ARCHITECT’S SUPPLEMENTAL INSTRUCTIONS

NJRA Architects, Inc. 5272 S. College Drive, Suite 104 | Murray, Utah 84123 | 801.364.9259 | www.njraarchitects.com

Page 1 of 1

Item

Number Description

1 As requested by the Owner main entrance door window system A101A & W1 to the dialysis

suite has been revised to match the storefront system at the main building hallway in

appearance and color. Field verify adjacent existing to match. This will be a 45-minute fire

rated glazed Hollow metal door window system as indicated in the attached revised

sheets. As an alternate- also provide price to fabricate this glazed door window system in

45-minute fire rated Aluminum storefront system. See attached revised sheets with revisions

shown clouded for more information.

2 See attached Plumbing ASI #8 from VBFA Engineers prepared in response to RFI #04 to

revise piping at three island sinks. See attached revised plumbing sheets PP100 & PP101 with

revisions shown clouded for more information.

Attachments:

ASI #8 Memo from VBFA Engineers,

Drawings: Revised sheets A113, A252, A601A, PP100 & PP101.

ARCHITECT’S SUPPLEMENTAL INSTRUCTIONS

Date Issued:

May 29, 2020

Project: Intermountain Healthcare

Tooele Valley Dialysis Clinic Expansion

2356 North 400 East, Suite #102

Tooele, Utah 84074

Architect’s Supplemental

Instructions:

ASI #8

To: Saunders Construction

1113 South 500 West

Bountiful, Utah 84010

The Work shall be revised in accordance with the following supplemental instructions, and shall be

carried out in accordance with the Contract Documents. Prior to proceeding with the work described,

the Contractor is to determine if the work is to affect the contract amount. If additional costs are to be

incurred, the Contractor shall submit an itemized cost breakdown showing time, material and other

items affected by the change. After acceptance of this work and associated costs, a change order

will be prepared for signatures to affect a change to the contract.

M E M O R A N D U M

DATE: May 29, 2020

TO: Sourabh Sinha, LEED AP

NJRA Architects, Inc.

FROM: Dallen Romriell, P.E.

PROJECT NO. 19605

PROJECT: Intermountain Healthcare Tooele Dialysis Clinic

RE: ASI-008 – Domestic Piping to Sinks -Ref RFI-004

ASI-008 adds clarification to the contract documents to coordinate domestic water to sinks where wall did not go to ceiling. The ASI relocates the hot water main to run underneath the slab in order to serve sinks that do not have walls going to ceiling.

SHEET - PP100 – BELOW GRADE PLUMBING PLAN 1. 1” DHW main dropped to go below grade to run to sinks in the following locations: Room

A116, Room A122, and Corridor A145. 2. 3/4” DCW branch dropped to go below grade to run to sinks in the following locations:

Room A116, Room A122, and Corridor A145.

SHEET - PP101 – LEVEL PLUMBING PLAN 1. Vent lines can be common vented per code to the sinks in the following locations: Room

A116, Room A122, and Corridor A145. 2. Thermostatic mixing valves for EW-1 need to be relocated from the ceiling to underneath

the cabinetry in the following locations: Room A122, and Corridor A145. 3. Keyed note 21 added.

RE

F.

FD

FD

FDPRIVATE/ISOLATION

A129

TDR

A126

WAITING

A101

PUBLICTOILET

A102 BAY #7

A113

BAY #2

A107

BAY #1

A106

(E)ELEVATOR

(E)ELEVATORMACHINE

ROOM

(E) HSKP

BAY #3

A108

STAFFBREAK/CONFERENCE

ROOM

A134 STORAGE

A132

MANAGEROFFICE

A130

LABALCOVE

A116

SHAREDOFFICE

A104

B

A

1 3

92 SFBAY #5

BAY #10

A118

BAY #6

A112

4

EXAM/HOME

TRAININGROOM

A136

HOMETRAINING

ROOM

A138

CLEANSUPPLY

A131

BAY #8

A114

BAY #4

A110

BAY #9

A117

BAY #11

A119

BAY #12

A120

BAY #13

A121

BAY #14

A122

PATIENTTOILET

A123

HSKP

A127

SOILEDWORKROOM

A128

FUTUREEXAM/HOME

TRAININGROOM

A141

STAFF TOILET

A139BIO MED

A137

ELEC

A135

MED ROOM

A124

MECH

A140

MECH

A133

NOURISHMENT

A105

MECH

A103

LABALCOVE

WHEELCHAIRALCOVE

A125

A401

1

NURSESTATION

EAST

A115

NURSESTATION

WEST

A109

BID ALTERNATE #1

CORRIDOR

A143

CORRIDOR

A142

CORRIDOR

A145

CORRIDOR

A144

CORRIDOR

A146

CORRIDOR

A145

TYP.

08.01

08.08 26.14

11.08

06.21

11.06

26.14

11.08

06.21

11.06

10.18

12.01

12.01

11.06

10.19

06.21

11.1522.04

22.05

12.01

11.0211.08 06.17 11.08

11.05

11.08

12.01

26.14

11.06

08.05

11.16

11.17

12.01

11.03

08.07

11.08

06.2122.05

06.21

11.0212.02TYP.

09.04

09.04

09.04 09.04

06.21

12.02TYP.

26.14

10.0610.06

22.02

22.01

22.04

22.05

06.2109.0809.08TYP.

12.02TYP.

11.02

06.21

22.05

11.02

09.04

09.04

26.06

11.02

09.04TYP.

12.02TYP.

11.02

11.0811.08TYP. TYP.

22.02

26.06

11.14

10.18

11.12

11.13

06.21

26.17

12.0112.01TYP.

10.06

10.06

22.01

26.14

22.02

26.16

08.09

08.03TYP.

11.06

11.18 11.18

01.14

26.14

12.03

09.27

TYP.

12.03

09.27TYP.

12.02

12.02

12.03

09.27TYP.

12.03

09.27TYP.

12.03

09.27TYP.

26.19

10.11

11.07 11.07

11.07

26.04

TYP.

08.03

08.04

06.17

06.17

06.17

06.17

06.17

06.17

TYP.

02.39

08.01

06.01

08.01

06.01

08.01

08.01

08.01

06.01

08.01

06.01

12.01

12.01

08.01

11.08

11.03

06.01

06.01

08.01

02.39

02.39

08.01

06.01

06.17

02.39

06.01

06.01

11.0306.01

12.01

06.01

11.0806.17

06.01

06.01

12.01

08.01

08.01

12.01 11.08

01.0801.16

11.03

12.01

06.01

06.01

11.03

11.08

06.17

11.08

06.0111.03

11.03

06.01

12.01

02.39

02.26

02.2402.24

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

TYP.

12.01

TYP.

06.01

TYP.

TYP.

