Bachelor of Engineering (BENG)fkm.ump.edu.my/images/CV2015/Thamir_Khalil_Ibrahim_Dr.pdf · Thamir Khalil Ibrahim 15. Thamir k. ibrahim "Investigating the matrix geometry shape effects

Thamir Khalil Ibrahim

Dr. THAMIR KHALIL IBRAHIM Sr.Lecturer Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, MALAYSIA. Tel: 609-424 6366, Fax: 609-424 6222 Email: [email protected] Google Scholar: https://scholar.google.com/citations?user=WPbB1dgAAAAJ&hl=en

Academic Qualification

Degree Bachelor of Engineering (BENG) Field of study: Mechanical (General Mechanical Engineering) Institution: University of Tikrit

Country: Iraq Year obtained: 1998 Graduation Project: Design a Wind Electric Station for Tikrit City Degree Master in Engineering Sciences Field of study: Mechanical/Thermo-fluids Institution: University of Tikrit Country: Iraq Year Obtained: 2001 Dissertation Title: A Study Of Combustion Process In The Boiler Furnace For Baji Thermal Power Station

Degree: PhD in Engineering Field of Study: Mechanical Engineering/Power Plant and Alternative Energies Institution: University Malaysia Pahang Country: Malaysia Year obtained: 2012

Thesis Title: Modeling And Performance Enhancements Of A Gas

Turbine Combined Cycle Power Plant


Brief Profile

GENERAL INFORMATIOIN Surname : Ibrahim First name(s): Thamir Khalil Citizenship : Iraqi Female/Male: Male Date of birth : 05 June 1976 Marital state: Married Present Employment: Senior Lecturer, Faculty of Mechanical Engineering, University Malaysia Pahang

Permanent Address:

183, Lorong Peramu Permai 14, 26600, Pekan, Pahang

Mobile Number: 0060142974005

00601137535006 E-mail address: [email protected]

[email protected]

Working Experiences / Appointment

• 2000−2002 Εngineer, Baiji Gas Turbine Power Plant.

• 2002-2014 Senior Lecturer Faculty of Mechanical Engineering in University of Tikrit.

•2002−2004 Supervising engineer on the work of the inauguration of dairy plant at the University of Tikrit. • 2003-2005 Examiner bodies for Faculty of Mechanical Engineering in University of Tikrit (member). • 2005-2007 Director of Eng. Library (Head of library). • 2006-2009 Computer system updating (manager).


•2013−2014 Director for Postgraduates student in Mechanical Engineering Department. • 2013-2014 Examiner bodies for Faculty of Mechanical Engineering in University of Tikrit (member). • 2014 Director for Postgraduates student in Colloge of engineering- Tikrit University •2014 Faculty of Mechanical Engineering, Universiti Malaysia PAHANG.

Expert Area

1- Power plant 2- Alternative Energies 3- Heat transfer 4- Energy system 5- Internal combustion engine

Research Interest

1- Power plant 2- Alternative Energies 3- Heat transfer 4- Energy system 5- Internal combustion engine 6- Optimization

Research Project / Grant

Professional Qualification / Membership / Affiliation / Experience

EDITORIAL BOARD MEMBERS • Tikrit Journal of Engineering Science (TJES)

MEMBERSHIP IN ASSOCIATION, SOCIETIES

1- Member in Iraqi Engineering Union since 1999.


2- Member in Association of Tikrit University Lecturers, Iraq, 2002. 3- Member in the Institute of Mechanical Engineers (IMechE) student chapter, 2015

Teaching Experience

ACADEMIC

I was appointed in mechanical engineering department/ University of Tikrit in 10th June 2002. I have taught the following courses at undergraduate level: •Mathematics (Calculus I and II)

•Engineering drawing

•Descriptive geometry

•AutoCAD

•Thermodynamics

•Power Plant

•Heat Transfer

•Internal Combustion Engines. During my PhD study course, I have worked as lecturer in laboratories of Thermodynamic, Heat Transfer, and Fluid Mechanics at University Malaysia Pahang, Malaysia. In 2014 I start my new work with Faculty of Mechanical Engineering, University Malaysia Pahang; I work as Senior Lecturer I have taught the following courses at:

1- ENGINEERING MECHANICS LAB 1 (BMM1511). 2- MEASUREMENT & INSTRUMENTATION (BMM3532). 3- MECHANICAL LABORATORY 1 (BMM1811). 4- THERMODYNAMICS 1 (BMM2513). 5- THERMODYNAMICS (BMM2673). 6- HYDRAULICS & PNEUMATICS TECHNOLOGY (DMM3623) for

Diploma. 7- ADVANCED FLUID MECHANICS (MKM1123S) for Master Degree.


