ... 1
a) Hex Nut from unit required (Not Illustrated)
90630511 P192 38 Printed In U.S.A.
NUMERICAL INDEX
Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref. No. No. No. No. No. No. No. No. No. No. No. No.
6H 154 15 07 071119 05 10 082827 25 19 090086 15 24 H7547A 25 15 071119 33 082980 27 14 090086 16 H7547A 27 15 071119 33 082984 13 09 090087 16 01 004146 17 01 071272 33 05 083357 35 08 090088 16 02 004942 15 03 072624 14 06 083357 36 05 090089 16 04
020000 076099 36 09 083397 13 20 090090 16 05 027003 20 06 076099 37 02 083689 11 16 090091 16 07 027003 23 03 076159 23 23 083690 11 15 090092 16 08
040000 076586 14 11 083729 25 19 090093 16 09 040644 34 05 076588 23 19 083730 27 19 090094 16 10
042162 14 03 076958 10 07 084242 28 14 090096 16 12 042163 14 02 076958 11 07 084242 29 14 090097 16 13 044090 18 14 077031 21 17 084242 31 17 090098 16 14 044090 19 24 077601 18 03 084242 32 17 090099 16 15
044965 17 02 077601 19 03 084595 16 06 090493 16 16 045327 30 08 077836 33 07 086924 29 18 090494 16 17
045582 14 12 077837 33 04 086926 31 13 090495 16 19 046000 14 13 077838 33 05 086926 32 13 090496 16 20 046001 14 14 077839 33 06 086927 31 12 090580 25 14
047523 30 11 077840 33 02 086927 32 12 090584 08 02 047524 30 10 077841 33 03 086928 31 11 090620 27 14 048182 23 12 078580 13 11 086928 32 11 090655 25 14 048967 04 13 079716 14 01 086930 31 18 090673 08 14 048967 05 12 079923 13 13 086930 32 18 090674 08 11 049038 07 35 080000 086931 31 16 090692 27 14
050000 080795 14 04 086931 32 16 090706 19 13
050056 25 15 081377 07 13 087362 19 09 090760 19 08
050056 27 15 081462 33 02 087756 04 07 090770 23 25
054031 23 29 081463 33 04 087756 05 07 090796 23 25
054848 09 15 082603 07 21 087758 04 06 090871 07 21
056640 18 15 082603 09 13 087758 05 06 090871 08 13
056773 04 04 082604 09 02 088739 25 14 090938 23 01
056773 05 04 082620 07 22 088841 04 11 090939 23 25
059743 04 12 082621 07 32 088841 33 090941 23 25
059743 05 11 082623 07 22 089131 16 18 090943 04 02
060000 082679 25 14 089133 16 03 090947 13 09
060471 35 12 082682 23 25 089134 16 21 090949 15 26
060629 35 21 082685 23 25 089205 31 10 091372 28 06
060635 25 15 082687 23 21 089205 32 10 091373 28 10
060635 27 15 082688 23 01 089207 31 07 091373 29 10
061276 33 01 082694 13 08 089207 32 07 091374 28 13
061276 33 01 082697 10 02 089262 19 05 091374 29 13
061293 33 02 082697 11 02 089286 31 15 091375 28 17
061294 33 03 082699 13 17 089286 32 15 091375 29 17
061295 33 04 082701 07 02 089287 32 01 091376 28 15
065180 09 10 082705 13 21 089767 37 07 091376 29 15
066452 35 10 082712 10 14 089867 18 13 091377 28 08
066452 36 07 082712 11 14 089871 18 02 091377 29 08
066717 14 09 082714 11 13 089872 18 04 091378 28 07
068642 13 12 082717 11 12 089872 19 02 091379 31 01
068938 08 15 082720 10 01 089960 31 08 091382 25 20
070000 082720 11 01 089960 32 08 091382 27 20
070856 07 19 082723 13 07 090000 091383 25 21
071119 04 11 082724 25 01 090006 08 11 091383 27 21
Printed In U.S.A. 39 906305/1 P192
NUMERICAL INDEX
Part No.
