Additives for Polymers E - Melrobmelrob.com/wp-content/uploads/e_brochure_additives_for_polymers.… · Additives for Polymers ... MP: 51-64°C Recommendations General purpose antioxidant

EAdditives for Polymers

Polymer Additives Group

ADEKA PALMAROLE SAS was founded in September 2000 as a joint venture between theADEKA Corporation of Japan (90 %) and the PALMAROLE Group of Switzerland (10 %).

ADEKA is a major chemicals and food company with a worldwide turnover in excess of €1 billionper year. The polymer additives division forms a strategic and important business for ADEKA.

ADEKA is a global company with polymer additives business organisations in Japan, Korea,Taiwan, Thailand, Singapore, China, India, USA, UAE and Europe.

With headquarters located in France, close to Mulhouse-Basel airport, ADEKA PALMAROLEoffers an extensive range of ADEKA Polymer Additives throughout Europe, CIS countries,Middle East and Africa.

In complement to the global ADEKA products (ADK STAB, ADK CIZER) which include commodityand specialty additives, ADEKA PALMAROLE offers a local portfolio under the PALMAROLEtrade name, which includes a range of additives formulations (one-packs) produced in ourRousset plant in South of France. Local production includes blowing agents, engineeringthermoplastic compounds (mostly on a toll compounding basis) as well as PVC stabilizers.

ADEKA has always been committed to maintain its well-established reputation by bringingto the plastic industry, new additives and innovative solutions, which help to fulfil the increasingdemand for stabilisation driven by the environmental regulations and requirements.

ADEKA always maintains high quality and production standards combined with a strongfocus on customer service. All ADEKA plants are certified ISO 9001 and ISO 14001.

About Us

ADK STAB AO-30 White powderMW: 544.8

MP: 184-185°C

RecommendationsHighly effective antioxidant for processing and long term stabilities. Highly extraction resistant and shows excellent synergy with thioethers.Suitable for Polyolefins, ABS, various rubbers and other polymers.

ADK STAB AO-40 White powderMW: 382.6

MP: 210-214°C

RecommendationsHigh performances antioxidant for engineering plastics and elastomers.It has an excellent solubility and is highly effective in polyamides.

ADK STAB AO-50 PowderADK STAB AO-50F Flakes

MW: 531MP: 51-64°C

RecommendationsGeneral purpose antioxidant recommended for all plastics and rubbers.

ADK STAB AO-60 White powderADK STAB AO-60RG Pellets form

MW: 1178MP: 110-130°C

RecommendationsGeneral purpose antioxidant suitable for all plastics.

ADK STAB AO-80 White powderMW: 741

MP: 110-120°C

RecommendationsHigh performance antioxidant having low volatility, excellent synergy with phosphites and thioethers and excellent gas fading resistance.Recommended for engineering plastics and for PP fibers.

Palmarole AO.OH.98 White powderMW: 636.9

MP: 156-161°C

RecommendationsEffective antioxidant suitable mainly for polyamides.

Palmarole AO.OH.330 White powder

MW: 775.2

MP: 240-245°C

RecommendationsEffective phenolic antioxidant for plastics with high extraction resistance.

Antioxidants - Phenolics

ADK and Palmarole Products Characteristics Chemical StructureCAS Number

1

Palmarole AO.OH.570 Light yellow powderPalmarole AO.OH.570RG Pellets form

MW: 586.9MP: 76-79°C

RecommendationsEffective phenolic antioxidant suitable for POM, Styrenics and PVC.

Palmarole AO.OH.783 White powderPalmarole AO.OH.783RG Pellets form

MW: 783MP: 220-222°C

RecommendationsEffective phenolic antioxidant. Antioxidant for Polyolefins applications.It has low volatility and shows low discolouration. It shows synergy with thioethers and light stabilisers used for long term weatherability.Suitable for polyolefins (particularly PP fibers), styrenics and other polymers.

ADK STAB 1178 Clear pale yellow liquidMW: 689

Viscosity ca.4000 mPa.s

RecommendationsGeneral purpose liquid phosphite antioxidant.

ADK STAB TPP Clear liquidMW: 310


RecommendationsADK STAB TPP is a good heat and color stabiliser. It is recommended for PU and Rubbers.



RecommendationsADK STAB 1500 offers excellent thermal and color stability for ABS and PVC.

ADK STAB 135A Clear liquidMW: 375


RecommendationsADK STAB 135A is recommended for ABS, PVC and engineering plastics where it offers high heat and color stability.



