PIPE HANDLING & SETTING TOOLS 4 – 7 – 14

DEAN BENNETT SUPPLY CO TOLL FREE : 800-621-4291

PRICES ARE YOUR NET COSTSPage 46

$ 199.00 8871

#8871 RANCHER’S PIPE HOLDER is an economical answer to holding galvanized steel pipe that is either beinglowered into the well or being lifted from the well. It is easily adjusted to handle 1”, 1-1/4”, 1-1/2” or 2” steel pipe. The non-shock load limit is rated at 2000 lbs. The catch or clamp has a corrugated and concave face which reduces the possibility of pipe slippage. Pipe holder is mounted on a substantial 2” thick wood base plank.

$ 429.00 K1

PIPE SETTING CLAMP has replaceable serrated jaws of tempered steel – pipe size and tension adjuster is a 7/8” acme threaded rod located inside of the front jaw – will hold 1” thru 2” pipe at any point along the pipe, ( not just at a coupling ) – will handle both galvanized steel pipe and Sch 80 threaded PVC drop pipe equally well tested at up to 3500 lbs. – single handle operation with a safety pin to prevent accidental unclamping or release – light weight ( 14 lbs. ) compact ( 19” L x 4-1/2” W ) – and easy to use – all steel construction and designed with the professional installer in mind.

$ 825.00 K2

PIPE SETTING CLAMP 2 like the Pipe Setting Clamp above, except it has 16 carbide tipped grippers for excellent holding capabilities of 2-1/2” thru 4” pipe, and is tested for 7000 lbs. Weighs 30# and is 20” L x 7-1/2” W. This heavy duty pipe clamp can be used on Stainless Steel, Galvanized, PVC, HDPE. Designed with the profession in mind, will securely hold 2-1/2”, 3”, and 4” pipe anywhere on the pipe, not just at the coupling.

$ 279.00 681NT

#681NT RANCHER’S PIPE DOG is an inexpensive pipe lifting and setting tool – the heavy duty serrated eccentric wheel will handle 3/4” thru 2” pipe without slippage. Has steel cable lift connection this pipe clevis is designed for light weight service only – IT IS NOT LOAD RATED OR TESTED / DO NOT OVER MATCH IT.

BAIL TYPE STEEL PIPE ELEVATORS These bail type steel pipe elevators are designed for the well driller and pump installer. Normally used in pairs, however you can use only one elevator if a pipe holder is also used during installation. All steel fabricated construction allows these heavy duty pipe elevators to handle up to 10,000 lbs.

DENVER STOCK SIZES OF ELEVATORS $ 425.00 Each 10BAIL

1” Elevator Only $ 820.00 when purchased as a pair

$ 455.00 Each 12BAIL

1-1/4” Elevator Only $ 880.00 when purchased as a pair

$ 505.00 Each 15BAIL

1-1/2” Elevator Only $ 980.00 when purchased as a pair

$ 545.00 Each 20BAIL

2” Elevator Only $ 1060.00 when purchased as a pair

$ 595.00 Each 25BAIL

2-1/2” Elevator Only $ 1160.00 when purchased as a pair

$ 640.00 Each 30BAIL

3” Elevator Only $ 1250.00 when purchased as a pair

$ 735.00 Each 40BAIL

4” Elevator Only $ 1440.00 when purchased as a pair

USE THESE ITEMS TO QUALIFY FOR OUR $ 1,000.00 FULL FREIGHT PREPAID & ALLOWED ORDER POLICY