Upload
ian-finylsd
View
853
Download
1
Embed Size (px)
Citation preview
Excel Training Manual
Advanced Level
Table of Contents The Excel 2010 Window ...................................................................................................................................... 1
Customise the Quick Access Toolbar.(QAT) ........................................................................................................ 2
How to create your own ribbon .......................................................................................................................... 3
Add groups of commands to QAT ....................................................................................................................... 4
Shortcut Menu .................................................................................................................................................... 5
Conditional Formatting ....................................................................................................................................... 6
Split window........................................................................................................................................................ 8
View more than one worksheet on the screen .................................................................................................. 8
Freeze screen ...................................................................................................................................................... 9
Hiding Part or all of the workbook ...................................................................................................................... 9
Functions ........................................................................................................................................................... 11
What the IF function does ................................................................................................................................ 13
Leaving Cells Blank ............................................................................................................................................ 13
Nested IF Functions ........................................................................................................................................... 13
How to Trace Precedents and Dependents in Formulas .................................................................................. 15
Understanding precedents and dependents of Excel formulas. ...................................................................... 15
Correct an error value ....................................................................................................................................... 16
Correct common problems in formulas ............................................................................................................ 16
Turn error checking rules on or off ................................................................................................................... 17
Correct common formula errors one at a time ................................................................................................ 17
Mark common formula errors on the worksheet and correct them there ...................................................... 18
Evaluate a nested formula one step at a time .................................................................................................. 18
Watch a formula and its result by using the Watch Window ........................................................................... 19
Add cells to the Watch Window ....................................................................................................................... 19
Remove cells from the Watch Window ............................................................................................................ 20
Goal Seek .......................................................................................................................................................... 20
Use Goal Seek to determine the interest rate .................................................................................................. 20
What if Analysis ................................................................................................................................................. 21
Overview ........................................................................................................................................................... 21
Use scenarios to consider many different variables ......................................................................................... 21
Sub totals in a list of data in a worksheet ......................................................................................................... 22
Inserting subtotals ............................................................................................................................................ 22
Remove subtotals ............................................................................................................................................. 23
Charts ................................................................................................................................................................ 24
Secondary Axis .................................................................................................................................................. 24
Add a secondary vertical axis ............................................................................................................................ 24
Add a secondary horizontal axis ....................................................................................................................... 25
Change the chart type of a data series ............................................................................................................. 25
Remove a secondary axis .................................................................................................................................. 25
Change the scale of the vertical (value) axis in a chart ..................................................................................... 25
Trendlines ......................................................................................................................................................... 26
Sparklines .......................................................................................................................................................... 27
Create a Sparkline ............................................................................................................................................. 27
Show and customize axis settings ..................................................................................................................... 28
Handle empty cells or zero values .................................................................................................................... 28
Pivot tables/charts ............................................................................................................................................ 29
Sort data by multiple groups ............................................................................................................................ 32
Slicers ................................................................................................................................................................ 33
Using slicers....................................................................................................................................................... 34
Formatting slicers for a consistent look ............................................................................................................ 34
Sharing slicers between PivotTables ................................................................................................................. 34
Create a slicer in an existing PivotTable ........................................................................................................... 35
Create a standalone slicer ................................................................................................................................. 35
Format a slicer................................................................................................................................................... 36
Make a slicer available for use in another PivotTable ...................................................................................... 36
Use a slicer from another PivotTable ................................................................................................................ 36
Disconnect or delete a slicer ............................................................................................................................. 37
Show Formulas .................................................................................................................................................. 38
Add a Comment ................................................................................................................................................ 38
How to Add a Comment .................................................................................................................................... 38
Edit/Format a Comment ................................................................................................................................... 38
Move or Resize a Comment .............................................................................................................................. 38
Display or hide comments and their indicators ................................................................................................ 39
Review all comments in a workbook ................................................................................................................ 39
Delete a comment............................................................................................................................................. 39
Cell ranges ......................................................................................................................................................... 40
Use of Defined Names ...................................................................................................................................... 41
Navigation ......................................................................................................................................................... 41
Macros .............................................................................................................................................................. 42
Record a macro ................................................................................................................................................. 42
To set the security level temporarily to enable all macros ............................................................................... 42
Assign a macro to an object, graphic, or control .............................................................................................. 43
Assign a macro to the Quick Action Toolbar or to customize the ribbon ......................................................... 43
Delete a macro .................................................................................................................................................. 44
To Compare and Merge Workbooks: ................................................................................................................ 45
Track changes .................................................................................................................................................... 46
How track changes works ................................................................................................................................. 46
Ways to use track changes ................................................................................................................................ 46
Turn on track changes for a workbook ............................................................................................................. 47
Settings for Track Changes ................................................................................................................................ 48
Stop highlighting changes ................................................................................................................................. 48
View tracked changes ....................................................................................................................................... 48
Accept and reject changes ................................................................................................................................ 48
View the history worksheet .............................................................................................................................. 49
Turn off change tracking for a workbook ......................................................................................................... 50
Password protection on worksheets/workbooks ............................................................................................. 50
To protect your Worksheet ............................................................................................................................... 51
Protect elements in a shared workbook ........................................................................................................... 51
Print Screen (Screen Shot) ................................................................................................................................ 52
General keyboard shortcuts ............................................................................................................................. 53
Accelerating Microsoft Excel ............................................................................................................................. 53
1
The Excel 2010 Window
Tab Menu Bar – Select on any of the tabs to display ribbons and commands. Quick Access Toolbar – Add commands here that you use on a regular basis. Ribbon – In Excel, each tab on the ribbon has different buttons and commands that are organized into ribbon groups. Cell Reference box – Shows you which cell is selected within the worksheet. Worksheet name – Use these tabs to move between worksheets. Zoom bar – Use this to increase the size of the view of the worksheet. Scroll bars – Use these to move around larger worksheets. Help files – Use this to access Microsoft tutorials and help files. Minimise window – Minimises spread sheet to the bottom taskbar. Exit – Leave Excel.
Tab Menu Bar Help files Ribbon Hide the
Ribbon
Minimise
window
Reduces the
size of the
window
Exit
Scroll bar Worksheet
name
Quick access
toolbar
Cell
Reference
box
Zoom bars
Ribbon
Groups
2
Customise the Quick Access Toolbar (QAT).
By adding buttons to this toolbar, you can keep all of your favourite commands visible at all times, even
when you switch ribbon tabs. This can be moved below the ribbon if you would rather use it from that
position.
Select the drop-down arrow
next to the Quick Access
Toolbar to turn on or off any
of the commands listed on
the shortcut menu. Select or
deselect as necessary.
If the command you want to add
isn’t shown in the list, switch to the
ribbon tab where the button
appears and then right-select over
it. On the shortcut menu that
appears, select Add to Quick Access
Toolbar.
3
If the command you want to add is not on the ribbon,
select the drop down arrow on the quick access toolbar
and select More Commands.
Select Commands Not in the Ribbon you can then
chose from any on the list.
Once you have selected one select the add
button
If you need to group them, select a
command and use the up/down arrows on
the right of the window.
Select OK
How to create your own ribbon
Right click on ribbon area and select customize ribbon option. Now, add a new tab (or group or both) – see below for illustration. Add a few commands (or buttons) to your new ribbon Click ok and you have a sparkling new ribbon ready.
4
1. Create a new ribbon tab. 2. Add a new group of commands to an existing or new ribbon. 3. Change the name of an existing custom group or tab. 4. Select a group / tab to add items to that group / tab. 5. Choose the type of commands you want to add to your ribbon tab / group. 6. Select the command you want to add to your group 7. Click on “Add” button. 8. Remove any commands from custom tabs / groups. 9. Move your ribbon tab / group up or down.
Add groups of commands to QAT
You can add a group of commands to the Quick Access Toolbar by right clicking on the group name and selecting Add to Quick Access Toolbar.