08.01

22.03

22.01

10.06

08.01

22.02

12.01

08.10

08.01

11.02

11.0211.02

11.02

5

SELVAM

RAJAVELU

267857-0301


NJRA Project #

5272 S. College Drive, Suite104Murray, Utah 84123

801.364.9259www.njraarchitects.com

5/2

8/2

020 1

2:4

5:2

5 P

M

A113

Floor PlanLevel 1

Inte

rmo

un

tain

He

alth

ca

re

No

rth

po

inte

Me

dic

al P

ark

, B

ldg

B

2356 N

ort

h 4

00 E

ast

, Su

ite

#102

Too

ele

, U

tah

84074

19230.00

Construction Documents Feb 4, 2020

Too

ele

Va

lley D

ialy

sis

Clin

ic E

xp

an

sio

n

KEYED NOTES

01.08 CLEAN GOWN STORAGE.

01.14 DASHED LINE INDICATES AREA OF FUTURE TRAINING ROOM A141 TO BE BIDUNDER BID ALTERNATE #1. THE ROOM SHALL HAVE WALLS AND DOOR IN BASEBID ALONG WITH PLUMBING PIPING, HVAC ITEMS NOTED IN CONSTRUCTIONDOCUMENTS. NEW FINISHES, CEILING, MILLWORK, LIGHTING, PLUMBING

FIXTURE ETC TO BE BID UNDER ALTERNATE #1.

01.16 SOILED GOWN STORAGE.

02.24 UPGRADE EXISTING WALL TO TYPE-Q BY REPLACING GYPSUM BOARD TOTYPE-X GYPSUM AND EXTENDING WALL TO DECK ABOVE FOR A ONE-HR FIRERATING.

02.26 EXISTING FIRE RATED DOOR AND HARDWARE TO REMAIN. PROTECT DURINGCONSTRUCTION.

02.39 EXISTING DOOR AND HARDWARE TO REMAIN. PROTECT DURINGCONSTRUCTION.

06.01 NEW CASEWORK. SEE INTERIOR ELEVATIONS AND FINISH PLANS.

06.17 PLUMBING CHASE WALL. SEE INTERIOR ELEVATIONS AND DETAILS ON SHEETA505C. ALSO SEE ELECTRICAL AND PLUMBING DRAWINGS.

06.21 SOLID SURFACE INTEGRAL SINK. BASIS OF DESIGN: SAMSUNG, STARON A1181SINK, COLOR "BRIGHT WHITE" BW010. ALSO SEE PLUMBING DRAWINGS.

08.01 NEW DOOR. SEE DOOR SCHEDULE FOR MORE INFORMATION. WOOD DOORAT THE BUILDING HALLWAY SHALL MATCH COLOR AND FINISH OF THEADJACENT EXISTING WOOD DOORS IN THE HALLWAY. WOOD DOORS INSIDETHE REMODEL SUITE SHALL BE CLEAR MAPLE FINISH.

08.03 CARD ACCESS, TYPICAL. SEE ELECTRICAL DRAWINGS.

08.04 CARD ACCESS AND AUTOMATED DOOR OPENER. SEE ELECTRICALDRAWINGS.

08.05 PUSH PAD FOR AUTO DOOR ACTIVATION. SEE ELECTRICAL DRAWINGS.

08.07 OVERHEAD CONCEALED FULL BREAKOUT TRACKLESS UL 1784 SMOKE RATEDNARROW STILE SINGLE SLIDE ALUMINUM AND GLASS DOOR. BASIS OF DESIGN:ASSA ABLOY VERSAMAX ICU DOOR SYSTEM. GLAZING TO BE 1/4" CLEARTEMPERED. SEE DETAIL 8/A601A & 10/A601A.

08.08 EXISTING EXTERIOR WINDOWS TO REMAIN. PROTECT DURING CONSTRUCTION.

08.09 ALUMINUM AND GLASS MANUAL SLIDING WINDOW. BASIS OF DESIGN C. R.LAURENCE DW 4200 A TWO PANEL MANUAL DELUXE LOCKABLE SLIDINGWINDOW. FINISH: SATIN ANODIZED. SEE SHEET A601A.

08.10 INTERIOR WINDOW . SEE SCHEDULE. HM WINDOW FRAME AND GLAZING TOBE 1-HR FIRE RATED.

09.04 PARTIAL HEIGHT WALL WITH SOLID SURFACE CAP. SEE WALL TYPE 'P' ON SHEETA501.

09.08 3/4" THICK FIRE TREATED PLYWOOD FROM TOP OF BASE TO 7'-0" ABOVE BASE-ALL WALLS, TYPICAL, PAINT PLYWOOD TO MATCH WALL COLOR

09.27 PROVIDE SOLID SURFACE WINDOW SILL AT ALL EXTERIOR WINDOWS TYPICAL.SEE FINISH SCHEDULE AND DETAIL 5/A602A.

10.06 GRAB BARS. SEE SPECIFICATIONS. PROVIDE 'TYPE 1' METAL STUD BACKING PERDETAIL 5/A502A. SEE SHEET G003 FOR MOUNTING HEIGHTS.

10.11 METAL LOCKERS, 15" W X 18" D X 2 TIER. TOTAL 10 LOCKERS. SEESPECIFICATIONS. SEE DETAIL 6/A506A FOR LOCKER BASE DETAIL.

10.18 COFFEE POT, OFCI. SEE ELECTRICAL DRAWINGS.

10.19 REFRIGERATOR, OFCI. SEE ELECTRICAL DRAWINGS.

11.02 NURSE CHARTING STATION. SEE DETAIL 1/A504A. ALSO SEE DETAIL 13/A502AFOR BACKING REQUIREMENTS. SEE ELECTRICAL DRAWINGS FOR POWER ANDDATA.

11.03 PATIENT CHAIR/ RECLINER, OFOI.

11.05 METAL SHELVING, OFOI.

11.06 WALL MOUNTED MONITOR OFCI. SEE ELECTRICAL DRAWINGS. PROVIDE 3'-0"W X 2'-0" H X 18 GA SHEET METAL BACKING.

11.07 DIALYSIS HOSE AND SUPPLY BOX. SEE PLUMBING DRAWINGS. VERIFYLOCATION AND HEIGHT WITH OWNER BEFORE INSTALLATION.

11.08 TABLO HEMODIALYSIS SYSTEM. PROVIDED AND INSTALLED BY OWNERSVENDOR.

11.12 VENDING MACHINE, OFOI. SEE ELECTRICAL DRAWINGS

11.13 ICE AND WATER DISPENSER ON STAND, OFCI. SEE PLUMBING DRAWINGS.

11.14 FLUSH MOUNTED IN- FLOOR SCALE, OFCI. CONCRETE FLOOR TO HAVE A 3"RECESS FOR IN-FLOOR SCALE. RECESS TO BE 3'-0" W X 3'-4" D. PROVIDE 10"MINIMUM CLEARANCE FROM BACK WALL AND 6" MINIM CLEARANCE FROMSIDE WALL AS SHOWN. ALSO PROVIDE 3" RECESS FOR CONDUIT CENTERED ON

THE RECESSED SLAB/IN-FLOOR SCALE FROM THE FLOOR SCALE TO WALLBEHIND. COORDINATE WITH IN-FLOOR SCALE MANUFACTURER. SEE DETAIL2/A504A. POUR NEW THICKENED SLAB AFTER REMOVAL OF CONCRETE.

