AERMOTOR PUMPS AND WATER SYSTEMS U.S. 2014 …aermotor.com/pdf/Pricing/2013/A5817P_US_Aermotor_water_systems(1… · aermotor ® pumps and water systems u.s. 2014 list prices a5817p

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. WE RESERVE THE RIGHT TO CORRECT PRICING ERRORS.Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., LtdAll other brand or product names are trademarks or registered trademarks of Pentair.

AERMOTOR® PUMPS AND WATER SYSTEMS

U.S. 2014 LIST PRICESA5817P • EFFECTIVE: DECEMBER 1, 2013 • SUPERSEDES ALL PREVIOUS PRICE LISTS

Table of ContentsDescription Page4” SubMERSiblE PuMPS

“A+” and “S” Series, Pentek® Fitted 2-4

“T” Composite Series, Pentek Fitted 5-6Pump End Assemblies 7-8

MOTORS AND CONTROlSPentek 4” Submersible Motors 9Pentek Coal Bed Methane 4” Submersible Motors

10

Pentek 4” Submersible Control Boxes 11Pentek Controls & Accessories 12Pentek Intellikit™ 13Pentek 6” Submersible Motors 14Hitachi® Submersible Motors 15-16

Description PageJET PuMPS 17

Accessories 18TANKS

Pressurized Steel Water Tanks 19Composite / Fibrewound Tanks 20Galvanized Water Tanks 21

AbOVE-GROuND PuMPSCentrifugal Pumps 22-23High Pressure Booster Pumps 24

REPlACEMENT MOTORS 25TERMS Of AGREEMENT 26-27

2 A5817P (11/01/13)

4” SUBMERSIBLE PUMPS

Aermotor® “A+” and “S” Stainless Steel Series with Pentek® XE Series Motors

For a complete listing of control boxes, see Page 11.

for XE SERiES REPlACEMENT MOTOR lEADS, see Page 10.

HP STAGES PH VOlTS

ASSEMblED PuMP PuMP END MOTOR MOTOR CONTROl

CATAlOG NuMbERliST

PRiCEWT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

5 GPM / 2 WiRE

A+

1/2 13 1 115 AA+550-115-2W-P4 $1,136 28 88597-00SS $640 14 P42b0005A1-C $461 191/2 13 1 230 AA+550-230-2W-P4 1,136 28 88597-00SS 640 14 P42b0005A2-C 461 193/4 19 1 230 AA+575-230-2W-P4 1,386 37 88660-00SS 786 13 P42b0007A2-C 556 231 22 1 230 AA+5100-230-2W-P4 1,628 37 88598-00SS 985 15 P42b0010A2-C 597 25

1-1/2 29 1 230 AA+5150-230-2W-P4 1,990 48 88599-00SS 1,158 19 P42b0015A2-C 776 29

S-Se

ries 1/2 13 1 230 AS550-230-2W-P4 1,087 27 88597 591 13 P42b0005A2-C 461 19

3/4 19 1 230 AS575-230-2W-P4 1,372 37 88660 774 12 P42b0007A2-C 556 231 22 1 230 AS5100-230-2W-P4 1,579 43 88598 937 14 P42b0010A2-C 597 25

1-1/2 29 1 230 AS5150-230-2W-P4 1,963 47 88599 1,134 18 P42b0015A2-C 776 295 GPM / 3 WiRE

A+

1/2 13 1 115 AA+550-115-3W-P4 1,063 29 88597-00SS 640 14 P43b0005A1-C 397 19 SMC-iR0511 $81 41/2 13 1 230 AA+550-230-3W-P4 1,063 28 88597-00SS 640 14 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 19 1 230 AA+575-230-3W-P4 1,294 34 88660-00SS 786 13 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 22 1 230 AA+5100-230-3W-P4 1,520 38 88598-00SS 985 15 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 29 1 230 AA+5150-230-3W-P4 1,836 45 88599-00SS 1,158 19 P43b0015A2-C 637 27 SMC-CR1521 123 7

S-Se

ries

1/2 13 1 115 AS550-115-3W-P4 1011 2 88597 591 13 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 13 1 230 AS550-230-3W-P4 1011 27 88597 591 13 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 19 1 230 AS575-230-3W-P4 1,282 14 88660 774 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 22 1 230 AS5100-230-3W-P4 1,471 38 88598 937 14 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 29 1 230 AS5150-230-3W-P4 1,811 44 88599 1,134 18 P43b0015A2-C 637 27 SMC-CR1521 123 78 GPM / 2 WiRE

A+

1/2 10 1 115 AA+850-115-2W-P4 1,063 26 88604-00SS 562 10 P42b0005A1-C 461 191/2 10 1 230 AA+850-230-2W-P4 1,063 27 88604-00SS 562 10 P42b0005A2-C 461 193/4 13 1 230 AA+875-230-2W-P4 1,294 31 88605-00SS 744 11 P42b0007A2-C 556 231 16 1 230 AA+8100-230-2W-P4 1,520 34 88606-00SS 977 13 P42b0010A2-C 597 25

1-1/2 22 1 230 AA+8150-230-2W-P4 1,836 41 88607-00SS 1,099 15 P42b0015A2-C 776 29

S-Se

ries

1/2 10 1 115 AS850-115-2W-P4 1011 26 88604 520 9 P42b0005A1-C 461 191/2 10 1 230 AS850-230-2W-P4 1011 2 88604 520 9 P42b0005A2-C 461 193/4 13 1 230 AS875-230-2W-P4 1,282 27 88605 729 10 P42b0007A2-C 556 231 16 1 230 AS8100-230-2W-P4 1,471 33 88606 928 12 P42b0010A2-C 597 25


A+

1/2 10 1 115 AA+850-115-3W-P4 1031 27 88604-00SS 562 10 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 10 1 230 AA+850-230-3W-P4 1031 27 88604-00SS 562 10 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 13 1 230 AA+875-230-3W-P4 1,251 31 88605-00SS 744 11 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 16 1 230 AA+8100-230-3W-P4 1,512 33 88606-00SS 977 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *


S-Se

ries


1-1/2 22 1 230 AS8150-230-3W-P4 1,722 41 88607 1,050 14 P43b0015A2-C 637 27 SMC-CR1521 123 7

Capacitor Start, Capacitor Run Motor Controls (CSCR) - 1/2 to 1-1/2 HP

HP PHASE VOlTSCATAlOG NuMbER

liST PRiCE WT. lbS.

1/2 1 230 SMC-CR0521 $119 43/4 1 230 SMC-CR0721 122 41 1 230 SMC-CR1021 123 4

1-1/2 1 230 SMC-CR1521 123 4* Use a CSCR for quiet operation and improved operating efficiency. CSCR is offered as a standard product for 1-1/2 HP motor.

A5817P (11/01/13)3





HP STAGES PH VOlTS


CATAlOG NuMbERliST

PRiCEWT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

12 GPM / 2 WiRE

A+

1/2 8 1 115 AA+1250-115-2W-P4 $1,009 27 88592-00SS $517 10 P42b0005A1-C $461 191/2 8 1 230 AA+1250-230-2W-P4 1011 27 88592-00SS 517 10 P42b0005A2-C 461 193/4 11 1 230 AA+1275-230-2W-P4 1,223 30 88593-00SS 629 12 P42b0007A2-C 556 231 14 1 230 AA+12100-230-2W-P4 1,461 34 88594-00SS 825 13 P42b0010A2-C 597 25

S-Se

ries



A+

1/2 8 1 115 AA+1250-115-3W-P4 936 26 88592-00SS 517 10 P43b0005A1-C 397 19 SMC-iR0511 $81 41/2 8 1 230 AA+1250-230-3W-P4 938 25 88592-00SS 517 10 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 11 1 230 AA+1275-230-3W-P4 1,131 33 88593-00SS 629 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 14 1 230 AA+12100-230-3W-P4 1,352 34 88594-00SS 825 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *


S-Se

ries

1/2 8 1 115 AS1250-115-3W-P4 884 25 88592 469 9 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 8 1 230 AS1250-230-3W-P4 884 25 88592 469 9 P43b0005A2-C 397 18 SMC-iR0521 81 4 *1 11 1 230 AS1275-230-3W-P4 1,075 29 88593 576 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 14 1 230 AS12100-230-3W-P4 1,311 33 88594 784 12 P43b0010A2-C 498 25 SMC-iR1021 90 4 *

1-1/2 19 1 230 AS12150-230-3W-P4 1,718 42 88595 1,046 13 P43b0015A2-C 637 27 SMC-CR1521 123 716 GPM / 2 WiRE

A+

1/2 7 1 115 AA+1650-115-2W-P4 1009 27 89220-00SS 517 8 P42b0005A1-C 461 191/2 7 1 230 AA+1650-230-2W-P4 1009 25 89220-00SS 517 8 P42b0005A2-C 461 193/4 10 1 230 AA+1675-230-2W-P4 1,223 30 89221-00SS 629 12 P42b0007A2-C 556 231 12 1 230 AA+16100-230-2W-P4 1,461 32 89222-00SS 825 13 P42b0010A2-C 597 25

1-1/2 17 1 230 AA+16150-230-2W-P4 1,922 43 89219-00SS 1,092 14 P42b0015A2-C 776 29

S-Se

ries



A+

1/2 7 1 115 AA+1650-115-3W-P4 936 28 89220-00SS 517 8 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 7 1 230 AA+1650-230-3W-P4 936 26 89220-00SS 517 8 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 10 1 230 AA+1675-230-3W-P4 1,131 31 89221-00SS 629 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 12 1 230 AA+16100-230-3W-P4 1,352 34 89222-00SS 825 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *


S-Se

ries


1-1/2 17 1 230 AS16150-230-3W-P4 1,718 39 89219 1,046 13 P43b0015A2-C 637 27 SMC-CR1521 123 7



liST PRiCE WT. lbS.