Page Ref. No. No.
Part No.
Page No.
Ref. No.
Part No.
Page No.
Ref. No.
Part No.
Page No.
Ref. No.
091389 25 04 117086 08 02 520093 21 05 030-31904 07 12 091389 27 03 120000 520093 28 03 030-31906 19 20 091571 25 21 124127 04 08 520093 29 03 030-31908 21 14 091571 27 21 124127 08 14 520159 15 25 040-00000 091572 25 20 124128 08 11 520195 18 12 040-33323 05 07 091572 27 20 124129 08 11 520195 19 21 040-33324 05 06 091870 14 04 124190 19 20 520201 14 08 040-33325 07 29 092012 29 06 124195 19 13 520204 17 04 040-33350 15 15 092013 29 07 124466 18 06 520205 21 10 040-33351 23 05 092015 28 16 124466 19 18 520206 21 11 040-33352 35 09 092015 29 16 124472 15 28 550041 14 05 040-33352 36 06 092021 33 03 124477 34 01 580116 35 06 040-33368 30 02 092201 10 20 124478 34 06 580116 36 03 045-31361 18 06 092204 10 20 124484 28 05 600000 045-31361 19 18 092207 10 21 124484 29 02 600324 17 05 045-31395 15 04 092208 10 21 124737 27 15 600759 17 02 045-31396 15 20 092406 10 22 125155 18 16 610748 13 10 045-31404 10 23 093509 19 17 125155 19 25 650977 23 28 045-31404 11 20 094134 28 07 125882 07 37 653102 14 10 045-31406 07 20 094142 31 02 125883 07 38 654006 21 18 045-31407 07 05 094154 28 06 126259 19 22 655018 10 03 045-31417 15 07 094155 28 17 126297 21 21 655018 11 03 090-00000 094157 31 01 126320 27 03 655537 17 22 090-32297 10 06 094283 33 08 126339 28 01 655537 30 17 090-32297 11 06 097332 10 13 126339 29 01 660033 17 11 090-32306 34 04 097333 10 13 126341 15 26 800000 110-00000 097334 10 13 126342 15 12 803098 04 14 110-10655 25 11 097335 10 13 126342 28 18 803098 05 13 110-10655 27 11 097407 07 02 126342 29 19 803564 34 110-32316 25 17 097596 04 08 500000 803565 35 110-32316 27 17 097596 08 14 500076 20 11 803584 38 110-32323 25 05 097597 36 01 500178 19 08 803586 37 110-32323 27 04 097598 10 16 510023 29 12 803587 37 110-32330 25 07 097599 10 15 510023 31 06 803588 38 110-32330 27 07 097600 10 16 510023 32 06 804681 37 110-32334 25 09 097601 10 15 510100 28 11 804861 36 110-32334 27 09 097772 07 02 510100 29 11 804891 37 110-32336 25 04 097775 04 02 510100 31 05 804892 37 110-32336 27 03 097827 13 15 510100 32 05 805321 34 110-32341 25 10 097828 13 21 510114 28 09 010-00000 110-32341 27 10 097857 13 21 510114 29 09 010-31091 30 04 110-32342 25 03 097859 097859
04 08
05 10
510114 510114
31 32
03 03
010-32301 010-32322
23 18
27 01
110-32342 110-32349
27 25
02 13
I 097860 097918 098032
36 36 20
02 08 01
510202 510223 520033
30 28 17
13 12 03
010-32388 23 010-32392 15
020-00000
27 01
110-32349 110-32354 110-32405
27 23 25
13 31 22
098235 21 098237 21
110000 111377 07 115726 19 115727 19 117085 07 117085 08
06 19
36 22 23 21 13
520054 520065 520065 520085 520085 520090 520092 520092
14 20 23 20 23 30 28 29
07 08 04 07 02 03 04 04
020-32214 15 020-32215 23
030-00000 030-13498 23 030-17662 07 030-17662 08 030-17662 09 030-31888 23
06 09
16 03 01 01 11
110-32405 110-32409 110-32409 110-32410 110-32416 120-32764 120-32769 120-32773
27 25 27 27 23 07 05 23
01 08 08 06 21 02 02 01
906305/1 P192 40 Printed In U.S.A.
