Click here to load reader
Upload
adolf07
View
131
Download
13
Tags:
Embed Size (px)
Citation preview
Certified QualityManagement System
04 V 038 E
Cembre S.p.A. factory in Brescia (ITALY)
This catalogue illustratesthe range of our standardproducts.For each product family weindicate the principal fea-tures, and sometimes themost frequent applicationsand the necessary guide-lines for a correct applica-tion.Our sales personnel are atyour disposal to supply moredetailed information and ourdesign and development en-gineers are available tostudy new solutions to par-ticular applications.
On 22nd December 1992the Quality ManagementSystem of our company wasupgraded by Lloyd’s Regis-ter Quality Assurance(LRQA) to ISO 9001 withfield of application enlargedto: “Design and Manufactureof cable accessories, elec-trical connectors and as-sociated tools”.In fact, our previous QualityManagement System al-ready assessed on 14th De-cember 1990 according toISO 9002, has been en-
larged to the Design andManufacture of all ourproducts; Cembre’s Quali-ty is now guaranteedacross our whole range ofproduction.The activity of the mainpremises in Brescia, the Ital-ian regional officies and thesubsidiaries companies inGreat Britain, France,Spain, Norway and Ger-many are ruled according tothe prescriptions of a soleQuality System; such Quali-ty System has been as-sessed by Lloyd’s Register
of Quality as conforming tothe prescriptions of theISO 9001:2000 norm forthe design, manufactureand marketing of cable ac-cessories, electrical con-nectors and related equip-ments. Repairing, refur-bishment and associatedequipment re-calibration.
This guarantees a homoge-neous and high quality lev-el of the products and serv-ices that Cembre provideto all its customers.
QUALITY POLICY AND OBJECTIVES
Cembre Ltd.factory in Curdworth (Birmingham)
ProductionUnits
1
Index CONNECTORS FOR PANELS AND DISTRIBUTION LINESHalogen free insulated terminals type VP, RP, BP, GP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5Insulated chain terminals type CRP, CBP, CGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7PVC insulated crimp terminals type RF, BF, GF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9Reinforced PVC insulated terminals type RK, BK, GK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11Female disconnect terminals type RF-F, BF-F, GF-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Male disconnect terminals type RF-M, BF-M, GF-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Partially insulated male/female connectors type RF-FM, BF-FM . . . . . . . . . . . . . . . . . . . . . .12Insulated bullet and socket connectors type RF-B, BF-B . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Butt and parallel connectors type PL-M, PL-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Butt connectors type NL-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Close end connectors type NL-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Female connectors, open barrel type RN-FA, BN-FA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Male conectors, open barrel type RN-MA, BN-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Male tabs, for board mounting type MP, MPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Connectors sleeves CFA, CMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Insulated end sleeves type PKD, PKE, PKC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16“Twin” insulated end sleeves type PKT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Uninsulated end sleeves type KE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Uninsulated terminals type S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19Copper tube crimping lugs type A-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21Ring tongue terminals with contained palm for L.V. circuit breakers type A-M . . . . . . . . . . . . .22Through connectors type L-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Parallel connectors type L-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Nylon insulated copper tube lugs type ANE-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Copper tube crimping lugs type A-M, for flexible copper conductor . . . . . . . . . . . . . . . . . . . .25Nylon insulated fork terminals type ANE-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Uninsulated pin connectors type A-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Nylon insulated pin terminals type ANE-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Flexible braids type FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
CONNECTORS FOR SPECIAL APPLICATIONSHeavy duty copper tube terminals type 2A-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Copper tube lugs 4ESI fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
CONNECTORS FOR DERIVATIONS AND EARTHING Sleeve connectors type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31Mechanical fixing lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Cable clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
HIGH VOLTAGE COPPER TERMINALSHigh voltage copper terminals type CA-M, 2A-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34High voltage terminals type CA-2M, 2A-2M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35High voltage stalk connectors type MT-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36High voltage copper through connectors type MT-TD, MT-GC . . . . . . . . . . . . . . . . . . . . . . . .37
CONNECTORS FOR ALUMINIUM CONDUCTORSAluminium terminals type AA-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Through connectors type MTMA-GC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Reducer through connectors type MTMA-GC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Bimetallic connectors, copper palm fixing type CAA-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40Bimetallic connectors, copper pin type MTA-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
“ZETApiù” series terminal blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-44“ZETAmini” series terminal blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-46“ZETAblock” four pole power distribution block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-46
TOOLSMechanical tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 to 51Pneumatic press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54Hydraulic crimping tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 to 63Hydraulic cable cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 to 69Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7014.4 Volt cordless hydraulic tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 to 78Hydraulic pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80Hydraulic units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
DIE SELECTOR CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 to 88
2
pag.
EL
EC
TR
IC
AL
C
ON
NE
CT
OR
S
4
The “P” range of terminalshas been designed, to meetthe increasing demands forimproved safety and reliabil-ity of electrical connectors. The polycarbonate insula-
VP RP BP GP
HALOGEN FREE INSULATED TERMINALS
P range funnel entry
tion, is a halogen free, selfextinguishing thermoplasticmaterial class V0 (UL 94).The unique funnel shapedentry of the insulationsleeve, guarantees total in-
sertion of the conductorstrands into the terminalbarrel, creating a secureand reliable, electrical andmechanical connection. The maximum operating
temperature is 115°C(Surge 130°C).Recommended installationTools are shown on pages48 to 53
RP-P 8 4,0 1,7 7,8 17,9 4.000/100
RP-P 10 4,0 1,8 9,8 19,9 4.000/100
RP-P 12 4,0 1,8 12,0 22,1 3.500/100
BP-P 8 4,9 1,7 7,8 17,9 3.000/100
BP-P 10 4,9 1,8 9,8 19,9 3.000/100
BP-P 12 4,9 1,8 11,8 21,9 3.000/100
GP-P 10 6,6 2,2 10,4 24,5 1.500/100
GP-P 12 6,6 2,2 12,6 26,7 1.500/100
GP-P 14 6,6 2,2 14,6 28,7 1.500/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
OPERATING
TEMPERATURE
UP TO 115° C
pin terminals blade terminals
VP-PP 12/19 3,0 1,9 12,4 22,4 4.000/100
RP-PP 12 4,0 3,0 12,8 22,9 3.500/100
RP-PP 12/1 4,0 3,0 11,3 21,4 3.500/100
RP-PP 12/19 4,0 1,9 13,2 23,3 3.500/100
RP-PP 12/23 4,0 2,3 13,2 23,3 3.500/100
RP-PP 14 4,0 3,0 14,8 24,9 3.500/100
RP-PP 16/23 4,0 2,3 17,2 27,3 3.500/100
BP-PP 12 4,9 3,5 12,8 22,9 2.500/100
BP-PP 12/25 4,9 2,5 13,3 23,4 2.500/100
BP-PP 12/29 4,9 2,9 13,3 23,4 2.500/100
BP-PP 16/25 4,9 2,5 17,2 27,3 2.500/100
GP-PP 12 6,6 4,0 13,3 27,4 1.000/100
GP-PP 17 6,6 2,9 19,1 33,2 1.000/100
0,2÷0,5(24÷20)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
Hooked Blade Terminals
RP-PPL 30 3,9 3,0 17,5 28,3 1,7 3.000/100
RP-PPL 46 3,9 4,6 17,5 28,3 1,7 3.000/100
BP-PPL 30 4,9 3,0 17,5 28,3 1,7 2.500/100
BP-PPL 46 4,9 4,6 17,5 28,3 1,7 2.500/100
GP-PPL 46 6,7 4,6 17,5 32,6 1,9 1.000/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
L XPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
5
2 VP-M 2 3,0 5,6 4,5 2,8 17,5 2,2 4.000/100
3 VP-M 3 3,0 5,6 4,5 2,8 17,5 3,2 4.000/100
3,5 VP-M 3,5 3,0 5,6 4,5 2,8 17,5 3,7 4.000/100
4 VP-M 4 3,0 7,0 6,5 3,5 20,2 4,3 4.000/100
5 VP-M 5 3,0 7,8 7,1 3,9 21,2 5,3 4.000/100
6 VP-M 6 3,0 9,4 8,1 4,7 23,0 6,4 4.000/1002 RP-M 2 4,0 5,6 4,5 2,8 17,4 2,2 3.500/1003 RP-M 3 4,0 5,6 4,5 2,8 17,4 3,2 3.500/1003,5 RP-M 3,5 4,0 5,6 4,5 2,8 17,4 3,7 3.500/1003,5 RP-M 3,5/1 4,0 6,2 7,1 3,1 20,2 3,7 3.500/1004 RP-M 4 4,0 7,0 6,5 3,5 20,1 4,3 3.500/1004 RP-M 4/3 4,0 7,8 7,1 3,9 21,1 4,3 3.500/1005 RP-M 5 4,0 7,8 7,1 3,9 21,1 5,3 3.500/1006 RP-M 6 4,0 9,4 8,1 4,7 22,9 6,4 3.000/1006 RP-M 6/1 4,0 12,0 10,3 6,0 26,4 6,4 3.000/1007 RP-M 7 4,0 9,4 8,1 4,7 22,9 7,2 2.500/1008 RP-M 8 4,0 12,0 10,3 6,0 26,4 8,4 2.500/100
10 RP-M 10 4,0 15,5 13,0 7,7 30,9 10,5 2.000/10012 RP-M 12 4,0 18,0 15,5 9,0 34,6 13,0 2.000/1002 BP-M 2 4,9 5,6 5,0 2,8 17,9 2,2 3.000/1003 BP-M 3 4,9 5,6 5,0 2,8 17,9 3,2 3.000/1003,5 BP-M 3,5 4,9 5,6 5,0 2,8 17,9 3,7 3.000/1003,5 BP-M 3,5/1 4,9 6,2 6,5 3,1 19,7 3,7 3.000/1004 BP-M 4 4,9 8,0 6,5 4,0 20,6 4,3 3.000/1005 BP-M 5 4,9 8,0 7,5 4,0 21,6 5,3 3.000/1006 BP-M 6 4,9 9,4 8,6 4,7 23,4 6,4 2.500/1006 BP-M 6/1 4,9 12,0 10,3 6,0 26,4 6,4 2.500/1006 BP-M 6/2 4,9 8,4 5,4 4,2 19,7 6,4 2.500/1007 BP-M 7 4,9 10,0 7,8 5,0 22,9 7,2 2.500/1008 BP-M 8 4,9 12,0 10,3 6,0 26,4 8,4 2.000/100
10 BP-M 10 4,9 15,5 13,0 7,7 30,9 10,5 1.500/10012 BP-M 12 4,9 18,0 15,5 9,0 34,6 13,0 1.500/1003 GP-M 3 6,6 8,0 8,1 4,0 26,2 3,2 1.500/1003,5 GP-M 3,5 6,6 8,0 8,1 4,0 26,2 3,7 1.500/1004 GP-M 4 6,6 9,0 8,1 4,5 26,7 4,3 1.500/1005 GP-M 5 6,6 9,0 8,1 4,5 26,7 5,3 1.000/1006 GP-M 6 6,6 11,0 11,1 5,5 30,7 6,4 1.000/1006 GP-M 6/1 6,6 11,0 8,1 5,5 27,7 6,4 1.000/1007 GP-M 7 6,6 11,0 11,1 5,5 30,7 7,2 1.000/1008 GP-M 8 6,6 13,6 12,1 6,8 33,0 8,4 1.000/1008 GP-M 8/1 6,6 11,0 8,1 5,5 27,7 8,4 1.000/100
10 GP-M 10 6,6 13,6 12,1 6,8 33,0 10,5 1.000/10010 GP-M 10/1 6,6 15,5 13,8 7,7 35,7 10,5 1.000/10012 GP-M 12 6,6 19,0 15,1 9,5 38,7 13,0 1.000/10014 GP-M 14 6,6 21,0 16,1 10,5 40,7 15,0 1.000/10016 GP-M 16 6,6 24,0 17,1 12,0 43,2 17,0 500/100
*
*
*
*
*
*
Cond. Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
3 VP-U 3 3,0 5,5 5,5 4,0 18,7 3,2 4.000/100
3,5 VP-U 3,5 3,0 6,0 6,5 3,8 19,5 3,7 4.000/100
4 VP-U 4 3,0 6,5 7,5 3,7 20,4 4,3 4.000/100
3 RP-U 3 4,0 5,5 5,5 4,0 19,6 3,2 4.000/1003,5 RP-U 3,5 4,0 6,0 6,5 3,8 20,4 3,7 4.000/1003,5 RP-U 3,5/2 4,0 6,4 6,5 3,8 20,4 3,7 3.500/1004 RP-U 4 4,0 6,5 7,5 3,7 21,3 4,3 3.500/1004 RP-U 4/1 4,0 8,5 7,5 3,7 21,3 4,3 3.500/1004 RP-U 4/2 4,0 7,5 7,5 3,7 21,3 4,3 3.500/1005 RP-U 5 4,0 8,5 7,5 3,7 21,3 5,3 3.500/1005 RP-U 5/1 4,0 9,4 7,5 3,7 21,3 5,3 3.500/1006 RP-U 6 4,0 9,4 8,1 4,7 22,9 6,4 2.500/1006 RP-U 6/1 4,0 12,0 9,2 7,1 26,4 6,4 2.500/1008 RP-U 8 4,0 14,0 10,0 6,3 26,4 8,4 2.500/100
10 RP-U 10 4,0 17,5 13,0 7,7 30,9 10,5 2.000/10012 RP-U 12 4,0 20,0 15,5 9,0 34,6 13,0 1.500/1003 BP-U 3 4,9 5,5 5,5 4,0 19,6 3,2 3.000/1003,5 BP-U 3,5 4,9 6,4 6,5 3,8 20,4 3,7 3.000/1003,5 BP-U 3,5/1 4,9 7,2 6,5 3,8 20,4 3,7 3.000/1004 BP-U 4 4,9 6,5 7,5 3,7 21,3 4,3 3.000/1004 BP-U 4/1 4,9 8,5 7,5 3,7 21,3 4,3 3.000/1004 BP-U 4/2 4,9 7,5 7,5 3,7 21,3 4,3 3.000/1005 BP-U 5 4,9 8,5 7,5 3,7 21,3 5,3 3.000/1006 BP-U 6 4,9 9,4 8,1 4,7 22,9 6,4 2.500/1006 BP-U 6/1 4,9 12,0 9,2 7,1 26,4 6,4 2.500/1008 BP-U 8 4,9 14,0 10,0 6,3 26,4 8,4 2.000/100
10 BP-U 10 4,9 17,5 13,0 7,7 30,9 10,5 2.000/10012 BP-U 12 4,9 20,0 15,5 9,0 34,6 13,0 1.500/1003,5 GP-U 3,5 6,6 7,5 8,5 3,9 26,5 3,7 1.500/100
4 GP-U 4 6,6 7,5 8,0 4,4 26,5 4,3 1.500/100
5 GP-U 5 6,6 9,5 8,0 4,4 26,5 5,3 1.500/100
6 GP-U 6 6,6 10,0 11,0 5,5 30,6 6,4 1.000/100
8 GP-U 8 6,6 15,0 12,0 8,0 34,1 8,4 1.000/100
10 GP-U 10 6,6 15,5 13,0 8,0 35,1 10,5 1.000/100
10 GP-U 10/1 6,6 17,5 13,8 7,7 35,7 10,5 1.000/100
12 GP-U 12 6,6 21,0 15,1 9,5 38,7 13,0 1.000/100
14 GP-U 14 6,6 23,0 16,1 10,5 40,7 15,0 500/100
16 GP-U 16 6,6 26,0 17,1 11,5 42,7 17,0 500/100
HALOGEN FREE INSULATED TERMINALS
P range funnel entry VP RPBP GP
0,2÷0,5(24÷20)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
0,2÷0,5(24÷20)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
*
*
*Available on request
ring terminals fork/spade terminals
Cond. Size sqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
6*Available on request
The “CP” range of termi-nals has been designed tomeet the increasing demandsfor improved safety and relia-bility of electrical connectors.
CRPCBPCGP
INSULATED CHAIN TERMINALS
CP range with easy entry
Developed for use with produc-tion machinery, to give a quickand reliable crimped joint. The polycarbonate insulation,is a halogen free, self extin-guishing thermoplastic materi-
al class V0 (UL 94). The unique funnel shaped entryof the insulation sleeve, guar-antees total insertion of theconductor strands into the ter-minal barrel, creating a secure
and reliable, electrical and me-chanical connection. The maximum operating tem-perature is 115°C (Surge130°C).
CRP-P 8 4,0 1,8 8,0 17,9CRP-P 10 4,0 1,8 10,0 19,9CRP-P 12 4,0 1,8 12,0 22,1CBP-P 8 4,9 1,8 8,0 17,9CBP-P 10 4,9 1,8 10,0 19,9CBP-P 12 4,9 1,8 12,0 21,9CGP-P 10 6,6 2,2 10,0 24,5CGP-P 12 6,6 2,2 12,0 26,7CGP-P 14 6,6 2,2 14,0 28,7
Conductor Sizesqmm(AWG)
QuantityØ
D i m e n s i o n s m m
LPBRef.
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4÷6(12÷10)
CRP-PP 12 4,0 3,0 12,8 22,9CRP-PP 12/1 4,0 3,0 11,3 21,4CRP-PP 12/23 4,0 2,3 13,2 23,3CRP-PP 14 4,0 3,0 14,8 24,9CBP-PP 12 4,9 3,5 12,8 22,9CBP-PP 12/25 4,9 2,5 13,3 23,4
CGP-PP 12 6,6 4,0 13,3 27,4
CGP-PP 17 6,6 2,9 19,1 33,2
**
*
*
Conductor Sizesqmm(AWG)
QuantityØ
D i m e n s i o n s m m
LPBRef.
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4÷6(12÷10)
Pin terminals blade terminal
CRP-M 608 6,35 x 0,8
CBP-M 608 6,35 x 0,8
CGP-M 608 6,35 x 0,8
Conductor Sizesqmm(AWG)
QuantityRef. Tab mmConductor Size
sqmm(AWG)
QuantityRef. Tab mmConductor Size
sqmm(AWG)
QuantityRef. Tab mm
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4÷6(12÷10)
CRP-F 305 2,8 x 0,5CRP-F 308 2,8 x 0,8CRP-F 405 4,8 x 0,5CRP-F 408 4,8 x 0,8CRP-F 608 6,35 x 0,8CBP-F 405 4,8 x 0,5CBP-F 408 4,8 x 0,8CBP-F 608 6,35 x 0,8
CGP-F 608 6,35 x 0,8
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4÷6(12÷10)
CRP-F 608P 6,35 x 0,8
CBP-F 608P 6,35 x 0,8
CGP-F 608P 6,35 x 0,8
1.500
1.500
1.250
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4÷6(12÷10)
male disconnect terminals female disconnect terminals female disconnect terminalsfully insulated
2.0002.0002.0001.7501.7501.7501.2501.2501.250
2.0002.0002.0002.0001.7501.750
1.250
1.250
2.000
1.750
1.250
2.0002.0002.0002.0002.0001.7501.7501.750
1.250
OPERATING
TEMPERATURE
UP TO 115° C
3 CRP-M 3 4,0 5,6 4,5 2,8 17,4 3,23,5 CRP-M 3,5 4,0 5,6 4,5 2,8 17,4 3,73,5 CRP-M 3,5/1 4,0 6,2 7,1 3,1 20,2 3,74 CRP-M 4 4,0 7,0 6,5 3,5 20,1 4,34 CRP-M 4/3 4,0 7,8 7,1 3,9 21,1 4,35 CRP-M 5 4,0 7,8 7,1 3,9 21,1 5,36 CRP-M 6 4,0 9,4 8,1 4,7 22,9 6,46 CRP-M 6/1 4,0 12,0 10,3 6,0 26,4 6,47 CRP-M 7 4,0 9,4 8,1 4,7 22,9 7,28 CRP-M 8 4,0 12,0 10,3 6,0 26,4 8,43 CBP-M 3 4,9 5,6 5,0 2,8 17,9 3,23,5 CBP-M 3,5 4,9 5,6 5,0 2,8 17,9 3,73,5 CBP-M 3,5/1 4,9 6,2 6,5 3,1 19,6 3,74 CBP-M 4 4,9 8,0 6,5 4,0 20,6 4,35 CBP-M 5 4,9 8,0 7,5 4,0 21,6 5,36 CBP-M 6 4,9 9,4 8,6 4,7 23,4 6,46 CBP-M 6/1 4,9 12,0 10,3 6,0 26,4 6,47 CBP-M 7 4,9 10,0 7,8 5,0 22,9 7,28 CBP-M 8 4,9 12,0 10,3 6,0 26,4 8,43 CGP-M 3 6,6 8,0 8,1 4,0 26,2 3,23,5 CGP-M 3,5 6,6 8,0 8,1 4,0 26,2 3,74 CGP-M 4 6,6 9,0 8,1 4,5 26,7 4,35 CGP-M 5 6,6 9,0 8,1 4,5 26,7 5,36 CGP-M 6 6,6 11,0 11,1 5,5 30,7 6,46 CGP-M 6/1 6,6 11,0 8,1 5,5 27,7 6,47 CGP-M 7 6,6 11,0 11,1 5,5 30,7 7,28 CGP-M 8 6,6 13,6 12,1 6,8 33,0 8,48 CGP-M 8/1 6,6 11,0 8,1 5,5 27,7 8,4
2.0002.0002.0002.0002.0002.0002.0002.0002.0002.0001.7501.7501.7501.7501.7501.7501.7501.7501.7501.2501.2501.2501.2501.2501.2501.2501.2501.250
7
*
*
*
*
*
*
*
Cond. Size sqmm(AWG)
QuantityØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
INSULATED CHAIN TERMINALS
CP range with easy entry CRPCBPCGP
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
*Available on request
ring terminals
Interchangeable applicationheads are available forthe bench press ELB-3 tosuit the crimping of theseconnectors (see page 54).
1,5÷2,5(16÷14)
4÷6(12÷10)
fork/spade terminals
3 CRP-U 3 4,0 5,5 5,5 4,0 19,6 3,23,5 CRP-U 3,5 4,0 6,0 6,5 3,8 20,4 3,73,5 CRP-U 3,5/2 4,0 6,4 6,5 3,8 20,4 3,74 CRP-U 4 4,0 6,5 7,5 3,7 21,3 4,34 CRP-U 4/1 4,0 8,5 7,5 3,7 21,3 4,34 CRP-U 4/2 4,0 7,5 7,5 3,7 21,3 4,35 CRP-U 5 4,0 8,5 7,5 3,7 21,3 5,36 CRP-U 6 4,0 9,4 8,1 4,7 22,9 6,46 CRP-U 6/1 4,0 12,0 9,2 7,1 26,4 6,48 CRP-U 8 4,0 14,0 10,0 6,3 26,4 8,43 CBP-U 3 4,9 5,5 5,5 4,0 19,6 3,23,5 CBP-U 3,5 4,9 6,4 6,5 3,8 20,4 3,74 CBP-U 4 4,9 6,5 7,5 3,7 21,3 4,34 CBP-U 4/1 4,9 8,5 7,5 3,7 21,3 4,34 CBP-U 4/2 4,9 7,5 7,5 3,7 21,3 4,35 CBP-U 5 4,9 8,5 7,5 3,7 21,3 5,36 CBP-U 6 4,9 9,4 8,1 4,7 22,9 6,43,5 CGP-U 3,5 6,6 7,5 8,5 3,9 26,5 3,74 CGP-U 4 6,6 7,5 8,0 4,4 26,5 4,35 CGP-U 5 6,6 9,5 8,0 4,4 26,5 5,36 CGP-U 6 6,6 10,0 11,0 5,5 30,6 6,4
2.0002.0002.0002.0002.0002.0002.0002.0002.0002.0001.7501.7501.7501.7501.7501.7501.7501.2501.2501.2501.250
*
**
**
**
**
Cond. Size sqmm(AWG)
QuantityØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
0,25÷1,5(22÷16)
4 CBP-U 4/3L 4,9 6,5 9,5 14,5 4,3 1.750
Cond. Size sqmm(AWG)
QuantityØ
D i m e n s i o n s m m
dLABRef.
ØStudmm
1,5÷2,5(16÷14)
8
The unique funnel shape ofPVC sleeve, guarantees to-tal insertion of the conduc-tor strands into the terminalbarrel, creating a secureand reliable, electrical andmechanical connection .