RecommendationsADK STAB 3010 is recommended for high processing temperatures applications.It is suitable for ABS and engineering plastics.

ADK STAB 517 Clear pale yellow liquidMW : 439

Viscosity: 16 mPa.s (25oC)

RecommendationsADK STAB 517 offers a good thermal and color stability for PVC, Styrenics, PU and Rubbers.


Antioxidants - Phosphites

2

(CAS number : 36443-68-2)

O P O

2

(CAS number : 25550-98-5)

ADK STAB 2112 White powderADK STAB 2112RG Pellets form

MW: 647MP: 180-190°C

RecommendationsGeneral purpose processing stabiliser for all plastics.

ADK STAB PEP-8T White flakeMW: 733

MP: 40-62°C(Softening point)

RecommendationsGood processing stabiliser which provides high color stability in all polymers.

ADK STAB PEP-8HT White flakeMW: 733

MP: 100-130°C(Softening point)

RecommendationsGood processing stabiliser which provides high color stability in all polymers.

ADK STAB PEP-24G White granule and powderMW: 604.7

MP: 160-175°C

RecommendationsGood processing stabiliser which provides high color stability.

ADK STAB PEP-36 White powderMW: 632.8

MP: 234-240°C

RecommendationsHigh performances processing stabiliser suitable for polyolefins, styrenics, engineering plastics and other polymers.ADK STAB PEP-36 has high resistance to hydrolysis, high thermal stability and provides high color and high melt stability.ADK STAB PEP-36 is recommended for high processing temperatures applications.

ADK STAB HP-10 White powderMW: 583

MP: 146-149°C

RecommendationsADK STAB HP-10 provides excellent color and melt stability during polymer processing as well as good hydrolytic stability and solubility/compatibility in polyolefins. ADK STAB HP-10 is suitable for polyolefins, styrenics such as ABS, SBS, SEBS rubbers and other polymers.

ADK STAB A-611 White powder ADKSTAB AO-60 / ADKSTAB 2112 (1/1)ADK STAB A-611RG Pellets form

MP: 110-190°CRecommendationsSynergistic antioxidants blends suitable for processing and long term thermal stabilisation for all plastics.


MP: 110-190°C

RecommendationsSynergistic antioxidants blends suitable for processing and long term thermal stabilisation for all plastics.


MP: 110-190°C



(CAS number : 126050-54-2)

CH2

O

O

P O C8H17

Binary Blends

3

ADK STAB A-514 White powder ADKSTAB AO-50 / ADKSTAB 2112 (1/4)MP: 51-185°C


ADK STAB AO-412S White powderMW: 1162

MP: 46-52°C

RecommendationsADK STAB AO-412S is a highly effective high molecular weight thioether antioxidant.It has low volatility and good compatibility with a wide range of polymers.ADK STAB AO-412S is very effective and show high synergism with processing stabilisers. It provides long term high thermal stability.It is suitable for polyolefins, especially high heat resistance filled systems, styrenics, engineering plastics and other polymers.

ADK STAB AO-26 Pale yellow liquid Proprietary MixtureViscosity: 2120mPa.s at 25°C

RecommendationsHighly effective and highly compatible antioxidant in cross-linked PE.It is also suitable for PUR, EPDM rubbers and other polymers.

ADK STAB CDA-1 White powder

MW: 204.2

MP: 315-325°C

RecommendationsADK STAB CDA-1 is an excellent metal deactivator.Non discoloring and suitable for polyolefins, ABS and other polymers.

ADK STAB CDA-6 White powder MW: 498.6

MP: 209-215°C

RecommendationsADK STAB CDA-6 is a high molecular weight, highly effective metal deactivator.Non discoloring and suitable for polyolefins, ABS and other polymers.

Palmarole MDA.P.10 Slightly yellow powder Palmarole MDA.P.10RG Pellets form

MW: 552.8MP: 224-229°C

RecommendationsGeneral purpose metal deactivator.

Palmarole MDA.P.11 Slightly yellow powder Palmarole MDA.P.11RG Pellets form

MW: 664.9MP: 175-187°C

RecommendationsHigh performance, multipurpose metal deactivator.


Sulfur Synergists

4

Metal Deactivators

ADK STAB LA-12 White powderMW: 438.7

MP: 195-197°C

RecommendationsADK STAB LA-12 is used for UV protection of coatings, adhesives & sealants, polyurethanes, TPU.ADK STAB LA-12 could be used in polyolefins, engineering plastics and other resins.