Post Graduate Supervision

Degree / Final Year Supervision Supervisor on 19 Degree student they work on 10 final year project.

List of Publications

PUBLICATIONS IN PEER-REVIEWED OR REFEREED JOURNALS

1. Thamir K. Ibrahim and M. M. Rahman. Effective Parameters on

Performance of Multipressure Combined Cycle Power Plants. Advances in Mechanical Engineering Volume 2014 (2014), Article ID 781503, 14 pages (ISI: IF= 1.06: Q2).

2. Thamir K. Ibrahim and M.M. Rahman, Effect of the Compression Ratio on the performance of different strategies of the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), Vol. 9 (2014): 1747-1757.

3. Ahmed Tawfeeq Ahmed Al-Sammarraie, Raaid Rashad Jassem, Thamir

K. Ibrahim. Mixed Convection Heat Transfer in Inclined Tubes with Constant Heat Flux. European Journal of Scientific Research, Vol. 97 No 1 February, 2013, pp.144-158.

4. Thamir K. IBRAHIM, and Mustafizur M. RAHMAN, STUDY ON EFFECTIVE PARAMETER OF THE TRIPLE-PRESSURE REHEAT COMBINED CYCLE PERFORMANCE. THERMAL SCIENCE: Year 2013, Vol. 17, No. 2, pp. 497-508.

5. Thamir K. Ibrahim, and M.M. Rahman, EFFECT OF THE

ISENTROPIC EFFICIENCY AND ENHANCING STRATEGIES ON THE PERFORMANCE OF GAS TURBINE. Journal of Mechanical Engineering and Sciences (JMES) e-ISSN: 2231-8380; Volume 4, pp. 383-396, June 2013.


6. Thamir, K. Ibrahim and Rahman, M. M. 2012. Parametric Simulation of Triple-Pressure Reheat Combined Cycle: A Case Study. Advanced Science Letters 13: 263-268. (IF =1.253)

7. Thamir, K. Ibrahim and Rahman, M.M. 2012. Effect of compression

ratio on performance of combined cycle gas turbine. SAP, Journal of Energy Engineering, 2(1): 9-14.

8. Thamir, K. Ibrahim, Rahman, M.M., Abdalla, A.N., (2011). Optimum

Gas Turbine Configuration for Improving the Performance of Combined Cycle Power Plant. International Journal Procedia Engineering, 15: 4216-4223. (Scopus indexed)

9. Rahman, M.M., Thamir, K. Ibrahim, Abdalla, A.N. 2011.

Thermodynamic performance analysis of gas-turbine power-plant. Int. J. Phys. Sci., 6(14): 3539-3550. (IF = 0.54)

10. Thamir, K. Ibrahim, Rahman, M.M., Abdalla, A.N. 2011.

Improvement of gas turbine performance based on inlet air cooling systems: A technical review. Int. J. Phys. Sci., 6(4): 620-627. (IF = 0.54)

11. Rahman, M.M., Thamir, K. Ibrahim. Kadirgama, K., Mamat, R.,

Bakar, R.A. 2011. Influence of operation conditions and ambient temperature on performance of gas turbine power plant. Adv. Mater. Res., 189-193: 3007-3013. (Scopus Indexed)

12. Thamir, K. Ibrahim, Rahman, M.M., Abdalla, A.N. 2010. Study on the

effective parameter of gas turbine model with intercooled compression process. Sci. Res. Essays, 5(23): 3760-3770. (IF = 0.448)

13. Rahman, M. M., Thamir, K. Ibrahim, Taib, M. Y., Noor, M. M.,

Kadirgama, K. and Rosli, A. Bakar. 2010. Thermal analysis of open-cycle regenerator gas-turbine power-plants. World Academy of Science, Engineering and Technology Journal, 68: 94-99. (Scopus indexed)

14. Thamir, K. Ibrahim and Rahman, M. M. 2012. Thermal impact of

operation condition on performance of a combined cycle gas turbine. Journal of Applied Research Technology. 10(4): 567-577. (IF =0.35).


