MV Catalogue Cable Systems_33kV,_1250A_50...MV-ConnEX Multi-Contact Elbow Bushing up to 52 kV MV-ConnEX Surge Arrester up to 52 kV MV-ConnEX Busbar Connectors up to 42 kV Voltage detecting

Edition 2011

Cable fittings for medium voltage networksCABLE SYStEMS

michael ryan

MR STAMP 2

Cable Fittings for Medium Voltage networks.Our range of cable accessories offers solutions for virtually all applications in the area of medium voltage engineering. All accessories use silicone rubber as insulating medium because of its outstanding properties. We offer components and complete systems.

CONNEX meets all your requirements to an universal system of separable connectors: fully insulated with metal housing and providing touch-proof properties. It is maintenance-free, suitable for outdoor use and waterproof. This means MV-CONNEX can be used even in the most extreme conditions.

MV-CONNEX for medium voltage systems comes in a wide range of variations. It includes traditional plug

and socket combinations, multiple sockets, bus-bar connectors, surge arresters and voltage detecting systems.

MV-CONNEX components are factory tested and are surprisingly simple to install. Complex oil and gas work during installation and commissioning of transformers is finally a thing of the past.

MV-ConnEX. A dry, Separable Connector System for Medium Voltage networks.

Silicone – a Key Material in Medium Voltage Engineering.

With the increasing use of enclosed switchgear, voltage testing systems, that indicate the presence of voltage without directly contacting live parts, are becoming increasingly important. The principle of the DSA continuous voltage indicator that was deve-

loped by us has become a standard. In line with the trend towards integrated systems we have incorpo-rated these plug-in display devices in the compact DSA-i3 system.

Continuous voltage indicator for enclosed equipment.

Water, dirt, grease and oil-resistant, completely maintenance-free, shock-resistant and unbreakable: silicone rubber is the perfect material for cable termi-nations and far superior to traditional materials such as porcelain. When used as a stress-relief device in sealed applications, silicone evens out tempera-ture variations and unevenness in the cable surface

much better than harder materials such as EPDM do. Dangerous partial discharges caused by air gaps are safely avoided. PFISTERER makes silicone pro-ducts primarily using advanced LSR (Liquid Silicone Rubber) designs; special variations are designed using RTV (Room-Temperature Vulcanizing Silico-ne).

� www.pfisterer.com

Contents

�www.pfisterer.com

Contents

Voltage detecting Systems Page | 66 – 76

MV-ConnEX Pluggable Connection System Page | 8 – 65

ii

i

� www.pfisterer.com

Contents

MV-ConnEX Pluggable Connection System

Voltage detecting Systems

�www.pfisterer.com

Contents

MV-CONNEXSeparable Connectors

Page 10 – 1�

i

MV-CONNEXTransformer Bushings

Page 29 – �3

MV-CONNEXConnecting and

Branching SystemPage �3 – ��

Page | 8 – 65

iiPage | 66 – 76

MV-CONNEXSurge ArresterPage �0 – �1

AccessoriesPage 18 – 28

MV-CONNEXBushings

Page �� – �0

Bus-Bar Couple SystemPage �1 – �2

MV-CONNEX Earthing and Short-Circuit Devices

Page �8 – �9

MV-CONNEXCMA- and CMS-System

Page �2 – ��

IndicatorsSeite �� – �8

Interfaces and Connecting Leads

Seite 69

In-service Test for Phase Comparators EPV

Seite 73

TestersSeite 70 – 72

8 www.pfisterer.com


i

MV-

Co

nn

EX P

lugg

able

Con

nect

ion

Syst

em

The MV-CONNEX range is ideal for use in ring main units, circuit-breaker switch-gear, high-voltage motors, transformers, capacitors, transducers and sealing boxes. The connectors on the equipment-side are designed to meet EN �0180, �0181, and DIN ��3�. The plug is suitable for all kinds of insulated plastic cables. As well as a wide range of standard types there are also customer-specific versions for every cable type. The MV-CONNEX system features numerous variations: in addition to the standard plug and socket combination, there are many other versions for testing pur-poses and special applications.

Advantagesn no liquid insulating mediumn no need to open the cable termination at the installation siten deckwater-proofn suitable for outdoor usen thorough transformer and GIS testing by manufacturer possible

n metal enclosedn fully insulatedn touch proofn free from arcingn high short-circuit protectionn maintenance freen soil- and offshore-proof (optional)

MV-ConnEX up to 52 kV

A Contact system1 contact ring2 tension cone3 thrust piece B insulating and field-control part

C Housing 4 bell flange 5 pressure sleeve 6 pressure spring 7 heat-shrink8 test lead (depends on design)9 cable screen

d Bushing10 female contact part 11 insulating bushing 12 housing

10 11 12 1 2 3 6 5 4 7 9

8A B CD

9www.pfisterer.com


i

MV-

Co

nn

EX P

lugg

able

Con

nect

ion

Syst

emMulti-contact elbow bushings are used instead of DIN-standard porcelain versions on the medium-voltage side of power trans-formers. They distribute the current over two or four cables, thus accommodating higher power loads using more manageable cable cross sections.

CONNEX surge arresters are used to protect metal-enclosed switchgear fitted with cable terminations in accordance with EN �0180/EN �0181. The surge arresters are connected to the switch-gear transformer and prevent the entry of excessively high surges. The surge arresters are particularly effective in limiting surges caused by reflected travelling waves and switching overvoltages.

Busbar connectors facilitate the modular construction and on-site expansion of SF� insulated switchgear, because the gas compartment does not have to be opened during installation. The range includes 2� kV to �2 kV versions.

The integrated capacitive potential point makes it easy to check the connection for the absence of voltage. The PFISTERER range includes mobile and stationary continuous voltage indicators, as well as phase comparators and performance testing equipment.

MV-ConnEX Multi-Contact Elbow Bushing up to 52 kV

MV-ConnEX Surge Arrester up to 52 kV

MV-ConnEX Busbar Connectors up to 42 kV


CMA-MV-ConnEX Motor Connector up to 13,8 kV

The CMA-MV-CONNEX motor connector allows the quick and easy connection of high-voltage motors, with the connection area being fully metal-enclosed and intrinsically safe. The system is easily installed in place of the motor connection box.

10 www.pfisterer.com

MV-ConnEX Separable Connectors, Size 0 - 3-Stechnical data and Size Classification List■ type tested in accordance to IEC �0 �02-�:200� / DIN VDE 02�8-�29-1:200�

*) Packing Unit = 3 pieces

**) Cross section is for information only.Actual value is limited by min. / max. diameter over conductor and min. / max. diameter over insulation.

Size / Voltage tap 0without voltage tap

1with voltage tap

1without voltage tap

2with voltage tap

2withoutvoltagetap

3with voltage tap

3without voltage tap

3-Swith voltage tap

3-Swithout voltage tap

max. operating voltage Um (kV) 2� 3� 3� �2 �2 �2 �2 �2 �2

nominal current in (A) 2�0 �30 �30 800 800 12�0 12�0 12�0 12�0

Cross section range **) (mm2) 2� - �0 2� - 2�0 2� - 2�0 2� - 32� 2� - 32� �0 - �30 �0 - �30 �0 - �30 �0 - �30

Min. conductor diameter Ø (mm) �.� �.9 �.9 �.9 �.9 �.2 �.2 �.2 �.2

Max. conductor diameter Ø (mm) 12.� 20.1 20.1 2�.1 2�.1 3�.� 3�.� 3�.� 3�.�

Min. diameter over insulation

Ø (mm) 12.� 13.� 13.� 13.� 13.� 1�.� 1�.� 1�.� ��.0

Max. diameter over insulation

Ø (mm) 23.� 31.� 3�.0 3�.0 �0.0 ��.0 �0.0 ��.0 �0.0

Gross weight per packing unit *)

(kg) 2.� �.0 �.0 �.3 �.3 9.9 9.9 9.� 9.9

Rated power frequency withstand voltage

1 min (kV) �0 �0 �0 9� 9� 9� 9� 11� 11�

Partial discharge at 2x U0 (pC) ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10

Rated lightning impulse withstand voltage (BiL)

(kV) 12� 1�0 1�0 200 200 200 200 2�0 2�0

dC voltage test 15 min 6 x U0 (kV) �2 108 108 12� 12� 12� 12� 1�� 1��

Rated short-time withstand current

0,5 s (kA) - �0 �0 �0 �0 �3 �3 �3 �3


1 s (kA) 1� 31.� 31.� �0 �0 �0 �0 �0 �0

Rated impulse current (kA) �0 12� 12� 12� 12� 1�0 1�0 1�0 1�0

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors


11www.pfisterer.com

Company: name:

telephone: date:

E-mail: Signature:

Cable manufacturer: Cable type:

Size of bushing: Size 0 Size 1 Size 2 Size 3 Size 3-S

Votage tap: yes no

Application: Outdoor Outdoor installation vertical from above Indoor

Offshore (saltwater-proof/soil-resistant) Offshore vertical from above

Voltages: UO (phase/earth) kV UN (phase/phase) kV UM (Max. operating voltage 2 x UO) kV

Cable design: single core cable three core cable four core cable


i

MV-

Co

nn

EX S

epar

able

Con

nect

ors

Cu-wire

Cu-tape

Al-wire

Al-tape

Steel wire

Steel tape

Lead sheath

Cu-corr. sheath

Al-corr.sheath

Inner sheath

Filling compound

Cu-foil

Al-foil

Fibre optic cable

Cu-wire

Cu-tape

Al-wire

Al-tape

Lead sheath

Cu-corr. sheath

Al-corr.sheath

Fibre optic cable

stranded circular RM

stranded sector SM

solid circular RE

solid sector SE

superflexible stranded RF

XLPE

EPR

PVC

fully bonded

easy strip

graphite

without semi-conducting layer

Diameter (mm)

Cross Section (mm2)

Thickness (mm)

Remark:

PE

PVC

Cu-wire

Cu-tape

Al-wire

Al-tape

Steel wire

Steel tape

Lead sheath

Cu-corr. sheath

Al-corr.sheath

Inner sheath

Filling compound

Cu-foil

Al-foil

Form to determine MV-ConnEX Cable Connectors

(Separable connectors)


MV-ConnEX Separable Connectors, Size 0,Um = 24 kV, in = 250 AStandard article no.■ for DIN VDE cables■ for RM-conductor (stranded circular) of aluminium or copper■ for single core cable with copper wire screen without armouring■ with sealing system (bell flange seal and shrink tubing)■ for indoor and outdoor applications■ not soil-resistant and not offshore-proof■ Packaging unit: set with three cable connectors■ offshore version on request■ 3-core version on request

no. Max. operating voltage

For cable cross-section

For diameter over conductor

insulation thickness (no-minal value)

For diameter over XLPE insulation

without voltage tap

Um (kV) (mm2) Ø (mm) (mm) Ø (mm)