4 A5817P (11/01/13)



HP STAGES PH VOlTS


CATAlOG NuMbERliST

PRiCEWT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

20 GPM / 2 WiRE

A+

3/4 9 1 230 AA+2075-230-2W-P4 $1,254 30 88615-00SS $660 10 P42b0007A2-C $556 231 11 1 230 AA+20100-230-2W-P4 1,412 34 88616-00SS 779 12 P42b0010A2-C 597 25

1-1/2 15 1 230 AA+20150-230-2W-P4 1,742 44 88617-00SS 922 14 P42b0015A2-C 776 29

S-Se

ries 3/4 9 1 230 AS2075-230-2W-P4 1,204 30 88615 611 9 P42b0007A2-C 556 23

1 11 1 230 AS20100-230-2W-P4 1,387 32 88616 755 10 P42b0010A2-C 597 251-1/2 15 1 230 AS20150-230-2W-P4 1,690 42 88617 873 13 P42b0015A2-C 776 2920 GPM / 3 WiRE

A+

3/4 9 1 230 AA+2075-230-3W-P4 1,163 32 88615-00SS 660 10 P43b0007A2-C 477 21 SMC-iR0721 $85 4 *1 11 1 230 AA+20100-230-3W-P4 1,304 36 88616-00SS 779 12 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 15 1 230 AA+20150-230-3W-P4 1,590 43 88617-00SS 922 14 P43b0015A2-C 637 27 SMC-CR1521 123 7

S-Se

ries 3/4 9 1 230 AS2075-230-3W-P4 1,112 13 88615 611 9 P43b0007A2-C 477 21 SMC-iR0721 85 4 *

1 11 1 230 AS20100-230-3W-P4 1,281 33 88616 755 10 P43b0010A2-C 498 23 SMC-iR1021 90 4 *1-1/2 15 1 230 AS20150-230-3W-P4 1,538 38 88617 873 13 P43b0015A2-C 637 27 SMC-CR1521 123 725 GPM / 2 WiRE

A+

3/4 6 1 230 AA+2575-230-2W-P4 1,206 28 88917-00SS 615 8 P42b0007A2-C 556 231 8 1 230 AA+25100-230-2W-P4 1,337 33 88918-00SS 707 9 P42b0010A2-C 597 25

1-1/2 11 1 230 AA+25150-230-2W-P4 1,611 47 88919-00SS 795 12 P42b0015A2-C 776 29

S-Se

ries 3/4 6 1 230 AS2575-230-2W-P4 1,158 28 88917 567 7 P42b0007A2-C 556 23

1 8 1 230 AS25100-230-2W-P4 1,288 33 88918 659 8 P42b0010A2-C 597 251-1/2 11 1 230 AS25150-230-2W-P4 1,562 42 88919 748 11 P42b0015A2-C 776 2925 GPM / 3 WiRE

A+

3/4 6 1 230 AA+2575-230-3W-P4 1,114 32 88917-00SS 615 8 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 8 1 230 AA+25100-230-3W-P4 1,229 33 88918-00SS 707 9 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 11 1 230 AA+25150-230-3W-P4 1,458 43 88919-00SS 795 12 P43b0015A2-C 637 27 SMC-CR1521 123 7

S-Se

ries 3/4 6 1 230 AS2575-230-3W-P4 1,066 29 88917 567 7 P43b0007A2-C 477 21 SMC-iR0721 85 4 *

1 8 1 230 AS25100-230-3W-P4 1,180 33 88918 659 8 P43b0010A2-C 498 23 SMC-iR1021 90 4 *1-1/2 11 1 230 AS25150-230-3W-P4 1,410 39 88919 748 11 P43b0015A2-C 637 27 SMC-CR1521 123 7





liST PRiCE WT. lbS.



A5817P (11/01/13)5


Aermotor® “T” Composite Series with Pentek® XE Series Motors



HP STAGES PH VOlTS


CATAlOG NuMbERliST

PRiCEWT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

5 GPM / 2 WiRE1/2 13 1 115 AT550-115-2W-P4 $1,011 26 88823 519 14 P42b0005A1-C 461 191/2 13 1 230 AT550-230-2W-P4 1,011 26 88823 519 13 P42b0005A2-C 461 193/4 19 1 230 AT575-230-2W-P4 1,268 32 88824 673 12 P42b0007A2-C 556 231 22 1 230 AT5100-230-2W-P4 1,504 35 88825 867 14 P42b0010A2-C 597 25

1-1/2 29 1 230 AT5150-230-2W-P4 1,893 50 89038 1,064 18 P42b0015A2-C 776 295 GPM / 3 WiRE1/2 13 1 115 AT550-115-3W-P4 938 26 88823 519 14 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 13 1 230 AT550-230-3W-P4 938 26 88823 519 13 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 19 1 230 AT575-230-3W-P4 1,176 31 88824 673 13 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 22 1 230 AT5100-230-3W-P4 1,396 36 88825 867 14 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 29 1 230 AT5150-230-3W-P4 1,739 42 89038 1,064 19 P43b0015A2-C 637 27 SMC-CR1521 123 8 GPM / 2 WiRE1/2 10 1 115 AT850-115-2W-P4 979 25 88827 488 10 P42b0005A1-C 461 191/2 10 1 230 AT850-230-2W-P4 979 25 88827 488 9 P42b0005A2-C 461 193/4 13 1 230 AT875-230-2W-P4 1,246 29 88828 653 11 P42b0007A2-C 556 231 16 1 230 AT8100-230-2W-P4 1,495 33 88829 858 13 P42b0010A2-C 597 25

1-1/2 22 1 230 AT8150-230-2W-P4 1,805 46 89040 980 15 P42b0015A2-C 776 298 GPM / 3 WiRE1/2 10 1 115 AT850-115-3W-P4 907 25 88827 488 10 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 10 1 230 AT850-230-3W-P4 907 25 88827 488 9 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 13 1 230 AT875-230-3W-P4 1,155 29 88828 653 11 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 16 1 230 AT8100-230-3W-P4 1,387 33 88829 858 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 22 1 230 AT8150-230-3W-P4 1,652 39 89040 980 14 P43b0015A2-C 637 27 SMC-CR1521 123 12 GPM / 2 WiRE1/2 8 1 115 AT1250-115-2W-P4 884 23 88831 397 10 P42b0005A1-C 461 191/2 8 1 230 AT1250-230-2W-P4 884 23 88831 397 9 P42b0005A2-C 461 193/4 11 1 230 AT1275-230-2W-P4 1,103 28 88832 515 12 P42b0007A2-C 556 231 14 1 230 AT12100-230-2W-P4 1,336 32 88833 706 13 P42b0010A2-C 597 25

1-1/2 19 1 230 AT12150-230-2W-P4 1,799 49 88798 974 13 P42b0015A2-C 776 2912 GPM / 3 WiRE1/2 8 1 115 AT1250-115-3W-P4 812 24 88831 397 10 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 8 1 230 AT1250-230-3W-P4 812 24 88831 397 9 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 11 1 230 AT1275-230-3W-P4 1,011 28 88832 515 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 14 1 230 AT12100-230-3W-P4 1,228 32 88833 706 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 19 1 230 AT12150-230-3W-P4 1,646 37 88798 974 14 P43b0015A2-C 637 27 SMC-CR1521 123 7



liST PRiCE WT. lbS.



6 A5817P (11/01/13)


Aermotor® “T” Composite Series with Pentek® XE Series Motors

HP STAGES PH VOlTS


CATAlOG NuMbERliST

PRiCEWT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

16 GPM / 2 WiRE1/2 7 1 115 AT1650-115-2W-P4 883 23 89224 396 7 P42b0005A1-C 461 191/2 7 1 230 AT1650-230-2W-P4 883 23 89224 396 7 P42b0005A2-C 461 193/4 10 1 230 AT1675-230-2W-P4 1,103 28 89225 515 11 P42b0007A2-C 556 231 12 1 230 AT16100-230-2W-P4 1,336 32 89226 706 12 P42b0010A2-C 597 25

1-1/2 17 1 230 AT16150-230-2W-P4 1,800 49 89227 975 13 P42b0015A2-C 776 2916 GPM / 3 WiRE 1/2 7 1 115 AT1650-115-3W-P4 810 24 89224 396 7 P43b0005A1-C 397 19 SMC-iR0511 81 41/2 7 1 230 AT1650-230-3W-P4 810 24 89224 396 7 P43b0005A2-C 397 18 SMC-iR0521 81 4 *3/4 10 1 230 AT1675-230-3W-P4 1,011 28 89225 515 12 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 12 1 230 AT16100-230-3W-P4 1,228 32 89226 706 13 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 17 1 230 AT16150-230-3W-P4 1,647 37 89227 975 14 P43b0015A2-C 637 27 SMC-CR1521 123 720 GPM / 2 WiRE3/4 9 1 230 AT2075-230-2W-P4 1,134 28 88834 545 9 P42b0007A2-C 556 231 11 1 230 AT20100-230-2W-P4 1,290 32 88835 661 12 P42b0010A2-C 597 25

1-1/2 15 1 230 AT20150-230-2W-P4 1,617 46 88799 801 14 P42b0015A2-C 776 2920 GPM / 3 WiRE3/4 9 1 230 AT2075-230-3W-P4 1,043 27 88834 545 9 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 11 1 230 AT20100-230-3W-P4 1,183 31 88835 661 10 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 15 1 230 AT20150-230-3W-P4 1,465 38 88799 801 13 P43b0015A2-C 637 27 SMC-CR1521 123 725 GPM / 2 WiRE3/4 6 1 230 AT2575-230-2W-P4 1,089 24 88984 501 8 P42b0007A2-C 556 231 8 1 230 AT25100-230-2W-P4 1,211 27 88985 586 9 P42b0010A2-C 597 25

1-1/2 11 1 230 AT25150-230-2W-P4 1,486 46 88986 676 11 P42b0015A2-C 776 2925 GPM / 3 WiRE3/4 6 1 230 AT2575-230-3W-P4 997 24 88984 501 7 P43b0007A2-C 477 21 SMC-iR0721 85 4 *1 8 1 230 AT25100-230-3W-P4 1,103 26 88985 586 9 P43b0010A2-C 498 23 SMC-iR1021 90 4 *

1-1/2 11 1 230 AT25150-230-3W-P4 1,334 38 88986 676 12 P43b0015A2-C 637 27 SMC-CR1521 123 7





liST PRiCE WT. lbS.



A5817P (11/01/13)7


Aermotor® Pump End Assemblies

HP GPM STAGES

“S” SERiES – iNTERNAl CHECK VAlVE A+ SERiES – EXTERNAl CHECK VAlVECATAlOG NuMbER

liST PRiCE WT. lbS.

CATAlOG NuMbER

liST PRiCE WT. lbS.

