Embed Size (px)
DESCRIPTION
Overview - Connex 3D Multi-Material PrintersThe Connex family consists of the first 3D printing systems that enable simultaneous jetting of multiple model materials. This unique ability to print parts and assemblies made of multiple materials in a single build and to create composite Digital Materials™ on the fly facilitates closer-than-ever simulation of a wide variety of end products.
Citation preview
Connex500
•PolyJet Matrix™– Technology that Jets two
model materials simultaneously
Introducing…
Pioneering…
Digital Material™
Objet’s Digital Materials are
composite materials fabricated by
PolyJet Matrix technology
PolyJet Matrix
• Printing:– Mixed Parts – parts or assemblies printed with multiple
model materials – Digital Materials – Digital Materials are composite
materials that are fabricated by the Connex500 – Mixed Tray – a tray of parts printed with different model
materials in a single build
Connex500
Connex500
A PolyJet MatrixTM
System
– Connex500 jets two different model materials simultaneously
Connex500
2 Model Materials
Support Material
4 x Jumbo 3.6kg cartridges for model and support
Connex500 Two Model Materials
• The Connex500 enables the use of two FullCure® model materials
TangoBlack
VeroWhite
Connex500
Connex500 - DM Printing Mode
• Provides the ability to print– Mixed Parts– Digital Materials– Mixed Tray
• Speed: 12 mm/hour/strip• Layer thickness: 30µ
Connex500 Flexibility
• 3 printing modes:– DM Printing mode:
• Speed: 12 mm/hour/strip• Layer thickness: 30µ
– HQ Printing mode: • Speed: 12 mm/hour/strip• Layer thickness: 16µ
– HS Printing mode: • Speed: 20 mm/hour/strip• Layer thickness: 30µ
Connex500 - Digital Materials
• 21 Preset Digital Material combinations • Assign a variety of materials to each
shell/assembly in the model• Print a complete product
Coating Parts
• Printing FullCure model material over other FullCure material– Printing Tango over Vero
• Allows for flexible moving parts • Coating level can be defined by
Objet Studio• Simulate the form/fit and feel of
real partsCoating of TangoBlack Over VeroWhite with
different coating levels
Connex500 - Over Molded Parts
• Reduces cost of error in preparing complex moulds by creating a real part early in the process
• Saves printing and post
process time• Improves communication
among product development
groups
Connex500 - Digital Materials SHORE Options
• Create a variety of flexible materials with different SHORE values
• Matches the printed model to the real part
Connex500 - SHORE Options
TangoBlack SHORE 61
All in one print
DM_9130 SHORE 95
DM_9110 SHORE 80
Connex500 - Grayscales and Tones
• Highlight areas of interest• Set marks and signs on the model for
assembly • Creates captions on the models
Connex500 - Medical Applications
• Enables marking of internal organs when of interest
• Pre procedure visualization and communication
Human body based on CT information
Nerves
Connex 500
Connex500 - Technical Data
• New printing block and software • Tray size
– 500x400x200mm
(19.7x15.7x7.9 inch)
• Resolution– X Axis: 600DPI– Y Axis: 600DPI
• Machine dimension– 1430x1130x1120mm
(55.9x44.1x44.5 inch)
Connex 500
DM_8120
DM_9130
VeroWhite coated with TangoBlack
DM_8130
DM_9120
Connex 500
Thank you