15. Thamir k. ibrahim "Investigating the matrix geometry shape effects on the performance of the rotary heat exchanger in the dorah power plant" Tikrit Journal of Engineering Sciences, Vol. 16, No.2, 2009

16. Raid R. Jassem, Thamer k. Ibrahim, Ibrahim T. Nazzal and Hashem S. Hamood "The effect of skulduggery in fuel of diesel engines on environmental pollution " Tikrit Journal of Engineering Sciences, Vol. 15, No.3, pp. 63-78, 2008.

17. Aziz M. Mhamuad, Thamir K. Ibrahim and Raid R. Jasim "Determination of the temperature distribution the perforated fins under natural convection" Tikrit Journal of Engineering Sciences, Vol. 15, No.2, pp. 62-77, 2008.

PUBLICATIONS IN INTERNATIONAL AND NATIONAL CONFERENCE

1. Thamir K. Ibrahim and M.M. Rahman, Effect of the Compression Ratio on the performance of different strategies of the Gas Turbine. 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 at Kuantan, Pahang, Malaysia. Paper ID: p300.

2. Thamir, K. Ibrahim, Rahman, M.M., Abdalla, A.N., (2011). Optimum Gas Turbine Configuration for Improving the Performance of Combined Cycle Power Plant. International Conference on Advanced in Control Engineering and Information Science, CEIS 2011, Dali, China, August 18-19, 2011.

3. Thamir, K. Ibrahim, Rahman, M. M., Taib, M. Y., Noor, M. M., and Kadirgama, K., 2010. Thermal analysis of open-cycle regenerator gas-turbine power-plants. National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCME, 26-27 MAY 2010, FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia; pp. 111-124.

4. Thamir K. Ibrahim and M. M. Rahman " Effects of operation

conditions on performance of a gas turbine power plant" 2nd National Conference on Mechanical Engineering For Research & Postgraduate Students 2010, UMP, Pahang, Malaysia. pp. 135-144.


5. Thamir, K. Ibrahim, Rahman, M.M., Sharma, K.V. 2011. Influence of

operation conditions on performance of combined cycle gas turbine. 3rd International Conference on Mechanical and Electrical Technical (ICMET2011) Dalian, China, August 26-27, 2011.

6. Rahman, M.M., Thamir, K. Ibrahim, Kadirgama, K., Bakar R.A.,

2011. Performance of Combined Cycle Gas Turbine with Variation of Cycle Peak Temperature Ratio. Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 13-15 November 2011), Batu Pahat, Johor, Malaysia, pp. 601-606.

7. Thamir, K. Ibrahim and Rahman, M. M. 2011. Parametric Study of a

Two-shafts Gas Turbine Cycle Model of Power Plant. 1st International Conference on Mechanical Engineering Research - ICMER2011, pp 203-215.

8. M. M. Rahman, Thamir K. Ibrahim, M. Y. Taib, M. M. Noor, K. Kadirgama and Rosli A. Bakar "Thermal analysis of open-cycle regenerator gas-turbine power-plants" International Conference on Mechanical, Aeronautical and Manufacturing Engineering (ICMAME), France during July 28-30, 2010.

List of Books

List of Consultancy

A- REVIEWER IN PEER REVIEWED JOURNALS 1-Energy Conversion and Management (Elsevier) IF=2.775. 2- Universal Journal of Biotechnology & Bioinformatics (UJBB) Universal Journal. 3- JOURNAL OF APPLIED RESEARCH AND TECHNOLOGY National Autonomous University of Mexico (IF= 0.35).


4- Journal of Chemical Engineering and Materials Science (JCEMS) academic journals.

