E200 SeriesHYUNDAI WIA CNC Turning Center
The CNC Turning Center E200 Series , designed by Hyundai WIA with years of expertise and the latest technology, is designed to maximize productivity by enhancing both technical performance and economic efficiency.
Technical Leader
6″ 8″ LM Box Standard TurnMill
Chuck Guideway Turret
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
MODEL
E200A
E200C
E200�MA
E200MC
E200PA
E200PC
High Speed, Rigidity and ProductivityEconomical CNC Turning Center for next generation
E200 Series● 45° slanted one-piece bed structure with high rigidity
● Stabilized unit structure to minimize thermal displacement
● High productivity achieved with its mechanism
● Unbeatable rapid traverse rate : 36m/min {1,417ipm} (E200A/MA/C/MC)
● The most reliable high speed servo turret : 0.1sec/step
● Application of boxguideways for heavy duty cutting (E200PA/PC)
● Compact design suitable for installation in restricted space.
● Ergonomic design for convenient access to chuck and tool
01 Basic FeaturesThe Best Productivity 6 inch / 8 inch Compact CNC Turning CenterE200 Series
Main�SpindleHeat produced by the main spindle is blocked by applying a symmetric one-piece base and an insulation plate. This enables maintenance of high accuracy even during a long period of machining.
TurretThe turret is driven by a servo motor at a remarkably high speed indexing time of 0.12sec/step. Cycle time is reduced and productivity is improved.
Ball�ScrewIn order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews.
High�Precision,�High�Rigidity�One-piece�StructureThe E200 Series is designed with a 45 degree slanted bed combined with square type and tube type rib structure. This special design enhances rigidity and vibration absorbing capability, allowing powerful cutting with high precision.
01
04
0302
LM�Guideway(E200A/MA/C/MC)
Box�Guideway(E200PA/PC)
GuidewayE200A/C is designed with LM Guideways for all axes for better speed and response.
LM Guideway reduces non-cutting time and achieves a rapid traverse rate of 36m/min, which increases productivity.
E200PA/PC is designed with box guideways for all axes for stable heavy duty cutting.
◉�Rapid�Traverse�Rate�(X/Z axis)
E200A | E200C | E200MA | E200MC : 36/36 m/min (1,417/1,417 ipm)
E200PA | E200PC : 24/24 m/min (945/945 ipm)
◉�Travel(X/Z axis)
E200A | E200C : 210/330mm (8.3″/13″) E200MA | E200MC : 210/286mm (8.3″/11.3″) E200PA | E200PC : 210/310mm (8.3″/12.2″)
Reductionofnon-cuttingtimebytraverserate
04+
05
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Basic Features
01
02
04
03
02 High Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterE200 Series
Main�SpindleThe spindle has a wide span of nominal production. The spindle structure is designed to minimize thermal displacement and perform high precision cutting during high speed and repeated cutting. By enlarging the spindle diameter and thickness, its rigidity is increased. Especially, high precision angular ball bearing designed spindle reduces noise and increases accuracy.
Tail�StockIt is possible to process with stability by adopting 80mm(3.1″) movable tailstock as an option
Taper : MT4Quill Dia. : Ø65 (Ø2.5″)Travel : 80 mm (3.1″)
0.001° C-Axis�ControlC-axis with BZ-Sensor performs 0.001°(Command) split angle and position control in order to process various products. (E200MA/MC)
Spindle
06+
07
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
15kW [20HP] (15min)
Spindle Speed (r/min)
Spindle Speed (r/min)
95.5N∙m [70.4lbf∙ft] (15min)95.5[70.4]
15[20]
11[14.7]
15[20]
11[14.7]
15[20]
167[123]
92[67.8]
52.5[38.7]
52.5N∙m [38.7lbf∙ft](Cont.)
70N∙m [51.6lbf∙ft](60min)11kW [14.7HP] (60min, Cont.)
6,000
1,143 2,570
2,000 3,0001,500
15kW [20HP] (30min)
E200C/MC/PC
167N∙m [123lbf∙ft] (30min)
Power(kW[HP]) Torque(N∙m[lbf∙ft])
E200A/MA/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])
92N∙m [67.8lbf∙ft](Cont.)
11kW [14.7HP] (Cont.)
