PRICE LIST(Prices Subject to Change

Without Notice)

July, 2009

The Aermotor Co.Phone 325 / 651-4951FAX 325 / 651-4948800 854-1 6564277 Dan Hanks LaneMail Address:P.O. Box 5110San Angelo, TX 76902aermotor@wcc.netwww.aermotorwindmill.com

Aermotor's ~irstfactory, built in the fall of 1890 occupied onlythe large building on the right. Aermotor expanded so rapidlythe build!ng on the left was added. In 1892 the one storybuildinq In the foreground was built and covered one acre.

1888 -The Aermotor was introduced. Only 45 were soldthe first year. The new "mathematical" windmill as it wasderisively called by the competitors, embodied all theprincipals learned from previous experiments. It also hadback gearing which allowed the wheel to make about 3~lrevolutions for each stroke, resulting in much greater liftingpower and smoother pumping action.1892 - Aermotor sold 20,000 windmills and the"mathematical" windmill's image had changed from a joketo a true necessity. Aermotor guaranteed its 8 foot steel millto do more work than any 10 foot wooden mill, it actuallywould do more than some 12 foot mills. Aermotor was on itsway to becoming the world's dominant windmill.1904 - Aermotor catalogs listed a wide range ofaccessories, such as hand pumps, wood and metal tanks,equipment for power mills, such as feed cutters, powersaws, corn shellers and numerous specialty items. (Artistrendering above shows plant that covered almost 300,000square feet of manufacturing space). With theirrevolutionary mass production methods Aermotor was ableto reduce the price of windmills to about 1/6th of theprevious price, 8 ft. windmills then sold for about $25 and20 ft. mills for about $300.1915 - Aermotor introduced its auto-oiled windmill whichhad an enclosed gear case, in which all the working partswere continuously bathed in light lubricating oil. Thisdesign reduced maintenance to only once a year other thanprevious weekly attention.1918 - Aermotor's founder La Verne Noyes donatednearly two and one half million dollars to establishscholarships at many colleges and universities for veteransof the World War. (These scholarships are still availabletoday). The largest benefactors were University of Chicagoand Iowa State Universities in Ames, LaVerne alma mater.1919 - LaVerne Noyes dies. Having no direct heirs, he leftthe Aermotor Company to a tax paying trust, with 48colleges and universities as beneficiaries.1926 - "Bilby" towers, named for their designer, JasperBilby, were introduced. This was a tower within a tower. Theinner tower provided an undisturbed instrument platform.This tower was destined to become widely used by theArmy Engineer Corps as well as the Coast and GeodeticSurvey for much of the remapping of this country. Aermotoralso built the first electric transmission towers and weredesigning and building most of the nation's forestobservation towers. Other products during this period weregasoline engines and electric generators.1933 - Aermotor 702 was introduced, featuringreplaceable bearings and screw-type wheel arms. Aermotordealers and families, attending the "Century of Progress"World's Fair, were allowed to camp in the Aermotor factoryyard and eat in the company restaurant.