1/2

5 13 88597 $591 13 88597-00SS $640 148 10 88604 520 9 88604-00SS 562 10

12 8 88592 469 7 88592-00SS 517 816 7 89220 469 7 89220-00SS 517 8

3/4

5 19 88660 774 12 88660-00SS 786 138 13 88605 729 10 88605-00SS 744 11

12 11 88593 576 11 88593-00SS 629 1216 10 89221 576 11 89221-00SS 629 1220 9 88615 611 9 88615-00SS 660 1025 6 88917 567 7 88917-00SS 615 8

1

5 22 88598 937 14 88598-00SS 985 158 16 88606 928 12 88606-00SS 977 13

12 14 88594 784 12 88594-00SS 825 1316 12 89222 776 12 89222-00SS 825 1320 11 88616 755 10 88616-00SS 779 1125 8 88918 659 8 88918-00SS 707 935 4 88903-NCSS 593 14

1-1/2

5 29 88599 1,134 18 88599-00SS 1,158 198 22 88607 1,050 14 88607-00SS 1,099 15

12 19 88595 1,046 13 88595-00SS 1,091 1416 17 89219 1,046 13 89219-00SS 1,092 1420 15 88617 873 13 88617-00SS 922 1425 11 88919 748 11 88919-00SS 795 1235 7 88904-NCSS 754 1550 5 88908-NCSS 966 14

2

8 28 88608 1,149 16 88608-00SS 1,199 1712 21 88612 1,058 15 88612-00SS 1,107 1616 22 89214 871 15 89214-00SS 920 1620 19 88618 915 15 88618-00SS 965 1625 14 88920 792 13 88920-00SS 843 1435 9 89125-NCSS 937 1850 6 88909-NCSS 1,189 1575 5 89116-NCSS 1,237 1590 5 A+90SS-200 1,098 15

3

8 34 88609 1,621 16 88609-00SS 1,673 1712 28 88613 1,460 16 88613-00SS 1,511 1716 28 89215 1,144 16 89215-00SS 1,196 1720 24 88619 1,146 20 88619-00SS 1,197 2125 19 88921 1,013 16 88921-00SS 1,060 1735 11 89127-NCSS 1,240 2350 9 88910-NCSS 1,415 1375 7 89117-NCSS 1,309 1190 7 A+90SS-300 1,304 17

“S” Stainless Steel SuPER SubS With Internal Poppet

A+ Stainless Steel SuPER SubS5 GPM – 25 GPM with External Check Valve35 GPM – 90 GPM without Check Valve

8 A5817P (11/01/13)


Aermotor® Pump End Assemblies

Aermotor Thermax Series

HP GPM STAGES

“S” SERiES – iNTERNAl CHECK VAlVE A+ SERiES – EXTERNAl CHECK VAlVECATAlOG NuMbER

liST PRiCE WT. lbS.

CATAlOG NuMbER

liST PRiCE WT. lbS.

5

12 42 88718 $1,928 30 88718-00SS $1,977 3116 49 89216 2,235 35 89216-00SS 2,281 3620 34 88620 1,428 24 88620-00SS 1,476 2525 31 88922 1,278 20 88922-00SS 1,327 2135 19 89129-NCSS 1,568 3150 15 88911-NCSS 1,862 1975 11 89118-NCSS 1,854 1590 12 A+90SS-500 1,676 19

7-1/250 22 88912-NCSS 2,309 3375 17 89119-NCSS 2,504 3290 19 A+90SS-750 2,457 22

10 90 23 A+90SS-1000 3,384 35

with internal Poppet

HP GPM STAGES

Thermax T SERiESCATAlOG NuMbER

liST PRiCE WT. lbS.

1/2

5 13 88823 $519 138 10 88827 488 9

12 8 88831 397 716 7 89224 396 7

3/4

5 19 88824 673 128 13 88828 653 10

12 11 88832 515 1116 10 89225 515 1120 9 88834 545 925 6 88984 501 7

1

5 22 88825 867 148 16 88829 858 12

12 14 88833 706 1216 12 89226 706 1220 11 88835 661 1025 8 88985 586 8

1-1/2

5 29 89038 1,064 188 22 89040 980 14

12 19 88798 974 1316 17 89227 975 1320 15 88799 801 1325 11 88986 676 11

2 20 19 89045 817 1525 14 89025 699 13

A5817P (11/01/13)9

MOTORS AND CONTROLS

Pentek® XE Series 4” Submersible Motors

Two Wire (1-1/2 HP and below models utilize a 48” lead. 2 HP and above models utilize a 100” lead)

HP PHASE VOlTS CATAlOG NuMbERliST

PRiCE SHiP WT. QuANTiTY1/2 1 115 P42b0005A1-C $461 19 11/2 1 230 P42b0005A2-C 461 19 13/4 1 230 P42b0007A2-C 556 23 11 1 230 P42b0010A2-C 597 25 1

1-1/2 1 230 P42b0015A2-C 776 29 11/2 1 115 P42b0005A1-40PK 18,046 768 401/2 1 230 P42b0005A2-40PK 18,046 768 403/4 1 230 P42b0007A2-40PK 21,874 908 401 1 230 P42b0010A2-40PK 23,352 980 40

1-1/2 1 230 P42b0015A2-40PK 30,658 1156 40Three Wire (1-1/2 HP and below models utilize a 48” lead. 2 HP and above models utilize a 100” lead)

1/2 1 115 P43b0005A1-C $397 19 11/2 1 230 P43b0005A2-C 397 19 13/4 1 230 P43b0007A2-C 477 21 11 1 230 P43b0010A2-C 498 23 1

1-1/2 1 230 P43b0015A2-C 637 27 12 1 230 P43b0020A2-C 736 31 13 1 230 P43b0030A2-C 1,154 40 15 1 230 P43b0050A2-C 1,597 70 1

1/2 1 115 P43b0005A1-40PK 15,541 756 401/2 1 230 P43b0005A2-40PK 15,541 756 403/4 1 230 P43b0007A2-40PK 18,720 856 401 1 230 P43b0010A2-40PK 19,509 924 40

1-1/2 1 230 P43b0015A2-40PK 25,117 1096 403/4 3 200 P43b0007A8-C 507 23 11 3 200 P43b0010A8-C 507 23 11 3 230 P43b0010A3-C 507 23 11 3 460 P43b0010A4-C 507 23 1

1-1/2 3 200 P43b0015A8-C 572 24 11-1/2 3 230 P43b0015A3-C 572 24 11-1/2 3 460 P43b0015A4-C 572 24 11-1/2 3 575 P43b0015A5-C 572 24 1

2 3 200 P43b0020A8-C 637 28 12 3 230 P43b0020A3-C 637 28 12 3 460 P43b0020A4-C 637 28 12 3 575 P43b0020A5-C 637 28 13 3 200 P43b0030A8-C 921 32 13 3 230 P43b0030A3-C 921 32 13 3 460 P43b0030A4-C 921 32 13 3 575 P43b0030A5-C 921 32 15 3 200 P43b0050A8-C 1,440 55 15 3 230 P43b0050A3-C 1,440 55 15 3 460 P43b0050A4-C 1,440 55 15 3 575 P43b0050A5-C 1,440 55 1

7/1/2 3 200 P43b0075A8-C 1,784 70 17-1/2 3 230 P43b0075A3-C 1,784 70 17-1/2 3 460 P43b0075A4-C 1,784 70 17-1/2 3 575 P43b0075A5-C 1,784 70 1

10 3 460 P43b0100A4-C 2,733 70 1

10 A5817P (11/01/13)

MOTORS AND CONTROLS

Pentek® XE Series 4” Submersible Motors

for coal bed methane and sand handling applications


PRiCE SHiP WT.2 1 230 P43S0020A2-C $1,238 473 1 230 P43S0030A2-C 1,856 533 3 230 P43S0030A3-C 1,449 473 3 460 P43S0030A4-C 1,449 475 1 230 P43S0050A2-C 1,960 745 3 230 P43S0050A3-C 1,766 595 3 460 P43S0050A4-C 1,766 59

7.5 3 230 P43S0075A3-C 2,159 747.5 3 460 P43S0075A4-C 2,159 7410 3 460 P43S0100A4-C 3,237 80

Pentek® XE Series Replacement Motor Leads (for XE Motors only)CATAlOG NuMbER DESCRiPTiON

MAX HP liST PRiCE115V-1Ø 230V-1Ø 200V-3Ø 230V-3Ø 460V-3Ø 575V-3Ø

P18-1485K XE Motor Series Lead, 2W, 48IN, 14 AWG, XLPE 0.5 1.5 NA NA NA NA $46P18-1486K XE Motor Series Lead, 3W, 48IN, 14 AWG, XLPE 0.5 7.5 NA NA NA NA 46P18-1490K Pentek, 2W, 10FT, 16 AWG, SJOW LEAD 0.5 1.5 NA NA NA NA 194P18-1488K Pentek, 2W, 10FT, 16 AWG, SOOW LEAD 0.5 1.5 NA NA NA NA 97P18-1487K Pentek, 2W, 20FT, 16 AWG, SOOW LEAD 0.5 1.5 NA NA NA NA 168P18-1628K Pentek, 2W, 30 FT, 16 AWG, SOOW 0.5 1.5 NA NA NA NA 268P18-1629K Pentek, 2W, 50 FT, 16 AWG, SOOW 0.5 1.5 NA NA NA NA 263P18-1630K Pentek, 2W, 100 FT, 16 AWG, SOOW 0.5 1.5 NA NA NA NA 462P18-1631K Pentek, 3W, 10 FT, 16 AWG, SOW 0.5 5.0 7.5 7.5 7.5 7.5 99P18-1632K Pentek, 3W, 20 FT, 16 AWG, SOW 0.5 5.0 7.5 7.5 7.5 7.5 144P18-1633K Pentek, 3W, 30 FT, 16 AWG, SOW 0.5 5.0 7.5 7.5 7.5 7.5 187P18-1634K Pentek, 3W, 50 FT, 16 AWG, SOW 0.5 5.0 7.5 7.5 7.5 7.5 273P18-1635K Pentek, 3W, 100 FT, 16 AWG, SOW 0.5 3.0 3.0 5.0 7.5 7.5 480P18-1651K Cord kit, XE Series, 2W, 100”, STD, 14 AWG 0.5 1.5 NA NA NA NA 51P18-1652K Cord kit, XE Series, 3W, 100”, STD, 14 AWG 0.5 5.0 7.5 7.5 7.5 7.5 67

A5817P (11/01/13)11

MOTORS AND CONTROLS

Pentek® XE Series 4” Submersible Control Boxes –SMC (See chart below for motor compatability)

Capacitor Start / induction Run (CSiR) Motor Controls (NEMA 3R)


liST PRiCE SHiP WT. QuANTiTY

1/2 1 115 SMC-iR0511 $81 4 11/2 1 230 SMC-iR0521 81 4 13/4 1 230 SMC-iR0721 85 4 11 1 230 SMC-iR1021 90 4 1

1/2 1 115 SMC-iR0511-6PK 466 24 61/2 1 230 SMC-iR0521-6PK 466 24 63/4 1 230 SMC-iR0721-6PK 491 24 61 1 230 SMC-iR1021-6PK 507 24 6

Capacitor Start / Capacitor Run (CSCR) Motor Controls (NEMA 3R)*1/2 1 230 SMC-CR0521 $119 5 13/4 1 230 SMC-CR0721 122 5 11 1 230 SMC-CR1021 123 5 1

1-1/2 1 230 SMC-CR1521 123 7 12 1 230 SMC-CR2021 204 7 13 1 230 SMC-CR3021 252 7 15 1 230 SMC-CR5021 365 8 1

1/2 1 230 SMC-CR0521-6PK 678 30 63/4 1 230 SMC-CR0721-6PK 704 30 61 1 230 SMC-CR1021-6PK 712 30 6

*Use a CSCR for quiet operation and improved operating efficiency.

