E200 Series - Müggler Engineering

E200 SeriesHYUNDAI WIA CNC Turning Center

The CNC Turning Center E200 Series , designed by Hyundai WIA with years of expertise and the latest technology, is designed to maximize productivity by enhancing both technical performance and economic efficiency.

Technical Leader

6″ 8″ LM Box Standard TurnMill

Chuck Guideway Turret

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

MODEL

E200A

E200C

E200�MA

E200MC

E200PA

E200PC

High Speed, Rigidity and ProductivityEconomical CNC Turning Center for next generation

E200 Series● 45° slanted one-piece bed structure with high rigidity

● Stabilized unit structure to minimize thermal displacement

● High productivity achieved with its mechanism

● Unbeatable rapid traverse rate : 36m/min {1,417ipm} (E200A/MA/C/MC)

● The most reliable high speed servo turret : 0.1sec/step

● Application of boxguideways for heavy duty cutting (E200PA/PC)

● Compact design suitable for installation in restricted space.

● Ergonomic design for convenient access to chuck and tool

01 Basic FeaturesThe Best Productivity 6 inch / 8 inch Compact CNC Turning CenterE200 Series

Main�SpindleHeat produced by the main spindle is blocked by applying a symmetric one-piece base and an insulation plate. This enables maintenance of high accuracy even during a long period of machining.

TurretThe turret is driven by a servo motor at a remarkably high speed indexing time of 0.12sec/step. Cycle time is reduced and productivity is improved.

Ball�ScrewIn order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews.

High�Precision,�High�Rigidity�One-piece�StructureThe E200 Series is designed with a 45 degree slanted bed combined with square type and tube type rib structure. This special design enhances rigidity and vibration absorbing capability, allowing powerful cutting with high precision.

01

04

0302

LM�Guideway(E200A/MA/C/MC)

Box�Guideway(E200PA/PC)

GuidewayE200A/C is designed with LM Guideways for all axes for better speed and response.

LM Guideway reduces non-cutting time and achieves a rapid traverse rate of 36m/min, which increases productivity.

E200PA/PC is designed with box guideways for all axes for stable heavy duty cutting.

◉�Rapid�Traverse�Rate�(X/Z axis)

E200A | E200C | E200MA | E200MC : 36/36 m/min (1,417/1,417 ipm)

E200PA | E200PC : 24/24 m/min (945/945 ipm)

◉�Travel(X/Z axis)

E200A | E200C : 210/330mm (8.3″/13″) E200MA | E200MC : 210/286mm (8.3″/11.3″) E200PA | E200PC : 210/310mm (8.3″/12.2″)

Reductionofnon-cuttingtimebytraverserate

04+

05

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Basic Features

01

02

04

03

02 High Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterE200 Series

Main�SpindleThe spindle has a wide span of nominal production. The spindle structure is designed to minimize thermal displacement and perform high precision cutting during high speed and repeated cutting. By enlarging the spindle diameter and thickness, its rigidity is increased. Especially, high precision angular ball bearing designed spindle reduces noise and increases accuracy.

Tail�StockIt is possible to process with stability by adopting 80mm(3.1″) movable tailstock as an option

Taper : MT4Quill Dia. : Ø65 (Ø2.5″)Travel : 80 mm (3.1″)

0.001° C-Axis�ControlC-axis with BZ-Sensor performs 0.001°(Command) split angle and position control in order to process various products. (E200MA/MC)

Spindle

06+

07

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

15kW [20HP] (15min)

Spindle Speed (r/min)


95.5N∙m [70.4lbf∙ft] (15min)95.5[70.4]

15[20]

11[14.7]

15[20]

11[14.7]

15[20]

167[123]

92[67.8]

52.5[38.7]

52.5N∙m [38.7lbf∙ft](Cont.)

70N∙m [51.6lbf∙ft](60min)11kW [14.7HP] (60min, Cont.)

6,000

1,143 2,570

2,000 3,0001,500

15kW [20HP] (30min)

E200C/MC/PC

167N∙m [123lbf∙ft] (30min)

Power(kW[HP]) Torque(N∙m[lbf∙ft])

E200A/MA/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])

92N∙m [67.8lbf∙ft](Cont.)

11kW [14.7HP] (Cont.)


75.6[55.7]

10.8[14.5]

9[12] 68.7

[50.6]

1,500500 4,500 6,000

E200A/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])

10.8kW [14.5HP] (S6 60%)

9kW [12HP] (Cont.)75.6N∙m [55.7lbf∙ft] (S6 60%)

68.7N∙m [50.6lbf∙ft] (Cont.)


132.3[97.6]10.8

[14.5]

9[12]

110.3[81.4]

857286 2,571 4,000

E200C/PCPower(kW[HP]) Torque(N∙m[lbf∙ft])

10.8kW [14.5HP] (S6 60%)

9kW [12HP] (Cont.)