11.15 HIGH DENSITY WIRE SHELVING, OFOI

11.16 FLOOR MOUNTED BLANKET WARMER, OFCI. SEE ELECTRICAL DRAWINGS FORPOWER REQUIREMENTS.

11.17 LINEN CART, OFOI.

11.18 EXAM TABLE, OFOI. SEE ELECTRICAL DRAWINGS FOR POWER REQUIREMENTS.

12.01 FURNITURE, TO BE PROVIDED AND INSTALLED BY OWNERS VENDOR (MIDWESTCOMMERCIAL INTERIORS - MWCI)

12.02 PRIVACY CURTAIN AND TRACK. SEE FINISH SCHEDULE AND PROJECT MANUAL. SEE DETAIL 13/A503A

12.03 PROVIDE AND INSTALL 1" ALUMINUM BLINDS AT ALL EXTERIOR WINDOWS,TYPICAL THROUGHOUT THE PROJECT. FIELD VERIFY WINDOW SIZE BEFOREINSTALLATION.

22.01 FLOOR MOUNTED WATER CLOSET. SEE PLUMBING DRAWINGS.

22.02 WALL MOUNTED HAND WASH SINK. SEE PLUMBING DRAWINGS.

22.03 MOP SINK. SEE PLUMBING DRAWINGS.

22.04 COUNTER MOUNTED STAINLESS STEEL DEEP SINK. SEE PLUMBING DRAWINGS.

22.05 COUNTER MOUNTED EYE WASH. SEE PLUMBING DRAWINGS.

26.04 WALL MOUNTED PLUG STRIP. SEE ELECTRICAL DRAWINGS.

26.06 DOOR RELEASE BUTTON. SEE ELECTRICAL DRAWINGS.

26.14 NURSE CALL WITH PILLOW SPEAKER. SEE ELECTRICAL DRAWINGS.

26.16 WALL PHONE. SEE ELECTRICAL DRAWINGS.

26.17 FLOOR MOUNTED MULTI FUNCTION PRINTER/COPIER. SEE ELECTRICALDRAWINGS FOR POWER AND DATA.

26.19 SEE ELECTRICAL DRAWINGS FOR FLOOR BOX RECESSED IN CONCRETE TOPROVIDE POWER AND DATA CONNECTION TO THE TABLE. COORDINATE WITHOWNERS VENDOR MIDWEST FURNITURE FOR LOCATION OF THE TABLE LEGS TORUN ELECTRICAL CONNECTIONS TO THE TABLE.

GENERAL NOTES

A. SEE SHEET G003 AND G005 FOR SYMBOLS, GENERAL NOTES AND LEGEND.

B. SEE SHEET A505A FOR CABINET LEGEND.

C. SEE SHEET A601A FOR DOOR SCHEDULE AND WINDOW SCHEDULE

E. SEE SHEET A602A FOR FINISH SCHEDULE AND GENERAL NOTES.

NORTH

SCALE: 1/4" = 1'-0"1Floor Plan Level 1

5 ASI #8 May 28, 2020

4' -

0"

2' - 6" 2' - 6" 2' - 6"

7' -

2"

T1 T1 T1

TYP.

06.04

06.14

26.04

09.01

CLR.

2' - 6" 2' - 4 1/2" 2' - 4 1/2" 2' - 4 1/2"

2' - 6" 2' - 4 1/2" 2' - 4 1/2" 2' - 4 1/2" 2' - 4 1/2"

3' -

0"

1' -

10

"2

' -

10

"

B4 B4 B4

W2 W2 W2 W2

06.21

10.02

10.01

06.13

06.20

11.11

TYP.

06.06

06.14

B1

Op

en

6"

2' -

10

"

E N N E

D

06.25

06.24

06.27

11.03

26.22

11.08

22.11

26.23

06.10

06.26

2' -

10

"1

' -

10

"3

' -

0"

1' - 6" 2' - 6" 2' - 6"

2' - 6"2' - 6"

W2 W2

B3 B4 B2

06.14

08.02

06.20

22.05

06.21

10.0110.02

09.01

06.06

06.05

2' -

10

"

08.07

08.02

11.10

2' -

10

"

1' - 8" 1' - 8"

B3 B3

09.39 09.38

08.02

06.20

06.0706.07

01.0801.16

3' -

7 1

/2"

1' - 6" 2' - 6" 2' - 6" 2' - 6" 2' - 6"

B3 B4 B4 B2

06.20

09.04

06.21

TYP.

06.08

11.11 2' -

10

"

09.39

3' -

0"

1' - 4"

2' -

6"

B6

09.04

06.20

4' - 0" 1' - 4" 4' - 0" 1' - 4"

2' -

6"

3' -

0"

B6 B6

09.0406.20

3' -

0"

2' -

6"

1' - 4"

B6

09.04

06.20

3' -

0"

1' - 4" 3' - 6" 1' - 4"

2' -

6"

B6 B6

3' - 6"

09.04

06.20

3' -

4"

2' - 9" 2' - 3" 2' - 3" 1' - 4"

2' -

10

"

B2 B4 B4 B3

TYP.

06.05

06.08

06.2122.05 09.04 06.20

3' -

4"

2' -

10

"

2' - 9" 2' - 3" 2' - 3"

B2 B4 B4

1' - 4"

B3

06.2109.04

TYP.

06.05

22.05 06.20

06.08

1' - 8"

10.02 10.01

22.02

10.12

12.02

Open

4' -

0"3 1/8" 3' - 0"

2' -

10

"

09.38

11.09

10.0609.16

26.0510.12

U.C.

REF.

2' -

10

"

MIN.

2' - 6" CLR. 2' - 3" 1' - 2"

B4 B5

2' - 6" 3' - 0"

W1 W2

B1

3"

1' -

10

"3

' - 0

"

FE

06.20

06.21

10.02

10.0110.20

06.14

11.11

06.11

6"

5' -

6"

9" W3

AC-1

W3

FC09.01

22.02

10.05

22.01

10.0610.06

09.23

09.24

NC

6"

5' -

6"

9"

W3

FC

W3

AC-1

10.06

22.01 09.01

10.06 26.14

09.23

09.24

10.01

09.01

08.01

09.01

10.02

09.01

9' -

0"

10' - 8"

08.115

CR

08.09

11.06

08.01

09.01

11.12 11.13

2' - 6" 2' - 6" 2' - 6" 2' - 6"

T1 T1 T1 T1

7' -

0"

06.14

09.38

3' -

6"

06.20

06.09

2' -

10

"

3' - 1"

09.04

3' -

6"

2' -

10

"

09.04

06.20

3' - 1"

