Upload
eng-mahamed
View
708
Download
23
Tags:
Embed Size (px)
Citation preview
HUAWEI TECHNOLOGIES CO., LTD.
Copper Connectivity
Products Quick Reference
PART A :MDF Products
PART B :DDF Products
MDF (Main Distribution Frame) Product Series
Huawei’s MDF products meet EU RoHS environmental regulations. There is a complete series of products to
satisfy different customers’ requirements:
Narrowband products
JPX202 Product series ............................................................................................. A-3
JPX256 Product series ........................................................................................... A-20
JPX658 Product series ........................................................................................... A-27
JPX01 Product series ( Narrowband ) ..................................................................... A-32
JPX03 Product series ............................................................................................. A-37
JPX04 Product series ............................................................................................. A-43
JPX-MT Product series ........................................................................................... A-47
Broadband products
JPX321 Product series ........................................................................................... A-50
JPX02 Product series ............................................................................................. A-54
JPX01 Product series (Broadband) ......................................................................... A-59
FT Product series ................................................................................................... A-69
Integrated Products
JPX Integrated Products ........................................................................................ A-76
A-�
MDF Product Series MDF Product Series
Environmental Requirement
Temperature range: 0°C~ 40°C;
Relative humidity <85% (at +30°C);
Atmospheric pressure: 70 kPa~106 kPa;
Technical Indexes
Term
inal
blo
ck in
dex
es
Item Specifications
Dielectric strength
It can stand a test of an approx. sine-wave with 1000Vrms (45Hz~60 Hz )for 1 minute between any two disconnected connection terminals, or between any connection termianl and metal fixed part, after the test under normal atmospheric conditions, and after low temperature test, high temperature test, temperature variation test, and wet heating test, there is no breakdown and arc
Insulation resistance
Under normal atmospheric conditions, and after low temperature test, high temperature test, temperature variation test, and wet heating test, the insulation resistance between any two disconnected connection terminals, or between any connection termianl and metal fixed part≥1000MΩ
Terminal contact resistance
Under normal atmospheric conditions≤3mΩ
After low temperature test, high temperature test, temperature variation test, wet heating test and vabration test, the increment of contact resistance≤2mΩAfter repeat connection test, the increment of contact resistance≤2mΩ
Fire resistance of Plastic Parts
Compliant with UL94 V-0 level
Tensional Force
IDC(Insulation Displacement Connection) type:≥25N;
Wire-wrap connection type:
Pro
tect
ive
unit
ind
exes
Insulation resistance Under normal atmospheric conditions≥1000MΩ
Contact resistance
Under normal atmospheric conditions, the contact resistance between two conjointed connection terminals≤7mΩAfter low temperature test, high temperature test, temperature variation test, wet heating test and vabration test, the increment of contact resistance≤3mΩAfter repeat connection test, the increment of contact resistance≤3mΩ
Non-action current No operation occurs when I=90mA remaining for 60min (t=40°C)Overcurrents recovery time
≤60s
Overvoltages recovery time
≤150ms (gas discharge tube protective unit)≤30ms (semi-conduct arrester protective unit)
Fire resistance of Plastic Parts and PCB
Compliant with UL94 V-0 level
For detailed specifications of overcurrents or overvoltages, refer to that of specified model of protective units;
Diameter of wire coremm
Min.Tensional ForceN
Diameter of wire coremm
Min.Tensional ForceN
0.32 20 0.5 280.4 22 0.6 35
Reference Standard
• ITU-T Rec. K.20 (07/2003) Resistibility of telecommunication
equipment installed in a telecommunication centre to
overvoltages and overcurrents
• ITU-T Rec. K.44 (07/2003) Res ist ib i l i ty test for
telecommunication equipment exposed to overvoltages
and overcurrents - Basic Recommendation
• ITU-T Rec. K12_2000 Characteristics of gas discharge tubes
for the protection of telecommunications installations
A-�
MDF Product Series MDF Product Series
JPX202 Product Series
JPX202 MDF Series
JPX202-F Double-sided MDF Series .......................................................................................................... A-4
JPX202-SF Single-sided MDF Series .......................................................................................................... A-6
JPX202-GQ Wall-Mounted MDF ............................................................................................................... A-8
JPX202-A3 Wall-mounted Distribution Cabinet ........................................................................................ A-9
JPX202-B/C MDF (Cabinet) Series ............................................................................................................A-10
Terminal Block
JPX202-FA8-72 Cable Side Terminal Block ...............................................................................................A-11
JPX202-STO-83 Exchange Side Terminal Block .........................................................................................A-12
JPX202 Alarm
JPX-LGJ-JY Column Alarm for MDF ..........................................................................................................A-13
JPX-ZGJ-JY Main Alarm for MDF ..............................................................................................................A-13
JPX-GJ-GY Alarm for Cabinet ..................................................................................................................A-14
Protective Unit
JPX202-FA9-81J Gas Discharge Tube Protective Unit ...............................................................................A-15
JPX202-FA9-81B Gas Discharge Tube Protective Unit ..............................................................................A-15
JPX202-FA9-83A Semi-conductor Arrester Protective Unit .......................................................................A-16
JPX202-FA9-81F Integrated Circuit Protective Unit ..................................................................................A-16
Base Series
DZ-F Base Series ......................................................................................................................................A-17
DZ-SF Base Series ....................................................................................................................................A-17
DZ-B/C Base Series ..................................................................................................................................A-18
JPX202 Accessories .................................................................................................................................A-19
Contents
A-�
JPX202 Product SeriesMDF Product Series
JPX202-F Double-sided MDF Series
Application and featuresApplicable to large capacity station;
Consist of horizontal row and
vertical column back-to-back. In
the horizontal row, exchange lines
are connected to JPX202-STO-83B
exchange side terminal blocks; in the
vertical column, external lines are
connected to JPX202 -FA8-72 cable
side terminal blocks;
The frames are made of sheet-metal;
ModelDimensions ( not including guardrail / terminal block)
H×W×D mm
External line capacitypair/column ×column
Qty.
Internal line capacity
pair/row ×row Qty.
PackageH×W×D mm
JPX202-FC-5 column double-sided MDF
JPX202-F1C 3000×1250×800 1200×5 640×9 3160×530×290
JPX202-F2C 2600×1250×800 1000×5 640×8 2760×530×290
JPX202-F3C 2200×1250×800 800×5 640×6 2360×530×290
JPX202-F4C 1800×1250×800 600×5 640×5 1960×530×290
JPX202-FB-4 column double-sided MDF
JPX202-F1B 3000×1000×800 1200×4 512×9 3160×530×290
JPX202-F2B 2600×1000×800 1000×4 512×8 2760×530×290
JPX202-F3B 2200×1000×800 800×4 512×6 2360×530×290
JPX202-F4B 1800×1000×800 600×4 512×5 1960×530×290
JPX202-FE-3 column double-sided MDF
JPX202-F1E 3000×750×800 1200×3 384×9 3160×530×290
JPX202-F2E 2600×750×800 1000×3 384×8 2760×530×290
JPX202-F3E 2200×750×800 800×3 384×6 2360×530×290
JPX202-F4E 1800×750×800 600×3 384×5 1960×530×290
JPX202-FD-2 column double-sided MDF
JPX202-F1D 3000×500×800 1200×2 256×9 3160×530×290
JPX202-F2D 2600×500×800 1000×2 256×8 2760×530×290
JPX202-F3D 2200×500×800 800×2 256×6 2360×530×290
JPX202-F4D 1800×500×800 600×2 256×5 1960×530×290
A-�
JPX202 Product SeriesMDF Product Series
JPX202-FC-5 column double-sided MDF series JPX202-FB-4 column double-sided MDF series
JPX202-FE-3 column double-sided MDF series JPX202-FD-2 column double-sided MDF series
A-�
JPX202 Product SeriesMDF Product Series
JPX202-SF Single-sided MDF Series
Application and featuresApplicable to small capacity station;
Installed against wall;
Full front access;
In the frame, JPX202-FA8-72 cable side terminal
blocks and JPX202-STO-83A exchange side terminal
blocks are installed on vertical columns one another.
Model
Dimensions ( not including guardrail
/terminal block)H×W×D mm
External line capacitypair/column ×column
Qty.
Internal line capacitypair/row ×row Qty.
PackageH×W×D mm
JPX202-SFB- 4 column single-sided MDF series
JPX202-SF1B 3000×1000×600 1200×2 1152×2 3160×530×290
JPX202-SF2B 2600×1000×600 1000×2 1024×2 2760×530×290
JPX202-SF3B 2200×1000×600 800×2 768×2 2360×530×290
JPX202-SF4B 1800×1000×600 600×2 640×2 1960×530×290
JPX202-SFD- 2 column single-sided MDF series
JPX202-SF1D 3000×500×600 1200×1 1152×1 3160×530×290
JPX202-SF2D 2600×500×600 1000×1 1024×1 2760×530×290
JPX202-SF3D 2200×500×600 800×1 768×1 2360×530×290
JPX202-SF4D 1800×500×600 600×1 640×1 1960×530×290
A-�
JPX202 Product SeriesMDF Product Series
JPX202-SFB- 4 column single-sided MDF series
JPX202-SFD- 2 column single-sided MDF series
A-�
JPX202 Product SeriesMDF Product Series
JPX202-GQ Wall-Mounted MDF
Application and featuresApplicable to small capacity station;
Small size;
Exchange lines are connected to JPX202-STO-83B
exchange side terminal blocks; external lines are
connected to JPX202 -FA8-72 cable side terminal
blocks.
ModelDimensions ( not including guardrail / terminal block)
H×W×D mm
External line capacity
Internal line capacity
PackageH×W×D mm
JPX202-GQ100 700×250×140 100 128 750×290×170
JPX202-GQ200 750×500×140 200 256 780×540×170
JPX202-GQ400 1250×500×140 400 384 1310×540×170
A-�
JPX202 Product SeriesMDF Product Series
JPX202-A3 Wall-mounted Distribution Cabinet
Application and featuresApplicable to small capacity station;
Small size;
Upper /lower cable entry;
Both internal lines jumpers and external lines
jumpers are terminated on a same side;
Exchange lines are connected to JPX202-STO-83B
exchange side terminal blocks; external lines are
connected to JPX202 -FA8-72 cable side terminal
blocks.
ModelDimensions H×W×D mm
External line capacity
Internal line capacity
PackageH×W×D mm
JPX202-A3 800×660×220 400 256 715×858×275
A-�
JPX202 Product SeriesMDF Product Series
JPX202-B/C MDF (Cabinet) Series
Application and featuresApplicable to small capacity station;
Composed of back-to-back vertical columns;
Exchange lines are connected to JPX202-STO-83B exchange side
terminal blocks; external lines are connected to JPX202 -FA8-72
cable side terminal blocks;
Quick-disassembly cabinet door.
ModelDimensions H×W×D mm
External line capacity
Internal line capacity
PackageH×W×D mm
JPX202-B1 2200×800×600 1800 1536 2344×944×830
JPX202-B2 2000×800×600 1600 1280 2144×944×830
JPX202-B3 1800×800×600 1400 1280 1944×944×830
JPX202-C1 2200×600×600 1800 1536 2344×744×830
JPX202-C2 2000×600×600 1600 1280 2144×744×830
JPX202-C3 1800×600×600 1400 1280 1944×744×830
A-�0
JPX202 Product SeriesMDF Product Series
JPX202-FA8-72 Cable Side Terminal Block
ModelDimensionsH×W×D mm
Package (mm3)
FA8-72 220×146×120 530×380×400/(8pcs)
Application and featuresCapacity: 100 pair / terminal block;
IDC (Insulation Displacement Connection)
connection mode: two wires can be terminated
on each IDC connect-element;
Contacts of connect-element are normally-open,
and completed circuit will be formed if protective
unit is inserted;
Maintenance on one loop do not affect any other
loop;
Applicable wire:
• The diameter of conductor is 0.32mm~0.6mm;
• The maximum outer diameter (including the
insulation coat) is no more than 1.4mm.
A-��
JPX202 Product SeriesMDF Product Series
JPX202-STO-83 Exchange Side Terminal Block
ModelDimensionsH×W×D mm
Package (mm3)
STO-83A
(vertical installation)248×130×76 566×338×292/(8pcs)
STO-83B
(horizontal installation)130×248×76 566×338×292/(8pcs)
Application and featuresCapacity: 128 pair / block;
IDC (Insulation Displacement Connection)
connection mode: two wires can be terminated
on each IDC connect-element;
Contacts of connect-element are normal-closed,
and circuit will be open if disconnection-plug
(open-circuit plug) is inserted;
Applicable wire:
• The diameter of conductor is 0.32mm~0.6mm;
• The maximum outer diameter (including the
insulation coat) is no more than 1.4mm.