5
When you select the group on the Quick Access Toolbar it opens up to the group.
Shortcut Menu
Right-click display a shortcut menu that gives you
quick access to many of the most commonly used
features. If an arrow appears next to your selection,
you can click to see more options. For example, right-
clicking an Excel document displays Paste Options,
insert, delete, formatting, and other options.
Key Tips are built-in keyboard
shortcuts available in Excel. To
display a letter or number by each
Ribbon tab or Quick Access
Toolbar command after you press
a letter or number, you get new
Key Tips letters and numbers to
access each command in the
location you selected.
6
Conditional Formatting
Using Conditional Formatting in a cell allows you to automatically format a cell depending on its
contents. You might need to format cells using:
A two/three colour scale – higher or lower values are highlighted in a sliding scale of colour.
Data bars
Icon sets
Cells that contain text, number or date or time values
Top or bottom ranked numbers
Values that are above or below average
Unique or duplicate numbers
A formula to determine cell formatting
Select the cells you need to format and on the Home tab and in the Styles group select the conditional
formatting command and either select from the list for specific formatting or select Manage Rules to
make changes or delete a previous rule.
Select New Rule
7
From the list select the most suitable format
required for the cells.
Depending on the option you select from
the list, the rule description will change.
Fill this is accordingly and change the
formatting you require for the cell when the
condition is achieved.
8
Split window
You can use Split Screens to display two/four different parts of the same worksheet at the same time.
Windows can be split both horizontally and
vertically.
This can be done by selecting the View tab and
selecting Split from the Window group. The view
will then split into four sections. Reduce this to
two by selecting and dragging the dividing bar to the right (for horizontal View) or Down (for vertical
view)
You can only have four/two views from the same worksheet; you cannot use it to view different
worksheets or workbooks
To remove the Split Pane de-select the Split command by clicking it.
View more than one worksheet on the screen
To enable you to view more than one worksheet of the workbook, you
can open the workbook into a new window (depending on how many
worksheets you need to see). On the View tab and in the Window
group select the Arrange All command which opens the Arrange
Windows dialogue box, select the layout you require and click OK. If
you only require the active workbook worksheets select the Windows
of Active Workbook tick box. To enable you to view more than one
work book at once select Arrange All command in the Window group of
the View tab.
To view two worksheets at
once select Side by Side
command in the Windows
group on the View tab.
All worksheets viewed in
the pane can be scrolled
together by selecting the
Synchronous Scrolling and all can be reset to cell A1 by selecting Reset Window Position on the same
tab/group.
9
Freeze screen
Freezing the panes of the workbook will allow you to view row and column/row headings even though
you are scrolling down/across the workbook.
On the view Tab and in the windows group select the Freeze Frames command; you are given the
options of freezing the top row, first
column or at a custom point in the
worksheet.
To customise the point to freeze the
frames select the point you want to
freeze at and select the Freeze Frames
from the drop down list. The point that
the worksheet will be frozen will be at
the top left hand corner of the cell that is selected.
Hiding Part or all of the workbook
Hiding a part of the workbook or
all of it can ensure some privacy
and make worksheets easier to
work on.
Workbooks can be hidden by
selecting the relevant workbook
and on the view tab, in the Window group select the Hide command. Likewise select Unhide to view
the workbook and select the workbook to unhide
from the list and select OK.
When the workbook is hidden it cannot be viewed on the task bar at the bottom of the screen.
Worksheets can be hidden by right selecting on the worksheet tab and
selecting Hide, likewise right select on any worksheet and select Unhide and
select from the list and select OK to make the worksheet visible again.
10
Columns and Rows can be hidden by selecting the relevant rows or columns
and right clicking on one of the selected segments and selecting Hide. To
unhide, highlight the columns or rows on either side of the hidden section and
right click and select Unhide.
To select non adjacent columns or rows place the pointer on the coloured bar
at the top/beginning of the column/row and using the control key select on
the relevant sectors.
11
Functions
Excel has a lot of inbuilt functions
that are used in the manipulation of
data. They are broken down into
Database, Date and Time,
Engineering, Financial, Information,
Logical, Lookup and Reference,
Maths and Trigonometry,
Statistical, Text and External functions. They can either be typed into the formula bar following the
screen tips or using the function wizard which you can access via the Formulas tab and the Insert
Function command.
Function What it will do
NETWORKDAYS.INTL Returns the number of whole workdays between two dates using parameters to indicate which and how many days are weekend days
NOW Returns the serial number of the current date and time
TIME Returns the serial number of a particular time
TODAY Returns the serial number of today's date
WEEKDAY Converts a serial number to a day of the week
WORKDAY Returns the serial number of the date before or after a specified number of workdays
WORKDAY.INTL Returns the serial number of the date before or after a specified number of workdays using parameters to indicate which and how many days are weekend days
YEAR Converts a serial number to a year
CONVERT Converts a number from one measurement system to another
ISBLANK Returns TRUE if the value is blank
AND Returns TRUE if all of its arguments are TRUE
IF Specifies a logical test to perform
NOT Reverses the logic of its argument
OR Returns TRUE if any argument is TRUE
12
TRUE Returns the logical value TRUE
HLOOKUP Looks in the top row of an array and returns the value of the indicated cell
HYPERLINK Creates a shortcut or jump that opens a document stored on a network server, an intranet, or the Internet
LOOKUP Looks up values in a vector or array
MATCH Looks up values in a reference or array
TRANSPOSE Now in Paste Special
VLOOKUP Looks in the first column of an array and moves across the row to return the value of a cell
ROUND Rounds a number to a specified number of digits
ROUNDDOWN Rounds a number down, toward zero
ROUNDUP Rounds a number up, away from zero
AVERAGEIF Returns the average (arithmetic mean) of all the cells in a range that meet a given criteria
COUNT Counts how many numbers are in the list of arguments
COUNTA Counts how many values are in the list of arguments
COUNTBLANK Counts the number of blank cells within a range
COUNTIF Counts the number of cells within a range that meet the given criteria
COUNTIFS Counts the number of cells within a range that meet multiple criteria
MIN Returns the minimum value in a list of arguments
CHAR Returns the character specified by the code number
CONCATENATE Joins several text items into one text item
DOLLAR Converts a number to text, using the $ (dollar) currency format
LEFT, LEFTB Returns the leftmost characters from a text value
IFERROR Returns a value you specify if a formula evaluates to an error;
otherwise, returns the result of the formula
13
What the IF function does
Functions can be nested together to achieve the desired effect, with the IF function being one of Excel’s
most useful and most used functions. Basically, it tests to see whether a certain condition is true or
false. If the condition is true, the function will do one thing, if the condition is false, the function will do
something else.
The basic form of the function is:
=IF(logic test, value if true, value if false)
The logic test is always a comparison between two values. Comparison operators are used, for example,
to see if the first value is greater than or less than the second, or equal to it.
While the logic test section is limited to answering a true or false question, you have greater flexibility in
what you place in the last two arguments.
Leaving Cells Blank
Having an IF function return a blank cell is similar to having it return words or a text statement. You use
quotation marks as with text, but just don’t put anything between them.
=IF(A5 > 5000,”Too High”,” ”)
In this example, the IF function acts as a flag. If the value in cell A5 goes above 5,000, the warning “Too
High” is displayed in the cell. If A5 is not above 5,000, there is no need for a warning so the cell remains
blank.
Note: there is no comma separator in 5,000 in the above example. This is because the IF function uses
the comma to separate the three sections of the IF function contained within the round brackets Excel
will then give you an error message saying you have too many arguments in your function.
Nested IF Functions
A Nested IF function is when a second IF function is placed inside the first in order to test additional conditions. "Nesting" IF functions increase the flexibility of the function by increasing the number of possible outcomes.
For example, deductions from an employee’s income usually depend on employee income. The higher the income, the higher the deduction rate. We can use an IF function to determine what the deduction rate will be.
