TÜV SÜD

Fluid Dynamics

2X

TÜV SÜD is sensitive to the pressures you face. We work closely with our customers to understand the specific test parameters, timing constraints, test frequencies, budgets and other variables of their projects. TÜV SÜD will then develop a proposal which optimizes all of these factors.TÜV SÜD has helped many of our customers develop safe and dependable products that require testing with fluids at various temperatures, pressures and flows. We accurately conduct testing that requires precise control and monitoring of multiple variables. At TÜV SÜD, we have the experience, skill, flexibility and resources to assembly equipment to meet your test needs. If you need to simulate a specific environment or condition, we can help.

Capabilities Radiator Thermal Cycle Glycol Pressure Cycle Oil Cooler Pressure Cycle Charge Air Cooler (CAC) Thermal Cycle Charge Air Cooler (CAC) Pressure Cycle

TÜV SÜD America has over a decade of experience testing cooling system components. As a result, we have used our expertise to develop a multitude of unique testing systems, not only for own labs but the labs of our customers. We can directly apply this experience to your specific test situation utilizing a variety of fluids such as, water, glycol, air, corrosive solutions, or others.

We have developed testing solutions for: Radiators Charge Air Coolers Heater Cores Oil Coolers Hoses and Ducts Connectors Bottles and Caps Condensers Other Cooling System Components

Oil Cooler Pressure Cycle Testing Oil pressure cycled from 0 -1000+ psi Temperatures up to 125 °C

Charge Air Cooler Thermal Cycle Testing Fully closed loop controlled system Pressure up to 175 kPa pressure 200°C r T (30°C up to 230°C) Variable temperature ramp rates Flow ranging from 200 to 2100 kg/hr (±40 kg/hr) Up to 6 samples tested

Charge Air Cooler Pressure Cycle Testing Air from 0 - 60 psi r P Inlet temperatures up to 280°C Up to 8 samples tested

Why choose TÜV SÜD?We have extensive experience in providing testing and expert advisory for many different product industries around the world. Our standing as an independent and impartial third-party assessor instills confidence in the quality and safety of your product.

Choose certainty. Add value.TÜV SÜD is a premium quality, safety and sustainability solutions provider that specialises in testing, inspection, auditing, certification, training and knowledge services. Represented in over 800 locations worldwide, we hold accreditations in Europe, the Americas, the Middle East and Asia. By delivering objective solutions to our customers, we add tangible value to businesses, consumers and the environment.

Burst Leakage Vacuum Internal Corrosion and Erosion PVT for Hoses and Radiators Calcium Chloride Test

Radiator Thermal Cycle Testing Automotive: Temperature: -20 °C to 120 °C Temperature transition in 20 seconds Flow up to 36 gpm (136 lpm) Closed loop pressure - up to 30 psi (200kPa)

Off-Highway: Temperature: -10 °C to 110 °C Controlled temperature ramping Flow up to 100 gpm (378 lpm)

Locomotive: Temperature: 10 °C to 90 °C Controlled temperature ramping Flow up to 200 gpm (756 lpm)

Glycol Pressure Cycle Testing Three types of pressure cycle tests Test with minimum flow to maintain temperature,

0 - 60 psig, 140°C Static pressure at room temperature or ambient

temperature, 0 - 200 psig Steady state flow up to 35lpm , 0 - 40 psig, 125°C

TÜV SÜD America 10 Centennial Drive, Peabody, Massachusetts 01960 United States(800) 888-0123 info@tuvam.com www.tuv-sud-america.com

Related services

TÜV SÜD provides the following related services: Electronics Testing Automotive Battery Testing EMC Testing Connector Testing Environmental and Vibration Testing

7 | 2

013

| © T

ÜV S

ÜD A

mer

ica

Inc.

| US-

MKG

| PO

S 33

05