A-��
JPX202 Product SeriesMDF Product Series
JPX-LGJ-JY Column Alarm for MDF
Model Package (mm3)
JPX-LGJ-JY 132×60×54
JPX-ZGJ-JY Main Alarm for MDF
Model Package (mm3)
JPX-ZGJ-JY 225×110×72
Application and featuresApplicable to double-sided MDF and single-sided MDF;
Output visual alarm to identify the column where the
alarm signal is located;
Used together with main alarm for MDF.
Application and featuresApplicable to double-sided MDF and single-sided MDF;
Output visual & audio alarm;
Provide remote alarm monitoring interface;
Used together with column alarm for MDF.
A-��
JPX202 Product SeriesMDF Product Series
JPX-GJ-GY Alarm for Cabinet
Model Packag (mm3)
JPX-GJ-GY 175×130×90
Application and featuresApplicable to main distribution cabinet, wall-
mounted frame and wall-mounted cabinet;
It can provide alarm for two columns;
Output visual & audio alarm;
Provide remote alarm monitoring interface.
A-��
JPX202 Product SeriesMDF Product Series
JPX202-FA9-81J Gas Discharge Tube Protective Unit
Model Package (mm3)
JPX202-FA9-81J 490×310×155/(600pcs)
JPX202-FA9-81B Gas Discharge Tube Protective Unit
Model Package (mm3)
JPX202-FA9-83A 490×310×155/(600pcs)
Application and featuresUsed to provide primary protection for equipment of
exchange station and access network;
Used with JPX202-FA8-72 cable side terminal block;
Adopting Ф8×6 gas discharge tube as protection component
against over-voltages:
• DC breakdown voltage: 380 - 550V
• Impulse breakdown voltage: <800V(1kV/μs)
Adopting PTCR (Positive Temperature Coefficient Resistor)
against over-currents;
When I=1A, action time<1.2S;
Compliant with: ITU-K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents.
Application and featuresApplicable to the primary protection for equipment of
exchange station and access network;
Used with JPX202-FA8-72 cable side terminal block;
Integrated overvoltages protection with overcurrents
protection;
Alarm signal output and open-circuit upon heavy current;
Adopting gas discharge tube as protection component
against over-voltages:
• DC breakdown voltage: 190 - 260V
• Impulse breakdown voltage: <800V(1kV/μs)
Adopting PTCR( Positive Temperature Coefficient Resistor )
against over-currents;
When I=1A, action time<0.4S;
Compliant with: ITU-K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents.
A-��
JPX202 Product SeriesMDF Product Series
JPX202-FA9-83A Semi-conductor Arrester Protective Unit
Application and featuresUsed to provide primary protection for equipment of
exchange station and access network;
Used with JPX202-FA8-72 cable side terminal block;
Output alarm signal when contact with power-lines occurs;
Such functionality as alarm signal output and open-circuit
upon heavy current are available;
Adopting semi-conductor arrester as protection component
against over-voltages:
• DC breakdown voltage: 190 - 260V
• Impulse breakdown voltage: <400V(1kV/μs)
Adopting PTCR( Positive Temperature Coefficient Resistor )
against over-currents;
When I=1A, action time<0.4S;
Compliant with: ITU-K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents.
Model Package (mm3)
JPX202-FA9-83A 490×310×155/(600pcs)
JPX202-FA9-81F Integrated Circuit Protective Unit
Application and featuresUsed to provide primary protection for equipment of
exchange station and access network;
Used with JPX202-FA8-72 cable side terminal block;
Adopting integrated circuit as protection components
against overvoltage and overcurrents:
• DC breakdown voltage: 190 - 260V
• Impulse breakdown voltage: <400V(1kV/μs)
Responding time: <10mS;
Pure electronics circuit for alarm processing;
Line resistance: <4Ω;
Output alarm signal promptly upon over-voltage or over-
current occurs, and alarm signals remains until manual
process;
Alarm signals is cleared upon power off.
Model Package (mm3)
JPX202-FA9-83F 490×310×155/(600pcs)
A-��
JPX202 Product SeriesMDF Product Series
DZ-F Base Series
Application and featuresFour types of bases namely DZ-FC, FB, FE and FD, which
are applicable to JPX202-FC, FB, FE and FD series MDF
respectively;
8 steps of adjustable height: 250, 280, 300, 330, 350,
380, 400, 420mm.
ModelDimensionsH×W×D mm
Package (mm3)
DZ-FC 250×1250×790 1230×330×180
DZ-FB 250×1000×790 1020×330×180
DZ-FE 250×750×790 770×330×180
DZ-FD 250×500×790 650×330×180
DZ-SF Base Series
Application and featuresTwo types of bases namely DZ-SFB and DZ-SFD, which are
applicable to JPX202-SFB and SFD series MDF respectively;
8 steps of adjustable height: 250, 280, 300, 330, 350,
380, 400, 420mm.
ModelDimensionsH×W×D mm
Package (mm3)
DZ-SFB 250×1000×590 1020×330×180
DZ-SFD 250×500×590 520×330×180
A-��
JPX202 Product SeriesMDF Product Series
DZ-B/C Base Series
Application and featuresTwo types of bases namely DZ-B and DZ C, which
are applicable to JPX202-B and JPX202-C series MDF
respectively;
8 steps of adjustable height: 250, 280, 300, 330, 350, 380,
400, 420mm.
ModelDimensionsH×W×D mm
Package (mm3)
DZ-B 250×796×580 820×620×270
DZ-C 250×596×580 620×620×270
A-��
JPX202 Product SeriesMDF Product Series
Accessories Appearance Features and functions
JPX202-CSS- Testing Plug• Applicable to exchange side terminal blocks;• Carrying on test on cable side terminal blocks without
pulling out protective unit.
JPX202-KLS- Disconnection-plug
• Used to disconnect a loop on exchange side terminal blocks;
• Disconnecting a loop on cable side terminal block without removing protective unit.
JPX-DXD1
• IDC (Insulation Displacement Connection) tool with wire-cutter;
• Used to insert wires into connect-slot of terminal blocks or remove wires from terminal blocks;
• Redundant ends of wires can be cut automatically after wires are terminated;
• Hooks for removing wires are equipped.
JPX202 Accessories
A-��
JPX202 Product SeriesMDF Product Series
JPX256 Product Series
Cable Side Terminal Block
JPX256-FA8-123 10-pair Cable Side Terminal Block ................................................................................ A-21
JPX256-ZJ Mounting-backplate for Cable Side Terminal Block ................................................................ A-21
Exchange Side Terminal Block
JPX256-STO-128-8-pair Exchange side Terminal Block ............................................................................ A-22
JPX256-ZJ Mounting-backplate for Exchange Side Terminal Block .......................................................... A-22
Protective Unit
JPX256-FA9-172 Semi-conductor Arrestor Protective Unit ...................................................................... A-23
JPX256-FA9-173 Gas Discharge Tube Protective Unit ............................................................................. A-23
JPX256-FA9-173J Gas Discharge Tube Protective Unit ............................................................................ A-24
JPX256-FA9-150Q Semi-conductor Arrestor Protective Unit ................................................................... A-24
JPX256-FA9-230Q Gas Discharge Tube Protective Unit ........................................................................... A-25
JPX256-FA9-400Q Gas Discharge Tube Protective Unit ........................................................................... A-25
JPX256 Accessories ................................................................................................................................ A-26
Contents
A-�0
JPX256 Product SeriesMDF Product Series
JPX256-FA8-123 10-pair Cable Side Terminal Block
Application and featuresCapacity: 10 pair / piece
Connect-element are normal-open, and completed
circuit will be formed after protective unit is inserted;
Applicable wire:
• The diameter of conductor is 0.32mm - 0.6mm;
• The maximum outer diameter (including the
insulation coat) is no more than 1.4mm;
Provide protection through the inserted protective unit.
JPX256-ZJ Mounting-backplate for Cable Side Terminal Block
ModelDimensions
H×W×D mm
Installation hole space
mmPackage (mm3)
JPX256-ZJ50 81×112×82.5Single
installation hole
420×330×265/(54pcs)
JPX256-ZJ100 162×112×82.5 80.5 450×440×335/(48pcs)
ModelDimensionsH×W×D mm
Package (mm3)
JPX256-FA8-123 14.7×130×50 300×136×53/(20pcs)
Application and featuresJPX256-ZJ50 mounting –backplate applicable to
assembly JPX256-FA8-123 10-pair cable side terminal
block, 5 installation positions/PCS;
JPX256-ZJ100 mounting –backplate applicable to
assembly JPX256-FA8-123 10-pair cable side terminal
block, 10 installation positions/PCS.
A-��
JPX256 Product SeriesMDF Product Series
JPX256-STO-128-8-pair Exchange Side Terminal Block
ModelDimensionsH×W×D mm
Package (mm3)
JPX256-STO-128 14×105×38.5 295×110×41/(20pcs)
JPX256-ZJ Mounting-backplate for Exchange Side Terminal Block
ModelDimensions H×W×D mm
Space between Installation hole
mmPackage (mm3)
JPX256-ZJ64 115×86×87.5Single installation
hole430×380×240/(48pcs)
JPX256-ZJ128 230×86×87.5 115 430×380×235/(24pcs)
Application and featuresUnit capacity: 8 pair/ piece;
Applicable wire:
• The diameter of conductor is 0.32mm - 0.6mm;
• The maximum outer diameter (including the
insulation coat) is no more than 1.4mm;
Connect-element are normal-closed, and circuit will
be open if disconnection-plug (open-circuit plug) is
inserted.
Application and featuresJPX256-ZJ64 mounting –backplate applicable to
assembly JPX256-STO-128 8-pair exchange side
terminal block, 8 installation positions/PCS;
JPX256-ZJ128 mounting –backplate applicable to
assembly JPX256-STO-128 8-pair exchange side
terminal block, 16 installation positions/PCS.
A-��
JPX256 Product SeriesMDF Product Series
JPX256-FA9-172 Semi-conductor Arrestor Protective Unit
Application and featuresApplicable to the primary protection for equipment of exchange
station and access network;
Used with JPX256-FA8-123 cable side terminal block;
Integrated overvoltages protection with overcurrents
protection;
Adopting semi-conductor arrestor protection component
against over-voltages;
• DC breakdown voltage: 190 - 260V
• Impulse breakdown voltage: <400V(1kV/μs)
Adopting PTCR (Positive Temperature Coefficient Resistor))
against over-currents;
When I=1A, action time<0.4S;
Compliant with ITU-K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents.
Model Package (mm3)
JPX256-FA9-172 490×310×155/(900pcs)
JPX256-FA9-173 Gas Discharge Tube Protective Unit
Application and featuresApplicable to the primary protection for equipment of exchange
station and access network;
Used with JPX256-FA8-123 cable side terminal block;
Integrated overvoltages protection with overcurrents
protection;
Adopting gas discharge tube as protection component against
over-voltages;
• DC breakdown voltage: 190 - 260V
• Impulse breakdown voltage: <800V(1kV/μs)
Adopting PTCR(Positive Temperature Coefficient Resistor)
against over-currents;
When I=1A, action time<0.4S;
Compliant with ITU-K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents.
Model Package (mm3)
JPX256-FA9-173 490×310×155/(900pcs)
A-��
JPX256 Product SeriesMDF Product Series
JPX256-FA9-173J Gas Discharge Tube Protective Unit
Application and featuresUsed to provide the primary protection for equipment of
exchange station and access network;
Used with JPX256-FA8-123 cable side terminal block;
Integrated overvoltages protection with overcurrents
protection;
Adopting gas discharge tube as protection component against
over-voltages;
• DC breakdown voltage: 380 - 550V
• Impulse breakdown voltage: <800V(1kV/μs)
Adopting PTCR (Positive Temperature Coefficient Resistor)
against over-currents;
When I=1A, action time<1.2S.
Model Package (mm3)
JPX256-FA9-173J 490×310×155/(900pcs)
JPX256-FA9-150Q Semi-conductor Arrestor Protective Unit
Application and featuresUsed to provide primary protection for equipment of exchange
station and access network;
Used with JPX256-FA8-123 cable side terminal block;
Provide discharge tube FS short-circuit protection function;
Integrated overvoltages protection with overcurrents protection;
Adopting 3-polar discharge tube and TVS bridge-type clamper circuit:
• DC breakdown voltage: 120 - 190V
• Impulse breakdown voltage: <275V(4kV/μs)
Adopting PTCR( Positive Temperature Coefficient Resistor )
against over-currents;
When I=250mA, action time<3S;
Compliant with ITU-T K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents;
Compliant with: Five-Electrode Protector Spec.
No.OES-002-036-01(2004);
Compliant with: Indoor Terminal (MDF) Spec.
No.OES-002-001-02(2006).