Spindle Speed (r/min)
75.6[55.7]
10.8[14.5]
9[12] 68.7
[50.6]
1,500500 4,500 6,000
E200A/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])
10.8kW [14.5HP] (S6 60%)
9kW [12HP] (Cont.)75.6N∙m [55.7lbf∙ft] (S6 60%)
68.7N∙m [50.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
132.3[97.6]10.8
[14.5]
9[12]
110.3[81.4]
857286 2,571 4,000
E200C/PCPower(kW[HP]) Torque(N∙m[lbf∙ft])
10.8kW [14.5HP] (S6 60%)
9kW [12HP] (Cont.)
132.3N∙m [97.6lbf∙ft] (S6 60%)
110.3N∙m [81.4lbf∙ft] (Cont.)
Spindle Speed (r/min)
167[123]
206[152]
18.5[24.8]
2,000
18.5kW [24.8HP] (30min)
E200C
206N∙m [152lbf∙ft] (30min)
Power(kW[HP]) Torque(N∙m[lbf∙ft])
167N∙m [123lbf∙ft](Cont.)15kW [20HP] (Cont.)
15kW [20HP] (15min)
Spindle Speed (r/min)
Spindle Speed (r/min)
95.5N∙m [70.4lbf∙ft] (15min)95.5[70.4]
15[20]
11[14.7]
15[20]
11[14.7]
15[20]
167[123]
92[67.8]
52.5[38.7]
52.5N∙m [38.7lbf∙ft](Cont.)
70N∙m [51.6lbf∙ft](60min)11kW [14.7HP] (60min, Cont.)
6,000
1,143 2,570
2,000 3,0001,500
15kW [20HP] (30min)
E200C/MC/PC
167N∙m [123lbf∙ft] (30min)
Power(kW[HP]) Torque(N∙m[lbf∙ft])
E200A/MA/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])
92N∙m [67.8lbf∙ft](Cont.)
11kW [14.7HP] (Cont.)
Spindle Speed (r/min)
75.6[55.7]
10.8[14.5]
9[12] 68.7
[50.6]
1,500500 4,500 6,000
E200A/PAPower(kW[HP]) Torque(N∙m[lbf∙ft])
10.8kW [14.5HP] (S6 60%)
9kW [12HP] (Cont.)75.6N∙m [55.7lbf∙ft] (S6 60%)
68.7N∙m [50.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
132.3[97.6]10.8
[14.5]
9[12]
110.3[81.4]
857286 2,571 4,000
E200C/PCPower(kW[HP]) Torque(N∙m[lbf∙ft])
10.8kW [14.5HP] (S6 60%)
9kW [12HP] (Cont.)
132.3N∙m [97.6lbf∙ft] (S6 60%)
110.3N∙m [81.4lbf∙ft] (Cont.)
Spindle Speed (r/min)
167[123]
206[152]
18.5[24.8]
2,000
18.5kW [24.8HP] (30min)
E200C
206N∙m [152lbf∙ft] (30min)
Power(kW[HP]) Torque(N∙m[lbf∙ft])
167N∙m [123lbf∙ft](Cont.)15kW [20HP] (Cont.)
FANUCSIEMENS1PH8ServoMotor
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret E200 Series
TurretThe E200 Series has a high performance AC servo motor and 3-piece coupling attached to the turret which enhances its process reliability. Powerful hydraulic tool clamping minimizes tool tip deviation which happens due to the load during heavy duty cutting.
◉�Number of Tools : 12EA
◉�Tool Size (O.D/I.D)
□25/Ø32 (□1″/Ø1.3″)
◉�Indexing Time�:0.12sec/step
◉�Number of Tools : 12EA
◉�Tool Size (O.D/I.D)
□25/Ø40 (□1″/Ø1.6″)
◉�Indexing Time�:0.12sec/step
E200A�|�PA
E200C�|�PC
◉�Number of Tools : 12EA
◉�Tool Size (O.D/I.D) □20/Ø32 (□0.8″/Ø1.3″)
◉�Indexing Time�:0.23sec/step
E200MA�|�MC
08+
09
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Turret
Mill�Tool�HolderStraight Milling Head and Angular Milling Head live tools can be utilized to cut sides and inner diameters of workpieces. Also, Drill, Tap, Endmill and many more tools can be utilized to enhance productivity and efficiency.
VDI type turret enables reduction of tool change time and brings convenience to workers when changing tools.
