Upload
lucian-balan
View
224
Download
0
Embed Size (px)
Citation preview
8/2/2019 EN-PK635M 4.11
1/21
User Guide
ViewCamModel : PK-635M
www.a4tech.com
http://www.a4tech.com/http://www.a4tech.com/8/2/2019 EN-PK635M 4.11
2/21
Know your product
1
Microphone
8/2/2019 EN-PK635M 4.11
3/21
2
Specification
Image Sensor: 1/4CMOS, 640480pixels
Frame Rate: 30fps@640x480, @800x600, @320x240,
@160x120
Lens: F=2.4, f=7.2mm
View Angle: 54 degree
Focus Range: Automatic focus, 10cm to infinity
Exposure Control: Automatic
White Balance: Automatic
Still Image Capture
Res.:
1280x960,800x600640X480352x288320x240
176x144160x120
Flicker Control: 50Hz, 60Hz and None
Computer Port USB/MIC .port
Installing cameras driver
NOTE: Please uninstall any previous installed Webcam
Software before installing A4tech ViewCAM. And do not
connect the camera to the computer until its driver is installed
completely!
All of the images is captured in WindowsXP OS.
1. Insert the included CD into the CD-ROM that will auto-run
and the menu window will pop up, select to click on InstallViewCAM.
8/2/2019 EN-PK635M 4.11
4/21
2. Clicking the Install ViewCAM button to install the driver in
above image
3
8/2/2019 EN-PK635M 4.11
5/21
3.Then follow the installing instruction to complete the
installation process
4. the Installation Process is completed
4
8/2/2019 EN-PK635M 4.11
6/21
5. And click the button Finish above to complete installation.
Then the shortcut icon of Amcap and Zoom images
will appear on the desktop screen.
6. Now, please connect the PC Camera device with the
computer, and restart your computer.
Amcap UsageAfter installation of viewcam driver, you can preview image and
set the adjustments for the properties sheet through the image
application software which comes with the product.
Image-preview
Click icon on the desktop and the Amcap image
application will pop-up or from start to application A4TECH
PC Cameraand click Amcap by mouse the application image
will appear shown as below
5
8/2/2019 EN-PK635M 4.11
7/21
if Amcap image fails to appearplease select the item
6
8/2/2019 EN-PK635M 4.11
8/21
preview under the Options shown as below :
Device description
Go to Devices and select A4 Tech PC Camera.
(Refer to below diagram)
7
8/2/2019 EN-PK635M 4.11
9/21
Properties page configuration
Click Video Capture Filter under Options of Amcap page.
(Shows in image below)
The Camera Control sheet in properties window will be opened,
and some functions can be adjusted at here according to the
needs, including Image Control, WhiteBalance, Auto Mode
Control (Showing in image below)
8
8/2/2019 EN-PK635M 4.11
10/21
Advanced settingsThe camera offers the image special effect and video special
effect settings for the users, our design engineers have defined
23 special effect settings, by using them, it will allow you to
operate easily and edit the images more efficiently, showing as
below.
9
8/2/2019 EN-PK635M 4.11
11/21
To select the Face Tracking sheet, the wonderful face tracing
function can be regulated at this page!
10
8/2/2019 EN-PK635M 4.11
12/21
Digital ViewCam adjustable focus description
The camera can provide 10 times adjustable focus function
under CIF(320240)resolution, accompanying digital adjustable
control pole .Level-sliding zoom image and the special
filter make images more clear, See the control page and select
the options after adjusted focus or select digital
11
8/2/2019 EN-PK635M 4.11
13/21
adjustable focus control pole
NOTE It totally supports QQMSN .etc video chat software
under 352*288320*240176*144160*120 etc resolutions.
Checking connection of PC camera
1. Plug the USB cable to the computer USB Port.
2. Restart your computer when Installation is completed.
3. Double click My Computer icon->Control Panel-> System
->Device Manager ->Imaging Device; if you see A4 Tech PC
Camera H, then your camera is now installed.
Double click My Computericon->ControlPanel->System->Hardware->Device Manager->Imaging Device; if yousee A4 Tech PC Camera H, then your camera isinstalled.
Uninstalling Driver
12
8/2/2019 EN-PK635M 4.11
14/21
ClickStartfrom the task bar
and choose Programs. Select
A4 Tech PC Camera H
->Uninstall and follow the
instructions.
VP-EYE
The latest version of VP-EYE offers a new look that makes image
editing much more fun and intuitive.There are a lot of improvements
and enhancements that comes with VP-EYE 4.0 here are some of
the new features that you can expect in VP-EYE 4.0.
13
1. Enter the setup interface of the ViewCam driver installation
2. Click "VP-EYE" for increment application installation, the below
8/2/2019 EN-PK635M 4.11
15/21
interface as shown in the picture will automatically pop up foryour setup.