870 010 025 12 2� �.� - �.� 3.� 12.� - 1�.3

870 010 035 12 3� �.� - �.� 3.� 12.� - 1�.3

870 010 050 12 �0 �.� - 8.� 3.� 1�.0 - 19.2

870 010 070 12 �0 9.3 - 10.2 3.� 1�.0 - 19.2

870 020 025 2� 2� �.� - �.� �.� 1�.0 - 19.2

870 020 035 2� 3� �.� - �.� �.� 18.0 - 21.�

870 020 050 2� �0 �.� - 8.� �.� 20.0 - 23.�

870 020 070 2� �0 9.3 - 10.2 �.� 20.0 - 23.�

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors


13www.pfisterer.com


The picture shows an MV-CONNEX cable connector without voltage tap

no. no. Max. operating voltage

For cable cross-section

For diameter over conductor

insulation thickness (nominal value)


with voltage tap

without voltage tap

Um (kV) (mm2) Ø (mm) (mm) Ø (mm)

850 110 035 870 110 035 12 3� �.0 - �.3 3.� 1�.� - 1�.�

850 110 050 870 110 050 12 �0 �.� - 8.8 3.� 1�.0 - 19.�

850 110 070 870 110 070 12 �0 9.3 - 10.� 3.� 18.0 - 21.�

850 110 095 870 110 095 12 9� 10.8 - 12.1 3.� 18.0 - 21.�

850 110 120 870 110 120 12 120 12.3 - 13.� 3.� 20.0 - 23.�

850 110 150 870 110 150 12 1�0 13.8 - 1�.1 3.� 22.0 - 2�.�

850 110 185 870 110 185 12 18� 1�.3 - 1�.� 3.� 23.� - 2�.0

850 110 240 870 110 240 12 2�0 1�.8 - 19.1 3.� 2�.0 - 28.�

850 120 035 870 120 035 2� 3� �.0 - �.3 �.� 18.0 - 21.�

850 120 050 870 120 050 2� �0 �.� - 8.8 �.� 18.0 - 21.�

850 120 070 870 120 070 2� �0 9.3 - 10.� �.� 22.0 - 2�.�

850 120 095 870 120 095 2� 9� 10.8 - 12.1 �.� 23.� - 2�.0

850 120 120 870 120 120 2� 120 12.3 - 13.� �.� 23.� - 2�.0

850 120 150 870 120 150 2� 1�0 13.8 - 1�.1 �.� 2�.0 - 28.�

850 120 185 870 120 185 2� 18� 1�.3 - 1�.� �.� 2�.� - 30.0

850 120 240 870 120 240 2� 2�0 1�.8 - 19.1 �.� 28.0 - 31.�

850 130 050 870 130 050 3� �0 �.� - 8.8 8.0 23.� - 2�.0

850 130 070 870 130 070 3� �0 9.3 - 10.� 8.0 2�.0 - 28.�

850 130 095 870 130 095 3� 9� 10.8 - 12.1 8.0 2�.� - 30.0

850 130 120 870 130 120 3� 120 12.3 - 13.� 8.0 28.0 - 31.�

- 870 130 150 3� 1�0 13.8 - 1�.1 8.0 30.0 - 33.0

- 870 130 185 3� 18� 1�.3 - 1�.� 8.0 31.0 - 3�.0

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors


1� www.pfisterer.com


The picture shows an MV-CONNEX cable connector with voltage tap.


for cable cross-sec-tion

for diameter over conductor



with voltage tap

without voltage tap

Um (kV) (mm2) (mm) (mm) Ø (mm)

850 210 050 870 210 050 12 �0 �.� - 8.8 3.� 13.� - 1�.�

850 210 070 870 210 070 12 �0 9.3 - 10.� 3.� 1�.0 - 19.�

850 210 095 870 210 095 12 9� 10.8 - 12.1 3.� 18.0 - 21.�

850 210 120 870 210 120 12 120 12.3 - 13.� 3.� 20.0 - 23.�

850 210 150 870 210 150 12 1�0 13.8 - 1�.1 3.� 20.0 - 23.�

850 210 185 870 210 185 12 18� 1�.3 - 1�.� 3.� 22.0 - 2�.�

850 210 240 870 210 240 12 2�0 1�.8 - 19.1 3.� 2�.0 - 28.�

850 210 300 870 210 300 12 300 19.2 - 20.9 3.� 28.0 - 31.�

850 220 050 870 220 050 2� �0 �.� - 8.8 �.� 20.0 - 23.�

850 220 070 870 220 070 2� �0 9.3 - 10.� �.� 20.0 - 23.�

850 220 095 870 220 095 2� 9� 10.8 - 12.1 �.� 22.0 - 2�.�

850 220 120 870 220 120 2� 120 12.3 - 13.� �.� 23.� - 2�.0

850 220 150 870 220 150 2� 1�0 13.8 - 1�.1 �.� 2�.0 - 28.�

850 220 185 870 220 185 2� 18� 1�.3 - 1�.� �.� 2�.� - 30.0

850 220 240 870 220 240 2� 2�0 1�.8 - 19.1 �.� 29.� - 33.0

850 220 300 870 220 300 2� 300 19.2 - 20.9 �.� 31.0 - 3�.�

850 230 035 870 230 035 3� 3� �.0 - �.3 8.0 1�.0 - 19.�

850 230 050 870 230 050 3� �0 �.� - 8.8 8.0 23.� - 2�.0

850 230 070 870 230 070 3� �0 9.3 - 10.� 8.0 2�.0 - 28.�

850 230 095 870 230 095 3� 9� 10.8 - 12.1 8.0 2�.� - 30.0

850 230 120 870 230 120 3� 120 12.3 - 13.� 8.0 28.0 - 31.�

850 230 150 870 230 150 3� 1�0 13.8 - 1�.1 8.0 29.� - 33.0

850 230 185 870 230 185 3� 18� 1�.3 - 1�.� 8.0 31.0 - 3�.�

850 230 240 870 230 240 3� 2�0 1�.8 - 19.1 8.0 32.� - 3�.0

- 870 230 300 3� 300 19.2 - 20.9 8.0 3�.0 - 38.0

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors


1�www.pfisterer.com

MV-ConnEX Separable Connectors, Size 3,Um = 42 kV, in = 1250 AStandard article no.■ for DIN VDE cables■ for RM-conductor (stranded circular) of aluminium or copper■ for single core cable with copper wire screen without armouring■ with sealing system (bell flange seal and shrink tubing)■ for indoor and outdoor applications■ not soil-resistant and not offshore-proof■ Packaging unit: set with three cable connectors■ rotatable flange■ offshore version on request■ 3-core version on request

The picture shows an MV-CONNEX cable connector without voltage tap


for cable cross-sec-tion



for diameter over XLPE insulation

with voltage tap

without voltage tap

Um (kV) (mm2) (mm) (mm) Ø (mm)

850 310 120 870 310 120 12 120 12.� - 1�.� 3.� 19.0 - 23.0

850 310 150 870 310 150 12 1�0 13.� - 1�.� 3.� 19.0 - 23.0

850 310 185 870 310 185 12 18� 1�.0 - 1�.2 3.� 22.� - 2�.�

850 310 240 870 310 240 12 2�0 1�.� - 19.� 3.� 2�.� - 28.�

850 310 300 870 310 300 12 300 19.� - 21.� 3.� 2�.0 - 30.0

850 310 400 870 310 400 12 �00 22.� - 2�.8 3.� 30.0 - 3�.0

850 310 500 870 310 500 12 �00 2�.� - 2�.� 3.� 32.0 - 3�.0

850 310 630 870 310 630 12 �30 28.9 - 31.1 3.� 3�.0 - 39.�

850 320 050 870 320 050 2� �0 �.2 - 9.� �.� 19.0 - 23.0

850 320 070 870 320 070 2� �0 9.0 - 11.2 �.� 19.0 - 23.0

850 320 095 870 320 095 2� 9� 10.� - 12.� �.� 22.� - 2�.�

850 320 120 870 320 120 2� 120 12.� - 1�.� �.� 22.� - 2�.�

850 320 150 870 320 150 2� 1�0 13.� - 1�.� �.� 2�.� - 28.�

850 320 185 870 320 185 2� 18� 1�.0 - 1�.2 �.� 2�.0 - 30.0

850 320 240 870 320 240 2� 2�0 1�.� - 19.� �.� 28.0 - 32.0

850 320 300 870 320 300 2� 300 19.� - 21.� �.� 30.0 - 3�.0

850 320 400 870 320 400 2� �00 22.� - 2�.8 �.� 3�.0 - 38.0

850 320 500 870 320 500 2� �00 2�.� - 2�.� �.� 3�.0 - 39.�

850 320 630 870 320 630 2� �30 28.9 - 31.1 �.� �0.0 - �3.0

850 330 050 870 330 050 3� �0 �.2 - 9.� 8.0 22.� - 2�.�

850 330 070 870 330 070 3� �0 9.0 - 11.2 8.0 2�.� - 28.�

850 330 095 870 330 095 3� 9� 10.� - 12.� 8.0 2�.0 - 30.0

850 330 120 870 330 120 3� 120 11.� - 13.� 8.0 28.0 - 32.0

850 330 150 870 330 150 3� 1�0 13.� - 1�.� 8.0 30.0 - 3�.0

850 330 185 870 330 185 3� 18� 1�.0 - 1�.2 8.0 32.0 - 3�.0

850 330 240 870 330 240 3� 2�0 1�.� - 19.� 8.0 3�.0 - 38.0

850 330 300 870 330 300 3� 300 19.� - 21.� 8.0 3�.0 - 39.�

850 330 400 870 330 400 3� �00 22.� - 2�.8 8.0 38.0 - �1.0

850 330 500 870 330 500 3� �00 2�.� - 2�.� 8.0 �2.0 - ��.�

- 870 330 630 3� �30 28.9 - 31.1 8.0 ��.� - �8.0

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors



MV-ConnEX Separable Connectors, Size 3-S, Um = 52 kV, in = 1250 AStandard article no.■ for RM-conductor (stranded circular) of aluminium or copper■ for single core cable with copper wire screen without armouring■ with sealing system (bell flange seal and shrink tubing)■ for indoor and outdoor applications■ not soil-resistant and not offshore-proof■ Packaging unit: set with three cable connectors■ Voltage taps that are not connected to a voltage display system, must be earthed for size 3-S.■ rotatable flange■ offshore version on request■ 3-core version on request


for cable cross-section


for diameter over XLPEinsulation

with voltage tap

without voltage tap

Um (kV) (mm2) (mm) Ø (mm)

850 350 120 - �2 120 11.� - 13.� 32.0 - 3�.0

850 350 150 - �2 1�0 13.� - 1�.� 3�.0 - 39.�

850 350 185 - �2 18� 1�.0 - 1�.2 3�.0 - 39.�

850 350 240 - �2 2�0 1�.� - 19.� 38.0 - �1.0

850 350 300 - �2 300 19.� - 21.� 38.0 - �1.0

850 350 400 - �2 �00 22.� - 2�.8 �0.0 - �3.0

850 350 500 - �2 �00 2�.� - 2�.� �3.� - ��.0

- 870 350 630 �2 �30 28.9 - 31.1 ��.� - �0.0

order informationCaution! important information.

The bell flange is available in bronze for underground and offshore use. These CONNEX cable connectors are available in sizes 1, 2, 3 and 3-S.

The cable insulation must correspond to the rated voltage of the CONNEX cable con-nector. Example: for a 20 kV insulated cable, even if the cable is powered with 10 kV rated voltage the CONNEX cable connector for 2� kV max. operating voltage must be selected, as the standard thickness of insulation for DIN VDE cables is linked to the max. operating voltage and the appropriate insulator was assigned based on this.