14
For this example, if employee income is:
less than $29,701, the deduction rate is 15%
greater than or equal to $29,701, but less than $71,950, the deduction rate is 25%
greater than or equal to $71,950, the deduction rate is 28%
The first deduction rate is handled by the logic test and the value if true argument of the first IF function. To do this, we write the beginning of the IF function as:
=IF(A5 < 29701, A5*15%,
To add the second and third deduction levels, we nest one IF function inside another. For example:
=IF(A5<29701,A5*15%,IF(A5<71950,A5*25%,A5*28%))
The logic test of the Nested IF function, checks to see if an employee’s income is greater than or equal to $29,701, but less than $71,950. If it is, the deduction rate is 25%. If the income is greater than or equal to $71,950, the deduction rate is 28%. Additional rate changes could be added another nested IF functions inside the existing function.
15
How to Trace Precedents and Dependents in Formulas
Excel 2010 formulas may contain precedents and may serve as dependents to other formulas.
Precedents are cells or ranges that affect
the active cell's value.
Dependents are cells or ranges affected
by the active cell.
Use the Trace Precedents and Trace
Dependents buttons in the Formula
Auditing group of the Formulas tab to
locate precedents or dependents for a
cell that contains a formula.
A cell often serves as both a precedent
and a dependent
Cells B2:B7 are precedents of B8, but at
the same time, cell B8 is dependent on all
the cells in B2:B7.
Cells B11:B16 are precedents of B17, but
at the same time cell B17 is dependent
on all the cells in B11:B16.
Cells B8 and B17 are precedents of E9, but at the same time cell E9 is dependent on cells B8 and B17.
Cell E9 is not a precedent for any other cell.
Understanding precedents and dependents of Excel formulas.
To see what other cells are referenced in the active
cell's formula, select the Trace Precedents button.
To see which other cells contain a reference to the
active cell, select the Trace Dependents button.
If you keep selecting the button, Excel will continue to go back (for precedents) or forward (for
dependents) one more reference. For instance, the first time you select Trace Precedents, Excel shows
you the direct precedents, those cells that are referenced by name in the formula. Select the button
again and Excel reveals the precedents of those precedents. Keep selecting, and Excel keeps showing
you how the cells are connected until you hit a range that contains values instead of formulas.
The Remove Arrows drop-down menu has three choices:
Remove Arrows
Remove Precedent Arrows
Remove Dependent Arrows
16
Correct an error value
If a formula cannot correctly evaluate a result, Excel displays an error value (see table below), each error type has different causes, and different solutions.
The following table contains links to articles that describe these errors in detail, and a brief description to get you started.
DESCRIPTION HOW TO CORRECT
##### Excel displays this error when a column is not wide enough to display all the characters in a cell, or a cell contains negative date or time values.
#DIV/0! Excel displays this error when a number is divided either by zero (0) or by a cell
that contains no value.
#N/A Excel displays this error when a value is not available to a function or formula.
#NAME? This error is displayed when Excel does not recognize text in a formula. For
example, a range name or the name of a function may be spelled incorrectly.
#NULL! Excel displays this error when you specify an intersection of two areas that do not intersect (cross). The intersection operator is a space character that separates references in a formula.
#NUM! Excel displays this error when a formula or function contains invalid numeric
values.
#REF! Excel displays this error when a cell reference is not valid. For example, you
may have deleted cells that were referred to by other formulas, or you may
have pasted cells that you moved on top of cells that were referred to by other
formulas.
#VALUE! Excel can display this error if your formula includes cells that contain different
data types. If error checking for formulas is enabled, the ScreenTip displays "A
value used in the formula is of the wrong data type." You can typically fix this
problem by making minor changes to your formula.
Correct common problems in formulas
You can implement certain rules to check for errors in formulas. These rules act like a spelling checker that checks for errors in data that you enter in cells. These rules do not guarantee that your worksheet is error free, but they can go a long way toward finding common mistakes. You can turn any of these rules on or off individually.
Errors can be marked and corrected in two ways: one error at a time (like a spelling checker), or immediately when they occur on the worksheet as you enter data. Either way, a triangle appears in the top-left corner of the cell when an error is found.
17
Cells with a formula error
You can resolve an error by using the options that Excel displays, or you can ignore the error by clicking Ignore Error. If you ignore an error in a particular cell, the error in that cell does not appear in further error checks. However, you can reset all previously ignored errors so that they appear again.
Turn error checking rules on or off
Click the File tab, click Options, and then click the Formulas category, under Error checking rules, select or clear the check boxes of any of the following rules:
If the references that are used in a formula are not consistent with those in the adjacent formulas, Excel displays an error.
Correct common formula errors one at a time
Select the worksheet that you want to check for errors. If the worksheet is manually calculated, press F9 to recalculate now.
On the Formulas tab, in the Formula Auditing group, click the Error Checking in-group button. The Error Checking dialog box is displayed when errors are found.
If you have ignored the errors once, Excel will not check for them when error checking is run unless you reset the error. This can be reset by clicking on the Error Checking command on the Formula Auditing group of the Formulas tab. Select Options on the Error Checking dialogue box and click on Reset Ignored Errors
on the Options dialogue box.
Click Next. If there are no further errors to be highlighted on the worksheet you can reset the Error Checking by selecting the file tab and selecting formulas in the Excel Options dialogue box. Continue until the error check is complete.
18
Mark common formula errors on the worksheet and correct them there
To correct an error in a worksheet, select a cell with a
triangle in the top-left corner of a cell, next to the cell, click
the Error Checking button that appears, and then click
the option that you want. The available commands differ
for each type of error, and the first entry describes the
error. To edit or evaluate the formula click on Show
Calculation Steps
If the underlined part of
the formula is a reference
to another formula, click
Step In to display the other
formula in the Evaluation
box. Click Step Out to go
back to the previous cell
and formula. The Step In
button is not available for a
reference the second time
the reference appears in
the formula, or if the
formula refers to a cell in a separate workbook.
Continue until each part of the formula has been evaluated and to see the evaluation again, click Restart. To end the evaluation, click Close. Some parts of formulas that use the IF and CHOOSE functions are not evaluated — in these cases, #N/A is displayed in the Evaluation box. If a reference is blank, a zero value (0) is displayed in the Evaluation box.
Evaluate a nested formula one step at a time
Sometimes, understanding how a nested formula calculates the final result is difficult because there are several intermediate calculations and logical tests. However, by using the Evaluate Formula dialog box, you can see the different parts of a nested formula evaluated in the order that the formula is calculated. For example, the formula =IF(AVERAGE(F2:F5)>50,SUM(G2:G5),0) is easier to understand when you can see the following intermediate results:
19
=IF(AVERAGE(F2:F5)>50,SUM(G2:G5),0) The nested formula is initially displayed. The AVERAGE
function and the SUM function are nested within the IF
function.
=IF(40>50,SUM(G2:G5),0) The cell range F2:F5 contains the values 55, 35, 45, and 25,
and so the result of the AVERAGE(F2:F5) function is 40.
=IF(False,SUM(G2:G5),0) Because 40 is not greater than 50, the expression in the
first argument of the IF function (the logical_test
argument) is False.
0 The IF function returns the value of the third argument (the
value_if_false argument). The SUM function is not
evaluated because it is the second argument to the IF
function (value_if_true argument), and it is returned only
when the expression is True.
Watch a formula and its result by using the Watch Window
When cells are not visible on a worksheet, you can watch those cells and their formula in the Watch Window. The Watch Window makes it convenient to inspect, audit, or confirm formula calculations and results in large worksheets. By using the Watch Window, you don't need to repeatedly scroll or go to different parts of your worksheet. This toolbar can be moved or docked like any other toolbar. For example, you can dock it on the bottom of the window. The toolbar keeps track of the following properties of a cell: workbook, sheet,
name, cell, value, and formula. You can have only one watch per cell.