06.09

SELVAM

RAJAVELU

267857-0301


NJRA Project #



5/2

8/2

020 1

2:4

5:3

0 P

M

A252

InteriorElevations

Inte

rmo

un

tain

He

alth

ca

re

No

rth

po

inte

Me

dic

al P

ark

, B

ldg

B

2356 N

ort

h 4

00 E

ast

, Su

ite

#102

Too

ele

, U

tah

84074

19230.00


Too

ele

Va

lley D

ialy

sis

Clin

ic E

xp

an

sio

n

SCALE: 3/8" = 1'-0"1A124 Med Room - North

SCALE: 3/8" = 1'-0"2A124 Med Room - South

SCALE: 3/8" = 1'-0"4A129 Private/ Isolation - South

SCALE: 3/8" = 1'-0"5A129 Private/ Isolation - West

SCALE: 3/8" = 1'-0"6A129 Private/ Isolation - North

SCALE: 3/8" = 1'-0"7A116 Lab Alcove - East

SCALE: 3/8" = 1'-0"8A116 Lab Alcove - West

SCALE: 3/8" = 1'-0"9A115 Nurse Station - East

SCALE: 3/8" = 1'-0"10A109 Nurse Station - South

SCALE: 3/8" = 1'-0"11A109 Nurse Station - West

SCALE: 3/8" = 1'-0"12A115 Nurse Station - North

SCALE: 3/8" = 1'-0"13A143 Corridor - South

SCALE: 3/8" = 1'-0"14A143 Corridor - North

SCALE: 3/8" = 1'-0"15A142 Hand Wash Sink - North

SCALE: 3/8" = 1'-0"3A142 Floor Scale Alcove - West

SCALE: 3/8" = 1'-0"17A105 Nourishment - South

SCALE: 3/8" = 1'-0"18A102 Public Toilet - East

SCALE: 3/8" = 1'-0"19A102 Public Toilet - South

SCALE: 3/8" = 1'-0"20A102 Public Toilet - West

SCALE: 3/8" = 1'-0"21A102 Public Toilet - North

SCALE: 3/8" = 1'-0"22A101 Waiting - North

SCALE: 3/8" = 1'-0"23A101 Waiting - South

KEYED NOTES

GENERAL NOTES

A. SEE SHEET G003 AND G005 FOR SYMBOLS, GENERAL NOTES AND LEGEND.

B. SEE SHEET A505A FOR CABINET LEGEND.

C. SEE SHEET A601A FOR DOOR SCHEDULE AND WINDOW SCHEDULE

E. SEE SHEET A602A FOR FINISH SCHEDULE AND GENERAL NOTES.

01.08 CLEAN GOWN STORAGE.

01.16 SOILED GOWN STORAGE.

06.04 PLASTIC LAMINATE TALL CABINET FILLER PANEL AS REQUIRED. FILLER PANEL TOMATCH PROFILE AND FINISH OF ADJACENT CABINETS.

06.05 PLASTIC LAMINATE BASE CABINET FILLER PANEL AS REQUIRED. FILLER PANEL TOMATCH PROFILE AND FINISH OF ADJACENT CABINETS.

06.06 PLASTIC LAMINATE WALL CABINET FILLER PANEL AS REQUIRED. FILLER PANELTO MATCH PROFILE AND FINISH OF ADJACENT CABINETS.

06.07 CABINETS TO BE LOCKABLE.

06.08 ALL SINK CABINETS TO BE LOCKABLE, TYPICAL.

06.09 PROVIDE P-LAM FINISHED PANEL AT SIDE OF CABINET.

06.10 30" WIDE P-LAM LIFT UP ACCESS PANEL WITH STAINLESS STEEL CONTINUOUSCONCEALED PIANO HINGE AND MOUNTING BRACKET. CENTER ACCESSPANEL ON WALL BOX BELOW.

06.11 P-LAM END PANEL.

06.13 GLASS PARTITION BETWEEN DIRTY AND CLEAN SIDE. GLASS TO BE 1/2" THICK XDEPTH OF COUNTERTOP. GLASS TO SPAN FROM TOP OF COUNTERTOP TOBOTTOM OF UPPER/WALL CABINET. PROVIDE 3" RADIUSED EDGE ON THEEXPOSED EDGE. PROVIDE POLISHED EDGES AT ALL/TWO EXPOSED EDGES.

PROVIDE 1/2" X 1/2" X CONT, STAINLESS STEEL RECEIVING CHANNEL TOHOLD THE GLASS IN PLACE. CUT COUNTER BACKSPLASH TO ANCHOR GLASSTO WALL BEHIND.

06.14 P-LAM CLOSER PANEL TO CEILING ABOVE. SEE DETAIL 2/A505B

06.20 SOLID SURFACE COUNTER WITH FULL BULLNOSE EDGE AND INTEGRALBACKSPLASH. SEE DETAIL 5/A505B AND 8/A505B. PROVIDE INTEGRAL SIDESPLASH WHERE COUNTER ABUTS PERPENDICULAR WALL/CABINET.

06.21 SOLID SURFACE INTEGRAL SINK. BASIS OF DESIGN: SAMSUNG, STARON A1181SINK, COLOR "BRIGHT WHITE" BW010. ALSO SEE PLUMBING DRAWINGS.

06.24 TALL CABINET. SEE CASEWORK LEGEND.

06.25 P-LAM LOCKABLE ACCESS PANEL WITH STAINLESS STEEL CONTINUOUSCONCEALED PIANO HINGE AND MOUNTING BRACKET.

06.26 P-LAM LOCKABLE STORAGE CABINET WITH DOOR TO STORE PATIENTBELONGINGS. SEE DETAILS ON SHEET A505C.

06.27 BUILT IN CASEWORK FOR CHASE WALL WITH PLASTIC LAMINATE FASCIA PANELAND MELAMINE BACK. USE MARINE GRADE PLYWOOD THROUGHOUT. SEEDETAILS ON SHEET A505C.

08.01 NEW DOOR. SEE DOOR SCHEDULE FOR MORE INFORMATION. WOOD DOORAT THE BUILDING HALLWAY SHALL MATCH COLOR AND FINISH OF THEADJACENT EXISTING WOOD DOORS IN THE HALLWAY. WOOD DOORS INSIDETHE REMODEL SUITE SHALL BE CLEAR MAPLE FINISH.

08.02 CORNER ALUMINUM WINDOW. BASIS OF DESIGN KAWNEER VG TRIFAB 451.SEE WINDOW SCHEDULE. GLAZING TO BE 1/4" THICK, CLEAR, TEMPERED.

08.07 OVERHEAD CONCEALED FULL BREAKOUT TRACKLESS UL 1784 SMOKE RATEDNARROW STILE SINGLE SLIDE ALUMINUM AND GLASS DOOR. BASIS OF DESIGN:ASSA ABLOY VERSAMAX ICU DOOR SYSTEM. GLAZING TO BE 1/4" CLEARTEMPERED. SEE DETAIL 8/A601A & 10/A601A.

08.09 ALUMINUM AND GLASS MANUAL SLIDING WINDOW. BASIS OF DESIGN C. R.LAURENCE DW 4200 A TWO PANEL MANUAL DELUXE LOCKABLE SLIDINGWINDOW. FINISH: SATIN ANODIZED. SEE SHEET A601A.

08.11 NEW 45 MINUTE FIRE RATED GLAZED HOLLOW METAL DOOR WINDOW FRAMESYSTEM TO MATCH LOOK OF THE STOREFRONT SYSTEM OF OTHER ADJACENTSUITES AT THE BUILDING HALLWAY. SEE DOOR SCHEDULE ON SHEET A601A FORMORE INFORMATION.

09.01 WALL BASE. SEE FINISH SCHEDULE.

09.04 PARTIAL HEIGHT WALL WITH SOLID SURFACE CAP. SEE WALL TYPE 'P' ON SHEETA501.

09.16 CORNER GUARD, 2" X 2" X 4'-0". SEE FINISH SCHEDULE. SEE DETAIL 11/A601B.TOP OF CORNER GUARD TO ALIGN WITH TOP OF WALL PROTECTIONWAINSCOT. TYP.