Model Package (mm3)
JPX256-FA9-150Q 490×310×155/(900pcs)
A-��
JPX256 Product SeriesMDF Product Series
JPX256-FA9-230Q Gas Discharge Tube Protective Unit
Application and featuresApplicable to the primary protection for equipment of exchange
station and access network;
Used with JPX256-FA8-123 cable side terminal block;
Provide discharge tube FS short-circuit protection function;
Integrated overvoltages protection with overcurrents protection;
Adopting 3-polar discharge tube and TVS bridge-type clamper
circuit:
• DC breakdown voltage: 180 - 300V
• Impulse breakdown voltage: <500V(4kV/μs)
Adopting PTCR(Positive Temperature Coefficient Resistor)
against over-currents;
When I=500mA, action time<3S;
Compliant with ITU-T K.20(07/2003): Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents;
Compliant with: Line Protection Device TOT-1/2003(STO)Vol.2 Part.
Model Package (mm3)
JPX256-FA9-230Q 490×310×155/(900pcs)
JPX256-FA9-400Q Gas Discharge Tube Protective Unit
Application and featuresApplicable to the primary protection for equipment of exchange
station and access network;
Used with JPX256-FA8-123 cable side terminal block;
3-electrode arrester with fail safe;
• GDT DC breakdown voltage: 300-500V;
• Impulse breakdown voltage: 340V (4kV 10/700μS);
Positive temperature coefficient thermister;
Hybrid clamping circuit;
Compliant with: OES-002-036-02_2006 Five-Electrode Protector
For MDF Terminating Block.
Model Package (mm3)
JPX256-FA9-400Q 490×310×155/(900pcs)
A-��
JPX256 Product SeriesMDF Product Series
JPX256 Accessories
Accessories Appearance Features and functions
JPX256-CSS-Testing Plug
• Applicable to loop test on JPX256-STO-128 8 –pair exchange side terminal block.
JPX256-KLS- Disconnection Plug (Open-circuit Plug)
• A plastic insulation piece used with JPX256 series module;• Insert JPX256-KLS into exchange side terminal block to
open connection if required.
JPX-DXD1
• IDC (Insulation Displacement Connection) tool with wire-cutter;
• Used to insert wires into connect-slot of terminal blocks or remove wires from terminal blocks;
• Redundant ends of wires can be cut automatically after wires are terminated;
• Hooks for removing wires are equipped
A-��
JPX256 Product SeriesMDF Product Series JPX658 Product SeriesMDF Product Series
JPX658 Product Series
JPX658-FA8-239X 10-pair Cable Side Terminal Block .............................................................................. A-28
JPX658-FA8-239XV(H) 8-pair Cable Side Terminal Block ......................................................................... A-28
JPX658-STO-236XD Series 16-pair Exchange Side Terminal Block ........................................................... A-29
JPX658-FA9-280 Gas Discharge Tube Protective Unit ............................................................................. A-29
JPX658-FA9-280J Gas Discharge Tube Protective Unit ............................................................................ A-30
JPX658 Accessories ................................................................................................................................ A-31
Contents
A-��
JPX658 Product SeriesMDF Product Series
ModelDimensions
H×W×D mmPackage (mm3) Note
JPX658-FA8-239XV 15×150×59.8 155×155×60/(10pcs)Colour: white
JPX658-FA8-239XVH 15×150×59.8 155×155×60/(10pcs)Colour: yellow
JPX658-FA8-239X 10-pair Cable Side Terminal Block
Application and featuresApplicable to external cables connection and jumping
of JPX658 MDF;
Clamp-mounted on installation strip;
Provide functionality of protection against overvoltages
and overcurrents by inserting protective unit and give
alarm signals.
ModelDimensions
H×W×D mmPackage (mm3) Note
JPX658-FA8-239X 15×150×59.8 155×155×60/(10pcs)
JPX658-FA8-239XB 15×150×59.8 155×155×60/(10pcs)Colour: white
JPX658-FA8-239XH 15×150×59.8 155×155×60/(10pcs)Colour: yellow
Remark: for JPX658-FA8-239X, the package including 9 pcs JPX658-FA8-239XB, one JPX658-FA8-239XH and two sets of JPX658-WBS2.
JPX658-FA8-239XV(H) 8-pair Cable Side Terminal Block
Application and featuresApplicable to connection of external cables between
internal lines in MDF;
Clamp-mounted on installation strip;
Provide functionality of protection against overvoltages
and overcurrents by inserting protective unit and give
alarm signals;
Meet transmission requirements about VDSL2;
Compliant with ITU-T G.993.2 (02/2006) Very high
speed digital subscriber line transceivers 2 (VDSL2).
A-��
JPX658 Product SeriesMDF Product Series JPX658 Product SeriesMDF Product Series JPX658 Product SeriesMDF Product Series
JPX658-STO-236XD Series 16-pair Exchange Side Terminal Block
Application and featuresClamp-mounted on installation strip;
Applicable to cable termination and jumper-connection;
Testing and loop disconnection of lines can be
implemented on it.
JPX658-FA9-280 Gas Discharge Tube Protective Unit
ModelDimensions
H×W×D mmPackage (mm3) Note
JPX658-STO-236XD 12×150×59.8 155×155×60/(20pcs)Colour: white
JPX658-STO-236XDH 12×150×59.8 155×155×60/(20pcs)Colour: yellow
JPX658-STO-236XD-xDSL
12×150×59.8 155×155×60/(20pcs)Colour:
blue
Application and featuresUsed to provide primary protection for exchange
equipments and access equipment;
Used with JPX658-FA8-239X series 10-pair cable side
terminal block;
Adopting PTCR to Provide protection function against
overcurrents;
When I=1A, action time<1.2S;
Adopting gas discharge tube GDT to provide protection
against overvoltages:
• DC breakdown vloltage:380 - 550V
• Impulse limiting voltage:<800V(1kV/μs)
Compliant with ITU-T K.20(07/2003) Resistibility
of telecommunication equipment installed in a
telecommunications centre to overvoltages and overcurrents.
ModelDimensions
H×W×D mmPackage (mm3)
JPX658-FA9-280 6.9×11×45 390×290×305/(2400pcs)
JPX658 Product SeriesMDF Product Series
A-��
JPX658 Product SeriesMDF Product Series
JPX658-FA9-280J Gas Discharge Tube Protective Unit
Application and featuresUsed to provide primary protection for exchange
equipments and access equipment;
Used with JPX658-FA8-239X series 10 pair cable side
terminal unit;
Adopting gas discharge tube GDT (no breakdown by
mains) providing protection against overvoltages:
• DC breakdown vloltage:380 - 550V
• Impulse limiting voltage:<800V(1kV/μs)
Compliant with ITU-T K.20(07/2003) Resistibility
of telecommunication equipment installed in a
telecommunications centre to overvoltages and
overcurrents.
ModelDimensions
H×W×D mmPackage (mm3)
JPX658-FA9-280J 6.9×11×45 390×290×305/(2400pcs)
A-�0
JPX658 Product SeriesMDF Product Series JPX658 Product SeriesMDF Product Series JPX658 Product SeriesMDF Product Series
JPX658 Accessories
Accessory Appearance Features and Functions
JPX-DXD1-IDC tool
• IDC (Insulation Displacement Connection) tool with wire-cutter;
• Used to insert wires into connect-slot of terminal blocks or remove wires from terminal blocks;
• Redundant ends of wires can be cut automatically after wires are terminated;
• Hooks for removing wires are equipped.
JPX658-KLS disconnection plug
• H×W×D=2.5×6.2×33mm;• Used in JPX658-FA8-236XD series exchange side
terminal block; • Used to open the connection of in JPX658-FA8-236XD;• Insulation unit made of plastic.
JPX658-CSS testing plug (for open circuit test)
• Used in JPX658-FA8-236XD series exchange side terminal block;
• Used in test of internal lines.
JPX658-WZCSS external line testing plug (on-line test)
• Applicable to JPX658-FA8-239X series 10-pair cable side terminal block;
• Used in on-line test.
JPX658-NZCSS internal line testing plug (on-line test)
• Applicable to JPX658-STO-236XD series 16-pair exchange side terminal block;
• Used in on-line test.
JPX658-NBS1 Number-Flags of Exchange Side Terminal Block
• Applicable to JPX658-FA8-236XD series 16-pair exchange side terminal block;
• Used to identify 128 pairs of internal lines;• Including 16 pcs number-flags with different silk-screen
numbers;• Number range: “00-127”.
JPX658-NBS2 Number-Flags of Exchange Side Terminal Block
• Applicable to JPX658-FA8-236XD series 16-pair exchange side terminal block;
• Used to identify 8 pcs of Exchange side terminal block;• Including 8 pcs number-flags with different silk-screen
numbers;• Number range: “00-07”
JPX658-WBS1 Number-Flags for Cable Side Terminal Block
• Applicable to JPX658-FA8-239X series 10-pair cable side terminal block;
• Used to identify 100 pairs of lines ;• Including 20 pcs number-flags with different silk-screen
numbers;• Number range: “00-100”.
JPX658-WBS2 Number-Flags for Cable Side Terminal Block
• Applicable to JPX658-FA8-239X series 10-pair cable side terminal block;
• Used to identify 10 pcs of cable side terminal block;• Including 10 pcs number-flags with different silk-screen
numbers;• Number range: “00-09”.
JPX658 Product SeriesMDF Product Series
A-��
JPX658 Product SeriesMDF Product Series
JPX01 Product Series (Narrowband)
JPX01 Series Brackets............................................................................................................................. A-33
JPX01 Terminal Block Series ................................................................................................................... A-34
JPX01 Protective Module ....................................................................................................................... A-35
JPX01 Narrowband Product Accessories Series ....................................................................................... A-36
Contents
A-��
JPX01 Product Series ( Narrowband )MDF Product Series JPX01 Product Series ( Narrowband )MDF Product Series JPX01 Product Series ( Narrowband )MDF Product Series
JPX01 Series Brackets
Application and featuresJPX01-ZJ-100 used as mounting bracket of JPX01-FA8-
10B 10-pair terminal blocks (normally closed);
There are 10 installation positions (abbreviated as
position) for installing JPX01-FA8-10B 10-pair terminal
block;
If installed in full configuration, a 100-pair terminal block
will be formed.
JPX01-ZJ-100
Application and featuresJPX01-ZJ-80 used as mounting bracket of JPX01-STO-
8B 8-pair terminal blocks (normally closed);
There are 10 positions for installing JPX01-STO-8B 8-pair
terminal block;
If installed in full configuration, a 80-pair terminal block
will be formed.
JPX01-ZJ-80
Model Dimensions W×H×D mm
Remark
JPX01-ZJ-100 102×225×50 By default, 10 installation positions are configured, and various kinds of positions can be customized.The mounting bracket can be customized and configured flexibly.JPX01-ZJ-80 90×225×50
JPX01 Product Series ( Narrowband )MDF Product Series
A-��
JPX01 Product Series ( Narrowband )MDF Product Series
JPX01 Terminal Block Series
Application and featuresJPX01-FA8-10B 10-pair terminal block (normally closed);
10 pair / block;
IDC contact element is normally closed;
Installed on JPX01-ZJ-100 mounting bracket.
JPX01-FA8-10B
Application and featuresJPX01-FA8-10BG 10-pair terminal block (normally closed);
10 pair / block;
IDC contact element is normally closed;
Can be installed both on mounting rod (with the diameter
of Φ12mm), or on mounting bracket.
JPX01-FA8-10BG
Application and featuresJPX01-STO-8B 8-pair terminal block (normally closed);
8 pair / block;
IDC contact element is normally closed;
Installed on JPX01-ZJ-80 mounting bracket.
JPX01-STO-8B
JPX01-FA8-10B installed on
mounting bracket
JPX01-FA8-10BG installed on
mounting rod
JPX01-STO-8B installed on
mounting bracket
Model Dimensions L×H×D mm
Remark
JPX01-FA8-10B 123.3×20.5×34 JPX01-FA8-10B and JPX01-FA8-10BG are used as cable side terminal block with JPX01-FA9-230S protective module inserted in; otherwise, they are used as exchange side terminal blocks. JPX01-FA8-10BG 122.2×21.2×41.3
JPX01-STO-8B 104×20.9×34.2JPX01-STO-8B is used as an cable side terminal block with the JPX01-FA9-230SE protective module inserted in; otherwise, it is used as an exchange side terminal block.
A-��
JPX01 Product Series ( Narrowband )MDF Product Series JPX01 Product Series ( Narrowband )MDF Product Series JPX01 Product Series ( Narrowband )MDF Product Series
JPX01 Protective Module
Application and featuresWorking with JPX01-FA8-10B or JPX01-FA8-10BG10-pair
terminal block (normally closed);
Providing protection against overvoltages;
• DC breakdown voltage:190-260V (100V/S)
• Impulse limiting voltage:<800V (1kV/μs)
Through-current capacity: 5kA
Fail safe: short-circuit
10 pcs protective units are integrated as one block.
JPX01-FA9-230S Protective Module
Application and featuresWorking with JPX01-STO-8B 8-pair terminal block (normally
closed);
Providing protection against overvoltages;
• DC breakdown voltage:190-260V (100V/S)
• Impulse limiting voltage:<800V (1kV/μs)
Through-current capacity: 5kA
Fail safe: short-circuit
8 pcs protective units are integrated as one block.