ADK STAB LA-31RG Pale yellow free flowing formADK STAB LA-31G Granulated form

MW: 659MP: 194-200°C

RecommendationsHigh molecular weight benzotriazole UVA.ADK STAB LA-31 has low volatility at high processing temperatures.Because of its high compatibility, ADK STAB LA-31 is highly effective in Polycarbonates, ABS, Nylons, Polyesters and other engineering plastics.

ADK STAB LA-46 Pale yellow powderMP: 109-110°C

RecommendationsADK STAB LA-46 is a triazine based high performing UVA with high thermal, high color stability and low volatility.ADK STAB LA-46 is suitable for PC where its performances for mainly thin applications are excellent.ADK STAB LA-46 is suitable for protection of various polymers, particularly in PC, PET, PBT and PMMA.ADK STAB LA-46 could also be used in combination with HALS, for photo stabilization of polyolefins.

Palmarole LS.BO.013 Slightly yellow crystalline powder

MW: 228.3MP: 63-64°C

RecommendationsPALMAROLE LS.BO.013 is used as a polymer additive to prevent the degradation by UV light of polymers such as PVC and binders in certain coatings formulations such as wood varnishes.

Palmarole LS.BO.087 Slightly yellow crystalline powder MW: 326.4

MP: 48-49°C

RecommendationsPALMAROLE LS.BO.087 is used as a UV absorber for the protection a wide range of polymers including PP, PE, PVC, acrylics, PC, EVA and polyesters.PALMAROLE LS.BO.087 shows particular benefits when used in LDPE, LLDPE and EVA film applications and particularly in LDPE greenhouse films.

Palmarole LS.BT.080 White to off-white powder MW: 323.4

MP: 103-105°C

RecommendationsPALMAROLE LS.BT.080 is an effective UV absorber in a variety of polymers but finding use mainly in styrenics, PVC, polyesters, acrylic polymers, polycarbonate and PVB.

Palmarole LS.BT.100 Slightly yellow powder MW: 225.3

MP: 128-132°C

RecommendationsPALMAROLE LS.BT.100 is an effective UV absorber for a variety of polymers but is used mainly in styrenics, PVC, polyesters, acrylic polymers, acetals and cellulose esters.

Palmarole LS.BT.141 Slightly yellow powder MW: 316

MP: 138-141°C

RecommendationsPALMAROLE LS.BT.141 is an effective UV absorber in a variety of polymers and is used mainly in PP, PE, PVC and polyesters.


UV Absorbers

(CAS number : 131-57-7)

5

Palmarole LS.BT.550 Light yellow powder MW: 351.5

MP: 79-87°C

RecommendationsPALMAROLE LS.BT.550 is an effective UV absorber for a broad range of polymers.It is used in polyolefins, PVC, polyesters, polycarbonate, polyamides and polymeric binders for coatings.

Palmarole LS.BT.990 Light yellow powder MW: 447.6

MP: below 140°C

RecommendationsPalmarole LS.BT.990 is suitable for PA, PMMA, POM, Rigid PVC, TPE compounding and rubber.

ADK STAB LA-402AF White to pale yellow pellet Proprietary MixtureMP: over 120°C

RecommendationsADK STAB LA-402AF is a light stabilizer concentrate (50% in polyolefins) based on secondary HALS intended for use in filled and pigmented formulations.Highly effective in filled and/or pigmented polypropylene articles such as automotive interior and exterior parts.ADK STAB LA-402AF provides a high level of protection against UV degradation, causes no mold staining during processing and shows less blooming and fogging than conventional low-molecular-weight HALS.

ADK STAB LA-52SC Pale yellow powder

MW of active ingredient: 847

Softening point: > 120°C

MP: over 65°C

RecommendationsADK STAB LA-52SC is a highly effective light stabilizer based on a mid range molecular weight light stabilizer.ADK STAB LA-52SC is a tertiary amine HALS that shows high resistance against blooming and fogging.ADK STAB LA-52SC is suitable for polyolefins, styrenics and other polymers.

ADK STAB LA-57 White powderMW: 791

MP: 125-135°C

RecommendationsADK STAB LA-57 mid-range molecular weight HALS offering a high light stability.ADK STAB LA-57 could be used in polyolefins, ABS and other polymers.