Add cells to the Watch Window
On the Formulas tab, in the Formula Auditing group, click on the Watch Window command.
Click Add Watch and enter the cell reference or click on cell and Click Add. Move the Watch Window toolbar to the top, bottom, left, or right side of the window.
To display the cell that an entry in Watch Window toolbar refers to, double-click the entry.
Note Cells that have external referencesto other workbooks are displayed in the Watch Window toolbar only when the other workbooks are open.
20
Remove cells from the Watch Window
Open the Watch Window and select the cells that you want to remove. To select multiple cells, press
CTRL and then click the cells. Click Delete Watch .
Goal Seek
If you know the result that you want from a formula, but are not sure what input value the formula needs to get that result, use the Goal Seek feature. For example, suppose that you need to borrow some money. You know how much money you want, how long you want to take to pay off the loan, and how much you can afford to pay each month. You can use Goal Seek to determine what interest rate you will need to secure in order to meet your loan goal.
Goal Seek works only with one variable input value. If you want to accept more than one input value; for example, both the loan amount and the monthly payment amount for a loan, you use the Solver add-in.
Use Goal Seek to determine the interest rate
On the Data tab, in the Data Tools group, click What-If Analysis, and then click Goal Seek.
In the Set cell box, enter the reference for the cell that contains the formula that you want to resolve. In the example, this reference is cell B4.
In the To value box, type the formula result that you want. In the example, this is -900. Note that this number is negative because it represents a payment. In the By changing cell box, enter the reference for the cell that contains the value that you want to adjust. In the example, this reference is cell B3. The cell that Goal Seek changes must be referenced by the formula in the cell that you specified in the Set cell box, Click OK.
Goal Seek runs and produces a result, as shown in the following illustration.
21
Finally, format the target cell (B3) so that it displays the result as a percentage. On the Home tab, in the Number group, click Percentage. Click Increase Decimal or Decrease Decimal to set the number of decimal places
What if Analysis
Overview
What-if analysis is the process of changing the values in cells to see how those changes will affect the outcome of formulas on the worksheet.
Three kinds of what-if analysis tools come with Excel: scenarios, data tables, and Goal Seek. Scenarios and data tables take sets of input values and determine possible results. A data table works only with one or two variables, but it can accept many different values for those variables. A scenario can have multiple variables, but it can accommodate only up to 32 values. Goal Seek works differently from scenarios and data tables in that it takes a result and determines possible input values that produce that result. In addition to these three tools, you can install add-ins that help you perform what-if analysis, such as the Solver add-in.
Use scenarios to consider many different variables
A scenario is a set of values that Excel saves and can substitute automatically in cells on a worksheet. You can create and save different groups of values on a worksheet and then switch to any of these new scenarios to view different results.
For example, suppose you have two budget scenarios: a worst case and a best case. You can use the Scenario Manager to create both scenarios on the same worksheet, and then switch between them. For each scenario, you specify the cells that change and the values to use for that scenario. When you switch between scenarios, the result cell changes to reflect the different changing cell values.
Worst case scenario
Changing cells
Result cell
Best case scenario
Changing cells
Result cell
22
If several people have specific information in separate workbooks that you want to use in scenarios, you can collect those workbooks and merge their scenarios.
After you have created or gathered all the scenarios that you need, you can create a scenario summary report that incorporates information from those scenarios. A scenario report displays all the scenario information in one table on a new worksheet.
Sub totals in a list of data in a worksheet
You can automatically calculate subtotals and grand totals in a list for a column by using the Subtotal command. When you insert subtotals they are calculated with a summary, such as Sum or Average, by using the SUBTOTAL function. You can display more than one type of summary function for each column. Grand totals are derived from detail data not from the values in the subtotals. For example, if you use the Average summary function, the grand total row displays an average of all of the detail rows in the list, not an average of the values in the subtotal rows.
If the workbook is set to automatically calculate formulas, the Subtotal command recalculates subtotal and grand total values automatically as you edit the detail data. The Subtotal command also outlines the list so that you can display and hide the detail rows for each subtotal.
If you filter data that contains subtotals, your subtotals may appear hidden. To display them again, clear all filters.
Inserting subtotals
Make sure that each column in a range of data for which you want to calculate subtotals has a label in the first row, contains similar facts in each column, and that the range does not include any blank rows or columns.
Select a cell in the range. And either insert one level of subtotals or nested levels of subtotals, To insert a sub total On the Data tab, in the Outline group, click Subtotal.
23
The Subtotal dialog box is displayed.
In the At each change in box, click the column for the subtotals.
In the Use function box, click the summary function that you want to use to calculate the subtotals. In the Add subtotal to box, select the check box for each column that contains values that you want to subtotal. If you need to replace all current subtotals select the Replace current subtotals but remember that all sub totals will be replaced. Otherwise leave clear to retain all other subtotals. If you want an automatic page break following each subtotal, select the Page break between groups check box. To specify a summary row above the details row, clear the Summary below data check box. To specify a summary row below the details row, select the Summary below data check boxOptionally, you can use the Subtotals command again by repeating these steps to add more subtotals with different summary functions.
To display a summary of just the subtotals and grand totals, click the outline symbols next to the row numbers. Use the and symbols to display or hide the detail rows for individual subtotals.
Remove subtotals
Select a cell in the range that contains subtotals and on the Data tab, in the Outline group, click Subtotal and in the Subtotal dialog box, click Remove All.
24
Charts
Secondary Axis
When the values in a 2-D chart vary widely from data series to data series (secondary axes are not
supported in 3-D charts), or when you have mixed types of data, you can plot one or more data series
on a secondary vertical axis. The scale of the secondary vertical axis reflects the values for the
associated data series.
After you add a secondary vertical axis to a 2-D chart, you can also add a secondary horizontal axis,
which may be useful in a scatter chart or bubble chart.
To help distinguish the data series that are plotted on the secondary axis, you can change their chart
type. For example, in a column chart, you could change the data series on the secondary axis to a line
chart.
To complete the following procedures, you must have an existing 2-D chart.
Add a secondary vertical axis
You can plot data on a secondary vertical axis one data series at a time. To plot more than one data
series on the secondary vertical axis, repeat this procedure for each data series that you want to display
on the secondary vertical axis.
In a chart, select the data series that you
want to plot on the secondary vertical axis.
Select the Chart Tools Layout tab and in the
Current Selection group, select Format
Selection. On the Series Options choice,
under Plot Series On, select Secondary Axis
and then select Close.
A secondary vertical axis is displayed in the chart.
To change the display of the secondary vertical axis, on
the Layout tab, in the Axes group, select Axes.
Select Secondary Vertical Axis, and then select the
display option that you want.
To change the axis options of the secondary vertical
axis, do the following:
Right-click the secondary vertical axis and then select
Format Axis. Under Axis Options, select the options
that you want to use.
25
Add a secondary horizontal axis
To complete this procedure, you must have a chart that displays a secondary vertical
axis. Select a chart that displays a secondary vertical axis. On the Layout tab, in the
Axes group, select Axes.
Select Secondary Horizontal Axis, and then select the display option that you want.
Change the chart type of a data series
In a chart, select the data series that you want to change. You can right-click the data series, select Change Series Chart Type or on the Design tab, in the Type group, select Change Chart Type. In the Change Chart Type dialog box, select a chart type that you want to use. The first box shows a list of chart type categories, and the second box shows the available chart types for each chart type category. You can change the chart type of only one data series at a time. To change the chart type of more than one data series in the chart, repeat the steps of this procedure for each data series that you want to change.
Remove a secondary axis
Select the chart that displays the secondary axis that you want to remove. On the Layout tab, in the Axes group, select Axes, select Secondary Vertical Axis or Secondary Horizontal Axis, and then select None. You can also select the secondary axis that you want to delete, and then press DELETE, or right-select the secondary axis, and then select Delete.