AERMOTOR WINDMILLS,A TRADITION FOR OVERA CENTURY, AND STILLMAKING HISTORY!1941 - 1946 Aermotor became a subcontractor for Belland Howell, and built precision lens mounts for the highlysecret Norden Bombsight.1949 - Aermotor's chief engineer, Daniel Scholes, whohad designed Aermotor's deep well electric pump becamepresident.1958 - Aermotor Company was sold to Motor Productscorporation of Detroit, Michigan, a former supplier of partsto the automotive industry.1960 - After purchasing the Bertram Yacht Company,Motor Products Corporation changed its name to Nautec.1964 -Aermotor's manufacturing operation was moved toBroken Arrow, Oklahoma.1965 - Aermotor named Wendell C. Dean, who was salesmanager during Aermotor's transition and growth in theelectric pump market as vice-president and generalmanager.1969 - Aermotor Windmill manufacturing moved toArgentina, and fabricating was performed by Fabrica deImplementos, Agricuolas, S.A., a licensee.1974 -Aermotor manufacturing named James E. Fetters,former export and marketing manager as Vice Presidentand general manager. Aerrnotor's headquarters moves toConway, Arkansas.1976 -Aermotor was purchased by Valley Steel ProductsCo.1979 -The Brentwood, Missouri, operation of Valley Pumpmoved to Conway, Arkansas to the Aermotor plantsand theValley Pump headquarters was established at this location.Daniel F. Benson was named division president.1980 - Valley Steel and Aermotor canceled their licensingagreement with Argentina and returned to themanufacturing of windmills to the U.S.1981 -Aermotor's manufacturing facilities were dedicatedin Arkansas. In that same year 80% of all windmills soldwere built at Conway, Arkansas.1984 - Valley Pump Group was purchased by the MuellerCo. of Decatur, Illinois.1986 -Aermotor was purchased by an investor group andmoved to San Angelo, Texas. The name was changed toAermotor WindmiJI Corporation.1998 - Aermotor was purchased by Kees Verheul.Aermotor has added over 10,000 square feet to the machineshop, and Aermotor's entire manufacturing facilities isabout 30,000 square feet under one roof.2006 -Aermotor was purchased by a private group of WestTexas Ranchers. The name was restored to the originalname that was established in 1888 ...The Aermotor Co.

Aermotor Windmill Component RepairItem Number and Description Price

X A B D E F

875 Basic Motor $1,646.00 $1,748.00 $2,455.00 $3,954.00 $5,216.00 $6,740.0011/32 13/32 15/32 19/32 21/32 25/32

Bearing f/#802 Pitman Arms $15.00 $21.00 $35.00 $40.00 $54.00 $69.00

Special Taps for Aermotor Hubs $58.00 $64.00 $78.00 $158.00 $158.00 $185.00

Box of Bolts for 799 Wheel Assy. $35.00 $40.00 $58.00 $80.00 $95.00 $128.00

Aermotor Complete Windmills (For 4 Post Towers)(Complete Windmills do not Include a tower or stub tower)

Wheel Diameter (Feet) Strokes (inches) Price Weight (Pounds)X 6 5& 33/4 $2,880.00 200A 8 7 118& 5 112 $2,980.00 350B 10 91/4 & 71/4 $4,350.00 640D 12 11 1/2 & 8 114 $7,320.00 1090E 14 13 112& 93/4 $10,550.00 1735F 16 147/8 & 11 3/8 $13,820.00 2380

Aermotor Windmill ComponentsItem 6 Foot Mill (X) 8 Foot Mill (A)

Price Weight Price Weight32 Vane Assembly $240.00 8 $305.00 13664 1/2 Pipe Base Assy. $339.00 17 $388.00 21747 Tail Assembly $235.00 15 $300.00 24799 Wheel Assembly $650.00 60 $802.00 125881 Crated Motor ~1,895.00 100 $1,990.00 167

Item 10 Foot Mill (B) 12 Foot Mill (D)Price Weight Price Weight

32 Vane Assembly $389.00 19 $604.00 426641/2 Pipe Base Assy. $498.00 43 $615.00 70747 Tail Assembly $406.00 48 $667.00 80799 Wheel Assembly $1,480.00 210 $2,370.00 373881 Crated Motor $2,856.00 320 $4,476.00 525

Item 14 Foot Mill (E) 16 Foot Mill (F)Price Weight Price Weight

32 Vane Assembly $785.00 60 $1,168.00 1006641/2 Pipe Base Assy. $1176.00 105 $1,506.00 145747 Tail Assembly $1,054.00 120 $1,330.00 195799 Wheel Assembly $3,612.00 625 $4,976.00 802881 CratedMotor $5,856.00 825 $7,802.00 1138