Capacitor Start / Capacitor Run +Plus (Mag. Contactor) NEMA 3R2 1 230 SMC-CRP2021 $286 7 13 1 230 SMC-CRP3021 321 8 15 1 230 SMC-CRP5021 412 12 1

NOTE: Hitachi® single phase motors must use a Hitachi control box. Use of any other control box will void the warranty.

Submersible Motor Control Compatability

Motor Type Submersible Motor Control Type

Pentek SMC franklin Electric®

Pentek XE Series Yes YesFranklin Electric Yes Yes


Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., LtdFranklin Electric® is a registered trademark of Franklin Electric Co., Inc.All other brand or product names are trademarks or registered trademarks of Pentair.

12 A5817P (11/01/13)

MOTORS AND CONTROLS

Pentek® Single Phase Pump Protector Series – SPP

Pentek Intellidrive™ Constant Pressure Pump Controller


liST PRiCE SHiP WT. QuANTiTY

1/3 – 1 1 115 SPP-111P-3Rl $217 1.6 11/2 – 1 1 230 SPP-231P 217 0.8 1

1/2 – 1-1/2 1 230 SPP-233P-1.5 270 1.6 11/2 – 3 1 230 SPP-233P 380 1.6 1

5 & 7-1/2 1 230 SPP-235P-75 573 2 110 1 230 SPP-235P-100 573 2 115 1 230 SPP-235P-150 573 2 1

SPP-iNfORMER 352 1 11/3 – 1/2 1 115 SPP-111P 174 0.8 1

Pentek SPPs are compatible with Franklin Electric® or Pentek 4” single-phase motors.For a complete line of Variable Speed Drive products, see Pentek price list P8062WS.

1-Phase input / 1-Phase Output

MODEl NuMbER MOTOR TYPE MAXiMuM HP iNPuT VOlTAGE

MAXiMuM OuTPuT AMPS* ENClOSuRE TYPE

liST PRiCE

PiD102-Wire * 1-Phase

1 HP

190V - 265V

9.5A

Nema3R outdoor

$1,345 3-Wire * 1-Phase 7.5A3-Wire * 3-Phase 5.0A

PiD202-Wire * 1-Phase 1-1/2 HP 11.0A

1,6403-Wire * 1-Phase 2 HP 13.5A3-Wire * 3-Phase 2 HP 8.5A

PiD50 3-Wire * 3-Phase 5 HP 18.0A 2,327* Note: Select drives by S.F amps of pump motor. All models have an approximate shipping weight of 22 lbs. All models have approx. carton dimensions of 22.3”L x 9.4” W x 10.4” H (566mm x 237mm x 263mm)

A5817P (11/01/13)13

MOTORS AND CONTROLS

Pentek Intellikit™ Includes pump, motor and drive

Order Numberflow

Series HP

Shut-Off Head

At Rated flow at Max Runout

Pump Drive Motor list PriceTDH (ft) TDH (ft)

flow (GPM)

TDH (ft)

60Hz NEMA 3 KitsA5PiK10-60 5 1HP 620 450 7 250 88598-00SS PID10 P43B0010A3-C $2,211A5PiK15-60 5 1.5HP 780 580 7 330 88599-00SS PID20 P43B0015A3-C 2,413A8PiK10-60 8 1HP 465 320 11 210 88606-00SS PID10 P43B0010A3-C 2,211A8PiK15-60 8 1.5HP 655 415 11 300 88607-00SS PID20 P43B0015A3-C 2,413A8PiK20-60 8 2HP 833 528 11 380 88608-00SS PID20 P43B0020A3-C 2,619A8PiK30-60 8 3HP 1012 642 11 460 88609-00SS PID50 P43B0030A3-C 3,592

A12PiK10-60 12 1HP 450 275 15 200 88594-00SS PID10 P43B0010A3-C 2,211A12PiK15-60 12 1.5HP 587 308 15 250 88595-00SS PID20 P43B0015A3-C 2,413A12PiK20-60 12 2HP 648 340 15 280 88612-00SS PID20 P43B0020A3-C 2,619A12PiK30-60 12 3HP 864 453 15 380 88613-00SS PID50 P43B0030A3-C 3,592A16PiK10-60 16 1HP 280 175 20 130 89222-00SS PID10 P43B0010A3-C 2,211A16PiK15-60 16 1.5HP 418 275 20 175 89219-00SS PID20 P43B0015A3-C 2,413A16PiK20-60 16 2HP 541 366 20 220 89214-00SS PID20 P43B0020A3-C 2,619A16PiK30-60 16 3HP 689 470 20 275 89215-00SS PID50 P43B0030A3-C 3,592A20PiK10-60 20 1HP 270 185 25 140 88616-00SS PID10 P43B0010A3-C 2,211A20PiK15-60 20 1.5HP 389 245 25 190 88617-00SS PID20 P43B0015A3-C 2,413A20PiK20-60 20 2.0HP 493 298 25 225 88618-00SS PID20 P43B0020A3-C 2,619A20PiK30-60 20 3.0HP 623 375 25 270 88619-00SS PID50 P43B0030A3-C 3,592A25PiK15-60 25 1.5HP 279 190 35 120 88919-00SS PID20 P43B0015A3-C 2,413A25PiK20-60 25 2.0HP 355 245 35 150 88920-00SS PID20 P43B0020A3-C 2,619A25PiK30-60 25 3.0HP 482 320 35 225 88921-00SS PID50 P43B0030A3-C 3,592A35PiK20-60 35 2HP 265 165 50 120 89125-NCSS PID20 P43B0020A3-C 2,619A35PiK30-60 35 3HP 350 222 50 140 89127-NCSS PID50 P43B0030A3-C 3,592A50PiK30-60 50 3HP 280 155 65 118 88909-NCSS PID50 P43B0030A3-C 3,592A90PiK20-60 90 2HP 109 55 120 38 A+90SS-200 PID20 P43B0020A3-C 2,619A90PiK30-60 90 3HP 153 90 120 47 A+90SS-300 PID50 P43B0030A3-C 3,592

80Hz NEMA 3 KitsA8PiK15-80 8 1.5HP 655 415 11 300 88605-00SS PID20 P43B0015A3-C $2,258A8PiK20-80 8 2HP 833 528 11 380 88606-00SS PID20 P43B0020A3-C 2,468A8PiK30-80 8 3HP 1012 642 11 460 88607-00SS PID50 P43B0030A3-C 3,486

A12PiK15-80 12 1.5HP 587 308 15 250 88593-00SS PID20 P43B0015A3-C 2,258A12PiK20-80 12 2HP 648 340 15 280 88594-00SS PID20 P43B0020A3-C 2,468A12PiK30-80 12 3HP 864 453 15 380 88595-00SS PID50 P43B0030A3-C 3,486A16PiK15-80 16 1.5HP 418 275 20 175 89221-00SS PID20 P43B0015A3-C 2,258A16PiK20-80 16 2HP 541 366 20 220 89222-00SS PID20 P43B0020A3-C 2,468A16PiK30-80 16 3HP 689 470 20 275 89219-00SS PID50 P43B0030A3-C 3,486A20PiK15-80 20 1.5HP 389 245 25 190 88615-00SS PID20 P43B0015A3-C 2,258A20PiK20-80 20 2.0HP 493 298 25 225 88616-00SS PID20 P43B0020A3-C 2,468A20PiK30-80 20 3.0HP 623 375 25 270 88617-00SS PID50 P43B0030A3-C 3,486A25PiK15-80 25 1.5HP 279 190 35 120 88917-00SS PID20 P43B0015A3-C 2,258A25PiK20-80 25 2.0HP 355 245 35 150 88918-00SS PID20 P43B0020A3-C 2,468A25PiK30-80 25 3.0HP 482 320 35 225 88919-00SS PID50 P43B0030A3-C 3,486A35PiK20-80 35 2.0HP 265 270 50 120 88903-NCSS PID20 P43B0020A3-C 2,468A35PiK30-80 35 3.0HP 345 220 50 145 88904-NCSS PID50 P43B0030A3-C 3,486A50PiK30-80 50 3.0HP 280 160 65 120 88908-NCSS PID50 P43B0030A3-C 3,486

Note: 80Hz Kits utilize an undersized liquid end running at higher speed to match pump performance of the curve equivalent to the driving motor. Maximum life expectancy of the liquid end is obtained using 60Hz solutions.

14 A5817P (11/01/13)

MOTORS AND CONTROLS

Pentek® 6" Submersible Motors

6", Three phase, 230 Volt, 2 pole, 3600 RPM, 60Hz

HP KW PHASE VOlTSCATAlOG NuMbER

liST PRiCE

WT. lbS.

5 4

3

230 6PM2-5-2 $1,865 907-1/2 5-1/2 230 6PM2-7-2 2,242 102

10 7-1/2 230 6PM2-10-2 2,510 11615 11 230 6PM2-15-2 2,894 12120 15 230 6PM2-20-2 3,559 14725 18-1/2 230 6PM2-25-2 4,138 16530 22 230 6PM2-30-2 4,803 190

6", Three phase, 460/380 Volt, 2 pole, 3600/3000 RPM, 60/50Hz

HP KW PHASE VOlTSCATAlOG NuMbER

liST PRiCE

WT. lbS.