Special tools are required to assemble the contact system of the CONNEX connectors.Only qualified personnel who have been authorised and trained by the manufacturer should work on and with the product. The personnel receive a certificate for the training from the manufacturer with a validity of � years.

Note the special assembly for CONNEX cable connectors sizes 1, 2, 3 and 3-S for cable bundle: An additional special tool is required to press the aluminium sleeve onto the superflexible stranded conductor.

CONNEX cable connectors size 1 or 2 with rotatable flange available on request, size 3 or 3-S as a standard.

For vertical outdoor assembly from above is an additional sealing set required:This is available with article no. ��9 218 001 for one set of size 3 and no. ��9 218 002 for one set of size 2.

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors



Product ConfiguratorFor cables that have not been produced to comply with DIN VDE, a product configurator is used to determine an individual article number for the required MV-CONNEX cable connectors size 0 - 3-S. To do this the Form for determine MV-CONNEX Separable Connectors, found in the introductory section of the catalogue, must be fully completed.The individual article number consists of a base number and a variant number and con-tains all parts for connecting and earthing the individual cable.

809 999 999 variant XXXX (contains 3 cable connectors)801 999 999 variant XXXX (contains 1 cable connector)MV-CONNEX cable connector, size 0IN = 2�0 A, Umax = 2� kVwithout voltage tapwith sealing system (seal and shrink tubing)

819 999 999 variant XXXX (contains 3 cable connectors)811 999 999 variant XXXX (contains 1 cable connector)MV-CONNEX cable connector, size 1IN = �30 A, Umax = 3� kVwith or without voltage tapwith sealing system (seal and shrink tubing)

829 999 999 variant XXXX (contains 3 cable connectors)821 999 999 variant XXXX (contains 1 cable connector)MV-CONNEX cable connector, size 2IN = 800 A, Umax = �2 kVwith or without voltage tapwith sealing system (seal and shrink tubing)

839 999 999 variant XXXX (contain 3 cable connectors)831 999 999 variant XXXX (contain 1 cable connector)MV-CONNEX cable connector, size 3 / 3-SIN = 12�0 A, Umax = �2 / �2 kVwith or without voltage tapwith sealing system (seal and shrink tubing)

i

MV-

Co

nn

EX S

epar

able

Con

nect

ors



tools for Round-Pressing Aluminium Sleeves

Aluminium Carrying Case - Emptyfor tools for round-pressing aluminium sleeves.

no.

305 767 001

Hydraulic tool heads 850 barHydraulic tool heads 8�0 bar with oil-tight coupling plug for two-stage high-pressure pumps and electro-hydraulic high-pressure pumps EHP with hose coupling (coupling socket).

no. type Power stroke nominal com-pression force

Weight

(mm) (kn) (kg)

305 818 001 BIII 30 2�0 �.�

i

Acc

esso

ries


19www.pfisterer.com

Round Compression diesFor round-pressing aluminium sleeves on fine-wire conductors of a flexible cable, the following high-pressure rounding tools are required:

no. Compression die code no.

External diameter of the aluminium crim-ping sleeve

for aluminium crimping sleeve

Ø (mm)

300 632 632 HR 11 13.0 ��8 003 001��8 003 00��8 003 01��8 003 023

300 632 635 HR 1� 18.� ��8 003 00��8 003 00��8 003 008��8 003 010��8 003 013��8 003 01�

300 632 637 HR 20 22.� ��8 003 018��8 003 012��8 003 020��8 003 009

300 632 639 HR 22 2�.0 ��8 003 021��8 003 022

300 632 640 HR 2� 28.� ��8 003 01��8 003 01�

300 642 001 HR 28 32.0 ��8 003 011��8 003 019

300 641 001 HR 32 3�.� ��8 003 02��8 003 02��8 003 02�

two stage high pressure pumpThe high-pressure unit is mounted horizontally on a galvanised U-frame. The valve body is made of aluminium alloy. Therefore the pump is very light.The high-pressure hose is fitted with an oil-tight coupling socket for connecting the compression head. The pump operates with rapid thrust until the compression starts, thus requiring fewer power stro-kes. An excess pressure valve protects the compression tool against overload.

no. Hose length operating pressure Hydraulic oil volume

(mm) (bar) (cm3)

305 799 002 3000 8�0 �00

i

Acc

esso

ries



Assembly Accessories

Carrying Case - empty -To accommodate tools for the assembly of CONNEX separable connectors.

no.

305 768 001

Assembly toolsfor CONNEX cable connectors size 3 / 3-S, in carrying case, complete

no. Consisting of

305 768 003 30� ��8 00182� 01� 00230� �� 003��9 21� 003��9 223 002�� 00� 00982� 1�� 00182� 1�� 00182� 1�� 00130� 0�1 0�130� 0�3 0�3

Hydraulic Hand-operated Compression toolBasic Tool for sizes 1, 2 and 3 without compression head.

no.

827 017 002

Compression Headincluding pull-off die for hand-operated compression tool.

no. Size

305 675 001 1

305 675 002 2

305 675 003 3

impact devicemade of plastic. For the pre-assembly of the connector contact.

no. Size

559 214 001 1

559 214 002 2

559 214 003 3

i

Acc

esso

ries


21www.pfisterer.com

Measuring templatefor an economical cut-back of the cable sheath during connector assembly.

no. Size

559 224 001 0

559 215 001 1, 2

559 223 002 3

Hexagon Wrench SW 6for tightening the screws of separable connectors sizes 0 - 3.

no.

546 004 009

Chainfor suspending the assembly lever and hole bar (only for Size 3).

no.

827 165 001

Assembly Leverfor pressing and releasing the bell flange of the CONNEX separable connector size 3.

no.

827 167 001

Unplug Rod for Assembly Leverfor MV-CONNEX cable connectors size 1, 2, 3

no.

827 229 001

Hole Barfor suspending the assembly lever (only for Size 3).

no.

827 166 001

i

Acc

esso

ries



Assembly ClampAssembly clamp for holding the cable during heat-shrinking and for releasing the CON-NEX separable connector.

no.

827 153 001

Cable Stripperfor PE/XLPE insulation. Longitudinal and radial cutting with adjustable depth stop.

no.

305 051 051

Spare Blade for Cable Stripper

no.

305 063 063

Hexagonal compression diesfor threaded pin and Cu strand for CONNEX transformer and appliance elbow connecting parts

no. Code number Width

(mm)

300 438 441 8 32

300 438 443 10 32

300 438 445 12 32

300 438 447 1� 32

300 438 448 1� 32

300 438 449 18 32

300 438 451 20 32

300 438 452 22 32

300 438 453 2� 32

i

Acc

esso

ries


open hand-operated compression toolGripper for CONNEX cable connecting part size 0

Hexagon pressing tool for hand-held jointing clamp PRIMAT O6 T, classification number 18 Al for Al and Cu conductors 2� - �0 mm2

no. 300 455 458

important!The crimp sleeve for the CONNEX cable connecting part size 0 should generally be pressed for Al and Cu cables of 2� - �0 mm2 using the pressing tool KZ 18 Al.

no. Weight

(kg)

303 871 002 3.2

23www.pfisterer.com

MV cable peeling tools for cable preparation - incl. carrying caseFor removal of the outer sheath (diameter range: 1� - �� mm), stripping of the semi-con-ductive layer (diameter range: 1� - �9 mm) and chamfering of the conductor insulation.

■ 82� 9�1 00�: outer jacket cutter for diameter over insulation 1� - �9 mm■ 82� 9�1 00�: peeling tool for fully bonded semi-conducting layer, diameter 1� - �� mm■ 82� 9�1 002: spare blade for outer jacket cutter 82� 9�1 00�■ 82� 9�1 003: spare blade for peeling tool 82� 9�1 00�

no.

827 951 001

Plug-in type Assembly Bushingsfor the pre-assembly of CONNEX separable connectors (e.g. in the workshop).

no. Size

827 174 003 0

827 174 001 1

827 174 002 2

827 174 004 3

Blind Capprotection against electric-shock hazard for live CONNEX separable connector.

no. Size Rated power frequencywithstandvoltage

Rated power frequencywithstandvoltage

Rated lightning impulse with-stand voltage (BiL)

1min (kV) 1h (kV) (kV)

827 130 001 0 �� 30 12�

827 131 001 1 81 �� 1�0

827 132 001 2 81 �2 1�0

827 133 001 3 9� �� 200

dummy Cable Connector■ for sealing and voltage-proof closing of CONNEX bushings.■ suitable for outdoor use or offshore-/soil-proof

no. Size Max. operating voltage

Use 1 Weight

Um (kV) (kg)

827 150 005 0 2� aboveground 0.�

827 150 002 1 3� aboveground 0.�

827 150 003 2 �2 aboveground 0.�

827 150 004 3 �2 aboveground 1.0

827 150 203 2 �2 offshore- and soil-proof

1.0

827 150 304 3 �2 offshore- and soil-proof

1.1

i

Acc

esso

ries



Protecting Cap■ not voltage proof

For protecting withdrawn CONNEX separable connectors against damage and dirt.

no. Size Material

546 133 001 0, 1 Plastic

827 134 004 0 Metal

827 134 001 1 Metal

827 134 002 2 Metal

827 134 003 3 Metal

Roll SpringsEarthing accessories for cables with metallic band shield and / or armour. These are assigned using the cable data from the product configurator.

no. diameter roll springs Width

Ø (mm) (mm)

546 078 009 1� - 22 1�

546 078 002 2� - �0 13

546 078 003 30 - 39 2�

546 078 004 �0 - �0 2�

546 078 007 �0 - �� 30

546 078 010 �� - 100 30

Clamping Collar acc. din 3017, Material V2AEarthing accessories for cables with metallic band shield and / or armour. These are assigned using the cable data from the product configurator.

no. Clamping Range Width

(mm) (mm)

620 866 001 20 - 32 10

617 825 007 32 - �0 10

617 825 001 �0 - �0 10

617 825 002 �0 - �0 10

617 825 003 �0 - 80 10

617 825 005 80 - 100 10

617 825 006 100 - 120 10

617 825 008 120 - 1�0 10

617 825 009 1�0 - 1�0 10

MV-ConnEX Silicone GreaseIs included for use when first fitting the cable connecting part. If the cable connecting part needs to be re-fitted, the MV-CONNEX special grease must be ordered separately.

no. type Weight

(g)

558 228 008 Bag 10

558 228 007 Can �00

i

Acc

esso

ries



Heat-Shrink tubingIncluded in delivery for cable connecting parts with a sealing system.

no. Heat shrink area Length Size

Ø (mm) (mm)

619 528 528 �8 / 22 12� 0

619 528 003 8� / 2� 1�0 1, 2

619 528 001 130 / 3� 22� 3

Sealing tapeIncluded in delivery for cable connecting parts with a sealing system.

no. Width thickness Length

(mm) d (mm) (mm)

545 036 002 2�.� 1.� 300

Copper Mesh HoseMaterial sold by the metre.Is classified as cables with tape shielding by the product configurator; used for metallic combining of the insulator and the field control part.

no. Width

(mm)

001 743 007 100

Cotton-insulating tapefor bundling energy cables.

no.