PRICES SUBJECT TO CHANGEWITHOUT NOTICE1

2

AERMOTORWINDMILLAERMOTOR REPLACEMENT PARTS

Part No. Description (X) (A) (6) (D) (E) (F). 6 foot 8 foot 10 foot 12 foot 14 foot 16 foot

28 Vane Spring $ 21.00 $ 26.00 $ 48.00 $ 84.00 $ 138.00 $ 190.00

31 Vane Less #44 and #46 219.00 258.00 364.00 592.00 740.00 1094.00

34 Outer Band of Wheel 25.00 34.00 70.00 104.00 204.00 266.00

35 Inner Band of Wheel 11.00 21.00 32.00 55.00 75.00 112.00

44 Narrow U-Bolt w/Hardware 11.00 13.00 13.00 16.00 18.00 29.00

46 Wide U-Bolt w/Hardware 11.00 13.00 13.00 18.00 26.00 44.00

51 Wood Pump Pole 14' Long You May Purchase Locally ( Sizes Available upon Request)

62 Connection Pump Pole 24.00 24.00 31.00 41.00 57.00 90.00

82 Set of Pump Pole Straps 24.00 24.00 30.00 38.00 53.00 64.00

100 Sail-Complete w/sail tie 29.00 36.00 65.00 85.00 120.00 164.00

101 Sail Rib 7.00 9.00 12.00 17.00 21.00 31.00

171 Pump Rod Complete 57.00 60.00 82.00 145.00 262.00 432.00

2431/2 Furl Handle Assembly w/#334 45.00 45.00 64.00 90.00 96.00 142.00

334 V-Bolt f/Furl Handle Connection 9.00 10.00 12.00 1'4.00 16.00 16.00

507 Oil Ring 9.00 10.00 11.00 14.00 15.00 17.00

508 Pitman Guide Complete 45.00 56.00 70.00 154.00 286.00 326.00

508R Pitman Guide Rivet 1.00 3.00 4.00 5.00 6.00 7.00

510 Pivot Bolt for Tailbone 22.00 25.00 40.00 63.00 92.00 130.00

517 Spring f/Spout Washer 3.00 3.00 5.00 6.00 7.00 8.00

520 Oil Collector 12.00 13.00 16.00 18.00 28.00 38.00

521 Split Washer 10.00 11.00 13.00 15.00 20.00 23.00

522 Shaft f/Guide Wheel & Yoke 14.00 22.00 31.00 42.00 81.00 120.00

523 Guide Wheel 32.00 39.00 50.00 82.00 118.00 157.00

527 Furl Link w/Cotter Pin 9.00 10.00 15.00 17.00 24.00 29.00

528 Furl Arms w/Cotter Pins (Pair) 25.00 33.00 40.00 65.00 76.00 95.00

5281/2 Furl Arms (pair) Long for Repair 26.00 34.00 42.00 66.00 79.00 98.00

5283/4 Furl Arms (pair) X-Long f/Repair NA 36.00 44.00 68.00 81.00 100.00

560 Helmet w/Hardware 169.00 185.00 213.00 288.00 485.00 556.00

565 Nut for 588 5.00 5.00 5.00 6.00 6.00 7.00

576 Steel Washer for Turntable 1.00 3.00 5.00 7.00 9.00 10.00

578 Locknut t/Iop of Mastpipe 10.00 15.00 24.00 35.00 48.00 56.00

579 Lockwasher f/Top of Mastpipe 4.00 5.00 7.00 8.00 9.00 11.00

580 Vane Spring Holder 10.00 14.00 17.00 31.00 34.00 38.00

582 Furl Wire (You May Purchase Locally)

585 Tailbone Casting 39.00 46.00 82.00 95.00 129.00 163.00

588 Stud for Pitman Guide 5.00 5.00 5.00 8.00 9.00 11.00

608 Pump Rod Yoke w/Cotter Pin 53.00 57.00 63.00 121.00 169.00 250.00

609S Furl Lever Complete (4-Post) 97.00 120.00 170.00 226.00 376.00 456.00

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

--- -------------

Part No. Description (X) (A) (8) (D) (E) (F). 6 foot 8 foot 10 foot 12 foot 14 foot 16 foot