◉ Output (Max./Cont.) : 8.8/3 kW (11.8/4 HP)
◉ Speed : 4,500rpm
◉ Collet size :Ø16 (Ø0.6″) (ER25)◉ Type :VDI30
Mill�Turret�(VDI)
U-Drill
Collet�&�Cap
Endmill
Endmill
Drill
Tap
Drill
Tap
Face�Cutter
Angular Milling HeadStraight Milling Head
04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterE200 Series
10+
11
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Machining
O.D Cutting
Face Cutting
Drilling
End Milling
I.D Cutting
O.D Hole Drilling
I.D Threading
Ball-End Milling
❖ The above results might be different by types of processing circumstance.
Machining�Variation
Sample Workpiece
E200A
Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge
Ø42(Ø1.65″)4 mm (0.157″)198 m/min (7,795ipm)1,500 r/min0.45 mm/rev (0.17 ″/rev)356 cc/min
Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
Ø70(Ø2.75″)Ø37 (Ø1.45″)104 m/min (4,094ipm)895 r/min0.4 mm/rev (Ø0.15″/rev)385 cc/min
DrillingCutting (O.D)
E200MA
Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
15 mm (0.59″)Ø12(Ø0.47″)36 m/min (1.417ipm)960 r/min0.5 mm/rev (Ø0.02″/rev)17 cc/min
Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed
20 mm (0.79″)M12/1.758 m/min (315ipm)212 r/min1.75 mm/rev (0.07″/rev)
Drilling Tapping
Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
15 mm (0.59″)Ø12(Ø0.47″)162 m/min (6,378ipm)995 r/min0.4 mm/rev (Ø0.15″/rev)180 cc/min
Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed
20 mm (0.79″)M12/1.758 m/min (315ipm)121 r/min1.75 mm/rev (0.07″/rev)
X-Axis Drilling Tapping
Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge
Ø42(Ø1.65″)4 mm (0.157″)198 m/min (7,795ipm)1,500 r/min0.45 mm/rev (0.17 ″/rev)356 cc/min
Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
Ø50(Ø1.97″)Ø22(Ø0.87″)28 m/min (866ipm)400 r/min0.4 mm/rev (Ø0.15″/rev)61 cc/min
DrillingCutting (O.D)
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
〈Material〈JIS〉:S45C(Carbon steel〉
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
〈Material〈JIS〉:S45C(Carbon steel〉
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
05 Smart SystemSoftware for smart operating and machiningE200 Series
HYUNDAI WIA Smart System
for CNC
Turning Center
Monitoring Functions Energy Saving
Easy Programming
HW-MMS | HW-TMHW-ESS
HW-DPRO T/TM | HW-eDNC
User Friendly
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
USB�Port�(Standard)Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
12+
13
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
HW-TM(HYUNDAIWIA–ToolMonitoring)
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
HW-DPRO�T/TM(HYUNDAIWIA–DialoguePROgramTurn/TurnMill)
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMS(HYUNDAIWIA–MachineMonitoringSystem)
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
HW-eDNC(HYUNDAIWIA–EthernetDirectNumericalControl)
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-ESS(HYUNDAIWIA–EnergySavingSystem)
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
HYUNDAI WIA Smart System
HYUNDAI-iTROLThe Powerful CNC platform for Machine Tools 06E200 Series
HYUNDAI�Intelligent�ControlConvenientandEasy-to-UseMachineTool...
Hyundai WIA take operator convenience to a higher level with the new controller, HYUNDAI-iTROL. Experience the new operating environment with HYUNDAI-iTROL.
14+
15
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
When power is on, HYUNDAI-iTROL gives the worker instructions to do warm-up.HYUNDAI-iTROL also informs the worker of machine problems beforehand by showing current machine status.
Smart System operation preperation
The three essential operations for machining are program check, tool measurement and coordinates system setup. HYUNDAI-iTROL provides three operations in consecutive order to prevent error and to enable quick and easy setup.
Quick & Easy Machining Support
Tool and spindle monitoring can be easily done with a simple operation. This helps with tool management, spindle protection and factory automation.
Tool & Spindle Monitoring
Easy input/output of programs is possible with the use of USB memory card, CF memory card and LAN.
COMMUNICATION FUNCTION
RJ 45 Ethernet
USB 2.0
Compact Flash Card
You can use energy saving function (ECO) and machining optimization function (SMART) with the MCP button.
iTROL TechnologyiTROL Convenient Function
Dynamicservocontrol,highlyefficientSiemensservodriveandSiemensservomotorwithdurabilityandquickresponsehavebeenapplied.