RF BFGF
PVC INSULATED CRIMP TERMINALS
F range funnel entry
The internal surface of thebarrel is rifled to improvecontact with conductorstrands when crimped andto increase tensile strength.The “F” range of terminalsoffers a wide selection of
RF-P 8 3,9 1,7 8,0 17,9 4.000/100
RF-P 10 3,9 1,8 10,0 19,9 4.000/100
RF-P 12 3,9 1,8 12,0 22,1 3.500/100
BF-P 8 4,9 1,7 8,0 17,9 3.000/100
BF-P 10 4,9 1,8 10,0 19,9 3.000/100
BF-P 12 4,9 1,8 12,0 21,9 3.000/100
GF-P 10 6,7 2,2 10,0 24,6 1.500/100
GF-P 12 6,7 2,2 12,0 26,8 1.500/100
GF-P 14 6,7 2,2 14,0 28,8 1.500/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
pin terminals blade terminals
RF-PP 12 3,9 3,0 12,8 22,9 3.500/100RF-PP 12/1 3,9 3,0 11,3 21,4 3.500/100RF-PP 12/19 3,9 1,9 13,2 23,3 3.500/100RF-PP 12/23 3,9 2,3 13,2 23,3 3.500/100RF-PP 14 3,9 3,0 14,8 24,9 3.500/100RF-PP 16/23 3,9 2,3 17,2 27,3 3.500/100
BF-PP 12 4,9 3,5 12,8 22,9 2.500/100
BF-PP 12/25 4,9 2,5 13,3 23,4 2.500/100
BF-PP 12/29 4,9 2,9 13,3 23,4 2.500/100
BF-PP 16/25 4,9 2,5 17,2 27,3 2.500/100
GF-PP 12 6,7 4,0 13,3 27,5 1.000/100
GF-PP 17 6,7 2,9 19,2 33,4 1.000/100
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
VALSTAR V3-FComprising:
- An assortment of crimpterminals for conductor
sizes 0,25 ÷ 6 sqmm- Tool HP3
rings, forks, pins andblades, designed to meetthe ever changing require-ments of the end users.Recommended crimpingtools are shown on pages48 to 53
Hooked Blade Terminals
RF-PPL 30 3,9 3,0 17,5 28,4 1,7 3.000/100
RF-PPL 46 3,9 4,6 17,5 28,4 1,7 3.000/100
BF-PPL 30 4,9 3,0 17,5 28,4 1,7 2.500/100
BF-PPL 46 4,9 4,6 17,5 28,4 1,7 2.500/100
GF-PPL 46 6,7 4,6 17,5 32,7 1,9 1.000/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
L XPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
9
2 RF-M 2 3,9 5,6 4,5 2,8 17,4 2,2 3.500/1003 RF-M 3 3,9 5,6 4,5 2,8 17,4 3,2 3.500/1003,5 RF-M 3,5 3,9 5,6 4,5 2,8 17,4 3,7 3.500/1003,5 RF-M 3,5/1 3,9 6,2 7,1 3,1 20,3 3,7 3.500/1004 RF-M 4 3,9 7,0 6,5 3,5 20,1 4,3 3.500/1004 RF-M 4/3 3,9 7,8 7,1 3,9 21,1 4,3 3.500/1005 RF-M 5 3,9 7,8 7,1 3,9 21,1 5,3 3.500/1006 RF-M 6 3,9 9,4 8,1 4,7 22,9 6,4 3.000/1006 RF-M 6/1 3,9 12,0 10,3 6,0 26,4 6,4 3.000/1007 RF-M 7 3,9 9,4 8,1 4,7 22,9 7,2 2.500/1008 RF-M 8 3,9 12,0 10,3 6,0 26,4 8,4 2.500/100
10 RF-M 10 3,9 15,5 13,0 7,7 30,9 10,5 2.000/10012 RF-M 12 3,9 18,0 15,5 9,0 34,6 13,0 2.000/1002 BF-M 2 4,9 5,6 5,0 2,8 17,9 2,2 3.000/1003 BF-M 3 4,9 5,6 5,0 2,8 17,9 3,2 3.000/1003,5 BF-M 3,5 4,9 5,6 5,0 2,8 17,9 3,7 3.000/1003,5 BF-M 3,5/1 4,9 6,2 6,5 3,1 19,7 3,7 3.000/1004 BF-M 4 4,9 8,0 6,5 4,0 20,6 4,3 3.000/1005 BF-M 5 4,9 8,0 7,5 4,0 21,6 5,3 3.000/1006 BF-M 6 4,9 9,4 8,6 4,7 23,4 6,4 2.500/1006 BF-M 6/1 4,9 12,0 10,3 6,0 26,4 6,4 2.500/1006 BF-M 6/2 4,9 8,4 5,4 4,2 19,7 6,4 2.500/1007 BF-M 7 4,9 10,0 7,8 5,0 22,9 7,2 2.500/1008 BF-M 8 4,9 12,0 10,3 6,0 26,4 8,4 2.000/100
10 BF-M 10 4,9 15,5 13,0 7,7 30,9 10,5 1.500/10012 BF-M 12 4,9 18,0 15,5 9,0 34,6 13,0 1.500/1003 GF-M 3 6,7 8,0 8,1 4,0 26,3 3,2 1.500/1003,5 GF-M 3,5 6,7 8,0 8,1 4,0 26,3 3,7 1.500/1004 GF-M 4 6,7 9,0 8,1 4,5 26,8 4,3 1.500/1005 GF-M 5 6,7 9,0 8,1 4,5 26,8 5,3 1.000/1006 GF-M 6 6,7 11,0 11,1 5,5 30,8 6,4 1.000/1006 GF-M 6/1 6,7 11,0 8,1 5,5 27,8 6,4 1.000/1007 GF-M 7 6,7 11,0 11,1 5,5 30,8 7,2 1.000/1008 GF-M 8 6,7 13,6 12,1 6,8 33,1 8,4 1.000/1008 GF-M 8/1 6,7 11,0 8,1 5,5 27,8 8,4 1.000/100
10 GF-M 10 6,7 13,6 12,1 6,8 33,1 10,5 1.000/10010 GF-M 10/1 6,7 15,5 13,8 7,7 35,8 10,5 1.000/10012 GF-M 12 6,7 19,0 15,1 9,5 38,8 13,0 1.000/10014 GF-M 14 6,7 21,0 16,1 10,5 40,8 15,0 1.000/10016 GF-M 16 6,7 24,0 17,1 12,0 43,3 17,0 500/100
*
*
*
*
Cond. Size sqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
3 RF-U 3 3,9 5,5 5,5 4,0 19,6 3,2 4.000/1003,5 RF-U 3,5 3,9 6,0 6,5 3,8 20,4 3,7 4.000/1003,5 RF-U 3,5/1 3,9 7,2 6,5 3,8 20,4 3,7 4.000/1003,5 RF-U 3,5/2 3,9 6,4 6,5 3,8 20,4 3,7 3.500/1004 RF-U 4 3,9 6,5 7,5 3,7 21,3 4,3 3.500/1004 RF-U 4/1 3,9 8,5 7,5 3,7 21,3 4,3 3.500/1004 RF-U 4/2 3,9 7,5 7,5 3,7 21,3 4,3 3.500/1005 RF-U 5 3,9 8,5 7,5 3,7 21,3 5,3 3.500/1005 RF-U 5/1 3,9 9,4 7,5 3,7 21,3 5,3 3.500/1006 RF-U 6 3,9 9,4 8,1 4,7 22,9 6,4 2.500/1006 RF-U 6/1 3,9 12,0 9,2 7,1 26,4 6,4 2.500/1008 RF-U 8 3,9 14,0 10,0 6,3 26,4 8,4 2.500/100
10 RF-U 10 3,9 17,5 13,0 7,7 30,9 10,5 2.000/10012 RF-U 12 3,9 20,0 15,5 9,0 34,6 13,0 1.500/100
3 BF-U 3 4,9 5,5 5,5 4,0 19,6 3,2 3.000/1003,5 BF-U 3,5 4,9 6,4 6,5 3,8 20,4 3,7 3.000/1003,5 BF-U 3,5/1 4,9 7,2 6,5 3,8 20,4 3,7 3.000/1004 BF-U 4 4,9 6,5 7,5 3,7 21,3 4,3 3.000/1004 BF-U 4/1 4,9 8,5 7,5 3,7 21,3 4,3 3.000/1004 BF-U 4/2 4,9 7,5 7,5 3,7 21,3 4,3 3.000/1005 BF-U 5 4,9 8,5 7,5 3,7 21,3 5,3 3.000/1006 BF-U 6 4,9 9,4 8,1 4,7 22,9 6,4 2.500/1006 BF-U 6/1 4,9 12,0 9,2 7,1 26,4 6,4 2.500/1008 BF-U 8 4,9 14,0 10,0 6,3 26,4 8,4 2.000/100
10 BF-U 10 4,9 17,5 13,0 7,7 30,9 10,5 2.000/10012 BF-U 12 4,9 20,0 15,5 9,0 34,6 13,0 1.500/100
3,5 GF-U 3,5 6,7 7,5 8,5 3,9 26,6 3,7 1.500/100
4 GF-U 4 6,7 7,5 8,0 4,4 26,6 4,3 1.500/100
5 GF-U 5 6,7 9,5 8,0 4,4 26,6 5,3 1.500/100
6 GF-U 6 6,7 10,0 11,0 5,5 30,7 6,4 1.000/100
8 GF-U 8 6,7 15,0 12,0 8,0 34,2 8,4 1.000/100
10 GF-U 10 6,7 15,5 13,0 8,0 35,2 10,5 1.000/100
10 GF-U 10/1 6,7 17,5 13,8 7,7 35,8 10,5 1.000/100
12 GF-U 12 6,7 21,0 15,1 9,5 38,8 13,0 1.000/100
14 GF-U 14 6,7 23,0 16,1 10,5 40,8 15,0 500/100
16 GF-U 16 6,7 26,0 17,1 11,5 42,8 17,0 500/100
PVC INSULATED CRIMP TERMINALS
F range funnel entry RF BFGF
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
*Available on request
ring terminals fork/spade terminals
Cond. Size sqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
*
*
10
“K” range terminals havebeen designed to offer max-imum efficiency under heavyduty applications.This enhanced performanceis achieved by involving the
RK BKGK
REINFORCED PVC INSULATED TERMINALS
K range
cable insulation in thecrimp, and utilising a coppersleeve which is located be-tween the terminal barreland the PVC sleeve.This copper sleeve will be
RK-P 8 4,1 1,7 7,8 17,8 4.000/100
RK-P 10 4,1 1,8 9,8 19,8 4.000/100
RK-P 12 4,1 1,8 12,0 22,0 3.500/100
BK-P 8 4,6 1,7 7,8 17,8 3.000/100
BK-P 10 4,6 1,8 9,8 19,8 3.000/100
BK-P 12 4,6 1,8 11,8 21,8 3.000/100
GK-P 10 6,6 2,2 10,4 24,4 1.500/100
GK-P 12 6,6 2,2 12,6 26,6 1.500/100
GK-P 14 6,6 2,2 14,6 28,6 1.500/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
LPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
pin terminals
Hooked Blade Terminals
blade terminals
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
formed around the cable in-sulation when crimped, togive increased mechanicalstrength to the joint.“K” range terminals aretherefore ideal for use in ap-
plications which are subjectto continuous mechanical vi-bration (eg. engines, mo-tors, rolling stock etc.).Recommended crimpingtool: HP 3-K
RK-PP 12 4,1 3,0 12,8 22,8 3.500/100
RK-PP 12/19 4,1 1,9 13,2 23,2 3.500/100
RK-PP 16/23 4,1 2,3 17,2 27,2 3.500/100
BK-PP 12 4,6 3,5 12,8 22,8 2.500/100
BK-PP 12/25 4,6 2,5 13,3 23,3 2.500/100
BK- PP 16/25 4,6 2,5 17,2 27,2 2.500/100
GK-PP 12 6,6 4,0 13,3 27,3 1.000/100
GK-PP 17 6,6 2,9 19,2 33,2 1.000/100
RK-PPL 30 4,1 3,0 17,5 28,3 1,7 3.000/100
RK-PPL 46 4,1 4,6 17,5 28,3 1,7 3.000/100
BK-PPL 30 4,6 3,0 17,5 28,3 1,7 2.500/100
BK-PPL 46 4,6 4,6 18,0 28,3 1,7 2.500/100
GK-PPL 46 6,6 4,6 17,5 32,5 1,9 1.000/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
L XPBRef.
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
11
3 RK-M 3 4,1 5,6 4,5 2,8 17,3 3,2 3.500/1003,5 RK-M 3,5 4,1 5,6 4,5 2,8 17,3 3,7 3.500/1003,5 RK-M 3,5/1 4,1 6,2 7,1 3,1 20,2 3,7 3.500/1004 RK-M 4 4,1 7,0 6,5 3,5 20,0 4,3 3.500/1005 RK-M 5 4,1 7,8 7,1 3,9 21,0 5,3 3.500/1006 RK-M 6 4,1 9,4 8,1 4,7 22,8 6,4 3.000/1006 RK-M 6/1 4,1 12,0 10,3 6,0 26,3 6,4 3.000/1007 RK-M 7 4,1 9,4 8,1 4,7 22,8 7,2 2.500/1008 RK-M 8 4,1 12,0 10,3 6,0 26,3 8,4 2.500/100
10 RK-M 10 4,1 15,5 13,0 7,7 30,8 10,5 2.000/10012 RK-M 12 4,1 18,0 15,5 9,0 34,5 13,0 2.000/1003 BK-M 3 4,6 5,6 5,0 2,8 17,8 3,2 3.000/1003,5 BK-M 3,5 4,6 5,6 5,0 2,8 17,8 3,7 3.000/1003,5 BK-M 3,5/1 4,6 6,2 6,5 3,1 19,6 3,7 3.000/1004 BK-M 4 4,6 8,0 6,5 4,0 20,5 4,3 3.000/1005 BK-M 5 4,6 8,0 7,5 4,0 21,5 5,3 3.000/1006 BK-M 6 4,6 9,4 8,6 4,7 23,3 6,4 2.500/1006 BK-M 6/1 4,6 12,0 10,3 6,0 26,3 6,4 2.500/1007 BK-M 7 4,6 10,0 7,8 5,0 22,8 7,2 2.500/1008 BK-M 8 4,6 12,0 10,3 6,0 26,3 8,4 2.000/100
10 BK-M 10 4,6 15,5 13,0 7,7 30,8 10,5 1.500/10012 BK-M 12 4,6 18,0 15,5 9,0 34,5 13,0 1.500/1003 GK-M 3 6,6 8,0 8,1 4,0 26,1 3,2 1.500/1003,5 GK-M 3,5 6,6 8,0 8,1 4,0 26,1 3,7 1.500/1004 GK-M 4 6,6 9,0 8,1 4,5 26,6 4,3 1.500/1005 GK-M 5 6,6 9,0 8,1 4,5 26,6 5,3 1.000/1006 GK-M 6 6,6 11,0 11,1 5,5 30,6 6,4 1.000/1007 GK-M 7 6,6 11,0 11,1 5,5 30,6 7,2 1.000/1008 GK-M 8 6,6 13,6 12,1 6,8 32,9 8,4 1.000/1008 GK-M 8/1 6,6 11,0 8,1 5,5 27,6 8,4 1.000/100
10 GK-M 10 6,6 13,6 12,1 6,8 32,9 10,5 1.000/10010 GK-M 10/1 6,6 15,5 13,8 7,7 35,6 10,5 1.000/10012 GK-M 12 6,6 19,0 15,1 9,5 38,6 13,0 1.000/10014 GK-M 14 6,6 21,0 16,1 10,5 40,6 15,0 1.000/10016 GK-M 16 6,6 24,0 17,1 12,0 43,1 17,0 500/100
Cond. Size sqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
3 RK-U 3 4,1 5,5 5,5 4,0 19,5 3,2 4.000/1003,5 RK-U 3,5 4,1 6,0 6,5 3,8 20,3 3,7 4.000/1004 RK-U 4 4,1 6,5 7,5 3,7 21,2 4,3 3.500/1005 RK-U 5 4,1 8,5 7,5 3,7 21,2 5,3 3.500/1006 RK-U 6 4,1 9,4 8,1 4,7 22,8 6,4 2.500/1006 RK-U 6/1 4,1 12,0 9,2 7,1 26,3 6,4 2.500/1008 RK-U 8 4,1 14,0 10,0 6,3 26,3 8,4 2.500/100
10 RK-U 10 4,1 17,5 13,0 7,7 30,8 10,5 2.000/10012 RK-U 12 4,1 20,0 15,5 9,0 34,5 13,0 1.500/100
3 BK-U 3 4,6 5,5 5,5 4,0 19,5 3,2 3.000/1003,5 BK-U 3,5 4,6 6,4 6,5 3,8 20,3 3,7 3.000/1004 BK-U 4 4,6 6,5 7,5 3,7 21,2 4,3 3.000/1005 BK-U 5 4,6 8,5 7,5 3,7 21,2 5,3 3.000/1006 BK-U 6 4,6 9,4 8,1 4,7 22,8 6,4 2.500/1006 BK-U 6/1 4,6 12,0 9,2 7,1 26,3 6,4 2.500/1008 BK-U 8 4,6 14,0 10,0 6,3 26,3 8,4 2.000/100
10 BK-U 10 4,6 17,5 13,0 7,7 30,8 10,5 2.000/10012 BK-U 12 4,6 20,0 15,5 9,0 34,5 13,0 1.500/100
3,5 GK-U 3,5 6,6 7,5 8,5 3,9 26,4 3,7 1.500/100
4 GK-U 4 6,6 7,5 8,0 4,4 26,4 4,3 1.500/100
5 GK-U 5 6,6 9,5 8,0 4,4 26,4 5,3 1.500/100
6 GK-U 6 6,6 10,0 11,0 5,5 30,5 6,4 1.000/100
8 GK-U 8 6,6 15,0 12,0 8,0 34,0 8,4 1.000/100
10 GK-U 10 6,6 15,5 13,0 8,0 35,0 10,5 1.000/100
12 GK-U 12 6,6 21,0 15,1 9,5 38,6 13,0 1.000/100
14 GK-U 14 6,6 23,0 16,1 10,5 40,6 15,0 500/100
16 GK-U 16 6,6 26,0 17,1 11,5 42,6 17,0 500/100
REINFORCED PVC INSULATED TERMINALS
K range RK BKGK
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
ring terminals fork/spade terminals
Cond. Size sqmm(AWG)
QuantityBox/BagØ
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
12
Manufactured from brass strip - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 53
RF-FBF-FGF-F
FEMALE DISCONNECT TERMINALS
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Tab
Size
RF-F 305 2,8 x 0,5RF-F 308 2,8 x 0,8RF-F 405 4,8 x 0,5RF-F 408 4,8 x 0,8
RF-F 608 6,35 x 0,8
BF-F 405 4,8 x 0,5BF-F 408 4,8 x 0,8
BF-F 608 6,35 x 0,8
GF-F 608 6,35 x 0,8
3.500/1003.500/1003.000/1003.000/100
2.500/100
3.000/1003.000/100
2.000/100
1.500/100
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4**÷6(12**÷10)
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Tab
Size
RF-F 305P 2,8 x 0,5RF-F 308P 2,8 x 0,8RF-F 405P 4,8 x 0,5RF-F 408P 4,8 x 0,8
RF-F 608P 6,35 x 0,8
BF-F 405P 4,8 x 0,5BF-F 408P 4,8 x 0,8
BF-F 608P 6,35 x 0,8
GF-F 608P 6,35 x 0,8
2.500/1002.500/1002.500/1002.000/100
1.500/100
2.000/1002.000/100
1.500/100
1.000/100
polycarbonate partially insulated terminals
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Tab
Size
RK-F 608 6,35 x 0,8
BK-F 608 6,35 x 0,8
GK-F 608 6,35 x 0,8
2.500/100
2.000/100
1.500/100
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4**÷6(12**÷10)
PVC insulated and REINFORCED
polycarbonate fully insulated terminals
**Not UL Approved
**Not UL Approved
Manufactured from brass strip - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 53
RF-MBF-MGF-M
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Tab
Size
RF-M 608 6,35 x 0,8
BF-M 608 6,35 x 0,8
GF-M 608 6,35 x 0,8
3.000/100
2.500/100
1.000/100
1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
4**÷6(12**÷10)
polycarbonate partially insulated terminalsCond. Size
sqmm(AWG)
QuantityBox/BagRef. Tab
Size
RF-M 608P 6,35 x 0,8
BF-M 608P 6,35 x 0,8
1.500/100
1.500/100
polycarbonate fully insulated terminals
Manufactured from brass strip - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 53
RF-FMBF-FMRF-BBF-B
MALE/FEMALE CONNECTORS BULLET AND SOCKET CONNECTORS
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Tab
Size
RF-FM 608 6,35 x 0,8
BF-FM 608 6,35 x 0,8
1.500/100
1.500/1001,5÷2,5(16÷14)
0,25÷1,5(22÷16)
polycarbonate partially insulated terminalsCond. Size
sqmm(AWG)
QuantityBox/BagRef. Øi
mm
RF-BM 4 4
RF-BF 4 4
BF-BM 5 5
BF-BF 5 5
2.500/100
1.000/100
2.000/100
800/100
polycarbonate insulated terminals
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
4**÷6(12**÷10)
0,25÷1,5(22÷16)1,5÷2,5(16÷14)
0,25÷1,5(22÷16)
1,5÷2,5(16÷14)
QUICK CONNECT CONNECTOR28 JB
QUICK CONNECT CONNECTOR28 JB
QUICK CONNECT CONNECTOR28 JB
MALE DISCONNECT TERMINALS
13
BUTT AND PARALLEL CONNECTORS
PVC insulated
PL-MPL-P
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Ø
mmL
mm
PL 01-M 3,0 25
PL 03-M 4,0 25
PL 06-M 5,0 25
PL 1-M 6,5 32
PL 03-P 4,0 20
PL 06-P 5,0 16
3.000/100
2.000/100
1.500/100
800/100
3.000/100
2.000/100
1,5÷2,5(16÷14)
4÷6(12÷10)
0,25÷1,5(22÷16)
0,2÷0,5(24÷20)
1,5÷2,5(16÷14)
butt connectors
parallel connectors
Manufactured from copper tube - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 530,25÷1,5(22÷16)
BUTT CONNECTORS
NL-M
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Øi
mmL
mm
NL 03-M 4,0 25,0
NL 06-M 5,4 25,5
NL 1-M 5,4 32,0
NL 2-M 6,8 43,0
NL 3-M 7,9 44,0
2.500/100
2.000/100
1.000/100
500/100
500/100
1,5÷2,5(16÷14)
4÷6(12÷10)
0,25÷1,5(22÷16)
16(6÷5)
Manufactured from copper tube - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 53
10(8÷7)
CLOSE END CONNECTORS
NL-P
Cond. Sizesqmm(AWG)
QuantityBox/BagRef. Øi
mmL
mm
NL 06-P 7,9 19,9
NL 06-PB 6,5 13,6
NL 1-P 10,5 21,5
NL 1-PG 9,0 17,8
1.500/100
1.500/100
800/100
1.000/100
1,5÷2,5(16÷14)
4÷6(12÷10)
Manufactured from copper tube - Electrolytically tin plated- Recommended crimping tools
are shown on pages 48 to 53
Nylon insulated
Nylon insulated
14
- Manufactured from brass strip- Recommended crimping tool is shown on page 49
RN-FABN-FA
FEMALE CONNECTORS
open barrel
Conductor Sizesqmm(AWG)
QuantityBox/Bag
TabmmRef. M
mmL
mm
RN-FA 305 2,8 x 0,5 6,3 15,0RN-FA 405 4,8 x 0,5 6,3 15,0RN-FA 608 6,3 x 0,8 7,7 19,0
BN-FA 608 6,3 x 0,8 7,7 19,0
BN-FAB 608 6,3 x 0,8 7,7 15,5
BN-FAR 608 6,3 x 0,8 7,7 19,0
6.000/1005.000/1003.000/100
3.000/100
1.000/100
3.000/100
1÷2,5(17÷14)
1÷2,5(17÷14)
0,5÷1(20÷17)
1÷2,5(17÷14)
*
**
*flag type **with retainer
- Manufactured from brass strip- Recommended crimping tool is shown on page 49
RN-MABN-MA
MALE CONNECTORS
open barrel
Conductor Sizesqmm(AWG)
QuantityBox/Bag
TabmmRef. M
mmL
mm
RN-MA 305 2,8 x 0,5 5,8 13,0RN-MA 405 4,8 x 0,5 6,3 17,3RN-MA 608 6,3 x 0,8 7,9 19,7
BN-MA 608 6,3 x 0,8 7,9 20,0
6.000/1005.000/1004.000/100
4.000/1001÷2,5(17÷14)
0,5÷1(20÷17)
- Manufactured from brass strip
MPMPD
MALE TABS
for board mounting
*double tab
Ref. QuantityBox/Bag
Tabmm
Cmm
Bmm
ØStudmm
α
MP 608 6,3 x 0,8 4 8 8,5 0°MP 608/45 6,3 x 0,8 4 8 8,5 45°MP 608/90 6,3 x 0,8 4 8 8,5 90°
MP 608D 6,3 x 0,8 4 8 14 0°
5.000/1006.000/1005.000/100
5.000/100*
15
CONNECTOR SLEEVES
CFACMA
UL Approved ®
Ref. QuantityBox/BagConnector M
mmB
mmL
mm Material
CFA 300 Female 2,8 5,5 7 18 Polyethylene
CFA 400 Female 4,8 7,5 9 20 Polyethylene
CFA 600 Female 6,3 9,0 11 24 Polyethylene
CFA2 600 Female 6,3 9,0 9 22 Polyethylene
CFAR 600 9,0 12 25 Polyamide 6.6
CFAB 600 Female 6,310,0 – 19 Polyamide 6.6flag
*CMA 600 Male 6,3 12,0 11 22 Polyethylene
3.000/100
2.000/100
1.500/100
1.500/100
1.000/100
1.000/100
1.000/100
*
**
* For a single cable.Colours available:Transparent: no suffixRed: add suffix RBlack: add suffix N
**For twin cables.Colours available:Transparent: no suffixRed: add suffix RBlack: add suffix NGreen: add suffix VBlue: add suffix BYellow: add suffix G
Female 6,3frontal insertion
with retainer
ConductorSize
sqmmQuantity
ReelInsulation
ColourØ
D i m e n s i o n s m m
LPBRef.
CPKD 508 2,6 1,4 8,0 14,5CPKD 7508 2,8 1,6 8,0 14,5CPKD 108 3,0 1,8 8,0 14,5CPKD 1508 3,5 2,1 8,0 14,5CPKD 2508 4,2 2,6 8,0 15,0
5.0005.0005.0005.0003.000
0,3÷0,50,75
11,52,5
whitegrey
blue
redblack
Insulated chainend sleevesDeveloped for use withproduction equipment, to givea quick and reliable crimped joint.Conforms to DIN standard 46 228/4.
ConductorSize
sqmmQuantityBox/Bag
Insulation Colour
Ø
D i m e n s i o n s m m
LPBRef.
PKD 506 2,6 1,4 6,0 12,0 PKD 508 2,6 1,4 8,0 14,0PKD 510 2,6 1,4 10,0 16,0PKD 7506 2,8 1,6 6,0 12,4PKD 7508 2,8 1,6 8,0 14,0PKD 7510 2,8 1,6 10,0 16,4PKD 7512 2,8 1,6 12,0 18,4PKD 106 3,0 1,8 6,0 12,4PKD 108 3,0 1,8 8,0 14,0PKD 110 3,0 1,8 10,0 16,4PKD 112 3,0 1,8 12,0 18,4PKD 1508 3,5 2,1 8,0 14,0PKD 1510 3,5 2,1 10,0 16,4PKD 1512 3,5 2,1 12,0 18,4PKD 1518 3,5 2,1 18,0 24,4PKD 2508 4,2 2,6 8,0 15,0PKD 2512 4,2 2,6 12,0 19,0PKD 2518 4,2 2,6 18,0 25,0PKD 410 4,8 3,3 10,0 17,0PKD 412 4,8 3,3 12,0 19,0PKD 418 4,8 3,3 18,0 25,0 PKD 612 6,3 4,0 12,0 20,0PKD 618 6,3 4,0 18,0 26,0PKD 1012 7,6 5,0 12,0 21,5PKD 1018 7,6 5,0 18,0 27,5PKD 1612 8,8 6,4 12,0 22,5PKD 1618 8,8 6,4 18,0 28,5PKD 25016 11,2 7,9 16,0 29,0PKD 25022 11,2 7,9 22,0 35,0PKD 35016 12,7 8,8 16,0 30,0PKD 35025 12,7 8,8 25,0 39,0PKD 50020 15,0 11,0 20,0 36,0PKD 50025 15,0 11,0 25,0 41,0
10.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/5007.500/5007.500/5005.000/5007.500/5005.000/5005.000/5005.000/2004.000/2003.000/2002.500/1002.000/1001.500/1001.500/1001.000/1001.000/100
500/50500/50500/50400/50300/50300/50
0,3÷0,5
0,75
1
2,5
4
6
10
16
25
35
50
1,5
white
grey
red
black
blue
grey
yellow
red
blue
yellow
red
blue
16
PKDPKEPKC
POLYPROPYLENE INSULATED END SLEEVES
for flexible copper cables
*To DIN standard 46 228/4
ConductorSize
sqmmQuantityBox/Bag
Insulation Colour
Ø
D i m e n s i o n s m m
LPBRef.
PKC 306 1,9 1,1 6,0 10,4 PKC 308 1,9 1,1 8,0 12,4PKC 508 2,6 1,3 8,0 14,0PKC 510 2,6 1,3 10,0 16,0PKC 7508 2,8 1,6 8,0 14,0PKC 7512 2,8 1,6 12,0 18,4PKC 108 3,0 1,8 8,0 14,0PKC 112 3,0 1,8 12,0 18,4PKC 1508 3,5 2,1 8,0 14,0PKC 1510 3,5 2,1 10,0 16,4PKC 1518 3,5 2,1 18,0 24,4PKC 2508 4,2 2,6 8,0 15,0PKC 2512 4,2 2,6 12,0 19,0PKC 2518 4,2 2,6 18,0 25,0PKC 409 4,8 3,3 10,0 17,0PKC 412 4,8 3,3 12,0 19,0PKC 418 4,8 3,3 18,0 25,0PKC 612 5,8 3,9 12,0 20,0PKC 618 5,8 3,9 18,0 26,0PKC 1012 7,4 4,9 12,0 21,5PKC 1018 7,4 4,9 18,0 27,5 PKC 1612 8,8 6,2 12,0 22,7PKC 1618 8,8 6,2 18,0 28,6PKC 25016 10,0 7,9 16,0 29,0PKC 25022 10,0 7,9 22,0 35,0PKC 35016 12,0 8,9 16,0 30,0PKC 35025 12,0 8,9 25,0 39,0PKC 50020 13,8 11,0 20,0 36,0PKC 50030 13,8 11,0 30,0 46,0
25.000/50025.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/50010.000/5007.500/5005.000/5007.500/5005.000/5005.000/5005.000/2004.000/2003.000/2002.500/1002.000/1001.500/1001.500/1001.000/1001.000/100
500/50500/50500/50400/50300/50250/50
0,1÷0,3
0,3÷0,5
0,75
1
1,5
2,5
4
6
10
16
25
35
50
light blue
orange
white
yellow
red
blue
grey
black
ivory
green
brown
beige
olive
The PK.. range of end sleevesis manufactured from tin plat-ed electrolytic copper. Designed and developed toreinforce the fine wirestrands, when terminating acable into a connector block.The PKD series of insulatedend sleeves comply withspecification DIN 46 228/4.
Recommended crimpingtools are shown on pages 48to 53 and 57
******
ConductorSize
sqmmQuantityBox/Bag
InsulationColour
Ø
D i m e n s i o n s m m
LPBRef.
PKE 308 1,9 1,1 8,0 12,4 PKE 508 2,6 1,3 8,0 14,0PKE 7508 2,8 1,6 8,0 14,0PKE 108 3,0 1,8 8,0 14,0PKE 1508 3,5 2,1 8,0 14,0PKE 1510 3,5 2,1 10,0 16,4PKE 1518 3,5 2,1 18,0 24,4PKE 2508 4,2 2,6 8,0 15,0PKE 2512 4,2 2,6 12,0 19,0PKE 2518 4,2 2,6 18,0 25,0PKE 409 4,8 3,3 10,0 17,0PKE 412 4,8 3,3 12,0 19,0PKE 418 4,8 3,3 18,0 25,0PKE 612 5,8 3,9 12,0 20,0PKE 618 5,8 3,9 18,0 26,0PKE 1012 7,4 4,9 12,0 21,5PKE 1018 7,4 4,9 18,0 27,5PKE 1612 8,8 6,2 12,0 22,7PKE 1618 8,8 6,2 18,0 28,6PKE 25016 10,0 7,9 16,0 29,0PKE 25022 10,0 7,9 22,0 35,0
25.000/50010.000/50010.000/50010.000/50010.000/5007.500/5005.000/5007.500/5005.000/5005.000/5005.000/2004.000/2003.000/2002.500/1002.000/1001.500/1001.500/1001.000/1001.000/100
500/50500/50
0,1÷0,30,3÷0,5
0,751
yellowwhitebluered
*
****
black
grey
orange
green
brown
white
black
1,5
2,5
4
6
10
16
25
VALSTAR ND#2/PKDComprising:- a selection of end sleeves PKD
conductor size 1÷6 sqmm- tool ND#2
VALSTAR ND#2/PKEComprising:- a selection of end sleeves PKE
conductor size 1÷6 sqmm- tool ND#2
VALSTAR ND#2/PKCComprising:- a selection of end sleeves PKC
conductor size 1÷6 sqmm- tool ND#2
PKT
17
“TWIN” POLYPROPYLENE INSULATED END SLEEVES
for fine stranded cables
ConductorSize
sqmm
ND#1,ND#2,ND#3and HNKE 50Compression
Aperture
QuantityBox/Bag
InsulationColour
C
D i m e n s i o n s m m
LPBRef.
PKT 7508 5,2x2,6 2,1 8,0 15,0 PKT 7512 5,2x2,6 2,1 12,0 19,0PKT 108 5,8x3,2 2,6 8,0 16,0PKT 112 5,8x3,2 2,6 12,0 20,0PKT 1508 6,5x3,6 2,6 8,0 16,0PKT 1512 6,5x3,6 2,6 12,0 20,0PKT 2510 7,5x4,3 3,2 9,0 18,0PKT 2512 7,5x4,3 3,2 12,0 21,0
PKT 412 9,0x5,2 4,2 12,0 23,0
PKT 614 10,0x7,2 5,3 14,0 26,0
PKT 1014 13,0x7,2 7,0 14,0 26,0
PKT 1614 18,0x9,5 8,8 14,0 30,0
2.500/1002.500/1002.500/1002.500/1002.500/1002.500/1002.500/1002.500/100
1.500/100
1.000/100
500/50
300/50
2 x 0,75
2 x 1
2 x 1,5
2 x 2,5
2 x 4
2 x 6
2 x 10
2 x 16
*To DIN standard 46 228/1
grey
red
black
blue
grey
yellow
red
blue
1,5
1,5
2,5
4
6
10
16
35
Type PKT range of endsleeves is manufacturedfrom tin plated electrolyticcopper.Designed to accomodatetwo cables terminating in thesame sleeve.