610 Pin for Yoke $ 6.00 $ 7.00 $ 9.00 $ 10.00 $ 12.00 $ 16.00

613 1/2 Upper Furl Ring (w/o Arms) 82.00 88.00 101.00 151.00 229.00 330.00

614S Lower Furl Ring (4 Post Split) 39.00 42.00 63.00 81.00 101.00 124.00

622 Bolt w/Cotter Pin 6.00 7.00 9.00 12.00 14.00 15.00

639 Tailbone Assembly w/#51 0 116.00 149.00 240.00 396.00 698.00 779.00

659 Buffer Device Complete 77.00 85.00 159.00 187.00 266.00 343.00

661 1/2 Pipe and Base Assembly 268.00 295.00 374.00 522.00 904.00 1192.00

674 Pipe Base Only (4 Post) 68.00 68.00 90.00 125.00 203.00 288.00

686 Pitman Arm 34.00 42.00 94.00 108.00 209.00 283.00

690 Brake Band 30.00 39.00 54.00 81.00 135.00 175.00

703 Hub and Shaft Assembly 356.00 372.00 469.00 955.00 1410.00 1894.00

704 Pinion Gear 54.00 62.00 102.00 134.00 175.00 262.00

705 Large Gear 152.00 164.00 262.00 448.00 484.00 665.00

708 Pinion Gear Bearing Babbit 31.00 44.00 80.00 123.00 165.00 266.00

711 Oil Socket f/520 (Model 702) 8.00 9.00 11.00 17.00 25.00 26.00

718 Spout Washer 14.00 16.00 18.00 24.00 35.00 41.00

720 Shaft for 752 w/ (2) 721 pins 18.00 28.00 50.00 69.00 110.00 174.00

721 Pin for 720 Shaft 5.00 5.00 6.00 9.00 10.00 11.00

729 Pin for Hub Shaft 2.00 3.00 4.00 5.00 6.00 7.00

730 Sleeve Bearing (Babbit) 48.00 . 70.00 119.00 156.00 273.00 414.00

736 Wheel Arm w/nuts & washers 28.00 35.00 42.00 58.00 108.00 134.00

744 Key for 704 6.00 7.00 9.00 15.00 18.00 20.00

751 Bearing Bar 14.00 21.00 24.00 34.00 56.00 84.00

752 Bearing f/Large Gear (Babbit) 48.00 66.00 104.00 172.00 255.00 318.00

755 Large Gear Assembly 372.00 398.00 678.00 1130.00 1320.00 1758.00

781 Countersunk Plug 4.00 4.00 5.00 8.00 10.00 10.00

786 Brake Lever 34.00 41.00 60.00 84.00 148.00 188.00

802 Main Frame 800.00 882.00 1175.00 2052.00 3480.00 4980.00

806 Key for Pinion Gear 5.00 6.00 6.00 15.00 16.00 17.00

808 Pinion Gear Brg. (Garlock) 44.00 60.00 87.00 176.00 230.00 321.00

830 Sleeve Bearing (Garlock) 121.00 135.00 208.00 264.00 379.00 870.00

852 Bearing f/Large Gear (Garlock) 54.00 80.00 108.00 187.00 252.00 314.00

855 Large Gear Assy. 375.00 436.00 682.00 1145.00 1339.00 1817.00

AERMOTORWINDMILLAERMOTOR REPLACEMENT PARTS

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

3

736----1~~!W\

35 --~...I)l"