Change the scale of the vertical (value) axis in a chart
By default, Excel determines the minimum and maximum scale values of the y axis, when you create a chart. However, you can customize the scale to better meet your needs. In a chart, select the value axis that you want to change, on the Format tab, in the Current Selection group, select Format Selection. In the Format Axis dialog box, select Axis Options, and then do one or more of the following: To change the number at which the vertical (value) axis starts or ends, for the Minimum or Maximum option, select Fixed and then type a different number in the Minimum box or the Maximum box. To change the interval of tick marks for the Major unit or Minor unit option, select Fixed and then type a different number in the Major unit box or Minor unit box.
26
To reverse the order of the values, select the Values in reverse order check box. When you change the order of the values on the vertical axis from bottom to top, the category labels on the horizontal axis flip from the bottom to the top of the chart. To change the display units on the value axis, in the Display units list, select the units that you want. To show a label that describes the units, select the Show display units label on chart check box. Changing the display unit is useful when the chart values are large numbers that you want to appear shorter and more readable on the axis. To change the placement of the axis tick marks and labels, select any of the options that you want in the Major tick mark type, Minor tick mark type, and Axis labels boxes. To change the point where you want the horizontal axis to cross the vertical axis, under Horizontal Axis Crosses, select Axis value, and then type the number that you want in the text box, or select Maximum axis value to specify that the horizontal axis crosses the vertical axis at the highest value on the axis. When you select Maximum axis value, the category labels are moved to the opposite side of the chart. Scatter charts and bubble charts show values on both the horizontal axis and the vertical axis, while line
charts show values on only the vertical axis. This difference is an important factor in deciding which
chart type to use. Because the scale of the line chart's horizontal axis cannot be changed as much as the
scale of the vertical axis that is used in the scatter chart, you might consider using a scatter chart instead
of a line chart if you have to change the scaling of that axis or display it as a logarithmic scale.
After changing the scale of the axis, you may also want to change the way that the axis is formatted.
Trendlines
Trendlines are used to graphically display trends in data and to analyze problems of prediction. Such analysis is also called regression analysis by using this; you can extend a trendline in a chart beyond the actual data to predict future values. For example, the following chart uses a simple linear trendline that is forecast ahead four quarters to clearly show a trend toward rising revenue:
Moving Average You can also create a moving average smoothes out fluctuations in data and shows
the pattern or trend more clearly.
Chart types that support trendlines You can add trendlines to data series in unstacked 2-D area, bar,
column, line, stock, scatter, and bubble charts. You cannot add trendlines to data series in 3-D, stacked,
radar, pie, surface, or doughnut charts. If you change a chart or data series so that it can no longer
support the associated trendline you lose the Trendlines.
27
Sparklines
Data presented in a row or column is useful, but patterns can be hard to spot at a glance. The context for these numbers can be provided by inserting Sparklines next to the data. Taking up a small amount of room, a Sparkline can display a trend based on adjacent data in a clear and compact graphical representation. Although it's not mandatory for a Sparkline cell to be directly next to its underlying data, it is a good practice.
You can quickly see the relationship between a Sparkline and its underlying data, and when your data changes you can see the change in the Sparkline immediately. In addition to creating a single Sparkline for a row or column of data, you can create several Sparklines at the same time by selecting multiple cells that correspond to underlying data, as shown in the following example.
You can also create Sparklines for rows of data that you add later by using the fill handle on an adjacent cell that contains a Sparkline.
These Sparklines use values from cells A6 through E6.
In cell F2 is a columns Sparkline and in cell F3 is a line Sparkline and in cell F6 a win/loss Sparkline.
Because a Sparkline is a tiny chart embedded in a cell, you can enter text in a cell and use a Sparkline as its background, as shown in the following picture.
In this Sparkline, the high value marker is green, and the low value marker is orange. All other markers are shown in black.
You can apply a colour scheme to your Sparkline’s by choosing a built-in format from the Style gallery which can be found on the Sparkline Tools Design tab. You can use the Sparkline Colour or Marker Colour commands to choose a colour for the high, low, first, and last values.
Create a Sparkline
Select an empty cell or group of empty cells in which you want to insert one or more Sparklines and on the Insert tab, in the Sparklines group, click the type of Sparkline that you want to create: Line, Column, or Win/Loss.
In the Data box, type the range of the cells, or click
and select cells that contain the data on which you want to base the Sparklines.
28
Show and customize axis settings
You can select Date Axis Type (in the Group group, click Axis) to format the shape of the chart in a Sparkline to reflect any irregular time periods in the underlying data.
In a line Sparkline, applying the Date Axis type can change the slope of a plotted line and the position of its data points in relation to each other.
In a column Sparkline, applying the Data Axis type can change the width of and increase or decrease the distance between the columns, as shown in the following image.
In the example shown here, there are two column Sparklines that use data from the same range. The Sparkline with the “Trend” label uses the General Axis type,
and the Sparkline with the “Trend (Data Axis Type)” label uses the Date Axis type. In each Sparkline, the first two data points are separated by two months, and the second and third are separated by seven months. By applying the Date Axis type, the space between the three columns changes proportionally to reflect the irregular time periods.
You can also use these Axis options to set minimum and maximum values for the vertical axis of a Sparkline or Sparkline group. Setting these values explicitly helps you control the scale so that the relationship between values is shown in a more meaningful way.
With the Sparkline or Sparkline group selected, in the Group group, click Axis. Under Vertical Axis Minimum Value Options or Vertical Axis Minimum Value Options, click Custom Value. Set minimum or maximum values that you feel will best emphasize the values in the Sparklines. You can increase the height of the row that contains the Sparkline to more dramatically emphasize the difference in data values if some are very small and some are very large.
You can also use the Plot Data Right-to-Left option to change the direction in which data is plotted in a Sparkline or Sparkline group.
Handle empty cells or zero values
You can control how a Sparkline handles empty cells in a range (and thus how the Sparkline is displayed) by using the Hidden and Empty Cell Settings dialog
29
box. This can be found in the Sparkline Tools Design tab and in the Sparkline group, select the Edit Data
command and from the drop down box select Hidden and Empty cells. Change settings as necessary.
Pivot tables/charts
Pivot Tables and charts allow you to manipulate the data to compare different data within the table.
The layout and comparisons can be set
and changed accordingly.
Before selecting data to produce the
pivot tables make sure there are no gaps
in the data.
Select the data and on the Insert tab and
in the tables group select the Pivot Table
command.
Create Pivot table window will appear.
The selected cells will appear in the
Table/Range box. You can then decide
where you will need the table to be
placed and select OK.
30
This will then enable you to use
the Pivot Table Field List that
opens on the right hand side of
the screen.
If you want to populate in a different way, just change the sequence.
In order to
summarize data by
showing Month field
first and then other
fields. Enable Month
field first and then
other fields.
31
For more filtering options, select on Row
Labels drop-down button, you will see
different options available to filter down and
summarize it in better way.
For creating a chart from a pivot table, go to
Insert tab, select Column select an appropriate
chart type. In this example we will create a
simple 3-D Column chart.
Excel will create chart out of your data. Now
resize it for a better view. Chart content can
be changed by using the options at the
bottom-left of its area.
If we want to view software apps developed
only in .NET platform, simply select Platform
button, and select .NET from the its options
and then Select Ok
Pivot Table and Chart will only show software
and month in which .NET platform is used for
development.
32
Sort data by multiple groups
Sometimes it is necessary to customise the sort within your worksheet.
On the Home Tab in the Editing group, select the Sort and filter command this will give you a drop down
list where you will need to select the custom sort command.
This will open the Sort dialogue box. In
the Column column select the column you
need to sort by first, then required values
and the order you need it to be sorted. If
you need to add levels to your sort, select
the Add level button at the top of the
dialogue box and add the different levels
as required.
33
If you need to sort by rows, select the options button and change to Sort left to
right. At this point you can select for the data to be case sensitive sorted
Slicers
What are slicers?