001 743 016

dry graphite (5ml)for adding an additional conductive layer, e.g. for removable or thin conductive layers.

no.

003 010 011

Cable Breakoutis classified under three-core cables by the product configurator.

no. Heat shrink area Heat shrink area Length

d (mm) d (mm) (mm)

020 839 025 31 / 1� 80 / 3� 19�

020 839 026 �1 / 20 110 / �8 230

020 839 027 �3 / 2� 1�0 / �2 230

020 839 023 �0 / 30 1�0 / �0 230

i

Acc

esso

ries



Heat Shrink tubingis classified under three-core cables by the product configurator.

*) Length �000 mm for 3 cores

no. Heat shrink area Length

Ø (mm) (mm)

023 998 010 �1 / 1� �000 *)

023 998 011 �8 / 22 �000 *)

Copper BraidingIn the product configurator is classified as three-core cables with common shielding, used for metallic shielding on the single cores.

no. Width Length

(mm) (mm)

001 743 005 �� 10000

Conductive Crepe Paperis classified by the product configurator as a buffer between the extruded cable shielding and the copper weave if common shielding.

no. Length Width

(mm) (mm)

002 756 011 1�000 �0

Copper Mesh tapeis classified by the product configurator using the cable data if cables with tape shield and / or band armour.

no. Width thickness Length Cross section

(mm) d (mm) (mm) (mm2)

001 743 009 22 2.� 1000 2�

001 743 008 30 2.� 1000 3�

i

Acc

esso

ries



ConnEX test and Adapter ConnectorsTo fulfill multiple usage requirements, the component is designed with 45° angle.They are used as transitional connecting parts when transformers that are equipped with CONNEX appliance connecting parts are connected to blank (overhead) lines. They are used as CONNEX test connecting parts for electrical testing of equipment that is equipped with CONNEX appliance connecting parts.

no. Size thread Max. opera-ting voltage

nominal current


Rated lightning impulse withstand voltage (BiL)

G Um (kV) in (A) 1min (kV) (kV)

827 186 210 0 M12 2� 2�0 �� 12�

827 186 211 1 M12 3� �30 81 1�0

827 186 212 2 M12 �2 800 9� 200

827 186 213 3 M12 �2 800 9� 200

Current-testing ConnectorsThis connector permits to carry out current tests on switchgear, transformers, transdu-cers etc. fitted with CONNEX bushings.

For the electrical and mechanical connection, the connector is inserted into a CONNEX bushing of equal size and bolted. The test lead is connected to the terminal stud with a screw.

no. Size nominal current

test cur-rent



Max. testing voltage

a b c d

in (A) max. 4min./A

1 s (kA) 3 s (kA) Um (kV) (mm) (mm) (mm) (mm)

827 181 010 0 2�0 ��0 1� - 2 88 30 122 18�

827 181 011 1 �30 2000 31.� 18 2 9� 30 122 18�

827 181 012 2 800 2�00 �0 2� 2 102 30 122 18�

827 181 013 3 12�0 31�0 �0 �0 2 130 3� 1�0 238

i

Acc

esso

ries



Cable-testing SocketTo be used when carrying out start-up tests on cables.Caution:The cable test socket is not touchproof. After testing, the test socket must be earthed and short-circuited. The cable test socket is not suitable for partial discharge measuring.

no. Size AC withstandvoltage

dC withstand voltage

Weight

1h (kV) 15 min. (kV) (kg)

827 125 001 1 �� .1

827 125 002 2 �2 �2 �.0

827 125 003 3 �� 9.3

ConnEX test CableThe flexible test leads are used for electric tests of equipment with installed CONNEX bushings.Especially suitable for voltage tests and partial discharge tests on transformers and gas-insulated switchgears.

i

Acc

esso

ries


test leadA = outdoor terminationB = flexible cableC = CONNEX separable connectorl1 = length of the test cablel2 = length of the screen wires

Other lengths and connecting cables with two separable connectors on request.

no. Size Max. ope-rating voltage


Rated light-ning impulse withstand voltage (BiL)

Cable cross section

Rated current in air at 30° C

l1 l2

Um (kV) 1min (kV) (kV) (mm2) (A) (m) (mm)

810 105 110 1 3� �0 1�0 9� ��0 1 300

810 105 113 1 3� �0 1�0 9� ��0 2 300

810 105 210 2 �2 9� 200 9� ��0 1 300

810 105 222 2 �2 9� 200 9� ��0 1.� 300

810 105 213 2 �2 9� 200 9� ��0 2 300

810 105 212 2 �2 9� 200 9� ��0 3 300

810 105 310 3 �2 9� 200 9� ��0 1 300

810 105 319 3 �2 9� 200 9� ��0 1.� 300

810 105 323 3 �2 9� 200 9� ��0 2 300

810 105 329 3 �2 9� 200 9� ��0 3 300

810 105 352 3-S �2 9� 2�0 9� ��0 1.� 300

810 105 391 3-S �2 9� 2�0 �00 980 1.� 300

29www.pfisterer.com

MV-ConnEX transformer Bushings, straight, up to 24 kVFor local grid transformers, the transformer connecting pieces are fitted instead of the DIN porcelain bushings on the medium voltage side.The insulation piece that extends into the transformer (dimensions l1 and l2) is available in different lengths in order to accommodate the type of transformer. The cables are connected using metal-encapsulated CONNEX cable connecting parts.On the 0.� kV side there are corresponding insulating caps which provide total protection against contact.

note:For an example of application, see picture overview of local grid transformers.

1

2

no. Size Max. opera-ting voltage

nominal current

threaded connection

Weight l1 l2 d e

Um (kV) in (A) f (kg) (mm) (mm) (mm) (mm)

827 115 004 0 2� 2�0 M8 2.1 133 128 �� 12� 1

827 158 001 0 2� 2�0 M12 3.� �8 - �� 130 2

827 159 001 1 2� �30 M12 3.3 �8 - �� 130 2

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



MV-ConnEX Elbow Adapters, up to 24 kVThe metal-encapsulated CONNEX elbow adapter is a component which can be used to convert straight CONNEX appliance connecting parts into CONNEX elbow appliance connecting parts. The system offers a connection that is rotated by 90°. One side is designed as a CONNEX cable connecting part size 0 or 1, the other side as a CONNEX appliance connecting part of the same size. The grounded metal housing provides total protection against contact.

note:For an example of application, see picture overview of local grid transformers.


nominal current Weight

Um (kV) in (A) (kg)

827 176 001 0 2� 2�0 �.3 1

827 180 001 1 2� �30 �.� 2

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


1

2

31www.pfisterer.com

MV-ConnEX transformer Elbow BushingsWhen installed, elbow bushings can be swiveled by 260°. After fixing the CONNEX sepa-rable connector, the elbow bushing can be locked. The grounded metal housing provides absolute protection against electric-shock hazard. A compression sleeve and a copper strand wire serve to establish a flexible connection between the 260° swivel-type elbow bushing and the transformer winding.Fastening in accordance with DIN 42538 flange A, flange thickness of the transformer cover max. 10 mm.


nominal current thread Weight l1

Um (kV) in (A) G (kg) (mm)

827 107 064 0 2� 2�0 M10 �.� ��

827 107 107 0 2� 2�0 M10 �.� 10�

827 107 168 0 2� 2�0 M10 �.8 1�8

827 117 064 1 3� �30 M1� �.8 ��

827 117 107 1 3� �30 M1� �.0 10�

827 117 168 1 3� �30 M1� �.2 1�8

Fixing setcomprises a flange ring, flat gasket, spring washers and hexagon nuts.

no.

827 190 017

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



Compression SleevesOnly these compression sleeves are approved for connection of MV-CONNEX transfor-mer elbow connector parts.For use with hexagonal compression dies.

no. for size Cross section Cu strand wire din 46438

diameter Cu strand wire

Pressing tool for thread

Pressing tool for Cu strand

l2

(mm2) Ø (mm) G H (mm)

560 320 001 0 10 �.0 KZ 1� KZ 8 3� 1

560 320 007 0 3� 10.0 KZ 1� KZ 1� �2 1

560 320 005 0 �0 1�.2 KZ 1� KZ 18 �0 1

560 320 002 1 10 �.0 KZ 20 KZ 8 38 2

560 320 003 1 3� 10.0 KZ 20 KZ 1� �2 2

560 320 004 1 �0 12.0 KZ 20 KZ 1� �2 2

560 320 006 1 120 19.� KZ 22 KZ 2� �0 2

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


1

2

33www.pfisterer.com

Picture overview of local grid transformers i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



MV-ConnEX Multi-Contact Elbow Bushingsthe multiple elbow connecting pieces are fitted instead of the din porcelain bu-shings on the medium voltage side of the power transformer.

The multiple elbow connecting pieces consist of an insulation body that is integrated in a metal housing or in the new compact design, aluminium flame sprayed and is connected with a maximum of 2 or � cables using CONNEX cable connectors sizes 2 or 3.The earthed metal housing and the earthed layer of aluminium provide total protection against contact and is suitable for offshore applications.Unassigned connectors must be closed using dummy plugs such that they are voltage-proof.

External environmental influences, such as small animals and birds, cannot cause short circuits. Plug-in enclosed surge arresters can be fitted instead of a CONNEX cable con-nectors. The electrical connections in the transformer can be in the form of either clamps or plugs.

For power transformers suitable for fastening in accordance with DIN �2�38, resistant to outside air.

Order connectors separately.

Cold shock tests in accordance with VDE 0��1.

Caution:The CONNEX cable dummy plugs are not provided and must be ordered separately.

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



MV-ConnEX Multi-Contact Elbow Bushings i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



MV-ConnEX double-Contact Elbow Bushings, up to 52 kVFor plug-in and clamping type construction respectively.With aluminium housing.

A Plug-in type connecting partB Clamping type connecting part (supplied by the transformer manufacturer)


max. rated current with plugged connec-tion in transformer - type A

max. rated current with clamped connec-tion in transformer - type B

a b c d e f g h

Um (kV) max. in (A) max. in (A) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

827 661 002 2 �2 12�0 12�0 180 110 30 12� 90 388 21� 303

827 661 001 2 �2 1�00 1�00 200 13� 3� 12� 12� 388 21� 303

827 661 004 2 �2 1�00 1�00 200 13� 3� 300 12� 388 21� 303

827 660 001 3 �2 2200 2�00 200 13� 3� 12� 12� ��1 2�� 380

827 660 003 3 �2 2200 2�00 200 13� 3� 300 12� ��1 2�� 380

827 660 004 3 �2 2200 2�00 200 13� 3� 12� 12� ��1 2�� 380

827 660 006 3 �2 2200 2�00 200 13� 3� 300 12� ��1 2�� 380

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



Plug-in type Connecting Part (A)

no. for ConnEX twin elbow connecting parts

for ConnEX 4-elbow connecting parts

Weight

(kg)

827 128 710 82� ��1 002 82� 12��1� 2.�

827 128 730 82� ��1 00182� ��0 00182� ��0 00�82� ��0 00�82� ��1 00�

82� 12� �2�82� 1�� 33�82� 1�� 33�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

2.8

Fixing setFor save fixing and sealing of MV-CONNEX Elbow Bushings at transformers. Comprises a flange ring, flat gasket, spring washers and hexagon nuts.

no. a for ConnEX twin elbow connecting parts


(mm)

827 190 016 180 82� ��1 002 82�12� �1�

827 190 015 200 82� ��1 00182� ��1 00�82� ��0 00182� ��0 00382� ��0 00�82� ��0 00�

82� 12� �2�82� 12� 82�82� 1�� 33�82� 1�� 33�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



Power transformers, on the low-voltage side with multi-contact elbow bushings up to 52 kVi

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


39www.pfisterer.com

Power transformers, on the low-voltage side with multi-contact elbow bushings up to 52 kV i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


�0 www.pfisterer.com

MV-ConnEX Quadruple-Contact Elbow Bushings, up to 52 kVFor plug-in and clamping type construction respectively.With aluminium housing.

