tripleTHE GERMAN CONNEC TION

► Designed to charge the turbo system with alow pressure of regulated workshop air to showthe presence of leaks within the system

► Professional and economic troubleshootingsafety valve prevents applying to much pressure

► Features a pressure gauge, shut of valve andpressure release valve

► Can also be used on cooling system hoses,Turbochargers , Ghargers

► Universal use to fit on all charging systems

1143 LEAKAGE TESTER fOR ENGINE CHARGING SYSTEMS

1128 dRAAG ARM SUSPENSIONARM LEVER

556 WARRIOR HOSE

555 WARRIOR HOSE (INC. fITTING)

► All parts manufactured fromchrome vanadium steel

► Hardness and torque inaccordance with DIN - “superlock“ sockets

► 3 fine 72 tooth reversibleratchets - 1/4“, 3/8“ and 1/2“ drive

De

sig

n b

y M

ac

c D

esi

gn

/ w

ww

.ma

cc

de

sig

n.c

o.u

k

► Designed to support the engine or gearboxwhen the engine bracket has been removedeg - when replacing timing belts, drive belts,water pumps etc

► Removes the need for using cranes,transmission jacks etc

► Universal tool designed for all makes ofvehicle

► The unit is suspended from the chassis viathe support hooks, the engine / gearbox issupported by the support pad, and is counter-balanced against the underside of the vehicleby the support arms

► Supplied with a range of 8 automatic transmission fluid adaptors

► Delivers approximately 70ml per stroke

► Features a fluid control valve andadaptor stowage to minimise oilleakage when not in use

► Includes return flow function

► Capacity tank 9 Ltr

TOOLS

1039 72MM AUdI A1, AUdI A2, SEAT CORdOBA, IBIzA, SKOdAfABIA, ROOMSTER, VW POLO (fRONT), VW fOX WITH PAS (fRONT)

1044 78MM fORd fOCUS II, C-MAX, VOLVO C30, C70, S40, V50(fRONT), MAzdA 3

11165 82MM fORd MONdEO, GALAXY, S-MAX, LANd ROVERfREELANdER 2, VOLVO S80, V70, XC60, XC70

1132 85MM VW MULTIVAN, TOUAREG, TRANSPORTER(fRONT / REAR)

1146 90MM AUdI A4/S4 A6/S6 A8/S8 R8

► The GEN 2 type ofwheel bearing ispredominantly fittedto models from Ford,Land Rover, Mazda, VWGroup and Volvo

► Includes a variety ofdifferent diameter toolkits covering a rangeof sizes to suit thedifferent GEN2bearings used byvehicle manufacturers

► Designed to distribute pressing force evenly through the outer bearing race and alsoallows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

WERKZEUG

R

(GERMAN fORQUALITY TOOLS!)

1018-1 GEARBOX OIL fILLER dEVICEWITH 8PC AdAPTOR SET

1129 UNIVERSAL ENGINE SUPPORT BEAM

included returnflow function

4104 57-PIECE SOCKET SET

4107 171-PIECE SOCKET SET1/4 + 3/8 + 1/2dR

► Warrior Hose speciallymanufactured for theindustrial and automotivesector offering excellentflexibility and kink resistance.

► The Warrior Hose is auniversal performerresistance to corrosions frommany chemicals, solvents,fuels, oils and greases.

► The Warrior Hose materialsoffer far greater resistance toage and abrasions wear farsuperior to standard rubberhose.

► Economically-friendly,super flexibility resulting intotal kink resistance hose.

► The high visibility stripe isalso greatly appreciated forsafety in the workplace.

TECHNICAL► Abrasion resistance► Highly flexible► Kink resistant► 20 Meters (Approx. 66-Ft)► 300 psi► 20 Bar► 3 / 8 / 10mm bore

Welzh Werkzeug l 1-6 The Green l Eastriggs l Scotland dG12 6NH(Tel) +44 (0)1461 700120 l (fax) +44 (0)1461 700181 l www.welzhwerkzeug.com l info@welzhwerkzeug.com

999 LEd INSPECTION LAMP

► 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14MM Deep Sockets:

► 4-5-5.5-6-7-8-9-10-11-12-13 MMShallow Sockets

► 1 x 72th Lever Type Quick ReleaseRatchet

► 1 x Universal Joint

► 1 x 150mm Double End SpinnerHandle

► 1 x 115mm Sliding T Bar

► 1 x 150mm Flexible Bit Extension Bar

► 2 x Extension Bars 50mm & 100mm

► 1 x Socket Adaptor

► 4 x Hex Key Wrenches:

► 1.27-1.5-2-2.5mm 21 x Bit Sockets:

► 3 - Slotted: 4-5.5-7mm

► 3 - Phillips: NO.1-2-3

► 3 - Pozidriv: NO.1-2-3 6 –

► Hex: 3-4-5-6-7-8mm 6 –

► Tx:T10-T-T15-T20-T25-T30-T40

► Built-in indicating light: red =charging, green =fully charged

► On/off button on handle

► Can be used for indoor and outdoor lighting, as an emergency light andinspection light for car etc.