5 4

3 460/380

6PM2-5-4 $1,919 907-1/2 5-1/2 6PM2-7-4 2,242 102

10 7-1/2 6PM2-10-4 2,510 11615 11 6PM2-15-4 2,894 12120 15 6PM2-20-4 3,559 14725 18-1/2 6PM2-25-4 4,138 16530 22 6PM2-30-4 4,803 19040 30 6PM2-40-4 5,775 20950 37 6PM2-50-4 7,650 292

Replacement Motor leads6" Canned motors only. 157" lead lengths

HP PHASECATAlOG NuMbER liST PRiCE

5-30 3 PM-RMlD-10 $30340-50 3 PM-RMlD-8 242

A5817P (11/01/13)15

MOTORS AND CONTROLS

Hitachi® 6” Submersible Motors

6”, Single Phase, 230 Volt, 2 pole, 3600 RPM

HP PHASE VOlTS CATAlOG NuMbER liST PRiCE WT. lbS.DEluXE CONTROl

bOX* liST PRiCE5 1 230 6HiT2-5-1 $2,144 121 HiT-5CbD $685

7-1/2 1 230 6HiT2-7-1 2,521 134 HiT-7.5CbD 80510 1 230 6HiT2-10-1 2,826 139 HiT-10CbD 1,18615 1 230 6HiT2-15-1 3,666 154 HiT-15CbD 1,422

* Includes magnetic contactor. NOTE: Hitachi single phase motors must use a Hitachi control box. Use of any other control box will void the warranty.

6”, Three Phase, 230 & 460 Volt, 2 pole, 3600 RPM


liST PRiCE WT. lbS.

5 3200 6HiT2-5-8 $2,035 95230 6HiT2-5-2 1,977 95460 6HiT2-5-4 2,035 95

7-1/2 3200 6HiT2-7-8 2,377 99230 6HiT2-7-2 2,377 99460 6HiT2-7-4 2,377 99

10 3200 6HiT2-10-8 2,661 110230 6HiT2-10-2 2,661 110460 6HiT2-10-4 2,661 110

15 3200 6HiT2-15-8 3,068 121230 6HiT2-15-2 3,068 121460 6HiT2-15-4 3,068 121

20 3200 6HiT2-20-8 3,773 128230 6HiT2-20-2 3,773 128460 6HiT2-20-4 3,773 128

25 3200 6HiT2-25-8 4,387 150230 6HiT2-25-2 4,387 150460 6HiT2-25-4 4,387 150

30 3200 6HiT2-30-8 5,092 161230 6HiT2-30-2 5,092 161460 6HiT2-30-4 5,092 161

40 3 460 6HiT2-40-4 6,122 17650 3 460 6HiT2-50-4 8,109 20060 3 460 6HiT2-60-4 9,943 23150 3 460 86HiT2-50-4** 8,323 23160 3 460 86HiT2-60-4** 9,292 238

** Models are 8” diameter motors with 6” pump connection.

Voltage Plug for converting between 230 and 460 Volts.

for 30 HP and lower 6” motors only.

CONVERT VOlTAGE

CATAlOG NuMbER

liST PRiCE

To 230 Volt S33591 $99To 460 Volt S33592 99

Replacement Motor leads

6” Canned motors only. 150” lead lengths

HP PHASECATAlOG NuMbER

liST PRiCE

5-10 1 HiT-RMlD-10 $3435-25, 40 315 1 HiT-RMlD-8 41530, 50, 60 3

4” Submersible Accessory

CATAlOG NuMbER DESCRiPTiON

liST PRiCE

PKG 4x6 4” Pump x 6” Motor Adapter $449

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., LtdAll other brand or product names are trademarks or registered trademarks of Pentair.

16 A5817P (11/01/13)

MOTORS AND CONTROLS

Hitachi® 8"-14", and 6"-8" High Temperature Submersible Motors


PRiCE WT. lbS.8" – 12", Three Phase, 460 Volt, 2 pole, 3600 rpm

40 3 460 8HiT2-40-4 $9,085 33150 3 460 8HiT2-50-4 10,417 35360 3 460 8HiT2-60-4 13,683 37575 3 460 8HiT2-75-4 15,270 397

100 3 460 8HiT2-100-4 18,873 441125 3 460 8HiT2-125-4 23,424 450150 3 460 8HiT2-150-4 28,015 518200 3 460 10HiT2-200-4 55,460 816250 3 460 10HiT2-250-4 60,182 948300 3 460 12HIT2-300-4 82,659 1455

8" – 14", Three Phase, 460 Volt, 4 pole, 1800 rpm7-1/2 3 460 8HiT4-7-4 $18,854 360

10 3 460 8HiT4-10-4 19,276 36015 3 460 8HiT4-15-4 20,230 38020 3 460 8HiT4-20-4 21,288 38025 3 460 8HiT4-25-4 25,841 41030 3 460 8HiT4-30-4 28,065 41040 3 460 10HiT4-40-4 37,703 59050 3 460 10HiT4-50-4 39,926 59060 3 460 10HiT4-60-4 43,103 72075 3 460 10HiT4-75-4 52,105 720

100 3 460 10HiT4-100-4 57,295 900125 3 460 10HiT4-125-4 58,353 900150 3 460 12HiT4-150-4 65,342 1050200 3 460 12HiT4-200-4 88,852 1370250 3 460 14HiT4-250-4 114,478 1830300 3 460 14HiT4-300-4 132,481 2100

6", Three Phase, 460 Volt, 2 pole, 3600 RPM, High Temperature7.5 3 460 6HiTS2-7-4-HT $3,669 9910 3 460 6HiTS2-10-4-HT 4,411 11015 3 460 6HiTS2-15-4-HT 5,063 12820 3 460 6HiTS2-20-4-HT 5,801 13725 3 460 6HiTS2-25-4-HT 6,899 16130 3 460 6HiTS2-30-4-HT 8,668 17640 3 460 8HiTS2-40-4-HT 13,659 35350 3 460 8HiTS2-50-4-HT 14,745 40860 3 460 8HiTS2-60-4-HT 16,551 46375 3 460 8HiTS2-75-4-HT 25,925 518

100 3 460 8HiTS2-100-4-HT 30,678 595125 3 460 8HiTS2-125-4-HT 36,601 59540 3 460 86HiTS2-40-4-HT** 15,187 34650 3 460 86HiTS2-50-4-HT** 17,287 40160 3 460 86HiTS2-60-4-HT** 26,698 456

** Models are 8" diameter motors with 6" pump connection.

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., LtdAll other brand or product names are trademarks or registered trademarks of Pentair.

A5817P (11/01/13)17

JET PUMPS

Aermotor® FH Series Shallow Well Jet Pumps

Aermotor HNAS Series Horizontal Convertible Jet Pumps

Aermotor VNA Series Vertical Deep Well Jet Pumps

Aermotor VNA2 Series Vertical Multi-Stage Deep Well Jet Pumps

CATAlOG NuMbER MODEl HP VOlTAGEliST

PRiCE WT. lbS.03064 FH50S 1/2 115/230 $627 3903065 FH50 1/2 115/230 704 4003066 FHP50 1/2 115/230 704 4003067 FH75 3/4 115/230 722 4003186 FH1000 1 115/230 780 4103187 FH1003050 1 115/230 780 41

fHSN-100 FHSN-100 1 115/230 809 65

Square flange Motor

PuMP SPECifiCATiONS SHAllOW WEll REDuCER KiTCATAlOG NuMbER HP VOlTAGE

liST PRiCE

WT. lbS. CATAlOG NuMbER DESCRiPTiON

liST PRiCE WT. lbS.

HNAS-50 1/2 115/230 $718 45 PKG CK5 Standard $109

4

PKG 1-55SD High Pressure 109

HNAS-75 3/4 115/230 913 48 PKG CK1 Standard 109 PKG 1-54SD High Pressure 109

HNAS-100 1 115/230 1,014 51 PKG CK2 Standard 109 PKG 1-54SD High Pressure 109

Square flange Motor*

CATAlOG NuMbER HP VOlTAGE liST PRiCE WT. lbS.VNA-100 1 115/230 $1,078 65

*Includes pressure gauge and model PRV21A regulator valve – factory mounted.

Casing Head Adapters*

CATAlOG NuMbER DESCRiPTiON liST PRiCE WT. lbS.08950 Horizontal $131 508680 Vertical 129 5

*For mounting pumps directly to 2” well heads.

Square flange Motor

CATAlOG NuMbER HP VOlTAGE liST PRiCE WT. lbS.VNA2-100 1 115/230 $1,086 73VNA2-150 1-1/2 230 1,476 120VNA2-200 2 230 1,763 125

*Includes pressure gauge and model PRV21A regulator valve – factory mounted.

Pressure regulating valves for hnas2, hna2 , vna2

CATAlOG NuMbER MODEl TYPE liST PRiCE WT. lbS.PKG 107 PRV21A Cast Iron $128 8

18 A5817P (11/01/13)

JET PUMPS

Aermotor® Pump Accessories

WEll SiZE

PuMP HP

DEPTH TO WATER

CATAlOG NuMbER

CAST iRON PRiCE

WT. lbS.

fOR HNAS, HNA and VNA Series single-Stage PuMPS

2”1/2 30-70’ 22177A $121

53/4 30-70’ 22179A 121 1 30-70’ 22181A 121

4”

1/3 30-60’ 22191A 121

5

1/230-60’ 22193A 121 30-80’ 22194A 121

40-100’ 22195A 121

3/4 30-80’ 22196A 121 40-110’ 22197A 121

1 30-70’ 22198A 121 60-120’ 22199A 121

fOR HNAS2, HNA2 and VNA2 Series Multi-Stage PuMPS

2” 1/2 30-110’ 22184A $121 1 30-120’ 22186A 121 5

4”

1/2 30-80’ 22199A 121 30-120’ 22200A 121

53/4 30-80’ 22196A 121 50-130’ 22197A 121

1 30-130’ 22194A 121 30-160’ 22202A 121

*Catalog numbers shown are for iron reducers.2” Well = one pipe reducer4” Well = two pipe reducers (1_” x 1”)NOTE: All reducer assemblies include a Thermax® footvalve.