Recommended crimpingtools are shown on pages48 to 53 and 57
KEUNINSULATED END SLEEVES
for flexible copper cables
Conductor Sizesqmm
QuantityBox/Bag
D i m e n s i o n s m m
CLØiRef.
KE 506 ST 1,0 6 2,1KE 508 ST 1,0 8 2,1KE 7506 ST 1,2 6 2,3KE 7508 ST 1,2 8 2,3KE 106 ST 1,4 6 2,5KE 110 ST 1,4 10 2,5KE 1508 ST 1,8 7 2,8KE 1510 ST 1,8 10 2,8KE 2508 ST 2,3 7 3,4KE 2510 ST 2,3 10 3,4KE 410 ST 2,8 9 4,0KE 412 ST 2,8 12 4,0KE 610 ST 3,5 10 4,7KE 612 ST 3,5 12 4,7KE 616 ST 3,5 15 4,7KE 1016 ST 4,5 15 5,8KE 1616 ST 5,8 15 7,5KE 25012 ST 7,3 12 9,5KE 25018 ST 7,3 18 9,5KE 35012 ST 8,3 12 11,0KE 35018 ST 8,3 18 11,0
50.000/50050.000/50050.000/50050.000/50025.000/50025.000/50025.000/50025.000/50025.000/50020.000/50012.500/50012.500/50010.000/5007.500/5005.000/5004.000/2503.000/2502.500/1001.500/1001.500/1001.000/100
0,5
0,75
1
1,5
2,5
4
6
25
35
1016
KE series end sleeves ismanufactured from tin plat-ed electrolytic copper.Designed and developed foruse with flexible cables.
Recommended crimpingtools are shown on pages48 to 53 and 57
*
*
*************
*
*
S 1,5-PP 12 1,8 3,0 12,8 17,0S 1,5-PP 12/1 1,8 3,0 11,3 15,5S 1,5-PP 12/19 1,8 1,9 13,2 17,4S 1,5-PP 14 1,8 3,0 14,8 19,0S 1,5-PP 16/23 1,8 2,3 17,2 21,4
S 2,5-PP 12 2,4 3,5 12,8 17,0
S 2,5-PP 12/25 2,4 2,5 13,3 17,5
S 2,5-PP 16/25 2,4 2,5 17,2 21,4
S 6-PP 12 3,6 4,0 13,3 19,7
S 6-PP 17 3,6 2,9 19,1 25,5
8.000/1008.000/1008.000/1008.000/1008.000/100
7.000/100
7.000/100
7.000/100
4.000/100
4.000/100
18*Available on request
S range terminals are man-ufactured from electrolyticcopper strip and tin plated.The seam is brazed to pro-
SUNINSULATED TERMINALS
S range - brazed seam
vide uniform mechanicalstrength. The terminal barrel is rifledto enhance electrical con-
tact and to improve me-chanical strength.
Recommended crimpingtools are shown on pages48 to 53.
S 1,5-P 8 1,8 1,7 8,0 12,0
S 1,5-P 10 1,8 1,8 10,0 14,0
S 1,5-P 12 1,8 1,8 12,0 16,2
S 2,5-P 8 2,4 1,7 8,0 12,0
S 2,5-P 10 2,4 1,8 10,0 14,0
S 2,5-P 12 2,4 1,8 12,0 16,0
S 6-P 10 3,6 2,2 10,0 16,8
S 6-P 12 3,6 2,2 12,0 19,4
S 6-P 14 3,6 2,2 14,0 21,0
8.000/100
8.000/100
8.000/100
7.000/100
7.000/100
7.000/100
4.000/100
4.000/100
4.000/100
Conductor Sizesqmm(AWG)
QuantityBox/BagØi
D i m e n s i o n s m m
LPBRef.
Conductor Sizesqmm(AWG)
QuantityBox/BagØi
D i m e n s i o n s m m
LPBRef.
0,25÷1,25(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
0,25÷1,25(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
pin terminals blade terminals
*
*
19
2 S 1,5-M 2 1,8 5,6 4,5 2,8 11,5 2,23 S 1,5-M 3 1,8 5,6 4,5 2,8 11,5 3,23,5 S 1,5-M 3,5 1,8 5,6 4,5 2,8 11,5 3,73,5 S 1,5-M 3,5/1 1,8 6,2 7,1 3,1 14,4 3,74 S 1,5-M 4 1,8 7,0 6,5 3,5 14,2 4,34 S 1,5-M 4/3 1,8 7,8 7,1 3,9 15,2 4,35 S 1,5-M 5 1,8 7,8 7,1 3,9 15,2 5,36 S 1,5-M 6 1,8 9,4 8,1 4,7 17,0 6,46 S 1,5-M 6/1 1,8 12,0 10,3 6,0 20,5 6,47 S 1,5-M 7 1,8 9,4 8,1 4,7 17,0 7,28 S 1,5-M 8 1,8 12,0 10,3 6,0 20,5 8,4
10 S 1,5-M 10 1,8 15,5 13,0 7,7 25,0 10,512 S 1,5-M 12 1,8 18,0 15,5 9,0 28,7 13,02 S 2,5-M 2 2,4 5,6 5,0 2,8 12,0 2,23 S 2,5-M 3 2,4 5,6 5,0 2,8 12,0 3,23,5 S 2,5-M 3,5 2,4 5,6 5,0 2,8 12,0 3,73,5 S 2,5-M 3,5/1 2,4 6,2 6,5 3,1 13,8 3,74 S 2,5-M 4 2,4 8,0 6,5 4,0 14,7 4,35 S 2,5-M 5 2,4 8,0 7,5 4,0 15,7 5,36 S 2,5-M 6 2,4 9,4 8,6 4,7 17,5 6,46 S 2,5-M 6/1 2,4 12,0 10,3 6,0 20,5 6,47 S 2,5-M 7 2,4 10,0 7,8 5,0 17,0 7,28 S 2,5-M 8 2,4 12,0 10,3 6,0 20,5 8,4
10 S 2,5-M 10 2,4 15,5 13,0 7,7 25,0 10,512 S 2,5-M 12 2,4 18,0 15,5 9,0 28,7 13,03 S 6-M 3 3,6 8,0 8,1 4,0 18,5 3,23,5 S 6-M 3,5 3,6 8,0 8,1 4,0 18,5 3,74 S 6-M 4 3,6 9,0 8,1 4,5 19,0 4,35 S 6-M 5 3,6 9,0 8,1 4,5 19,0 5,36 S 6-M 6 3,6 11,0 11,1 5,5 23,0 6,46 S 6-M 6/1 3,6 11,0 8,1 5,5 20,0 6,47 S 6-M 7 3,6 11,0 11,1 5,5 23,0 7,28 S 6-M 8 3,6 13,6 12,1 6,8 25,3 8,48 S 6-M 8/1 3,6 11,0 8,1 5,5 20,0 8,4
10 S 6-M 10 3,6 13,6 12,1 6,8 25,3 10,510 S 6-M 10/1 3,6 15,5 13,8 7,7 28,0 10,512 S 6-M 12 3,6 19,0 15,1 9,5 31,0 13,014 S 6-M 14 3,6 21,0 16,1 10,5 33,0 15,016 S 6-M 16 3,6 24,0 17,1 12,0 35,5 17,04 S 10-M 4 4,8 11,5 9,0 5,8 23,8 4,35 S 10-M 5 4,8 11,5 9,0 5,8 23,8 5,36 S 10-M 6 4,8 11,5 9,0 5,8 23,8 6,47 S 10-M 7 4,8 11,5 9,0 5,8 23,8 7,2
7.000/1007.000/1007.000/1007.000/1007.000/1007.000/1007.000/1006.000/1005.000/1006.000/1005.000/1003.500/1002.000/1008.000/1006.000/1006.000/1006.000/1006.000/1006.000/1005.000/1005.000/1005.000/1004.000/1003.500/1002.000/1003.000/1003.000/1003.000/1002.500/1002.500/1002.500/1002.500/1002.500/1002.500/1002.000/1002.000/1002.000/1001.000/1001.000/1002.000/1002.000/1002.000/1001.500/100
*
*
*
*
*
*
*
Cond. Sizesqmm(AWG)
QuantityBox/BagØi
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
UNINSULATED TERMINALS
S range - brazed seam S
0,25÷1,25(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
10(8)
*Available on request
ring terminals fork/spade terminals
3 S 1,5-U 3 1,8 5,5 5,5 4,0 13,7 3,23,5 S 1,5-U 3,5 1,8 6,0 6,5 3,8 14,5 3,73,5 S 1,5-U 3,5/21,8 6,4 6,5 3,8 14,5 3,74 S 1,5-U 4 1,8 6,5 7,5 3,7 15,4 4,34 S 1,5-U 4/1 1,8 8,5 7,5 3,7 15,4 4,34 S 1,5-U 4/2 1,8 7,5 7,5 3,7 15,4 4,35 S 1,5-U 5 1,8 8,5 7,5 3,7 15,4 5,35 S 1,5-U 5/1 1,8 9,4 7,5 3,7 15,4 5,36 S 1,5-U 6 1,8 9,4 8,1 4,7 17,0 6,46 S 1,5-U 6/1 1,8 12,0 9,2 7,1 20,5 6,48 S 1,5-U 8 1,8 14,0 10,0 6,3 20,5 8,4
10 S 1,5-U 10 1,8 17,5 13,0 7,7 25,0 10,512 S 1,5-U 12 1,8 20,0 15,5 9,0 28,7 13,03 S 2,5-U 3 2,4 5,5 5,5 4,0 13,7 3,23,5 S 2,5-U 3,5 2,4 6,4 6,5 3,8 14,5 3,73,5 S 2,5-U 3,5/12,4 7,2 6,5 3,8 14,5 3,74 S 2,5-U 4 2,4 6,5 7,5 3,7 15,4 4,34 S 2,5-U 4/1 2,4 8,5 7,5 3,7 15,4 4,34 S 2,5-U 4/2 2,4 7,5 7,5 3,7 15,4 4,35 S 2,5-U 5 2,4 8,5 7,5 3,7 15,4 5,36 S 2,5-U 6 2,4 9,4 8,1 4,7 17,0 6,46 S 2,5-U 6/1 2,4 12,0 9,2 7,1 20,5 6,48 S 2,5-U 8 2,4 14,0 10,0 6,3 20,5 8,4
10 S 2,5-U 10 2,4 17,5 13,0 7,7 25,0 10,512 S 2,5-U 12 2,4 20,0 15,5 9,0 28,7 13,0
3,5 S 6-U 3,5 3,6 7,5 8,5 3,9 18,8 3,7
4 S 6-U 4 3,6 7,5 8,0 4,4 18,8 4,3
5 S 6-U 5 3,6 9,5 8,0 4,4 18,8 5,3
6 S 6-U 6 3,6 10,0 11,0 5,5 22,9 6,4
8 S 6-U 8 3,6 15,0 12,0 8,0 26,4 8,4
10 S 6-U 10 3,6 15,5 13,0 8,0 27,4 10,5
10 S 6-U 10/1 3,6 17,5 13,8 7,7 28,0 10,5
12 S 6-U 12 3,6 21,0 15,1 9,5 31,0 13,0
14 S 6-U 14 3,6 23,0 16,1 10,5 33,0 15,0
16 S 6-U 16 3,6 26,0 17,1 11,5 35,0 17,0
7.000/1007.000/1007.000/1007.000/1007.000/1007.000/1007.000/1007.000/1006.000/1006.000/1003.000/1002.500/1002.000/1006.000/1006.000/1006.000/1006.000/1006.000/1006.000/1006.000/1005.000/1004.000/1002.500/1002.000/1002.000/100
3.000/100
3.000/100
2.500/100
2.500/100
2.000/100
2.000/100
2.000/100
1.000/100
1.000/100
1.000/100
*
*
*
*
*
**
*
*
*
*
Cond. Sizesqmm(AWG)
QuantityBox/BagØi
D i m e n s i o n s m m
dLNMBRef.
ØStudmm
0,25÷1,25(22÷16)
1,5÷2,5(16÷14)
4÷6(12÷10)
HydraulicTools
20
A-M series lugs are manu-factured from electrolyticcopper tube.The dimensions of the tubeare designed to obtain themost efficient electricalconductivity and mechani-cal strength to resist vibra-tion and pull out.Cembre lugs are annealedto guarantee optimum duc-tility which is an absolute ne-cessity for connectorswhich will have to withstandthe severe deformationarising when compressedand any bending of the palmduring installation.In applications subject to vi-bration, terminals still haveto perform a reliable con-nection, annealing plays avital role in avoiding crack-ing or breaks between thebarrel and palm.The presence of an inspec-tion hole facilitates full in-sertion of the conductor,whilst the barrel length hasbeen designed to allow easyand accurate positioning ofthe dies during the crimpingoperation.Lugs are electrolytically tin-plated to avoid oxidation. A-M series lugs form an im-portant part of Cembrecrimping systems for pow-er carrying conductors, de-tails of the appropriatecrimping tools and dies areshown opposite and in de-tail on pages 84 to 88,whilst our technicians arealways available to provideany technical advice whichmay be required.The enclosed table is onlyindicative of the range andmany variations in stud fix-ing and palm lengths are al-so available.
A-MCOPPER TUBE CRIMPING LUGS
for copper conductors
3 A 03-M 3 1,8 6,0 4,5 3,5 16,0 3,23,5 A 03-M 3,5 1,8 6,5 4,5 3,5 16,0 3,74 A 03-M 4 1,8 6,5 5,0 4,0 17,0 4,35 A 03-M 5 1,8 7,5 5,5 4,5 18,0 5,36 A 03-M 6 1,8 9,0 6,0 5,0 19,0 6,43 A 06-M 3 2,4 6,0 4,5 3,5 17,0 3,23,5 A 06-M 3,5 2,4 6,5 4,5 3,5 17,0 3,74 A 06-M 4 2,4 7,5 5,0 4,0 18,0 4,35 A 06-M 5 2,4 8,5 5,5 4,5 19,0 5,36 A 06-M 6 2,4 9,0 6,0 5,0 20,0 6,48 A 06-M 8 2,4 12,0 9,0 8,0 26,0 8,43 A 1-M 3 3,6 7,5 4,5 3,5 20,5 3,23,5 A 1-M 3,5 3,6 7,5 4,5 3,5 20,5 3,74 A 1-M 4 3,6 8,0 5,0 4,0 21,5 4,35 A 1-M 5 3,6 9,0 6,5 6,0 25,0 5,36 A 1-M 6 3,6 11,0 7,0 6,0 25,5 6,48 A 1-M 8 3,6 14,0 9,0 8,0 29,5 8,4
10 A 1-M 10 3,6 16,0 11,0 10,0 33,5 10,54 A 2-M 4 4,6 10,0 5,0 4,0 22,5 4,35 A 2-M 5 4,6 10,0 6,5 6,0 26,0 5,36 A 2-M 6 4,6 11,0 7,0 6,0 26,5 6,48 A 2-M 8 4,6 15,0 9,0 8,0 30,5 8,4
10 A 2-M 10 4,6 18,0 11,0 10,0 34,5 10,512 A 2-M 12 4,6 19,0 14,0 12,0 39,5 13,24 A 3-M 4 5,8 11,5 5,0 4,0 25,5 4,35 A 3-M 5 5,8 11,5 6,5 6,0 29,0 5,36 A 3-M 6 5,8 11,5 7,0 6,0 29,5 6,48 A 3-M 8 5,8 15,0 9,0 8,0 33,5 8,4
10 A 3-M 10 5,8 18,0 11,0 10,0 37,5 10,512 A 3-M 12 5,8 20,0 14,0 12,0 42,5 13,24 A 5-M 4 7,0 14,0 5,0 4,0 28,0 4,35 A 5-M 5 7,0 14,0 6,5 6,0 31,5 5,36 A 5-M 6 7,0 14,0 7,0 6,0 32,0 6,48 A 5-M 8 7,0 15,0 9,0 8,0 36,0 8,4
10 A 5-M 10 7,0 18,0 11,0 10,0 40,0 10,512 A 5-M 12 7,0 21,0 14,0 12,0 45,0 13,25 A 7-M 5 8,9 17,0 6,5 6,0 34,0 5,36 A 7-M 6 8,9 17,0 7,0 6,0 34,5 6,48 A 7-M 8 8,9 17,0 9,0 8,0 38,5 8,4
10 A 7-M 10 8,9 19,0 11,0 10,0 42,5 10,512 A 7-M 12 8,9 21,0 14,0 12,0 47,5 13,26 A 10-M 6 10,0 19,0 8,0 7,0 40,5 6,48 A 10-M 8 10,0 19,0 9,0 8,0 42,5 8,4
10 A 10-M 10 10,0 20,0 11,0 10,0 46,5 10,512 A 10-M 12 10,0 21,0 14,0 12,0 51,5 13,214 A 10-M 14 10,0 25,0 16,0 14,0 55,5 15,016 A 10-M 16 10,0 26,0 18,0 16,0 59,5 17,06 A 14-M 6 11,3 21,0 8,0 7,0 44,0 6,48 A 14-M 8 11,3 21,0 9,0 8,0 46,0 8,4
10 A 14-M 10 11,3 21,0 11,0 10,0 50,0 10,512 A 14-M 12 11,3 22,0 14,0 12,0 55,0 13,214 A 14-M 14 11,3 25,0 16,0 14,0 59,0 15,016 A 14-M 16 11,3 26,0 18,0 16,0 63,0 17,0
5.000/1005.000/1005.000/1005.000/1005.000/1004.000/1004.000/1004.000/1004.000/1004.000/1003.000/1002.000/1002.000/1002.000/1002.000/1002.000/1001.500/1001.000/1001.500/1001.500/1001.500/1001.000/1001.000/1001.000/1001.000/1001.000/1001.000/1001.000/100500/100500/100
1.000/100500/100500/100500/100500/100500/100500/100500/100500/100400/100300/50200/50200/50200/50200/50200/50200/50200/50200/50200/50200/50200/50200/50
ØStudmm
QuantityBox/Bag
MechanicalTools
Øi B M N L d
D i m e n s i o n s m mRef.
0,25÷1,5
1,5÷2,5
4÷6
10
16
25
2535 35
3550 50
5070 70
HN 1
HN 5
TN 7
0 SE
HT 4
5-E
HT 5
1
RH 5
0
B 50
TN 1
20 S
E
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
RHU
520
Cond. Sizesqmm
flexiblelow
stranded
21
COPPER TUBE CRIMPING LUGS
for copper conductors A-M
HydraulicTools
6 A 19-M 6 13,5 25,0 8,0 7,0 50,5 6,48 A 19-M 8 13,5 25,0 9,0 8,0 52,5 8,4
10 A 19-M 10 13,5 25,0 11,0 10,0 56,5 10,512 A 19-M 12 13,5 25,0 14,0 12,0 61,5 13,214 A 19-M 14 13,5 25,0 16,0 14,0 65,5 15,016 A 19-M 16 13,5 27,0 18,0 16,0 69,5 17,020 A 19-M 20 13,5 29,5 22,0 20,0 77,5 21,08 A 24-M 8 15,2 28,5 9,0 8,0 54,0 8,4
10 A 24-M 10 15,2 28,5 11,0 10,0 58,0 10,512 A 24-M 12 15,2 28,5 14,0 12,0 63,0 13,214 A 24-M 14 15,2 28,5 16,0 14,0 67,0 15,016 A 24-M 16 15,2 28,5 18,0 16,0 71,0 17,020 A 24-M 20 15,2 30,0 22,0 20,0 79,0 21,08 A 30-M 8 16,7 31,5 13,0 11,0 69,0 8,4
10 A 30-M 10 16,7 31,5 13,0 11,0 69,0 10,512 A 30-M 12 16,7 31,5 16,0 14,0 75,0 13,214 A 30-M 14 16,7 31,5 18,0 16,0 79,0 15,016 A 30-M 16 16,7 31,5 19,0 17,0 81,0 17,020 A 30-M 20 16,7 31,5 22,0 20,0 87,0 21,08 A 37-M 8 19,2 35,5 13,0 11,0 76,0 8,4
10 A 37-M 10 19,2 35,5 13,0 11,0 76,0 10,512 A 37-M 12 19,2 35,5 16,0 14,0 82,0 13,214 A 37-M 14 19,2 35,5 18,0 16,0 86,0 15,016 A 37-M 16 19,2 35,5 19,0 17,0 88,0 17,020 A 37-M 20 19,2 35,5 22,0 20,0 94,0 21,08 A 48-M 8 21,1 39,0 13,0 11,0 82,0 8,4
10 A 48-M 10 21,1 39,0 13,0 11,0 82,0 10,512 A 48-M 12 21,1 39,0 16,0 14,0 88,0 13,214 A 48-M 14 21,1 39,0 18,0 16,0 92,0 15,016 A 48-M 16 21,1 39,0 19,0 17,0 94,0 17,020 A 48-M 20 21,1 39,0 22,0 20,0 100,0 21,010 A 60-M 10 23,7 44,0 20,0 11,0 96,0 10,512 A 60-M 12 23,7 44,0 20,0 14,0 99,0 13,214 A 60-M 14 23,7 44,0 22,0 16,0 103,0 15,016 A 60-M 16 23,7 44,0 22,0 19,0 106,0 17,020 A 60-M 20 23,7 44,0 24,0 23,0 112,0 21,012 A 80-M 12 27,0 51,0 22,0 19,0 113,0 13,214 A 80-M 14 27,0 51,0 22,0 19,0 113,0 15,016 A 80-M 16 27,0 51,0 22,0 19,0 113,0 17,020 A 80-M 20 27,0 51,0 24,0 23,0 119,0 21,016 A 100-M 16 30,3 56,5 22,0 19,0 117,0 17,020 A 100-M 20 30,3 56,5 24,0 23,0 123,0 21,016 A 120-M 16 33,4 61,6 22,0 19,0 128,0 17,020 A 120-M 20 33,4 61,6 24,0 23,0 134,0 21,016 A 160-M 16 38,0 72,0 24,0 19,0 141,0 17,020 A 160-M 20 38,0 72,0 24,0 23,0 145,0 21,016 A 200-M 16 44,0 80,0 24,0 19,0 158,0 17,020 A 200-M 20 44,0 80,0 24,0 23,0 162,0 21,0
100/25100/25100/25100/25100/25100/25100/25100/25100/25100/25100/25100/2550/2550/2550/2550/2550/2550/2550/2550/2550/2550/2550/2530/1530/1530/1530/1530/1530/1530/1530/1520/1020/1020/1020/1020/1020/520/520/520/515/515/512/612/69/39/36/26/2
Cond. Sizesqmm
ØStudmm
QuantityBox/Bag
MechanicalTools
Øi B M N L d
D i m e n s i o n s m mRef.
7095 95
95120 120
120150 150
150185 185
185240 240
300 240
400 300
500 400
630 500
800 630
1000 800
TN 1
20 S
EHT
45-
EHT
51
RH
50
B
50HT
81-
U
RHU
81HT
120
and
tool
s an
d he
ads
with
130
kN
crim
ping
forc
eEC
W-H
3DRH
U 52
0
flexiblelow
stranded
5 A 2-M 5/9 4,6 9,0 6,5 6,0 26,0 5,35 A 3-M 5/9 5,8 9,0 6,5 6,0 29,0 5,35 A 5-M 5/9 7,0 9,0 6,5 6,0 31,5 5,36 A 7 B-M 6/11,5 8,9 11,5 8,0 7,0 36,5 6,46 A 10 B-M 6/11,5 10,0 11,5 8,0 7,0 40,5 6,46 A 14 B-M 6/11,5 11,3 11,5 8,0 7,0 44,0 6,48 A 19 B-M 8/15,5 13,5 15,5 9,0 8,0 52,5 8,48 A 24 B-M 8/19 15,2 19,0 14,0 9,0 60,0 8,4
10 A 24 B-M 10/19 15,2 19,0 14,0 9,0 60,0 10,58 A 30 B-M 8/19 16,7 19,0 18,0 9,0 70,0 8,4
10 A 30 B-M 10/19 16,7 19,0 18,0 9,0 70,0 10,510 A 37 B-M 10/24,5 19,2 24,5 18,0 9,0 77,0 10,510 A 48-M 10/31 21,1 31,0 13,0 9,0 80,0 10,512 A 48-M 12/31 21,1 31,0 16,0 12,0 86,0 13,216 A 48-M 16/31 21,1 31,0 19,0 17,0 94,0 17,012 A 60 B-M 12/31 23,7 31,0 16,0 12,0 95,0 13,2
1500/1001000/100500/100400/100200/50200/50100/25100/25100/2550/2550/2550/2530/1530/1530/1520/10
HydraulicTools
22
This range of lugs featurescontained palm width.Our lugs have been specifi-cally developed for applica-tion on L.V. circuit breakerswith reduced space termi-nal blocks. In fact the con-tained palm width allows animmediate and easier in-stallation. Our lugs aremanufactured from elec-trolytic copper tube. The specifically designedsection of the barrel andthe choice of principal di-mensions are optimisingthe best combination ofmechanical strength andelectrical conductivity.Our lugs are annealed toguarantee optimum ductili-ty and are electrolyticallytin-plated to avoid oxida-tion.The barrel is provided withan internal taper to easethe introduction of the con-ductor; furthermore, itslength grants a comfort-able and correct position-ing between dies, duringcrimping operations.Each lug palm is markedwith the Cembre logo andpart number.
A-M
ØStudmm
QuantityBox/Bag
MechanicalTools
Øi B M N L d
D i m e n s i o n s m mRef.
35251610
507095
120
150
185
240
300
Conductor Size
Flexiblesqmm
TN 7
0 SE
TN 1
20 S
EHT
45-
EHT
51
RH
50
B
50HT
81-
U
RHU
81
HT 1
20 a
nd to
ols
and
head
s wi
th
130
kN c
rimpi
ng fo
rce
ECW
-H3D
RING TONGUE TERMINALS WITH CONTAINED PALM
for L.V. circuit breakersfor copper conductors
0,25÷1,5 0,25÷1,5 L 03-M 1,8 151,5÷2,5 1,5÷2,5 L 06-M 2,4 15
4÷6 4÷6 L 1-M 3,6 2210 10 L 2-M 4,6 2516 16 L 3-M 5,8 2725 25 L 5-M 7,0 2935 25÷35 L 7-M 8,9 3350 35÷50 L 10-M 10,0 3770 50÷70 L 14-M 11,3 3995 70÷95 L 19-M 13,5 43120 95÷120 L 24-M 15,2 47150 120÷150 L 30-M 16,7 58185 150÷185 L 37-M 19,2 64240 185÷240 L 48-M 21,1 75300 240 L 60-M 23,7 90400 300 L 80-M 27,0 94500 400 L 100-M 30,3 98
600÷630 500 L 120-M 33,4 105800 600 L 160-M 38,0 112
1000 800 L 200-M 44,0 120
6.000/1004.000/1002.000/1001.500/1001.000/100500/100400/100300/50200/50150/25100/2550/2550/2530/1520/1020/512/612/69/39/3
23
THROUGH CONNECTORS
L-M
L-M range of connectorsare designed for jointing lowvoltage conductors.Made of electrolytic coppertube having the same di-mension as A-M serieslugs: L-M connectors areannealed and electrolytical-ly tin plated.They feature an internal ta-per at both ends to easethe introduction of the con-ductor and a central stop toensure correct positioning.
HydraulicTools
QuantityBox/Bag
MechanicalTools
Øi L
D i m e n s i o n s m mRef.
Conductor Sizesqmm
low stranded Flexible
TN 7
0 SE
TN 1
20 S
E
HT 5
1
RH 5
0
B 50
HT 4
5-E
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th
130
kN c
rimpi
ng fo
rce
RHU
520
ECW
-H3D
HN 5
HN 1
0,25÷1,5 0,25÷1,5 L 03-P 1,8 6,01,5÷2,5 1,5÷2,5 L 06-P 2,4 6,0
4÷6 4÷6 L 1-P 3,6 9,010 10 L 2-P 4,6 10,516 16 L 3-P 5,8 11,525 25 L 5-P 7,0 13,035 25÷35 L 7-P 8,9 14,050 35÷50 L 10-P 10,0 16,070 50÷70 L 14-P 11,3 18,095 70÷95 L 19-P 13,5 19,0120 95÷120 L 24-P 15,2 22,0150 120÷150 L 30-P 16,7 26,5185 150÷185 L 37-P 19,2 26,5240 185÷240 L 48-P 21,1 34,0
10.000/1005.000/1003.000/1003.000/1002.000/1001.500/1001.000/100500/100500/100300/50200/50100/50100/5060/15
PARALLEL CONNECTORS
L-P
Made of electrolytic coppertube, having the same di-mensions as A-M serieslugs, L-P connectors areannealed and electrolytical-ly tin plated.They feature an internal ta-per to ease the introduc-tion of the conductor.
HydraulicTools
QuantityBox/Bag
MechanicalTools
Øi L
D i m e n s i o n s m mRef.