3. Then click Next to finish it.
4. If the VP-EYE Icon appear on your desktop, then you havsuccessfully Installed the VP-EYE Software.
5. Double Click VP-EYE icon, will appear below window.
14
8/2/2019 EN-PK635M 4.11
16/21
(Image 1)
6. Click the help icon in above window (as show Image 1you will know more function introduction about this VP-EYFuntions.
Troubleshooting
Question 1: There is no the selecting item for the pixel of800x600, 1024x768, 1280x960 in the image window
Solving Method: please install the DirectX9.0 or above version
for your computer.
15
8/2/2019 EN-PK635M 4.11
17/21
16
Question 2: Computer cant detect the View Cam
Solving Method: Check if computers OS (Operating System),
BIOS, USB Port or installation errors occurs.
Steps: Windows 95 doesnt support USB port. You have to
update your OS to Windows 98 or above to support USB port
and ensure BIOS Setup and USB settings are available. If the
problem still occurs, please try connecting the USB ViewCam to
your machine via another USB socket.
Question3 My video image is too dim or too light.Solving Method: Adjust the brightness and contrast
background.
Steps: Because the ViewCam can be easily affected by light,
therefore, we suggested proceeding from usage environment
and screen object such as increasing object brightness ormoving light source.
Question 4: Color is defective
Problem: After installation, if you found the image is not as
expected as you want. Is the color part defective?
Solving Method: Adjust the color settings related to video
snapping course options or have the color settings related set as
default
8/2/2019 EN-PK635M 4.11
18/21
17
Question5: Blank screen or black screen
Symptom: During the usage course after the image frame
pops up, the Blank screen or black screen will occur?
Method 1: Make sure that the ViewCam driver is installed fine.
Method 2: Ensure the Preview" under Option" tab is selected
and applied.
Method 3: If your computer OS is first version of WIN 98, then
you need to update the OS to WIN98 SE or above or download
DirectX8.0 or version above patch application from site then
reset your computer.
Question 6: Bloom screen occurs during the course of
usage
Method 1: Check if USB power is clean, because the
ViewCam is easily affected. If the USB power wave is too large,
then such problem will occur. You may use another computerto test it.
Method 2: Check if the driver conflicts with other computer
hardware devices.
Method 3: Check the ViewCam driver and match it with
ViewCam model; in addition also use other video cards to
confirm if the current video card and its driver are incompatible
with ViewCam.
8/2/2019 EN-PK635M 4.11
19/21
18
Question 7 The ViewCam cant work normally under thelaptop/notebook
Because the USB ViewCam can easily conflicts with video card,
therefore, please follow this path: " my computer----> control
panel -----> system-----> device management ----->Video Card
And other pointing devices ------>A4tech View Cam , then
define and double-click A4tech.port View Cam ". After
opened a window, please check the tab "resource to find the
conflict information. If it is conflicted with other video card, you
should try to change an IRQ of them.
Question 8Remote video isnt smooth as expectedThis issue is caused by two reasons:
The actual net band with is not enough and you are suggested
to modify the conference properties to decrease the video
occupying bandwidth or to reduce the contemporaneous
windows numbers2) Please check the computer CPU space occupying rate and
if it is too high then please decrease it to reduce the
contemporaneous windows numbers.
Question 9How come I couldnt hear any sound via MSNMessenger even after the successful installation of the
driver?
1. Maybe the micro voice is not enable, so please click the
voice icon in the system tray at the right bottom of computer
8/2/2019 EN-PK635M 4.11
20/21
19
screen to check if the micro voice is enable, if not, please enable
it in the control volume.
2. Sometimes, the MSN messenger is too old to support both
sound card and your ViewCam, so please upgrade your MSN
messenger to support your ViewCam and sound card.
Question 10: How come the system always asks me to
install the driver while I have successfully installed?
A: Because you have plugged the ViewCam before installation.
Please follow the steps below to do the installation again.
1. Unplug the ViewCam from your computer2. Uninstall the former AMCAP driver
3. Restart your computer;
4. Install the driver;
5. Restart your computer;
6. Plug the ViewCam into your computer and let it search the
hardware;7. Restart your computer, and you should find it is ok now!
Question 11: There hasnt any prompt authentication
through the Microsoft micro sign in the installation process,
the system maybe unstable if continue installing possibly.
How deal with it?
Method: please still click " continue to install" .
Because this camera could not cause the unstable status of
computer system.
8/2/2019 EN-PK635M 4.11
21/21
20
Systems requirements
Personal Computer, Laptop, Desktop, or IBM Compatible
Computer with Pentium 166MHz minimum, and with an active
USB (universal serial bus) port.
Windows98SE, ME, 2000, XP, MCE2005, XP(X64), VISTARX86
TECH SUPPORT
For tech support, please visit our website at
http://support.a4tech.com/or email us at [email protected]
http://support.a4tech.com/mailto:[email protected]:[email protected]://support.a4tech.com/