09.23 WALL FIELD TILE. SEE FINISH SCHEDULE

09.24 WALL ACCENT TILE. SEE FINISH SCHEDULE

09.38 GYPSUM BOARD SOFFIT. SEE DETAIL 9/A503A.

09.39 GYPSUM BOARD HEADER. SEE DETAIL 6/A503A.

10.01 SOAP DISPENSER. OFCI. SEE SHEET G004 FOR MOUNTING HEIGHT.

10.02 PAPER TOWEL DISPENSER. OFCI. SEE SHEET G003 FOR MOUNTING HEIGHT.

10.05 MIRROR. 24 INCHES WIDE X 36" HIGH. SEE SPECIFICATIONS. MOUNT MIRRORSUCH THAT THE REFLECTIVE SURFACE OF MIRROR IS NO MORE THAN 40 INCHESAFF. SEE SHEET G003 FOR MOUNTING HEIGHT.

10.06 GRAB BARS. SEE SPECIFICATIONS. PROVIDE 'TYPE 1' METAL STUD BACKING PERDETAIL 5/A502A. SEE SHEET G003 FOR MOUNTING HEIGHTS.

10.12 WALL PROTECTION WAINSCOT, 0.06 INCH THICK. SEE FINISH SCHEDULE. ALIGNTOP OF WAINSCOT WITH TOP OF CORNER GUARD WHERE OCCURS. SEEDETAIL 4/A602A.

10.20 MICROWAVE, OFCI. SEE ELECTRICAL DRAWINGS. FOR MICROWAVE IN WALLCABINET PROVIDE OUTLET IN THE CABINET ABOVE WITH A GROMMETOPENING AT THE BASE OF THIS CABINET.

11.03 PATIENT CHAIR/ RECLINER, OFOI.

11.06 WALL MOUNTED MONITOR OFCI. SEE ELECTRICAL DRAWINGS. PROVIDE 3'-0"W X 2'-0" H X 18 GA SHEET METAL BACKING.

11.08 TABLO HEMODIALYSIS SYSTEM. PROVIDED AND INSTALLED BY OWNERSVENDOR.

11.09 WALL MOUNTED READOUT PANEL FOR SCALE, O.F.C.I. SEE ELECTRICALDRAWINGS FOR POWER AND DATA. INSTALL PER MANUFACTURESRECOMMENDATION. CONTACT OWNER FOR MORE INFORMATION.

11.10 CEILING MOUNTED TV. OFCI. PROVIDE 3" STAINLESS STEEL GROMMET ATOPENING IN CEILING TILE AT ALL CEILING MOUNTED TV LOCATIONS, TYPICAL.

11.11 UNDERCOUNTER REFRIGERATOR. OFOI. SEE ELECTRICAL DRAWINGS FORPOWER AND DATA.

11.12 VENDING MACHINE, OFOI. SEE ELECTRICAL DRAWINGS

11.13 ICE AND WATER DISPENSER ON STAND, OFCI. SEE PLUMBING DRAWINGS.

12.02 PRIVACY CURTAIN AND TRACK. SEE FINISH SCHEDULE AND PROJECT MANUAL. SEE DETAIL 13/A503A

22.01 FLOOR MOUNTED WATER CLOSET. SEE PLUMBING DRAWINGS.

22.02 WALL MOUNTED HAND WASH SINK. SEE PLUMBING DRAWINGS.

22.05 COUNTER MOUNTED EYE WASH. SEE PLUMBING DRAWINGS.

22.11 DIALYSIS HOSE AND SUPPLY BOX. SEE PLUMBING DRAWINGS. VERIFYLOCATION AND HEIGHT WITH OWNER BEFORE INSTALLATION.

26.04 WALL MOUNTED PLUG STRIP. SEE ELECTRICAL DRAWINGS.

26.05 IN WALL CONDUIT FOR LOAD CELL CABLE. SEE MANUFACTURER ANDELECTRICAL DRAWINGS.

26.14 NURSE CALL WITH PILLOW SPEAKER. SEE ELECTRICAL DRAWINGS.

26.22 LIGHT SWITCH. SEE ELECTRICAL DRAWINGS.

26.23 DEDICATED OUTLET FOR DIALYSIS MACHINE. SEE ELECTRICAL DRAWINGS.

SCALE: 3/8" = 1'-0"16A105 Nourishment - North

SCALE: 3/8" = 1'-0"24A145 Corridor - North

SCALE: 3/8" = 1'-0"25Bay #11

SCALE: 3/8" = 1'-0"26Bay #12

5 ASI #8 May 28, 2020

DOOR OPENING

1/4"

7'-0"

1/4"

1. PRE MANUFACTURED ALUMINUM AND GLASS SLIDINGDOOR. SEE PROJECT MANUAL FOR DETAILS.

2. PROVIDE CLEAR SILICON SEALANT ALL AROUND DOORFRAME- BOTH SIDES OF DOOR.

3. (2) TYP. TRACK PINS AT DECK ABOVE AND FLOOR SLABBELOW.

4. DOUBLE METAL STUDS, SEAM WELD AT 12" O.C. TYP., USE16 GA STUDS.

5. 5/8" THICK, TYPE 'X' GYP. BD. ALL AROUND.

6. 1/4" SHIM SPACE AT EACH JAMB.

KEYED NOTES

12345

6

1. GLAZING SHALL BE CLEAR, TEMPERED, AND 1/4" THICK.

2. DOOR FRAME, SEE DOOR SCHEDULE.

3. WHERE DOOR OCCURS AT MASONRY WALL (8" HIGH, C.M.U. BLOCKS),

AND WITH A TYPICAL DOOR HEIGHT OF 7' - 0", USE 4" FRAME AS FRAME

HEAD INSTEAD OF THE STANDARD 2" FRAME.

KEYED NOTES

1

2"

SEE DOORSCHEDULE 2"

2"

SEE D

OO

R S

CH

ED

ULE

2

2"

SEE DOORSCHEDULE

2"1' - 2"

2"

SEE D

OO

R S

CH

ED

ULE

2"

4"

4

2"

SEE DOORSCHEDULE 2" 3' - 0" 2"

SEE D

OO

R S

CH

ED

ULE

2"

3' -

4"

2"

5

2"

SEE DOORSCHEDULE 2"

2"

SEE D

OO

R S

CH

ED

ULE

2"

6

2"

SEE DOORSCHEDULE 2"

1' - 2"

2"

2"

SEE D

OO

R S

CH

ED

ULE

2"

2 2 2

2 2

1

1

1 1 1

1

1' -

4"

1' -

4"

NOTE: REFER TO "DOOR SCHEDULE" FOR FRAME TYPES REQUIRED FOR THIS PROJECT. SOME FRAME TYPE

ELEVATIONS INDICATED ABOVE MAY NOT BE APPLICABLE TO THIS PROJECT.