JPX01-FA9-230SE Protective Module
Model Dimensions L×H×D mm
JPX01-FA9-230S 113.2×22.5×41.2
JPX01-FA9-230SE 93.4×22.5×41.2
JPX01 Product Series ( Narrowband )MDF Product Series
A-��
JPX01 Product Series ( Narrowband )MDF Product Series
JPX01 Narrowband Product Accessories Series
Type Name Appearance Function
JPX01-CSS Testing plug• Used for loop testing of the JPX01-FA8-B(BG) or JPX01-STO-8 terminal blocks.
JPX01-DXD IDC tool
• Insulation Displacement Connection tool
with wire cutting device;
• For wires insertion into or removing from
contact element;
•A hook equipped for removing of wires.
JPX01-KLSDisconnection plug
• An insulating plastic plug used for open
connection between contact elements of
JPX01 terminal blocks.
JPX01-KBS-10 Label Holder
• Placed at the first installation position of
the JPX01 terminal block;
• Identify the information, such as line
order.
JPX01-KBS-8 Label Holder
• Placed at the first installation position of
the JPX01 terminal block;
• Identify the information, such as line
order.
JPX01-TBS-10 Label Holder
• Covered on the JPX01 terminal block;
• Identify the information, such as line
order.
JPX01-TBS-8 Label Holder
• Covered on the JPX01 terminal block;
• Identify the information, such as line
order.
A-��
JPX01 Product Series ( Narrowband )MDF Product Series JPX01 Product Series ( Narrowband )MDF Product Series JPX03 Product SeriesMDF Product Series
JPX03 Product Series
JPX03-SF3C Single-sided Frame .............................................................................................................. A-38
JPX03-FA8-128/200 Cable Side Terminal Block ....................................................................................... A-39
JPX03-STO-128B/512B Exchange Side Terminal Block ............................................................................. A-40
JPX03-FA9-400Q SPD ............................................................................................................................ A-41
JPX03-GLS Over-current Plug ................................................................................................................. A-41
JPX03 Series Accessories ........................................................................................................................ A-42
Contents
JPX01 Product Series ( Narrowband )MDF Product Series
A-��
JPX03 Product SeriesMDF Product Series
JPX03-SF3C Single-sided Frame
Application and featuresSingle-sided frame, full front access;
Installed against the wall or back to back installation;
Used with JPX03 product series terminal block;
There are 5 vertical columns of installation poles at
the bottom of the frame, and 5 horizontal rows of
installation poles on the top.
Model Dimensions H×W×D mm
JPX03-SF3C 2350×990×308
A-��
JPX03 Product SeriesMDF Product Series JPX03 Product SeriesMDF Product Series JPX03 Product SeriesMDF Product Series
JPX03-FA8-128/200 Cable Side Terminal Block
Application and featuresModularized design;
IDC connection type;
Full front access, double side cabling;
Side insert SPD and front insert over-current plug is
available;
Different cables have independent cabling area, and
each cable has independent identification;
Applicable wire:
• the diameter of conductor is 0.32~0.6mm
• the maximum outside diameter (insulation layer
included) is no more than
Model Capacity Dimensions L×H×D mm
JPX03-FA8-128 128 pairs/block, 8 pairs/strip 235×100×131
JPX03-FA8-200 200 pairs/block, 8 pairs/strip 360×100×131
JPX03 Product SeriesMDF Product Series
A-��
JPX03 Product SeriesMDF Product Series
JPX03-STO-128B/512B Exchange Side Terminal Block
Application and featuresModularized design;
IDC connection type;
Full front access, double side cabling;
Testing plug and disconnection plug are equipped for line test
and disconnection;
Different cables have independent cabling area, and each
cable has independent identification;
Applicable wire:
• the diameter of conductor is 0.32~0.6mm
• the maximum outside diameter (insulation layer included) is
no more than 1.4mm
Model Capacity Dimensions L×H×D mm
JPX03-STO-128B 128 pairs/block, 8 pairs/strip 235×100×113
JPX03-STO-512B 512 pairs/block, 8 pairs/strip 897×100×113
A-�0
JPX03 Product SeriesMDF Product Series JPX03 Product SeriesMDF Product Series JPX03 Product SeriesMDF Product Series
JPX03-FA9-400Q SPD
Application and featuresUsed to provide primanry protection for exchange
equipments and access equipment;
Used with JPX03-FA8-128/200 cable side terminal block, 8
pairs/pcs;
Adopting GDT (Gas Dischanrge Tube) against overvoltages:
• DC breakdown voltage: 380~550V
• Impulse breakdown voltage: <800V(1kV/us)
Compliant with: ITU-T K.20 (07/2003) Resistibility
of telecommunication equipment installed in a
telecommunications centre to overvoltages and overcurrents.
Model Dimensions L×H×D mm
JPX03-FA9-400Q 104×8.5×34
JPX03-GLS Over-current Plug
Application and featuresUsed to provide primanry protection for exchange equipments
and access equipment;
Used with JPX03-FA8-128/200 cable side terminal block;
Adopting PTCR (Positive Temperature Coefficient Resistor)
against over-currents:
• when I=1A, action time<0.4s
Compliant with: ITU-T K.20 (07/2003) Resistibility of
telecommunication equipment installed in a telecommunications
centre to overvoltages and overcurrents
Compliant with: ITU-T K.30 (03/93) Positive Temperature
Coefficient (PTC) Thermistors
Model Dimensions L×H×D mm
JPX03-GLS 10×6×70
JPX03 Product SeriesMDF Product Series
A-��
JPX03 Product SeriesMDF Product Series
JPX03 Accessories
Accessory Appearance Description
JPX03-DXDIDC tool
• Insulation Displacement Connection tool with
wire-cutting device, used for wire termination and
removing from contact elements;
• It can automatically cut redundant end after wire
terminated.
• Besides, there is a hook for wire removing.
JPX03-CSS Testing Plug
• It is used to perform test on lines.
• One pair of its alligator clips connect to internal line
tester, and another pair of alligator clips connect to
external line tester.
JPX03-KLS Disconnection Plug
• It is used to open the circuit connection at the
inserted position.
A-��
JPX03 Product SeriesMDF Product Series JPX03 Product SeriesMDF Product Series JPX04 Product SeriesMDF Product Series
JPX04 Product Series
JPX04-ZJ10-10 Bracket ........................................................................................................................... A-44
JPX04-FA8-10B 10-Pair Cable Side Terminal Block .................................................................................. A-44
JPX04-FA9-400Q Protective Unit ............................................................................................................ A-45
JPX04-APS-600Y Splitter ........................................................................................................................ A-45
JPX04 Series Accessories ........................................................................................................................ A-46
Contents
JPX03 Product SeriesMDF Product Series
A-��
JPX04 Product SeriesMDF Product Series
JPX04-ZJ10-10 Bracket
Application and featuresJPX04-ZJ10-10 bracket is used to install the JPX04-FA8-10B
10-pair cable side terminal block;
There are 10 positions for installing JPX04-FA8-10B 10-pair
cable side terminal block;
If installed in full configuration, a 100-pair terminal block
will be formed.
Model Dimensions H×W×D mm
JPX04-ZJ10-10 225 ×105 ×45
JPX04-FA8-10B 10-Pair Cable Side Terminal Block
Application and features10-pair/block (if use as a broadband terminal block: 5-pair/
block);
IDC connection type ;
IDC connection pole with cylinder-shaped section;
Contact elements are normally closed;
Enclosed type wire-guiding-board, prevent wires from mis-
connecting efficiently;
Installed on JPX04-ZJ10-10 mounting bracket;
Each pair of lines have own special cabling channels.
Model Dimensions H×W×D mm
JPX04-FA8-10B 21.4×125×58
Installation of JPX04-FA8-10B 10-Pair Cable Side Terminal Block
A-��
JPX04 Product SeriesMDF Product Series JPX04 Product SeriesMDF Product Series JPX04 Product SeriesMDF Product Series
JPX04-FA9-400Q Protective Unit
Application and featuresApplicable to primary protection for equipment of
exchange station and access network;
Used with JPX04-FA8-10B cable side terminal block;
Provide overvoltages protection for loops;
Breakdown voltage: 400V;
Compliant with: ITU-T Rec. K.20 (07/2003) Resistibility
of telecommunication equipment installed in a
telecommunication centre to overvoltages and overcurrents.
Model Dimensions H×W×D mm
JPX04-FA9-400Q 12mm×9.5mm×46(79.5 with PCB)
JPX04-APS-600Y Splitter
Application and featuresUsed to separate ADSL signals from that of POTS;
Front-insertion
Characteristics impedance: 600Ω;
Compliant with ITU-T 992.5 (01.2005) Asymmetric Digital
Subscriber Line Transceiver-extended Bandwidth (ADSL+)
Model Dimensions H×W×D mm
JPX04-APS-600Y 13mm×18mm×50(85 with PCB)
JPX04 Product SeriesMDF Product Series
A-��
JPX04 Product SeriesMDF Product Series
JPX04 Series Accessories
Type Name Function
JPX04-DXD IDC Tool
• With “Insulation Displacement Connection (short
for “IDC”)” wire cutting device.
• For wire insertion onto and removed from contact
element.
• It can cut off redundant lines automatically.
JPX04-CSS Testing Plug
• Front insertion, single loop testing.
• Used together with JPX04-FA8-10B.
• Test if the loop is through or not.
A-��
JPX04 Product SeriesMDF Product Series JPX04 Product SeriesMDF Product Series JPX-MT Product SeriesMDF Product Series
JPX-MT Product Series
JPX-MT-100 Tool-free Cable Side Terminal Block ..................................................................................... A-48
JPX-MT-96 Tool-free Exchange Side Terminal Block ................................................................................ A-49
JPX-MT-FA10-320 Protective Unit ........................................................................................................... A-49
Contents
JPX04 Product SeriesMDF Product Series
A-��
JPX-MT Product SeriesMDF Product Series
JPX-MT-100 Tool-free Cable Side Terminal Block
Application and featuresJPX-MT-100 tool-free cable side terminal block is mainly
composed of 10 pairs strips,10 pairs protective unit retainer,
50 pin cable connectors, frame and bending connecting
fitting;
Side inserted protective unit can realize over-current and
over-voltage protection;
100 pairs/block;
10 strip/block;
10 pairs/strip;
10 protective units retainer/block;
4pcs cable connector/block;
50pin (25 pairs)/cable connector;
Applicable diameter of wire is 0.32mm~0.6mm.
Model Dimensions H×W×D mm
JPX-MT-100 219×132×218
A-��
JPX-MT Product SeriesMDF Product Series JPX-MT Product SeriesMDF Product Series JPX-MT Product SeriesMDF Product Series
JPX-MT-FA10-320 Protective Unit
Application and featuresJPX-MT-FA10-320 protective unit provides over-voltage
and over-current protection functions;
Used with JPX-MT-100 toll free cable side terminal
block;
Side inserted;
Adopting solid arrestor (SA), PTCR as protection
components.
JPX-MT-96 Tool-free Exchange Side Terminal Block
Application and featuresJPX-MT-96 tool-free exchange side terminal block
includes 8-pairs strips, 68pin cable connector, frame,
and bending connecting fitting;
96 pairs/block;
12 strips/block;
8 pairs/strip;
3pcs cable connectors/block;
68pin cable connector;
Applicable diameter of wire is 0.32mm~0.6mm.
Model Dimensions H×W×D mm
JPX-MT-96 113×248×56
Model Dimensions H×W×D mm
JPX-MT–FA10-320 51×19.2×12.7
JPX-MT Product SeriesMDF Product Series
A-��
JPX-MT Product SeriesMDF Product Series
JPX321 Product Series
JPX321-BM2-128F/96F Broadband Terminal Block ................................................................................. A-51
AS-9K Splitter ........................................................................................................................................ A-52
JPX321 Accessories ................................................................................................................................ A-53
Contents
A-�0
JPX321 Product SeriesMDF Product Series JPX321 Product SeriesMDF Product Series JPX321 Product SeriesMDF Product Series
JPX321-BM2-128F/96F Broadband Terminal Block
Application and featuresCapacity: 128 pair/block or 96-pair/block respectively;
Used for termination of PSTN cable and jumper
connection, as well as test and disconnection;
Used for deployment xDSL service, separating xDSL
signals from POTS signals;
Rotatable;
Back plug-in splitter;
If splitter is removed, direct connection is made
between LINE and PSTN;
Contacts of IDC connect-elements is normal-closed;
Applicable wire:
• The diameter of conductor is 32mm~0.6mm;
• The maximum outer diameter (including the
insulation coat) is not more than 1.4mm.