100----."'---'"17

35

Oiling PlatformWidespread Towers OnlyBASIC TOWER PARTS

•1 r LoopStep

Corner Posto = 0o = 0

Round Brace•Angle Brace - Top Right

I- I i >c,, I

Angle Brace - Top Left

Angle Brace - Bottom Right

cw

Angle Brace - Bottom Left

~. •-Top Corner Post

4

•Clamp

tlPlatform

Bolt

• Platform

•• J

•

• ••• u,

..)••Girt

580------

28---

639~510~ ~

702or

80231

528

585~786\1-.,\

6131/2

609 (4 POST

GEAR BOX (BASIC MOTOR)

BRAKE, FURL &SUPPORT SYSTE~

·661'1>

Parts for Model 802 introduced in1981. Model 802 Parts are inter-changable with Model 702 Parts.

Note:Large Gears (705) and Pinion Gears(704) should be Purchased andInstalled in Matched Pairs Only.

~L---_686

610

1 71

578579

~~~~~~-----705

~._--704

j

703

5

AERMOTOR - 4 Post Steel TowersTowers (Includes Stub Towers, Platforms and Anchor Posts)

Size 6 Feet or 8 Feet 10 FeetAngle Size 2x2x3/16 2 112x2 112x3/16Twr, Height

(Feet I Price Weight Price Weight_1 $2,196.00 445 $2,510.00 50917 $4,860.00 500 $3,360.00 53933 $3,100.00 660 $3,540.00 730.ro $3,750.00 775 $4,200.00 86047 $4,275.00 930 $4,930.00 995

[Stze 12 Feet 14 Feet 16 FeetAngle Size 2 1/2x2 l/2x3/16 3x3x3/16 3x3xl/4Twr, Height Price Weight Price Weight Price Weight

27 $3,970.00 780 $4,040.00 900 $6,040.0033 $4,150.00 963 $4,710.00 1090 $6,250.00 1420.ro $4,930.00 1140 $5,150.00 1300 $7,075.00 178047 $5,760.00 1440 $7,240.00 1590 $8,720.00 2210

Aermotor re erves the right to subsitute Steel of appropriate size.do not include the 51,82, or Pole Guides.

STUB TOWERSI Stub Height 6 feet or 8 feet 10 feet 12 Feet 14 Feet 16 Feet

(Feet) Price Weight Price Weight Price Weight Price Weight Price Weight3 $208.00 36 $240.00 45-+ $430.00 38 $450.00 90 $470.00 955 520.00 111 $7 $560.00 120 $595.00 140 $825.00 180 $882.00 195 $1330.00 27514 $1360.00 280

:: 51 b Tower Do Not Have Platforms 7' Stub Towers for 6',8', or 10' Mills include Regular Platform- Towers for 6' or 8' Mills include Reg. Platform 7' Stub Towers for 12', 14' or 16' Mills include Reg. & Oiling Platforms- b Tower for 12' or 14; Mills include Oiling Platform, b Towers for 10' Mills include Regular Platform-

Aennotor Windmill Oil_-ot se More Description Price Weight

Than the Quantities Below: 1- Quart Cans $7.00 3_ ermotor 1-Qt. 12' Aermotor I-Gal. Case $82.00 36and 10' 2-Qts. 14' and 16' 2-Gal. 5 Gal. Container $80.00 62

- : The proper amount of Aermotor Windmill Oil is included with windmill or windmill motor to assure proper lubricationlonger more efficient life for your Aermotor Windmill. Use only Aermotor Oil or equivalent. Other types may seriously

- ge your ermotor.

Hand Pumps and Sucker RodsDescription (Hand Pumps) Price Description (Sucker Rods) PriceHD $810.00 7/16 Steel Rod $4.00 per ft.i '-'8 \\llite Ash Wood Sucker Rod $3.00 per ft. 7/16x7/16 Coupling $3.00 ea.

21' 5/8" Fiberglass Sucker Rod $3.50 per ft.Rubber Rod Guides (Call For Prices)

:: 'S Fiberglas Repair Kit $20.00 ea. 3/4 Fiberglass Repair Kits $22.00 ea.6

I

AERMOTORAnchor Posts, Platforms, Tower Clamps

PLATFORMSMill Size Part No. Wood Platform Galvanized Steel Oil Platform Steel6 or 8 TI49 $190.00 149G $356.00 ,