ADK STAB LA-502 Pale yellow powder Proprietary MixtureMP: 50-70°C

RecommendationsADK STAB LA-502 is a highly effective light stabiliser system based on a methylated HALS.ADK STAB LA-502 based system shows a high resistance against blooming and fogging.ADK STAB LA-502 is suitable for Polyolefins, Styrenics and other polymers. It shows excellent light stability in filled and/or pigmented PP as well as in TPO applications.

ADK STAB LA-63 Pale yellow powderADK STAB LA-63FL Flakes

MW: 2000MP: 85-105°C

RecommendationsADK STAB LA-63 is a highly effective, high molecular weight HALS that provides.Excellent long term light stability.ADK STAB LA-63 suitable for Polyolefins, Styrenics, Sealants and other polymers.

ADK STAB LA-81 Pale yellow liquid Liquid HALS

RecommendationsADK STAB LA-81 is a "Third generation" HALS that provides high resistance against photo-degradation of polymers in contact with acids or in strongly acidic environments.ADK STAB LA-81 is suitable for protection of Polyolefins, PVC, Styrenics, Acrylics and is particularly recommended for LDPE, LLDPE, PP.ADK STAB LA-81 is especially recommended for agricultural PE films used under high acidic and sulfur conditions.


(CAS number : 64022-61-3)

HALS

6

Palmarole HALS 92 Pale yellow liquid

RecommendationsGeneral purpose liquid HALS suitable for a variety of paints and coatings systems.

Palmarole HALS 77G White crystalline solidMW: 480.7

MP: 81-85°C

RecommendationsGeneral purpose low molecular weight HALS suitable for polyolefins, engineering plastics, styrenics and other polymers.

Palmarole HALS 62 Colorless to light yellow beadsMP: 55-77°C

RecommendationsOligomeric HALS suitable for polyolefins and other polymers. It is recommended for films and sheets applications.

Palmarole HALS 94 White to light yellow granuleMP: 100-135°C

(Softening range)

RecommendationsHigh molecular weight HALS suitable for a variety of polymers and applications.

Palmarole STAT N Powder Polyoxy-ethylene-alkylamine-fatty-acid -esterGMS: 38-42%

MP: 58°CRecommendationsGeneral purpose antistatic agent.

Palmarole STAT N-90 Ivory white beads Polyoxy-ethylene-alkylamine-fatty-acid -ester

MP: 65°C

RecommendationsGeneral purpose antistatic agent.

Palmarole STAT N-45 Waxy solid Polyoxy-ethylene-alkylamine-fatty-acid -esterGMS: min 45%

MP: 58°CRecommendationsGeneral purpose antistatic agent.

Palmarole HT White fine powder Aluminium magnesium hydroxyl carbonate(CAS number: 11097-59-9)

RecommendationsHighly effecient acid neutraliser recommended for polyolefins and used as thermal stabiliser for PVC and other polymers containing halogenated flame retardants.


N N

N

NH

CH2

NH

N

NH

N

n

(CAS number : 71878-19-8)

(CAS number : 52829-07-9)

OO (CH2)8NH

OO NH

(CAS number : 65447-77-0)

NOH CH2CH2O CH2 CH2

OO

O CH3

n

Antistatic Agents

Acid Neutralisers

7

N O C8H16CH3

O

N CH3O

O

N O C8H16CH3

O

CH3O

O

(CAS numbers : 41556-26-7, 82919-37-7)

ADK STAB FP-600 Colourless viscous liquidViscosity: over 20000mPa.s at 25°C

RecommendationsADK STAB FP-600 is a high molecular weight, liquid phosphate ester flame retardant that can impart excellent flammability performance together with good processing properties.ADK STAB FP-600 can be used in a wide range of polymer systems especially in engineering plastics where the advantage of lower volatility is required.ADK STAB FP-600 shows lower vapor emission during processing, low mould deposits, low generation of toxic gases. ADK STAB FP-600 is hydrotically stable and due to its plasticising effect, it shows improved flow characteristics and helps to maintain a good level of mechanical performances and HDT.ADK STAB FP-600 is suitable for polymer blends such as PC/ABS, and PC/HIPS and is also recommended for use in sealants.