NUMERICAL INDEX
Part No.
Page Ref. No. No.
Part No.
Page Ref. No. No.
Part No.
Page Ref. No. No.
Part No.
Page Ref. No.
-120-32774 23 17 220-32519 07 31 320-32615 31 04 360-32509 15 23 130-13131 17 14 220-32520 07 23 320-32615 32 04 360-32510 21 13 140-32176 17 17 220-32528 37 01 320-32616 31 09 360-32511 21 15 140-32240 17 15 220-32529 34 02 320-32616 32 09 360-32512 15 16 160-32163 17 12 220-32566 23 32 320-32632 17 06 360-32513 23 13 160-32210 17 08 230-24034 17 09 330-33259 10 14 360-32514 37 06 160-32361 23 26 230-27194 17 18 330-33259 11 14 360-32520 21 15 160-32632 11 16 230-32183 17 10 330-33260 11 12 370-18061 20 10 160-32633 11 15 230-32500 13 17 330-33261 11 13 370-32100 19 05 160-32646 19 01 240-31990 21 06 330-33262 10 01 370-32112 19 09 160-32707 23 26 240-32029 08 04 330-33262 11 01 370-32113 20 03 170-32999 35 05 240-32029 09 04 330-33269 04 01 370-32142 15 02 170-33175 35 07 240-32032 18 05 330-33269 05 01 380-10448 34 03 170-33175 36 04 240-32033 19 13 330-33279 07 07 380-14677 23 10 170-33762 04 09 240-32034 15 08 330-33283 13 06 380-25728 15 17 170-33762 05 08 240-32035 21 09 330-33284 13 15 380-32342 07 28 170-33762 35 01 240-32036 23 14 330-33296 37 03 380-32348 10 10 170-33767 04 10 240-32043 07 18 330-33297 13 14 380-32348 11 10 170-33767 05 09 246-26188 27 19 330-33299 30 14 380-32348 13 19 170-33767 35 03 250-10052 32 02 330-33300 30 12 380-32350 07 10 170-33772 09 14 250-19364 15 13 330-33301 13 01 380-32351 08 03 170-33776 09 11 250-32506 07 09 330-33302 30 01 380-32351 09 03 180-10194 17 07 250-32510 30 16 330-33303 37 07 380-32354 18 08 180-10909 15 09 250-32511 30 06 330-33304 38 02 380-32354 19 14 180-10909 23 08 250-32512 30 07 330-33305 38 01 385-27865 07 33 180-13696 19 10 250-32571 15 24 330-33424 37 07 385-27865 18 09 180-21917 19 07 250-32571 17 335-32129 17 16 385-27865 19 15 180-32134 17 21 260-25753 15 19 335-32189 17 19 390-16339 21 07
200-00000 260-32251 23 07 340-16454 25 16 390-16339 25 18 200-32366 21 08 260-32252 15 05 340-16454 27 16 390-16339 27 18 200-32448 21 16 260-32253 15 18 340-16455 25 16 390-21979 05 05 200-32504 07 24 260-32253 21 01 340-16455 27 16 390-32585 21 07 200-32505 07 27 260-32265 20 01 340-32015 25 15 390-32643 10 08 200-32506 07 08 290-32461 10 02 340-32015 27 15 390-32643 11 08 200-32507 07 11 290-32461 11 02 340-32063 27 14 390-32656 37 04 200-32509 23 15 290-32462 10 04 350-32475 15 27 390-32657 23 06 200-32511 34 01 290-32462 11 04 350-32485 31 14 390-32658 13 18 210-19533 23 20 290-32468 15 14 350-32485 32 14 390-32659 37 05 210-31017 23 30 290-32469 23 25 360-14855 21 12 390-32660 35 04 210-32045 17 13 290-32470 23 25 360-21711 15 10 390-32661 35 02 220-16199 13 04 290-32471 13 02 360-32359 25 06 390-32696 10 17 220-18200 10 11 290-32472 38 01 360-32359 27 05 390-32696 11 17 