Slicers are easy-to-use filtering components that contain a set of buttons that enable you to quickly filter the data in a PivotTable report, without the need to open drop-down lists to find the items that you want to filter. When you use a regular PivotTable report filter to filter on multiple items, the filter indicates only that multiple items are filtered, and you have to open a drop-down list to find the filtering details. However, a slicer clearly labels the filter that is applied and provides details so that you can easily understand the data that is displayed in the filtered PivotTable report. Slicers are typically associated with the PivotTable in which they are created. However, you can also create stand-alone slicers that are referenced from Online Analytical Processing (OLAP) Cube functions, or that can be associated with any PivotTable at a later
time.
A slicer typically displays the following elements:
1. A slicer header indicates the category of the items in the
slicer.
2. A filtering button that is not selected indicates that the item is
not included in the filter.
3. A filtering button that is selected indicates that the item is
included in the filter.
4. A Clear Filter button removes the filter by selecting all items
in the slicer.
5. A scroll bar enables scrolling when there are more items than
are currently visible in the slicer.
6. Border moving and resizing controls allow you to change the
size and location of the slicer.
34
Using slicers
There are several ways to create slicers to filter your PivotTable data. In an existing PivotTable, you can:
Create a slicer that is associated with the PivotTable. Create a copy of a slicer that is associated with the PivotTable. Use an existing slicer that is associated with another PivotTable.
In addition to or instead of creating slicers in an existing PivotTable, you can also create a stand-alone slicer that can be referenced by Online Analytical Processing (OLAP) Cube functions or that you can associate with any PivotTable at a later time.
Because each slicer that you create is designed to filter on a specific PivotTable field, it is likely that you will create more than one slicer to filter a PivotTable report.
After you create a slicer, it appears on the worksheet alongside the PivotTable, in a layered display if you have more than one slicer. You can move a slicer to another location on the worksheet, and resize it as needed.
To filter the PivotTable data, you simply click one or more of the buttons in the slicer.
Formatting slicers for a consistent look
To create professional looking reports or simply to match the format of a slicer to the format of the associated PivotTable report, you can apply slicer styles for a consistent look. By applying one of the various predefined styles that are available for slicers, you can closely match the colour theme that is applied to a PivotTable. For a custom look, you can even create your own slicer styles, just as you create custom PivotTable styles.
Sharing slicers between PivotTables
When you have many different PivotTables in one report, such as a Business Intelligence (BI) report that you are working with, it is likely that you will want to apply the same filter to some or all of those PivotTables. You can share a slicer that you created in one PivotTable with other PivotTables. No need to duplicate the filter for each PivotTable!
35
When you share a slicer, you are creating a connection to another PivotTable that contains the slicer that you want to use. Any changes that you make to a shared slicer are immediately reflected in all PivotTables that are connected to that slicer. For example, if you use a Country slicer in PivotTable1 to filter data for a specific country, PivotTable2 that also uses that slicer will display data for the same country.
Slicers that are connected to and used in more than one PivotTable are called shared slicers. Slicers that are used in one PivotTable only are called local slicers. A PivotTable can have both local and shared slicers.
Create a slicer in an existing PivotTable
Click anywhere in the PivotTable report for which you want to create a slicer. This displays the PivotTable Tools. On the Options tab, in the Sort & Filter group, click Insert Slicer.
In the Insert Slicers dialog box, select the check box of the PivotTable fields for which you want to create a slicer and click OK. A slicer is displayed for every field that you selected.
In each slicer, click the items on which you want to filter. To select more than one item, hold down CTRL, and then click the items on which you want to filter.
Create a standalone slicer
On the Insert tab, in the Filter group, click Slicer.
2.
In the Existing Connections dialog box, in the Show box, either click All Connections to display all connections OR click Connections in this Workbook. To display only the recently used list of connections. OR click Connection files on this computer To display only the connections that are available on your computer.
36
To display only the connections that are available from a connection file that is accessed from the network, click Connection files on the Network.
If you do not see the connection that you want, you can create a connection. Click Browse for More, and then in the Select Data Source dialog box, click New Source to start the Data Connection Wizard so that you can select the data source that you want to connect to.
If you select a connection from the Connection files on the network or Connection files on this computer categories, the connection file is copied into the workbook as a new workbook connection, and is then used as the new connection information.
Under Select a Connection, click the connection that you want, and then click Open. Then in the Insert Slicer dialog box, click the check box of the fields for which you want to create a slicer and click OK. A slicer is created for every field that you selected.
Format a slicer
Click the slicer that you want to format, this displays the Slicer Tools, adding an Options tab. On the Options tab, in the Slicer Styles group, click the style that you want.
Make a slicer available for use in another PivotTable
Click the slicer that you want to share in another PivotTable, this displays the Slicer Tools, adding an Options tab.
On the Options tab, in the Slicer group, click PivotTable Connections and in the PivotTable Connections dialog box, select the check box of the PivotTables in which you want the slicer to be available.
Use a slicer from another PivotTable
Create a connection to the PivotTable that contains the slicer that you want to share by on the Data tab, in the Get External Data group, click Existing Connections
In the Existing Connections dialog box, in the Show box, make sure that All Connections is selected. If you do not see the connection that you want, you can create a connection by clicking Browse for More, and then in the Select Data
Source dialog box, click New Source to start the Data Connection Wizard so that you can select the data source that you want to connect to.
Select the connection that you want, and then click Open. In the Import Data dialog box, under Select how you want to view this data in your workbook, click PivotTable Report. Then click anywhere in the PivotTable report for which you want to insert a slicer from another PivotTable. This displays the PivotTable Tools, adding an Options and a Design tab. On the Options tab, in the Sort & Filter group, click the Insert Slicer arrow, and then click Slicer
Connections.
37
In the Slicer Connections dialog box, select the check box of the slicers that you want to use. Click OK. In each slicer, click the items on which you want to filter. To select more than one item, hold down CTRL, and then click the items that you want to filter. All PivotTables that share the slicer will instantly display the same filtering state.
Disconnect or delete a slicer
If you no longer need a slicer, you can disconnect it from the PivotTable report, or you can delete it.
To disconnect a slicer click anywhere in the PivotTable report for which you want to disconnect a slicer. This displays the PivotTable Tools, adding an Options and a Design tab.
On the Options tab, in the Sort & Filter group, click the Insert Slicer arrow, and then click Slicer Connections.
In the Slicer Connections dialog box, clear the check box of any PivotTable fields for which you want to disconnect a slicer.
Delete a slicer either click the slicer, and then press delete then right-click the slicer, and then click Remove <Name of slicer>.
38
Show Formulas
If you need to view numerous formulas at once you can select the Ctl and ` (key to the left of 1). You
will need to change the size of the column width. To change back to normal view use the same
combination of keys. Worksheets can be printed showing the formulas
Add a Comment
You can add comments to a worksheet cell to remind users and provide certain instructions, the
comment then pops up when the mouse cursor moves over the relevant cell. A cell with a comment has
a red triangle in the top right corner.
How to Add a Comment
Select the cell that you want to add a comment to and on the Review tab, in the Comments group, select New Comment. A new comment is created, and the pointer moves to the comment. An indicator appears in the corner of the cell.
In the body of the comment, type the comment text, select outside the comment box and the comment
box disappears, but the comment indicator remains. To keep the comment visible, select the cell and in
the Comments group, on the Review tab, select Show/Hide Comment or Show All Comments
When you sort data in a worksheet, comments are sorted together with the data. However, in
PivotTable reports, comments do not move with the cell when you change the layout of the report.
Edit/Format a Comment
Text in comments uses a default font which cannot be changed, but the text in each comment can be
formatted. You can also change the shape of a comment; for example, you can use an oval callout
instead of a rectangular comment.