Controller
07 User ConvenienceVarious Devices for User Convenience
E200 Series
Parts�ConveyorThe parts conveyor transfers the finished workpiece unloaded by the parts catcher for user convenience.
Long Type 3m (118.1″)Max load processing capa. Ø42 (1.7″)Shot Type 1.5m (59.1″)Max load processing capa. Ø65 (2.6″)
Bar Feeder System
Bar�Feeder��Bar feeder system enables automation which leads to efficiency improvement.
RoundBarMaterial
Bar�Feeder Machining Parts�Catcher Parts�Conveyor
Bar�Feeder�Machining�Process
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Optional
16+
17
Gantry Loader System
Raw�Material In�Work�Stocker 1st�Machining
End�Product Out�Work�Stocker 2nd�Machining
The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables machining process flexibility and productivity enhancement.
Gantry�Loader�Machining�Process�
Turn�Over
Standard�&�Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexC-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceDoor Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque Limiter
6″8″6″8″
AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
0.4Bar (5.8 psi)6Bar (87 psi)
135ℓ(35.7 gal)Front (Rear)Front (Right)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
E200A/PA E200MA ● ● ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ○(CE:●) ○(CE:●) ○ ○ ● ● - ● - ● - ● - ☆ - ☆ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆ ● ● ● ● ○(CE:●) ○(CE:●) ● ● ○ ○
E200A/PA E200MA ● ● ○ ○ ○ ○ ○ ○ - -
○ ○
● -
○ ○
● -
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ●
● ●
☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG
Spindle Load Meter(LED Type)
Spindle Speed Meter(LED Type)
Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)DigitalDigitalDigital6ea9ea
FANUCHYUNDAI-iTROL
20kVA
TACOSMC
X axisZ axis
FANUCHYUNDAI-iTROL
16Contact32ContactMain SP.
Hollow35bar (507.6 psi)/ 11ℓ (2gal)
Need Munsel No.
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
Standard�&�Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexC-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceDoor Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque Limiter
6″8″6″8″
AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
0.4Bar (5.8 psi)6Bar (87 psi)
135ℓ(35.7 gal)Front (Rear)Front (Right)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ○(CE:●) ○(CE:●) ○ ○ ● ● - ● - ● - ● - ○ - ○ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆ ● ● ● ● ○(CE:●) ○(CE:●) ● ● ○ ○
E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ - -
○ ○
● -
○ ○
● -
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ●
● ●
☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG
Spindle Load Meter(LED Type)
Spindle Speed Meter(LED Type)
Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)FANUC(Mounted Type)HYUNDAI-iTROL(Built-in Type)DigitalDigitalDigital6ea9ea
FANUCHYUNDAI-iTROL
20kVA
TACOSMC
X axisZ axis
FANUCHYUNDAI-iTROL
16Contact32ContactMain SP.
Hollow35bar (507.6 psi)/ 11ℓ (2gal)
Need Munsel No.
Specifications are subject to change without notice for improvement.
18+
19
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)External�Dimensions
SPECIFICATIONS
1443(56.8)577(22.7)
2020(79.5) 2050(80.7) 1260(49.6) 1230(48.4)
3280(129.1)
380(
14.9
)12
70(5
0)
2150
(84.
6)
500
R500
1000(39.3)
SPINDLE CENTER
1100(43.3)550(21.6)
1650(65)910(35.8)
2560(100.7)
10 (0.4
)66
5((2
6.2)
335
(13.
2)10
35(4
0.7)
110
(4.3
)11
45(4
5)67
5(26
.5)
1820
(71.
6)
380(14.9)
SPLINDLE CENTER
950(
37.4
)27
5(1
0.8)
192
(7.5
)12
24(4
8.1)
1416
(55.
7)
950(
37.4
)27
5(1
0.8)
192
(7.5
)12
24(4
8.1)
1416
(55.
7)
538(21.2)8(0.3)
920(36.2)933(36.7)
Ø16
9(6.