A Plug-in type connecting part.B Clamping type connecting part (supplied by the transformer manufacturer)




a b c d e f g h

Um (kV) max. in (A) max. in (A) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

827 124 716 2 �2 12�0 12�0 180 110 30 12� 90 38� 3�� 29�

827 124 727 2 �2 2200 31�0 200 13� 3� 12� 12� 38� 3�� 29�

827 124 827 2 �2 2200 31�0 200 13� 3� 300 12� 38� 3�� 29�

827 146 336 3 �2 2200 31�0 200 13� 3� 12� 12� ��9 390 3��

827 146 337 3 �2 2200 31�0 200 13� 3� 12� 12� ��9 390 3��

827 146 836 3 �2 2200 31�0 200 13� 3� 300 12� ��9 390 3��

827 146 837 3 �2 2200 31�0 200 13� 3� 300 12� ��9 390 3��

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


�1www.pfisterer.com




Weight

(kg)

827 128 710 82� ��1 002 82�12��1� 2.�

827 128 730 82� ��1 00182� ��0 00182� ��0 00382� ��0 00�82� ��0 00�82� ��1 00�

82� 12� �2�82� 1�� 33�82� 1��3 3�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

2.8


no. a for ConnEX twin elbow connecting parts


(mm)

827 190 016 180 82� ��1 002 82� 12� �1�

827 190 015 200 82� ��1 00182� ��1 00�82� ��0 00182� ��0 00382� ��0 00�82� ��0 00�

82� 12� �2�82� 12� 82�82� 1�� 33�82� 1�� 33�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs



MV-ConnEX Quadruple-Contact Elbow Bushings, up to 52 kVFor plug-in and clamping type construction respectively.With aluminium flame sprayed surface and integrated voltage tap.

A Plug-in type connecting partB Clamping type connecting part (supplied by the transformer manufacturer)




a b c d e f g

Um (kV) max. in (A) max. in (A) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

827 678 001 3 �2 2200 31�0 200 13� 3� 12� 12� �03 332

827 678 002 3 �2 2200 31�0 200 13� 3� 300 12� �03 332

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs






Weight

(kg)

827 128 710 82� ��1 002 82� 12� �1� 2.�

827 128 730 82� ��1 00182� ��0 00182� ��0 00382� ��0 00�82� ��0 00�82� ��1 00�

82� 12� �2�82� 1�� 33�82� 1�� 33�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

2.8


no. A for ConnEX twin elbow connecting parts


(mm)

827 190 015 200 82� ��1 00182� ��1 00�82� ��0 00182� ��0 00382� ��0 00�82� ��0 00�

82� 12� �2�82� 12� 82�82� 1�� 33�82� 1�� 33�82� 1�� 83�82� 1�� 83�82� ��8 00182� ��8 002

i

MV-

Co

nn

EX t

rans

form

er B

ushi

ngs


�� www.pfisterer.com

MV-ConnEX Switchgear Elbow BushingsFor switchgears and motors.

no. Size nominal current

Max. opera-ting voltage air

Max. opera-ting voltage SF6-gas

Max. opera-ting voltage oil

thread Weight l1

in (A) Um (kV) Um (kV) Um (kV) G (kg) (mm)

827 109 107 0 2�0 � 2� 2� M10 �.� 10�

827 119 107 1 �30 � 3� 3� M1� �.9 10�

Compression SleevesOnly these compression sleeves are approved for connection of MV-CONNEX transfor-mer elbow connector parts.For use with hexagonal compression dies.

i

MV-

Co

nn

EX B

ushi

ngs


no. for size Cross section Cu strand wire din 46438

diameter Cu strand wire

Pressing tool for thread

Pressing tool for Cu strand

l2

(mm2) Ø (mm) G H (mm)

560 320 001 0 10 �.0 KZ 1� KZ 8 3� 1

560 320 007 0 3� 10.0 KZ 1� KZ 1� �2 1

560 320 005 0 �0 1�.2 KZ 1� KZ 18 �0 1

560 320 002 1 10 �.0 KZ 20 KZ 8 38 2

560 320 003 1 3� 10.0 KZ 20 KZ 1� �2 2

560 320 004 1 �0 12.0 KZ 20 KZ 1� �2 2

560 320 006 1 120 19.� KZ 22 KZ 2� �0 2

1

2

��www.pfisterer.com

MV-ConnEX Bushings up to 52 kV i

MV-

Co

nn

EX B

ushi

ngs



MV-ConnEX appliance connecting parts, up to 42 kV,hexagon versionFor fitting in: switching stations, circuit breaker units, high-voltage motors, condensers, and other appliances. Insulating medium: SF� gas max. operating temperature of insulating medium: 90°C

no. no. with sealing and fixing set

Sealing Form Size Max. operating voltage

nominal current Capacitive voltage tap

Weight

Um (kV) in (A) (pF) (kg)

827 106 401 827 106 601 hexagonal 1 3� �30 — 2.0

827 106 411 827 106 611 hexagonal 1 3� �30 � ± 1,� 2.0

827 106 402 827 106 602 hexagonal 2 �2 800 — 2.1

827 106 412 827 106 612 hexagonal 2 �2 800 � ± 1,� 2.1

MV-ConnEX appliance connecting parts, up to 42 kV,round versionFor fitting in: switching stations, circuit breaker units, high-voltage motors, transformers, condensers, connecting sleeves and other appliances. suitable for use in transformersinsulating medium: SF� gas or oilmax. operating temperature of insulating medium: 110°CAttention: With XLPE-insulated cable the max. temperature of the conductor may not be higher than 90°C.


Sealing Form Size Max. operating voltage


Um (kV) in (A) (kg)

827 104 005 82� 10� 20� round 2 �2 800 2.8

MV-ConnEX appliance connecting parts, up to 52 kV,hexagon versionFor fitting in: switching stations, circuit breaker units, high-voltage motors, condensers, connecting sleeves and other appliances.insulating medium: SF� gas or oilmax. operating temperature of insulating medium: 90°CAttention: With XLPE-insulated cable the max. temperature of the conductor may not be higher than 90°C.*) suitable for use in transformers; max. operating temperature of insulating medium: 110°C


Sealing Form Size Max. opera-ting voltage

nominal current

Capacitive voltage tap

Weight

Um (kV) in (A) (pF) (kg)

827 110 010 82� 110 210 hexagonal 3 �2 12�0 — �.� -

827 110 011 82� 110 211 hexagonal 3 �2 12�0 1� �.2 -

827 110 012 82� 110 212 hexagonal 3 �2 12�0 — �.� *)

i

MV-

Co

nn

EX B

ushi

ngs



o-Ring Sealings

no. Suitable for dimensions Form Material

(mm)

021 937 087 82� 10� 00182� 10� 01182� 10� 00282� 10� 012

112 x � hexagonal FKM (Viton)

021 937 069 82� 110 00182� 110 00882� 110 009

13� x � hexagonal FKM (Viton)

021 937 070 82� 10� 00� 118 x � round FKM (Viton)

i

MV-

Co

nn

EX B

ushi

ngs



MV-ConnEX insulator, up to 24 kVFor indoor equipment (insulating capacity: list 2).

By using appliance connecting isolators air-insulated switching stations can be equipped with shock-proof cable connections. Switching and cable connection areas can thus be easily sheltered. The size 1 and 2 appliance connecting isolators are suitable to be fitted to sheets that are 2 - 2.� mm thick.

Breaking force Pn = �kNCreepage distance 3�0 mmSuitable for outdoor use up to Um = � kV


nominal current

diameter c diameter d terminal pin

Weight

Um (kV) in (A) Ø (mm) Ø (mm) a (kg)

827 113 011 1 2� �30 �2 9� M12 3.9 Silicone-free pro-duction process

827 113 001 1 2� �30 �2 9� M12 3.9 -

827 113 003 2 2� 800 �8 102 M12 �.� -

i

MV-

Co

nn

EX B

ushi

ngs



MV-ConnEX insulator, up to 36 kVThe size 3 appliance connecting isolators are suitable to be fitted to sheets that are 6 - 18 mm thick.

For indoor equipmentbreaking force Pn = 10 kNCreepage distance ��0 mmSuitable for outdoor use up to Um = 2� kV



Um (kV) in (A) (kg)

827 177 001 3 3� 12�0 1�.�

i

MV-

Co

nn

EX B

ushi

ngs


Air-insulated Switchgear with MV-CONNEX Insulator up to 3� kV


MV-ConnEX outdoor insulatorsFor tower substations.

The outdoor insulator permits the transition from the overhead line to the metal-enclosed touchproof cable termination inside tower substations. This insulator is designed as a bushing insulator with integrated female contact part for CONNEX separable connectors.Linked to other metal-enclosed equipment such as

■ CONNEX elbow adapters■ CONNEX separable connectors■ CONNEX transformer bushings■ transformer terminal clamps with covers■ metal-enclosed ring main units

the outdoor insulator offers the possibility of an absolutely intrinsically safe construction of tower substations. Cantilever strength Pn = � kN.

no. Size Max. opera-ting voltage

nominal current

terminal pin Weight a c d e

Um (kV) in (A) (kg) (mm) (mm) (mm) (mm)

827 173 002 2 2� 800 M2� 13.0 12� 92 298 193

i

MV-

Co

nn

EX B

ushi

ngs



FLinK bus-bar Couple SystemTo connect (coupling) the bus-bar of SF�-insulated switchgears.

1

2

3

no. Max. operating voltage

nominal current Weight Packing unit

Um (kV) in (A) (kg)

819 001 024 Coupling plug 2� �30 0.8 1 1

839 001 024 Coupling plug 2� �30 2.� 3 1

819 002 002 Bushing including sea-ling and securing ring

2� �30 0.� 1 2

839 002 002 Bushing including sea-ling and securing ring

2� �30 1.9 3 2

819 003 001 Dummy Plug 2� �30 0.� 1 3

839 003 001 Dummy Plug 2� �30 1.2 3 3

i

Bus

-Bar

Cou

ple

Syst

em



Bus-bar Couple System, Size 2 compatible


nominal current Weight Packing unit

Um (kV) in (A) (kg)

839 004 003 Coupling plug, incl. ground wire 2 �2 800 �.3 3

839 005 001 CONNEX appliance connecting parts, with vol-tage tap, incl. fastening flange (566 432 001), seal (021 193 �8�), screw (023 ��0 002), helical spring (020 99� 99�), grounding spring (�12 92� 033)

2 �2 800 �.� 3

839 004 002 Coupling plug, incl. ground wire 2 �2 12�0* 10.0 3

dummy Cable Connector■ for sealing and voltage-proof closing of CONNEX bushings.■ suitable for outdoor use or offshore-/soil-proof


Use 1 Packing unit Weight

Um (kV) (kg)

827 150 003 2 �2 aboveground 1 0.�

i

Bus

-Bar

Cou

ple

Syst

emMV-ConnEX Pluggable Connection System

To connect (coupling) the bus-bar of SF�-insulated switchgears.Application only with CONNEX-bushings size 2 with voltage tap which must always be earthed!