ModelDimensions H×W×D mm
Package (mm3)
JPX321-BM2-128F 150×275×115 510×430×315/(8pcs)
JPX321-BM2-96F 150×210×115 535×325×295/(8pcs)
JPX321 Product SeriesMDF Product Series
A-��
JPX321 Product SeriesMDF Product Series
AS-9K Splitter
Application and featuresUsed with JPX321-BM2-128F/96F broadband terminal
block;
Used to separate ADSL signals from POTS signals;
Back plug-in;
Characteristics impedance: 600Ω
ModelDimensions H×W×D mm
Package (mm3)
AS-9K 12.5×13×71 350×230×245/(900pcs)
A-��
JPX321 Product SeriesMDF Product Series JPX321 Product SeriesMDF Product Series JPX321 Product SeriesMDF Product Series
JPX321 Accessories
Name Appearance Features and functions
JPX321-CSS-testing plug
• Used with JPX321-BM2-128F/96F broadband terminal block;
• Used in loop test;• Back plug-in unit.
JPX321-ZLS-switching plug
• Used with JPX321-BM2-128F/96F broadband terminal block;
• Disconnecting broadband signals and connecting narrowband signals;
• Back plug-in unit;• L×H×D=12.5×13×71mm.
JPX321-KLS-disconnecting plug
• Used with JPX321-BM2-128F/96F broadband terminal block;
• Open connection of loop;• Back plug-in unit;• L×H×D=12.5×13×71mm.
JPX-DXD1-IDC Tool
• IDC (Insulation Displacement Connection) tool with wire-cutter;
• Used to insert wires into connect-slot of terminal blocks or remove wires from terminal blocks;
• Redundant ends of wires can be cut automatically after wires are terminated;
• Hooks for removing wires are equipped.
JPX321 Product SeriesMDF Product Series
A-��
JPX321 Product SeriesMDF Product Series
JPX02 Product Series
JPX02-BM-64 Broadband Terminal Block ................................................................................................ A-55
Splitter
JPX02-APS-270EF Splitter ....................................................................................................................... A-56
JPX02-APS-600Y (C) Splitter ................................................................................................................... A-56
JPX02-AIS-135E Splitter ......................................................................................................................... A-57
JPX02 Accessories .................................................................................................................................. A-58
Contents
A-��
JPX02 Product SeriesMDF Product Series JPX02 Product SeriesMDF Product Series JPX02 Product SeriesMDF Product Series
JPX02-BM-64 Broadband Terminal Block
Application and featuresCapacity: 4 functional units/block (16-pairs / functional
unit), 64-pairs / block;
Horizontal-installed block, in which every functional unit
can be rotated about 150° to open as a whole;
Full front and upside access;
Different cables have independent termination area,
and each cable has independent and different color
identification;
Super-large cabling hole make cabling easy and
convenient to meet different cabling requirements;
Fully covered cabling trough preventing mis-cabling
between ports;
The raised flange designed at termination ports has no
influence on cabling, and makes cables terminated at
some radian, which is convenient for IDC tool to draw
cables out and operate second time terminating;
Back-insertion splitter;
A mechanism designed for anti-reverse-insertion of
splitter in the block;
Operation of cable termination and maintenance have
no influence on splitter;
The block is suitable for wires with core diameter
0.32~0.6mm; the maximum outside diameter (insulation
layer included) should not exceed 1.4mm.
Features of 16-pairs functional unit:
• 8-pairs/strip;
• 2 strip/unit, there are three rows of
IDC connection slot in each strip for
connection of DSLAM, POTS jumper
and external line jumper respectively.
No cables are inter-crossed due to
management of lead-in holes.
Model Dimensions H×W×D mm
JPX02-BM-64 134×178×145
JPX02 Product SeriesMDF Product Series
A-��
JPX02 Product SeriesMDF Product Series
JPX02-APS-270EF Splitter
Application and featuresUsed to separate ADSL signals from that of POTS;
Back-insertion;
Characteristics impedance: 270Ω+ (750 Ω || 150 nF)
Compliant with: ETSI TS 101 952-1-1 V1.2.1 Access
network xDSL transmission filters; Part 1: ADSL
splitters for European deployment; Sub-part 1: Generic
specification of the low pass part of DSL over POTS
splitters including dedicated annexes for specific xDSL
variants;
Compliant with: ETSI TS 101 952-1-2 V1.1.1 Access
network xDSL transmission filters; Part 1: ADSL splitters
for European deployment; Sub-part 2: Specification of
the high pass part of ADSL/POTS splitters.
Model Dimensions H×W×D mm
JPX02-APS-270EF 22×9.8×111.5
JPX02-APS-600Y (C) Splitter
Application and featuresUsed to separate ADSL signals from that of POTS;
Back-insertion;
Characteristics impedance: 600Ω;
Compliant with: ITU-T G.992.5 (01.2005) Asymmetric
Digital Subscriber Line transceivers–Extended bandwidth
(ADSL2+)
Model Dimensions H×W×D mm Remark
JPX02-APS-600Y 22 ×9.8× 111.5LINE—xDSL, without coupling capacitance
JPX02-APS-600Y(C) 22 ×9.8× 111.5LINE—xDSL, with coupling capacitance (120nF)
A-��
JPX02 Product SeriesMDF Product Series JPX02 Product SeriesMDF Product Series JPX02 Product SeriesMDF Product Series
JPX02-AIS-135E Splitter
Application and featuresUsed to separate ADSL signals from that of ISDN;
Back-insertion;
Characteristics impedance: 135Ω;
Compliant with: ETSI TS 101 952-1-1 V1.2.1 Access
network xDSL transmission filters; Part 1: ADSL
splitters for European deployment; Sub-part 1: Generic
specification of the low pass part of DSL over POTS
splitters including dedicated annexes for specific xDSL
variants;
Compliant with: ETSI TS 101 952-1-2 V1.1.1 Access
network xDSL transmission filters; Part 1: ADSL splitters
for European deployment; Sub-part 2: Specification of
the high pass part of ADSL/POTS splitters.
Model Dimensions H×W×D mm
JPX02-AIS-135E 22×9.8×111.5
JPX02 Product SeriesMDF Product Series
A-��
JPX02 Product SeriesMDF Product Series
Accessory Appearance Description
JPX02-KLS disconnection plug
• used to open the connection of POTS and LINE
at the inserted position.
JPX02-CSS testing plug
• A back-insertion piece;
• disconnect POTS and LINE when test;
• there are three pairs of alligator clips
corresponding respectively to POTS, LINE and
DSLAM of a loop.
JPX-DXD1 IDC tool
• Insulation Displacement Connection tool with
wire-cutting device, used for wire termination
and removing from contact elements;
• It can automatically cut redundant end after
wire terminated.
• Besides, there is a hook for wire removing.
JPX02 Accessories
A-��
JPX02 Product SeriesMDF Product Series JPX02 Product SeriesMDF Product Series JPX01 Product Series (Broadband)MDF Product Series
JPX01 Product Series (Broadband)
JPX01-HB Series
Mounting Bracket Series ........................................................................................................................ A-60
Terminal Block Series ............................................................................................................................. A-60
Protective Module.................................................................................................................................. A-61
Splitter Series ......................................................................................................................................... A-62
HB Accessories Series ............................................................................................................................. A-63
JPX01-BD Series
Mounting Bracket Series ........................................................................................................................ A-64
Terminal Block Series ............................................................................................................................. A-64
Splitter Series ......................................................................................................................................... A-65
BD Accessories Series ............................................................................................................................ A-66
JPX01-TT Series
Terminal Block Series ............................................................................................................................. A-67
Splitter Series ......................................................................................................................................... A-67
TT Accessories Series .............................................................................................................................. A-68
Contents
JPX02 Product SeriesMDF Product Series
A-��
JPX01 Product Series (Broadband)MDF Product Series
JPX01Broadband Product-- HB Series
Application and featuresJPX01-ZJ-100 used as mounting bracket of JPX01-FA8-10HB
10-pair terminal blocks (normally closed);
There are 10 installation positions (abbreviated as
position) for installing JPX01-FA8-10HB;
If installed in full configuration, a 100-pair terminal block
will be formed.
JPX01-ZJ-100 100-pair mounting bracket
Application and features10 pair/ block;
IDC contact element is normally closed;
Can be installed both on rod (with diameter of Ф12mm),
or on mounting bracket;
Meet the transmission requirements of VDSL signals.
JPX01-FA8-10HB 10-pair terminal block (normally closed)
JPX01-- FA8-10HB Broadband Terminal Block
Model Dimensions W×H×D mm
JPX01-ZJ-100 102×225×50
Model Dimensions L×H×D mm
JPX01-FA8-10HB 126.6×21.5×41
A-�0
JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series
JPX01-- FA9-230SH Protective Module
Application and featuresWorking with JPX01-FA8-10HB 10-pair terminal block
(normally closed);
Providing protection against overvoltages;
• DC breakdown voltage: 190-260V (100V/S)
• Impulse limiting voltage: <800V (1kV/μs)
Through-current capacity: 5kA;
Fail safe: short-circuit;
10 pcs protective units are integrated as one block.
JPX01-FA9-230SH Protective Module
JPX01 Product Series (Broadband)MDF Product Series
A-��
JPX01 Product Series (Broadband)MDF Product Series
JPX01 VDSL2 Splitters
Application and featuresUsed to separate transmission of VDSL2 signals from
POTS signals;
Characteristics impedance:600 ohm;
Compliant with ITU-T G.993.2 (02.2006) Very high speed
digital subscriber line transceivers 2 (VDSL2).
JPX01-VPS-600I VDSL2 Splitter
Application and featuresUsed to separate transmission of VDSL2 signals from
POTS signals;
Characteristics impedance:270 ohm;
Compliant with ITU-T G.993.2 (02.2006) Very high speed
digital subscriber line transceivers 2 (VDSL2);
Compliant with ETSI TS 101 952-1-1 V1.2.1 (2004-12)
specification of the low pass part of DSL over POTS
splitters.
JPX01-VPS-270E VDSL2 Splitter
Model Dimensions H×W×Dmm
JPX01-VPS-600I 21.6x18.5X106
JPX01-VPS-270E 21.6x18.5X106
A-��
JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series
JPX01Broadband Product-- HB Series
Type Name Appearance Function
JPX01-CSSH Testing Plug •Used for JPX01-FA8-10HB VDSL Testing.
JPX01-DXD IDC Tool
• Insulation Displacement Connection tool
with wire cutting device;
• For wires insertion into or removing from
contact element;
•A hook equipped for removing of wires.
JPX01-KBS-10 Label Holder
• Placed at the first installation position of
the JPX01 terminal block;
• Identify the information , such as line
order.
JPX01-TBS-10 Label Holder
•Covered on the JPX01 terminal block;
• Identify the information , such as line
order.
JPX01 Product Series (Broadband)MDF Product Series
A-��
JPX01 Product Series (Broadband)MDF Product Series
JPX01Broadband Product-- BD Series
Application and featuresJPX01-ZJ10-10D used as mounting bracket of JPX01-FA8-
10BD 10-pair terminal block (normally closed);
There are 10 positions for installing JPX01-FA8-10BD;
If installed in full configuration, a 100-pair terminal block
will be formed.
JPX01-ZJ10-10D mounting bracket
Application and featuresJPX01-FA8-10BD 10-pair terminal block (normal closed)
Installed on JPX01-ZJ10-10D mounting bracket;
Back-inserted JPX01-APS-600Y or JPX01-APS-600YC
splitter.
JPX01-FA8-10BD Broadband Terminal Block
Model Dimensions W×H×D mm
JPX01-ZJ10-10D 102×225×85
Model Dimensions L×H×D mm
JPX01-FA8-10BD 123.3×20.5×34
A-��
JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series
Application and featuresUsed to separate transmission of ADSL signals from POTS
signals;
Use together with JPX01-FA8-10BD ;
Characteristics impedance: 600 ohm;
With anti-reverse-insertion design;
Compliant with ITU-T G.992.5 (01.2005) Asymmetric
Digital Subscriber Line transceivers–Extended bandwidth
(ADSL2+).
JPX01-APS-600Y (C) Splitters
Model Dimensions L×H×D mm Remark
JPX01-APS-600Y 59.9×13×17.6 Without DC blocking capacitor between Line and DSL.
JPX01-APS-600YC 59.9×13×17.6With DC blocking capacitor between Line and DSL.
JPX01 Product Series (Broadband)MDF Product Series
A-��
JPX01 Product Series (Broadband)MDF Product Series
JPX01 Broadband Product-- BD Accessories Series
Type Name Appearance Remark
JPX01-DXD IDC Tool
• Insulation Displacement Connection tool with wire cutting device;
• For wires insertion into or removing from contact element;
•A hook equipped for removing of wires.
JPX01-KBS-10 Label Holder
• Placed at the first installation position of
the JPX01 terminal block;
• Identify the information , such as line
order.
JPX01-TBS-10 Label Holder
•Covered on the JPX01 terminal block;
• Identify the information , such as line
order.
A-��
JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series
JPX01 Broadband Product -- TT Product Series
Application and features10-pair/unit; 70-pair/block;
IDC connection type ( 45°);
Back-insertion of JPX01-APS-600E splitter separating the
transmission of POTS signals and DSL signals;
3 application positions: ±45° position for wires
termination, 0° position for normal use, +45°position for
splitter insertion/remove and maintenance.