132.3N∙m [97.6lbf∙ft] (S6 60%)

110.3N∙m [81.4lbf∙ft] (Cont.)


167[123]

206[152]

18.5[24.8]

2,000

18.5kW [24.8HP] (30min)

E200C

206N∙m [152lbf∙ft] (30min)


167N∙m [123lbf∙ft](Cont.)15kW [20HP] (Cont.)

15kW [20HP] (15min)



95.5N∙m [70.4lbf∙ft] (15min)95.5[70.4]

15[20]

11[14.7]

15[20]

11[14.7]

15[20]

167[123]

92[67.8]

52.5[38.7]

52.5N∙m [38.7lbf∙ft](Cont.)

70N∙m [51.6lbf∙ft](60min)11kW [14.7HP] (60min, Cont.)

6,000

1,143 2,570

2,000 3,0001,500

15kW [20HP] (30min)

E200C/MC/PC

167N∙m [123lbf∙ft] (30min)


E200A/MA/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])

92N∙m [67.8lbf∙ft](Cont.)

11kW [14.7HP] (Cont.)


75.6[55.7]

10.8[14.5]

9[12] 68.7

[50.6]

1,500500 4,500 6,000

E200A/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])

10.8kW [14.5HP] (S6 60%)

9kW [12HP] (Cont.)75.6N∙m [55.7lbf∙ft] (S6 60%)

68.7N∙m [50.6lbf∙ft] (Cont.)


132.3[97.6]10.8

[14.5]

9[12]

110.3[81.4]

857286 2,571 4,000

E200C/PCPower(kW[HP]) Torque(N∙m[lbf∙ft])

10.8kW [14.5HP] (S6 60%)

9kW [12HP] (Cont.)

132.3N∙m [97.6lbf∙ft] (S6 60%)

110.3N∙m [81.4lbf∙ft] (Cont.)


167[123]

206[152]

18.5[24.8]

2,000

18.5kW [24.8HP] (30min)

E200C

206N∙m [152lbf∙ft] (30min)


167N∙m [123lbf∙ft](Cont.)15kW [20HP] (Cont.)

FANUCSIEMENS1PH8ServoMotor

03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret E200 Series

TurretThe E200 Series has a high performance AC servo motor and 3-piece coupling attached to the turret which enhances its process reliability. Powerful hydraulic tool clamping minimizes tool tip deviation which happens due to the load during heavy duty cutting.

◉�Number of Tools : 12EA

◉�Tool Size (O.D/I.D)

□25/Ø32 (□1″/Ø1.3″)

◉�Indexing Time�:0.12sec/step


◉�Tool Size (O.D/I.D)

□25/Ø40 (□1″/Ø1.6″)


E200A�|�PA

E200C�|�PC


◉�Tool Size (O.D/I.D) □20/Ø32 (□0.8″/Ø1.3″)


E200MA�|�MC

08+

09

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Turret

Mill�Tool�HolderStraight Milling Head and Angular Milling Head live tools can be utilized to cut sides and inner diameters of workpieces. Also, Drill, Tap, Endmill and many more tools can be utilized to enhance productivity and efficiency.

VDI type turret enables reduction of tool change time and brings convenience to workers when changing tools.

◉ Output (Max./Cont.) : 8.8/3 kW (11.8/4 HP)

◉ Speed : 4,500rpm

◉ Collet size :Ø16 (Ø0.6″) (ER25)◉ Type :VDI30

Mill�Turret�(VDI)

U-Drill

Collet�&�Cap

Endmill

Endmill

Drill

Tap

Drill

Tap

Face�Cutter

Angular Milling HeadStraight Milling Head

04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterE200 Series

10+

11

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Machining

O.D Cutting

Face Cutting

Drilling

End Milling

I.D Cutting

O.D Hole Drilling

I.D Threading

Ball-End Milling

❖ The above results might be different by types of processing circumstance.

Machining�Variation

Sample Workpiece

E200A

Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge

Ø42(Ø1.65″)4 mm (0.157″)198 m/min (7,795ipm)1,500 r/min0.45 mm/rev (0.17 ″/rev)356 cc/min

Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

Ø70(Ø2.75″)Ø37 (Ø1.45″)104 m/min (4,094ipm)895 r/min0.4 mm/rev (Ø0.15″/rev)385 cc/min

DrillingCutting (O.D)

E200MA

Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

15 mm (0.59″)Ø12(Ø0.47″)36 m/min (1.417ipm)960 r/min0.5 mm/rev (Ø0.02″/rev)17 cc/min

Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed

20 mm (0.79″)M12/1.758 m/min (315ipm)212 r/min1.75 mm/rev (0.07″/rev)