The bottom can beswiveled, right orleft 90o each way

Torch function: 5LED on top can be

used as torch

Magnets onback and

bottom of light

Two flexiblehooks on back

VAG BEARING

fORd BEARING

GEN2 BEARING REMOVAL & INSTALLATION KITS► Suitable for the in situseparation of suspensioncomponents with minimummanual effort and maximumefficiency

► Fully adjustable hookposition allows for use in avariety of positions and catersfor left or right handed use

► New patented designallows for less force to beapplied and ensuringmaximum pressure

► For use with 1/4" inch die grinders, routers and drills to grind,polish, shape and burnish metal surfaces and also grind moststeel types and glass, plastics, marble or granite and variousother materials

► Each burr is double diamond cut with a 6mm shank andcarbide tipped

► The set contains:

► 280 nm hard hitting torque for the hard to reach places

► Power and speed of an impact and the reach of a ratchet

► Patented cooling / lubrication system to reduce excessive heatand increase life of the tool

► Reinforced aluminium alloy die cast head with steel retainingnut for durability

► Patented exhaust mechanism uses a built in twin chamber toreduce exhaust noise without losing power

► Head height less than 2”

► Middle handle exhaust with 360° adjustable deflector directsair away from the operator

► 2 positions in forward and a full 280 nm of nut wrenchingtorque in reverse

► Blows per minute 2,100

► Operates at 90 PSI only

► A true problem solver for the disassembly and re-assembly of theinternal rebound springs of shock absorbers in suspension struts

► Allows for the safe retaining of the piston rod in extended position

► Universal protective clamp holds piston rod in-situ

► Telescopic handle and bearing assembly allows for correct assembly ofnew piston

► Universal use for most vehicle’s : BMW, Fiat, Ford, Mercedes, Nissan,Peugeot, Toyota etc.

► Comprises a ten slot universal hub adaptor plate for simplefitment to any hub bolt layout;

► A powerful 12 tonne hydraulic ram to remove the hubassembly and a 2.8kg slide hammer for the removal ofstubborn hubs where controlled pressure is not required

► New spin-on oil filters can usually be screwedon by hand Removal of the "black cans" after along period of service is generally more difficultas unscrewing requires significantly greater force.

► The special wrenches are ideal tools for thispurpose

► Therefore this set offers a suitable tool forvirtually all branded spin-on oil filters in thepassenger and commercial vehicle segments

► Particularly in the restricted space of theengine compartment,

► Removal using the 1130 set is faster andsimpler than with standard tools

► For Use On: Audi, Volvo, Renault, Lexus,Peugeot, Ford, BMW, Volkswagen, Mercedes,Toyota, Nissan, Subaru, Mazda, Kia, Opel/Vauxhall,Mini etc,

4115 1/2" dRIVE ANGLEd IMPACT WRENCH- HEAVY dUTY

1130 19-PIECE GENERATION-2OIL fILTER KIT

► For use with 1/4" inch die grinders, routers and drills to grind,polish, shape and burnish metalsurfaces and also grind most steeltypes and glass, plastics, marble or granite and various other materials

► Each burr is double diamond cut with a 10mm shank and carbide tipped

► The set contains:

Flat Tipped Cylindrical Burr SmallFlat Tipped Cylindrical Burr LargeRounded Cylindrical BurrCylindrical Burr SmallCylindrical Burr MediumCylindrical Burr LargeCone Burr

78092 EXTRA LONG CARBIdE BURRS 7-PIECE

► Innovative shaped jaws

► Only universal springcompressor on the market forwishbone/multilink suspensionwith angled jaws

► Improves safety

► Provides a high degree offunctionality

► Functions as extension unit

► Makes it easier, safer and moreconvenient to position the tocorrectly inside the spring

► Prevents overload

► Improves safety

► Very compact design makes itpossible to use the tool for cars with asmall hole in the rear spring controlarm down to ø30mm.

► Usable on 98% of all cars with wishbone/multilinksuspension rear and front

1114 INTERNAL COIL SPRING COMPRESSOR fORWISHBONE / MULTILINK SUSPENSION

► A unique concept to aid the removal of seized suspension partsand ball joints, steering racks etc.

► The system allows for the controlled application of forceproviding 2100 equivalent hammer blows every 37 seconds via anspecially designed welzh air powered impact hammer allowingthe operator to control and gradually increase the force beingapplied, in order to loosen the sized components

► Whilst the air hammer has been designed for use on suspensionparts there are a number of additional applications where its usemay prove to be convenient e.g.

► Seized or rusted nuts / bolts on any part of the vehicle, thefrequency alleviate rusted conditions

► Seized injectors where there is no need to retain the injector forfuture use using it

► This vibration hammer will allow the user to control andgradually increase the force being applied, in order to loosen theseized component

► Complete with a specially engineered vibration Hammer Headsfor various applications

► Supplied In an heavy duty BMC

1070 VIBRATION HAMMER KIT

the standardfor Torque!

2114 TORQUE SETTER 1600NMIMPACT WRENCH

4103 STRUT CONTROLLER SET

TOOLS

1131 HYdRAULIC RAMANd SLIdEHAMMER HUBPULLER KIT

► Impact wrench with a smart design and ergonomically designed handle

► Single-switch can be changed for easy forward or reverse operation

► Easily adjustable torque regulator

► Can be configured for right and lefthanded use

► High Quality Composite Body

► Drive: 1/2"

► Max Torque (Reverse): 1600Nm or 1180.09 ft lbs

► Weight: 1.8 kg

SEIZED OR RUSTED BOLT / NUTS

SEIZED BALL JOINT

78091 CARBIdE BURRS 7-PIECE

Flat Tipped Cylindrical Burr SmallFlat Tipped Cylindrical Burr LargeRounded Cylindrical BurrCylindrical Burr Small

Cylindrical Burr MediumCylindrical Burr LargeCone Burr