JPX01-BM-70B Broadband Terminal Block
Application and featuresUsed to separate transmission of ADSL signals from POTS
signals;
Used with JPX01-BM-70B;
Characteristics impedance: 600 ohm;
Compliant with ETSI TS 101 952-1-1 V1.2.1 (2004-12)
specification of the low pass part of DSL over POTS
splitters.
JPX01-APS-600E Splitter
Model Dimensions L×H×D mm
JPX01-BM-70B 232×100×190
Model Dimensions L×H×D mm
JPX01-APS-600E 105×18.5×9.5
JPX01 Product Series (Broadband)MDF Product Series
A-��
JPX01 Product Series (Broadband)MDF Product Series
JPX01 Broadband Product -- TT Accessories Series
Type Name Appearance Remark
JPX01-CSS-RJ11 Testing Plug
• Used for loop testing of JPX01-BM-70 terminal block;
• One end of it is RJ11connector (inserted into splitter), the other end equipped with red and black clips connect to testing apparatus.
JPX01-DXD IDC Tool
• Insulation Displacement Connection tool
with wire cutting device;
• For wires insertion into or removing from
contact element;
•A hook equipped for removing of wires.
A-��
JPX01 Product Series (Broadband)MDF Product Series JPX01 Product Series (Broadband)MDF Product Series FT Product SeriesMDF Product Series
FT Product Series
FT8804 Series
FT8804-64B Wire-wrap Connection Type Broadband Terminal Block ...................................................... A-70
FT8804-8A Splitter ................................................................................................................................. A-71
FT8804-APS-600Y (C) Splitter ................................................................................................................. A-71
FT8804 Accessories ............................................................................................................................... A-72
FT8805 Series
FT8805-64A IDC Type Cable Side Terminal Block .................................................................................... A-73
FT8805-8A Splitter ................................................................................................................................. A-73
FT8805-APS-600Y (C) Splitter ................................................................................................................. A-74
FT8805-FA9-2 SPD (Surge Protection Device) ......................................................................................... A-74
FT8805 Accessories ............................................................................................................................... A-75
Contents
JPX01 Product Series (Broadband)MDF Product Series
A-��
FT Product SeriesMDF Product Series
FT8804-64B Wire-wrap Connection Type
Broadband Terminal Block
Application and featuresUsed in MDF in central office for cable connection,
jumping and termination of DSLAM cables and PSTN
cables ;
Adopting wire-wrapping connection mode;
Rotatable;
Separating xDSL signals from POTS signals at central office
by using back plug-in splitter;
When SPL is removed, LINE is connected with PSTN
directly.
Model Dimensions H×W×D mm
FT-8804-64B 138×249×141
A-�0
FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series
FT8804-64B Wire-wrap Connection Type
Broadband Terminal Block
FT8804-8A Splitter
Application and featuresBack-inserted;
Used with FT8804-64B broadband terminal block;
Used to separate ADSL signals form POTS signals;
Characteristics impedance: 270Ω+ (750 Ω || 150 nF)
Compliant with: ETSI TS 101 952-1-1 V1.2.1 Access
network xDSL transmission filters; Part 1: ADSL splitters for
European deployment; Sub-part 1: Generic specification
of the low pass part of DSL over POTS splitters including
dedicated annexes for specific xDSL variants
Compliant with: ETSI TS 101 952-1-2 V1.1.1 Access
network xDSL transmission filters; Part 1: ADSL splitters
for European deployment; Sub-part 2: Specification of the
high pass part of ADSL/ POTS splitters.
Model Dimensions H×W×D mm
FT-8804-8A 13×21×91
FT8804-APS-600Y (C) Splitter
Application and featuresBack-inserted;
Used with FT8804-64B broadband terminal block;
Used to separate ADSL signals form POTS signals;
Characteristics impedance: 600Ω;
Compliant with: ITU-T G.992.5 (01.2005) Asymmetric
Digital Subscriber Line transceivers–Extended bandwidth
(ADSL2+)
Model Dimensions H×W×D mm Remark
FT8804-APS-600Y 13 ×21× 91LINE—xDSL, without coupling capacitance
FT8804-APS-600YC 13 ×21× 91LINE—xDSL, with coupling capacitance (120nF)
FT Product SeriesMDF Product Series
A-��
FT Product SeriesMDF Product Series
FT8804 Accessories
Accessory Appearance Description
FT8804-CSS testing plug
• Used with FT8804-64B broadband terminal block;
• Used in loop test;• Back-inserted
Wrapping-connection tool
• Wrapping-connection tool used for wires termination on pins of FT8804-64B terminal block.
A-��
FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series
FT8805-64A IDC Type Cable Side Terminal Block
Application and featuresUsed in MDF in central office for cable connection,
jumping and termination of DSLAM cables and PSTN
cables;
Separating xDSL signals from POTS signals in central
office by using back plug-in splitter;
Providing surge protection for circuits of PSTN-side
and jumper-side by using back plug-in SPD.
Rotatable terminal block;
IDC type;
There designed multi-connection port on IDC contact-
elements corresponding to customer-side and PSTN-
side cables;
When SPL is removed, LINE is connected with PSTN
directly.
Model Dimensions H×W×D mm
FT8805-64A 230.5×148.5×132.5
FT8805-8A Splitter
Application and featuresUsed with FT8805-64A terminal block;
Back plug-in;
Used to separate ADSL signals from POTS signals;
Characteristics impedance:270Ω+ (750 Ω || 150 nF);
Compliant with: ETSI TS 101 952-1-1 V1.2.1 Access
network xDSL transmission filters; Part 1: ADSL
splitters for European deployment; Sub-part 1: Generic
specification of the low pass part of DSL over POTS
splitters including dedicated annexes for specific xDSL
variants
Compliant with: ETSI TS 101 952-1-2 V1.1.1 Access
network xDSL transmission filters; Part 1: ADSL splitters
for European deployment; Sub-part 2: Specification of
the high pass part of ADSL/POTS splitters.
Model Dimensions H×W×D mm
FT8805-8A 13×18×108.5
FT Product SeriesMDF Product Series
A-��
FT Product SeriesMDF Product Series
FT8805-APS-600Y (C) Splitter
Application and featuresBack-inserted;
Used with FT8805-64A broadband terminal block;
Used to separate ADSL signals form POTS signals;
Characteristics impedance: 600Ω;
Compliant with: ITU-T G.992.5 (01.2005) Asymmetric
Digital Subscriber Line transceivers–Extended bandwidth
(ADSL2+)
FT8805- FA9-2 SPD (Surge Protection Device)
Application and featuresProvide protection function for lines by discharging
surges to the ground;
Used with FT8805-64A broadband terminal block;
Back plug-in;
FT8805-FA9-2 SPD adopting 420V GDT(gas discharge
tube):
• DC breakdown voltage: 330-600V(100V/S)
• Impulse limited voltage: 350-850V(1kV/μs)
SPD with different specification of GDT is available upon
request.
Model Dimensions H×W×D mm
FT8805-FA9-2 13×9.5×108.5
Model Dimensions H×W×D mm Remark
FT8805-APS-600Y 13 ×18× 108.5LINE—xDSL, without coupling capacitance
FT8805-APS-600YC 13 ×18× 108.5LINE—xDSL, with coupling capacitance (120nF)
A-��
FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series FT Product SeriesMDF Product Series
FT8805 Accessories
Accessory Appearance Description
FT8805-CSS Testing plug
• Used with FT8805-64A cable side terminal block;
• Used in line test;• Back plug-in.
JPX-DXD1-IDC tool
• IDC (Insulation Displacement Connection) tool with wire-cutter;
• Used to insert wires into connect-slot of terminal blocks or remove wires from terminal blocks;
• Redundant ends of wires can be cut automatically after wires are terminated;
• Hooks for removing wires are equipped.
FT Product SeriesMDF Product Series
A-��
FT Product SeriesMDF Product Series
JPX Integrated Products
JPX-JJX-1200 Cable Cross-connecting Box .............................................................................................. A-77
JPX-FXH-100/30 Outdoor Distribution Box ............................................................................................. A-78
Accessories ............................................................................................................................................ A-79
Contents
A-��
JPX Integrated ProductsMDF Product Series JPX Integrated ProductsMDF Product Series JPX Integrated ProductsMDF Product Series
JPX-JJX-1200 Cable Cross-connecting Box
Application and featuresUsed for indoor or outdoor cables connection and
termination;
Enclosure material: SMC composite material;
Protection level: IP53;
Single-sided installation;
The door of box can be opened outwards about 120° ;
Capacity : 1200-pair.
Model Dimensions H×W×D mm
JPX-JJX-1200 1550×760×320
JPX Integrated ProductsMDF Product Series
A-��
JPX Integrated ProductsMDF Product Series
JPX-FXH-100/30 Outdoor Distribution Box
Application and featuresOne side connects with subscriber side, and another side
connects with harness of subscriber line from central
office;
Realize the function of cables reconnection and
distribution;
Enclosure material: ABS material;
Protection level: IP53
Non-flammable level: UL94 V-0
Capacity of JPX-FXH-100: 100-pair;
Capacity of JPX-FXH-30: 30-pair.
Model Dimensions H×W×D mm
JPX-FXH-100 380×185×113
JPX-FXH-30 210×135×85
A-��
JPX Integrated ProductsMDF Product Series JPX Integrated ProductsMDF Product Series JPX Integrated ProductsMDF Product Series
Accessories
Type Name Appearance Function
JPX01-CSS Testing Plug •Used to test the internal and external lines.
JPX01-DXD IDC Tool
• Insulation Displacement Connection tool
with wire-cutting device, used for wire
termination and removing from contact
elements;
• It can automatically cut redundant end after
wire terminated.
•Besides, there is a hook for wire removing.
KLS Disconnection Plug
•Insulation plastic unit ;
• Used to disconnect the connection of the
internal and external lines.
JPX01-KBS-10 Label Holder• Used to identify the information of the
terminal block, such as line order.
JPX Integrated ProductsMDF Product Series
A-��
JPX Integrated ProductsMDF Product Series
DDF Product SeriesDDF Product Series
DDF Product SeriesDDF Product Series
DDF Frame (Cabinet) sereis .......................................................................................B-2
DDF Digital Unit series ............................................................................................B-19
DDF Surge Protective Product Series ......................................................................B-38
DDF Box & Transmission Interface Box Series .........................................................B-42
Tool Kit Series ........................................................................................................B-45
Mounting Board Series ...........................................................................................B-47
Cables and Cable Heads Used in DDF .....................................................................B-51
Digital Distribution Frame (DDF) Product Series
Huawei’s DDF products meet EU RoHS regulations. There is a complete series of products to satisfy different
customers’ requirements:
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
Digital Distribution Frame Series
DDF (Digital Distribution Frame) is the distribution equipment used between digital multiplexers, between digital
multiplexer and exchange equipment or non voice service equipment. It can connect, patch and test cables
which transmit digital signals by adopting connectors.
Huawei has two categories of DDF series named MPX 272 and MPX 286 series.
Working conditions:
Working temperature: -5℃~+40℃
Relative humidity: ≤85% (+30℃)
Atmospheric pressure: 70kPa~106kPa
75ohm DDF- MPX272 ........................................................................................................................B-3
120ohm DDF- MPX286 ....................................................................................................................B-12
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
75ohm DDF - MPX272
Electrical Performance ...............................................................................................................................B-4
MPX272 DDF
MPX272-F1/F2/F3 .....................................................................................................................................B-5
MPX272-F4/F5/F6 .....................................................................................................................................B-6
MPX272-R4/R5/R6 ....................................................................................................................................B-7
MPX272-FM600 Series .............................................................................................................................B-8
MPX272-FM800 Series .............................................................................................................................B-9
MPX272-CM600 Series ...........................................................................................................................B-10
MPX272-CM800 Series ...........................................................................................................................B-11
Contents
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
Electrical performance Performance Indexes
Working ratea) 2Mbit/s, 8Mbit/s, 34Mbit/s, 45Mbit/s, 140Mbit/s, 155Mbit/s;B) 2Mbit/s, 8Mbit/s, 34Mbit/s (Only suitable for coaxial connector whose diameter of inner
conductor is 1.24mm or for the connector with approximate structure)
Characteristic impedance
75ohm
Contact resistanceFor external conductor≤2.5mΩ, increment after mechanical durability and salt-fog test ≤2.5mΩ
For internal conductor≤5mΩ,increment after mechanical durability and salt-fog test ≤5mΩ
Insulation resistanceThe insulation resistance between external and internal conductor of coaxial connector, and between internal conductor and metal parts of unit≥1000MΩ, and the DC voltage of the test loop is 500V±50V
Dielectric strengthIt can withstand the test with no breakdown and arcing under the exerted voltage of 1000V AC (rms) of 50Hz for one minute, between inner and outer conductor of coaxial connector, and between inner conductor and metal parts of unit.