DASHED LINE DENOTES

FINISH FLOOR

3 3

3

2"

SEE DOORSCHEDULE

2"1' - 2"

2"

SEE D

OO

R S

CH

ED

ULE

2"

4"

2' -

8"

2"

2

1

3 3

7

2"

SEE DOORSCHEDULE 2"

1' - 2"

2"

2"

SEE D

OO

R S

CH

ED

ULE

2"

2

1 1

1

1' -

4"

4"2

' -

8"

2"

DASHED LINE DENOTES

FINISH FLOOR

1. VISION PANEL. GLAZING IN VISION PANEL SHALL BE 1/4" THICK, CLEAR,

TEMPERED, GLAZING. FOR WOOD DOOR, PROVIDE WOOD TRIM FRAME

FLUSH WITH THE FACE OF THE DOOR, AROUND THE VISION PANEL

OPENING. STAIN AND SPECIES OF WOOD TRIM SHALL MATCH WOOD

DOOR. FOR HOLLOW METAL DOOR, PROVIDE METAL TRIM AROUND

VISION PANEL. GLAZING SHALL BE FIRE RATED IF DOORS ARE REQUIRED

TO BE FIRE RATED.

2. FOR EXTERIOR DOORS OF THIS TYPE, GLAZING SHALL BE TINTED,

INSULATED, TEMPERED, LOW E, AND 1" THICK. FOR INTERIOR DOORS OF

THIS TYPE, GLAZING SHALL BE CLEAR, TEMPERED AND 1/4" THICK.

3. STAINLESS STEEL WELDED WIRE MESH (15 GAUGE) ATTACHED TO DOOR.

PROVIDE FRAME AROUND THE OPENING IN DOOR TO SECURE THE MESH

IN PLACE.

4. METAL LOUVER IN DOOR FOR VENTILATION.

KEYED NOTES

TYPE - A

SEE D

OO

R S

CH

ED

ULE

SEE DOORSCHEDULE

TYPE - B

SEE D

OO

R S

CH

ED

ULE

SEE DOORSCHEDULE

3' -

6"

2' -

9"

1

TYPE - C

SEE D

OO

R S

CH

ED

ULE

SEE DOORSCHEDULE

8"

6"

6' -

0"

6"

1

TYPE - D

SEE D

OO

R S

CH

ED

ULE

SEE DOOR SCHEDULE

1

NOTE: REFER TO "DOOR SCHEDULE" TABLE FOR DOOR TYPES REQUIRED FOR THIS PROJECT. SOME DOOR TYPE ELEVATIONS

INDICATED ABOVE, MAY NOT BE APPLICABLE TO THIS PROJECT.

2' -

6"

3' -

6"

DASHED LINE DENOTES

FINISH FLOOR

8"

6"

SEE DOORSCHEDULE

SEE D

OO

R S

CH

ED

ULE

TYPE - E

DASHED LINE DENOTES

FINISH FLOOR

5"

5"

5"

10

"

1

TYPE - F

2

7

A506A

8

A506A

410' - 8"

2"

8"

2"

6' -

6"

2"

1' -

2"

2"

2" 4' - 0" 2" 3' - 0" 2" 3' - 0" 2"

9' -

0"

6

2

2 2

2

2 2

2' -

10

"4

' - 4

"

4' - 0"

1

1

3' -

0"

4' -

2"

2' - 9 1/4"

9

A506A

9

A506A

3' -

0"

4' -

2"

1

1' - 5 7/8"

SEE D

OO

R S

CH

ED

ULE

SEE DOOR SCHEDULE

1

10

A601A

8

A601A

1. GLAZING SHALL BE CLEAR, TEMPERED, AND 1/4" THICK.

2. 45 MINUTE FIRE RATED GLAZING REQUIRED AT THIS

DOOR WINDOW SYSTEM.

3. MITER GLASS AT CORNER.

4. 45 MINUTE FIRE RATED HOLLOW METAL DOOR WINDOW

FRAME SYSTEM. COLOR TO MATCH ADJACENT EXISTING.

5. ALUMINUM AND GLASS MANUAL SLIDING WINDOW. CR

LAWRENCE DW 4200 A TWO PANEL MANUAL DELUXE

LOCKABLE SLIDING WINDOW. FINISH: SATIN ANODIZED.

6. 45 MINUTE FIRE FATED HOLLOW METAL GLAZED DOOR.

KEYED NOTES

2' - 11 3/8"

1' -

8"

PLAN

3

SC

HED

ULE

SEE

DO

OR

FRAME DEPTH

STUD SIZE

HEAD DETAIL - SECTION VIEW

1. CONTINUOUS SEALANT ON BOTH SIDES OF

THE FRAME.

2. DOOR FRAME SEEN BEYOND.

3. DOOR, SEE DOOR SCHEDULE FOR DOOR

TYPE.

4. GYPSUM BOARD, 5/8" THICK, TYPE 'X'. ATTACH

TO METAL STUD FRAMING. SEE WALL TYPES.

5. STEEL RUNNER (18 GAUGE) FASTENED WITH

SCREWS TO STRUT STUDS AT EACH END. SEE

DETAIL

6. HOLLOW METAL DOOR FRAME. FRAME

THICKNESS VARIES WITH WALL THICKNESS. SEE

FLOOR PLAN AND WALL SECTIONS. PAINT

FRAME.

7. SEE WALL TYPES FOR WALL WIDTH AND STUD

SIZE.

8. FRAME DEPTH SHALL BE WALL WIDTH PLUS 1".

9. LINE OF WALL, AS OCCURS.

10. PROVIDE DOUBLE METAL STUDS AT FRAME

JAMBS, WALL ENDS, ETC. PROVIDE STEEL

STRAPS (6" HIGH 16 GAUGE STRAPS AT 2'-0"

O.C.) SEE DETAIL

11. DOOR HINGE AS OCCURS. SEE DOOR AND

HARDWARE SCHEDULE. SEE FLOOR PLAN FOR

DOOR SWING.

1

5

2

3

1

4

SC

HED

ULE

SEE

DO

OR

FRAME DEPTH

STUD SIZE

1

5

2

3

1

4 4

8

8

WALL WIDTHWALL WIDTH

77

1/2" 1/2"

6

6

4

1/2"1/2"

KEYED NOTES

2"FR

AM

E D

EP

TH

STU

D S

IZE

614

4

10

9 11 31

2"

2"

FR

AM

E D

EP

TH

STU

D S

IZE

614

4

10

9 11 31

JAMB DETAIL - PLAN VIEW

2"

1/2

"1

/2"

7"

WA

LL W

IDTH

WA

LL W

IDTH

77 8 81/2

"1

/2"

/6 A502A

/7 A502A

SP

AC

E1

/4"

SH

IM

PA

CK

AG

E H

EIG

HT:

89

3/4

"

RO

UG

H O

PEN

ING

: 9

0"

1. SEE DETAIL 6/A502A FOR FRAMING AT DOOR

HEADER.

2. MANUAL SLIDING DOOR ALUMINUM AND GLASS

DOOR AS SCHEDULED.

3. PROVIDE CLEAR SILICON CAULKING ALL AROUND

DOOR - BOTH SIDES.