220-18200 11 11 300-00000 360-32404 25 12 390-32703 23 18 220-19812 20 05 300-31918 13 07 360-32404 27 12 400-00000 220-21516 15 11 300-31919 13 08 360-32499 07 06 400-10627 23 24 220-32513 10 09 310-16296 23 22 360-32500 07 04 400-15947 21 20 220-32513 11 09 310-32513 07 15 360-32503 18 10 400-18916 10 18 220-32514 04 03 310-32513 08 07 360-32503 19 11 400-18916 11 18 220-32514 05 03 310-32513 09 07 360-32504 18 11 400-20466 15 07 220-32515 07 30 310-32515 19 16 360-32504 19 12 400-21904 07 25 220-32516 07 01 320-32577 17 20 360-32505 20 02 400-32443 08 09 220-32517 07 14 320-32578 20 04 360-32506 20 09 400-32443 09 09 220-32518 08 08 320-32579 30 09 360-32507 15 21 400-32443 10 01 220-32518 09 08 320-32580 30 15 360-32508 15 22 400-32443 10 03
Printed In U.S.A. 41 906305/1 P192
NUMERICAL INDEX
Part No.
Page Ref. No. No.
Part No.
Page No.
Ref. No.
Part No.
Page No.
Ref. No.
Part No.
Page Ref. No. No.
400-32443 11 01 400-32443 11 03 400-32447 19 06 410-32402 19 04 420-30377 10 05 420-30377 11 05 420-30377 13 03 420-33066 08 12 420-33066 09 12 420-33903 10 19 420-33903 11 19 420-34436 13 16 420-34437 13 22 420-34438 13 24 420-34447 13 23 420-34448 13 05 480-27676 07 16 480-27676 07 26 480-27676 08 06 480-27676 09 06 480-27676 18 07 480-27676 19 19 480-42010 34 06 480-42349 07 34
906305/1 P192 42 Printed In U.S.A.
Notes
Printed In U.S.A. 43 906305/1 P192
Notes
906305/1 P192 44 Printed In U.S.A.
TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE
All Torque Values are In Ft-Lbs unless otherwise stated.
(Multiply In-Lb value* by 0.113 or Ft-Lb value by 1.355 to obtain metric Nm value.)
Bolt GR.2 GR.5 GR.8 Size
Lub. Dry Lub. Dry Lub.
* In·Lb
NOTE: These torque values are to be used for all GEHL hardware excluding: Locknuts, Self-tapping Screws, Thread Forming Screws and Sheet Metal Screws. Unless otherwise specified, all torque values must meet this speCification.
Attaching Hardware Table
Size & Part Size & Part Size & Part Size & Part Description Number Description Number Description Number Description Number
#6 L 654044 5/16 IN 653034 3/8 P 654006 5/8JN 653047 #6-32 N 650658 5/16 L 654024 7/16 L 654028 5/8 L 654032 #6 P 650848 5/16NF-JN 653036 7/16 NF-N 653016 5/8 N 653021 #10 L 650549 5/16 NF-N 651062 7/16 P 654046 5/8 NILN 067823 #10-24 N 650550 5/16 NILN 064260 1/2 L 654030 5/8 P 654012 #10-32 N 650648 5/16 P 654004 1/2 LN 071706 3/4 NF-SN 6531 19 #10 P 654017 3/8 L 654026 1/2 N 653018 3/4 NILN 079209 1/4 L 654022 3/8 N 653010 112 NF-JN 653045 3/4 P 654014 1/4 NF-N 650546 3/8 NF-JN 653039 1/2NF-NILN 064373 1-1/4 NF-SN 650964 1/4 NILN 071401 3/8 NF-N 650552 1/2 NILN 068034 METRIC 1/4 P 654002 3/8 NILN 067847 1/2 P 654009 M5/.8 N 656100
FARM EQUIPMENT GEHL COMPANY \NEST BEND, \NISCDNSIN 53095 U.S.A.
Printed In U.S.A. e GEHL Company 1992 906305/1 P192