Crosstalk defense ratio a) ≥70 dB (50kHz~233 kHz)b) ≥70 dB (50kHz~51 kHz) (Only suitable for coaxial connector whose diameter of internal
conductor is 1.24mm or the connector with approximate structure)
Insertion lossa) ≤0.3 dB (50kHz~233 kHz)b) ≤0.3 dB (50kHz~51 kHz) (Only suitable for coaxial connector whose diameter of internal
conductor is 1.24mm or the connector with approximate structure)
Return lossa) ≥18 dB (50kHz~233 kHz)b) ≥18 dB (Only suitable for coaxial connector whose diameter of internal conductor is 1.24mm
or the connector with approximate structure)
Electrical Performance
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-F1/F2/F3
Main FeaturesDouble-sided frame, full front operation;
Open structure;
The unit can be turned 90° downwards and
outwards, allowing temporary reconnection and
patch.
Model H×W×D (mm)Configured unit & Full-configuration capacity E1 Weight
(kg)With FS-1 With FS-2 With FSM800-3 With FSM800-4
MPX272-F1 2600×600×450 288 360 416 520 50
MPX272-F2 2200×600×450 240 300 352 440 45
MPX272-F3 2000×600×450 224 280 320 400 42
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-F4/F5/F6
Main FeaturesDouble-sided frame, full front operation;
Open structure;
The unit can be turned 90° downwards and
outwards, allowing temporary reconnection and
Model H×W×D (mm)Configured unit & Full-configuration capacity E1 Weight
(kg)With FS-1 With FS-2 With FSM800-3 With FSM800-4
MPX272-F4 2600×600×300 144 180 208 260 38
MPX272-F5 2200×600×300 120 150 176 220 35
MPX272-F6 2000×600×300 112 140 160 200 32
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-R4/R5/R6
Main FeaturesSuitable for small-capacity station;
Single-sided frame, full front operation;
Open structure;
The unit can be turned 90° downwards and
outwards, allowing temporary reconnection and
patch.
Model H×W×D (mm)Full-configuration capacity E1 Weight
(kg)With SM5 unit
MPX272-R4 2600×240×260 96 32
MPX272-R5 2200×240×260 80 30
MPX272-R6 2000×240×260 72 27
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-FM600 Series
Main FeaturesDouble-sided frame, full front operation allowing
the second time distribution;
Open structure;
The left and right side unit can be turned 90°
outwards, allowing temporary reconnection and
patch;
The middle cabling channels allows the front
distribution.
Model H×W×D (mm)Configured unit & Full-configuration capacity E1 Weight
(kg)With FSM600-1 With FSM600-2
MPX272-F1M600 2600×600×450 288 360 60
MPX272-F2M600 2200×600×450 256 320 55
MPX272-F3M600 2000×600×450 224 280 50
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-FM800 Series
Main FeaturesDouble-sided frame, full front operation allowing
the second-time distribution;
Open structure;
The unit can be turned 90° downwards and
outwards, allowing temporary reconnection and
patch.
Model H×W×D (mm)Full-configuration capacity Weight
(kg)With FS-1 With FS-2 With FSM800-3 With FSM800-4
MPX272-F1M800 2600×800×450 288 360 416 520 55
MPX272-F2M800 2200×800×450 240 300 352 440 50
MPX272-F3M800 2000×800×450 224 280 320 400 47
B-�
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-CM600 Series
Main FeaturesDouble-sided frame, front operation allowing the
second time distribution;
The left and right side unit can be turned 90°
outwards, allowing temporary reconnection and
patch;
The middle cabling channels allows the front
distribution.
Model H×W×D (mm)Configured unit & Full-configuration capacity E1 Weight
(kg)With FSM600-1 With FSM600-2
MPX272-C1M600 2600×600×450 288 360 130
MPX272-C2M600 2200×600×450 256 320 115
MPX272-C3M600 2000×600×450 224 280 105
B-�0
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX272-CM800 Series
Main FeaturesDouble-sided cabinet, full front operation allowing
the second time distribution;
The unit can be turned 90° downwards and
outwards, allowing temporary reconnection an patch.
Model H×W×D (mm)Configured unit & Full-configuration capacity E1 Weight
(kg)With FS-1 With FS-2 With FSM800-3 With FSM800-4
MPX272-C1M800 2600×800×450 288 360 416 520 155
MPX272-C2M800 2200×800×450 240 300 352 440 135
MPX272-C3M800 2000×800×450 224 280 320 400 125
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
120ohm DDF- MPX286
Electrical Performance .............................................................................................................................B-13
MPX286 DDF
MPX286-R1/R2/R3 (IDC connectIion type) ...............................................................................................B-14
MPX286-xDF (IDC connection type) ........................................................................................................B-15
MPX286-RF800 Series (wire-wrap connection type) ................................................................................B-17
MPX286-XF Series (wire-wrap connection type) ......................................................................................B-18
Contents
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
Electrical Performance Performance Indexes
Working rate 2Mbit/s
Characteristic Impedance 120ohm
Contact Resistance
The contact resistance of IDC termination (or at wire-wrapping connection termination) ≤3mΩ, increment after mechanical durability and salt fog test ≤2mΩ;The contact resistance between IDC contact-elements≤7mΩ, increment after mechanical durability and salt fog test ≤3mΩ;The contact resistance of balanced type multi-plug socket ≤10mΩ, increment after mechanical durability and salt fog test ≤10mΩ.
Insulation Resistance (500VDC±50VDC)
The resistance under standard atmospheric condition≥1000MΩ
The resistance after high and low temperature tests ≥100MΩ
The resistance after humidity-heat test ≥2×10MΩ
Dielectric Strength (without breakdown and arcing under test voltage at 50Hz frequency for one minute)
The strength under standard atmospheric condition≥500V AC
The strength after high and low temperature tests ≥500V AC
The strength after humidity-heat tests ≥250V AC
Crosstalk defense ratio ≥60 dB (50kHz~3.1MHz)
Insertion loss ≤0.4 dB (50kHz~3.1MHz)
Return loss ≥18 dB (50kHz~3.1MHz)
Electrical Performance
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX286-R1/R2/R3 (IDC Connection Type)
Main FeaturesSuitable for small-capacity station;
Single-sided frame, full front operation;
Flexible installation modes: installation lean-against
wall or back-to-back installation.
Model H×W×D (mm)Full-configuration capacity E1 Weight
(kg)With MPX286-16
MPX286-R1 2600×300×300 256 42
MPX286-R2 2200×300×300 208 35
MPX286-R3 2000×300×300 192 32
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX286-xDF (IDC Connection Type)
Main FeaturesSuitable for medium-capacity and large-capacity
stations;
Double-sided frame, full front operation;
“X” refers to column number, three types frame
with different height for each sort;
Customers select products according to different
capacity and space.
Model H×W×D (mm)
Full-configuration capacity E1 Weight
(kg)With MPX286-16
MPX286-2DF1 2600×500×600 384 62
MPX286-2DF2 2200×500×600 320 56
MPX286-2DF3 2000×800×450 288 52
MPX286-3DF1 2600×750×600 576 94
MPX286-3DF2 2200×750×600 480 84
MPX286-3DF3 2200×750×600 432 79
MPX286-4DF1 2600×1000×600 768 125
MPX286-4DF2 2200×1000×600 640 112
MPX286-4DF3 2000×1000×600 576 105
MPX286-5DF1 2600×1250×600 960 156
MPX286-5DF2 2200×1250×600 800 140
MPX286-5DF3 2000×1250×600 720 132
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX286-2DF series MPX286-3DF series
MPX286-4DF series MPX286-5DF series
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series
MPX286-RF800 Series (Wire-wrap-connection Type)
Main FeaturesStandard 19 inch open frame;
Cables of transmission equipment and exchange are
terminated at the back of frame, while the jumper of
connection equipment is terminated at the front;
It is easy to make self-loop test, on-line test and
jumper test with accessories.
Model Dimensions H×W×D mm Single-sided Full-configuration (E1)
with RF/120 (64/32 E1)
MPX286-R1F800/R1C800 2600×800×300 10×(64/32)= 640/ 320
MPX286-R2F800/R2C800 2200×800×300 8×(64/32)= 512/256
MPX286-R3F800/R3C800 2000×800×300 7×(64/32)= 448/224
Remark: In 64/32E1, 64E1— direct connection capacity, 32E1 —cross-connection capacity.
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Distribution Frame SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
MPX286-XF Series (Wire-wrap-connection Type)
Main FeaturesAdopting indicator to tracking & indicating jumper
route quickly and clearly, reducing the cost of
operation and maintenance;
Cables of equipment are terminated at the back of
frame, while the jumpers terminated at the front;
Compact design and large-capacity;
Flexible configuration and smooth expansion;
Configuring circuit card upon customized
requirements.
Model Dimensions H×W×D mm Circuit card Capacity ( circuit card)
MPX286-XF1 2600×800×300
MPX286-E1
1024
MPX286-XF2 2200×800×300 832
MPX286-XF3 2000×800×300 768
B-��
Digital Distribution Frame SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
Digital Unit Product Series
Digital Unit Series .............................................................................................................................B-20
By Installation Mode .........................................................................................................................B-21
By Characteristic Impedance .............................................................................................................B-22
Other DDF Unit .................................................................................................................................B-32
Contents
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
19” installation mode
120 ohm digital unit
75ohm digital unit
L9 connector
BNC connector
2 E1 75 ohm digital unit
ETSI installation mode
Other digital unit-2 E1digital unit
According to installation mode
Digital Unit Series
2 E1 120 ohm digital unit
IDC connection type unit
RJ45-24port digital unit
75ohm /RJ45 digiital unit
75ohm /120 ohm impedance conversion unit
20 E1 unit
16 E1 unit
8 E1 unit
10 E1 unit
Wire-wrap connection type unit
MPX286-4
MPX286-16
BNC connector
L9 connector
Impedance conversion unit
According to characteristic impedance
B-�0
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
By Installation Mode
19 inch installation mode
ETSI installation mode
19 inch installation mode dimension (The total height and space between installation hole at upright direction varies with different products)
ETSI installation mode dimension (The total height varies with different products, and the space between installation holes at upright direction will be redoubled by 25mm)
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
By Characteristic Impedance
75ohm digital unit
120ohm digital unit
Conversion digital unit
By coaxial connector 75 ohm digital unit can be classified into:
By capacity 75 ohm digital unit classified into:
8 E1 digital unit
10 E1 digital unit
16 E1 digital unit
20 E1 digital unit
L9 type coaxial connector BNC type coaxial connector
L9 type connector
BNC type coaxial connector
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
8 E1 digital unit
Application and FeaturesThe unit can be turned 90° outwards, facilitating
temporary cables reconnection and patch;
Full front access;
Model Application Remark
FS-1
• L9(1.6/5.6) coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames• Applicable to other 19 inch installation frames(cabinets) • Cable head is not included
• H×W×D =2U×483×69;• Installation height:3U
FBNC-1
• BNC coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames• Applicable to other 19 inch installation frames(cabinets)
FSM600-1• L9(1.6/5.6) coaxial connector • Applicable to MPX272-CM600/FM600 series • H×W×D=230×160×63mm
• Installation space 30mmFM600BNC-1
• BNC coaxial connector • Applicable to MPX272-CM600/FM600 series
MPX272-SM5• L9 coaxial connector • Applicable to MPX272-R4/R5/R6 narrow frames • H×W×D=155×180×10mm
• D=60 (connector included) MPX272-SM5BNC-1
• BNC coaxial connector • Applicable to MPX272-R4/R5/R6 narrow frames
FS-1/E• L9(1.6/5.6) coaxial connector • Applicable to ETSI standard frame (cabinets)
• H×W×D=2U×532×69mm
FBNC-1/E• BNC coaxial connector • ETSI installation mode standard frame (cabinets)
FS-1 / FBNC-1 digital unit
The test port at foreside of connector is convenient for
on-line test and self-loop test;
Standard products are L9(1.6/5.6) type connector and
BNC connector; other type connectors available if
required.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
FSM600-1/FM600 BNC-1 digital unit
MPX272-SM5/ MPX272-SM5BNC-1 digital unit
FS-1/E digital unit
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
Model Application Remark
FS-2
• L9(1.6/5.6) coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames• Applicable to other 19 inch installation frames (cabinets) • H×W×D=2U×483×69mm
• Installation height 3U
FBNC-2
• BNC coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames • Applicable to other 19 inch installation frames (cabinets)
FSM600-2• L9(1.6/5.6) coaxial connector• Applicable to MPX272-CM600/FM600 • H×W×D=230×160×63mm
• Installation space 30mmFM600BNC-2
• BNC coaxial connector • Applicable to MPX272-CM600/FM600
FS-2/E• L9(1.6/5.6) coaxial connector • ETSI installation mode • H×W×D=2U×532×69
• Installation space 3U FBNC-2/E
• BNC coaxial connector • ETSI installation mode
10 E1 digital unit
Application and FeaturesThe unit can be turned 90° outwards, facilitating
temporary cables reconnection and patch;
Full front access;
The test port at foreside of connector is convenient for
the on-line test and self-loop test;