6)Ø
210(
8.2)
E200A/MA/PA E200C/MC/PC
12 Stations
VDI 3012 Stations
O.D Holder
I.D Holder
Boring BarSocket
Facing Holder
Face & I.DTool
Boring Bar
Drill
Boring BarBoring Bar
Socket
U-Drill Socket U-Drill Holder
Boring BarHolder Pice
Facing Holder
Face & I.D Tool
Boring BarØ32
Drill
U-Drill
Tap
End Mill
StraightMill Holder
Milling Collet
Tapping Collet
AngularMill Holder
Plug
unit : mm(in)Tooling�System
20+
21
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
E200A/PAE200C/PC
Right/Left
Single
Ø32 (1.25″)
Ø40 (1.57″)
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Dril Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM E200A/PA E200C/PC
- -
1 1
5 5
Opt -
- Opt
- -
- -
- -
1 1
1 1
1 1
1 1
1 1
1 1
- -
Tooling�Parts�Detail
Specifications are subject to change without notice for improvement.
unit : mm(in)Tooling�System
SPECIFICATIONS
12 Stations
VDI 3012 Stations
O.D Holder
I.D Holder
Boring BarSocket
Facing Holder
Face & I.DTool
Boring Bar
Drill
Boring BarBoring Bar
Socket
U-Drill Socket U-Drill Holder
Boring BarHolder Pice
Facing Holder
Face & I.D Tool
Boring BarØ32
Drill
U-Drill
Tap
End Mill
StraightMill Holder
Milling Collet
Tapping Collet
AngularMill Holder
Plug
E200MAE200MC
Right/Left
Single
Ø32 (1.25″)
Ø40 (1.57″)
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Dril Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM E200MA E200MC
4 4
1 1
3 3
- -
- -
1 1
1 1
1 1
1 1
1 1
1 1
1 1
- -
- -
Opt Opt
Tooling�Parts�Detail
Specifications are subject to change without notice for improvement.
unit : mm(in)Interference
ø160
(ø6.
3) ø95
(ø3.
7) ø155
(ø6.1)
ø155
(ø6.1)
ø97(ø3.8)
ø150 (ø5.9)
ø142(ø5.6)ø95(ø3.82)
ø520
(ø20.5)ø579
(ø22.8)
ø165(ø6.5)ø210(ø8.27)
ø32
(ø1.26)ø40
(ø1.57)ø3
50(ø
13.8)
E200A/PAE200C/PC
E200MAE200MC
22+
23
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling�Travel�Range
SPECIFICATIONS
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
80 (3.1)
93(3.6)
Ø32
(Ø1.
3)
80 (3.1)
104
(4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210
(8.2
) (X
-axi
s st
.)
112(4.4)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
Ø21
0 (8
")
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114 (4.5)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124
(4.9
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210
(8.2
) (X
-axi
s st
.)
76 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210
(8.2
) (X
-axi
s st
.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0 (8
.2) (
X-a
xis
st.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0 (8
.2) (
X-a
xis
st.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210
(8.2
) (X
-axi
s st
.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0 (8
.2) (
X-a
xis
st.)
112(4.4)
458(18) (Spindle-Disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
5(0
.2)
205
(8.1
)
210
(8.2
) (X
-axi
s st
.)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
5 (8
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
29 (1.1
)18
1 (7
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
51 (2)
159
(6.3
)21
0 (8
.2) (
X-a
xis
st.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88 (3.4) 80 (3.1) 160 (6.3) 120.8 (4.7)(Quill st.) (Tail Stock st.)
(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80 (3.1) 160 (6.3) 120.8 (4.7)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330(13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
93(3.6)
Ø32
(1.3
)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449 (17.6) (Spindle-Disk)429 (16.8) (PC)
330 (13) (Z-axis st.)310(12.2) (PC)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200A/PA
E200C/PC
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
80 (3.1)
93(3.6)
Ø32
(Ø1.
3)
80 (3.1)
104
(4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210
(8.2
) (X
-axi
s st
.)
112(4.4)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
Ø21
0 (8
")
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114 (4.5)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124
(4.9
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210
(8.2
) (X
-axi
s st
.)
76 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210
(8.2
) (X
-axi
s st
.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0 (8
.2) (
X-a
xis
st.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0 (8
.2) (
X-a
xis
st.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210
(8.2
) (X
-axi
s st
.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0 (8
.2) (
X-a
xis
st.)
112(4.4)
458(18) (Spindle-Disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
5(0
.2)
205
(8.1
)
210
(8.2
) (X
-axi
s st
.)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
5 (8
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
29 (1.1
)18
1 (7
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
51 (2)
159
(6.3
)21
0 (8
.2) (
X-a
xis
st.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88 (3.4) 80 (3.1) 160 (6.3) 120.8 (4.7)(Quill st.) (Tail Stock st.)