Select the cell that contains the comment that you want to edit and on the Review tab, in the
Comments group, select Edit Comment (if the cell that you select does not have a comment this
command will not be available)
To change the comment double-click the text in the comment, and then in the comment text box, edit
the comment text.
To format the text select Edit Comment and highlight the narrative that you want to format and change
it using the method for any other text.
Move or Resize a Comment
Select the comment and resize using the sizing handles on the corners and side and move comment as
you would a shape or textbox.
39
Display or hide comments and their indicators
Excel displays an indicator only when a cell contains a comment (red triangle), which can be hidden by
selecting Excel Options, Advanced.
Review all comments in a workbook
On the worksheet, select the first cell that contains a comment that you want to review.
To review each comment, on the Review tab, in the Comments group, select Next or Previous to
view comments in sequence or reverse order.
Delete a comment
Select the cell that contains the comment that you want to delete and click delete in the Review tab and
in the Comments group.
40
Cell ranges
Naming areas of the worksheet will enable you to use the defined names as part of functions and as
navigation through the worksheet
On the Formulas tab and in the Defined names group select the Manage Name command.
Select on New
Type in a suitable name for the area and indicate the scope
of the workbook (specific sheets or whole workbook) and
comment on the area. Check that the name will refer to the
correct area and select ok.
All defined names will appear on the Name Manager
Dialogue box that are applicable.
A named range can be edited by selecting the relevant range in the Names Manager dialogue box and
selecting Edit.
41
Use of Defined Names
In the Total Marks cell the function will add up the total of
all values in the marks named area. The defined name is
used instead of the cell reference D2:D10
Navigation
Name Box
Once you have defined the names, you are able to use them to navigate
around large work books.
Select on the dropdown arrow on the Name Box and select from the list of
named areas. This will navigate you to the area selected.
This area has been
named as Marks.
42
Macros
To automate a repetitive task, you can quickly record a macro in Excel. After you create a macro, you can assign it to an object (such as a toolbar button, graphic, or control) so that you can run it by selecting the object.
Record a macro
When you record a macro, the macro recorder records all the
steps required to complete the actions that you want your macro
to perform. Navigation on the Ribbon is not included in the
recorded steps.
If the Developer tab is not available, Select the File tab and select
Options and select Customize Ribbon.
In the Customize Ribbon category, in the Main Tabs list, select the
Developer check box, and then select OK.
To set the security level temporarily to enable all macros
On the Developer tab, in the Code group, select Macro
Security.
Under Macro Settings, select Enable all macros (not
recommended, potentially dangerous code can run), and
then select OK.
If you do not have the Developer tab available contact the IT Department.
To help prevent potentially dangerous code from running, you are recommended to return to any one
of the settings that disable all macros after you finish working with macros.
On the Developer tab, in the Code group, select Record Macro or select the Record Macro button
at the bottom of the screen. In the Macro name box, enter a name for the macro.
43
The first character of the macro name must be a letter.
Subsequent characters can be letters, numbers, or
underscore characters. Spaces cannot be used in a
macro name; an underscore character works well as a
word separator. If you use a macro name that is also a
cell reference, you may get an error message that the
macro name is not valid. In the Description box, type a
description of the macro and select OK to start
recording.
Perform the actions that you want to record and on
the Developer tab, in the Code group, select Stop
Recording . You can also select Stop Recording on
the left side of the status bar.
Assign a macro to an object, graphic, or control
On a worksheet, right-click the object, graphic, or control to which you want to assign an existing macro,
and then select Assign Macro.
In the Macro name box, select the macro that you want to assign.
Assign a macro to the Quick Action Toolbar or to customize the ribbon
The Ribbon or Quick Access Toolbar can be customised in the normal way (See Page 2) and in the
Choose Commands From box select Macros. Select the destination in the Customise the ribbon box
.
44
You can further customise the button in the Quick Action
Toolbar by selecting Modify on the Excel Options dialogue box
and selecting from the available icons in the Modify Buttons
dialogue box.
Delete a macro
To delete the macro you can either, on the Developer tab, in
the Code group, select Macros and in the Macros list, select
the workbook that contains the macro that you want to
delete. OR in the Macro name box, select the name of the
macro that you want to delete and select Delete.
When saving a workbook that contains a macro change the Save As Type in the Save As dialogue box.
45
To Compare and Merge Workbooks:
Add the Compare and Merge Workbooks command to the Quick Access Toolbar (See page 2), as it is not
available on the ribbon.
Open a copy of the shared workbook. On the Quick Access Toolbar, select the
Compare and Merge Workbooks
command. If prompted, allow Excel to
save your workbook.
The Select Files to
Merge into Current
Workbook dialog box
will appear.
Select another copy of
the same shared
workbook that you
want to merge.
Selecting files to merge
into the current
workbook
Select OK.
The changes
from each copy
of the shared
workbook will
be merged into
a single copy. All
changes and
comments can
now be
addressed at
the same time.
Each colour represents changes from a different user, so you can tell at a glance who made the change
46
Track changes
You can use track changes to log details about workbook changes every time that you save a workbook. This change history can help you identify any changes that were made to the data in the workbook, and you can then accept or reject those changes. Track changes is especially useful when several users edit a workbook. It is also useful when you submit a workbook to reviewers for comments, and then want to merge the input that you receive into one copy of that workbook, incorporating the changes and comments that you want to keep.
How track changes works
Change tracking is available only in shared workbooks. In fact, when you turn on track changes, the workbook automatically becomes a shared workbook. Although a shared workbook is typically stored in a location where other users can access it, you can also track changes in a local copy of a shared workbook ie save it to your H drive..
When changes are made in the shared workbook, you can view the change history directly on the worksheet or on a separate, either way, you can instantly review the details of each change. For example, you can see who made the change, what type of change was made, when it was made, what cells were affected, and what data was added or deleted.
When you use track changes, you should consider:
Track changes differs from undo and backup, unfortunately, you cannot use the change history to back out of changes but the history worksheet includes a record of all deleted data so that you can copy that data back to the worksheet, you should therefore continue to back up workbooks that have track changes in effect.
Some types of changes are not tracked, changes that you make to cell contents are tracked, but other changes, such as formatting changes, are not tracked. Some Microsoft Excel features are unavailable in shared workbooks, and therefore cannot be tracked. See page 47 for list
When you turn on track changes, the change history is kept for 30 days to keep the size of the workbook manageable. However, you can increase or decrease the number of days of change history that you want to keep as needed. To keep the change history indefinitely, you can specify a large number of days. You can also make periodic copies of the history information. Any data that is passed the number of days stated will be deleted on closure of the workbook and when you turn off change tracking or stop sharing the workbook, all change history is permanently deleted.
Ways to use track changes
Onscreen highlighting Excel can outline changed areas in a different colour for each user and display the basic details as a comment when you rest the pointer over each changed cell. Onscreen highlighting is useful when a workbook does not have many changes, or you want to see at a glance what has changed.
History tracking Excel can display a separate history worksheet that provides a printable list of change details on which you can filterto find changes of interest. The history worksheet is useful when a workbook has many changes or you want to investigate what occurred in a series of changes.
Reviewing of changes Excel can step you through the changes in sequence so that you can decide whether to accept or reject each change. This method is useful when you are evaluating comments from other users.
47
UNTRACKED CHANGES ALTERNATIVES
Changed sheet names Sheet name changes are not highlighted on the sheet tabs, but
are tracked in the history worksheet.
Inserted or deleted worksheets Changes that are made to a worksheet after it is inserted are
tracked, but the insertion itself is tracked only in the history
worksheet.
Formatted cells or data None.
Hiding or unhiding of rows or columns None.
Additional or changed comments None.
Cells that change because a formula To find cells that change due to recalculation, you can use the calculates a new value auditing tools on the Formulas tab, in the Formula Auditing
group. Unsaved changes You can highlight changes as they are made, but the changes
appear in the history worksheet only after they are saved.