*) only with bushings with voltage tap and copper contact bushing (No. 82� 10� 112)


MV-ConnEX Branching SystemGiven the diminishing financial framework within which electricity companies are now forced to operate, the most important present-day requirements for any change or new investment in everyday operations are cost effectiveness and competitiveness.

Instead of conventional shrink-fit or push- on sealing ends, pluggable, metal-clad cable connectors of the internal cone type have proved their worth in practice. Rather than ex-pensive switching installations that require maintenance at specific intervals, an alterna-tive is available in the form of branch joints of a size appropriate to the space available, e.g. from secondary substations with adequate space to connect and disconnect cables, to compact plastic housings for the retrospective connection of a tap line. The capacitive voltage tap at the cable connector provides for a reliable, continuous voltage indication at the site. Branch joints can be configured in a variety of ways, permitting adaption and expansion at any time. The use of silicone for insulating purposes and diecast aluminium for housings mean that they can be manufactured at low cost. Aluminium diecast hou-sings are suitable for use outdoors and in cable shafts.

Here again, the comprehensive CONNEX product range, with test fittings, grounding and short-circuiting devices, and a voltage testing system, offers all the advantages of a pluggable, maintenance-free, shockproof, medium-voltage cable connection.

MV-ConnEX Branching System, Size 1, Um = 24 kV, in = 630 AConsisting1 Unit Metal frame1 Unit DSA-i33 Unit Dummy-plug with voltage tap3 Unit �-way joints1 Unit KVS Polyester housing1 Unit Polyester base


nominal current Width Height depth Weight

Um (kV) in (A) (mm) (mm) (mm) (kg)

827 219 002 1 2� �30 800 12�0 �� 1�0.0

i

MV-

Co

nn

EX C

onne

ctin

g an

d B

ranc

hing

Sys

tem



dummy Plug with Voltage tap


l1 d1 d2 Weight

Um (kV) (mm) (mm) (mm) (kg)

827 213 011 1 2� 121 9� 112 1.0

827 213 013 3 3� 1�0 130 1�� 1.�

i

MV-

Co

nn

EX C

onne

ctin

g an

d B

ranc

hing

Sys

tem



MV-ConnEX Cable JointsFor above and below ground use.Caution:For use underground or offshore the bell flanges of the cable connectors must be made of bronze.

Single-pole, resistant to outside air, soil-resistant, offshore-proof, plug-in type.

The single-pole connection sleeve is supplied as factory-built; the contact bushings are integrated into the soil-resistant insulating body. The connection is established by inser-ting the CONNEX cable connector.

Cast shieldings guarantee short-circuit-resistant cable shielding.

Size 3Cast shieldings guarantee short-circuit-resistant cable shielding up to max. 9� mm².

*) The use of a heat-shrink tubing at the CONNEX cable connectors eliminates the soil sensitivity. The shrink tubing is provided. (2)Soil sensitivity can not be eliminated at size 3. (Shrinking on a heat-shrink tubing is not possible with cable joint size 3.)

1

2


nominal current

type Length diameter Width Height Weight

Um (kV) in (A) (mm) Ø (mm) (mm) (mm) (kg)

827 212 001 1 3� �30 not insulated against the soil

2�3 1�3 - - �.8 1

827 212 002 1 3� �30 not soil sensi-tive *

2�3 1�3 - - �.� 1

827 222 001 2 �2 800 not insulated against the soil

2�3 1�3 - - �.8 1

827 222 002 2 �2 800 not soil sensi-tive *

2�3 1�3 - - �.� 1

827 228 001 3 �2 12�0 not insulated against the soil

�� - 20� 209 28.0 2

i

MV-

Co

nn

EX C

onne

ctin

g an

d B

ranc

hing

Sys

tem


A B

A

B

A

B


MV-ConnEX-t-jointSingle-pole, metal-encapsulated, resistant to outside air, soil-resistant.The connection is established by inserting the CONNEX cable connector.Cast shieldings additionally guarantee a short-circuit-resistant cable shielding connec-tion.In the event of network modifications, the underground T-joints can be replaced by CON-NEX cable joints.

Using this T-joint and the CONNEX coupling connector, switching stations that are equip-ped with CONNEX appliance connecting parts can later be expanded to become twin connections. In addition, a plug-in cable branch wire can also be realised.

The single-pole T-joint is provided wired ready for connection. The CONNEX contact bushings are integrated in the soil-resistant insulating bodies.

*) MV-CONNEX Coupling Connector, is available only in size 2

Measurements of size 1 and size 2 (size 3 on request)


nominal current type Weight

Um (kV) in (A) (kg)

827 147 001 1 3� �30 with metal housing, not soilproof

21.0 1

827 147 002 2 �2 800 with metal housing, not soilproof

21.0 1

827 221 001 1 3� �30 soilproof 1�.� 2

827 221 002 2 �2 800 soilproof 1�,� 2

827 227 001 3 �2 12�0 soilproof ��,02 3

i

MV-

Co

nn

EX C

onne

ctin

g an

d B

ranc

hing

Sys

tem


1

2

3


MV-ConnEX Coupling Connector, up to 42 kVFor the coupling of equipment and switchgear. This coupling connector permits easy electric coupling of different components fitted with CONNEX bushings.

The metal flange assures that the mechanical connection of the two components is coupled at minimum distance.

no. Size Max. operating voltage nominal current Weight

Um (kV) in (A) (kg)

827 138 002 2 �2 800 �.2

i

MV-

Co

nn

EX C

onne

ctin

g an

d B

ranc

hing

Sys

tem



Earthing and Short-Circuiting devicesThese devices permit the grounding and short-circuitting of equipment fitted with CON-NEX Bushings (e.g. switchgear, transformers) and cable, fittend with CONNEX Separab-le Connectors.

Earthing and Short-circuit device for ConnEX bushingsEarthing and Short-Circuiting Devices, three-pole, matching CONNEX separable connec-tors to EN �0180, EN �0181, DIN �� 3�

Application:Indoor and outdoor use

no. Version *) Size Max. short circuiting current

Cable cross section

Cable length Line clamp Earth clamp

iK 1s (kA) (mm2) a/b/d/c (mm)

369 203 001 01�� 1 29.� 1�0 / �0 �00/�00/�00/1�00 Connection for CONNEX-Bushing Size 1

E2

369 203 001 0180 2 29.� 1�0 / �0 �00/�00/�00/1�00 Connection for CONNEX-Bushing Size 2

E2

369 203 001 01�� 3 29.� 1�0 / �0 �00/�00/�00/1�00 Connection for CONNEX-Bushing Size 3

E2

i

MV-

Co

nn

EX E

arth

ing

and

Shor

t-Circ

uit d

evic

esMV-ConnEX Pluggable Connection System


Earthing and Short-circuit device for ConnEX separable connec-torsEarthing and Short-Circuiting Devices, three-pole, matching CONNEX Bushings to EN �0180, EN �0181, DIN �� 3�

Application:Indoor and outdoor use

no. Version *) Size Max. short cir-cuiting current

Cable cross section

Cable length Line clamp Earth clamp

iK 1s (kA) (mm2) a/b/d/c (mm)

369 203 001 0182 1 29.� 1�0 / �0 �00/�00/�00/1�00 Connection for CONNEX-Plug Size 1

E2


E2


E2

tilting operating poleTilting operating pole for CONNEX earthing and short-circuiting devices (to be ordered separately).

no. Length

(mm)

827 137 001 �13

827 148 001 100�

i

MV-

Co

nn

EX E

arth

ing

and

Shor

t-Circ

uit d

evic

es



MV-ConnEX Surge ArresterFeatures of MV-ConnEX Surge Arrester, pluggable■ Metal-enclosed ■ High short-circuit protection■ Fully-insulated ■ Maintenance-free■ touchproof ■ For outdoor and offshore use■ free from arcing ■ Protection class IP��

Scope of ApplicationCONNEX surge arresters are used for the protection of metal-enclosed switchgears and transformers equipped with plug-in type bushings acc.EN �0180 / �0181. The separable surge arrester is installed on the switchgear/transformer to prevent the intake of unduely high overvoltages. The surge arrester limits particularly those overvoltages that are produced by the reflection of traveling waves. When using these surge arresters for switchgears/transformers connected to the transmission line via a cable route, it is necessary to protect the transition between the cable and the transmission line with suitable arresters. the capacity of protection is specially coordinated with the switchgear‘s resistance to surge voltages, considering at the same time the space arrangement and the level of electrical protection.

SpecificationsThe Standards for surge arresters (DIN VDE 0��, Part �/0�.9� and IEC 99-�) are appli-cable to these devices. The dimensions of the plug-in termination system comply with EN �0180/EN �0181.

designThe live part consists of metal oxide resistors without spark gap. The resistors possess a high thermal stability ensured by suitable dimensioning. These live parts are enclosed by a silicone rubber jacket that provides insulation against the metal housing.The corro-sion-resistant aluminium housing renders the surge arrester intrinsically safe and thus assures optimal safety for operating personnel. The metal housing provides a hermetic sealing of the live parts against environmental influences, such as moisture or pollution. The plug-in connector is designed to fit the inside cone plug-in termination system acc. EN �0180/EN �0181. It is available in sizes 1, 2 and 3. The arrester is equipped with a corrosion-resistant fracture membrane that opens the arrester in case of an internal fault and allows a defined axial pressure relief on the bottom of the arrester without damaging the plug-in system.

i

MV-

Co

nn

EX S

urge

Arr

este

rMV-ConnEX Pluggable Connection System

Selection parametersSelection of the Rated VoltageThe selection of the rated voltage depends on the maximum operating voltage of the system as well as on the type of neutral point. The selection is done in accordance with the following table, for example:■ Um = 2� kV maximum permissible operating voltage of the installation■ Type of neutral point: insulated. According to the table below, the rated voltage of the arrester to be selected is Ur = 30 kV.noteWith compensated or insulated systems, the continuous voltage Uc of the arrester must be equal to the maximum operating voltage Um. if the selected continuous voltage is too low, this can lead to a failure of the surge arrester.