(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80 (3.1) 160 (6.3) 120.8 (4.7)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330(13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
93(3.6)
Ø32
(1.3
)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449 (17.6) (Spindle-Disk)429 (16.8) (PC)
330 (13) (Z-axis st.)310(12.2) (PC)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
unit : mm(in)Tooling�Travel�Range
SPECIFICATIONS
24+
25
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
80 (3.1)
93(3.6)
Ø32
(Ø1.
3)
80 (3.1)
104
(4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210
(8.2
) (X
-axi
s st
.)
112(4.4)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
Ø21
0 (8
")
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114 (4.5)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124
(4.9
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210
(8.2
) (X
-axi
s st
.)
76 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210
(8.2
) (X
-axi
s st
.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0 (8
.2) (
X-a
xis
st.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0 (8
.2) (
X-a
xis
st.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210
(8.2
) (X
-axi
s st
.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0 (8
.2) (
X-a
xis
st.)
112(4.4)
458(18) (Spindle-Disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
5(0
.2)
205
(8.1
)
210
(8.2
) (X
-axi
s st
.)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
5 (8
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
29 (1.1
)18
1 (7
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
51 (2)
159
(6.3
)21
0 (8
.2) (
X-a
xis
st.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88 (3.4) 80 (3.1) 160 (6.3) 120.8 (4.7)(Quill st.) (Tail Stock st.)
(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80 (3.1) 160 (6.3) 120.8 (4.7)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330(13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
93(3.6)
Ø32
(1.3
)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449 (17.6) (Spindle-Disk)429 (16.8) (PC)
330 (13) (Z-axis st.)310(12.2) (PC)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200MA
unit : mm(in)Tooling�Travel�Range
SPECIFICATIONS
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
80 (3.1)
93(3.6)
Ø32
(Ø1.
3)
80 (3.1)
104
(4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210
(8.2
) (X
-axi
s st
.)
112(4.4)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
Ø21
0 (8
")
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114 (4.5)
53 (2.1
)15
7 (6
.2)
210
(8.2
) (X
-axi
s st
.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124
(4.9
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210
(8.2
) (X
-axi
s st
.)
76 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210
(8.2
) (X
-axi
s st
.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0 (8
.2) (
X-a
xis
st.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0 (8
.2) (
X-a
xis
st.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (Spindle-Disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210
(8.2
) (X
-axi
s st
.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0 (8
.2) (
X-a
xis
st.)
112(4.4)
458(18) (Spindle-Disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
Ø21
0(8"
)40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
5(0
.2)
205
(8.1
)
210
(8.2
) (X
-axi
s st
.)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
5 (8
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
29 (1.1
)18
1 (7
.1)
210
(8.2
) (X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
51 (2)
159
(6.3
)21
0 (8
.2) (
X-a
xis
st.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88 (3.4) 80 (3.1) 160 (6.3) 120.8 (4.7)(Quill st.) (Tail Stock st.)
(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80 (3.1) 160 (6.3) 120.8 (4.7)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9 (6
")
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
91(3.6)
330 (13) (Max. Turning Length)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330(13) (Z-axis st.)310 (12.2) (PA)
310 (12.2) (PA)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0 (7
.5)
210
(8.2
) (X
-axi
s st
.)
93(3.6)
Ø32
(1.3
)
428 (16.8) (Spindle-Disk)408 (16) (PA)
330 (13) (Z-axis st.)310 (12.2) (PA)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449 (17.6) (Spindle-Disk)429 (16.8) (PC)
330 (13) (Z-axis st.)310(12.2) (PC)
Ø21
0 (8
")
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (Spindle-Disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200MC
unit : mm(in)Tooling�Travel�Range
SPECIFICATIONS
26+
27
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Traverse Rate (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m(lbf.ft)
-
-
deg
mm(in)
m/min(ipm)
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m(lbf.ft)
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
Specifications are subject to change without notice for improvement.