4. GYP. BD. SOFFIT AS SCHEDULED.

5. SHIM AS REQUIRED.

KEYED NOTES

1

3

3

2

5

SELVAM

RAJAVELU

267857-0301


NJRA Project #



5/2

8/2

020 1

2:4

5:3

2 P

M

A601A

Door &Window

Schedule

Inte

rmo

un

tain

He

alth

ca

re

No

rth

po

inte

Me

dic

al P

ark

, B

ldg

B

2356 N

ort

h 4

00 E

ast

, Su

ite

#102

Too

ele

, U

tah

84074

19230.00


Too

ele

Va

lley D

ialy

sis

Clin

ic E

xp

an

sio

n

DOOR #

DOOR FRAME DETAILS

DOOR #

FIRE

RATING

(MINUTES)

HARDWARE

GROUPCOMMENTS# OF

PANELS

WIDTH SIZE TYPE

(2/A601A)DEPTH MATERIAL JAMB HEAD THRESHOLD

W1 W2 HEIGHT THICKNESS MATERIAL

TYPE

(1/A601A)

A101A 1 4' - 0" 8' - 0" 1 3/4" HM E W1 7 3/4" HM 9/A601A 9/A601A A101A 45 1 6

A101B 1 4' - 0" 7' - 0" 1 3/4" WD E 1 8 1/4" HM 9/A601A 9/A601A A101B 2 1,2

A102 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A102 11

A103 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A103 13

A104 1 3' - 0" 7' - 0" 1 3/4" WD D 1 5 7/8" HM 9/A601A 9/A601A A104 10

A123 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A123 11

A124 1 3' - 0" 7' - 0" 1 3/4" WD D 1 5 7/8" HM 9/A601A 9/A601A A124 7 1

A126 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A126 7 1

A127 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A127 9

A128 1 3' - 6" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A128 5 1,3

A129 7' - 0" 7' - 6" AL F MFR. AL 8/A601A 10/A601A A129 12 5

A130 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A130 10

A131 1 4' - 0" 7' - 0" 1 3/4" HM A 1 5 7/8" HM 9/A601A 9/A601A A131 4 1

A132A 1 4' - 0" 7' - 0" 1 3/4" HM A 1 5 7/8" HM 9/A601A 9/A601A A132A 6

A133 2 2' - 6" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A133 8

A134 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A134 10

A135 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A135 9

A136 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A136 10

A137 1 4' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A137 4 1

A138 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A138 10

A139 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A139 11

A140 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A140 9

A141 1 3' - 0" 7' - 0" 1 3/4" WD A 1 5 7/8" HM 9/A601A 9/A601A A141 10

A142 1 4' - 0" 7' - 0" 1 3/4" WD A 1 7 3/4" HM 9/A601A 9/A601A A142 45 3 1,4

COMMENTS

DOOR SCHEDULE

SCALE: 1/4" = 1'-0"2Frame Types

SCALE: 1/4" = 1'-0"1Door Types

SCALE: 1/4" = 1'-0"3Window Legend

W2 W3W1

NOTES:

1. CARD READER REQUIRED AT THIS DOOR.

2. DOOR RELEASE REQUIRED AT THIS DOOR FROM THE NURSE STATION AND SHARED OFFICE.

3. PROVIDE SAFE ZONE CLOSER AT THIS DOOR.

4. PROVIDE AUTO-OPENER AT THIS DOOR.

5. BREAKOUT SLIDING ALUM. GLASS DOOR. SEE SPECIFICATIONS.

6. 45 MINUTE FIRE RATED HOLLOW METAL DOOR AND WINDOW FRAME REQUIRED.

CONTRACTOR SHALL FEILD VERIFY ADJACENT EXISTING STOREFRONT AT THE BUILDING

HALLWAY TO MATCH WITH THE DOOR WINDOW SYSTEM IN APPEARANCE AND COLOR.

SCALE: 3" = 1'-0"9Door Frame in Stud Wall

5 ASI #8 May 28, 2020

SCALE: 3" = 1'-0"8Manual Sliding Breakout Door at Isolation Rooms

SCALE: 3" = 1'-0"10Sliding Door Head Detail

MFR. MFR.

45 MIN. - FIRE RATED (H.M.) SLIDING WINDOW (ALUMINUM) ALUMINUM WINDOW

5

5

5

5

5

1

1

2

2

4

4

A A

B B

S-1

S-1 S-1

S-2

SS-1

SB-1 SB-1 SB-1

L-1

FD-1

SB-1

FD-1

WC-1

S-2

WC-1

4"

4"

3"

S-1

SB-1SB-1

S-1

S-1

SB-1

3"

3"

S-1

SB-1

SB-1

SB-1

SB-1

S-1

SB-1

S-1

WC-1

FD-1

L-1

SB-1

SB-1SB-1SB-1

SB-1SB-1

L-2

FS-1

3"

FS-1

3"S-1

WO-1

2" V UP

1 1/2" V UP

1 1/2" V UP

3"

FS-1

FS-1

1 1/2" V UP

3" V UP

3" V UP

3" V UP

2"3"

3"

2" W UP

3"

2" W UP

2" W UP

3"

3"

2" W UP

2

1

SB-1 SB-1

1

PP301

3

SB-1

3"4"

L-12" V UP

5

4

4

6

W UP

W UP

W UPW UP

6

3"

DCW UP

DCW UP

DHW UPDHW UP

3/4" DCW UP

1" DHW UP

DCW UP

DHW UP

DHW UP

1" DHW UP3/4" DCW UP

RE

GIS

TER

E

DPROFESSIONA

L

EN

GIN

EE

R

No. 11599476-2202

S

TA

T E OF UTAH

DALLEN BLAIR

ROMRIELL

02.03.2020

W W W . V B F A . C O M

ASSOCIATES, INC.

VAN BOERUM& FRANK

801.530.3148 T

801.530.3150 F

CONSULTING ENGINEERS

330 South 300 East

Salt Lake City, UT 84111

Salt Lake City▪ Logan ▪ St. George ▪ Tempe

VBFA Project Number: 19605


NJRA Project #



5/2

9/2

020 1

0:3

4:4

0 A

M

PP100

BELOWGRADE

PLUMBINGPLAN

Inte

rmo

un

tain

He

alth

ca

re

40

0 E

ast

240

0 S

ou

th

Too

ele

, U

tah

84

07

4

19230.00

Construction Documents February 03, 2020

Dia

lysi

s C

linic

Exp

an

sio

n

SCALE: 1/4" = 1'-0"1BELOW GRADE PLUMBING PLAN

NORTH

KEYED NOTES#

1. EXISTING ELEMENTS SHOWN LIGHT, TYPICAL.

2. CONTRACTOR RESPONSIBLE FOR COORDINATING AND LOCATING ALL CLEANOUTS PER CODE IN ADDITION TO CLEANOUTS CALLED OUT ON PLANS, TYPICAL.