Drilling Tapping

Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

15 mm (0.59″)Ø12(Ø0.47″)162 m/min (6,378ipm)995 r/min0.4 mm/rev (Ø0.15″/rev)180 cc/min

Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed

20 mm (0.79″)M12/1.758 m/min (315ipm)121 r/min1.75 mm/rev (0.07″/rev)

X-Axis Drilling Tapping

Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge

Ø42(Ø1.65″)4 mm (0.157″)198 m/min (7,795ipm)1,500 r/min0.45 mm/rev (0.17 ″/rev)356 cc/min

Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

Ø50(Ø1.97″)Ø22(Ø0.87″)28 m/min (866ipm)400 r/min0.4 mm/rev (Ø0.15″/rev)61 cc/min

DrillingCutting (O.D)

〈Material〈JIS〉:S45C(Carbon steel〉〈Material〈JIS〉:S45C(Carbon steel〉

〈Material〈JIS〉:S45C(Carbon steel〉


〈Material〈JIS〉:S45C(Carbon steel〉


05 Smart SystemSoftware for smart operating and machiningE200 Series

HYUNDAI WIA Smart System

for CNC

Turning Center

Monitoring Functions Energy Saving

Easy Programming

HW-MMS | HW-TMHW-ESS

HW-DPRO T/TM | HW-eDNC

User Friendly

Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.

USB�Port�(Standard)Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.

12+

13

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

HW-TM(HYUNDAIWIA–ToolMonitoring)

A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.

HW-DPRO�T/TM(HYUNDAIWIA–DialoguePROgramTurn/TurnMill)

Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)

HW-MMS(HYUNDAIWIA–MachineMonitoringSystem)

This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.

HW-eDNC(HYUNDAIWIA–EthernetDirectNumericalControl)

This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.

HW-ESS(HYUNDAIWIA–EnergySavingSystem)

An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.

HYUNDAI WIA Smart System

HYUNDAI-iTROLThe Powerful CNC platform for Machine Tools 06E200 Series

HYUNDAI�Intelligent�ControlConvenientandEasy-to-UseMachineTool...

Hyundai WIA take operator convenience to a higher level with the new controller, HYUNDAI-iTROL. Experience the new operating environment with HYUNDAI-iTROL.

14+

15

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

When power is on, HYUNDAI-iTROL gives the worker instructions to do warm-up.HYUNDAI-iTROL also informs the worker of machine problems beforehand by showing current machine status.

Smart System operation preperation

The three essential operations for machining are program check, tool measurement and coordinates system setup. HYUNDAI-iTROL provides three operations in consecutive order to prevent error and to enable quick and easy setup.

Quick & Easy Machining Support

Tool and spindle monitoring can be easily done with a simple operation. This helps with tool management, spindle protection and factory automation.

Tool & Spindle Monitoring

Easy input/output of programs is possible with the use of USB memory card, CF memory card and LAN.

COMMUNICATION FUNCTION

RJ 45 Ethernet

USB 2.0

Compact Flash Card

You can use energy saving function (ECO) and machining optimization function (SMART) with the MCP button.

iTROL TechnologyiTROL Convenient Function

Dynamicservocontrol,highlyefficientSiemensservodriveandSiemensservomotorwithdurabilityandquickresponsehavebeenapplied.

Controller

07 User ConvenienceVarious Devices for User Convenience

E200 Series

Parts�ConveyorThe parts conveyor transfers the finished workpiece unloaded by the parts catcher for user convenience.

Long Type 3m (118.1″)Max load processing capa. Ø42 (1.7″)Shot Type 1.5m (59.1″)Max load processing capa. Ø65 (2.6″)

Bar Feeder System

Bar�Feeder��Bar feeder system enables automation which leads to efficiency improvement.

RoundBarMaterial

Bar�Feeder Machining Parts�Catcher Parts�Conveyor

Bar�Feeder�Machining�Process

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Optional

16+

17

Gantry Loader System

Raw�Material In�Work�Stocker 1st�Machining

End�Product Out�Work�Stocker 2nd�Machining

The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables machining process flexibility and productivity enhancement.