ADK STAB FP-800 Slightly yellow powder MP: 65-85°C

RecommendationsADK STAB FP-800 is a high molecular weight, solid phosphate ester flame retardant which can impart excellent flammability performance as well as good processing properties to polymers.ADK STAB FP-800 can be used in a wide range of polymers and polymers systems and particularly in engineering plastics such as polycarbonates and polyesters. Because of its high effeciency at low dosing levels, FP-800 helps to keep a good level of physical/mechanical properties.ADK STAB FP-800 has an excellent thermal stability, high processing and hydrolytic stabilities, shows low toxic gases production and shows no generation of dioxins during combustion.

ADK STAB FP-2100J White powder Proprietary MixtureMP: over 270°C

RecommendationsADK STAB FP-2100J is a nitrogen/phosphorus-based, halogen free flame retardant for polyolefins.ADK STAB FP-2100J is an intumescent system showing good flame retardancy with retention of mechanical properties.ADK STAB FP-2100J shows excellent flame retardancy and high thermal and processing stability in most thermoplastics. It shows also excellent colour stability and good water resistance.ADK STAB FP-2100J is recommended for polypropylene, homo- and copolymers, high and low density polyethylene and ethylene vinyl acetate copolymers.

ADK STAB FP-2200S White powder Proprietary MixtureMP: over 270°C

RecommendationsADK STAB FP-2200S is a nitrogen/phosphorus-based, halogen free flame retardant for polyolefins.ADK STAB FP-2200S is an intumescent system showing good flame retardancy with retention of mechanical properties.ADK STAB FP-2200S shows excellent flame retardancy at lower dosing levels and high thermal and processing stability in most thermoplastics.It shows also excellent colour stability and a good water resistance.ADK STAB FP-2200S is recommended for polypropylene, homo- and copolymers, high and low density polyethylene and ethylene vinyl acetate copolymers.

ADK STAB NA-05 White powder Proprietary MixtureMP: 360°C

RecommendationsADK STAB NA-05 is nucleating agent designed for Polyesters. It is recommended for PET and PBT.ADK STAB NA-05 improves significantly crystallization temperatures and mechanical performances.It offers high gloss and helps to reduce warpage for GF-PET.It is recommended films, fibers, bottles and injection molding applications.

ADK STAB NA-11UH White powderMW: 508.6

MP: over 400°C

RecommendationsADK STAB NA-11UH is an excellent nucleating agent that provides excellent mechanical and physical performances. It improves flexural modulus, crystallisation temperature, HDT, surface hardness and improves transparency in semi-crystalline polymers and particularly PP.ADK STAB NA-11UH has excellent extraction resistance with no plate out or odor issues during processing or in the final article.ADK STAB NA-11UH is suitable for polyolefins and other polymers.


Flame retardants

Nucleating andClarifying Agents

8

(CAS number : 85209-91-2)

ADK STAB NA-21 White powder Proprietary MixtureMP: over 210°C

RecommendationsADK STAB NA-21 is unique clarifying and nucleating agent that improves clarity, crystallisation temperature, HDT and other physical properties of semi-crystalline polymers and especially PP.ADK STAB NA-21 is effective at low concentrations for good organoleptic performance and excellent stiffness and clarity enable lightweighting of thin walled articles.ADK STAB NA-21 is recommended for polyolefins, mainly PP.

ADK STAB NA-27 White powder Proprietary Mixture

RecommendationsHigh performances nucleating system used & recommended for PP Homo- and Bloc polymers.

ADK STAB NA-71 White powder Proprietary MixtureMP: over 210°C

RecommendationsADK STAB NA-71 is unique clarifying and nucleating agent that improves clarity, crystallisation temperature, HDT and surface gloss of semi-crystalline polymers.Having a high thermal stability, ADK STAB NA-71 improves also crystallisation temperature, HDT and physical properties of semi-crystalline polymers.ADK STAB NA-71 effective at low concentrations for good organoleptic performance and excellent stiffness and clarity enable lightweighting of thin walled articles.ADK STAB NA-71 is recommended for polyolefins, mainly PP but is also effective in engineering plastics including sustainable biopolymers.

ADK STAB NA-806 White powder Proprietary Mixture

RecommendationsADK STAB NA-806 is a high performances clarifying system recommended for PP Homo, PP-Bloc and PP-Random.ADK STAB NA-806 is very effective at low concentrations and at low processing temperatures for a broad range of MFR.ADK STAB NA-806 shows low haze values, high transparency, high gloss & high mechanical performances.

Palmarole MI.NA.08 White powderMW: 144.1

MP: 410-430°CRecommendationsPalmarole MI.NA.08 is an effective nucleating agent that improves physical and mechanical performances of polymers, particularly PP. Palmarole MI.NA.08 is available as a fine, free flowing powder for optimum dispersion.