3. WALLS SHOWN FROM ABOVE, TYPICAL.

4. CAP IN FLOOR.

5. FLOOR CUT FOR EXISTING WASTE DROP. TIE INTO NEAREST WASTE LINE.

6. FLOOR CUT TO TIE INTO EXISTING DROP LOCATIONS.

1 Addendum #1 02/17/20

2 Addendum #2 02/18/20

3 ASI-001 03/02/20

4 ASI-006 05/14/20

5 ASI-008 05/29/20

5

1 2 4

A

B

BAY #11

A119

PRIVATE/ISOLATION

A129

TDR

A126

SHARED OFFICE

A104

WAITING

A101

PUBLIC TOILET

A102

BAY #7

A113

BAY #5

A111

BAY #3

A108

BAY #2

A107

BAY #1

A106

(E) ELEVATOR

A140

(E) ELEVATOR MACHINEROOM

A141

(E) HSKP

A142

STAFF

BREAK/CONFERENCEROOM

A134STORAGE

A132

MANAGER OFFICE

A130

LAB ALCOVE

A116

BAY #10

A118

BAY #6

A112

EXAM/ HOME TRAININGROOM

A136HOME TRAINING ROOM

A138

CLEAN SUPPLY

A131

BAY #8

A114

BAY #4

A110

BAY #9

A117

BAY #12

A120

BAY #13

A121

BAY #14

A122

PATIENT TOILET

A123HSKP

A127

SOILED WORKROOM

A128

FUTURE EXAM/ HOMETRAINING ROOM

A141

STAFF TOILET

A139BIO MED

A137

ELEC

A135

MED ROOM

A124

MECH

A140

MECH

A133

NOURISHMENT

A105

MECH

A103

WHEELCHAIR ALCOVE

A125

WC-1

S-2WC-1

WC-1L-1

S-1

L-1

S-2

S-1 S-1

S-1

S-1

S-1

S-1

S-1

L-2

WH

1

FUR

3

FUR

1

S-1

SS-1

FS-1

FD-1

FD-1

FD-1

FS-1

FS-1

1

SB-1 SB-1 SB-1

SB-1

SB-1

SB-1

SB-1

SB-1SB-1SB-1

SB-1SB-1

FS-1

2

3

FUR

2

3

3

4

FUR

4

3/4" PC

5SB-1 SB-1 SB-1

SB-1

SB-1

SB-1

3/4" G

EW-1

EW-1

21

21

WO-1

1 1/4"

2"

2"3/4"

DET

1

3/4"

1 1/4"

6

7

7

7

3/4"1"

1 1/4" 1"

1 1/4"

7

2"

1 1/4"

1 1/4" 3/4"

3"

3" V UP

3" V UP

3"3" V UP 8

2"3"

3" V UP 8

3" V UP8

2"

3"

3" V UP

8

3"

3" V UP

3" V UP 8

1 1/2" V UP

3" V UP 8

3" V UP

3" V UP3"

3" V UP

3"

8

3" V UP8

S-1

IU

1B

IU

1A

3"

10

12

13 11

13 14

3"

EW-1

6

SB-1

SB-1

SB-1

14

3" V UP

3"

8

1" DWS

1 1/2" DWS

14

3"

3"

1 1/2" DWS

3/4"

9 3/4" DWR

1 1/2"

GPM0.5

GPM2.0

6

RCP

2

RCP

1

15

16

EW-1

EW-1

WO-2

1

PP301

17

3"

1 1/4"3/4"

2" V DN

L-1

3"

19

20

20

W DN

W DN20

20

W DN

W DN

W DN

1" DHW DN3/4" DCW DN

DHW DN

DHW DN

DHW DN

DHW DN

3/4" DCW DN

DCW DN

1" DHW DN3/4" DCW DN

RE

GIS

TER

E

DPROFESSIONA

L

EN

GIN

EE

R

No. 11599476-2202

S

TA

T E OF UTAH

DALLEN BLAIR

ROMRIELL

02.03.2020

W W W . V B F A . C O M

ASSOCIATES, INC.

VAN BOERUM& FRANK

801.530.3148 T

801.530.3150 F

CONSULTING ENGINEERS

330 South 300 East

Salt Lake City, UT 84111

Salt Lake City▪ Logan ▪ St. George ▪ Tempe

VBFA Project Number: 19605


NJRA Project #



5/2

9/2

020 1

0:3

4:4

4 A

M

PP101

LEVEL 1PLUMBING

PLAN

Inte

rmo

un

tain

He

alth

ca

re

40

0 E

ast

240

0 S

ou

th

Too

ele

, U

tah

84

07

4

19230.00

Construction Documents February 03, 2020

Dia

lysi

s C

linic

Exp

an

sio

n

KEYED NOTES#

1. EXISTING ELEMENTS SHOWN LIGHT TO REMAIN, TYPICAL.

2. INSTALL NEW FIRE SPRINKLERS.

3. RELOCATE EXISTING PRV

4. INSTALL NEW 4 OZ PRV.

5. DROP DOWN WALL AND TERMINATE IN SERVICE SINK.

6. THERMOSTATIC MIXING VALVE INSTALLED IN CEILING.

7. PROVIDE HAMMER ARRESTOR ON ALL FAST ACTING VALVES, TYPICAL.

8. FIELD VERIFY LOCATION OF EXISTING VENT LINES PENETRATING LEVEL 2 FLOOR. CONNECT NEW VENT LINES TO EXISTING VENT LINES PENETRATING LEVEL 2 FLOOR. RUN ADDITIONAL PIPING AS NECESSARY.

9. OWNER PROVIDED WATER SOFTENER.

10. CONNECT TO OWNER PROVIDED WATER SOFTENER.

11. ALL SPRINKLER HEADS SHALL BE QUICK RESPONSE THROUGHOUT EACH REMODELED COMPARTMENT, TYPICAL. FIRE SPRINKLERS SHALL BE INSTALLED TO MEET NFPA 13-2016 REQUIREMENTS, TYPICAL.

12. INSTALL THERMOSTATIC MIXING VALVE FOR REVERSE OSMOSIS APPLICATIONS.

13. INSTALL FIRE SPRINKLER SPRINKLERS AND PIPING AS NECESSARY FOR THE REMODELED SPACE, INCLUDING NEW FLOOR PLAN, CEILING PLAN, AND CEILING HEIGHT ADJUSTMENTS. REFER TO THE ARCHITECTURAL SHEETS FOR COMPLETE SCOPE OF THE PROJECT.

14. VALVE AND CAP FOR OWNER TO CHLORINATE LINE.

15. CONNECT RETURN LINE TO WATER HEATER PER MANUFACTURER RECOMMENDATIONS.

16. SEE ARCHITECTURAL PLANS FOR ELEVATION AND EXACT LOCATION OF SUPPLY BOX, TYPICAL.

17. TYPICAL CLEANOUT, SEE PP301 FOR SECTION.

18. DISASSEMBLE GAS PIPING FOR SHEETROCK INSTALLATION TO JOISTS.

19. DISCONNECT WASTE PIPING IN CEILING AND DROP WASTE DOWN EXTERIOR WALL CAVITY. MAKE SURE THAT PIPE IS COMPLETELY COVERED WITH INSULATION ON THE EXTERIOR SIDE OF PIPE. ONCE WASTE PIPING IS BELOW THE CABINET CONTRACTOR CAN JOG BACK TO WHERE THE EXISTING DROP IS LOCATED IN ORDER TO AVOID BREAKING UP CONCRETE.

20. DISCONNECT PIPING IN CEILING AND ROUTE AS SHOWN.

21. INSTALL THERMOSTATIC MIXING VALVE UNDERNEATH COUNTER. RUN HOT AND COLD LINES NEATLY THROUGH CABINETRY.

NORTH

SCALE: 1/4" = 1'-0"1LEVEL 1 PLUMBING PLAN

1 Addendum #1 02/17/20

2 Addendum #2 02/18/20

3 ASI-001 03/02/20

4 ASI-006 05/14/20

5 ASI-008 05/29/20