Highest permitted rated voltage of the equipment (GiS/tRAnSFoRMER)

Rated voltage, insulated or compensated

Rated voltage, solidly earthed system (earth fault factor up to 1.7)

Um (kV) Ur (kV) / Uc (kV) Ur (kV) / Uc (kV)

7.2 9 / �.2 �.2 / �

12 1� / 12 12 / 9.�

14.5 19 / 1� 1� / 12

17.5 22 / 1�.� 18 / 1�

24 30 / 2� 2� / 19

36 �� / 3� 3� / 29

42 �2 / �2 �2 / 33


ConnEX Surge Arrester, 10 kA

w

i

MV-

Co

nn

EX S

urge

Arr

este

r


technical dataLine discharge class 1 Energy absorption capacity 2 kJ/kVRatedRated discharge surge current 10 kA, 8/20 µs High peak current �� kA, �/10 µsLong-wave peak current 2�0 A, 2 ms Short-circuit withstand current 1� kA, 0,2 s

no. Size Max. rated voltage

Max. continuous rating

Length l thickness d dimension x Weight

Ur (kV) Uc (kV) 5 kA8/20 μs(kV)

10 kA8/20 μs(kV)

steep impulse1/20 μs (kV)

(mm) (mm) (mm) (kg)

827 513 075 1 �.� � 20 22 23 3�0 �� 3.�

827 513 090 1 9 � 2� 2� 29 3�0 �� 3.�

827 513 125 1 12.� 10 3� 3� �0 3�0 �� 3.�

827 513 150 1 1� 12 �0 �� 3�0 �� 3.�

827 513 175 1 1�.� 1� �� 1 �� 3�0 �� 3.�

827 513 190 1 19 1� �1 �� 0 3�0 �� 3.�

827 513 215 1 21.� 1� �8 �3 �� 3�0 �� 3.�

827 513 240 1 2� 19 �� 0 �� 3�0 �� 3.�

827 513 300 1 30 2� 80 8� 9� 3�0 �� 3.�

827 513 360 1 3� 29 9� 10� 112 3�0 �� 3.�

827 523 075 2 �.� � 20 22 23 3�0 �� 3.�

827 523 090 2 9 � 2� 2� 29 3�0 �� 3.�

827 523 125 2 12.� 10 3� 3� �0 3�0 �� 3.�

827 523 150 2 1� 12 �0 �� 3�0 �� 3.�

827 523 175 2 1�.� 1� �� 1 �� 3�0 �� 3.�

827 523 190 2 19 1� �1 �� 0 3�0 �� 3.�

827 523 215 2 21.� 1� �8 �3 �� 3�0 �� 3.�

827 523 240 2 2� 19 �� 0 �� 3�0 �� 3.�

827 523 300 2 30 2� 80 8� 9� 3�0 �� 3.�

827 523 360 2 3� 29 9� 10� 112 3�0 �� 3.�

827 527 450 2 �� 3� 120 131 1�0 �00 98 �� .�

827 527 510 2 �1 �0.8 13� 1�� 1�8 �00 98 �� .�

827 527 525 2 �2.� �2 139 1�2 1�3 �00 98 �� .�

827 537 075 3 �.� � 20 22 23 �90 98 80 �.2

827 537 090 3 9 � 2� 2� 29 �90 98 80 �.2

827 537 125 3 12.� 10 3� 3� �0 �90 98 80 �.2

827 537 150 3 1� 12 �0 �� 90 98 80 �.2

827 537 175 3 1�.� 1� �� 1 �� 90 98 80 �.2

827 537 190 3 19 1� �1 �� 0 �90 98 80 �.2

827 537 215 3 21.� 1� �8 �3 �� 90 98 80 �.2

827 537 240 3 2� 19 �� 0 �� 90 98 80 �.2

827 537 300 3 30 2� 80 8� 9� �90 98 80 �.2

827 537 360 3 3� 29 9� 10� 112 �90 98 80 �.2

827 539 450 3 �� 3� 120 131 1�0 �90 98 80 �.2

827 539 510 3 �1 �0.8 13� 1�� 1�8 �90 98 80 �.2

827 539 525 3 �2.� �2 139 1�2 1�3 �90 98 80 �.2

Max. residual voltage Ures at


ConnEX Motor Connector (CMA) / ConnEX Star Point Connector (CMS), Size 1Special features■ metal-enclosed■ fully-insulated■ touchproof■ high short-circuit protection■ suitable for outdoor use■ separable into two parts■ degree of protection IP ��■ up to 11 kV E Exe

i

MV-ConnEX Pluggable Connection SystemM

V-C

on

nEX

CM

A- a

nd C

MS-

Syst

em


ConnEX Motor Connector (CMA) / ConnEX Star Point Connector (CMS), Size 1 i

MV-

Co

nn

EX C

MA

- and

CM

S-Sy

stem



CMA ConnEX Motor Connector, Size 1The CMA CONNEX Motor Connector permits the simple and quick connection of high-voltage motors, providing at the same time a completely metal-enclosed and intrinsically safe connector area.The system is easily connected instead of the motor terminal box. It permits quick start-up and quick motor change in operation.

Attention:CONNEX separable connectors size 1 for single and three core cables up to 10 kV / 2�0 mm2 respectively 20 kV / 18� mm2 must be ordered separately.

no. nominal voltage Rated short-time withstand current

Weight

(kV) 1 s (kA) (kg)

827 670 003 11 �0 EExe 32.�

827 670 002 13.8 �0 - 33.�

CMS ConnEX Motor Star Point Connector, Size 1The CMS-CONNEX Star Point Connector allows a simple and quick metal-enclosed and dead front safe star point connection. Thereby, the on-site change from the connecting side to the star-point side of the motor can occur easily. Interchangeability of cable con-nection and star point (outlet) on the HV motor.

no. nominal voltage Weight

(kV) (kg)

827 671 001 11 EExe 3�.2

i

MV-

Co

nn

EX C

MA

- and

CM

S-Sy

stem



Assembly Accessories

Assembly tools for Motor Connectorconsisting of:assembly jig; drawing device; soldering device; assembly rods

no.

827 154 001

disassembly Bridge and Assembly Leverfor Motor Connector and Star Point Bridge

no.

827 154 002

i

MV-

Co

nn

EX C

MA

- and

CM

S-Sy

stem




Voltage detecting systems that meet Standard EN �12�3-�:2001 are used for ensuring absence of voltage in metal-enclosed switchgear and transformers. As the live compo-nents in these systems cannot be contacted with voltage detectors, it is necessary to use voltage detecting systems that can clearly identify and indicate a capacitively coupled out signal as an operating voltage. This signal is coupled out by the integrated coupling electrodes that may be integrated in various components:■ Post-type insulator with capacitive voltage divider■ Transducer■ Bushings■ Duresca rails■ Outside/inside cone cable terminations

Voltage detection systems used for both medium and high voltages.

Standard EN 61243-5:2001 generally distinguishes between two systems, which define the interface conditions for the reliable operation of voltage detecting systems:■ HR systems (high resistance system)■ LRM systems (low resistance systems)

PFISTERER supplies the following components for both systems:■ Voltage detecting systems■ Connection materials such as connecting cables and connector strips■ Testing systems for testing voltage detecting systems■ Testing systems for testing interfaces■ Phase comparators

Our voltage detection systems are optimised for PFISTERER CONNEX connection technology components.

ii

Volta

ge d

etec

ting

Syst

ems



indicatorsThese indicators show when operating voltage is present.

Continuous Voltage indicator dSA-2The dSA-2 continuous voltage indicator is a plug-in indicator for the HR system. It allows capacitively coupled out voltages to be checked for absence of voltage.

technical description:■ No external power required■ Voltage indicator with flashing red LED■ All-insulated system (IP��) made of impact-resistant plastic with cast-on CEE plug connector■ Functioning test possible on the 230 V AC plug socket■ EURO-Test HR in-service test possible■ Suitable for all climatic zones

no.

827 161 005

Continuous Voltage indicator dSA-LRMThe dSA-LRM continuous voltage indicator is a plug-in indicator for the LRM system. It allows capacitively coupled out voltages to be checked for absence of voltage.

technical description:■ No external power required■ Voltage indication by flashing red LED■ All-insulated system (IP��) made of impact-resistant plastic■ Integrated connector pins with seal for interface■ In-service test possible with Euro-Test LRM■ Suitable for all climate zones

no.

827 020 001

ii

indi

cato

rs



integrated Voltage detecting System dSA-i3The DSA-i3 integrated voltage detecting system has an integrated indicator. It is desired for use in switchgear. An additional display removes the need for in-service tests. This voltage detecting system is therefore particularly maintenance-free, reliable and cost-effective when used in continuous operation.

technical description:■ No external power supply required■ Red LCD display■ Test sockets available for phase comparison■ Additional third socket for testing the integrated LCD display■ Secure cover for sockets■ Sensible test process using three feeler pins■ Integrated breaking point for voltage-limiting■ Simple assembly■ No in-service test required

no. Version nominal frequency

threshold voltage

input impedance

Additional capacitance C2L

fn (Hz) (V) (MΩ) (nF)

827 216 004 0008 �0...�0 �...� 2 —

827 216 004 000� �0...�0 �...� 2 2.2

827 216 004 000� �0...�0 �...� 2 3.3

827 216 004 000� �0...�0 �...� 2 10

827 216 004 0009 �0...�0 �...� 2 33

827 216 004 0010 �0...�0 �...� 2 ��

Assembly BracketThis practical assembly bracket is available for mounting the DSA-i3 integrated voltage detection system outside front panels.

no.

993 008 002

ii

indi

cato

rsVoltage detecting Systems


interfaces and Connecting LeadsPFISTERER offers a range of interfaces and connecting leads for connecting indicators.Connecting leads on request.

three-pole interfaces for HR-SystemThis three-pole interface for HR systems is designed as a measuring and testing block with safety socket and earth socket. It can be mounted on switchgear.

note:To meet the standard, this interface must also be equipped with a rated breaking point for voltage limiting. The interface, the terminals on the coupling element, and the rated breaking point must be protected against humidity.

no.

560 915 001

Single-pole interface for HR-SystemThis single-pole interface for HR system is designed as a test socket. It can be moun-ted anywhere near the capacitive tap.

note:The standard requires that this interface is also to be equipped with a rated breaking point for voltage limiting. The interface, the terminals on the coupling element, and the rated breaking point must be protected against humidity.

no.

827 668 001

ii

inte

rfac

es a

nd C

onne

ctin

g Le

ads



testers for Continuous Voltage indicatorsThese testers can be used to carry out functioning tests on continuous voltage indicators. They can also be used for the in-service test. These testers are operated from a mains power outlet and, during the function test, simulate the minimum response threshold specified in the standard.

EURo-test HRThe EURO-Test HR is suitable for checking the continuous voltage indicator of HR systems.

no. Min. threshold voltage

Min. threshold current

Permissibleambient temperature

Standby indication

Utmin (V) itmin (µA) (°C)

827 160 001 90 2.� -2� ... +�� LED

EURo-test LRMThe EURO-Test LRM is suitable for testing the continuous voltage indicator of LRM systems.

no. Min. threshold voltage

Min. threshold current

Permissible ambient temperature

Standby indication

Utmin (V) itmin (µA) (°C)

827 160 003 � 2.� -2� ... +�� LED

ii

test

ers



testers for interfacesThese testers can be used for testing the interface.

MP-testThis MP tester is suitable for testing the interfaces on HR systems and LRM systems. It can be used in connection with a multimeter.

no.

827 094 001

testers for Continuous Voltage indicators and interfacesPFISTERER offers testers for continuous voltage indicators and interfaces in one set.

test BoxThis text box contains testers for continuous voltage indicators and interfaces, and for the HR and LRM systems.

technical description:■ Practical storage case with foam lining■ Multimeter■ MP test■ HR EURO test■ LRM EURO test

no.

827 092 002

ii

test

ers



Phase Comparators for interfaces and Measuring PointsPhase comparators that meet standard EN �12�3-�:2001 can be used to carry out phase comparisons on interfaces and measuring points.