Conductor Sizesqmm
low stranded Flexible
TN 7
OSE
TN 1
20 S
E
HT 5
1
RH 5
0
B 50
HT 4
5-E
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th
130
kN c
rimpi
ng fo
rce
RHU
520
ECW
-H3D
HN 5
HN 1
HydraulicTools
24
ANE-M series terminals aremanufactured from elec-trolytic copper tube annealedand tin plated.The interior of the Nylon in-sulation sleeve is funnelshaped so as to ensure com-plete and easy introduction ofthe conductor strands.The Nylon insulated sleeveeliminates the need to insu-late the terminal by eithertaping or using heat shrink-able tubes.Furthermore the Nylonsleeve avoids the possibility ofconductor breakage at thebarrel entrance.The items tabulated all fea-ture black insulated sleeves,other coloured sleeves areavailable against specific re-quest.In order to achieve the bestelectrical and mechanicalperformance it is suggestedthat they are crimped usingdies and tools specifically de-veloped for this purpose byCembre.
ANE-MNYLON INSULATED COPPER TUBE LUGS
4 ANE 2-M 4 8,0 10,0 5,0 4,0 34,1 4,35 ANE 2-M 5 8,0 10,0 6,5 6,0 37,6 5,36 ANE 2-M 6 8,0 11,0 7,0 6,0 38,1 6,48 ANE 2-M 8 8,0 15,0 9,0 8,0 42,1 8,4
10 ANE 2-M 10 8,0 18,0 11,0 10,0 46,1 10,512 ANE 2-M 12 8,0 19,0 14,0 12,0 51,1 13,24 ANE 3-M 4 9,2 11,5 5,0 4,0 38,6 4,35 ANE 3-M 5 9,2 11,5 6,5 6,0 42,1 5,36 ANE 3-M 6 9,2 11,5 7,0 6,0 42,6 6,48 ANE 3-M 8 9,2 15,0 9,0 8,0 46,6 8,4
10 ANE 3-M 10 9,2 18,0 11,0 10,0 50,6 10,512 ANE 3-M 12 9,2 20,0 14,0 12,0 55,6 13,24 ANE 5-M 4 11,1 14,0 5,0 4,0 41,0 4,35 ANE 5-M 5 11,1 14,0 6,5 6,0 44,5 5,36 ANE 5-M 6 11,1 14,0 7,0 6,0 45,0 6,48 ANE 5-M 8 11,1 15,0 9,0 8,0 49,0 8,4
10 ANE 5-M 10 11,1 18,0 11,0 10,0 53,0 10,512 ANE 5-M 12 11,1 21,0 14,0 12,0 58,0 13,26 ANE 9-M 6/15 13,6 15,0 8,0 7,0 54,0 6,48 ANE 9-M 8 13,6 17,0 9,0 8,0 56,0 8,4
10 ANE 9-M 10 13,6 18,5 11,0 10,0 60,0 10,512 ANE 9-M 12 13,6 21,0 14,0 12,0 65,0 13,26 ANE 12-M 6/15 15,7 15,0 8,0 7,0 59,5 6,48 ANE 12-M 8 15,7 19,8 9,0 8,0 61,5 8,4
10 ANE 12-M 10 15,7 19,8 11,0 10,0 65,5 10,510 ANE 12-M 10/19 15,7 19,0 11,0 10,0 65,5 10,512 ANE 12-M 12 15,7 22,0 14,0 12,0 70,5 13,26 ANE 17-M 6 17,9 23,0 8,0 7,0 63,8 6,48 ANE 17-M 8 17,9 23,0 9,0 8,0 65,8 8,4
10 ANE 17-M 10 17,9 23,0 11,0 10,0 69,8 10,510 ANE 17-M 10/19 17,9 19,0 11,0 10,0 69,8 10,512 ANE 17-M 12 17,9 23,0 14,0 12,0 74,8 13,214 ANE 17-M 14 17,9 25,0 15,5 12,0 76,3 15,016 ANE 17-M 16 17,9 27,0 16,5 13,5 78,8 17,08 ANE 20-M 8 20,0 27,0 9,0 8,0 70,6 8,4
10 ANE 20-M 10 20,0 27,0 11,0 10,0 74,6 10,512 ANE 20-M 12 20,0 27,0 14,0 12,0 79,6 13,214 ANE 20-M 14 20,0 27,0 15,5 12,0 81,1 15,016 ANE 20-M 16 20,0 27,0 16,5 13,5 83,6 17,010 ANE 29-M 10 22,4 30,0 11,0 10,0 81,5 10,512 ANE 29-M 12 22,4 30,0 14,0 12,0 86,5 13,214 ANE 29-M 14 22,4 30,0 15,5 12,0 88,5 15,016 ANE 29-M 16 22,4 30,0 16,5 13,5 90,5 17,020 ANE 29-M 20 22,4 30,0 22,0 20,0 102,5 21,012 ANE 35-M 12 25,0 34,2 16,0 14,0 95,0 13,214 ANE 35-M 14 25,0 34,2 18,0 16,0 99,0 15,016 ANE 35-M 16 25,0 34,2 19,0 17,0 101,0 17,020 ANE 35-M 20 25,0 34,2 22,0 20,0 107,0 21,0
500/100500/100500/100500/100500/100500/100500/100500/100500/100500/100500/100300/100300/100300/100300/100300/100300/100300/100200/50200/50200/50200/50100/25100/25100/25100/25100/25100/25100/25100/25100/25100/25100/25100/2550/2550/2550/2550/2550/2550/2550/2550/2550/2550/2530/1530/1530/1530/15
ØStudmm
QuantityBox/Bag
MechanicalTools
Ø B M N L d
D i m e n s i o n s m mRef.
10
16
25
35
50
70
95
120
150
Conductor SizeFlexiblesqmm
HNN
3
HNN
4
TNN
70
TNN
120
HT 5
1
RH
50
B 50
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
25
COPPER TUBE CRIMPING LUGS
for flexible copper conductors A-M
A-M series lugs are de-signed to suit panel appli-cations.The dimensions of the tubeare designed to obtain themost efficient electricalconductivity and mechani-cal strength to resist vibra-tion and pull out. Cembre lugs are annealedto guarantee optimum duc-tility and electrolytically tinplated to avoid oxidation.The presence of an inspec-tion hole facilitates full in-sertion of the conductor.
A-M lugs type A 2, A 3, A 5can be used on low strand-ed conductors.
HydraulicTools
4 A 2-M 4 4,6 10,0 5,0 4,0 22,5 4,35 A 2-M 5 4,6 10,0 6,5 6,0 26,0 5,36 A 2-M 6 4,6 11,0 7,0 6,0 26,5 6,48 A 2-M 8 4,6 15,0 9,0 8,0 30,5 8,4
10 A 2-M 10 4,6 18,0 11,0 10,0 34,5 10,512 A 2-M 12 4,6 19,0 14,0 12,0 39,5 13,24 A 3-M 4 5,8 11,5 5,0 4,0 25,5 4,35 A 3-M 5 5,8 11,5 6,5 6,0 29,0 5,36 A 3-M 6 5,8 11,5 7,0 6,0 29,5 6,48 A 3-M 8 5,8 15,0 9,0 8,0 33,5 8,4
10 A 3-M 10 5,8 18,0 11,0 10,0 37,5 10,512 A 3-M 12 5,8 20,0 14,0 12,0 42,5 13,24 A 5-M 4 7,0 14,0 5,0 4,0 28,0 4,35 A 5-M 5 7,0 14,0 6,5 6,0 31,5 5,36 A 5-M 6 7,0 14,0 7,0 6,0 32,0 6,48 A 5-M 8 7,0 15,0 9,0 8,0 36,0 8,4
10 A 5-M 10 7,0 18,0 11,0 10,0 40,0 10,512 A 5-M 12 7,0 21,0 14,0 12,0 45,0 13,26 A 9-M 6/15 9,3 15,0 8,0 7,0 38,5 6,48 A 9-M 8 9,3 17,0 9,0 8,0 40,5 8,4
10 A 9-M 10 9,3 18,5 11,0 10,0 44,5 10,512 A 9-M 12 9,3 21,0 14,0 12,0 49,5 13,26 A 12-M 6/15 11,0 15,0 8,0 7,0 40,5 6,48 A 12-M 8 11,0 19,8 9,0 8,0 42,5 8,4
10 A 12-M 10 11,0 19,8 11,0 10,0 46,5 10,510 A 12-M 10/19 11,0 19,0 11,0 10,0 46,5 10,512 A 12-M 12 11,0 22,0 14,0 12,0 51,5 13,26 A 17-M 6 13,0 23,0 8,0 7,0 45,0 6,48 A 17-M 8 13,0 23,0 9,0 8,0 47,0 8,4
10 A 17-M 10 13,0 23,0 11,0 10,0 51,0 10,510 A 17-M 10/19 13,0 19,0 11,0 10,0 51,0 10,512 A 17-M 12 13,0 23,0 14,0 12,0 56,0 13,214 A 17-M 14 13,0 25,0 15,5 12,0 57,5 15,016 A 17-M 16 13,0 27,0 16,5 13,5 60,0 17,08 A 20-M 8 15,0 27,0 9,0 8,0 50,0 8,4
10 A 20-M 10 15,0 27,0 11,0 10,0 54,0 10,512 A 20-M 12 15,0 27,0 14,0 12,0 59,0 13,214 A 20-M 14 15,0 27,0 15,5 12,0 60,5 15,016 A 20-M 16 15,0 27,0 16,5 13,5 63,0 17,08 A 29-M 8 16,5 30,0 9,0 8,0 53,5 8,4
10 A 29-M 10 16,5 30,0 11,0 10,0 57,5 10,512 A 29-M 12 16,5 30,0 14,0 12,0 62,5 13,214 A 29-M 14 16,5 30,0 15,5 12,0 64,0 15,016 A 29-M 16 16,5 30,0 16,5 13,5 66,5 17,020 A 29-M 20 16,5 30,0 22,0 20,0 78,5 21,010 A 35-M 10 19,2 34,2 13,0 11,0 65,5 10,512 A 35-M 12 19,2 34,2 16,0 14,0 71,5 13,214 A 35-M 14 19,2 34,2 18,0 16,0 75,5 15,016 A 35-M 16 19,2 34,2 19,0 17,0 77,5 17,020 A 35-M 20 19,2 34,2 22,0 20,0 83,5 21,010 A 40-M 10 21,0 37,5 13,0 11,0 73,0 10,512 A 40-M 12 21,0 37,5 16,0 14,0 79,0 13,214 A 40-M 14 21,0 37,5 18,0 16,0 83,0 15,016 A 40-M 16 21,0 37,5 19,0 17,0 85,0 17,020 A 40-M 20 21,0 37,5 22,0 20,0 91,0 21,0
1.500/1001.500/1001.500/1001.000/1001.000/1001.000/1001.000/1001.000/1001.000/1001.000/100500/100500/100
1.000/100500/100500/100500/100500/100500/100500/100400/100400/100300/50200/50200/50200/50200/50200/50200/50200/50200/50200/50150/50150/25150/25100/25100/25100/25100/25100/25100/25100/25100/25100/25100/2575/2550/2550/2550/2550/2550/2550/2550/2550/2550/2550/25
Cond. SizeFlexiblesqmm
ØStudmm
QuantityBox/Bag
MechanicalTools
Øi B M N L d
D i m e n s i o n s m mRef.
TN 1
20 S
EHT
45-
EHT
51
RH 5
0
B
50HT
81-
U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
RHU
520
TN 7
0 SE
HN 5
HN 110
16
25
35
50
70
95
120
150
185
HydraulicTools
26
ANE-P series terminals aremade from electrolytic cop-per, rolled, tin plated andbrazed. The interior of theNylon insulation sleeve is fun-nel shaped so as to ensurecomplete and easy introduc-tion of the conductorstrands.In order to achieve the bestelectrical and mechanicalperformance it is suggestedthat they are crimped usingdies and tools specifically de-veloped for this purpose byCembre.
ANE-PNYLON INSULATED PIN TERMINALS
10 ANE 2-P 12 8,0 4,3 14,5 35,116 ANE 3-P 14 9,2 5,5 18,0 41,125 ANE 5-P 16 11,1 7,0 20,3 45,035 ANE 7-P 20 13,6 8,0 24,5 55,0
1.000/100500/100300/100200/50
QuantityBox/Bag
Mechanical Tools
Ø B P L
D i m e n s i o n s m mRef.
Conductor SizeFlexiblesqmm
TNN
120
TNN
70 HNN 3
HNN 4
HT 5
1
RH
50B
50
HT 1
20
and
tool
s an
d he
ads
with
130
kN
crim
ping
forc
e
ECW
-H3D
HydraulicTools
A-P series pin connectorsare designed to terminateconductors into contactblocks. They are manufacturedfrom copper strip, rolled,brazed and tin plated.
A-PUNINSULATED PIN CONNECTORS
10 A 2-P 12 4,8 4,3 14,5 23,516 A 3-P 14 5,9 5,5 18,0 28,025 A 5-P 16 7,0 7,0 20,3 32,035 A 7-P 20 8,9 8,0 24,5 39,050 A 10-P 25 10,0 9,5 26,0 45,070 A 14-P 30 11,5 11,0 31,0 55,0
2.000/1001.500/1001.000/100500/100250/50200/50
QuantityBox/Bag
MechanicalTools
Øi B P L
D i m e n s i o n s m mRef.Conductor Size
sqmm
TN 1
20 S
ETN
70
SEHN
5HN 1
HT 4
5-E
HT 5
1 R
H 50
B
50
HT 1
20
and
tool
s an
d he
ads
with
130
kN
crim
ping
forc
e
ECW
-H3D
27
NYLON INSULATED FORK TERMINALS
ANE-U
HydraulicTools
4 ANE 2-U 4 8,0 9,8 7,5 7 35,1 4,35 ANE 2-U 5 8,0 11,5 7,5 7 35,1 5,34 ANE 3-U 4 9,2 10,0 10,0 8 41,1 4,35 ANE 3-U 5 9,2 11,5 10,0 8 41,1 5,3
500/100500/100500/100500/100
Conductor SizeFlexiblesqmm
ØStudmm
QuantityBox/Bag
MechanicalTools
Ø B M N L d
D i m e n s i o n s m mRef.
TNN
120
HT 5
1RH
50
B 5
0
HT 1
20
and
tool
s an
d he
ads
with
130
kN
crim
ping
forc
e
ECW
-H3D
TNN
70
HNN
4HNN
3
10
16
ANE-U series terminals aremade from electrolytic cop-per, rolled, tin plated andbrazed. The interior of theNylon insulated sleeve is fun-nel shaped so as to ensurecomplete and easy intro-duction of the conductorstrands.In order to achieve the bestelectrical and mechanicalperformance it is suggestedthat they are crimped usingdies and tools specifically de-veloped for this purpose byCembre.
FLEXIBLE BRAIDS
FL
8 FL 10-150 17 10 150 8,58 FL 10-200 17 10 200 8,58 FL 10-250 17 10 250 8,58 FL 16-150 17 10 150 8,58 FL 16-200 17 10 200 8,58 FL 16-250 17 10 250 8,58 FL 16-320 17 10 320 8,58 FL 16-350 17 10 350 8,58 FL 16-420 17 10 420 8,58 FL 16-570 17 10 570 8,58 FL 16-660 17 10 660 8,58 FL 25-150 21 10 150 8,58 FL 25-200 21 10 200 8,58 FL 25-250 21 10 250 8,58 FL 25-300 21 10 300 8,5
300/50150/5050/50
300/50150/5050/5050/5050/5025/2525/2525/25
200/50100/5050/5050/50
Sizesqmm
ØStudmm
QuantityBox/BagB N L d
D i m e n s i o n s m mRef.
10
16
25
Flexible braids can be sup-plied tin plated, in this caseadd the suffix “ST” to refer-ence.E.g.: - FL 10-150 (Bright copper)- FL 10-150-ST (Tin plated)
Flexible braids are manufac-tured from electrolytic cop-per wire.Braids of different conduc-tor sizes or lengths are avail-able on request.Standard finish - bright cop-per.
28
A-4ESI series lugs aremade from high purity elec-trolytic copper tube, an-nealed and tin plated.The four hole stud fixing inaccordance with E.A. spec-ifications ensure compati-bility with most trans-former fixing arrange-ments.
A-4ESICOPPER TUBE LUGS 4-ESI FIXING
HydraulicTools
185 A 37-4ESI 19,2 61 20 15 124
240 A 48-4ESI 21,1 61 20 15 128
300 A 60-4ESI 27,3 61 20 15 133
400 A 80-4ESI 27,0 61 20 15 134
500 A 100-4ESI 30,3 61 20 15 139
630 A 120-4ESI 33,4 61 20 15 144
800 A 160-4ESI 38,0 61 20 15 158
20/10
20/10
20/10
15/5
10/5
10/5
8/4
QuantityBox/BagØi B M N L
D i m e n s i o n s m mRef.Conductor Size
sqmm
ECW
-H3D
RHU
520
HT 8
1-U
RHU
81
HT 1
20 a
nd to
ols
and
head
swi
th 1
30 k
N cr
impi
ng fo
rce
HT 51RH 50B 50
29
HEAVY DUTY COPPER TUBE TERMINALS
2A-M
2A-M series are made fromhigh purity copper tube, andare annealed. They feature adouble length barrel for en-hanced electrical and me-chanical performance inheavy duty applications.The absence of an inspec-tion hole prevents the entryof water or moisture into thecrimped joint making theseterminals suitable for out-door applications.The terminals are electrolyt-ically tin plated to prevent at-mospheric corrosion.2A-2M series terminals withdouble stud hole palm areavailable against specific re-quirements.
HydraulicTools
8 2 A 3-M 8 5,8 15,0 9 8 43,5 8,410 2 A 3-M10 5,8 18,0 11 10 47,5 10,58 2 A 5-M 8 7,0 15,0 9 8 51,0 8,4
10 2 A 5-M 10 7,0 18,0 11 10 55,0 10,512 2 A 5-M 12 7,0 21,0 14 12 60,0 13,28 2 A 7-M 8 8,9 17,0 9 8 53,0 8,4
10 2 A 7-M 10 8,9 19,0 11 10 57,0 10,512 2 A 7-M 12 8,9 21,0 14 12 62,0 13,210 2 A 10-M 10 10,0 20,0 11 10 63,0 10,512 2 A 10-M 12 10,0 21,0 14 12 68,0 13,214 2 A 10-M 14 10,0 25,0 16 14 72,0 15,016 2 A 10-M 16 10,0 26,0 18 16 76,0 17,010 2 A 14-M 10 11,3 21,0 11 10 70,0 10,512 2 A 14-M 12 11,3 22,0 14 12 75,0 13,214 2 A 14-M 14 11,3 25,0 16 14 79,0 15,016 2 A 14-M 16 11,3 26,0 18 16 83,0 17,010 2 A 19-M 10 13,5 25,0 11 10 76,5 10,512 2 A 19-M 12 13,5 25,0 14 12 81,5 13,214 2 A 19-M 14 13,5 25,0 16 14 85,5 15,016 2 A 19-M 16 13,5 27,0 18 16 90,5 17,020 2 A 19-M 20 13,5 29,5 22 20 97,5 21,010 2 A 24-M 10 15,2 28,5 11 10 82,0 10,512 2 A 24-M 12 15,2 28,5 14 12 87,0 13,214 2 A 24-M 14 15,2 28,5 16 14 91,0 15,016 2 A 24-M 16 15,2 28,5 18 16 95,0 17,020 2 A 24-M 20 15,2 30,0 22 20 103,0 21,010 2 A 30-M 10 16,7 31,5 13 11 92,0 10,512 2 A 30-M 12 16,7 31,5 16 14 98,0 13,214 2 A 30-M 14 16,7 31,5 18 16 102,0 15,016 2 A 30-M 16 16,7 31,5 19 17 104,0 17,020 2 A 30-M 20 16,7 31,5 22 20 110,0 21,012 2 A 37-M 12 19,2 35,5 16 14 108,0 13,214 2 A 37-M 14 19,2 35,5 18 16 112,0 15,016 2 A 37-M 16 19,2 35,5 19 17 114,0 17,020 2 A 37-M 20 19,2 35,5 22 20 120,0 21,012 2 A 48-M 12 21,1 39,0 16 14 109,0 13,214 2 A 48-M 14 21,1 39,0 18 16 113,0 15,016 2 A 48-M 16 21,1 39,0 19 17 115,0 17,020 2 A 48-M 20 21,1 39,0 22 20 121,0 21,012 2 A 60-M 12 23,7 44,0 20 14 129,5 13,214 2 A 60-M 14 23,7 44,0 22 16 133,5 15,016 2 A 60-M 16 23,7 44,0 22 19 136,5 17,020 2 A 60-M 20 23,7 44,0 24 23 142,5 21,012 2 A 80-M 12 27,0 51,0 22 19 140,0 13,214 2 A 80-M 14 27,0 51,0 22 19 140,0 15,016 2 A 80-M 16 27,0 51,0 22 19 140,0 17,020 2 A 80-M 20 27,0 51,0 24 23 146,0 21,016 2 A 100-M 16 30,3 56,5 22 19 147,0 17,020 2 A 100-M 20 30,3 56,5 24 23 153,0 21,016 2 A 120-M 16 33,4 61,5 22 19 159,0 17,020 2 A 120-M 20 33,4 61,5 24 23 165,0 21,020 2 A 160-M 20 38,0 72,0 24 23 187,0 21,020 2 A 200-M 20 44,0 80,0 24 23 202,0 21,0
600/100500/100500/100300/50300/50250/50250/50250/50200/50200/50150/50150/50100/50100/50100/50100/5075/2575/2575/2575/2575/2550/2550/2550/2550/2550/2550/2550/2530/1530/1530/1530/1530/1530/1530/1525/525/525/525/520/520/520/520/515/515/515/515/510/510/520/520/512/36/2
Conductor Size
sqmm
ØStudmm
QuantityBox/Bag
MechanicalTools
Øi B M N L d
D i m e n s i o n s m mRef.
16
25
35
50
6370
95
120125
150
185
240
300
400
500
600÷630
8001000
TN 1
20 S
EHT
45-
EHT
51
RH
50
B
50HT
81-
U
RHU
81HT
120
and
tool
s an
d he
ads
with
130
kN
crim
ping
forc
eEC
W-H
3DRH
U 52
0
TN 7
0 SE
HN 5
30
“C” connectors are manu-factured from high puritycopper profiles and are suit-able for a variety of uses ei-ther to create an earthingnetwork or tapping off fromoverhead distribution lines.Each connector is markedas follows:- Cembre trade mark- Reference number- Conductor size-Run- Conductor size-Tap- Number of crimps- Die reference.
CSLEEVE CONNECTORS
Tin plated version
Example of tap connection
Example of joining two running conductors
Example of joint connection
Ref.Conductor Sizesqmm
HydraulicTools
6÷2,5 6÷1,5 C 6-C 6 ST 9,0 9,8 6,410 10÷1,5 C 10-C 10 ST 12,0 12,6 8,416 16÷1,5 C 16-C 16 ST 17,0 19,4 12,0
25÷16 10÷1,5 C 25-C 10 ST 17,0 19,8 13,025 25÷16 C 25-C 25 ST 17,0 21,4 13,0
40÷35 16÷1,5 C 35-C 16 ST 21,0 24,6 15,440÷35 40÷25 C 35-C 35 ST 21,0 26,6 15,6
50 25÷1050 25÷4 C 50-C 25 ST 25,0 32,9 21,050 50÷35 C 50-C 50 ST 26,0 33,0 21,0
70÷63 25÷1,5 C 70-C 25 N ST 21,0 26,4 17,570÷50 40÷4 C 70-C 35 ST 28,0 33,0 21,070÷50 70÷35 C 70-C 70 ST 28,0 34,0 21,0100÷95 40÷4 C 95-C 35 ST 29,0 40,6 26,0100÷95 70÷40 C 95-C 70 ST 29,0 41,0 26,0100÷95 100÷63 C 95-C 95 ST 29,0 41,0 26,0
125÷110 125÷25 C 120-C 120 ST 30,0 45,0 28,0160÷150 125÷25 C 150-C 120 ST 31,0 45,0 28,0
150 150÷63 C 150-C 150 ST 30,0 45,0 28,0185 100÷16 C 185-C 95 ST 31,0 45,0 28,0
185÷120 185÷120 C 185-C 185 ST 22,6 68,0 34,0240÷150 120÷95 C 240-C 120 ST 22,6 68,0 34,0
100100100505025
25
2525252525252525252525251515
QuantityBox/BagA B C
D i m e n s i o n s m mRef.
Conductor Sizesqmm
Run Tap
HT 4
5-E
HT 5
1
RH
50
B
50
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
25-25 C 35-C 16 ST35-35 C 35-C 35 ST50-50 C 70-C 70 ST63-63 C 95-C 70 ST70-7095-95 C 150-C 120 ST
120-120125-125 C 150-C 150120-120 C 185-C 95 ST125-125
31
SLEEVE CONNECTORS
Bright surface version C
Featuring same characteris-tics of tin plated version,(see opposite page).
HydraulicTools
6÷2,5 6÷1,5 C 6-C 6 9,0 9,8 6,410 10÷1,5 C 10-C 10 12,0 12,6 8,416 16÷1,5 C 16-C 16 17,0 19,4 12,0
25÷16 10÷1,5 C 25-C 10 17,0 19,8 13,025 25÷16 C 25-C 25 17,0 21,4 13,0
40÷35 16÷1,5 C 35-C 16 21,0 24,6 15,440÷35 40÷25 C 35-C 35 21,0 26,6 15,6
50 25÷1050 25÷4 C 50-C 25 25,0 32,9 21,050 50÷35 C 50-C 50 26,0 33,0 21,0
70÷63 25÷1,5 C 70-C 25 N 21,0 26,4 17,570÷50 40÷4 C 70-C 35 28,0 33,0 21,070÷50 70÷35 C 70-C 70 28,0 34,0 21,0100÷95 40÷4 C 95-C 35 29,0 40,6 26,0100÷95 70÷40 C 95-C 70 29,0 41,0 26,0100÷95 100÷63 C 95-C 95 29,0 41,0 26,0
125÷110 125÷25 C 120-C 120 30,0 45,0 28,0160÷150 125÷25 C 150-C 120 31,0 45,0 28,0
150 150÷63 C 150-C 150 30,0 45,0 28,0185 100÷16 C 185-C 95 31,0 45,0 28,0
185÷120 185÷120 C 185-C 185 22,6 68,0 34,0240÷150 120÷95 C 240-C 120 22,6 68,0 34,0
100100100505025
25
25252525252525252525252515 15
QuantityBox/BagA B C
D i m e n s i o n s m mRef.
Conductor Sizesqmm
Run Tap
HT 4
5-E
HT 5
1
RH
50
B
50
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
32
Material:Brass OT 58 UNI 5705nickel-plated.Zinc plated steel bolts.
MECHANICAL FIXING LUGS
16 2171 M10 18,0 4,5 12,5 4025 2172 M10 19,5 6,0 13,0 4335 2173 M14 23,0 7,0 15,0 4950 2174 M14 25,0 8,0 17,0 56
16 2155 M8 18,0 4,5 12,5 4025 2156 M8 19,5 6,0 13,0 4335 2157 M12 23,0 7,0 15,0 49
10010050
Conductor Sizesqmm
Abolt Quantity
B C D L
D i m e n s i o n s m m
50 2158 M12 23,5 8 16,0 5775 2160 M12 28,0 10 20,0 65
100 2161 M12 31,0 13 17,0 66125 2162 M15 33,0 14 18,0 71150 2163 M14 34,0 16 19,5 75175 2164 M15 36,0 16 21,0 78200 2165 M16 38,5 18 23,0 84300 2167 M20 46,0 23 28,0 103
502525252525105
Conductor Sizesqmm
Abolt Quantity
B C D L
D i m e n s i o n s m m
1001005050
Conductor Sizesqmm
Abolt Quantity
B C D L
D i m e n s i o n s m m
75 2176 M16 28 10 20 65 25
Conductor Sizesqmm
Abolt Quantity
B C D L
D i m e n s i o n s m m
2 bolt fixing lugs Ø A standard
4 bolt fixing lugs Ø A standard
2 bolt fixing lugs Ø A large
4 bolt fixing lugs Ø A large
Ref.
Ref.
Ref.
Ref.
33
CABLE CLAMPS
Material:Brass OT 58 UNI 5705.Zinc plated steel bolts.Zinc plated steel nut.6÷16 2323 3÷ 5 24 20
16÷50 2326 5÷ 8 30 2535÷70 2329 7÷12 39 30
505025
Conductor Sizesqmm
Ø Afor cable
mmQuantity
B L
D i m e n s i o n s m m
Conductor Sizesqmm
Ø Afor cable
mmQuantity
B L
D i m e n s i o n s m m
6÷16 2333 3÷ 5 27 3216÷50 2336 5÷ 8 32 4035÷70 2339 7÷12 39 4350÷95 2342 8÷14 48 48
70÷150 2344 12÷16 51 53150÷300 2346 18÷22 70 70
50502510105
Single bolt fixing
2 bolt fixing
Ref.
Ref.
A
A L
B
L
B
A
A
34
Series CA-M and 2A-M ter-minals are designed forhigh voltage applications upto 33 kV.They are manufactured fromhigh purity copper tube, an-nealed and tin plated.The extended barrel en-hances both electrical andmechanical performance.The absence of an inspec-tion hole prevents moistureentry into the crimped jointand makes these terminalssuitable for outdoor appli-cations.