CATAlOG NuMbER uSED WiTH PuMP SERiES

liST PRiCE

Shallow Well and 4" Deep Well Double PipePKG 1-4SD SL, HL, FL, HMS $109

PKG 1-10SD SL, HL, FL, HMS 109PKG 1-11SD SL, HL, FL, HMS 109PKG 1-12SD SL, HL, FL, HMS 109PKG 1-15SD SL, HL, FL, HMS 109PKG 1-23SD MS, PL 109PKG 1-27SD SL, HL, FL 109PKG 1-29SD SL, HL, FL, HMS 109PKG 1-54SD SL, HL, FL 109PKG 1-55SD SL, HL, FL 109PKG 1-60SD SL, HL 109

Shallow Well and 4" Deep Well Double Pipe - KitsPKG CK1 SL, HL, HMS, SSJ 109PKG CK2 SL, HL, HMS, SSJ 109PKG CK3 SL, HL, HMS, SSJ, FL 109PKG CK4 HMS, SSJ 109PKG CK5 SL, HL, HMS, SSJ 109

4" Deep Well Double Pipe with Accessory PackagesPKG 2A-4SD SL, HL, FL, HMS 143

PKG 2A-15SD SL, HL, FL, HMS 143PKG 2A-23SD MS, PL 143PKG 2A-54SD SL, HL, FL 143PKG 2A-55SD SL, HL, FL 143Pl Series Plastic Shallow Well Jet Packages

PKG 1-21N PL 109PKG 1-22N PL 109PKG 1-23N PL 109PKG 1-24N PL 109

2" Single Pipe Deep Well*PKG 1-54AP SL, HL, FL 109PKG 1-23AP HMS 109PKG 1-22AP HMS 109PKG 1-18AP HMS 109PKG 1-19AP HMS 109PKG 1-16AP PL 109

PKG 1-16APb PL, SSJ 151PKG 1-15AP PL, HMS, SSJ 109PKG 1-14AP PL, SSJ 109PKG 1-13AP PL, HMS 109PKG 1-12AP MS 109

PKG 1-12APb MS 151PKG 1-10AP SL, HL, PL, SSJ 109

PKG 1-10APb SL, HL, PL, SSJ 151PKG 1-9AP SL, HL, PL, SSJ 109

PKG 1-9APb SL, HL, PL, SSJ 151PKG 1-8AP SL, HL, PL, HMS, SSJ, MS, FL 109

PKG 1-8APb SL, HL, PL, HMS, SSJ, MS, FL 151PKG 1-7AP HMS 109

PKG 1-7APb HMS 151PKG 1-5AP HMS 109PKG 1-4AP HMS 109PKG 1-2AP HMS 109

CATAlOG NuMbER uSED WiTH PuMP SERiES

liST PRiCE

3" Single Pipe Deep WellPKG 1-57CP SL, HL 158PKG 1-54CP SL, HL, FL 158PKG 1-26CP PL, SSJ 158PKG 1-25CP PL 158PKG 1-23CP MS 158PKG 1-22CP HMS, MS 158PKG 1-19CP SL, HL, PL, HMS, SSJ, FL 158PKG 1-18CP SL, HL, HMS 158PKG 1-17CP PL, HMS, SSJ, MS 158PKG 1-16CP SL, HL, HMS, SSJ, MS, FL 158PKG 1-15CP PL 158PKG 1-10CP PL, HMS 158PKG 1-7CP HMS 158

Poly Pipe and foot Valve KitPKG 2A 1-1/4" Foot Valve with Long Pipe Adapter 45

1-1/4" Turned Coupling*u11-1 For Use In Deep Well 2" Casing 16.75

Casing AdaptersJ216-13A 2" Vertical - Straight Offset 124J216-21 2" Vertical - Bolt-on 124J216-23 3" Vertical - Bolt-on 124

J216-16A 2" Horizontal - Right Angle 124J216-18A 3" Horizontal - Right Angle 124

J37-4 Offset Nipple 33J216-29b 2" Concentric Pipe - Pitless Adapter 124J216-42 2" Concentric Pipe - Pitless Adapter 299

J216-44 2" Horizontal Right Angle - Suction-Over-Drive with Priming Plug 124

* Order one (1) U11-1 turned coupling for each length of drop pipe.

A5817P (11/01/13)19

TANKS

Pro-Source® Steel Tanks

CATAlOG NuMbER GAl.

DiMENSiON iN iNCHESWT. lbS.

liST PRiCEDiA. HT.

Vertical Steel Pressurized TanksPSP19S-T02 19 20 21 49 $319PSP19T-T02 19 16 27-1/2 44 313PSP32-T03 32 16 43 60 625PSP35-T05 35 20 33 70 625PSP50-T50 50 24 33 88 786PSP62-T51 62 24 39-1/2 116 928PSP85-T52 85 24 51 128 1,067

PSP119-TR50 119 24 68 144 1,464Vertical Steel Pressurized Tanks

PS6-S02 6 12 16 18 $160PS19S-T02 19 20 21 45 269PS19T-T02 19 16 27-1/2 40 263PS32-T03 32 16 43 56 597PS35-T05 35 20 33 66 597PS50-T50 50 24 33 84 714PS62-T51 62 24 39-1/2 112 855PS85-T52 85 24 51 124 992

PS119-TR50 119 24 68 144 1,389 Horizontal Steel Pressurized Tanks

PS6H-S05* 6 12 13-3/4 22 $246PS19H-S00† 19 16 17-1/2 40 480

Epoxylined Vertical Steel Standard TanksAW42 42 20 36 67 $497

AW42T 42 16 53-1/2 65 473AW85 85 24 51 94 752

AW120 120 24 68 120 1,048 in-line Steel Pressurized Tanks

PS2-S01 2 8.4 12.6 10 $97PS5-S02 5 10.6 16.2 12 133

*Tank length is 16-1/8” † Tank length is 28”

Tank fittings and Mounting Packages

CATAlOG NuMbER DESCRiPTiON WT. lbS.

liST PRiCE

PKG 111 Mounting Package for Jet Pumps 3 $69PKG 112 Mounting Package for Jet Pumps 3 64PKG 198 Mounting Bracket for Jet Pumps 5 37

PKG 207 Fittings Package for Jet Pumps to PS42T Tank 3 77

PKG 198 universal Jet Mounting bracket

PKG 111, PKG 112 or PKG 207 Jet Pump-to-Tank Mounting Pkg.

20 A5817P (11/01/13)

TANKS

Pro-Source® Composite Tanks

CATAlOG NuMbER GAl.


liST PRiCE

SuPERCEDES TANK MODElDiA. HT.

Composite Pressure TanksPSC-14-4 14 16 26 14.5 $368 NEWPSC-20-6 20 16 32 18 394 PSP-FW20-6PSC-30-9 30 16 44 25 616 PSP-FW26

PSC-40-12 40 16 57 30 785 PSP-FW40-12PSC-48-14 48 21 41.2 43 798 PSP-FW48-14PSC-60-20 60 24 41.5 50 938 PSP-FW60-18PSC-80-23 80 21 62 66 1,007 NEWPSC-85-25 85 24 55.2 73 1,091 PSP-FW85-25

PSC-119-35 119 24 74.2 95 1,603 PSP-FW119-35

Composite Contact Tanks

CATAlOG NuMbER GAl.


liST PRiCEDiA. HT.

fCT40 40 16 56.5 28 $424fCT80 80 21 62 43 683

fCT120 120 24 72.5 63 902

Composite AOW Pressure Tanks–Side Port

MODEl NuMbER

CAPACiTY GAl/liTER

DRAWDOWN 30/50

SETTiNG GAl/liTER

DiAMETER iNCH/CM

OVERAll HEiGHT

iNCH/CM

uNiT SHiP WEiGHT lb/KG liST PRiCE

SP-7 30 / 114 7 / 26 16 / 41 43.75 / 111 26 / 11.8 $333SP-9 40 / 151 9 / 34 16 / 41 56.5 / 144 35 / 15.9 342

SP-9SQ 47 / 178 9 / 34 21 / 53 41.25 / 105 48 / 21.8 358SP-18 80 / 303 18 / 67 21 / 53 62 / 157 67 / 30.5 558SP-26 120 / 454 26 / 98 24 / 61 72.5 / 184 97 / 44.1 707SP-35 205 / 776 35 / 132 36 / 91 73 / 185 290 / 131.8 2,625SP-50 264 / 999 50 / 189 36 / 91 82 / 208 300 / 136.4 3,321

A5817P (11/01/13)21

TANKS

Galvanized Tanks

Hot Dipped, Galvanized, Vertical and HorizontalUNIVERSAL SPUD LOCATIONS – Featured on all Vertical Pressure Tanks. A practical tank that permits installation with any make or type of pump. ALL TANKS TESTED – All pressure tanks are thoroughly tested under pressure for maximum protection. Each tank is designed for 75 PSI working pressure. HOT DIP GALVANIZED – An even zinc coating inside and out assures longer tank life. All pressure tanks are submerged arc-welded for sronger, leak-proof seams. Galvanized tanks are guaranteed for one year from date of installation against defects in workmanship and material. AIRGUARD – Free-floating barrier keeps the air and water levels in the tank separated. Ends water logging, eliminates the formation of “red water.” High withdrawal capacity, when “precharged,” reduces pump starts.

Drawdown (Gallons/Pump Cycle)20-40 PSi Setting

21 42 42 82 120Gal. T Gal. T Gal. S GAl. GAl.

Atmospheric 2.8 5.5 6.1 11.2 16.815 PSI Precharge 5.3 11.0 11.4 23.0 43.220 PSI Precharge 6.0 12.5 12.4 26.6 38.830-50 PSi SettingAtmospheric 1.9 3.6 3.5 7.4 10.615 PSI Precharge 3.5 7.4 7.4 14.8 18.120 PSI Precharge 4.3 8.5 8.8 17.5 23.625 PSI Precharge 4.8 9.8 10.0 20.0 29.030 PSI Precharge 5.3 10.5 10.7 21.6 33.2

Use these charts to precharge AirGuards Tanks.

Vertical Tank

MODElCAPACiTY u.S. GAl.

SHiP WT lbS.

DiAMETER iN. HEiGHT iN. A b C

liST PRiCE

V42GT 42 71 16 51 12” 26” 3” $424V42GS 42 71 20 33-5/8 8” 17” 3” 459

AV42GS 42 71 20 33-5/8 8” 17” 3” 496V82G 82 114 20 63 12” 33” 3” 732

AV82G 82 114 20 63 12” 33” 3” 783V120G 120 154 24 64-1/2 12” 33” 3” 958V220G 220 303 30 78 12” 38” 8-1/2” 2,358V315G 315 416 36 79-1/2 13” 39” 9-1/2” 3,126

NOTE: Add freight charges on 220 gallon and higher.