Gantry�Loader�Machining�Process�

Turn�Over

Standard�&�Optional

Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexC-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)

High Pressure Coolant

Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)

Chip Wagon

Safety DeviceDoor Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque Limiter

6″8″6″8″

AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type

For Out-Dia

0.4Bar (5.8 psi)6Bar (87 psi)

135ℓ(35.7 gal)Front (Rear)Front (Right)

Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized

Spindle & Chuck Electric Device

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable

E200A/PA E200MA ● ● ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ○(CE:●) ○(CE:●) ○ ○ ● ● - ● - ● - ● - ☆ - ☆ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆

○ ○

○ ○

○ ○

○ ○

☆ ☆ ● ● ● ● ○(CE:●) ○(CE:●) ● ● ○ ○

E200A/PA E200MA ● ● ○ ○ ○ ○ ○ ○ - -

○ ○

● -

○ ○

● -

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ●

● ●

☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆

Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG

Spindle Load Meter(LED Type)

Spindle Speed Meter(LED Type)

Work CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit Breaker

ABS Encoder

AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)Environment

Air Conditioner

DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface

I/O Extension (IN & OUT)

Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. Cylinder

Standard Hyd. Unit

S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM

1Color : ■3Color : ■■■3Color : ■■■B

FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)DigitalDigitalDigital6ea9ea

FANUCHYUNDAI-iTROL

20kVA

TACOSMC

X axisZ axis

FANUCHYUNDAI-iTROL

16Contact32ContactMain SP.

Hollow35bar (507.6 psi)/ 11ℓ (2gal)

Need Munsel No.

Specifications are subject to change without notice for improvement.

SPECIFICATIONS

Standard�&�Optional

Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexC-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)

High Pressure Coolant

Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)

Chip Wagon

Safety DeviceDoor Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque Limiter

6″8″6″8″

AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type

For Out-Dia

0.4Bar (5.8 psi)6Bar (87 psi)

135ℓ(35.7 gal)Front (Rear)Front (Right)

Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized

Spindle & Chuck Electric Device

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable

E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ○(CE:●) ○(CE:●) ○ ○ ● ● - ● - ● - ● - ○ - ○ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆

○ ○

○ ○

○ ○

○ ○

☆ ☆ ● ● ● ● ○(CE:●) ○(CE:●) ● ● ○ ○

E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ - -

○ ○

● -

○ ○

● -

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ●

● ●

☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆

Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG

Spindle Load Meter(LED Type)

Spindle Speed Meter(LED Type)

Work CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit Breaker

ABS Encoder

AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)Environment

Air Conditioner

DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface

I/O Extension (IN & OUT)

Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. Cylinder

Standard Hyd. Unit

S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM

1Color : ■3Color : ■■■3Color : ■■■B

FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)DigitalDigitalDigital6ea9ea

FANUCHYUNDAI-iTROL

20kVA

TACOSMC

X axisZ axis

FANUCHYUNDAI-iTROL

16Contact32ContactMain SP.

Hollow35bar (507.6 psi)/ 11ℓ (2gal)

Need Munsel No.


18+

19

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

unit : mm(in)External�Dimensions

SPECIFICATIONS

1443(56.8)577(22.7)

2020(79.5) 2050(80.7) 1260(49.6) 1230(48.4)

3280(129.1)

380(

14.9

)12

70(5

0)

2150

(84.

6)

500

R500

1000(39.3)

SPINDLE CENTER

1100(43.3)550(21.6)

1650(65)910(35.8)

2560(100.7)

10 (0.4

)66

5((2

6.2)

335

(13.

2)10

35(4

0.7)

110

(4.3

)11

45(4

5)67

5(26

.5)

1820

(71.

6)

380(14.9)

SPLINDLE CENTER

950(

37.4

)27

5(1

0.8)

192

(7.5

)12

24(4

8.1)

1416

(55.

7)

950(

37.4

)27

5(1

0.8)

192

(7.5

)12

24(4

8.1)

1416

(55.

7)

538(21.2)8(0.3)

920(36.2)933(36.7)

Ø16

9(6.

6)Ø

210(

8.2)

E200A/MA/PA E200C/MC/PC

12 Stations

VDI 3012 Stations

O.D Holder

I.D Holder

Boring BarSocket

Facing Holder

Face & I.DTool

Boring Bar

Drill

Boring BarBoring Bar

Socket

U-Drill Socket U-Drill Holder

Boring BarHolder Pice

Facing Holder

Face & I.D Tool

Boring BarØ32

Drill

U-Drill

Tap

End Mill

StraightMill Holder

Milling Collet

Tapping Collet

AngularMill Holder

Plug

unit : mm(in)Tooling�System

20+

21

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

E200A/PAE200C/PC

Right/Left

Single

Ø32 (1.25″)

Ø40 (1.57″)

Standard

Standard

Ø8 (5/16″)

Ø10 (3/8″)

Ø12 (1/2″)

Ø16 (5/8″)

Ø20 (3/4″)