CA-M2A-M
HIGH VOLTAGE COPPER TERMINALS
Hydraulic Tools
8 CA 25-M 8 6,8 14,0 9 8 65,0 8,410 CA 25-M 10 6,8 18,0 13 11 72,0 10,512 CA 25-M 12 6,8 21,0 16 14 78,0 13,212 CA 40 S-M 12 8,2 21,0 16 14 79,0 13,216 CA 40 S-M 16 8,2 26,0 19 17 85,0 17,012 CA 50 R-M 12 8,7 20,5 16 14 79,0 13,212 CA 50 S-M 12 9,5 21,0 16 14 79,0 13,216 CA 50 S-M 16 9,5 26,0 19 17 85,0 17,012 CA 70 S-M 12 11,0 28,0 16 14 81,2 13,212 CA 70 S-M 16 11,0 30,0 19 17 87,2 17,012 CA 95 R-M 12 12,0 28,0 16 14 91,0 13,214 CA 95 R-M 14 12,0 29,0 18 16 95,0 15,012 CA 95 S-M 12 13,5 28,0 16 14 91,0 13,214 CA 95 S-M 14 13,5 29,0 18 16 94,5 15,016 CA 95 S-M 16 13,5 30,0 20 17 97,0 17,012 CA 150 R-M 12 15,0 31,0 16 14 97,0 13,214 CA 150 R-M 14 15,0 31,0 18 16 101,0 15,012 CA 150 S-M 12 16,5 32,0 16 14 97,0 13,214 CA 150 S-M 14 16,5 32,0 18 16 101,0 15,014 CA 200 R-M 14 17,0 32,5 18 16 101,0 15,014 CA 240 R-M 14 19,2 43,0 18 16 107,0 15,014 CA 315 R-M 14 21,5 43,0 18 16 105,0 15,014 CA 315 S-M 14 23,7 44,0 18 16 105,0 15,014 2 A 80-M 14 27,0 51,0 22 19 140,0 15,016 2 A 80-M 16 27,0 51,0 22 19 140,0 17,020 2 A 80-M 20 27,0 51,0 24 23 146,0 21,016 2 A 100-M 16 30,3 56,5 22 19 147,0 17,020 2 A 100-M 20 30,3 56,5 24 23 153,0 21,016 2 A 120-M 16 33,4 61,5 22 19 159,0 17,020 2 A 120-M 20 33,4 61,5 24 23 165,0 21,0
300/50200/50200/50150/50150/50150/50150/50100/5050/2550/2550/2550/2550/2550/2550/2530/1530/1530/1530/1530/1515/515/530/515/515/515/510/510/520/520/5
Conductor Sizesqmm
ØStudmm
QuantityBox/BagØi B M N L d
D i m e n s i o n s m mRef.
25 R
30 RC/S ÷ 40 S
50 RC
50 S
63 S ÷ 70 S
80 S ÷ 95 RC
95 S ÷ 100 S
120 RC/S ÷ 150 RC
150 S ÷ 160 RC
160 S ÷ 200 RC200 S ÷ 240 RC240 S ÷ 315 RC
315 S
400 R
500 R
600 R ÷ 630 R
R = Round conductors RC = Round Compact conductors S = Sector shaped conductors
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
RHU
520
35
HIGH VOLTAGE TERMINALS
two hole fixing CA-2M2A-2M
CA-2M and 2A-2M CopperTube Terminal Lugs are de-signed for high voltage ap-plications up to 33kV. Man-ufactured from high puritycopper tube, annealed andtin-plated. The extendedbarrel enhances electricaland mechanical perfor-mance. The absence of aninspection hole preventsmoisture entry into thecrimped joint. Featuring anextended palm with two fix-ing holes at 44.5mm cen-tres.
HydraulicTools
8 CA 25-2 M 8 6,8 14,0 10 11 113,5 8,412 CA 25-2 M 12 6,8 21,0 16 14 122,5 13,212 CA 40 S-2 M 12 8,2 21,5 16 14 123,5 13,212 CA 50 R-2 M 12 8,7 20,5 16 14 123,5 13,212 CA 50 S-2 M 12 9,5 21,0 16 14 123,5 13,212 CA 70 S-2 M 12 11,0 26,0 16 14 127,7 13,214 CA 95 R-2 M 14 12,0 28,0 18 16 139,5 15,014 CA 95 S-2 M 14 13,5 29,0 18 16 139,5 15,014 CA 150 R-2 M 14 15,0 31,0 18 16 145,5 15,014 CA 150 S-2 M 14 16,5 32,0 18 16 145,5 15,014 CA 200 R-2 M 14 17,0 32,5 18 16 145,0 15,014 CA 240 R-2 M 14 19,2 43,0 18 16 151,5 15,014 CA 315 R-2 M 14 21,5 43,0 18 16 149,5 15,014 CA 315 S-2 M 14 23,7 44,0 18 16 149,5 15,012 2 A 80-2 M 12 27,0 51,0 20 14 177,5 13,214 2 A 80-2 M 14 27,0 51,0 22 16 181,5 15,016 2 A 80-2 M 16 27,0 51,0 22 19 184,5 17,014 2 A 100-2 M 14 30,3 56,5 22 16 182,5 15,016 2 A 100-2 M 16 30,3 56,5 22 19 185,5 17,014 2 A 120-2 M 14 33,4 61,5 22 16 200,5 15,016 2 A 120-2 M 16 33,4 61,5 22 19 202,5 17,0
200/50150/50100/50100/50100/5050/2530/1530/1530/1530/1530/1515/520/520/515/515/515/510/510/515/515/5
Conductor Sizesqmm
ØStudmm
QuantityBox/BagØi B M N L d
D i m e n s i o n s m mRef.
25 R
30 RC/S ÷ 40 S50 RC50 S
63 S ÷ 70 S80 S ÷ 95 RC95 S ÷ 100 S
120 RC/S ÷ 150 RC150 S ÷ 160 RC160 S ÷ 200 RC200 S ÷ 240 RC240 S ÷ 315 RC
315 S
400 R
500 R
600 R ÷ 630 R
R = Round conductors RC = Round Compact conductors S = Sector shaped conductors
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
RHU
520
R = Round conductors
2A-2M/55°
The 2A-2M/55° CopperTube Terminal Lugs havethe same characteristicsas the CA-2M and 2A-2Mranges, with the additionalfeature of the palm bent at55°.
HIGH VOLTAGE TERMINALS
two hole fixing
HydraulicTools
14 2 A 80 - 2 M 14/55° 27,0 51,0 22 16 15
14 2 A 120 - 2 M 14/55° 33,4 61,5 22 16 15
10/5
15/15
Conductor Sizesqmm
ØStudmm
QuantityBox/BagØi B M N d
D i m e n s i o n s m mRef.
400 R
600 R ÷ 630 R
HT 1
20an
d to
ols
and
head
swi
th
130
kNcr
impi
ngfo
rce
ECW
-H3D
RHU
520
36
MT-C series connectorsare designed for high volt-age applications up to 33kV. They are manufacturedfrom high purity copper, an-nealed and tin plated.The extended barrel en-hances both electrical andmechanical performance.The stalk or pin makesthese connectors ideal forterminating conductors in-to contact blocks.
MT-CHIGH VOLTAGE STALK CONNECTORS
HydraulicTools
MT 25-C 8 6,8 8 35 80MT 40 S-C 8 8,2 8 35 80MT 40 S-C 10 8,2 10 35 80MT 40 S-C 14-80 8,2 14 80 123MT 50 R-C 8 8,8 8 35 80MT 50 R-C 10 8,8 10 35 80MT 50 S-C 8 9,5 8 35 80MT 50 S-C 10 9,5 10 35 80MT 50 S-C 14-80 9,5 14 80 123MT 70 S-C 10 11,2 10 35 90MT 95 R-C 10 12,0 10 45 110MT 95 R-C 12 12,0 12 45 110MT 95 S-C 10 13,5 10 45 110MT 95 S-C 12 13,5 12 45 110MT 95 S-C 14-80 13,5 14 80 145MT 150 R-C 12 15,0 12 45 110MT 150 R-C 16 15,0 16 45 110MT 150 S-C 12 16,5 12 45 110MT 150 S-C 14-80 16,5 14 80 145MT 150 S-C 16 16,5 16 45 110MT 200 R-C 10 17,0 10 45 110MT 200 R-C 16 17,0 16 45 110MT 240 R-C 12 19,5 12 50 115MT 240 R-C 16 19,5 16 50 115MT 315 R-C 16 21,5 16 50 115MT 315 S-C 16 24,0 16 60 130
90/390/390/330/390/390/390/390/330/330/360/360/360/360/360/360/360/360/345/360/330/330/330/330/330/330/3
Conductor Sizesqmm
QuantityBox/BagLPBØi
D i m e n s i o n s m mRef.
25 R
30 RC/S ÷ 40 S
50 RC
50 S
63 S ÷ 70 S
80 S ÷ 95 RC
95 S ÷ 100 S
120 RC/S ÷ 150 RC
150 S ÷ 160 RC
160 S ÷ 200 RC
200 S ÷ 240 RC
240 S ÷ 315 RC315 S
R = Round conductors RC = Round Compact conductors S = Sector shaped conductors
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th 1
30 k
N cr
impi
ng fo
rce
ECW
-H3D
RHU
520
37
HIGH VOLTAGE COPPER THROUGH CONNECTORS
MT-TDMT-GC
MT-TD and MT-GC seriesconnectors are designedto join conductors in highvoltage applications up to33 kV. They are manufacturedfrom high purity copper, an-nealed and tin plated.MT-GC series feature a sol-id stop which forms a bar-rier between the two con-ductors being joined, thisprevents the migration ofoils or greases, which maybe present, in one cablecontaminating the othercable.MT-TD connectors are un-blocked and are suitable forjoining cables of the sametype.
HydraulicTools
MT 25-TD MT 25-GC 6,8 60MT 40 S-TD MT 40 S-GC 8,2 60MT 50 R-TD MT 50 R-GC 8,7 60MT 50 S-TD MT 50 S-GC 9,5 60MT 70 S-TD MT 70 S-GC 11,0 70MT 95 R-TD MT 95 R-GC 12,0 80MT 95 S-TD MT 95 S-GC 13,5 80MT 150 R-TD MT 150 R-GC 15,0 80MT 150 S-TD MT 150 S-GC 16,5 80MT 200 R-TD MT 200 R-GC 17,0 100MT 240 R-TD MT 240 R-GC 19,2 100MT 315 R-TD MT 315 R-GC 21,5 100MT 315 S-TD MT 315 S-GC 23,7 100MT 400-TD 27,0 120MT 500-TD 30,3 118MT 630-TD 33,4 130
90/390/390/390/330/330/330/330/330/330/330/330/330/315/315/39/3
Conductor Sizesqmm
QuantityBox/BagØi L
D i m e n s i o n s m mRef. Ref.
25 R30 RC/S ÷ 40 S
50 RC50 S
63 S ÷ 70 S80 S ÷ 95 RC95 S ÷ 100 S
120 RC/S ÷ 150 RC150 S ÷ 160 RC160 S ÷ 200 RC200 S ÷ 240 RC240 S ÷ 315 RC
315 S400 R500 R
600 R ÷ 630 RR = Round conductors RC = Round Compact conductors S = Sector shaped conductors
HT 8
1-U
RH
U 81
HT 1
20 a
nd to
ols
and
head
s wi
th
130
kN c
rimpi
ng fo
rce
ECW
-H3D
RHU
520
MT-TD
MT-GC
38
AA-M series terminals aremade from aluminium of apurity equal to or greaterthan 99,5%.They are designed to ac-cept a variety of conductorforms especially lowstranded compacted con-ductors. Non circular conductorsmay require pre-roundingprior to introduction to theterminal.Barrels are capped andfilled with grease so as toavoid oxidation of the alu-minium.
AA-MALUMINIUM TERMINALS
Hydraulic Tools
8 AA 16-M 8 5,5 21 13 11 77,0 8,48 AA 25-M 8 6,5 21 13 11 77,0 8,48 AA 35-M 8 8,0 23 13 11 77,5 8,4
10 AA 35-M 10 8,0 23 13 11 77,5 10,512 AA 50-M 12 9,0 26 16 14 91,0 13,214 AA 50-M 14 9,0 26 18 16 95,0 15,012 AA 70-M 12 11,0 27 16 14 91,0 13,214 AA 70-M 14 11,0 27 18 16 95,0 15,012 AA 95-M 12 12,5 27 16 14 91,0 13,214 AA 95-M 14 12,5 27 18 16 95,0 15,012 AA 120-M 12 13,7 35 16 14 115,0 13,214 AA 120-M 14 13,7 35 18 16 119,0 15,012 AA 150-M 12 15,5 34 16 14 115,0 13,214 AA 150-M 14 15,5 34 18 16 119,0 15,012 AA 185-M 12 17,0 42 20 14 122,0 13,214 AA 185-M 14 17,0 42 22 16 126,0 15,012 AA 240-M 12 19,5 44 20 14 122,0 13,214 AA 240-M 14 19,5 44 22 16 126,0 15,012 AA 300-34-M 12 22,5 47 22 14 130,0 13,2
Conductor Sizesqmm
ØStudmm
QuantityBox/BagØi B M N L d
D i m e n s i o n s m mRef.
50
35
2516
70
95
120
150
185
240
HT 131-UCRHU 131-CB 131-UC
300
60/360/360/360/360/360/345/345/345/345/330/330/330/330/318/318/315/315/315/3
39
THROUGH CONNECTORS
for aluminium conductors MTMA-GC
MTMA-GC series throughconnectors are made fromaluminium of a purity equalto or greater than 99,5%.They feature a solid stopwhich creates a barrier be-tween the two sides of con-ductors to be joined.Barrels are capped andfilled with grease so as toavoid oxidation of the con-nector.
HydraulicTools
16 MTMA 16-GC MTMA 16/1 5,5 90,525 MTMA 25-GC MTMA 25/1 6,5 90,535 MTMA 35-GC MTMA 35/1 8,0 90,550 MTMA 50-GC MTMA 50/1 9,0 106,570 MTMA 70-GC MTMA 70/1 11,0 106,595 MTMA 95-GC MTMA 95/1 12,5 110,0120 MTMA 120-GC MTMA 120/1 13,7 133,0150 MTMA 150-GC MTMA 150/1 15,5 135,0185 MTMA 185-GC MTMA 185/1 17,0 143,5240 MTMA 240-GC MTMA 240/1 19,5 143,5
MTMAD 300-GC 22,5 144,5MTMAD 300/1 22,5 135,0
60/360/360/330/330/330/330/330/315/315/315/3
50
Conductor Sizesqmm
QuantityBox/BagLØi
D i m e n s i o n s m mRef. Ref.
HT 131-UCRHU 131-CB 131-UC
REDUCER THROUGH CONNECTORS
for aluminium conductors MTMA-GC
Reducer connectors aremanufactured to the sameconstruction as seriesMTMA-GC.If used to join an aluminiumconductor to a copper con-ductor care should be takento ensure that the joint issealed against outside ele-ments which would causeoxidation.
HydraulicTools
5025 MTMA 50-25-GC 9,0 6,5 106,535 MTMA 50-35-GC 9,0 8,0 106,5
7035 MTMA 70-35-GC 11,0 8,0 106,550 MTMA 70-50-GC 11,0 9,0 106,5
9550 MTMA 95-50-GC 12,5 9,0 109,470 MTMA 95-70-GC 12,5 11,0 106,5
12070 MTMA 120-70-GC 13,7 11,0 133,095 MTMA 120-95-GC 13,7 12,5 133,070 MTMA 150-70-GC 15,5 11,0 133,0
150 95 MTMA 150-95-GC 15,5 12,5 134,4120 MTMA 150-120-GC 15,5 13,7 133,0
185120 MTMA 185-120-GC 17,0 13,7 143,5150 MTMA 185-150-GC 17,0 15,5 143,5
240150 MTMA 240-150-GC 19,5 15,5 145,6185 MTMA 240-185-GC 19,5 17,0 143,5
300185 MTMAD 300-185-GC 22,5 17,0 144,5240 MTMAD 300-240-GC 22,5 19,5 144,5
30/330/330/330/330/330/330/330/330/330/330/315/315/315/315/315/315/3
Conductor Size sqmmSide A Side B
AI AI/Cu
QuantityBox/BagØB LØA
D i m e n s i o n s m mRef.
HT 131-UCRHU 131-CB 131-UC
300
MTMA-GC
MTMA/1
40
The barrel of series CAA-Mconnectors are made fromaluminium of a purity equal toor greater than 99,5%.The barrel is friction weldedto the palm thus achievingthe best possible transitionbetween the copper palmand aluminium barrel.Barrels are capped and filledwith grease so as to avoid ox-idation of the aluminium.
CAA-MBIMETALLIC CONNECTORS
copper palm fixingaluminium barrels
HydraulicTools
16 12 CAA 16-M 12 5,5 24 87 1325 12 CAA 25-M 12 6,5 24 87 1335 12 CAA 35-M 12 8,0 24 87 1350 12 CAA 50-M 12 9,0 24 87 1370 12 CAA 70-M 12 11,0 24 87 1395 12 CAA 95-M 12 12,5 24 87 13120 12 CAA 120-M 12 13,7 31 111 13150 12 CAA 150-M 12 15,5 31 111 13185 12 CAA 185-M 12 17,0 35 116 13240 12 CAA 240-M 12 19,5 35 116 13300 12 CAA 300-34-M 12 22,5 35 120 13
90/360/360/360/360/360/330/330/324/318/315/3
HT 131-UCRHU 131-CB 131-UC
Conductor Sizesqmm
ØStudmm
QuantityBox/BagdLBØi
D i m e n s i o n s m mRef.
The barrel of series MTA-Cconnectors are made fromaluminium of a purity equal toor greater than 99,5%.The barrel is friction weldedto the pin thus achieving thebest possible transition be-tween the copper pin and alu-minium barrel.Barrels are capped and filledwith grease so as to avoid ox-idation of the aluminium.
MTA-CBIMETALLIC CONNECTORS
copper pinaluminium barrels
HydraulicTools
16 MTA 16-C 5,5 8 30 8225 MTA 25-C 6,5 8 30 8235 MTA 35-C 8,0 8 30 8250 MTA 50-C 9,0 12 45 9770 MTA 70-C 11,0 12 45 9795 MTA 95-C 12,5 12 45 97
120 MTA 120-C 13,7 14 55 125150 MTA 150-C 15,5 14 55 125185 MTA 185-C 17,0 14 55 125240 MTA 240-C 19,5 14 55 125
90/390/3 90/3 60/360/360/3 30/330/324/324/3
Conductor Sizesqmm
QuantityBox/BagLPBØi
D i m e n s i o n s m mRef.
HT 131-UCRHU 131-CB 131-UC
TE
RM
IN
AL
B
LO
CK
S
3, 4, 5, 8 and 12 way, sin-gle pole terminal blocks.Ideal for use as an equipo-tential bonding connectorfor both industrial and do-mestic use.
Z16SINGLE POLE “ZETApiù” TYPE TERMINAL BLOCKS
indirect clamping - nominal section 16 sqmm
42
3, 5, 6 and 10 way, singlepole terminal blocks forconductor section 1 to 6sqmm.Self contained and robust,they are quick and easy toinstall for both industrialand domestic use.The indirect clamping ofthe "ZETApiù" terminalblocks guarantees a lowand stable contact resis-tance. Indirect clamping elimi-nates damage to the con-ductor strands.The easy-entry receptaclesalso grant a fast and reli-able insertion of the cable.
Z6SINGLE POLE “ZETApiù” TYPE TERMINAL BLOCKS
indirect clamping - nominal section 6 sqmm
QuantityRef. No.of Ways
ConnectingCapacity
sqmm
NominalVoltage
V
MaximumOperating
Temperature°C
InsulationSpecification
Self ExtinguishingSpecification
Dimensions mm
Weigthg
QuantityRef. No.of Ways
ConnectingCapacity
sqmm
NominalVoltage
V
MaximumOperating
Temperature°C
InsulationSpecification
Self ExtinguishingSpecification
Dimensions mm
Weigthg
Z6-33 (3 way) 1÷6 450 85 IP 20 V-0 (UL 94)
23x23xh27,5 15
Z6-3D 23x40xh36,5 18,5
Z6-55 (5 way) 1÷6 450 85 IP 20 V-0 (UL 94)
35x23xh27,5 23
Z6-5D 35x40xh36,5 26,5
Z6-66 (6 way) 1÷6 450 85 IP 20 V-0 (UL 94)
23x43xh28,5 26
Z6-6D 23x53xh34 31
Z6-1010 (10 way) 1÷6 450 85 IP 20 V-0 (UL 94)
35x43xh28,5 41
Z6-10D 35x53xh33 46
30
10
20
10
15
10
10
15
D= Version with clamp for DIN rail
Z16-33 16 450 85 IP 20 V-0 (UL 94)
38x31,3xh38 52
Z16-3D 38x50xh44 55,5
Z16-44 16 450 85 IP 20 V-0 (UL 94)
27x54xh37 50
Z16-4D 27x58xh43 54
Z16-5N5 16 450 85 IP 20 V-0 (UL 94)
61x31,5xh38 64,5
Z16-5ND 61x50xh44 68
Z16-8 8 450 85 IP 20 V-0 (UL 94)35,5x50xh36,5 50
Z16-8D (2÷6) 35,5x57xh42 56
Z16-12 12 450 85 IP 20 V-0 (UL 94)104,5x32,5xh36,5 115
Z16-12D (2÷10) 104,5x50xh42 125
20
15
15
10
10
4
15
10
8
5
D= Version with clamp for DIN rail
Technical features:• Self-extinguishing polycarbonate body• Tempered steel clamps• Electrolyticaly tin plated copper connection plate
Z6-3 Z6-5 Z6-6 Z6-10
Z16-3 Z16-4 Z16-5NZ16-8
Z16-12
The “Z...D” version has been designed for mounting on DIN rails
(2 way) 16+
(6 way) 6
(2 way) 16+
(10 way) 6
43
SINGLE POLE “ZETApiù” TYPE TERMINAL BLOCKS
indirect clamping - nominal section 35 sqmm Z35
3, 4 and 6 way, single poleterminal blocks. Ideal foruse as an equipotentialbonding connector for bothindustrial and domesticuse.
Z35-33 35 450 85 IP 20 V-0 (UL 94)
53x48,5xh47 110
Z35-3D 53x54xh56 114
Z35-44 35 450 85 IP 20 V-0 (UL 94)
37x85xh42 129
Z35-4D 37x85xh48 133
Z35-6450 85 IP 20 V-0 (UL 94)
83x41xh43 130
Z35-6D 83x49xh52 140
10
5
5
5
8
5
D= Version with clamp for DIN rail
Z35-3 Z35-4 Z35-6
(2 way) 35+
(4 way) 166
(2+4)
SINGLE POLE “ZETApiù” TYPE TERMINAL BLOCKS
indirect clamping - for earthing applications � Z35Z50
10, 11 and 26 way, singlepole terminal blocks.Ideal for use as an equipo-tential bonding connector forboth industrial and domesticuse.
QuantityRef. No.of Ways
ConnectingCapacity
sqmm
MaximumOperating
Temperature°C
Self ExtinguishingSpecification
Dimensions mm
Weigthg
Z35T-11 85 V-0 (UL 94) 58x43xh42 70
Z35-26D 85 V-0 (UL 94) 151x50xh50 379
Z50-10D 85 V-0 (UL 94) 77,5x55xh49 320
10
4
6
D= Version with clamp for DIN rail
(1 way) 35+
(10 way) 6
(2 way) 35+
(24 way) 10
(2 way) 50+
(8 way) 25
11(1+10)
26(2+24)
10(2+8)
Z35T-11
Z35-26DZ50-10D
QuantityRef. No.of Ways
ConnectingCapacity
sqmm
NominalVoltage
V
MaximumOperating
Temperature°C
InsulationSpecification
Self ExtinguishingSpecification
Dimensions mm
Weigthg
44
CONNECTING CAPACITY OF TERMINAL BLOCKS TYPE “ZETApiù”
TYPE NOMINALSECTION
No. OF WAYSX NOMINAL SECTION
CONNECTING CAPACITY OF EACH WAY*
No. of Conductors x SectionMARKING
Z6-3 Z6-3D 6❏ 3 x 6❏1 x 6❏ R/F1 x 4❏ R/F
1÷2 x 2,5❏ R/F1÷2 x 1,5❏ R/F1÷4 x 1❏ R/F
1 x 16❏ R/F1 x 10❏ R/F
1÷2 x 6❏ R/F1÷3 x 4❏ R/F1÷4 x 2,5❏ R/F1÷8 x 1,5❏ R/F
1 x 6❏ R/F1 x 4❏ R/F
1÷2 x 2,5❏ R/F1÷2 x 1,5❏ R/F1÷4 x 1❏ R/F
1 x 16❏ F1 x 10❏ F
1÷2 x 6❏ F1÷3 x 4❏ F1÷4 x 2,5❏ F
1 x 6❏ F1 x 4❏ F
1÷2 x 2,5❏ F1÷4 x 1,5❏ F1÷5 x 1❏ F
Z6-5 Z6-5D 6❏ 5 x 6❏
Z6-6 Z6-6D 6❏ 6 x 6❏
Z6-10 Z6-10D 6❏ 10 x 6❏
Z16-3Z16-3D
16❏ 3 x 16❏
16❏ 5 x 16❏
Z16-8Z16-8D
Z16-12Z16-12D
16❏/6❏
16❏/6❏
2 x 16❏
6 x 6❏
2 x 16❏
10 x 6❏
1 x 35❏ R/F1 x 25❏ R/F1 x 16❏ R/F1 x 10❏ R/F
1 x 6❏ R/F1 x 4❏ R/F
1÷2 x 2,5❏ R/F1÷2 x 1,5❏ R/F1÷4 x 1❏ R/F
Z35T-11 35❏/6❏
1 x 35❏
10 x 6❏
1 x 35❏ R/F1 x 25❏ R/F
1÷2 x 16❏ R/F1÷3 x 10❏ R/F1÷6 x 6❏ F
1 x 16❏ R/F1 x 10❏ R/F
1÷2 x 6❏ R/F1÷3 x 4❏ R/F1÷5 x 2,5❏ F
Z35-3Z35-3D
Z35-6Z35-6D
35❏
35❏/16❏
3 x 35❏
Z35-4Z35-4D
35❏ 4 x 35❏
2 x 35❏
4 x 16❏
1 x 35❏ R/F1 x 25❏ R/F
1÷2 x 16❏ R/F1÷3 x 10❏ R/F1÷6 x 6❏ R/F
1 x 10❏ R/F1 x 6❏ R/F
1÷2 x 4❏ R/F1÷4 x 2,5❏ R/F
Z35-26D 35❏/10❏
2 x 35❏
24 x 10❏
1 x 50❏ R/F1 x 35❏ R/F
1÷2 x 25❏ R/F1÷4 x 16❏ R/F
1 x 25❏ R/F1÷2 x 16❏ R/F1÷3 x 10❏ R/F1÷6 x 6❏ R/F1÷9 x 4❏ R/F
Z50-10D 50❏/25❏
2 x 50❏
8 x 25❏
*Various cable sizes may be connected to the terminal block provided that the sum of cable sections is less than the nominal section.R = Rigid cable F = Flexible cable
6 sqmm450 VT 85°C
6 sqmm450 VT 85°C
16 sqmm450 VT 85°C
16 sqmm450 VT 85°C
16÷6 sqmm450 VT 85°C
16÷6 sqmm450 VT 85°C
35 sqmm450 VT 85°C
35 sqmm450 VT 85°C
35÷16 sqmm450 VT 85°C
35÷6 sqmmT 85°C
35÷10 sqmmT 85°C
50÷25 sqmmT 85°C
Z16-5NZ16-5ND
16 sqmm450 VT 85°C
16❏ 4 x 16❏Z16-4Z16-4D
TER
MIN
AL
BLO
CK
S T
YPE
“ZE
TA
più
”
MARKING:
Directives CEE 73-23 and CEE 93-68
EN 60998-1: 1993-08 + A1:2001 and 60998-2-1: 1993-08 Norms
Lloyd‘s Register of Shippingtype approval
“Registro Italiano Navale” type approval
45
100, 125 and 160A, 2–4phase distribution blocks with7, 14 and 12 ways per phaserespectively.Accepting a wide cable CSArange (1 - 50 AWG) and ofcompact size, ZETAblocks areideal for control cabinets anddistribution panels.The lateral arrangement of ter-minals on upper and lowerfaces (Z35-DP14B one faceonly), simplifies connection andpromotes tidy, homogeneouscable routing to assist subse-quent wiring operations.Easy entry apertures providequick, effective cable insertionwhile the indirect clamping fea-ture eliminates damage to ca-ble strands and assures a low,stable contact resistance.
Z-DP
Technical features:• Self extinguishing antishock polycarbonate body• Tempered steel captive clamping screws and plates• Electrolyticaly tin plated copper connection plate
QtyRef.