Model V315G

22 A5817P (11/01/13)

ABOVE-GROUND PUMPS

Aermotor® CT Series End Suction Centrifugal Pumps

Aermotor DMC Series

SERiES DiSCHARGE SECTiON HP VOlTAGE RPM

SiNGlE PHASE ODP THREE PHASE ODPCATAlOG NuMbER

liST PRiCE

WT. lbS.

CATAlOG NuMbER

liST PRiCE

WT. lbS.

CT35 cast iron

1” 1-1/4”

1/2 115/230

3500

CT35-50 $659 39 CT35-3-50 $712 39 3/4 115/230 CT35-75 717 42 CT35-3-75 772 42

1 115/230 CT35-100 786 451-1/2 115/230 CT35-150 868 49 CT35-3-150 934 49

1-1/4” 1-1/2” 2 230 CT35-200 1,079 69 CT35-3-200 1,180 691-1/2” 2” 2-1/2 230 CT35-250 1,250 74 CT35-3-250 1,354 74

CT35 cast iron 1-1/4” 1-1/4”

1/2 115

3500

CT45-33 576 38 1/2 115/230 CT45-50 637 43 CT45-3-50 688 43 3/4 115/230 CT45-75 698 45 CT45-3-75 751 46

1 115/230 CT45-100 763 481-1/2 115/230 CT45-150 836 55 CT45-3-150 901 50

*NPT threaded connections - close coupled - mechanical seal

HP SERiES VOlTAGE SuCTiON DiSCHARGE

PuMP/MOTOR uNiT1 SiNGlE PHASE 115/230V SHAllOW WEll ADAPTER

CATAlOG number

liST PRiCE

WT. lbS.

CATAlOG number

liST PRiCE

WT. lbS.

1 DMC-2-100115/230 1-1/4” 1”

07052 $1,138 54 66661 $100 31-1/2 DMC-2-150 07053 1,328 61 07656 101 3

2 DMC-2-200 07054 1,494 63 07657 101 31 2 HP available 230V only.

DMC SWiTCH KiT

CATAlOG NuMbER liST PRiCE WT. lbS.

66632 $107 2Applies to all Models.

Square D® Pressure and Float Switches

CATAlOG NuMbER

liST PRiCE PKG TYPE

SQuARE D SWiTCH

MODEl fORM NO.PSi

SETTiNG

CuT-iN RANGE

PSi

APPROX. ADJuSTAblE

DiffERENTiAl

CuT-OuT RANGE

PSi

MAXiMuM HP RATiNGSiNGlE PHASE THREE PHASE115V 230V 230V 460V

75722 $122 Ind. Bxd. FSG2 NOTE 1 20-40 5-45 15-30 20-65 1-1/2 2 3 174783 122 Ind. Bxd. FSG2 NOTE 1 40-6074368 187 Bag of 50 1530-S6-G1 Pulsation Plugs Used to eliminate pulsations that can cause switch to cycle75066 234 Ind. Bxd. DG2R Float Switch (Pump Up) Contacts open on liquid rise, Nema 1 enclosure, 2-pole

NOTE 1: Low pressure cut-off (auto-start-off). Operates at approx. 10 PSIG below cut-in and will turn the pump off.

Square D® is a registered trademark of SNA Holdings Inc.

A5817P (11/01/13)23

ABOVE-GROUND PUMPS

Aermotor® SPCH/SPCM Series Self-Priming Pumps

PKG 52 1-1/2”

PKG 516” Trap

PKG 532” NPT

PKG 988” Trap

PKG 72 2-1/2”

PKG 76

PKG 733” NPT

Aermotor Centrifugal Pump Accessories

High and Medium Heads

HP SERiES SuCTiON DiSCHARGE PuMP TYPE

PuMP/MOTOR uNiT 1 PHASE 208-230V

PuMP/MOTOR uNiT 3 PHASE 208-230/460V

CATAlOG NuMbER

liST PRiCE

WT. lbs.

CATAlOG NuMbER

liST PRiCE

WT. lbs.

3 SPCH300 2” 1-1/2” High head SPCH-300 $2,445 145 SPCH-3-300 $2,282 1455 SPCH500 2-1/2” 2” High head SPCH-500 2,980 185 SPCH-3-500 2,469 1853 SPCM300 2-1/2” 2” Medium head SPCM-300 2,445 145 SPCM-3-300 2,326 1455 SPCM500 3” 2-1/2” Medium head SPCM-500 2,980 185 SPCM-3-500 2,469 185

Square flange Motor – Cast iron body – Noryl® impeller, 1-2 HP

HP SERiES SuCTiON DiSCHARGE


PuMP/MOTOR uNiT 3 PHASE 200-230/460V

CATAlOG NuMbER

liST PRiCE WT. lbs.

CATAlOG NuMbER

liST PRiCE WT. lbs.

1 SPCA-1002" 1-1/2"

SPCA-100 $871 66 SPCA-3-100 $928 751-1/2 SPCA-150 SPCA-150 927 74 SPCA-3-150 989 77

2 SPCA-200 SPCA-200 1,286 76 SPCA-3-200 1,387 81

Square flange Motor– Composite body – Noryl impeller, 1 & 1-1/2 HP

HP SERiES SuCTiON DiSCHARGE


CATAlOG NuMbER

liST PRiCE WT. lbs.

1 SPD2H-100 1-1/2" 1-1/2" SPD2H-100 $706 301-1/2 SPD2H-150 SPD2H-150 738 34

Aermotor SPCA Series Self-Priming Centrifugal Pumps

Aermotor SPD2H Series Self-Priming Centrifugal Pumps

CATAlOG NuMbER DESCRiPTiON

liST PRiCE

flange AdaptersPKG 52 1-1/2” Adapter Flange $91PKG 53 2” Adapter Flange 91PKG 72 2-21/2” Adapter Flange 137PKG 73 3” Adapter Flange 137

Suction TrapsPKG 51 6” Cast Iron Trap w/Basket and 2” NPT Suction Port $256PKG 98 8” Cast Iron Trap w/Basket and 3” NPT Suction Port 716

PKG 76 Cast Iron Flange for Remote Trap Installation, with 3” NPT Suction Port 88

24 A5817P (11/01/13)

ABOVE-GROUND PUMPS

Aermotor® HBPS Series High Pressure Booster Pumps

Cast iron fitted

GPM HP VOlTAGE STAGESSuCTiON PiPE SiZE

DiSCHARGE PiPE SiZE

1 PHASE MODEl

liST PRiCE WT. lbS.

71/2 115/230 9 3/4” 3/4” 7HbP50 $1,081 483/4 115/230 12 3/4” 3/4” 7HbP75 1,150 481 115/230 16 3/4” 3/4” 7HbP100 1,334 51

10

1/2 115/230 6 3/4” 3/4” 10HbP50 1,005 453/4 115/230 8 3/4” 3/4” 10HbP75 1,174 461 115/230 10 3/4” 3/4” 10HbP100 1,206 50

1-1/2 115/230 14 3/4” 3/4” 10HbP150 1,513 582 115/230 16 3/4” 3/4” 10HbP200 1,772 63

20

1 115/230 7 1” 1” 20HbP100 1,204 491-1/2 115/230 9 1” 1” 20HbP150 1,364 57

2 115/230 11 1” 1” 20HbP200 1,621 623 208/230 15 1” 1” 20HbP300 1,624 59

30

1 115/230 5 1-1/4” 1-1/4” 30HbP100 1,218 471-1/2 115/230 6 1-1/4” 1-1/4” 30HbP150 1,374 54

2 115/230 7 1-1/4” 1-1/4” 30HbP200 1,661 573 208/230 11 1-1/4” 1-1/4” 30HbP300 2,283 59

NOTE: ODP Motor is standard. For TEFC motor, contact customer service.

Aermotor HBPS Series Booster Pumps

Stainless Steel fitted

GPM HP VOlTAGE STAGESSuCTiON PiPE SiZE

DiSCHARGE PiPE SiZE

1 PHASE MODEl

liST PRiCE WT. lbS.

71/2 115/230 9 3/4” 3/4” 7HbPS50 $1,463 483/4 115/230 12 3/4” 3/4” 7HbPS75 1,587 481 115/230 16 3/4” 3/4” 7HbPS100 1,717 51

10

1/2 115/230 6 3/4” 3/4” 10HbPS50 1,389 453/4 115/230 8 3/4” 3/4” 10HbPS75 1,555 461 115/230 10 3/4” 3/4” 10HbPS100 1,644 50

1-1/2 115/230 14 3/4” 3/4” 10HbPS150 1,894 582 115/230 16 3/4” 3/4” 10HbPS200 2,151 63

20

1 115/230 7 1” 1” 20HbPS100 1,587 491-1/2 115/230 9 1” 1” 20HbPS150 1,743 57

2 115/230 11 1” 1” 20HbPS200 1,998 623 208/230 15 1” 1” 20HbPS300 2,548 59

301 115/230 5 1-1/4” 1-1/4” 30HbPS100 1,591 47

1-1/2 115/230 6 1-1/4” 1-1/4” 30HbPS150 1,748 542 115/230 7 1-1/4” 1-1/4” 30HbPS200 1,953 57

NOTE: ODP Motor is standard. For TEFC motor, contact customer service.

A5817P (11/01/13)25

REPLACEMENT MOTORS

Aermotor® Above Ground Replacement Motors

JET PuMP

SERiESSPECifiC MODEl

NuMbER fRAME HP Sf

SiNGlE PHASE MOTOR

NO.SiNGlE PHASE

liST PRiCE

WT. lbS.

THREE PHASE MOTOR

NO.THREE PHASE

liST PRiCE

WT. lbS.