ITEM E200MAE200A E200PA
Ø550 (21.7″)
Ø350 (13.8″)
Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)
300 (11.8″) 255 (10″) 280 (11″)
Ø45 (1.8″)
Ø169 (6.7″)
Ø53 (2.1″)
6,000 [6,000] 6,000 6,000 [6,000]
15/11(20/15) 15/11 (20/15)
15/11(20/15)
[10.8/9(14.4/12)] [10.8/9(14.4/12)]
95.6/52.5 (70.5/38.7) 95.5/52.5(70.5/38.7)
95.5/52.5 (70.5/38.7)
[75.6/68.7(55.7/50.6)] [75.6/68.7(55.7/50.6)]
BELT
A2-5
- 0.001˚ -
210/330 (8.3″/13″) 210/286 (8.3″/11.3″) 210/310 (8.3″/12.2″)
36/36 (1,417/1,417) 24/24 {945/945)
LM GUIDE BOX GUIDE
12
□25 (1″) □20 (0.8″) □25 (1″)
Ø32 (1.3″)
0.12 0.23 0.12
- 8.8/3 (11.8/4) -
- 4,500 -
- 45/20 (33.2/15) -
- Ø16 (0.6″) ER25 -
- VDI30 -
MT4
Ø65 (2.6″)
80 (3.1″)
160 (6.3″)
135 (35.7)
1.8 (0.5)
17
OVER 16
220/60 (200/50)
2,020×1,763 (79.5″×69.4″)
1,820 (71.7″)
3,800 (8,378)
HYUNDAI WIA FANUC i Series [E200A/PA : HYUNDAI-iTROL]
Specifications [ ] : Option
SPECIFICATIONS
Specifications are subject to change without notice for improvement.
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Traverse Rate (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m(lbf.ft)
-
-
deg
mm(in)
m/min(ipm)
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m(lbf.ft)
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM E200MCE200C E200PC
Ø550 (21.7″)
Ø350 (13.8″)
Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)
270 (10.6″) 255 (10″) 270 (10.6″)
Ø65 (2.6″)
Ø210 (8.3″)
Ø78 (3.1″)
4,000 [4,000] [4,000] 4,000 4,000 [4,000]
15/11 (20/15) 15/11 (20/15)
[18.5/15 (24.8/20] 15/11 (20/15) [10.8/9(14.4/12)]
[10.8/9(14.4/12)]
167/92 (123.1/67.8) 167/92 (123.1/67.8)
[206/167 (152/123.2)] 167/92 (123.1/67.8) [132.3/110.3(97.5/81.3)]
[132.3/110.3(97.5/81.3)]
BELT
A2-6
- 0.001˚ -
210/330 (8.3″/13″) 210/286 (8.3″/11.3″) 210/310 (8.3″/12.2″)
36/36 (1,417/1,417) 24/24 {945/945)
LM GUIDE BOX GUIDE
12
□25 (1″) □20 (0.8″) □25 (1″)
Ø40 (1.6″) Ø32 (1.3″) Ø40 (1.6″)
0.12 0.23 0.12
- 8.8/3 (11.8/4) -
- 4,500 -
- 45/20 (33.2/15) -
- Ø16 (0.6″) ER25 -
- VDI30 -
MT4
Ø65 (2.6″)
80 (3.1″)
160 (6.3″)
135 (35.7)
1.8 (0.5)
17
OVER 16
220/60 (200/50)
2,050×1,763 (80.7″×69.4″)
1,820 (71.7″)
3,900 (8,598)
HYUNDAI WIA FANUC i Series [E200C/PC : HYUNDAI-iTROL]
Specifications [ ] : Option
SPECIFICATIONS
28+
29
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
CONTROLLER
HYUNDAI-iTROL�(E200A/PA�|�E200C/PC)Control & Composition Number of axis/SpindlesNumber of axis/Spindles, max.Color displayKeyboardPart programAddition of part program on CF cardTransfer FunctionFeedrate overrideTransfer value input rangeUnlimited rotation of rotation axisAcc./Dec. with jerk limitationMeasuring systems 1 and 2, selectableTravel to fixed stopAuto Servo Tuning (AST)Spindle FunctionSpindle overrideSpindle speed, max. programmable value rangeAutomatic gear stage selectionSpindle orientationSpindle speed limitationRigid tappingSpindle control with PLCInterpolationLinear interpolation axis, max.Circle via center point and end pointCircle via interpolation pointHelical interpolationNon-uniform rational B splinesContinuous - path mode with programmable rounding clearanceProgram FunctionSubroutine levels, max.Interrupt routines, max.Number of levels for skip blocksPolar CoordinatesDimensions inch/metric, changeover manually or via programDynamic preprocessing memory FIFOLook aheadAbsolute/Incremental commandScaling/RotationRead/Write system variablesBlock searchEdit backgroundProcessing program number, max.Using of CF Card, USBBasic coordinate number, max.Work coordinate number, max.Basic/Work coordinate programming changeScratching functionGlobal and Local user data (GUD/LUD)Global program user dataInteractive cycle programTool FunctionTool radius compensationsTool offset selection via T/D numbersTools / Cutting edges in tool listMonitoring FunctionWorking area limitSoftware and Hardware limitZero-speed/Clamping monitoring2D/3D protection zonesContour monitoringCompensationBacklash compensationLeadscrew error compensationMeasuring system error compensationFeedforward control (Speed control)
2 axes (X, Z) / 3 axes (X, Z, C) 8 axes (Axis + Spindle) TFT 10.4" Color (800 x 600) QWERTY Full Keyboard 1MB, 3MB, 5MB
0% ~ 200% ± 999999999
0% ~ 150% 1000000 ~ 0.0001