Turn on track changes for a workbook
On the Review tab, in the Changes group, click Share Workbook, in the dialogue box on the Editing tab select the Allow changes by more than one user at the same time check box.
Click the Advanced tab and under Track changes, click Keep change history for (defaulted at 30 days) and, in the days box, type the number of days of change history that you want to keep. Click OK and, if you are prompted to save the workbook, click OK to save the workbook.
48
Settings for Track Changes
When you highlight changes as you work, they are marked with a highlighting colour.
On the Review tab, in the Changes group, click Track Changes, and then click Highlight Changes. In the Highlight Changes dialog box, select the Track changes while editing check box. Selecting this check box shares the workbook and highlights changes that you or other users make. Under Highlight which changes, select the When check box and then, in the When list, click the option that you want. To specify the users for whom you want to
highlight changes, select the Who check box and then, in the Who list, click the option that you want. To specify the worksheet area where you want changes to be highlighted, select the Where check box and then, in the Where box, type the cell reference of the worksheet range. Make sure that the Highlight changes on screen check box is selected. Click OK. If you need the changes highlighted on screen select the check box and if you need the changes listed on a new sheet check that one.
Stop highlighting changes
On the Review tab, in the Changes group, click Track Changes, and then click Highlight Changes. In the Highlight Changes dialog box, clear the Track changes while editing check box. You can also turn off change tracking to stop and remove change highlighting. For more information, see the section Turn off change tracking for a workbook.
View tracked changes
To view the changes that have been made since switching track changes on, follow the instructions for
highlight changes as you work
Accept and reject changes
On the Review tab, in the Changes group, click Track Changes, and then click Accept or Reject Changes, if prompted to save the workbook, click OK. Select from the dialogue box which changes to accept or reject by activating the When, Who and When commands accordingly.
49
Click OK, and then review the information about each change in the Accept or Reject Changes dialog box, the information includes other changes that are affected by the action that you take for a change. The history worksheet records a rejection with "Undo" or "Result of rejected action" in the Action Type column. If prompted to select a value for a cell,
click the value that you want, and then click Accept, this must be completed prior to advancing to the next change. All further changes can be accepted or rejected by selecting Accept All or Reject All.
View the history worksheet
When setting up your track changes in the dialogue box select the List changes on a new sheet check box and Click OK. In the history worksheet, click the filter arrows next to the column labels to find the information that
you want. Saving the workbook hides the history worksheet. To view the history worksheet after saving, you must display it again by selecting the List changes on a new sheet check box in the Highlight Changes dialog box.
Track changing records changes that you make to cell contents, including changes that are caused by moving and copying of data. Row and column insertions and deletions are also included. However, Excel does not keep track of the following types of changes:
50
Turn off change tracking for a workbook
Turning off change tracking deletes the change history. To keep a copy of this information, on the Review tab, in the Changes group, click Track Changes, and then click Highlight Changes. Under Highlight which changes, select the When check box, and All from the check list. Clear the Who and Where check boxes and select the List changes on a new sheet check box, click OK. You can then either Print the
History or copy the history to another worksheet.
Password protection on worksheets/workbooks
Worksheet and workbook element protection should not be confused with workbook-level password security. Element protection cannot protect a workbook from users who have malicious intent. For an additional layer of security, you should help protect your whole workbook file by using a password. This allows only authorized users to view or modify data in the workbook. To prevent a user from accidentally or deliberately changing, moving, or deleting important data from a worksheet or workbook, you can protect certain worksheet or workbook elements, with or without a password, you can remove the protection from a worksheet as needed.
When you share a workbook with other users, you may want to protect data in specific worksheet or workbook elements to help prevent it from being changed. By default, when you protect a worksheet, all the cells on the worksheet are locked, and users cannot make any changes to a locked cell. However, you can specify which elements users will be able to change when you protect the worksheet.
Before you protect a worksheet, you can unlock the ranges that you want users to be able to change or enter data in. You can unlock cells for all users or for specific users. Select the cells you need to remain unlocked when the workbook is protected and on the Home tab, in the Font group, click the Format Cell Font dialog box launcher.
On the Protection tab, clear the Locked check box, and then click OK.
51
To protect your Worksheet
In the Review tab and in the Changes group select Protect Sheet
In the Allow all users of this worksheet to list, select the elements that you want users to be able to change and insert your password and click OK. You will be prompted to confirm your password and click OK.
Once you have protected the sheet/workbook the
command changes. To unprotect the worksheet/book,
click on the command to unprotect and enter the
password when prompted.
Protect elements in a shared workbook
If the workbook is already shared, and you want to assign a password to protect the sharing, you must
unshare the workbook. Firstly have all other users save and close the shared workbook to avoid losing
their work. Then open the workbook and select Protect and Share Workbook.
52
Print Screen (Screen Shot)
Click the worksheet that you want to add the
screenshot to. On the Insert tab, in the Illustrations
group, click Screenshot. Either add the whole
window by clicking the thumbnail in the Available
Windows gallery.
To add part of the window, click Screen Clipping,
and when the pointer becomes a cross, press and
hold the left mouse button to select the area of
your screen that you want to capture.
If you have multiple windows open, click the window you want to clip from before clicking Screen
Clipping. When you click Screen Clipping, the program you are working in is minimized and only the
window behind it is available for clipping.
The screenshot can be modified by using the Picture Tools tab to edit and enhance the screenshot.
53
General keyboard shortcuts
Use this shortcut To...
Press F1. Open Help
Press Ctrl+A. Select all content in a document, window, or text
box
Press F3. Search for a file or folder
Select the file or folder, press F2, Rename a file or folder
Select the file, and then press Alt+Enter. Find out when the file or folder was created, by
whom, and how big it is
Press Ctrl+Esc. Display the Start menu
Press Ctrl+Z. Undo an action
Press Ctrl+Y. Redo an action
Press F7. Check the spelling of titles or words in any Office
application with the Spelling & Grammar checker
Press Alt+Print Screen Capture a screen shot select paste position and
paste
Ctrl+Alt+Delete. Lock the computer, switch users, log off the
computer, change a password, start Task
Manager
Press the Windows logo key+L. Lock the computer
Press Alt+F4. Quit program
Press Ctrl+Home Select the first cell in the worksheet
Press Ctrl+End Select the last working cell of the worksheet
Accelerating Microsoft Excel
Use this shortcut To...
Press Ctrl+N. Open a new workbook
Press Tab, or press the Right Arrow key. Move left to right, cell by cell
Press Shift+Tab, or press the Left Arrow key. Move right to left, cell by cell
Press Enter, or press the Down Arrow key. Move down, cell by cell
Press Shift+Enter, or press the Up Arrow key. Move up, cell by cell
Press Ctrl+Shift+Down Arrow or Up Arrow. Move down or up to the last empty or non-
empty cell
Press Ctrl+Shift+Right Arrow or Left Arrow.Move to the last empty or
non-empty cell to the right or left
Press Backspace. Erase data in the current cell
Press Alt+Enter. Insert a return within a cell
Press HOME. Return to the beginning of the row
Ctrl+Page Down Advance to the next worksheet
54
Ctrl+Page Up Go to the previous worksheet
Press Ctrl+Semicolon (;). Enter the date
Press Ctrl+Shift+Colon (:). Enter the time
Press Alt+Apostrophe (‘). Find out about the style within the cell
Press Ctrl+1. Display the Format Cells dialog box
Press Ctrl+Shift+Tilde (~). Apply the general number format
Press Ctrl+Shift+Dollar Sign ($). Apply the currency number format
Press Ctrl+Shift+Percent (%). Apply the percentage number format
Press Ctrl+Shift+Ampersand (&). Apply a border
Press Ctrl+Shift+ underscore (_). Remove a border
Press Ctrl+0 (zero). Hide the selected columns
Press Ctrl+9. Hide the selected rows
Press Ctrl+Shift+opening parenthesis. Unhide hidden rows within a selection