Palmarole MB.NA.05 White granulaMasterbatch of 10% of ADK STAB NA-11 and 90% of H-PP (MFR 10)

RecommendationsPalmarole MB.NA.05 is an excellent nucleating agent that provides excellent mechanical and physical performances. It improves flexural modulus,crystallisation temperature, HDT, surface hardness and improves transparency in semi-crystalline polymers and particularly PP.Palmarole MB.NA.05 has excellent extraction resistance with no plate out or odor issues during processing or in the final article.Palmarole MB.NA.05 is suitable for polyolefins and other polymers.

Palmarole MB.NA.07 White granulaMasterbatch of 10% of ADK STAB NA-21 and 90% of H-PP (MFR 10)

RecommendationsPalmarole MB.NA.07 is unique clarifying and nucleating agent that improves clarity, crystallisation temperature, HDT and other physical properties of semi-crystalline polymers and especially PP.Palmarole MB.NA.07 is effective at low concentrations for good organoleptic performance and excellent stiffness and clarity enable lightweighting of thin walled articles.Palmarole MB.NA.07 is recommended for polyolefins, mainly PP.

ADK STAB MBA blends Melt blends Additives

RecommendationsHigh quality Additives blends for polyolefins, engineering plastics and other polymers.

ADK STAB CB blends Compacted blends of Additives

RecommendationsHigh quality Additives blends for polyolefins, engineering plastics and other polymers.


Tailor Made Additives Blends

9

Palmarole BA.H.02 Endothermic White powderPalmarole BA.H.02F Decomposition T°: 130°-140°C

RecommendationsFor synthetic corks applications in PE and TPE resins - For flexible PVC formulations for caps seals applications.

Palmarole BA.H.03 Endothermic White powderDecomposition T°: 140°-150°C

RecommendationsFor rigid foam PVC applications in combination with exothermic powder.

Palmarole BA.H.04 Endothermic White powder

RecommendationsFor direct gassing PE and PS foamed sheets process.

Palmarole BA.H.07 Endothermic White powderDecomposition T°: 190°- 200°C

RecommendationsFor decorative ribbons PP applications.

Palmarole BA.M2.E Endothermic Masterbatch (20 % active material) on LDPE Carrier

RecommendationsFor PE and PP sink marks removal applications in injection molding.

Palmarole BA.M4.E.MG Endothermic Masterbatch (40 % active material) on LDPE Carrier under micro granules form

RecommendationsFor synthetic corks applications in PE and TPE resins.

Palmarole BA.M7.E Endothermic Masterbatch (20 % active material) on LDPE Carrier

RecommendationsFor weight reduction of PE/PP large molded parts.

Palmarole BA.F2.E Endothermic Masterbatch (20 % active material) on LDPE Carrier

RecommendationsFor PE and PP sink marks removal applications in injection molding applications.

Palmarole BA.F4.E.MG Endothermic Masterbatch (40 % active material) on LDPE Carrier

RecommendationsFor direct gassing PE foamed sheets and profiles process - For foamed PE/PP profiles and pipes by standard extrusion process.

Palmarole BA.F2.S Endothermic Masterbatch (20 % active material) on copolymer Carrier

RecommendationsFor sink marks removal applications in PS and ABS parts molded by injection process.

Palmarole BA.F4.S Endothermic Masterbatch (40 % active material) on copolymer Carrier

RecommendationsFor direct gassing PS foamed sheets, profiles and boards process.

Palmarole MB.BA.01 Exothermic Masterbatch (50 % active material) on PE Carrier

RecommendationsFor weight reduction of molded parts in PA, PBT, PET, PPO resins.

Palmarole MB.BA.10 Endo/Exo Masterbatch (45 % active material) on acrylates Carrier

RecommendationsFor foamed rigid PVC profiles, sheets and boards applications.

Palmarole MB.BA.15 Endothermic Masterbatch (15 % active material) on LDPE Carrier

RecommendationsFor decorative ribbons PP applications in extrusion process. For sink marks removal in PP applications in Injection molding process.


10

Blowing Agents Powders

Blowing AgentsMasterbatches

Documents

Additives for Polymers E - Melrobmelrob.com/wp-content/uploads/e_brochure_additives_for_polymers.… · Additives for Polymers ... MP: 51-64°C Recommendations General purpose antioxidant