FH FH50, FHP50 48Y 1/2 1.6 77013b A.O.S. $344 19

Not Available

FH75 48Y 3/4 1.5 77014b A.O.S. 398 21

HNAS/HNAS2

HNAS33 48Y 1/3 1.8 — — — —HNAS50, HNAS2-50 48Y 1/2 1.6 77013b A.O.S. 344 19HNAS75, HNAS2-75 48Y 3/4 1.5 77014b A.O.S. 398 21

CT35 CT35-50 48Y 1/2 1.6 77013b A.O.S. 344 19CT35-75 48Y 3/4 1.5 77014b A.O.S. 398 21

CT45CT45-33 56Z 1/3 1.8 — — — —CT45-50 48Y 1/2 1.6 77013b A.O.S. 344 19CT45-75 48Y 3/4 1.5 77014b A.O.S. 398 21

HNA/HNA2/

HJS

HNA50, HNA2-50, HJS50 56J 1/2 1.6 77018b A.O.S. 359 16

HNA75, HNA2-75, HJS75 56J 3/4 1.5 77019b A.O.S. 381 19

HNA100, HNA2-100, HJS100 56J 1 1.4 77026b A.O.S. 458 22

DMC

DMC2-75 56J 3/4 1.5 77019b A.O.S. 381 19DMC2-100 56J 1 1.4 77026b A.O.S. 458 22DMC2-150 56J 1-1/2 1.3 77145b A.O.S. 560 28DMC2-200 56J 2 1.2 77024b A.O.S. 699 31

SPCSPC-100 56J 1 1.4 77026b A.O.S. 458 22SPC-150 56J 1-1/2 1.2 77145b A.O.S. 560 28SPC-200 56J 2 1.2 77024b A.O.S. 699 31

*Current at the time of printing, subject to change.

26 A5817P (11/01/13)

TERMS OF AGREEMENT

The terms and conditions in this document, together with Aermotor®’s standard or custom product specifications, where applicable, constitute the entire Agreement between Aermotor and Buyer. The placing of an order with Aermotor shall constitute the acceptance of all Aermotor’s terms and conditions of sale and any different and/or additional terms contained in a Purchaser’s orders, confirmations, letters or other documents shall be considered as rejected by Aermotor. No additional or different term or condition will become part of this Agreement unless agreed to in writing by Aermotor.

ACCEPTANCE AND PAYMENTAermotor reserves the right to reject and refuse to process any order for any reason whatsoever. Any portion of the purchase price which is not paid in accordance with applicable payment terms shall accrue interest at a rate of 1-1/2% per month and be paid by the Buyer, in the event an application law limits the accrual of interest on an outstanding balance to a lesser rate, then interest shall accrue at that rate. Aermotor shall apply payments received against outstanding invoices and/or interest charges at its discretion.

PRiCES AND TAXESAll prices, discounts and specifications are subject to change by Aermotor, without prior notice, effective with Aermotor’s publication of its revised price list or discount schedule applicable thereto, or in lieu thereof, written notification by Aermotor. Prices and discounts applicable to unshipped quantities of existing orders, as well as to new orders, shall be those in effect at time of shipment. Published prices cover Aermotor’s standard design and construction, and published prices will not be reduced even though a design change might be made subsequently to the publication of the prices. Special items, materials, tests, etc., not contained in the catalog will be separately priced by Aermotor. Prices do not include applicable sales taxes.

QuOTATiONSNo quotations shall be binding on Aermotor unless confirmed in writing. Prices so quoted will be binding on Aermotor for 30 days from the date of the quotation, except those accessories or components not of Aermotor’s manufacture. Clerical errors on the quotations are subject to correction by Aermotor.

DEliVERYAny dates or schedules which may be specified for the delivery of goods covered hereby have been stated only approximately and are estimated from the date of receipt of Purchaser’s order, with complete drawings, specifications, designs, sample and other information reasonably requested by Aermotor in order to proceed with the design and manufacture of the goods. Aermotor shall not be liable for any loss, cost, expense, delay, loss or damage in transit or due to the unavailability of sufficient Products to fill the order. Method and route of shipment are at Aermotor’s discretion, unless the Buyer supplies explicit instructions. If method and route of shipment are so specified by the Buyer after the goods are ready to ship and after the original delivery date has been requested by the Buyer, the Buyer’s price will be due and payable at the same time and in the same manner as if shipment has been made so as to comply with the delivery date originally requested by the Buyer. If any part of the goods cannot be delivered due to delay by Buyer, Seller may place such goods in storage. In such events:

1. Seller’s delivery obligations shall be deemed fulfilled and title and all risk of loss or damage shall thereupon pass to Buyer;

2. Any amounts otherwise payable to Seller upon delivery shall be payable upon presentation of Seller’s invoice and its certification as to such cause; and

3. All expenses incurred by Seller such as for preparation for and placement into storage, handling, inspection, preservation and insurance, shall be payable by Buyer upon submission of Seller’s invoices.

iNAbiliTY TO PERfORMAermotor shall not be responsible or liable for any delays or failures in manufacture or delivery due to any cause or condition beyond the reasonable control of Aermotor. In the event of such a condition Aermotor shall have the right, at its option, to cancel this contract or any part thereof without any resulting liability.

lAWS, ORDiNANCES AND REGulATiONSAermotor shall use reasonable efforts to cause the goods to comply with federal safety, health and environmental regulations and insurance codes. However, Aermotor shall not be responsible for compliance of the goods with local interpretations of such federal regulations or insurance codes, nor with any local laws, ordinances, codes and/or regulations which may at any time be in effect at any location where the goods or equipment are to be used, unless such responsibility shall be expressly assumed by Aermotor in writing.

CHANGE Of DESiGNAermotor shall be entitled to make any and all changes in details of design, construction or arrangement of the Goods as Aermotor in its sole discretion determines will constitute an improvement upon the equipment or any specifications or designs previously furnished to the Buyer.

WARRANTYAermotor will honor its standard warranties covering the goods for the period of time stated in its warranty policies provided the equipment shall have been properly installed, maintained and utilized during the warranty period. Aermotor’s warranties shall extend only to the original Buyer from Aermotor or from Aermotor’s authorized Dealer. Aermotor shall in no event be responsible for the cost of field labor or any other charges incurred by Buyer in removing and/or reaffixing any portion of the goods to be returned to Aermotor for repair or replacement. The warranty does not apply to performance caused by abrasive materials, corrosion due to aggressive

A5817P (11/01/13)27

TERMS OF AGREEMENT

fluids, lighting, improper voltage supply, mishandling or misapplication. Seller’s obligations under this warranty shall not apply to any product which is normally consumed in operation or has a normal life inherently shorter than the warranty period stated. In the event goods are altered or repaired by Buyer without prior written approval by Seller, all warranties are void. Equipment and accessories not manufactured by Seller are warranted only to the extent of and by the original manufacturer’s warranty.

DiSClAiMER Of WARRANTiESExcept for express warranties as described above, there are no warranties including any implied warranties of merchantability or fitness for any particular purpose, which extend beyond the description of the equipment on the face hereof. No other warranties, whether oral, written, express, implied or statutory shall apply. A new warranty period shall not be established for repaired or replaced material, products or supplies, such items shall remain under warranty only for the remainder of the warranty period on the original materials, products or supplies.

liAbiliTY liMiTATiONS/REMEDiESIn no event shall Aermotor be liable to the Buyer or any third party for consequential, incidental or special damages resulting from or in any manner related to the equipment, its design, use, or inability to use the same, including without limitation, damages arising out of or in any manner relating to the delivery or operation of the goods or any delay with respect to its delivery or operation, it being understood that the sole and exclusive remedy of the Buyer or any third party shall be the repair, correction or replacement of defective equipment pursuant to the warranty provisions hereinabove contained. In the event Aermotor determines repair, correction or replacement of the goods is not possible, the Buyer’s sole and exclusive remedy shall be the refund of the purchase price upon its return of the equipment to Aermotor.

CANCEllATiONAn order for other than standard goods included within Aermotor’s published catalogs may be canceled in whole or in part by the Buyer only upon the payment to Aermotor by the Buyer, as a cancellation charge, an amount equal to not less than the sum of any and all material, labor, shop and administrative overhead costs previously or thereafter incurred by Aermotor in connection with such order, or part thereof, canceled, including without limitation, the cost of all engineering work, work in progress, raw materials, supplies and all commitments made by Aermotor in connection with the order, plus a reasonable profit based upon the total amount of such costs. Upon receipt of written notice from the Buyer to cancel an order, or part thereof, Aermotor shall exercise reasonable efforts in order to limit the amount of any additional costs incurred, provided, that any such work which can be completed within a period of thirty (30) days from date of receipt of notification may, at the sole option of Aermotor, be completed and Buyer shall pay for the same in full. In its sole discretion, Aermotor may reduce the amount of the aforesaid cancellation charge in the event and to the extent that any work and/or materials performed by Aermotor in connection with the order, or part thereof, canceled can be put into profitable use by Aermotor.

TiTlE SECuRiTY AGREEMENTSAermotor has the right to retain a security interest in the goods, and if it chooses to do so, the Buyer agrees to sign a Security Agreement, financing statement, or such other documents as Aermotor may require, and do whatever else is necessary to perfect Aermotor’s security interest in the product.

ClAiMSClaims for defective products, delays, or failure in shipment or delivery shall be deemed waived and released by Buyer unless made in writing ten (10) days after arrival of the products. Claims for products lost or damaged in transit must be made to the carrier by Buyer.

RETuRNED PRODuCTSProducts manufactured by Aermotor may be returned if prior written consent of Aermotor is obtained, transportation costs are prepaid by the Buyer and a minimum restocking charge is paid by the Buyer. Only unused material of current manufacture and standard material and design will be accepted. The return of any component or accessory supplied by Aermotor but manufactured by other suppliers will be subject to the terms and conditions for returned goods of said suppliers.

PACKiNGPublished prices include packing for rail or commercial truck only. Additional charges will be made for special or export packing.

WEiGHTS AND DiMENSiONSAll weights and dimensions published by Aermotor are approximated and are not guaranteed. Certification as to weight and dimensions may be obtained from Aermotor upon request and upon payment of the costs incurred in providing certification. In the event the express terms of this Agreement are contradicted or varied by trade usage, course of dealing or course of performance, the express terms shall govern.

iNDEPENDENT CONTRACTORSAermotor and Buyer are independent contractors and neither has the authority to assume or to create any obligation on behalf of or in the name of the other.

GOVERNiNG lAWThis Agreement shall be governed by and construed in accordance with the laws of the State of Wisconsin without regard to principles of conflicts of laws.

© 2013 Pentair. All Rights Reserved. A5817P (11/01/13)

Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.

293 WRIGHT STREET, DELAVAN, WI 53115 WWW.AERMOTOR.COMPH: 888-782-7482 ORDERS FAX: 800-426-9446

Documents

AERMOTOR PUMPS AND WATER SYSTEMS U.S. 2014 …aermotor.com/pdf/Pricing/2013/A5817P_US_Aermotor_water_systems(1… · aermotor ® pumps and water systems u.s. 2014 list prices a5817p