Electronic Phase Comparators EPVThe EPV universal phase comparator allows phase comparison on interfaces and measuring points. It can be used for the HR system as well as the LRM system. It also allows checks for absence of voltage and tests on the interface.

technical description:■ Integrated test leads■ Touchproof testing■ Function test and battery check with integrated self-test■ Integrated voltage indication■ Active phase balance indication by two LEDs (green=phase balance; red=phase unbalance)■ Interface control

no. Version Scope of application nominal frequency Adapter für HR-System

geeignete tasche

fn (Hz)

827 189 008 000� LRM �0...�0 82� 21� 002 9�0 318 003

827 189 008 000� LRM �0...�0 82� 21� 002 3�� 889 001

twinpole Adapter LRM – HR-systemThis twinpole adapter allows the chance to compare two phases with the phase compa-rator EPV at HR interface.

no.

827 217 002

CaseTwo different types of cases are to be available for the electronic phase comparator EPV. Design 2 offers some different pockets for the phase comparator, the adapter and additional measuring cables.

1

2 no.

970 318 003 1

364 889 001 2

ii

test

ers



in-service test for Phase Comparators EPVWe provide in-service tests for the EPV phase comparator.

PFISTERER have been successfully carrying out these in-service tests on their own test equipment for many years. And this is how the EPV phase comparator is tested.

When the tests are completed, the results are documented in detail.

To request an In-service test, please contact your local sales agency.

For customers in Germany please use the following mailing address:

PFISTERER Kontaktsysteme GmbHBereich WiederholungsprüfungBahnhofstraße 3089�� Gerstetten - GussenstadtGermany

no.

200 000 018 EPV

ii

in-s

ervi

ce t

est f

or P

hase

Com

para

tors

EPV



no. Page

0001 743 005 2�001 743 007 2�001 743 008 2�001 743 009 2�001 743 016 2�002 756 011 2�003 010 011 2�020 839 023 2�020 839 025 2�020 839 026 2�020 839 027 2�021 937 069 ��021 937 070 ��021 937 087 ��023 998 010 2�023 998 01 2�

2200 000 018 �3

3300 438 441 22300 438 443 22300 438 445 22300 438 447 22300 438 448 22300 438 449 22300 438 451 22300 438 452 22300 438 453 22300 632 632 19300 632 635 19300 632 637 19300 632 639 19300 632 640 19300 641 001 19300 642 001 19305 051 051 20, 22305 063 063 20, 22305 675 001 20305 675 002 20305 675 003 20305 767 001 18305 768 001 20305 768 003 20305 799 002 19364 889 001 �2369 203 001 �8, �9

5545 036 002 2�546 004 009 20, 21546 078 002 2�546 078 003 2�546 078 004 2�546 078 007 2�546 078 009 2�

no. Page

546 078 010 2�546 133 001 2�558 003 001 19558 003 005 19558 003 006 19558 003 007 19558 003 008 19558 003 009 19558 003 010 19558 003 011 19558 003 012 19558 003 013 19558 003 014 19558 003 015 19558 003 016 19558 003 017 19558 003 018 19558 003 019 19558 003 02 19558 003 02 19558 003 022 19558 003 023 19558 003 024 19558 003 025 19558 228 007 2�558 228 008 2�559 214 001 20559 214 002 20559 214 003 20559 215 001 21559 223 002 20, 21559 224 001 21560 320 001 32, ��560 320 002 32, ��560 320 003 32, ��560 320 004 32, ��560 320 005 32, ��560 320 006 32, ��560 320 007 32, ��560 915 001 �9

6617 825 001 2�617 825 002 2�617 825 003 2�617 825 005 2�617 825 006 2�617 825 007 2�619 528 001 2�619 528 003 2�619 528 528 2�620 866 001 2�

8810 105 110 28810 105 113 28810 105 210 28810 105 212 28810 105 213 28

no. Page

810 105 222 28810 105 310 28810 105 319 28810 105 323 28810 105 329 28810 105 352 28810 105 391 28819 001 024 �1819 002 002 �1819 003 001 �1827 017 002 20827 020 001 ��827 092 002 �1827 094 001 �1827 104 005 ��, ��827 104 205 ��827 106 001 ��827 106 002 ��827 106 011 ��827 106 012 ��827 106 401 ��827 106 402 ��827 106 411 ��827 106 412 ��827 106 601 ��827 106 602 ��827 106 611 ��827 106 612 ��827 107 064 31827 107 107 31827 107 168 31827 109 107 ��827 110 001 ��827 110 008 ��827 110 009 ��827 110 010 ��827 110 011 ��827 110 012 ��827 110 210 ��827 110 211 ��827 110 212 ��827 113 001 �8827 113 003 �8827 113 011 �8827 115 004 29827 117 064 31827 117 107 31827 117 168 31827 119 107 ��827 124716 3�, �0, �1, �3827 124 727 3�, �0, �1, �3827 124 827 �0827 125 001 28827 125 002 28827 125 003 28827 128 710 3�, �3827 128 730 3�, �3827 130 001 23827 131 001 23

no. Page

827 132 001 23827 133 001 23827 134 001 2�827 134 002 2�827 134 003 2�827 134 004 2�827 137 001 �9827 138 002 ��827 146 336 3�, �0, �1, �3827 146 337 3�, �0, �1, �3827 146 836 3�, �0, �1, �3827 146 837 3�, �0, �1, �3827 147 001 ��827 147 002 ��827 148 001 �9827 150 002 23827 150 003 23, �2827 150 004 23827 150 005 23827 150 203 23827 150 304 23827 153 001 22827 154 001 ��827 154 002 ��827 158 001 29827 159 001 29827 160 001 �0827 160 003 �0827 161 005 ��827 165 001 20, 21827 166 001 20, 21827 167 001 20827 173 002 �0827 174 001 23827 174 002 23827 174 003 23827 174 004 23827 176 001 30827 177 001 �9827 180 001 30827 181 010 2�827 181 011 2�827 181 012 2�827 181 013 2�827 186 210 2�827 186 211 2�827 186 212 2�827 186 213 2�827 189 008 �2827 190 015 3�, �1, �3827 190 016 3�, �1827 190 017 31827 212 001 ��827 212 002 ��827 213 011 ��827 213 013 ��827 216 004 �8827 217 002 �2827 219 002 �3

index

no. Page

827 221 001 ��827 221 002 ��827 222 001 ��827 222 002 ��827 228 001 ��827 229 001 21827 513 075 �1827 513 090 �1827 513 125 �1827 513 150 �1827 513 175 �1827 513 190 �1827 513 215 �1827 513 240 �1827 513 300 �1827 513 360 �1827 523 075 �1827 523 090 �1827 523 125 �1827 523 150 �1827 523 175 �1827 523 190 �1827 523 215 �1827 523 240 �1827 523 300 �1827 523 360 �1827 527 450 �1827 527 510 �1827 527 525 �1827 537 075 �1827 537 090 �1827 537 125 �1827 537 150 �1827 537 175 �1827 537 190 �1827 537 215 �1827 537 240 �1827 537 300 �1827 537 360 �1827 539 450 �1827 539 510 �1827 539 525 �1827 660 001 3�, 3�, �1, �3827 660 003 3�, 3�, �1, �3827 660 004 3�, 3�, �1, �3827 660 006 3�, 3�, �1, �3827 661 001 3�, 3�, �1, �3827 661 002 3�, 3�, �1, �3827 661 004 3�, 3�, �1, �3827 668 001 �9827 670 002 ��827 670 003 ��827 671 001 ��827 678 001 3�, �1, �2, �3827 678 002 3�, �1, �2, �3839 001 024 �1839 002 002 �1839 003 001 �1839 004 002 �2

no. Page

839 004 003 �2839 005 001 �2850 110 035 13850 110 050 13850 110 070 13850 110 095 13850 110 120 13850 110 150 13850 110 185 13850 110 240 13850 120 035 13850 120 050 13850 120 070 13850 120 095 13850 120 120 13850 120 150 13850 120 185 13850 120 240 13850 130 050 13850 130 070 13850 130 095 13850 130 120 13850 210 050 1�850 210 070 1�850 210 095 1�850 210 120 1�850 210 150 1�850 210 185 1�850 210 240 1�850 210 300 1�850 220 050 1�850 220 070 1�850 220 095 1�850 220 120 1�850 220 150 1�850 220 185 1�850 220 240 1�850 220 300 1�850 230 035 1�850 230 050 1�850 230 070 1�850 230 095 1�850 230 120 1�850 230 150 1�850 230 185 1�850 230 240 1�850 310 120 1�850 310 150 1�850 310 185 1�850 310 240 1�850 310 300 1�850 310 400 1�850 310 500 1�850 310 630 1�850 320 050 1�850 320 070 1�850 320 095 1�850 320 120 1�850 320 150 1�

no. Page

850 320 185 1�850 320 240 1�850 320 300 1�850 320 400 1�850 320 500 1�850 320 630 1�850 330 050 1�850 330 070 1�850 330 095 1�850 330 120 1�850 330 150 1�850 330 185 1�850 330 240 1�850 330 300 1�850 330 400 1�850 330 500 1�850 350 120 1�850 350 150 1�850 350 240 1�850 350 300 1�850 350 400 1�850 350 500 1�870 010 025 12870 010 035 12870 010 05 12870 010 070 12870 020 025 12870 020 035 12870 020 050 12870 020 070 12870 110 035 13870 110 050 13870 110 070 13870 110 095 13870 110 120 13870 110 150 13870 110 185 13870 110 240 13870 120 035 13870 120 050 13870 120 070 13870 120 095 13870 120 120 13870 120 150 13870 120 185 13870 120 240 13870 130 050 13870 130 070 13870 130 095 13870 130 120 13870 130 150 13870 130 185 13870 210 050 1�870 210 070 1�870 210 095 14870 210 120 1�870 210 150 1�870 210 185 1�870 210 240 1�

no. Page

870 210 300 1�870 220 050 1�870 220 070 1�870 220 095 1�870 220 120 1�870 220 150 1�870 220 185 1�870 220 240 1�870 220 300 1�870 230 035 1�870 230 050 1�870 230 070 1�870 230 095 1�870 230 120 1�870 230 150 1�870 230 185 1�870 230 240 1�870 230 300 1�870 310 120 1�870 310 150 1�870 310 185 1�870 310 240 1�870 310 300 1�870 310 400 1�870 310 500 1�870 310 630 1�870 320 050 1�870 320 070 1�870 320 095 1�870 320 120 1�870 320 150 1�870 320 185 1�870 320 240 1�870 320 300 1�870 320 400 1�870 320 500 1�870 320 630 1�870 330 050 1�870 330 070 1�870 330 095 1�870 330 120 1�870 330 150 1�870 330 185 1�870 330 240 1�870 330 300 1�870 330 400 1�870 330 500 1�870 330 630 1�870 350 630 1�

9970 318 003 �2993 008 002 �8

index

michael ryan

MR STAMP 2

Documents

MV Catalogue Cable Systems_33kV,_1250A_50...MV-ConnEX Multi-Contact Elbow Bushing up to 52 kV MV-ConnEX Surge Arrester up to 52 kV MV-ConnEX Busbar Connectors up to 42 kV Voltage detecting