5- Indian Journal of Engineering & Materials Sciences (IF=0.362) National Institute of Science Communication and Information Resources. 6. Journal of Petroleum and Gas Exploration Research (JPGER) /International Research Journals. 7-Scientific Research and Essays (IF=0.448 2011) /academic journals. 8-AFRICAN JOURNAL OF AGRICULTURAL RESEARCH /academic journals. 9-HERALD JOURNAL OF PURE AND APPLIED PHYSICS /HERALD International Research Journals. 10- International Journal of Physical Sciences /academic journals (IF= 0.54/ 2011). 11- International Research Journal of Computer Science and Information Systems/ International Research Journals.

12-Journal of Renewable and Sustainable Energy (IF=1.51) /AIP Publishing. 13-African Journal of Environmental Science and Technology / academic journals 14- Energy Journal (IF=3.651)/ Elsevier. 15- Journal of Research in Environmental Science and Toxicology / International Research Journals. 16- Applied Soft Computing (IF=2.14) /Elsevier. 17- International Journal of Thermal Sciences (IF=2.47) /Elsevier. 18- International Journal of Exergy (Scopus (Elsevier))


B- PANEL FOR MASTER STUDENT, TIKRIT UNIVERSITY, IRAQ, 2014.

List of Research / Project

Awards / Research / Achievements

# Institution Awarded Date

Obtained Reasons for Awarding

1 Dean of the Faculty of Engineering

2004 The outstanding efforts in developing the Tikrit University





4 Chancellor of Tikrit University

2006 Application instructions carefully


2007 Updating the computer system


2008 Updating the computer system


2008 Getting "Very Good" in the Staff Annual Assessment


2009 Getting "Excellent" in the Staff Annual Assessment

9 FKM, UMP 2010 Best poster paper in the first national conference in FKM, UMP.

10 Minister of Higher Education
















2014 Getting best H-index in Tikrit University


2014 Getting Tikrit Journal of Engineering Science the second best journal in Iraq



Patents

List of Course / Conference Attended

Date Program Status

09 Nov 2009 Methodology Courses, UMP Gambang. Participant

09 Dec 2009 Special talk from prof. Du tong yun on removal arsenic and other toxic, ion from industrial waste water, UMP Gambang, Pahang, Malaysia.

Participant

15~17 Dec 2009

UMP Postgraduate Research Colloquium, Pahang, Malaysia Participant

26 May 2010 National Conference on Mechanical Engineering For Research & Postgraduate Students 2010, UMP, Pahang, Malaysia

Participant

3-4Dec. 2010 2nd National Conference on Mechanical Engineering For Research & Postgraduate Students 2010, UMP, Pahang, Malaysia

presenter

18-19 Aug. 2011

International Conference on Advanced in Control Engineering and Information Science, 18-19August, 2011, Dali, China

presenter

26-27 Aug. 2011

3rd International Conference on Mechanical and Electrical Technology, 26-27 August 2011, Dalian, China presenter

13-15 Nov. 2011

International Conference on Engineering & Technology (MUiCET 13-15 November 2011), Batu Pahat, Johor, Malaysia

presenter

5-8 Dec 2011 1st International Conference on Mechanical Engineering Research – ICMER 2011 presenter

1-3 July 2013 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 at Kuantan, Pahang, Malaysia.

presenter

10 Dec. 2014 Eco Challenges and Opportunities for Modern Society Participant


(Mr. Matthias Gelber), FKM Postgraduate Symposium 2014

19 Dec. 2014 1 Day Prepare Final Exam Question according to Bloom Taxonomy (OBE) Workshop (MR YAHYA SAMIAN -UTM), FKM, University Malaysia PAHANG

Participant

29 Dec. 2014 FKM, FKM Postgraduate Symposium 2014 Postgraduate Symposium 2014

Reviewer Panel

16 Feb. 2015 Academic Centre for Competitiveness & Innovation (CAIC) University Malaysia PAHANG (Teaching & Learning Induction Program (P & P))

Participant

26 Feb. 2015 The Institute of Mechanical Engineers (IMechE) student chapter, (Chairman of IMechE Malaysian Chapter (Ir. Mathew Thomas)), FKM, University Malaysia PAHANG

Participant

Documents

Bachelor of Engineering (BENG)fkm.ump.edu.my/images/CV2015/Thamir_Khalil_Ibrahim_Dr.pdf · Thamir Khalil Ibrahim 15. Thamir k. ibrahim "Investigating the matrix geometry shape effects