MT 1 × MT 2

MT 2

O.D Holder

Facing Holder

I.D Holder

U-Dril Holder

Straight Mill Holder

Angular Mill Holder

Boring

Drill

ER Collet

Turning Holder

Driven Holder

Boring Holder

Socket

ITEM E200A/PA E200C/PC

- -

1 1

5 5

Opt -

- Opt

- -

- -

- -

1 1

1 1

1 1

1 1

1 1

1 1

- -

Tooling�Parts�Detail


unit : mm(in)Tooling�System

SPECIFICATIONS

12 Stations

VDI 3012 Stations

O.D Holder

I.D Holder

Boring BarSocket

Facing Holder

Face & I.DTool

Boring Bar

Drill

Boring BarBoring Bar

Socket

U-Drill Socket U-Drill Holder

Boring BarHolder Pice

Facing Holder

Face & I.D Tool

Boring BarØ32

Drill

U-Drill

Tap

End Mill

StraightMill Holder

Milling Collet

Tapping Collet

AngularMill Holder

Plug

E200MAE200MC

Right/Left

Single

Ø32 (1.25″)

Ø40 (1.57″)

Standard

Standard

Ø8 (5/16″)

Ø10 (3/8″)

Ø12 (1/2″)

Ø16 (5/8″)

Ø20 (3/4″)

MT 1 × MT 2

MT 2

O.D Holder

Facing Holder

I.D Holder

U-Dril Holder

Straight Mill Holder

Angular Mill Holder

Boring

Drill

ER Collet

Turning Holder

Driven Holder

Boring Holder

Socket

ITEM E200MA E200MC

4 4

1 1

3 3

- -

- -

1 1

1 1

1 1

1 1

1 1

1 1

1 1

- -

- -

Opt Opt

Tooling�Parts�Detail


unit : mm(in)Interference

ø160

(ø6.

3) ø95

(ø3.

7) ø155

(ø6.1)

ø155

(ø6.1)

ø97(ø3.8)

ø150 (ø5.9)

ø142(ø5.6)ø95(ø3.82)

ø520

(ø20.5)ø579

(ø22.8)

ø165(ø6.5)ø210(ø8.27)

ø32

(ø1.26)ø40

(ø1.57)ø3

50(ø

13.8)

E200A/PAE200C/PC

E200MAE200MC

22+

23

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

unit : mm(in)Tooling�Travel�Range

SPECIFICATIONS

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)

330 (13) (Max. Turning Length)

80 (3.1)

93(3.6)

Ø32

(Ø1.

3)

80 (3.1)

104

(4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210

(8.2

) (X

-axi

s st

.)

112(4.4)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

Ø21

0 (8

")

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114 (4.5)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124

(4.9

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210

(8.2

) (X

-axi

s st

.)

76 286(11.2) (Z-axis st.)

437(17.2) (Spindle-Disk)

Ø16

9(6"

)

65(2

.7)

145(

5.7)

210

(8.2

) (X

-axi

s st

.)

91(3.6) 286(11.2) (Z-axis st.)

286(11.2)(Max. Turning Length)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0 (8

.2) (

X-a

xis

st.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0 (8

.2) (

X-a

xis

st.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210

(8.2

) (X

-axi

s st

.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0 (8

.2) (

X-a

xis

st.)

112(4.4)

458(18) (Spindle-Disk)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)

458(18) (spindle-disk)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

5(0

.2)

205

(8.1

)

210

(8.2

) (X

-axi

s st

.)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

5 (8

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

29 (1.1

)18

1 (7

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

51 (2)

159

(6.3

)21

0 (8

.2) (

X-a

xis

st.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)

Face Tool holder Face Tool holder

Tail Stock Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)

(Quill st.) (Tail Stock st.)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

88 (3.4) 80 (3.1) 160 (6.3) 120.8 (4.7)(Quill st.) (Tail Stock st.)


Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80 (3.1) 160 (6.3) 120.8 (4.7)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


428 (16.8) (Spindle-Disk)408 (16) (PA)

330(13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

93(3.6)

Ø32

(1.3

)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449 (17.6) (Spindle-Disk)429 (16.8) (PC)

330 (13) (Z-axis st.)310(12.2) (PC)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)

O.D. Tool holder

I.D. Tool holder I.D. Tool holder (with Tail Stock)

O.D. Tool holder (with Tail Stock)

Tail Stock


I.D. Tool holder (with Tail Stock)

O.D. Tool holder

I.D. Tool holder

O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)

Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)

E200A/PA

E200C/PC

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


80 (3.1)

93(3.6)

Ø32

(Ø1.

3)

80 (3.1)

104

(4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210

(8.2

) (X

-axi

s st

.)