No.of Ways
perphase
NominalCSA
for each phasesqmm
Allowableshort
durationfault
current Icw
Maximumallowedpeakfault
current Ipk
Maximumoperatingvoltage
Ui
ImpulsevoltageUimp
Maximumoperatingcurrent
In
Self ExtinguishingSpecification
Dimensionsmm
Weightg
Z 25-DP7-100 500 V 8 kV 100 A V-0 (UL 94) 70x84xh45 290 27(2+5)
Z 35-DP14-125 660 V 8 kV 125 A V-0 (UL 94) 137x83xh46 700 114(2+2+10)
Z 35-DP14B-125 660 V 8 kV 125 A V-0 (UL 94) 137x44xh46 360 214(2+2+10)
Z 50-DP12-160 500 V 8 kV 160 A V-0 (UL 94) 150x84xh48 780 112(2+4+6)
No.of
phases
4
4
2
4
3 kA
4,2 kA
4,2 kA
6 kA
18 kA
18 kA
18 kA
18 kA
POWER DISTRIBUTION BLOCK TYPE “ZETAblock”
indirect clamping
1 x 50❏ F1 x 35❏ F
1÷2 x 25❏ F1 x 25❏ F1 x 16❏ F
1÷2 x 10❏ FZ50-DP12-160 50❏/25❏/16❏
2 x 50❏
1 x 16❏ F1 x 10❏ F
1÷2 x 6❏ F6 x 16❏
4 x 25❏
1 x 25❏ F1 x 16❏ F
1÷2 x 10❏ F2 x 25❏
TYPE NOMINALSECTION
No. OF WAYSx NOMINAL SECTION
CONNECTING CAPACITY OF EACH WAYNo. of Conductors x Section MARKING
CONNECTING CAPACITY OF POWER DISTRIBUTION BLOCK TYPE “ZETAblock”
50÷25÷16 mm2
35÷16÷6 mm2
F = Flexible cable
Z35-DP14-125
Z35-DP14B-12535❏/16❏/6❏
Z25-DP7-100 25❏/6❏
1 x 35❏ F1 x 25❏ F
1÷2 x 16❏ F1÷3 x 10❏ F
2 x 35❏
1 x 16❏ F1 x 10❏ F
1÷2 x 6❏ F1÷3 x 4❏ F1÷4 x 2,5❏ F
2 x 16❏
1 x 6❏ F1 x 4❏ F
1÷2 x 2,5❏ F1÷2 x 1,5❏ F1÷4 x 1❏ F
10 x 6❏
1 x 6❏ F1 x 4❏ F
1÷2 x 2,5❏ F1÷2 x 1,5❏ F1÷4 x 1❏ F
5 x 6❏
POW
ER D
ISTR
IBUT
ION
BLOC
K TY
PE “Z
ETAb
lock
”
Z 50-DP12-160Z 35-DP14-125Z 35-DP14B-125
(2 way) 25+
(5 way) 6
(2 way) 35+
(2 way) 16+
(10 way) 6
(2 way) 35+
(2 way) 16+
(10 way) 6
(2 way) 50+
(4 way) 25+
(6 way) 16
Z2,5-1 Z6-1 Z10-1Z16-1
Z25-1 Z35-1
ONE WAY “ZETAmini” TYPE TERMINAL BLOCKS
indirect clampingZ6
46
One way, single pole terminalblocks for conductors sec-tions from 0.5 to 35 sqmm.Self contained and robust,they are ideal for the fastand safe installation for in-dustrial and domestic appli-cations.The indirect clamping of the"ZETAmini" terminal blocksguarantees a low and sta-ble contact resistance.The easy-entry receptacle al-so grants a fast and reliableinsertion of the cable.
QuantityBox/BagRef.
ConnectingCapacity
sqmm
NominalVoltage
V
MaximumOperating
Temperature°C
InsulationSpecification
Self ExtinguishingSpecification
Dimensions mm
Weigthg
2,5
85450 IP 20 V-0 (UL 94)
7,6x20xh23,5 3 500/25
250/25
150/10
100/10
50/10
40/10
Z2,5-1
6 11,5x28xh29 6Z6-1
10 15,6x32xh32,5 11Z10-1
16 18x34xh38 15Z16-1
25 20,8x42,5xh43,5 29Z25-1
35 25x45xh51,5 37Z35-1
Technical features:• Self-extinguishing polycarbonate body
• Electrolytically zinc plated, tempered steel clamp and screw
• Electrolyticaly tin plated steel connection plate
CONNECTING CAPACITY OF TERMINAL BLOCKS TYPE “ZETAmini”
TYPE NOMINALSECTION
CONNECTING CAPACITY *No. of Conductors x Section MARKING
2,5❏Z2,5-12 x 2,5❏ R/F
2÷3 x 1,5❏ R/F2÷5 x 1,0❏ R/F
2÷6 x 0,75❏ R/F2÷10 x 0,5❏ R/F2÷18 x Ø 0,4÷0,6 mmcommunication type wire**
6❏Z6-12 x 6❏ R/F
2÷3 x 4❏ R/F2÷4 x 2,5❏ R/F2÷6 x 1,5❏ R/F
2÷6 x 1❏ R/F2÷10 x 0,75❏ R/F2÷12 x 0,5❏ R/F
10❏Z10-12 x 10❏ R/F
2÷3 x 6❏ R/F2÷5 x 4❏ R/F2÷8 x 2,5❏ R/F
2÷12 x 1,5❏ R/F2÷20 x 1❏ R/F2÷25 x 0,75❏ R/F
16❏Z16-12 x 16❏ R/F
2÷3 x 10❏ R/F2÷5 x 6❏ R/F
2÷8 x 4❏ R/F2÷12 x 2,5❏ R/F2÷18 x 1,5❏ R/F
25❏Z25-12 x 25❏ R/F
2÷3 x 16❏ R/F2÷4 x 10❏ R/F
2÷8 x 6❏ R/F2÷11 x 4❏ R/F4÷16 x 2,5❏ R/F
35❏Z35-12 x 35❏ R/F
2÷3 x 25❏ R/F2÷4 x 16❏ R/F2÷7 x 10❏ R/F
2÷11 x 6❏ R/F4÷17 x 4❏ R/F5÷28 x 2,5❏ R/F
*Various cable sizes may be connected to the terminal block provided that the sum of cable sections is less than twice the nominal section.
R = Rigid cable F = Flexible cable
2,5 sqmm450 VT 85°CIP 20
6 sqmm450 VT 85°CIP 20
10 sqmm450 VT 85°CIP 20
16 sqmm450 VT 85°CIP 20
25 sqmm450 VT 85°CIP 20
35 sqmm450 VT 85°CIP 20TE
RMIN
AL B
LOCK
S TY
PE“Z
ET
Am
ini”
ME
CH
AN
ICA
L A
ND
P
NE
UM
AT
IC T
OO
LS
Tool for crimping end sleeves0,5 to 6 sqmmfront insertion
ZKE 6-F
For end sleeves 0,75 to 10 sqmm
ZKE 2
Single aperture, ratchet controlledtool for crimping end sleeves,0,08 to 6 sqmmside insertion
ZKE 6
Single aperture, ratchet controlledtool for crimping end sleeves,0,75 to 10 sqmmside insertion
ZKE 10
nd
48
MECHANICAL TOOLS
Type Application Conductor Sizesqmm
Dimensionsmm
Weightg
ND#1 insulated and 0,3÷1,5 190x72x21 470ND#2 uninsulated 1÷6 190x72x21 470ND#3 end sleeves 6÷16 190x72x21 470ND#4 0,5÷4 190x72x21 470
®
A brand new generation of tools,with a unique mechanism toreduce operator effort. Small and compact, withergonomically designed handlesfor ease of operation.High quality materials combinedwith advanced design and manu-facturing technology, produce areliable tool with a guaranteedconsistent, crimping operation.
RANGE
49
MECHANICAL TOOLS
The ratchet controlledtools in the Crimpstar®
range, are compact, light-weight and easy to use.
Features include:- High precision investment
cast jaws.- Ratchet controlled to
ensure precise and consi-stent crimping.
- Emergency release lever.- Toggle action leverage to
reduce operator effort.- Automatic handle opening
following completion of thecrimping operation.
- Ergonomically designed moulded plastic grips.
HP
Crimpstar ® RANGE
HNN
HNKE
HN
HF
HX
Insulated terminals and connectorsHP 1 for conductor sizes 0,2 to 2,5 sqmmHP 3 for conductor sizes 0,25 to 6 sqmm
Nylon insulated terminals and connectorsHNN 3 for conductor sizes 1,5 to 10 sqmm
HNN 4 for conductor sizes 10 and 16 sqmm
End sleevesHNKE 50 for conductor sizes 25 - 35 - 50 sqmm
Uninsulated terminals and connectorsHN 1 for conductor sizes 0,25 to 10 sqmmHN 5 for conductor sizes 10 and 16 sqmm
Open barrel brass terminals:HF 1 for conductors sizes 0,5 to 4 sqmm
HF 2 for conductors sizes 0,08 to 1,3 sqmm (28 to 16 AWG)
Coaxial connectorsHX 1 for types RG58, RG59, RG62 and RG 71
K range, reinforced insulated terminalHP 3-K for conductor size 0,25 to 6 sqmm
50
TN
Ratchet controlled tooling for crimping insulated connectors
TN 70 SETNN 70
HP4MECHANICAL TOOLS
TN 120 SETNN 120
HP4-Rfor conductors sizes 0,25 to 1,5 sqmm
HP4-B for conductor sizes 1,5 to 2,5 sqmm
HP4-Gfor conductor sizes 4 to 6 sqmm
For crimping insulated and uninsulatedconnectors, 0,25 to 6 sqmm
ZP2
Tool Type Application Cond. Size
sqmmDimensions LxH
mmWeight
kg
TN 70 SE uninsulated terminals and connectors 6÷70 450 x 127 2TNN 70 Nylon insulated terminals and connectors 10÷70 450 x 127 2
TN 120 SE uninsulated terminals and connectors 10÷120 700 x 170 3TNN 120 Nylon insulated terminals and connectors 10÷120 700 x 170 3
KTS 1632HAND TOOL FOR CUTTING AND SEALING FLEXIBLE CONDUIT
Cut and seals flexibles plasticconduit in a single operation.Lightweight and easy to operate.Suitable for flexible conduitsfrom Ø16 to Ø32 mm.
MT-FC47MECHANICAL HOLE PUNCHING TOOL FOR CABLE TRUNKING
Maximumthickness ofmild steel
mmCode
15,2 .598 Pg 9 - -16,2 .638 - ISO-16 -17,5 .688 - - -18,6 .732 Pg 11 - -19,1 .750 - - -20,4 .803 Pg 13,5 ISO-20 -20,6 .812 - - -22,5 .885 Pg 16 - 1/2” 223,8 .937 - - -25,4 1.000 - ISO-25 -27,0 1.063 - - -28,3 1.115 Pg 21 - 3/4”28,6 1.125 - - -30,5 1.210 - - -31,8 1.250 - - -32,5 1.280 - ISO-32 -34,6 1.357 - - 1”34,9 1.375 - - -37,0 1.457 Pg 29 - -38,1 1.500 - - - 340,5 1.594 - ISO-40 -41,3 1.625 - - -43,2 1.699 - - 1-1/4”44,5 1.750 - - -47,0 1.850 Pg 36 - -
RD 15,2 SRD 16,2 S*RD 17,5 S*RD 18,6 S RD 19,1 S*RD 20,4 SRD 20,6 S*RD 22,5 SRD 23,8 S*RD 25,4 S*RD 27 S*RD 28,3 SRD 28,6 S*RD 30,5 S*RD 31,8 S*RD 32,5 S*RD 34,6 S*RD 34,9 S*RD 37 SRD 38,1 S*RD 40,5 S*RD 41,3 S*RD 43,2 S*RD 44,5 S*RD 47 S
Ø mm Ø inch Pg ISO Tube
H o l e D i m e n s i o n s
Length: 230 mmWidth: 58 mmThickness: 32 mm.Weight: 0,32 kg.
*available upon request
Lightweight and easy tooperate tool, designed forpunching holes up to 47 mmdiameter in the side wall of trunkingwithout the need for pre drilling.
Length : 247 mmWidth: 224 mmThickness : 66 mm.Weight: 2,78 kg.
Table denoting thepunch/die set reference,
for each hole size.Suitable for punching holesin mild steel, fibreglass or
plastic material,up to 3 mm thick.
KT 1Hand operated tool for cutting cables up to a maximum Ø 15 mm
KT 2Hand operated tool for cutting cables up to a maximum Ø 25 mm
KT 5Hand operated toolfor cutting cablesup to max section 25 sqmm
KT
Multi-purpose scissorswith stainless steel blades
and large ABS handles.
Electricians scissorswith high carbon steel
blades and satinfinished Nylon handles.
HB 5HB 5 Wire stripper,
for PVC insulated wires1 to 6 sqmm
HB 2Wire stripper,
for circular cables Ø 4,5 to 28,5 mm
PTS4PTS4 Wire stripper,
for PVC insulated cables0,2 to 6 sqmm
HB 1-U Wire stripper, for PVC insulated cables
0,1 to 6 sqmm
HB 1-UWIRE STRIPPERS
SCISSORS
SC 1 SC 2X
CABLE CUTTERS
51
CABLECUTTERS
CABLECUTTERS
5116660500For cutting cables 6 to 500 sqmm
Weight: 3 kgLength: 800 mm
5116660250For cutting cables 6 to 250 sqmm
Weight: 1,5 kgLength: 600 mm
KT 4For cutting cables Ø max 52 mm
Weight: 0,89 kgLength: 310 mm
KT 3For cutting cables Ø max 32 mm
Weight: 0,59 kgLength: 255 mm
BE
NC
H
PR
ES
S
TO
OL
S
53
BENCH PRESS TOOLS
PNB-1
PNB-3
Hydro-pneumatic, productionbench press, controlled by afoot operated pedal. Extensive range of interchange-able dies available for crimping awide variety of connectors. Producing a consistent and reli-able crimped connection
Technical details:- Nominal operating pressure: 7 bar
- Dimensions LxDxH: 180x320x700 mm- Weight: 23 kg (without dies)
NOTE: for applications not listed, please contact Cembre.
Pneumatic bench press operatedby foot pedal for crimpingterminals and connectors 0,25to 16 sqmm.
Technical details:- Normal operating pressure: 6÷7 bar
- Dimensions LxDxH: 130x370x195 mm
- Weight: 10,3 kg
Pneumatic bench press, controlledby a foot operated pedal. Suppliedwith a multi-aperture die suitablefor crimping insulated and uninsu-lated end sleeves from 0,3 to 10sqmm. Compacted and efficient.Easy to operate, producing a se-cure and reliable crimped connec-
tion.Technical details:- Nominal operating pressure: 6 bar
- Dimensions LxDxH: 120x160x300mm
- Weight: 6 kg
Die Set Guard* Conductor Sizesqmm
PV-1 green 0,2÷0,5PR-1 Insulated red 0,25÷1,5PB-1 PU-1 connectors blue 1,5÷2,5PG-1 yellow 4÷6
KE 0,75-1 0,3 - 0,5 - 0,75KE 2,5-1 PK-1 End 1 - 1,5 - 2,5KE 10-1 Sleeves KE, PK... 4 - 6 - 10
MTT 16-50 ME-1 16MTT 25-50 25
A 03-M.. S 1,5-.. 0,25 - 1,5N1-1 PU-1 A 06-M.. S 2,5-.. 1,5 - 2,5
A 1-M.. S 6-.. 4 - 6ME 1-50 PU-1 A1-M.. 4 - 6ME 2-50 A2-M.. S10-M.. 10ME 3-50 A3-M.. 16ME 5-50 Bare A5-M.. 25ME 7-50 ME-1 copper A7-M..
35ME 9-50 lugs A9-M..ME 10-50 A10-M..
50ME 12-50 A12-M..MN 2RF-50 ANE2-M.. 10MN 3RF-50 Nylon ANE3-M.. 16MN 5RF-50 MN RF-1 insulated ANE5-M.. 25
MN 7RF-50 lugs ANE7-M..35ANE9-M..
* Supplied as standard with the machine
Connector Type Conductor Sizesqmm
PNB-3P1 Insulated terminals and connectors 0,2÷2,5PNB-3P* Insulated connectors red, blue and yellow 0,25÷6
PNB-3PD Insulated terminals and0,25÷6butt connectors - frontal insertion
PNB-3N1 Uninsulated terminals 0,25÷10PNB-3N5 Uninsulated terminals 10÷16
PNB-3NN3 Nylon insulated terminals 1,5÷10PNB-3NN4 Nylon insulated terminals 10÷16PNB-3F/M Bullet connectors 0,5÷2,5
PNB-4KE
* A positioner for the correct location of Polycarbonate fully insulated push-ons is available on request
INTERCHANGEABLE DIES (to be ordered separately)
Type
Connector Type Conductor Sizesqmm
End Sleeves type PK..PNB-4KE and type KE 0.3÷10
Tool
Type of connector
54
ELB-3
Electro-pneumatic, productionbench press, controlled by afoot operated pedal. Producing a consistent and re-liable crimped connection.Interchangeable applicationheads available to suit the com-plete range of polycarbonate in-sulated connectors.
Technical details:Air supply: 6 bar (90 psi)Dimensions LxDxH: 180x250x620mmWeight: 41 kg (without applicator heads)Motor:- Power 0,55 kW / 0,75 HP- Supply Voltage 220 V / 50 Hz- Speed 2.800 turns/minute
INTERCHANGEABLE APPLICATOR HEADS, SIDE ENTRY WITH PNEUMATIC FEED
(ORDER AS REQUIRED)
Connectors Conductor Sizesqmm
RA-2 Polycarbonate insulated red 0,25÷1,5BA-2 chain terminals blue 1,5÷2,5GA-2 yellow 4÷6
KE 1A-3 0,5÷1KE 2,5A-3
Insulated chain end sleeves1÷2,5
Type.
BENCH PRESS
for polycarbonate insulated chain connectors
See pages 6-7 and 16 for types and features of the insulated chain connectors
and end sleeves.
OPERATINGTEMPERATURE UP TO 115°C
Conforms to
DIN standard
46 228/4
HY
DR
AU
LIC
CR
IMP
ING
TO
OLS
AN
D C
UTTE
RS
56
Lightweightand compact,this tool is ideal forthe compression ofconnectors on overhead lines and othergeneral applications.
Having the benefit of springloaded handles, the dies can beadvanced using only one hand;therefore leaving the other handfree to position the connector.
For ease of operation and comfort ofthe operator, the tool head can be ful-ly rotated through 180 degrees.
The built-in safety valve will by-pass theoil supply when the maximum pres-sure is reached, and a pressure re-leasing system can easily be operat-ed at any stage of the compression.
HT 45-EHYDRAULIC CRIMPING TOOL
general features
CrimpingforcekN
Weigth kglength width
D i m e n s i o n s m m
50 346 130 2,0
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
“C” sleeveconnectors
H.V. lugsand splices
120 35 70
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P1* 445x290xh95 1,2 ❉ —*Suitable for storage of the tool and 20 sets of dies.
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
180° rotatable head,to work in the most
comfortable positionOpenable head, idealfor derivations fromrunning conductors
Pressure releasingsystem, that can beoperated at any stage.
The operator can advance the dies using only one hand,leaving the other hand free to position the connector.
Safety valvebypassing the oilsupply when the
maximum pressureis reached
57
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P1* 445x290xh95 1,2 ❉ —* Suitable for storage of the tool and 20 sets of dies.
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
50 700 196 75 1,6
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P1* 445x290xh95 1,2 ❉ —Canvas bag 007 350x105 0,13 — ❉
* Suitable for storage of the tool and 20 sets of dies.
L.V. lugsand splices
Insulatedterminals
Endsleeves
“C” sleeveConnectors
240 70 50 70
L.V. lugsand splices
Insulatedterminals
Endsleeves
“C” sleeveConnectors
240 70 50 70
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
New design twospeed hydraulic tool,lightweight and com-pact, this tool is ideal
for working in confinedspaces.
Having the benefit of springloaded handles, the dies can
be advanced using only onehand; therefore leaving the other
hand free to position the connector.For ease of operation and comfort of
the operator, the tool head can be ful-ly rotated through 180 degrees.The built-in safety valve will by-pass theoil supply when the maximum pres-sure is reached, and a pressure re-lease system can easily be operatedat any stage of the compression.
CrimpingforcekN
Weightkglength width
D i m e n s i o n s m m
50 380 130 2,7
HYDRAULIC CRIMPING TOOL
general features HT 51
Available upon request alsothe HT 51-KV version, for power supply companies
Hydrau l i cp r e s s h e a d
complete with quickautomatic coupler for
connection to a hydraulicpump with a working pressure of700 bar max, (see page 80)
RH 50 is suitable for installingthe same range of connectors as
HT 51.
HYDRAULIC PRESSHEAD
general features RH 50
Hydraulicpresshead com-
plete with quick au-tomatic coupler for con-
nection to hydraulic pumpwith working pressure of 700 bar
max, (see page 80). RHM50 is suit-able for installing the same range of
connectors as RH50.
RHM 50HYDRAULIC PRESSHEAD
general features
50 700 210 70 1,3
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P1* 445x290xh95 1,2 ❉ —Canvas bag 007 350x105 0,13 — ❉
* Suitable for storage of the tool and 20 sets of dies.
L.V. lugsand splices
Insulatedterminals
Endsleeves
240 70 50
Particularly suitablefor high volumebench crimping.
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
Hydraulic pressheadcomplete with quick au-tomatic coupler for con-nection to a hydraulic pumpwith a working pressure of 700bar max, (see page 80).This new model, lightweight and selfcontained, features a patented clo-sure and release mechanism forthe die locking pin. The head is easy to use and is ide-ally suited for crimping in confinedspaces. RHU81 is suitable for installing thesame range of connectors asHT 81-U.
RHU 81HYDRAULIC PRESSHEAD
general features
S T O R A G E
Type Dimensions mm Weightkg
Supplied with the tool
Available upon request
Canvas bag 007 350x105 0,13 — ❉
H T 8 1 - U a n d R H U 8 1 A C C E S S O R I E S F O R C U T T I N G C O N D U C T O R S
Die Type Cutting Capacity Conductor Type
MB2-80U
MB3-80U
Ø 16 mm
This die is suitable to cut steel conductors (R ≤ 160 daN/mm2) having the most common strandings, i.e.:
19 x 1,2 = Ø est. 6,0 mm7 x 3,0 = Ø est. 9,0 mm
19 x 2,1 = Ø est. 10,5 mm19 x 2,3 = Ø est. 11,5 mm
Suitable to cut aluminium strands of 150 mm2 aluminium-steel conductors, without damage to the steel core
Cu, Alu, Aldrey and Alu-Steel
58
This new model,lightweight andself contained, fea-tures a patentedclosure and release mech-anism for the die locking pin. A wide range of connectors canbe crimped with a small number ofdie sets due to their unique, doublegroove styling.Dies for cutting copper, aluminium, al-drey and aluminium-steel, are alsoavailable (see table below).The tool features a double speed ac-tion: a fast advancing speed for rapidapproach of the dies to the connectorand a slower more powerful speed forcrimping.For ease of operation and comfort ofthe operator the tool head can be ful-ly rotated through 180 degrees.
Thebuilt-ins a f e t yvalve willby-pass theoil supply whenthe maximumpressure is reached,and a pressure releas-ing system can easily beoperated at any stage of thecompression.
HYDRAULIC CRIMPING TOOL
general features
CrimpingforcekN
Weight Kglength width
D i m e n s i o n s m m
80 485 141 3,4
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P3* 620x380xh135 2,5 ❉ —VAL 75** 270x80xh30 0,15 — ❉
* Suitable for storage of the tool and three VAL 75.**Suitable for storing five sets of dies.
HT 81-U
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
80 700 235 91 1,9
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
L.V. lugsand splices
“C” sleeveconnectors
H.V. lugsand splices
240 100 200
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
“C” sleeveconnectors
H.V. lugsand splices
240 100 200
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
This light-weight and selfcontained tool will
accept the semi-cir-cular slotted dies,
common to most 130 kNtools.
It is particularly suitable for in-stalling crimp type electrical con-
nectors for overhead line applica-tions.The tool features a double speed ac-tion: a fast advancing speed for rapidapproach of the dies to the connec-tor and a slower more powerfulspeed for crimping.For ease of operation and comfort ofthe operator the tool head can be ful-ly rotated through 180 degrees.
CrimpingforcekN
Weight kglength width
D i m e n s i o n s m m
120 488 138 5,7
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P3* 620x380xh135 2,5 ❉ —*Suitable for storage of the tool and 14 sets of dies.
59
HYDRAULIC CRIMPING TOOL
general features HT 120
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
400 240 185 400
Available upon requestthe HT 120-KV version, for power supply companies
HT 120 features adouble speed action: afast advancing speedfor rapid approach ofthe dies to the con-nector and a slowermore powerful speedfor crimping.
Die release system,protected from acci-dental operation
Pressure release trig-ger, which can be op-erated at any stage ofthe compression.
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
The built-in safety valve willby-pass the oil supplywhen the maximumpressure isreached, and apressure releasesystem can easily beoperated at any stage ofthe compression.
➟
60
This new mod-el, self con-tained, robustand sturdy, will ac-cept all semi-circularslotted dies, common tomost 130 kN tools.The tool features a double speedaction: a fast advancing speed forrapid approach of the dies to the con-nector and a slower more powerfulspeed for crimping.For ease of operation and comfort of theoperator the tool head can be fully ro-tated through 180 degrees.
The built-in safety valve will by-pass theoil supply when the maximum pressureis reached, and the pressure releasesystem can easily be operated at anystage of compression.
HYDRAULIC CRIMPING TOOL
general features
CrimpingforcekN
Weight kglength width
D i m e n s i o n s m m
130 473 144 5,5
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
400 240 185 400
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P3* 620x380xh135 2,5 ❉ —
HT 131-C
*Suitable for storage of the tool and 14 sets of dies
Hydraulicpressheadcomplete withquick automaticcoupler for connectionto a hydraulic pump with aworking pressure of 700 bar max,(see page 80)This new design with improved mechanical features, is suitable for
installing the same range of connectors as HT 131-C.
HYDRAULIC PRESSHEADS
general features
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
S T O R A G E
Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
*Suitable for storage of the head and 14 sets of dies
CrimpingforcekN
Max operatingpressure
barWeight kg
length width
D i m e n s i o n s m m
130 700 232 124 3,9
RHC 131
H y d r a u l i cpresshead completewith quick automatic couplerfor connection to a hydraulicpump with a working pressure of700 bar max, (see page 80).
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugs Insulated terminals H.V. lugs
400 240 400
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P8* 445x290xh115 1,2 — ❉
*Suitable for storage of the head and 14 sets of dies
CrimpingforcekN
Max operatingpressure
barWeight kg
length width
D i m e n s i o n s m m
130 700 216 80 3,1
RHM 132
400 240 185 400
VAL P8* 445x290xh115 1,2 — ❉
Type
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
general features
Particularly suitable for highvolume bench crimping.
H y d r a u l i c“C” head tool with a
large 42 mm jaw opening,for easier introduction/re-moval of large size com-pression terminations and
joints.The HT131L-C will accept all
semi-circular slotted dies, com-mon to most 130 kN tools. The tool features a double speed ac-tion: a fast advancing speed forrapid approach of the dies to theconnector and a slower more pow-erful speed for crimping.For ease of operation and comfortof the operator the tool head can befully rotated through 180 degrees.The built-in safety valve will by-passthe oil supply when the maximumpressure is reached, and the pres-sure release system can easily beoperated at any stage of compres-sion.
CrimpingforcekN
Weight kglength width
D i m e n s i o n s m m
130 520 144 6,2
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
61
HYDRAULIC CRIMPING TOOL
general features HT 131L-C
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
400 240 185 400
VAL P3* 620x380xh135 2,5 ❉ —*Suitable for storage of the tool and 12 sets of dies
Hydraulichead featur-
ing a large 42 mm jawopening; complete with quick
automatic coupler for connection toa hydraulic pump with a workingpressure of 700 bar max, (seepage 80).Is suitable for installing the samerange of connectors as HT 131-C.
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
HYDRAULIC PRESSHEAD
general features RHC 131LCrimping
forcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
130 700 270 124 4,8
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
400 240 185 400
*Suitable for storage of the head and 14 sets of diesVAL P8* 445x290xh115 1,2 — ❉
62
H y d r a u l i cpresshead com-plete with quick auto-matic coupler for connec-tion to a hydraulic pump with aworking pressure of 700 bar max,(see page 80).
RHU 131-C is suitable for installingthe same range of connectors asHT 131-UC.
RHU 131-CHYDRAULIC PRESSHEAD
general features
This robustand self con-tained tool will ac-cept the accessoriesfor performing the “DeepStepped Indent” system of crimp-ing on aluminium cables.
This tool will also accept the semi-circular slotted dies, common tomost 130 kN tools. HT 131-UC per-formance features are the same asthose of HT 131-C.
CrimpingforcekN
Weight kglength width
D i m e n s i o n s m m
130 488 149 5,4
HT 131-UC
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P3* 620x380xh135 2,5 ❉ —VAL 130** 360x280xh48 3,0 — ❉
* Suitable for storage of the tool and 14 sets of semi-circular slotted dies**Suitable for the storage of accessories for crimping aluminium
connectors
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
Alu lugs and splices
400 240 185 400 300
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P8* 445x290xh115 1,2 — ❉
VAL 130** 360x280xh48 3,0 — ❉
VAL 130-U*** 450x305xh80 5,0 — ❉
* Suitable for storage of the head and 14 sets of dies** Suitable for the storage of accessories for crimping aluminium connectors***Suitable for storage of the head, semi-circular slotted dies and dies for
crimping aluminium connectors
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
Alu lugsand splices
400 240 185 400 300
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
130 700 245 89 3,7
VAL 130
VAL P8
VAL 130-U
HYDRAULIC CRIMPING TOOL
general features
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
63
the head to utilisethe semi-circular slot-
ted dies which are com-mon to most 130 kN tools.
Also available is a series of dies forthe compression of DIN electrical con-nectors, and a die for cutting copper, alu-minium, aldrey, aluminium-steel and steelconductors.
M A I N A P P L I C A T I O N - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
630 300 240 630
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL ECW-H3D* 345x305xh90 4,2 — ❉
* Suitable for storage of the head and 10 sets of dies
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
230 700 290 120 5,2
E C W - H 3 D A C C E S S O R I E S F O R C U T T I N G C O N D U C T O R S
Die Type Cutting Capacity Conductor Type
WT2-3D
Ø 20 mm Cu, Alu, Aldrey and Alu-SteelØ 20 mm Extra flexible steel with ≥ 200 strands
Hydraulic presshead complete withquick automatic coupler for con-nection to a hydraulic pump with aworking pressure of 700 bar max,(see page 80)Adaptor type AU230-130D is avail-able as an optional extra enabling
For crimping upto 500 sqmm alu-
minium.Dies are available also
for crimping copper con-nectors.