4 axes
7 2 2
1 G90 / G91
750
1 100
128 / 256, 256 / 512
Safety FunctionSafe torque off (STO)Safe brake control (SBC)Safe stop 1 (SS1)Diagnostic FunctionAlarm/Message , Alarm logPLC status/LAD online displayPLC remote connection (Ethernet)Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support FunctionActual velocity displayTool life managementWork counter/Cycle time2D simulationManual OperationManual handle/Jog transferManual measurement of workpiece / tool offsetAutomatic tool/Workpiece measurementAutomatic/Program reference approachAutomatic OperationProgram run as using CF card/USBProgram control/modificationBlock searchRepositionPreset (Set actual value)Data TransmissionEthernet networkUSB memory stick & CF cardConvenience FunctionProcessing setting(Coordinate system setting, TMS)Processing support(Tool Monitoring, Spindle overload monitoring)Maintenance(Turret Guidance, I/O monitoring, Manual)Management (Soft MCP, M/G code List)SMART machiningEnergy saving function (ECO)Machine Monitoring System (MMS Lite)languageStandard support language
OptionMaximum skip block numberDRF offsetMDI program save/loadTeach-In mode3D simulation(Except for working area/Collision check)Real time simulationInteractive program (Shop Turn)Spline interpolationProgram remote control in network
Language
As time / As amount Embedded
Chinese Simplified, English, Korean
10
Chinese Traditional, French, German,Italian, Portuguese, Spanish
HYUNDAI�WIA�FANUC�i�SeriesControl function / Screen display
Control axis number
Simultaneous control axis number
Min. input unit
Min. increment
High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub off
Backlash compensation
Position switchFault load detectionHigh resolution transfer control(HRM) LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, Transfer/rpmProgram input and interpolation function
Nano interpolation
Dwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycle
Max. 4 axesX, Z axisX, Z, C axis (M type machine)2 axes/straight, arc interpolation (Max. 4 axes)X, Z axis : 0.001 mm (0.0001″)C axis : 0.001 degX, Z axis : 0.001 mm (0.0001″)C axis: 0.001 deg
G20 / G21Each axes / All axesFull axes
Over-travel
+/- 0~9999 Pulse(Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25/F50, F100%
Positioning/Straight/Arc(G00/G01/G02/G03)G04, 0~9999.9999 sec
G28, ManualG27G30M00, M01 / M02, M30EIA / ISO1 EA+/- 9999.9999”O+4 digit number
G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`A/B/CG1010 Steps
#100 to #199, #500 to #999
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableControlling live tool by servo motor
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnData serverPolygon turningHelical interpolationDynamic graphic display8 level data protection functionManual guide i
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
M4 digit number
S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)
T2 + 264 pairs
G40, G41, G42
RS232C, Memory Card
1280m/512kbMax. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Selection of random 5 EAScreen saver
Turn millTurn millTurn millTurn millTurn millTurn millTurn mill
100 Mbps (Option board is required)9 EA
1GB
Interactive program (10.4″ Color LCD)
30+
31
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
GLOBAL�NETWORk
32+
33
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HEADQUARTER
OVERSEAS OFFICESHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887 FAX : +1 201 489 2723
Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041
TEL : +86 28 8665 5550FAX : +86 28 8666 2985
HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885FAX : +86 21 3431 0376
Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056
TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176
TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
Qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061
TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400
TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013
TEL : +86 24 3228 6640FAX : +86 24 3228 6642
2015-12 003.002 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
machine.hyundai-wia.com
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
E200C MovieE200A Movie