112(4.4)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

Ø21

0 (8

")

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114 (4.5)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124

(4.9

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210

(8.2

) (X

-axi

s st

.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210

(8.2

) (X

-axi

s st

.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0 (8

.2) (

X-a

xis

st.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0 (8

.2) (

X-a

xis

st.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210

(8.2

) (X

-axi

s st

.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0 (8

.2) (

X-a

xis

st.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

5(0

.2)

205

(8.1

)

210

(8.2

) (X

-axi

s st

.)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

5 (8

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

29 (1.1

)18

1 (7

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

51 (2)

159

(6.3

)21

0 (8

.2) (

X-a

xis

st.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)



Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80 (3.1) 160 (6.3) 120.8 (4.7)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


428 (16.8) (Spindle-Disk)408 (16) (PA)

330(13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

93(3.6)

Ø32

(1.3

)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449 (17.6) (Spindle-Disk)429 (16.8) (PC)

330 (13) (Z-axis st.)310(12.2) (PC)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)

O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder




SPECIFICATIONS

24+

25

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


80 (3.1)

93(3.6)

Ø32

(Ø1.

3)

80 (3.1)

104

(4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210

(8.2

) (X

-axi

s st

.)

112(4.4)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

Ø21

0 (8

")

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114 (4.5)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124

(4.9

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210

(8.2

) (X

-axi

s st

.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210

(8.2

) (X

-axi

s st

.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0 (8

.2) (

X-a

xis

st.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0 (8

.2) (

X-a

xis

st.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210

(8.2

) (X

-axi

s st

.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0 (8

.2) (

X-a

xis

st.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

5(0

.2)

205

(8.1

)

210

(8.2

) (X

-axi

s st

.)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

5 (8

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

29 (1.1

)18

1 (7

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

51 (2)

159

(6.3

)21

0 (8

.2) (

X-a

xis

st.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)



Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80 (3.1) 160 (6.3) 120.8 (4.7)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


428 (16.8) (Spindle-Disk)408 (16) (PA)

330(13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

93(3.6)

Ø32

(1.3

)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449 (17.6) (Spindle-Disk)429 (16.8) (PC)

330 (13) (Z-axis st.)310(12.2) (PC)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)

O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder



E200MA


SPECIFICATIONS

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


80 (3.1)

93(3.6)

Ø32

(Ø1.

3)

80 (3.1)

104

(4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210

(8.2

) (X

-axi

s st

.)

112(4.4)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

Ø21

0 (8

")

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114 (4.5)

53 (2.1

)15

7 (6

.2)

210

(8.2

) (X

-axi

s st

.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124

(4.9

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210

(8.2

) (X

-axi

s st

.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210

(8.2

) (X

-axi

s st

.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0 (8

.2) (

X-a

xis

st.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0 (8

.2) (

X-a

xis

st.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210

(8.2

) (X

-axi

s st

.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0 (8

.2) (

X-a

xis

st.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

5(0

.2)

205

(8.1

)

210

(8.2

) (X

-axi

s st

.)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

5 (8

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

29 (1.1

)18

1 (7

.1)

210

(8.2

) (X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

51 (2)

159

(6.3

)21

0 (8

.2) (

X-a

xis

st.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)



Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80 (3.1) 160 (6.3) 120.8 (4.7)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9 (6

")

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

91(3.6)


428 (16.8) (Spindle-Disk)408 (16) (PA)

330(13) (Z-axis st.)310 (12.2) (PA)

310 (12.2) (PA)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0 (7

.5)

210

(8.2

) (X

-axi

s st

.)

93(3.6)

Ø32

(1.3

)

428 (16.8) (Spindle-Disk)408 (16) (PA)

330 (13) (Z-axis st.)310 (12.2) (PA)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449 (17.6) (Spindle-Disk)429 (16.8) (PC)

330 (13) (Z-axis st.)310(12.2) (PC)

Ø21

0 (8

")

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (Spindle-Disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)

O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder



E200MC


SPECIFICATIONS

26+

27

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Traverse Rate (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Torque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

CAPACITY

FEED

TANkCAPACITY

SPINDlE

TURRET

lIvE TOOl

TAIlSTOCk

MACHINE

NC

POWERSUPPlY

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m(lbf.ft)

-

-

deg

mm(in)

m/min(ipm)

-

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m(lbf.ft)

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gal)

ℓ(gal)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-


ITEM E200MAE200A E200PA

Ø550 (21.7″)

Ø350 (13.8″)

Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)

300 (11.8″) 255 (10″) 280 (11″)

Ø45 (1.8″)

Ø169 (6.7″)

Ø53 (2.1″)

6,000 [6,000] 6,000 6,000 [6,000]

15/11(20/15) 15/11 (20/15)

15/11(20/15)

[10.8/9(14.4/12)] [10.8/9(14.4/12)]

95.6/52.5 (70.5/38.7) 95.5/52.5(70.5/38.7)

95.5/52.5 (70.5/38.7)

[75.6/68.7(55.7/50.6)] [75.6/68.7(55.7/50.6)]

BELT

A2-5

- 0.001˚ -

210/330 (8.3″/13″) 210/286 (8.3″/11.3″) 210/310 (8.3″/12.2″)