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL 231* 470x273xh96 7,2 ❉ —
VAL 231
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
230 700 320 110 6,4
M A I N A P P L I C A T I O N - m a x s e c t i o n m m 2
Alu lugs and splices Cu lugs and splices
500 630
* Suitable for storage of the head and dies for aluminium compression
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL 230-630* 405x230xh145 4,4 ❉ —VAL MAT 230-630* 290x260xh70 3,1 — ❉
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
230 700 365 193 9,0
M A I N A P P L I C A T I O N - m a x s e c t i o n m m 2
Cu lugsand splices
Alu lugsand splices
“C” sleeveconnectors
H.V. lugsand splices
400 630 185 400
e x t r aenabling the
head to utilise thesemi-circular slotted
dies which are commonto most 130 kN tools.
Hydraulic presshead complete with quick automatic cou-pler for connection to a hydraulic pump with a workingpressure of 700 bar max, (see page 80).Adaptor type AU520-130C is available as an optional
ECW-H3D
RHU 231
RHU 230-630
RHU 520S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL 520* 405x230xh145 4,4 — ❉
VAL MAT 520** 500x310xh68 5,6 — ❉
VAL MAT 520
CrimpingforcekN
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
520 700 306 200 18,0
M A I N A P P L I C A T I O N - m a x s e c t i o n m m 2
Lugs and splicesH.V. overhead lines
1200 630
* Suitable for storage of the head** Suitable for storage of 10 sets of dies
* Suitable for storage of the head** Suitable for storage of the accessories
VAL MAT 230-630
an optionalextra enabling the
head to utilise the semi-circular slotted dies which
are common to most 130 kNtools.
Hydraulic presshead complete with quick automatic coupler for con-nection to a hydraulic pump with a working pressure of 700 barmax, (see page 80). It allows for crimping up to 630 sqmm alumini-um (according to HN 68 S90). Adapter AU 230-130 C, is available as
Hydraulic presshead complete withquick automatic coupler for connectionto a hydraulic pump with a working pres-sure of 700 bar max, (see page 80).
These tools are supplied without dies.For die selection, please refer to chart on pages 84 ÷ 88
VAL 520
This die is suitable to cut steel conductors (R ≤ 160 daN/mm2) having the most common strandings, i.e.:
19 x 1,2 = Ø est. 6,0 mm7 x 3,0 = Ø est. 9,0 mm
19 x 2,1 = Ø est. 10,5 mm19 x 2,3 = Ø est. 11,5 mm
VAL 230-630
HYDRAULIC PRESSHEADS
general features
Hydraulic cutting head completewith quick automatic coupler forconnection to a hydraulic pumpwith a working pressure of 700bar max, (see page 80)
TC050 features the same cuttingcapability as HT-TC051.
HYDRAULIC CUTTING HEAD
general features
64
Hand operated hy-draulic tool specifically de-signed to cut copper, aluminiumand telecommunications cableshaving a max overall diameter of50 mm.The tool features a double speed ac-tion: a fast advancing speed for rapidapproach of the blades to the cableand a slower more powerful speedfor cutting.The blades are manufactured fromhigh strength special steel, heattreated to ensure a long service life.The head can be easily opened toallow the cutting of running cables.The head can rotate by 90 degrees,to enable the operator to work in themost comfortable position.
HYDRAULIC CUTTING TOOL
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
Canvas Bag 010 510x152 0,15 ❉ —
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
Canvas bag 011 360x137 0,13 ❉ —
Maxcutting Ø
mm
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
50 700 330 126 3,4
Maxcutting Ø
mmWeight
kglength width
D i m e n s i o n s m m
50 497 129 4,38
Available also the 14.4 Volt cordless version type B-TC050 (see page 77)
INDUSTRIAL APPLICATION
TC 050
HT-TC051 features anautomatic safety valveto bypass oil when reachingmaximum pressure; a pres-sure release device can also beoperated at any stage of operation.
INDUSTRIAL APPLICATION
HT-TC051
65
Hand operatedhydraulic tool specif-
ically designed to cut cop-per, aluminium and telecom-
munications cables having a maxoverall diameter of 85 mm.New model, self contained, robustand sturdy.
The tool fea-tures a double
speed action: a fast ad-vancing speed for rapid ap-
proach of the blades to the cable anda slower more powerful speed forcutting.The blades are manufactured fromhigh strength special steel, heattreated to ensure a long service life.The head can easily be opened to al-low the cutting of running cables, andcan rotate by 180 degrees, to en-able the operator to work in themost comfortable position.HT-TC0851 features an automaticsafety valve to bypass oil when reach-ing maximum pressure; a pressurerelease device can also be operatedat any stage of operation.
HYDRAULIC CUTTING TOOL
general features
Hydraulic cuttinghead complete with
quick automatic coupler for con-nection to a hydraulic pump with aworking pressure of 700 bar max,(see page 80)
TC085 features the same cuttingcapability as HT-TC0851.
HYDRAULIC CUTTING HEAD
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL P7 727x202xh115 1,3 ❉ —
Maxcutting Ø
mmWeight
kglength width
D i m e n s i o n s m m
85 652,5 175 6,6
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Available upon request
VAL TC 085 465x155xh65 2,4 ❉ —
Maxcutting Ø
mm
Max operatingpressure
barWeight
Kglength width
D i m e n s i o n s m m
85 700 405 143 5,1
INDUSTRIAL APPLICATION
HT-TC0851
INDUSTRIAL APPLICATION
TC 085
66
Hydraulic cutting head specificallydesigned to cut copper and alu-minium cables having a max overalldiameter of 95 mm.
The head is complete with a quickautomatic coupler for connection toa hydraulic pump with a workingpressure of 700 bar max, (seepage 80).
HYDRAULIC CUTTING HEAD
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL 096 430x265xh145 4,2 ❉ —
Maxcutting Ø
mm
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
95 700 407 245 8,3
Handle designed for ease of operation
INDUSTRIAL APPLICATION
TC 096
67
Hydraulic cutting head specificallydesigned to cut copper, aluminiumand telecommunications cableshaving a max overall diameter of120 mm.
The head can easily be opened tocut running cables, and the handleallows the most comfortable posi-tioning of the head onto the cable tobe cut.
The head is complete with a quickautomatic coupler for connection toa hydraulic pump with a workingpressure of 700 bar max, (seepage 80).
HYDRAULIC CUTTING HEAD
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL TC 120 590x209xh84 4,9 ❉ —
T C 1 2 0 c u t t i n g c a p a c i t y - a f e w e x a m p l e s :
3x150 mm2 steel armoured Ø80 mm1000 mm2 Cu - EPR rubber insulated; Ø85 mm1000 mm2 Cu - EPR rubber insulated + lead sheath; Ø92 mm1000 mm2 Cu - EPR rubber insulated + lead sheath + PE sheath; Ø100 mm240 mm2 EPR rubber insulated
Maxcutting Ø
mm
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
120 700 556 185 10,3
Ca
ble
ty
pe
Opening head,to allow cuttingof runningcables
Handle designedfor ease ofoperation
INDUSTRIAL APPLICATION
TC 120
Hydraulic cutting head complete withquick automatic coupler for connec-tion to a hydraulic pump with a work-ing pressure of 700 bar max, (seepage 80)
TC025 has the same cutting capa-bility as HT-TC026.
HYDRAULIC CUTTING HEAD
general features
68
Hand operated hy-draulic tool specificallydesigned to cut copper,aldrey, aluminium, alumini-um-steel cables and steelropes, aluminium and steel rodshaving a max overall diameter of24 mm.The tool features a double speed ac-tion: a fast advancing speed for rapidapproach of the blades to the cableand a slower more powerful speedfor cutting.The blades are manufactured fromhigh strength special steel, heattreated to ensure a long servicelife.The head can rotate by 180 de-grees, to enable the operator towork in the most comfortable posi-tion, and can easily be opened toallow the cutting of running cables.HT-TC026 features an automaticsafety valve to bypass oil whenreaching maximum pressure; apressure release device can also beoperated at any stage of operation.
HYDRAULIC CUTTING TOOL
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
Canvas bag 001 420x140 0,13 ❉ —
C U T T I N G
MATERIALTENSILE
STRENGHT(da N/mm2)
COPPER ≤ 41ALUMINIUM ≤ 20ALMELEC ≤ 34
MULTI STRANDS STEEL ≤ 180
(STRANDS Q.TY ≥ 200)
STEEL≤ 60≤ 42
COPPER≤ 30≤ 25
ALUMINIUM ≤ 16
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
Canvas bag 007 350x105 0,13 ❉ —
Maxcutting Ø
mm
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
24 700 227 87 2,0
Maxcutting Ø
mmWeight
kglength width
D i m e n s i o n s m m
24 382 129 3,2
RO
PE
S &
CO
ND
UC
TO
RS
RO
DS
STEEL ≤ 180
ACSR ≤ 180
OVERHEAD LINE APPLICATION
HT-TC026
OVERHEAD LINE APPLICATION
TC 025
Available also the 14.4 Volt cordless version
type B-TC025 (see page 76)
69
C A P A C I T Y
HT-TC 026TC 025 B-TC025
HT-TC 041TC 04 B-TC04
MAX CUTTING DIAMETER (mm)
24 4024 4024 40
18 18
24 (1) 40 (2)
13 1816 2020 3023 3224 40
Hand operat-ed hydraulic
tool specificallydesigned to cut
copper, aldrey, aluminium, alu-minium-steel cables and steelropes, aluminium and steel rods
having a max overall diameter of40 mm.New model, even more self con-tained, robust and sturdy.The blades are manufactured fromhigh strength special steel, heattreated to ensure a long service life.The head can rotate by 90 degrees,to enable the operator to work inthe most comfortable position, andcan easily be opened to allow cut-ting of running cables.
HT-TC041 features an automaticsafety valve to bypass oil whenreaching maximum pressure; apressure release device can also beoperated at any stage of operation.
HYDRAULIC CUTTING TOOL
general features
Hydraulic cutting head com-plete with quick automaticcoupler for connection to a
hydraulic pump with a workingpressure of 700 bar max, (seepage 80)TC04 has the same cutting capa-bility as HT-TC041.
HYDRAULIC CUTTING HEAD
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P7 727x202xh115 1,3 ❉ —
Maxcutting Ø
mmWeight
kglength width
D i m e n s i o n s m m
40 550 144 5,8
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL 04 350x125xh68 2,0 ❉ —
Maxcutting Ø
mm
Max operatingpressure
barWeight
kglength width
D i m e n s i o n s m m
40 700 330 108 4,0
FEW INDICATIVE EXAMPLES:7 x 3,0 : Ø est. = 9,0 mm
19 x 2,1 : Ø est. = 10,5 mm19 x 2,3 : Ø est. = 11,5 mm
FEW INDICATIVE EXAMPLES:(1) (2) 26 x 2,50 + 7 x 1,95 : Ø est. = 15,85(1) (2) 26 x 3,06 + 7 x 2,38 : Ø est. = 19,38(1) (2) 26 x 3,60 + 7 x 2,80 : Ø est. = 22,80
(2) 54 x 3,50 + 19 x 2,10 : Ø est. = 31,50(2) 54 x 4,36 + 19 x 2,62 : Ø est. = 39,20
(1) (2)
OVERHEAD LINE APPLICATION
HT-TC041
OVERHEAD LINE APPLICATION
TC 04
Available also the 14.4 Volt cordless versiontype B-TC04 (see page 77)
Units CP-W-KVHydraulic units suitable for a safe exploration and eventual cutting on accidentally live L.V. / M.V. cables with nominal voltage up to 30 kV (36 kV maximum working voltage acceptable).
A
C
E
BD
Nut splitting heads RHTD
Hydraulic nut splitting head completewith automatic quick coupler. For operating the head must be joinedto a hydraulic pump developing a pres-sure of 700 bar (see page 80).
Suitable for splitting nutsmm
Max operatingpressure
bar Weight
kg
17 (M12) ÷ 24 (M16) 700 1,76
*Supplied with the head
70
Piercing heads RHTSPECIAL TOOLS
Hydraulic piercing head complete withautomatic quick coupler, for piercingholes of various diameters in copper,aluminium and steel bars with max. thickness of 10 mm.This compact and handy tool is widelyused for transformer room connec-tions, control switch boards and powerplants.For operation the head must be joinedto a hydraulic pump developing a pres-sure of 700 bar (see page 80).
Max piercing Ø
mmType
Max operatingpressure
bar Max hole distance from
bar edge (mm)Weight
kglength width
Dimens ions mm
RHT 160 17 30 700 240 153 6,5RHT 160-60N 17 60 700 240 181 9,2
Storage type Dimensions mm Weight kg
VAL 160* 283x180xh100 2,3
Piercing Ø mm 6,5 8,5 10,5 13 15 17A v a i l a b l e a c c e s s o r i e s ( t o b e o r d e r e d s e p a r a t e l y ) :
Set die - indentor RT 6,5 RT 8,5 RT 10,5 RT 13 RT 15 RT 17
*Supplied with the head
Flexible hoses
Quick couplers
ACCESSORIES
High pressure flexible hoses for joininghydraulic heads to pumps.In addition to the standard versions list-ed below alternative hose lengths areavailable, upon request :
Q 38-MMale automatic coupler for hydraulicheads.
Q 38-FFemale automatic coupler for hydraulicpumps and flexible hoses.
Q 38-MSMale automatic coupler for flexiblehoses.
TF 300-Q 38 FM3 mt length flexible hose fitted with anautomatic female quick coupler and amale quick coupler .
TF 600-Q 38 FM6 mt length flexible hose fitted with anautomatic female quick coupler and a3/8" NPT male threaded bush.
TF 300-Q 38 F3 mt length flexible hose equipped withautomatic female quick coupler at oneend and male threading at the otherend.
Max cutting ØmmUnit Type Dimensions
pumpDimensions
headWeight
kg
CP 086-W-1000-KV 85 689x200xh167 369,5x135 20,5CP 096-W-1000-KV 95 689x200xh167 394x242 22,4CP 120-W-1000-KV 120 689x200xh167 481,5x175 24,4
Storage type Dimensions mm Weight kg
VAL CP096* 785x430xh175 14,0*Supplied with the unit
RHTD 1724
Suitable for splitting nutsmm
Max operatingpressure
bar Weight
kg
27 (M18) ÷ 41 (M27) 700 4,6
RHTD 3241
Suitable for splitting square andhexagonal nuts or fastening bushes
mm
Max operatingpressure
bar Weight
kg
27 (M18) ÷ 41 (M27) 700 4,9
RHTD 3241T
Storage type Dimensions mm Weight kg
VAL P4* 315x300xh95 0,93
RHTD 3241 RHTD 1724 RHTD 3241T
66 40,5 7736 25 41208 150,5 22275,5 54 75,516 7,5 21,5
ABCDE
D I M E N S I O N S m m :
Q 38-M Q 38-F Q 38-MS
GS approvaln. ET 96129
14
.4 V
OLT
CO
RD
LE
SS
HY
DR
AU
LIC
TO
OL
S
72
• Cordless tooling can be operated with one hand.• Balanced tool for greater control.• Head rotates for ease of operation in confined spaces.• Battery condition displayed after every crimping operation, to show the
residual battery power.• The tools are fitted with a maximum pressure valve to indicate a correct
crimping operation or the full extent of the blade travel.
• Extremely quiet in operation with very little vibration.• Durable moulded body offering high resistance to wear and damage in all
operating conditions.• The plastic or steel carrying case can accomodate the tool and all the ac-
cessories.• The B 50, B 131-C and B 131-UC will accept die sets common to the
Cembre 50 and 130 kN tooling range.
CORDLESS TOOL FEATURES
Reinforced mouldednylon body
Switch protectedagainst accidentaloperation
Pressure releasebutton
High power battery
Head rotates through 180°
Battery condition display
Motor ventilation
High power battery
Sculptured bodyfor optimum comfortBalanced tool
for greatercontrol
Wriststrap
Risks due to vibration(EEC Directive 06.14.1989 no 89/392, section 2.2)Tests performed in accordance with specifications UNI ENV 25349 and UNI EN 28662 pt. 1, in operating conditions moresevere than normal, certify that the weighed root mean square, in frequency of the acceleration the upper limbs areexposed to, for each biodynamic reference axis, does not exceed 2.5 m/sec2.
B 50 Acoustic Noise
(EEC Directive 06.14.1989 n° 89/392, annexe 1, sec-tion 1.7.4 point f)• The weighted continuous acoustic pressure level equiva-
lent A at the workplace LpA is equal to 81.1 dB (A)• The maximum value of the weighted acoustic displacement
pressure C at the workplace LpCpeak is less than < 130 dB (C)• The acoustic power level emitted by the machine LWA is
equal to 85.6 dB (A)
B 131-C Acoustic Noise
(EEC Directive 06.14.1989 n° 89/392, annexe 1, sec-tion 1.7.4 point f)• The weighted continuous acoustic pressure level equiva-
lent A at the workplace LpA is equal to 72.4 dB (A)• The maximum value of the weighted acoustic displacement
pressure C at the workplace LpCpeak is less than < 130 dB (C)• The acoustic power level emitted by the machine LWA is
equal to 83.1 dB (A)
Socket for 12V dcexternal supply
Available upon request,the B 50-KV version,for power supply companiesand B 50LA suitable for usewith “W” dies.
B 50-KV
B 50LA
73
14.4 V cordlesshydraulic crimp-
ing tool, lightweightand balanced for single
hand operation. The crimping headcan rotate through 180° for ease ofoperation. The B 50 will accept diesets common to the Cembre 50 kNtooling range. Fitted with a maxi-
mum hydraulic pressure valve.
Complete with a battery conditiondisplay, which after every operationindicates the residual battery power. Extremely quiet in operation, withvery little vibration. Ergonomicallydesigned with a sculptured body foroperator comfort.
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P5* 543x412xh130 2,1 ❉ —
14.4 V CORDLESS HYDRAULIC CRIMPING TOOL
general features B 50
L.V. lugsand splices
Insulatedterminals
Endsleeves
“C” sleeveConnectors
240 70 50 70
CrimpingforcekN
Weight kg(with battery)Battery
length height width
D i m e n s i o n s m m
50 297 302 94 14,4 V 2.0 Ah 3,85
Battery conditiondisplay
Switch protectedagainst accidental
operation
Automatic slot-in battery
These tools are supplied without dies.For die selection, please refer to chart on pages 84÷88.
Motor ventilationLightweight and balanced
*Suitable for storing:• Basic tool with battery, wrist
strap and shoulder strap• Spare battery• Battery charger• 21 die sets
Also available in the “B50-G”version, featuring protectedpush buttons modified toallow the operator to wearprotection gloves.
74
• 14.4 V cordless hydraulic crimp-ing tool, lightweight and balancedfor single hand operation. Thistool will accept all semi-circularslotted dies, common to most130 kN tools.
• The tool features a double speedaction: a fast advancing speed forrapid approach of the dies to theconnector and a slower morepowerful speed for crimping.
• For ease of operation and com-fort of the operator the tool headcan be fully rotated through 180degrees.
• The tool is powered by 14.4 V dcNiCd battery.
• A balanced tool for optimum con-trol.
• Quiet in operation with very littlevibration.
• Lightweight construction enablesthe operator to hold the tool inone hand and to position the con-nector with the other hand.
• The operating buttons, crimp/re-lease, are mechanically inter-locked, to prevent accidental op-eration of the tool.
• A microprocessor controls thetool operation and automaticallycuts out the motor, on completionof the crimping operation, savingenergy and extending battery life.
• The residual battery capacity isautomatically displayed afterevery cycle.
• Fitted with an integral socket, forconnection to a 12 V dc externalpower supply/vehicle battery.
• The tool is provided with a maxi-mum pressure valve.
B 131-C14.4 V CORDLESS HYDRAULIC CRIMPING TOOL
general features
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveConnectors
H.V. lugsand splices
400 240 185 400
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL B 131* 528x404xh130 6,4 ❉ —
CrimpingforcekN
Battery Weight kg(with battery)length height width
D i m e n s i o n s m m
130 420 250 100 14,4 V 2.0 Ah 7,4
B 131L-CCrimping
forcekN
Battery Weight kg(with battery)length height width
D i m e n s i o n s m m
130 460 250 100 14,4 V 2.0 Ah 8,2
*Suitable for storing:- Basic tool complete with
battery and shoulder strap- Spare battery- Battery charger- Suitable for storing 12 sets
of semi-circular slotted dies
Available upon request:- ESC600 cable for connection
to a 12V dc externalpower supply/vehicle batterylength 6 m.
Also available in the “B131L-C”version, featuring a large42 mm jaw opening, for aneasier introduction/removal oflarge size compression termi-nations and joints.
general features
These tools are supplied without dies.For die selection, please refer to chart on pages 84÷88.
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveConnectors
H.V. lugsand splices
400 240 185 400
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL B 131 528x404xh130 6,4 ❉ —
75
• For ease of operation and com-fort of the operator the tool headcan be fully rotated through 180degrees.
• The tool is powered by 14.4 V dcNiCd battery.
• A balanced tool for optimum con-trol.
• Quiet in operation with very littlevibration.
• Lightweight construction enablesthe operator to hold the tool inone hand and to position the con-nector with the other hand.
• The operating buttons, crimp/re-lease, are mechanically inter-
• 14.4 V cordless hydraulic crimp-ing tool, lightweight and balancedfor single hand operation. Thistool will accept the accessoriesfor performing the “Deep SteppedIndent” system of crimping on alu-minium cables.
• This tool will also accept thesemicircular slotted dies, com-mon to most 130 kN tools.
• The tool features a double speedaction: a fast advancing speed forrapid approach of the dies to theconnector and a slower morepowerful speed for crimping.
locked, to prevent accidental op-eration of the tool.
• A microprocessor controls thetool operation and automaticallycuts out the motor, on completionof the crimping operation, savingenergy and extending battery life.
• The residual battery capacity isautomatically displayed afterevery cycle.
• Fitted with an integral socket, forconnection to a 12 V dc externalpower supply/vehicle battery.
• The tool is provided with a maxi-mum pressure valve.
14.4 V CORDLESS HYDRAULIC CRIMPING TOOL
general features B 131-UC
M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2
L.V. lugsand splices
Insulatedterminals
“C” sleeveConnectors
H.V. lugsand splices
All lugsand splices
400 240 185 400 300
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL B 131* 528x404xh130 6,4 ❉ —
CrimpingforcekN
Battery Weight kg(with battery)length height width
D i m e n s i o n s m m
130 435 250 100 14,4 V 2.0 Ah 7,4
*Suitable for storing:- Basic tool complete with
battery and shoulder strap- Spare battery- Battery charger- Suitable for storing 12 sets
of semi-circular slotted dies
Battery condition display
Operating and pressure releasebuttons mechanically interlocked
Socket for 12÷14.4 V dcexternal power supply
High power battery
These tools are supplied without dies.For die selection, please refer to chart on pages 84÷88.
Cable type ESC600
Available upon request:- ESC600 cable for connection
to a 12V dc externalpower supply/vehicle batterylength 6 m.
Easy to operate withonly one hand
Motorventilation
76
14.4 V cordless hydrauliccutting tool, lightweight andbalanced for single hand op-eration. Specifically designedto cut copper, aldrey, alumini-um, aluminium-steel cables andsteel ropes, aluminium and steelrods having a max overall diame-ter of 24 mm.The blades are manufac-tured from high strengthspecial steel, heat treatedto ensure a long servicelife. The crimping head canrotate through 180° forease of operation. Fitted with amaximum hydraulic pressure valve.Complete with a battery conditiondisplay, which after every operationindicates the residual battery power.
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P5* 543x412xh130 2,1 ❉ —
C U T T I N G C A P A C I T Y
MATERIALTENSILE
STRENGHT(daN mm2)
MAX CUTTING DIAMETER (mm)
B-TC025 (1) B-TC04 (2)
COPPER ≤ 41 24 40ALUMINIUM ≤ 20 24 40ALMELEC ≤ 34 24 40
MULTI STRANDS STEEL≤ 180 18 18
(STRANDS Q.TY ≥ 200)24 (1) 40 (2)
STEEL≤ 60 13 18≤ 42 16 20
COPPER≤ 30 20 30≤ 25 23 32
ALUMINIUM ≤ 16 24 40
Head rotatesthrough 180°
Head rotatesthrough 90°
Replacementblades Safety Guard
RO
PE
S &
CO
ND
UC
TO
RS
RO
DS
INDICATIVE EXAMPLE:7 x 3,0 : Ø est. = 9,0 mm
19 x 2,1 : Ø est. = 10,5 mm19 x 2,3 : Ø est. = 11,5 mm
STEEL ≤ 180
INDICATIVE EXAMPLE:(1) (2) 26 x 2,50 + 7 x 1,95 : Ø est. = 15,85(1) (2) 26 x 3,06 + 7 x 2,38 : Ø est. = 19,38(1) (2) 26 x 3,60 + 7 x 2,80 : Ø est. = 22,80
(2) 54 x 3,50 + 19 x 2,10 : Ø est. = 31,50(2) 54 x 4,36 + 19 x 2,62 : Ø est. = 39,20
ACSR ≤ 180
14.4 V CORDLESS HYDRAULIC CUTTING TOOL
general features
Maxcutting
mmWeight kg
(with battery)Batterylength height width
D i m e n s i o n s m m
see table 304 302 94 14,4 V 2.0 Ah 4,3
*Suitable for storing:• Basic tool with battery, wrist
strap and shoulder strap• Spare battery• Battery charger
OVERHEAD LINE APPLICATION
B-TC025
Extremely quiet in operation, withvery little vibration. Ergonomicallydesigned with a sculptured body foroperator comfort.
Also available in the “B-TC025G”version, featuring protectedpush buttons modified to allowthe operator to wear protectiongloves.
every operation indicates the resid-ual battery power. Extremely quiet in operation, withvery little vibration. Ergonomicallydesigned with a sculptured body foroperator comfort.
14.4 V CORDLESS HYDRAULIC CUTTING TOOL
general features
77
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P9* 543x412xh130 2,1 ❉ —
Maxcutting
mmWeight kg
(with battery)Batterylength height width
D i m e n s i o n s m m
50 418 302 94 14,4 V 2.0 Ah 5,68
INDUSTRIAL APPLICATION
B-TC050
• The residual battery capacity is au-tomatically displayed after everycycle.
• Fitted with an integral socket, forconnection to a 12 V dc externalpower supply/vehicle battery.
• The tool is provided with a maxi-mum pressure valve.
• Lightweight construction enablesthe operator to hold the tool inone hand and to position the ca-ble with the other hand.
• The operating buttons, cut/re-lease, are mechanically inter-locked, to prevent accidental op-eration of the tool.
• A microprocessor controls thetool operation and automaticallycuts out the motor, on completionof the cutting operation, savingenergy and extending battery life.
• 14.4 V cordless hydraulic cuttingtool specifically designed cut cop-per, aldrey, aluminium, alumini-um-steel cables and steel ropes,aluminium and steel rods havinga max overall diameter of 40 mm.
• Lightweight and balanced for sin-gle hand operation.
• The tool features a double speedaction: a fast advancing speed forrapid approach of the blades tothe cable and a slower more pow-erful speed for cutting.
• For ease of operation and com-fort of the operator the tool headcan be rotated through 90 de-grees.
• The tool is powered by 14.4 V dcNiCd battery.
• A balanced tool for optimum con-trol.
• Quiet in operation with very littlevibration.
14.4 V CORDLESS HYDRAULIC CUTTING TOOL
general features
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL BTC04* 520x400xh410 6,4 ❉ —
Maxcutting
mmWeight kg
(with battery)Batterylength height width
D i m e n s i o n s m m
40 497 250 100 14,4 V 2.0 Ah 7,8
*Suitable for storing:• Basic tool complete with battery
and shoulder strap• Spare battery• Battery charger
OVERHEAD LINE APPLICATION
B-TC04
*Suitable for storing:• Basic tool with battery,
wrist strap andshoulder strap
• Spare battery• Battery charger
14.4 V cordless hydraulic cuttingtool, lightweight and balanced for sin-gle hand operation. Specifically de-signed to cut copper, aluminium andtelecommunication cables having amax overall diameter of 50 mm.The blades are manufactured fromhigh strength special steel, heattreated to ensure a long service life.The head can be easily opened toallow the cutting of running cables.The head can rotate by 90 degrees,to enable the operator to work in themost comfortable position.Fitted with a maximum hydraulicpressure valve. Complete with a bat-tery condition display, which after
Also available in the “B-TC050G”version, featuring protected
push buttons modified to allowthe operator to wear protection
gloves.
14.4 V cordless hydraulic toolfor punching holes from 15,2 upto 47 mm diameter in the side wallof trunking without the need for predrilling.Lightweight and balancedfor single-hand operation.The punching head canrotate through 180° forease of operation.Complete with battery con-dition display, which after everyoperation indicates the residual bat-tery power.Extremely quiet in operation, withvery little vibration. Ergonomicallydesigned with a sculptured body foroperator comfort.Also available in the hand operatedmechanical version MT-FC47 (seepage 50).