10 TI51 $205.00 151G $424.0012 T249 $214.00 249G $430.00 T2491/2 $130.00 $250.0014 T279 $230.00 279G $484.00 T382 $130.00 $250.0016 T749 $510.00 $546.00 T383 $130.00 $250.00Platform Bolts 8 Thru 14 TI48 $ 5.00Platform Bolts for 16' T748 $ 17.00

SET OF 4 ANCHOR POSTS and FOURCROSS PIECES FOR RELOCATING4 POST TOWERS (Bolts Included)Mill Size 6',8', &10' 12' 14' 16'

Price Price Price Price$348.00- $430.00 $455.00 $670.00

... Extra Cross Pieces for Relocating TowersPart No.T-lI51/2 ea. $25.00T-214 ea.$28.00T-2153/4 ea.$30.00T-7151/4 ea.$44.00

TOWER CLAMPS, LOOP STEPSand PLATFORM BOLTS

Part No. Description PriceT-177 8' Tower Clamp $ 28.00T-1791/2 10' Tower Clamp $ 33.00T-277 12' Tower Clamp $ 42.00T-274 14' Tower Clamp $ 50.00T-777 16' Tower Clamp $ 64.00U-397 Loop Steps $ 22.00

PRICES ON LEATHERS, WELL CYLINDERS, SINKER BARS,ROD COUPLERS AND ADAPTERS AVAILABLE, CALL 800-854-1656

AERMOTOR WINDMILL MAINTENANCE SCHEDULE

An Aermotor Windmill that is correctly assembled and installed is virtuallymaintenance free!

(A) Check the windmill once every six months to be sure the windmill is runningcorrectly. This is just a visual check from the ground or from the car.

(B) Under normal conditions the mill requires a change of oil once a year. You shouldSAE 10 or less. The oil should be of the non-detergent type.

(C) Check to see if nuts and bolts have remained tight on mill and tower. Do thisat the same time you change oil, or after a major storm.

7

AERMOTORWINDMILL

All Aermotors should be well erected so they will be able torender the best service. To insure this, it is necessary for themill to have a good wind exposure. The load must be amoderate one. The windmill should have a clear windexposure of fifteen feet above obstructions within 400 feet ofthe mill. The size of the cylinder and pipe should correspondclosely to our recommendations listed below. Never use a1-inch down pipe for the well no matter how small the cylinder.

FOR BEST RESULTS, RELY ON YOURAUTHORIZED AERMOTOR DEALER

STRAINER

Selection of Cylinder ... open top cylinder is recommendedwhere it can be used. Inside diameter of the drop pipe is slightlylarger than inside diameter of cylinder. This permits lowering or

removal of plunder and check valve through drop pipe.

PIPE COUPLING JOCTAGON

WOOD ROD

_- WELL PIPE -

STEEL ROD-/

ROD COUP ING

wOOD ROD ORAIRTITl RO~

PRINCIPLE OFCYLINDER OPERATION

Pump fod of wood or stee!connects ptunqe 01 pumpto valves In cylinder andbrings about actualpumping action.TherE' IS a check " ••rve atbonom of cylinder and aSimilar valve in the plunger.Water flows into cylinderthrough check vefve whileplunger IS making Its up-strcke. On down stroke.water is held in cylinder bychp.ck valve and plungerdescends to bottom whilewater passes through valve10 plunger.On next up stroke. valve inplunger closes and waterabove II is raised up inlodrop pipe. AI same timecheck valve opens andcylinder IIlls wi!h wateragain. With each up strokeof the pump. the plungerforces a cylinder lull ofwater into drop pipe end out10 discharge tank.

- \

STEELSUBS TlTUT[S

A11'

Average Water Needs GallonsMilking COW, per day 35Dry cow or steer, per day 15Horse, per day 12Hog, per day 4Sheep, per day 2Chickens. (per 100) per day 6Bath tub, each filling 35Shower, each time used 25-60Lavatory, each time used 1-2Flush toilet, each filling 2-7Kitchen Sink, per day 20