36/36 (1,417/1,417) 24/24 {945/945)

LM GUIDE BOX GUIDE

12

□25 (1″) □20 (0.8″) □25 (1″)

Ø32 (1.3″)

0.12 0.23 0.12

- 8.8/3 (11.8/4) -

- 4,500 -

- 45/20 (33.2/15) -

- Ø16 (0.6″) ER25 -

- VDI30 -

MT4

Ø65 (2.6″)

80 (3.1″)

160 (6.3″)

135 (35.7)

1.8 (0.5)

17

OVER 16

220/60 (200/50)

2,020×1,763 (79.5″×69.4″)

1,820 (71.7″)

3,800 (8,378)

HYUNDAI WIA FANUC i Series [E200A/PA : HYUNDAI-iTROL]

Specifications [ ] : Option

SPECIFICATIONS


Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Traverse Rate (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Torque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

CAPACITY

FEED

TANkCAPACITY

SPINDlE

TURRET

lIvE TOOl

TAIlSTOCk

MACHINE

NC

POWERSUPPlY

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m(lbf.ft)

-

-

deg

mm(in)

m/min(ipm)

-

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m(lbf.ft)

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gal)

ℓ(gal)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

ITEM E200MCE200C E200PC

Ø550 (21.7″)

Ø350 (13.8″)

Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)

270 (10.6″) 255 (10″) 270 (10.6″)

Ø65 (2.6″)

Ø210 (8.3″)

Ø78 (3.1″)

4,000 [4,000] [4,000] 4,000 4,000 [4,000]

15/11 (20/15) 15/11 (20/15)

[18.5/15 (24.8/20] 15/11 (20/15) [10.8/9(14.4/12)]

[10.8/9(14.4/12)]

167/92 (123.1/67.8) 167/92 (123.1/67.8)

[206/167 (152/123.2)] 167/92 (123.1/67.8) [132.3/110.3(97.5/81.3)]

[132.3/110.3(97.5/81.3)]

BELT

A2-6

- 0.001˚ -

210/330 (8.3″/13″) 210/286 (8.3″/11.3″) 210/310 (8.3″/12.2″)

36/36 (1,417/1,417) 24/24 {945/945)

LM GUIDE BOX GUIDE

12

□25 (1″) □20 (0.8″) □25 (1″)

Ø40 (1.6″) Ø32 (1.3″) Ø40 (1.6″)

0.12 0.23 0.12

- 8.8/3 (11.8/4) -

- 4,500 -

- 45/20 (33.2/15) -

- Ø16 (0.6″) ER25 -

- VDI30 -

MT4

Ø65 (2.6″)

80 (3.1″)

160 (6.3″)

135 (35.7)

1.8 (0.5)

17

OVER 16

220/60 (200/50)

2,050×1,763 (80.7″×69.4″)

1,820 (71.7″)

3,900 (8,598)

HYUNDAI WIA FANUC i Series [E200C/PC : HYUNDAI-iTROL]

Specifications [ ] : Option

SPECIFICATIONS

28+

29

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.

CONTROLLER

HYUNDAI-iTROL�(E200A/PA�|�E200C/PC)Control & Composition Number of axis/SpindlesNumber of axis/Spindles, max.Color displayKeyboardPart programAddition of part program on CF cardTransfer FunctionFeedrate overrideTransfer value input rangeUnlimited rotation of rotation axisAcc./Dec. with jerk limitationMeasuring systems 1 and 2, selectableTravel to fixed stopAuto Servo Tuning (AST)Spindle FunctionSpindle overrideSpindle speed, max. programmable value rangeAutomatic gear stage selectionSpindle orientationSpindle speed limitationRigid tappingSpindle control with PLCInterpolationLinear interpolation axis, max.Circle via center point and end pointCircle via interpolation pointHelical interpolationNon-uniform rational B splinesContinuous - path mode with programmable rounding clearanceProgram FunctionSubroutine levels, max.Interrupt routines, max.Number of levels for skip blocksPolar CoordinatesDimensions inch/metric, changeover manually or via programDynamic preprocessing memory FIFOLook aheadAbsolute/Incremental commandScaling/RotationRead/Write system variablesBlock searchEdit backgroundProcessing program number, max.Using of CF Card, USBBasic coordinate number, max.Work coordinate number, max.Basic/Work coordinate programming changeScratching functionGlobal and Local user data (GUD/LUD)Global program user dataInteractive cycle programTool FunctionTool radius compensationsTool offset selection via T/D numbersTools / Cutting edges in tool listMonitoring FunctionWorking area limitSoftware and Hardware limitZero-speed/Clamping monitoring2D/3D protection zonesContour monitoringCompensationBacklash compensationLeadscrew error compensationMeasuring system error compensationFeedforward control (Speed control)