B-FC47
S T O R A G E
Type Dimensions mm Weightkg
Suppliedwith the tool
Availableupon request
VAL P9 543x412xh130 2,1 ❉ —
14.4 V CORDLESS HYDRAULIC TOOL FOR PUNCHING HOLES
general features
Max holepunch Ø mm
Weight kg(with battery)Battery
length height width
D i m e n s i o n s m m
47 351 302 94 14,4 V 2.0 Ah 5
*Suitable for storing:• Basic tool with battery, wrist strap
and shoulder strap• Spare battery• Battery charger
Maximumthickness ofmild steel
mmPart Ref.
15,2 .598 Pg 9 - -16,2 .638 - ISO-16 -17,5 .688 - - -18,6 .732 Pg 11 - -19,1 .750 - - -20,4 .803 Pg 13,5 ISO-20 -20,6 .812 - - -22,5 .885 Pg 16 - 1/2” 223,8 .937 - - -25,4 1.000 - ISO-25 -27,0 1.063 - - -28,3 1.115 Pg 21 - 3/4”28,6 1.125 - - -30,5 1.210 - - -31,8 1.250 - - -32,5 1.280 - ISO-32 -34,6 1.357 - - 1”34,9 1.375 - - -37,0 1.457 Pg 29 - -38,1 1.500 - - - 340,5 1.594 - ISO-40 -41,3 1.625 - - -43,2 1.699 - - 1-1/4”44,5 1.750 - - -47,0 1.850 Pg 36 - -
RD 15,2 SRD 16,2 S*RD 17,5 S*RD 18,6 S RD 19,1 S*RD 20,4 SRD 20,6 S*RD 22,5 SRD 23,8 S*RD 25,4 S*RD 27 S*RD 28,3 SRD 28,6 S*RD 30,5 S*RD 31,8 S*RD 32,5 S*RD 34,6 S*RD 34,9 S*RD 37 SRD 38,1 S*RD 40,5 S*RD 41,3 S*RD 43,2 S*RD 44,5 S*RD 47 S
Ø mm Ø inch Pg ISO Tube
H o l e D i m e n s i o n s
*available upon request
Table denoting thepunch/die set reference,
for each hole size.Suitable for punching holesin mild steel, fibreglass or
plastic material,up to 3 mm thick.
78
HY
DR
AU
LI
C
PU
MP
S
PO 7000HYDRAULIC PUMPS
Foot operated double speed pump, de-veloping a maximum pressure of 700bar. The pump is supplied with 3 m long highpressure flexible hose complete with fe-male self-lock quick coupler.Pressure can be withdrawn at any timeduring operation by depressing the re-lease lever. A solid shaped stand givesthe pump stability during operation.
Operatingpressure
barWeight
kg
700 680 200 163 9,2length width height
D i m e n s i o n s m m
*Supplied with the pump
Storage type Dimensions mm Weight kg
VAL 22* 705x285xh180 6,4
CPP-1The CPP-1 air hydraulic power unit in-tensifies an air supply of 3÷6 bar (60-120 psi) to a power crimping or cuttingforce of up to 700 bar (10.000 psi) de-pending upon the input pressure.The control pedal allows for advancingand pressure release at any stage ofthe operation.
The unit is provided with a 3 m highpressure flexible hose, including a 3/8"NPT female self-lock quick coupler.
Operatingpressure
barWeight
kg
700 220 220 350 12length width height
D i m e n s i o n s m m
CPE-0 CPE-0-110Type CPE-0Sturdy electrically driven (220 V -50 Hz) hydraulic pump, developing max-imum oil pressure of 700 bar (10.000psi). The control pedal allows for ad-vancing and pressure release uponcompletion of the operation.Furthermore, pressure can be releasedat any stage of the operation, by meansof the push button on the top of the unit.
Type CPE-0-110, electro-hydraulic pump (110 V - 50 Hz) is also available.
Operatingpressure
barWeight
kg
700 356 182 321 25
CPE-0
length width height
D i m e n s i o n s m m
Operatingpressure
barWeight
kg
700 356 182 321 25
CPE-0-110
length width height
D i m e n s i o n s m m
Portable electro-hydraulic pump, operat-ing at 24V dc by battery for independentuse, developing 700 bar pressure; it fea-tures an integral socket for connection toan external 24 V dc supply. It is also avail-able insulated and operated by remotepneumatic pedal. B70M-P24 is suppliedwith following accessoires:– 3 m flexible hose complete
with male + female 3/8" NPT self-lock quick couplers
– Remote control – Shoulder strap– External battery charger– Canvas holdall for carrying accessories
Additional accessories available on request:– Spare 24V dc battery – 24 V dc external supply connection cables:
• ESC 300 CEE with 24 V dc CEE type plug (3 m length)• ESC 600 with crocodile clips (6 m length)
– RCP-B70 remote foot pedal controller – RCH-B70 remote hand controller (attached 3 m length flexible hose)– TRS-B70 canvas rucksack (for carrying the pump)– SH-B70 hook (for hanging the pump from a ladder)
Operatingpressure
barWeight
kg
700 390 163 323 9,2*length width height
D i m e n s i o n s m m
*without accessories
CPE-0-P12NPortable electro-hydraulic pump, oper-ating at 12 V, and developing a pres-sure of 700 bar. This pump can eitherbe operated by battery for independentuse, or by an external 12V dc supply.Complete with internal battery charger,CPE-0-P12N is supplied also with fol-lowing accessories:– 3 m flexible hose complete with male + female 3/8" NPT self-lock quick couplers
– Remote control cable– External 12V dc supply cable– Back-up 12V dc battery– Battery charger 240 V ac supply cable– Canvas holdall for carrying accessories
Additional accessories available on request:– Remote pedal control – External battery charger
Operatingpressure
barWeight
kg
700 343 162 353 19,5*length width height
D i m e n s i o n s m m
*without accessories
80
B70M-P24
HY
DR
AU
LI
C
UN
IT
S
CP 1096(pump P0 7000 + head TC 096)Max cutting Ø
mmDimensionspump mm
Dimensionshead mm
Weightkg
95 680x200xh163 407x245 18,8
Storage type Dimensions mm Weight kg
VAL CP 096* 785x430xh175 14,0*Supplied with the unit
CPU 1230-3D(pump P0 7000 + head ECW-H3D)
CrimpingforcekN
Dimensionspump mm
Dimensionshead mm
Weightkg
230 680x200xh163 315x120 15,7
Storage type Dimensions mm Weight kg
VAL 22-3* 705x285xh180 12,6*Supplied with the unit, suitable for storage of 10 dies sets
L.V. lugsand splices
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
630 300 240 630
CPU 1131-C(pump P0 7000 + head RHU 131-C)
CrimpingforcekN
Dimensionspump mm
Dimensionshead mm
Weightkg
130 680x200xh163 245x89 14,2
Storage type Dimensions mm Weight kg
VAL 22-C* 705x285xh180 11,6*Supplied with the unit, suitable for storage of 14 dies sets
L.V. lugsand splices
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
Alu lugsand splices
400 240 185 400 300
CP 1131
Hydraulic units are obtained by combining the double stage hydraulic foot pump with the various hy-draulic press heads featured on previous pages.The use of the double stage pump considerably reduces operating time.
(pump P0 7000 + head RHC 131)
82
HYDRAULIC UNITS
CrimpingforcekN
Dimensionspump mm
Dimensionshead mm
Weightkg
130 680x200xh163 232x124 14,4
Storage type Dimensions mm Weight kg
VAL 22-C* 705x285xh180 11,6*Supplied with the unit, suitable for storage of 14 dies sets
L.V. lugsand splices
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
Insulatedterminals
“C” sleeveconnectors
H.V. lugsand splices
400 240 185 400
DI
E
SE
LE
CT
OR
C
HA
RT
84
CO
PP
ER
CO
ND
UC
TO
RS
Conductor Size sqmmTERMINAL SPLICE NEST INDEN-
TOR DIE SET NEST INDENTOR NEST INDENTOR DIE SET NEST INDENTOR DIE SET NEST INDENTOR DIE SETDIE SET DIE SETDIE SETLow str. Flex
CONDUCTORAPPLICATION
HYDRAUL IC TOOLS
CONNECTORHT 45 - E
HT 51RH 50B 50
HT 81-URHU 81
HT 120 and tools and heads
with 130 kN crimping forceECW-H3D RHU 520
4 ÷ 6 A 1-M.. MA 1
MA 2.3
MA 5
MA 7
MA 10
ME 1
MA 2.3-50
MA 5-50
MA 7-50
MA 10-50
MA 14-50
MA 19-50
MA 24-50
PA 5-50
PA 10-50
PA 19-50
PA 24-50
ME 2
ME 3
ME 5
ME 7
ME 10
ME 14
ME 19
ME 24
ME 9-50
ME 12-50
ME 17-50
ME 20-50
ME 29-50
ME 35-50
ME 14-50
ME 19-50
ME 24-50
ME 30-50
ME 37-50
PA 1
PA 10
PA 5
A 19-M..
A 24-M..
A 30-M..
A 37-M..A 37-4ESI
A 48-M..A 48-4ESI
A 60-M..A 60-4ESI
A 80-M..A 80-4ESI
A 9-M..
A 12-M..
A 17-M..
A 20-M..
A 29-M..
A 35-M..
A 40-M..
A 100-M..A 100-4ESI
A 120-M..A 120-4ESI
A 160-M..A 160-4ESI
A 200-M..
10
16
25
35 25*35*
50 35*50*
70 50*70*
95 70*95*
120 95*120
150 120*150*
185 150*185*
240 185*240*
300 240300
A 2-M..A 2-P12A 3-M..A 3-P14A 5-M..A 5-P16A 7-M..A 7-P20A 10-M..A 10-P25A 14-M..A 14-P30
L 1-ML 1-P
L 19-ML 19-PL 24-ML 24-PL 30-ML 30-PL 37-ML 37-PL 48-ML 48-P
L 60-M..
L 80-M..
L 100-M..
L 120-M..
L 160-M..
L 200-M..
L 2-ML 2-PL 3-ML 3-PL 5-ML 5-PL 7-ML 7-PL 10-ML 10-PL 14-ML 14-P
2A 19-M..
2A 24-M..
2A 30-M..
2A 37-M..
2A 48-M..
2A 60-M..
2A 80-M..
2A 100-M..
2A 120-M..
2A 3-M..
2A 5-M..
2A 7-M..
2A 10-M..
2A 14-M..
400 300
500 400
630 500
800 630
1000 800
35
50
70
95
120
150
185
1
1
1
1
ME 9
ME 12
ME 17 MA 17-50 PA 19-50
ME 20
1
2
2
2
1
2
2
2
2
1
2
2
2
3
3
ME 40-50 3
ME 1-50
ME 2-50
ME 3-50
ME 5-50
ME 7-50
ME 10-50
1
1
1
1
1
2
2
2
2
3
3
ME 48-50 3
ME 2-C
ME 3-C
ME 5-C
ME 7-C
ME 10-C
ME 14-C
ME 19-C
ME 24-C
ME 30-C
ME 37-C
1
1
1
1
1
1
1
1
1
1
ME 48-C
ME 60-C
ME 80-C
2
3
ME 9-C
ME 12-C
ME 17-C
ME 20-C
ME 29-C
1
1
1
1
1
ME 35-C
ME 40-C
1
1
3 ME 80-3D
ME 100-3D
ME 120-3D
2
2
2
ME 2.19-U
ME 3.14-U
ME 5.7-U
ME 10.24-U
ME 3.14-U
ME 2.19-U
ME 10.24-U
ME 30-U
ME 37-U
ME 48-U
1
1
1
2
2
2
2
2
2
3
ME 9.20-U
ME 12.17-U
ME 12.17-U
ME 9.20-U
ME 29-U
ME 35-U
ME 40-U
1
2
2
2
2
2
3
1
MA 9 PA 101
MA 2-C
PA 10-C
PA 24-C
PA 48-C
PA 60-C
PA 10-C
PA 24-C
PA 48-C
1
MA 3-C 1
MA 5-C 1
MA 7-C 1
MA 10-C 1
MA 14-C 1
1
1
1
1
1
1
1
1
MA 20-50 PA 19-501
MA 9-50 PA 10-501
MA 19-C 1
MA 24-C 1
MA 30-C 1
MA 37-C 1
MA 48-C 1
MA 60-C 1
MA 9-C 1
MA 12-C 1
MA 17-C 1
MA 20-C 1
MA 29-C 1
MA 35-C 1
MA 40-C 1
1
1
1
1MA 3.5-U
MA 7.14-U
MA 10.19-U
MA 7.14-U
1
1
MA 10.19-UMA 19-U 1
1
MA 9.17-U
MA 12.20-U
MA 9.17-U
1
1
1
MA 12.20-U
MA 29.80-U
MA 35-U
1
1
MA 40-U
MA 24-U
MA 30-80-U
MA 37-U
1
1
MA 48-U
1
PA 100-3D
PA 120-3D
MA 80-3D 1
MA 100-3D 1
MA 120-3D 1
MK 34-520
MK 38-520
MK 42-520
2
2
2
PA 120-520
PA 200-520
MA 80-520 1
MA 100-520 1
MA 120-520 1
MK 50P-520
MK 52-520
2
2
MA 160-520 1
MA 200-520 1
Adaptor
AU 230-130 D
with die set MA..-C
and indentor PA..-C
Adaptor
AU 520-130 C
with die set MA..-C
and indentor PA..-C
Adaptor
AU 230-130 D
with die set
ME..-C
Adaptor
AU 520-130 C
with die set
ME..-C
Adaptor
AU 230-130 D
with die set MA..-C
and indentor PA..-C
Adaptor
AU 520-130 C
with die set MA..-C
and indentor PA..-C
Adaptor
AU 230-130 D
with die set
ME..-C
Adaptor
AU 520-130 C
with die set
ME..-C
D I E S E L E C T O R C H A R T
2
3
2
2
N.B.: Number inside symbol indicates the number of crimps on A-M barrel= Hexagonal crimp (ose one size up with fine stranded conductors, E.G.: 95❏ fine stranded use A19-.. + ME 19 or A 20-.. + ME 20) * Contact Cembre for appropriate die set= Indent crimp
A..-M..
A..-P..
L..-M..
L..-P..
2A..-M..
A..- 4ESI
85
CO
PP
ER
CO
ND
UC
TO
RS
Conductor SizeFlex sqmm TERMINAL NEST INDENTOR DIE SET NEST INDENTORDIE SET
Conductor SizeFlex sqmm TERMINAL DIE SET
APPLICATION CONNECTOR HT 81-URHU 81
10
MN 12 F-50
MN 17 F-50
ANE 2-M..
ANE 3-M..
ANE 5-M..
ANE 7-M..
ANE 2-P12
ANE 3-P14
ANE 2-U..
ANE 3-U..
ANE 5-P16
ANE 7-P20
ANE 9-M..
PKD 16..
PKD 25..
PKD 35..
PKD 50..
PKC 16..
PKC 25..
PKC 35..
KE 16..
KE 25..
KE 35..
PKC 50..
PKE 16..
PKE 25..
ANE 12-M..
ANE 17-M..
ANE 20-M..
ANE 29-M..
ANE 35-M..
16
25
25 ÷ 35
35
50
70
95
120
150
16
25
35
50
MN 2 RF-50
MN 3 RF-50
MN 5 RF-50
MN 7 RF-50
MN 2 RF-C
MN 3 RF-C
MN 5 RF-C
MN 7 RF-C
MN 12 F-C
MN 17 F-C
MN 20 F-C
MN 29 F-C
MN 35 F-C
MN 2-C
PN 7-C
PN 14-C
PN 24-C
PN 37-C
MN 3-C
MN 5-C
MN 7-C
MN 9-C
MN 12-C
MN 17-C
MN 20-C
MN 29-C
MN 35-C
Adaptor
AU 230-130 D
with die set MN..-C
and indentor PN..-C
or
with die set MN..-RF-C
and die set MN..F-C
= Hexagonal crimp = Indent crimp = Radial crimp = circular crimp = Trapezium crimp
MTT 16-50
MTT 25-50
MTT 35-50
MTT 50-50
HT 45 - E HT 51 RH 50B 50
HT 120 and tools and heads with 130 kN crimping force
ECW-H3DCONDUCTOR
HYDRAUL IC TOOLS
ANE..-M..
ANE..-P..
ANE..-U..
PK ...
86
TA
P-O
F O
N C
OP
PE
R C
ON
DU
CT
OR
Conductor Size sqmmCONNECTOR CONNECTOR DIE SET DIE SET DIE SET DIE SET DIE SET DIE SET
Run Tap
CONDUCTORAPPLICATION
HYDRAUL IC TOOLS
CONNECTORHT 45-E
HT 51RH 50B 50
HT 81-URHU 81
HT 120 and tools and heads with130 kN crimping force
ECW-H3D RHU 520
6 ÷ 2,5 6 ÷ 1,5 C 6 - C 6 ST MC 6
MC 10
MC 25
MC 35
MC 6-50
MC 10-50
MC 25-50
MC 35-50
*MC 70-50
MC 6.25-U
MC 10-U MC 10-C
Adaptor
AU 230-130 D
with die set MC..-C
Adaptor
AU 520-130 C
with die set MC..-C
MC 6.25-UMC 25-U MC 25-C
MC 35-U MC 35-C
MC 70-80U MC 70-C MC 70-3D
MC 95-80U MC 95-C MC 95-3D
MC 185-C MC 185-3D
MC 240-3D
C 10 - C 10 ST
C 16 - C 16 ST
C 25 - C 10 ST
C 25 - C 25 ST
C 35 - C 16 ST
C 35 - C 35 ST
C 70 - C 25N ST
C 50 - C 25 ST
C 50 - C 50 ST
C 70 - C 35 ST
C 70 - C 70 ST
C 95 - C 35 ST
C 95 - C 70 ST
C 95 - C 95 ST
C 120 - C 120 ST
C 150 - C 120 ST
C 150 - C 150 ST
C 185 - C 95 ST
C 185 - C 185 ST
C 6 - C 6
C 10 - C 10
C 16 - C 16
C 25 - C 10
C 25 - C 25
C 35 - C 16
C 35 - C 35
C 70 - C 25N
C 50 - C 25
C 50 - C 50
C 70 - C 35
C 70 - C 70
C 95 - C 35
C 95 - C 70
C 95 - C 95
C 120 - C 120
C 150 - C 120
C 150 - C 150
C 185 - C 95
C 185 - C 185
10 ÷ 1,5
16 ÷ 1,5
10 ÷ 1,5
25 ÷ 16
16 ÷ 1,5
40 ÷ 25
25 ÷ 10
25 ÷ 1,5
25 ÷ 4
50 ÷ 35
40 ÷ 4
70 ÷ 35
40 ÷ 4
70 ÷ 40
100 ÷ 63
125 ÷ 25
125 ÷ 25
150 ÷ 63
100 ÷ 16
185 ÷ 120
10
16
25 ÷ 16
25
40 ÷ 35
40 ÷ 35
50
70 ÷ 63
50
*50
*70 ÷ 50
*70 ÷ 50
100 ÷ 95
100 ÷ 95
100 ÷ 95
125 ÷ 110
160 ÷ 150
150
185
185 ÷ 120C 240 - C 120 ST C 240 - C 120120 ÷ 95240 ÷ 150
D I E S E L E C T O R C H A R T
* When using die set type MC70-50, the conductors marked with a star must be annealed.= Hexagonal crimp = Oval crimp
C..-C..ST
C..-C..
= circular crimp
MMT 25-U
MMT 50-U
MMT 95-U
MMT 200-U
MMT 25-C
MMT 50-C
MMT 95-C
MMT 200-C
MMT 315-C
ME 80-C ME 80 - 3D
ME 100 - 3D
MT 25 - TD
MT 40 S - TD
MT 50 R - TD
MT 50 S - TD
MT 70 S - TD
MT 95 R - TD
MT 95 S - TD
MT 150 R - TD
MT 150 S - TD
MT 200 R - TD
MT 240 R - TD
MT 315 R - TD
MT 315 S - TD
MT 400 - TD
MT 500 - TD
MT 630 - TD
MT 25 - GC
MT 40 S - GC
MT 50 R - GC
MT 50 S - GC
MT 70 S - GC
MT 95 R - GC
MT 95 S - GC
MT 150 R - GC
MT 150 S - GC
MT 200 R - GC
MT 240 R - GC
MT 315 R - GC
MT 315 S - GC
CA 25 - M..
CA 40 S - M..
CA 50 R - M..
CA 50 S - M..
CA 70 S - M..
CA 95 R - M..
CA 95 S - M..
CA 150 R - M..
CA 150 S - M..
CA 200 R - M..
CA 240 R - M..
CA 315 R - M..
CA 315 S - M..
2A 80 - M..
2A 100 - M..
2A 120 - M..
2A 80 - 2M..
2A 100 - 2M..
2A 120 - 2M..
CA 25 - 2M..
CA 40 S - 2M..
CA 50 R - 2M..
CA 50 S - 2M..
CA 70 S - 2M..
CA 95 R - 2M..
CA 95 S - 2M..
CA 150 R - 2M..
CA 150 S - 2M..
CA 200 R - 2M..
CA 240 R - 2M..
CA 315 R - 2M..
CA 315 S - 2M..
MT 25 - C..
MT 40 S - C..
MT 50 R - C..
MT 50 S - C..
MT 70 S - C..
MT 95 R - C..
MT 95 S - C..
MT 150 R - C..
MT 150 S - C..
MT 200 R - C..
MT 240 R - C..
MT 315 R - C..
MT 315 S - C..
25 R
35 RC/S ÷ 40 S
50 RC
50 S
63 S ÷ 70 S
80 S ÷ 95 RC
95 S ÷ 100 S
120 RC/S ÷ 150 RC
150 S ÷ 160 RC
160 S ÷ 200 RC
200 S ÷ 240 RC
240 S ÷ 315 RC
315 S
400 R
500 R
600 R ÷ 630 R
H.V
. C
OP
PE
R C
ON
DU
CT
OR
S
Conductor Size sqmm SPLICE TERMINALS DIE SET DIE SET DIE SET DIE SET
Adaptor
AU 230-130 D
with die set MMT..-C
Adaptor
AU 520-130 C
with die set MMT..-C
ME 120 - 3D
MK 34 - 520
MK 38 - 520
MK 42 - 520
MT..-TDMT..-GC
CA..-M..CA..-2M..
MT..-C..
MMT 25-50
MMT 50-50
MMT 95-50
MMT 200-50
DIE SET
AC 130-P
AU 130-150
AU 130-240
PS 130-35
PS 130-95
PS 130-150
PS 130-240
MV 35
MV 95
MV 150
MV 240
MUA 300-34
AL
UM
INIU
M C
AB
LE
S
Conductor Size sqmm LUGS DIE SUPPORT DIE HOLDER DIE INDENTOR
Conductor Size sqmm LUGS DIE SUPPORT DIE HOLDER DIE INDENTOR
CONDUCTORAPPLICATIONS
HYDRAUL IC TOOLS
CONNECTORSHT 131-UC RHU 131-C B 131-UC
16 CAA 16 - M..
CAA 25 - M..
CAA 35 - M..
CAA 70 - M..
CAA 95 - M..
CAA 120 - M..
CAA 150 - M..
CAA 185 - M..
CAA 240 - M..
MTA 35 - C
MTA 25 - C
MTA 16 - C
MTA 70 - C..
MTA 95 - C..
MTA 120 - C..
MTA 150 - C..
MTA 185 - C..
MTA 240 - C..
AA 50 - M..
AA 35 - M..
AA 25 - M..
AA 16 - M..
AA 70 - M..
AA 95 - M..
AA 120 - M..
AA 150 - M..
AA 185 - M..
AA 240 - M..
25
35
70
CAA 50 - M.. MTA 50 - C50
95
120
150
185
240
CAA 300 - 34 - M..300
50
35
25
16
70
95
120
150
185
240
AA 300 - 34 - M..300
Indent crimp
AC 130-P
AU 130-150
AU 130-240
PS 130-35
PS 130-95
PS 130-240
MUA 35
MUA 95
MUA 240
MUA 300-34
MUA 35
MUA 95
MUA 150
MUA 240
PS 130-150MUA 150
CAA..-M..
MTA..-C
AA..-M..
87
D I E S E L E C T O R C H A R T F O R D E E P S T E P P E D I N D E N T I N G W I T H C O N T A I N I N G D I E S
Conductor Size sqmm SPLICESDIE SUPPORT
HYDRAUL IC TOOLS HT 131-UC RHU 131-C B 131-UC
DIE HOLDER DIE INDENTOR
AL
UM
INIU
M C
AB
LE
SConductor Size sqmm
Al Al/Cu
PRE-ROUNDERS SELECTION DIES DESCRIPTION DIES SEQUENCE
16 MTMA 16-GC
MTMA 25-GC
MTMA 35-GC
MTMA 50-GC MTMA 50-25 GC
MTMA 50-35 GC
MTMA 70-35 GC
MTMA 70-50 GC
MTMA 95-50 GC
MTMA 95-70 GC
MTMA 120-70 GC
MTMA 120-95 GC
MTMA 150-70 GC
MTMA 150-95 GC
MTMA 150-120 GC
MTMA 185-120 GC
MTMA 185-150 GC
MTMA 240-150 GC
MTMA 240-185 GC
MTMA 70-GC
MTMA 95-GC
MTMA 120-GC
MTMA 150-GC
MTMA 185-GC
MTMA 240-GC
25
35
50 50
50
70
70
95
95
120
120
150
150
150
185
185
240
240
25
35
35
50
50
70
70
95
70
95
120
120
150
150
185
70
95
120
150
185
240
MTMAD 300-185 GC
MTMAD 300-240 GC
MTMAD 300-GC
MTMA 16/1
MTMA 25/1
MTMA 35/1
MTMA 50/1
MTMA 70/1
MTMA 95/1
MTMA 120/1
MTMA 150/1
MTMA 185/1
MTMA 240/1
MTMAD 300/1 300
300
185
240
300
AC 130-P
AU 130-150
AU 130-240
MVM 35
MVM 95
MVM 150
MVM 240
MUA 35
MUA 95
MUA 150
MUA 240
PS 130-35/E
PS 130-95/E
PS 130-150/E
PS 130-240/E
50
70
95
120
150
185
240
UP 130-50
ALUMINIUM CONDUCTOR SIZE sqmm PRE-ROUNDER CRIMPINGCONDUCTOR ROUNDING
UP 130-70
UP 130-95
UP 130-120
UP 130-150
UP 130-185
UP 130-240
1) AU 130-.. DIE-HOLDERUsed to house dies and pre-rounding.
2) UP 130-.. PRE-ROUNDERSUsed to round aluminium sectoral conductors in order to introduce them into circular connectors. Each pre-rounder is made of twoparts: the upper part is housed in die-holder AU 130-.. and the lower part is locked onto AC 130-P.. die support.
3) AC 130-P.. DIE SUPPORTHouses lower part of pre-rounder UP 130-.. or indentor PS 130-..
4) MUA... DIESContaining dies.
5) PS 130-../E INDENTORSSuch indentors are specifically engineered for deep indentation of aluminium conductors of any stranding configuration.
1 1
4
5
2
3Indent crimp
MTMA..MTMA..-..GC
SPLICES
MUA 300-34
88
D I E S E L E C T O R C H A R T F O R D E E P S T E P P E D I N D E N T I N G W I T H C O N T A I N I N G D I E S
25
35 UP 130-35
UP 130-25
ASKFOR
THE CATALO
GU
ES•
Also available in the Cembre product range
“Industrial Marking Systems”
“Cable glands and accessories”
RRRRIIIINNNNGGGGcablesys
MANUAL CABLE MARKINGSYSTEMS
SSSSIIIIGGGGNNNNstick-onsys
WARNING, PROHIBITION AND MANDATORY SIGNS
PC-DRIVEN INK PLOTTERMARKER PRINTING SYSTEM
PC-DRIVEN THERMAL TRANSFER MARKER PRINTING SYSTEM
ASKFOR
THE CATALO
GU
ES•
NICKEL PLATED BRASS CABLE GLANDS WITH PROTECTION IP 68POLYAMIDE CABLE GLANDS WITH PROTECTION IP 68
The information contained in this catalogue is toaid the commercial selection of products.
It is not intended for use as an instruction manual.Information concerning application and the correctoperational use is provided by the specific manual
delivered with the products.
printing: Euroteam Brescia.
This catalogue is the property of Cembre.Any reproduction (in full or in part) is forbidden withoutthe prior written permission of Cembre.
Cembre reserve the right to modify the specificationsin this catalogue without prior notice.
Any other country, please contact Cembre S.p.A. - Italy
Cembre S.p.A.Via Serenissima, 9 - 25135 Brescia (Italia)Telefono: 030 36921Telefax: 030 3365766Casella Postale 392 - 25100 Brescia (Italia)E-mail: [email protected]
Cembre S.a.r.l.22 Avenue Ferdinand de Lesseps91420 Morangis (France)Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10B.P. 37 - 91421 Morangis CédexE-mail: [email protected]
Cembre Ltd.Dunton ParkKingsbury Road, Curdworth - Sutton ColdfieldWest Midlands B76 9EE (Great Britain)Tel.: 01675 470440 - Fax: 01675 470220E-mail: [email protected]
Cembre España S.L.Calle Llanos de Jerez, 2 - P.I. de Coslada28820 Coslada - Madrid (España)Teléfono: 91 4852580Telefax: 91 4852581E-mail: [email protected]
Cembre ASFossnes SenterN-3160 Stokke (Norway)Phone: (47) 33361765Telefax: (47) 33361766E-mail: [email protected]
Cembre GmbHTaunusstraße 2380807 München (Deutschland)Telefon: 089/3580676Telefax: 089/35806777E-mail: [email protected]
Cembre Inc.Raritan Center Business Park70 Campus Plaza IIEdison, New Jersey 08837 (USA)Tel.: (732) 225-7415 - Fax: (732) 225-7414E-mail: [email protected]
www.cembre.com