Automatic washer, each filling 30-50Dishwasher 10-20Water Softner up to 1503/4 inch hose. per hour 300Other uses, per person. per day (avg.) 25

Pumps and cylinders usedwith the various sizes of millsshould be capable of giving aclear stroke equal in inches tothe diameter of the windwheelin feet: i.e., 8 inches for 8 foot,

10 inches for 10 foot, etc.

*Pumping Capacities of Aermotor Windmillsshown in the table below are approximate, basedon the mill set on the long stroke, operating in a15 to 20 mile-an-hour wind. The short stroke in-creases elevation by one-third and reducespumping capacities by one-fourth.

·Capacity Elevation in Feet to Which Water Can Be RaiseSize of per Hour,

Cylinder Gallons Size 01 Aermotor WindmillInches 6-Ft. ,8·16 Ft. 6-Ft. I 8-Ft. 10- Ft. 12- Ft. 14-Ft. 16-Ft.

1 7/8 125 180 120 175 260 390 560 9202 130 190 95 140 215 320 460 750

2 1/4 180 I 260 77 112 170 250 360 590,2 1/2 225 I 325 65 94 140 210 300 49023/4 265 385 56 80 120 180 260 425

3 320 470 47 I 68 100 155 220 3603 1/2 440 640 35 50 76 115 1160 26533/4 I 730 65 98 143 230

4 570 830 27 37 58 86 125 2005 900 1300 17 25 37 55 80 1306 i 1875 17 25 38 I 55 85

_.

8

What Makes Aermotor Windmills Superior?Aermotor Windmills are constructed with the highest of quality ofmetallurgy available.

A positive oiling system circulates oil to all moving parts. The oilonly needs to be changed once per year.

Parts for all Aermotor Windmills are available for next day shipmentthroughout the world.

All bearings are removable to be replaced easily.

All parts in Aermotor Windmills are built in the United States ofAmerica.

Because of American technology, Aermotor Windmill bearings and gearsfit tightly for little or no maintenance.

Aermotor Windmills have been manufactured since 1888. There arethousands of Aermotor Windmills, more than 100 years old still workingtoday.

The only maintenance need on Aermotor Windmills is to change the oilonce a year.

Highly efficient and large capacity Aermotor Windmills can pump asmuch as 1,000 gallons of water per hour.

All towers are constructed from the highest quality steel and arehot-dipped galvanized for years of outstanding resistance to nature'selements.

All water obtained with Aermotor Windmills is cost free because thepower is produced by the wind.

All Aermotor Windmills carry a seven-year warranty.

TERMS OF SALE:1. Invoices are due upon receipt: Past due after 30 days.

2. If any part of a customer's balance falls in the over 60-day column, all salesto them will be C.O.D. or cash in advance until their entire balance is cleared.

3. Unless otherwise approved by the sales manager, all items returned toAermotor for credit will be subject to a 30% restocking fee. All returns must bepre-approved by Aermotor.

4. All Texas businesses must have a current Texas resale tax exemption form,comolete with sianature.

DEALER:

Since 1888 - Still Made in the U.S.AAermotor Windmillshave served tirelesslywith quiet, clean,efficient power.

P R •••FREE AS ,.HE WINDWITH AERMOTOR WINDMILLS, YOU WILL HAVECHOSEN THE LOWEST COST PUMPING POWERON EARTH. THE AERMOTOR WINDMILL PUTS

THE WIND TO WORK, CONSERVING FUEL,MONEY AND VIRTUALLY NO MAINTENANCE.

...or call factory for information