2 axes (X, Z) / 3 axes (X, Z, C) 8 axes (Axis + Spindle) TFT 10.4" Color (800 x 600) QWERTY Full Keyboard 1MB, 3MB, 5MB

0% ~ 200% ± 999999999

0% ~ 150% 1000000 ~ 0.0001

4 axes

7 2 2

1 G90 / G91

750

1 100

128 / 256, 256 / 512

Safety FunctionSafe torque off (STO)Safe brake control (SBC)Safe stop 1 (SS1)Diagnostic FunctionAlarm/Message , Alarm logPLC status/LAD online displayPLC remote connection (Ethernet)Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support FunctionActual velocity displayTool life managementWork counter/Cycle time2D simulationManual OperationManual handle/Jog transferManual measurement of workpiece / tool offsetAutomatic tool/Workpiece measurementAutomatic/Program reference approachAutomatic OperationProgram run as using CF card/USBProgram control/modificationBlock searchRepositionPreset (Set actual value)Data TransmissionEthernet networkUSB memory stick & CF cardConvenience FunctionProcessing setting(Coordinate system setting, TMS)Processing support(Tool Monitoring, Spindle overload monitoring)Maintenance(Turret Guidance, I/O monitoring, Manual)Management (Soft MCP, M/G code List)SMART machiningEnergy saving function (ECO)Machine Monitoring System (MMS Lite)languageStandard support language

OptionMaximum skip block numberDRF offsetMDI program save/loadTeach-In mode3D simulation(Except for working area/Collision check)Real time simulationInteractive program (Shop Turn)Spline interpolationProgram remote control in network

Language

As time / As amount Embedded

Chinese Simplified, English, Korean

10

Chinese Traditional, French, German,Italian, Portuguese, Spanish

HYUNDAI�WIA�FANUC�i�SeriesControl function / Screen display

Control axis number

Simultaneous control axis number

Min. input unit

Min. increment

High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub off

Backlash compensation

Position switchFault load detectionHigh resolution transfer control(HRM) LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, Transfer/rpmProgram input and interpolation function

Nano interpolation

Dwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycle

Max. 4 axesX, Z axisX, Z, C axis (M type machine)2 axes/straight, arc interpolation (Max. 4 axes)X, Z axis : 0.001 mm (0.0001″)C axis : 0.001 degX, Z axis : 0.001 mm (0.0001″)C axis: 0.001 deg

G20 / G21Each axes / All axesFull axes

Over-travel

+/- 0~9999 Pulse(Rapid traverse & cutting feed)

Back spin torque limiter (BST)

8.4″ Color LCD

Sequence, Program

Dry run, Program check

Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25/F50, F100%

Positioning/Straight/Arc(G00/G01/G02/G03)G04, 0~9999.9999 sec

G28, ManualG27G30M00, M01 / M02, M30EIA / ISO1 EA+/- 9999.9999”O+4 digit number

G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`A/B/CG1010 Steps

#100 to #199, #500 to #999

Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableControlling live tool by servo motor

OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnData serverPolygon turningHelical interpolationDynamic graphic display8 level data protection functionManual guide i

Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.

M4 digit number

S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)

T2 + 264 pairs

G40, G41, G42

RS232C, Memory Card

1280m/512kbMax. 500 programs

NC program copy, move, change

Alarm and handling screen

Rod meter light

Selection of random 5 EAScreen saver

Turn millTurn millTurn millTurn millTurn millTurn millTurn mill

100 Mbps (Option board is required)9 EA

1GB

Interactive program (10.4″ Color LCD)

30+

31

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

CONTROLLER

GLOBAL�NETWORk

32+

33

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804

HEADQUARTER

OVERSEAS OFFICESHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143

TEL : +1 201 489 2887 FAX : +1 201 489 2723

Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China

TEL : +86 512 5672 6808FAX : +86 512 5671 6960

Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041

TEL : +86 28 8665 5550FAX : +86 28 8666 2985

HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, D-63067 Offenbach, Germany

TEL : +49 69271 472 701FAX : +49 69271 472 719

Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233

TEL : +86 21 6427 9885FAX : +86 21 3431 0376

Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056

TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258

Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany

TEL : +49 6142 9256 0 FAX : +49 6142 834 100

Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176

TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853

Qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061

TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338

Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719

Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400

TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597

Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013

TEL : +86 24 3228 6640FAX : +86 24 3228 6642

2015-12 003.002 ENG

Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do

Tel +82 55 280 9206, 9299 Fax +82 55 210 9804

machine.hyundai-wia.com

Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do

Tel +82 31 593 8173

E200C MovieE200A Movie

Documents

E200 Series - Müggler Engineering