Standard products are L9(1.6/5.6) type connector and
BNC connector; other type connectors available if
required.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
FS-2 / FBNC-2 digital unit
FSM600-2/FM600 BNC-2 digital unit
FS-2/E digital unit
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
Model Application Product specification and
installation dimension
FBNC-3
• BNC coaxial connector• Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames• Applicable to other 19 inch installation frames (cabinets)
• H×W×D=3U×482×69mm• Installation height 4U• The test port at foreside of
connector is convenient for the on-line test and self-loop testFSM800-3
• L9 coaxial connector• Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames• Applicable to other 19 inch installation frames (cabinets)
FSM800-3/E• L9(1.6/5.6) coaxial connector • Applicable to ETSI standard cabinets
• H×W×D=3U×532×69mm• Installation height 4U• The test port at foreside of
connector is convenient for the on-line test and self-loop test
FR/16-L9 • Direct connection structure• H×W×D=110×482×96 • Set 1U installation space apart
FBNC-3/E• BNC coaxial connector • ETSI installation mode
• H×W×D=3U×532×69mm• Installation height 4U
16 E1 digital unit
Application and featuresThe unit can be turned 90° outwards, facilitating
temporary cables reconnection and patch;
Full front access;
Standard products are L9(1.6/5.6) type connector and
BNC connector; other type connectors available if
required.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
FR/16-L9 digital unit
FSM800-3/E digital unit
FSM800-3 / FBNC-3 digital unit
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
Model Application Remarks
FBNC-4
• BNC coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames • Applicable to other 19 inch installation frames(cabinets) • H×W×D=3U×482×69mm
• Installation height: 4U
FSM800-4
• L9 coaxial connector • Applicable to MPX272F/CM800 series and MPX272 F series
single-sided and double-sided frames • Applicable to other 19 inch installation frames (cabinets)
FSM800-4B• L9 coaxial connector • ETSI standard installation
• H×W×D=3U×532×69mm• Installation height: 4U
FBNC-4/E• BNC coaxial connector • ETSI installation mode
• H×W×D=3U×532×69mm• Installation height: 4U
FSM800-4 / FBNC-4 digital unit
FSM800-4B digital unit
20 E1 digital unit
Application and featuresThe unit can be turned 90° outwards, facilitating
temporary cables reconnection and patch;
Full front access;
The test port at foreside of connector is convenient for
the on-line test and self-loop test;
Standard products are L9(1.6/5.6) type connector and
BNC connector; other type connectors available if
required.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
IDC-connection type digital unit
Wire-wrapping-connection type digital unit
MPX286-16 (IDC-connection type)
Main features
Adopt “Insulation Displacement Connection “ technology;
Test cord and patch cord are provided for cord patching,
on-line test and self-loop test;
Capacity:16 E1
Model Application Remarks
MPX286-16 Applicable to MPX286 IDC-connection type DDF H×W×D=125×114×80mm
By Connection Mode 120ohm Digital Unit Classified into:
120ohm IDC-connection type digital unit
B-�0
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
MPX286-4 (IDC-connection type)
Main featuresAdopt “Insulation Displacement Connection “
technology;
Test cord and patch cord are provided for
cord patching, on-line test and self-loop test;
Capacity: 4 E1
120ohm wire-wrapping connection type digital unit — RF/120
Model Application Remarks
MPX286-4Applicable to MPX286
IDC-connection type DDFH×W×D=39.1×114×80mm
Model Application Remarks
RF/120
• Direct connection capacity 64 E1 • Cross connection capacity:32 E1• Applicable to MPX286 wire-
wrapping-connection type DDF
H×W×D=4U×482×55 mm;1U space for cabling rack
Main featuresWire-wrapping connection type structure
with strong anti-pull-out force;
The data pins and grounding pins are glided
and silver-gilt respectively to distinguish from
each other;
Low contact and terminal resistance is
convenient for multiple-connection and test;
19 inch structure with large capacity and
high density.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
FS75/120-1/ FS75/120-2
Conversion Digital Uni
Main featuresThe unit adopts L9 coaxial connectors at 75 ohm side,
corresponding to terminal holders at 120 ohm side one-
to-one;
The unit can be turned 90° outwards;
Full front access;
The test port at foreside of connector is convenient for
on-line test and self-loop test;
The maximum capacity is 8 E1.
FS75/120-1 conversion digital unit FS75/120-2 conversion digital unit
Model Capacity E1 Remarks
FS75/120-1 8H×W×D=3U×482×69mm;height is 3U, installation space is 4U
FS75/120-2 10H×W×D=3U×482×69mm;height is 3U, installation space is 4U
FS75/120-1/E 8H×W×D=3U×532×69mm;height is 3U, installation space is 4U
FS75/120-2/E 10H×W×D=3U×532×69mm;height is 3U, installation space is 4U
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
FS75/120-1-BNC FS75/120-2-BNC
Main featuresThe unit adopts BNC coaxial connectors at 75 ohm side,
corresponding to terminal holders at 120 ohm side one-
to-one;
The unit can be turned 90° outwards;
Full front access;
Bayonet connection mode which is convenient for fast
connection and separation of coaxial socket and plug,
as well as easing the on-site distribution, patching and
conversion;
The test port at foreside of connector is convenient for
on-line test and self-loop test.
FS75/120-1-BNC conversion digital unit FS75/120-2-BNC conversion digital unit
Model Capacity E1 Remarks
FS75/120-1-BNC 8H×W×D=3U×482×69mm; height is 3U, installation space is 4U
FS75/120-2-BNC 10H×W×D=3U×482×69mm; height is 3U, installation space is 4U
FS75/120-1-BNC/E 8H×W×D=3U×532×69mm; height is 3U, installation space is 4U
FS75/120-2-BNC/E 10H×W×D=3U×532×69mm; height is 3U, installation space is 4U
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
75ohm/RJ45
Main featuresThe unit adopts L9 coaxial connector at 75 ohm side,
corresponding to RJ45 network port-sockets at the other
side one-to-one;
The unit can be turned 90° outwards;
Full front access;
The maximum capacity of unit is 16 ports.
Model Capacity E1 Remarks
75ohm/RJ45 16 H×W×D=3U×482×69mNo tool kit configured separately
75ohm/RJ45/E 16 H×W×D=3U×532×69m
RJ45-24
Main featuresThe unit adopts IDC-connection at inside, at outside is
RJ45 network port socket corresponding to each other;
IDC contact is tin-phosphorus bronze material and gild;
it has low contact and termination resistance and is
convenient for connecting and testing;
19 inch installation mode is the defaulted one, and ETSI
installation mode can be customized;
The maximum capacity of unit is 24 ports.
Model Description Remarks
RJ45-24 RJ45-24-24 ports distribution frame H×W×D=1U×482×35 mm
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
MPX272-2
75ohm 2 E1 Digital Unit
Main features2 E1 75ohm unit;
L9(1.6/5.6) coaxial connector;
The test port at foreside of connector is convenient for
on-line test and self-loop test.
Model Description Remarks
MPX272-2Compatible installation mode with JPX658;Mounted on installation rod
W×D×H=123.2×70× 72mm
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
MPX272-2X/MPX272-2X-BNC
Main features2 E1 75ohm unit;
The test port at foreside of connector is convenient for on-
line test and self-loop test.
Model Description Remarks
MPX272-2X L9(1.6/5.6) type coaxial connector W×D×H=150×48×76.2 mm
MPX272-2X-BNC BNC type coaxial connector W×D×H=150×48×76.2 mm
120 ohm 2 E1 Digital Unit
Main featuresIDC contact is tin-phosphorus bronze material and gild; it has low contact and termination resistance and is convenient
for connecting and testing;
Test cord and patch cord are provided for cord patching, on-line test and self-loop test.
B-��
Digital Unit Product SeriesDDF Product Series Digital Unit Product SeriesDDF Product Series
MPX286-2
MPX286-2X
Model Domensions W×D×H mm Remarks
MPX286-2 123.2×92×15 Installed on mounting rod
MPX286-2X 150×84×15 Installed on mounting strip
B-��
DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series
DDF Surge Protection Product Series
120ohm Surge Protective Unit ..........................................................................................................B-39
MPX286-FLDY ........................................................................................................................................B-39
Digital Surge Protective Box-75ohm .................................................................................................B-40
16E1-FL/ 8E1-FL ......................................................................................................................................B-40
8 E1-120ohm Surge Protective Unit ..................................................................................................B-41
8E1-MPX286-FL ......................................................................................................................................B-41
Contents
B-��
DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series
MPX286-FLDY
120ohm Surge Protective Unit
Performance indexThrough-current capacity of lightning (8/20us): for
differential mode is 5kA, for common mode is 8kA;
Bandwidth: ≥20MHz;
Transmission rate:16Mbit/s;
Voltage protection level: for differential mode ≤25V, for
common mode ≤25V;
Insertion loss: ≤0.3dB (50kHz—3.1MHz).
Model Dimensions (L× W× H) mm Application Weight (kg)
MPX286-FLDY 75.8× 19× 11Used with 120ohm digital unit MPX286-16 used in DDF
0.05
B-��
DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series
16E1-FL/ 8E1-FL
Digital Surge Protective Box-75ohm
Performance indexFull front access;
Compatible 19” installation mode with ETSI installation
mode;
SMB type coaxial connector with gilded surface for
lower contact resistance, so as to obtain maximum data
transmission capacity;
Characteristic impedance:75ohm;
Through-current capacity of lightning (8/20us): for
differential mode is 5kA, for common mode is 8kA;
Bandwidth: ≥20MHz;
Transmission rate:10Mbit/s;
Voltage protection level: for differential mode ≤25V, for
common mode ≤ 25V;
Insertion loss: ≤0.3dB (50kHz—3.1MHz).
16E1 Digital Surge Protective Box 8E1 Digital Surge Protective Box
Model Dimensions (L× W× H) mm Application Weight (kg)
16E1-FL 482.6 ×252× 2UUsed with OC-600/800;Maximum capacity:16-port
2
8E1-FL 482.6× 252× 2UUsed with OC-600/800;Maximum capacity:8-port
1.5
B-�0
DDF Surge Protection Product SeriesDDF Product Series DDF Surge Protection Product SeriesDDF Product Series
8E1-MPX286-FL
8 E1-120ohm Surge Protective Unit
Performance indexProviding 120ohm 8E1 DDF module of IDC-connection
type;
Implement surge protection function by the front-plug-in
120ohm surge protection unit;
Installation space is reserved for expanding module: by
installation of 2PCS of MPX286-4 (4E1) module, the full
configuration is up to 16E1;
Prepositive-type grounding bus bar, compatible with the
installation mode of North-American standard installation
terminal;
19” installation mode.
Model Dimensions (L× W× H) mm Application Weight (kg)
8E1-MPX286-FL 482.6× 252× 2U 8 E1 120ohm DDF unit 2
B-��
Digital Distribution Box & Transmission Interface BoxDDF Product Series Digital Distribution Box & Transmission Interface BoxDDF Product Series Digital Distribution Box & Transmission Interface BoxDDF Product Series
Digital Distribution Box & Transmission Interface Box
BTS Digital Distribution Box ..............................................................................................................B-43
DDF-BOX1 ..............................................................................................................................................B-43
DDF-BOX2 ..............................................................................................................................................B-43
Outdoor Power Supply Interface Box ................................................................................................B-44
PSI ..........................................................................................................................................................B-44
Contents
B-��
Digital Distribution Box & Transmission Interface BoxDDF Product Series Digital Distribution Box & Transmission Interface BoxDDF Product Series
DDF-BOX1
BTS Digital Distribution Box
Product featuresThe product is composed of cabinet, 75 ohm digital unit,
grounding bus bar, ID table and 24-channel expending
alarm connector (optional);
Wall-mounted type;
Unit capacity: 4 E1, can be extended to 6 E1 ;
Connector type: SMB type coaxial connector, characteristic
impedance of which is 75ohm.
Product featuresThe product is composed of cabinet, 120 ohm digital unit,
grounding bus bar, ID table and 24-channel expending
alarm connector (optional);
Wall-mounted type;
Unit capacity: 8 E1
Model Specification (W×
H× D) mmDescription
Weight (kg)
DDF-BOX1 335×230×115BTS digital distribution box (75ohm)
2
DDF-BOX2
Model Specification (W×
H× D) mmDescription
Weight (kg)
DDF-BOX2 335×230×115BTS digital distribution box (120ohm)
2
B-��
Digital Distribution Box & Transmission Interface BoxDDF Product Series Digital Distribution Box & Transmission Interface BoxDDF Product Series DDF Tool KitDDF Product Series
PSI
Product featuresShell of box is made of stainless steel;
Protection level: IP65;
wall-mounted type;
Provide air-breaker for the mains, connecting terminal block,
and interlock of oil engine air-breaker and air-breakers, etc.
Model Specification (W× H× D) mm Description Weight (kg)
PSI 420× 320× 124 Outdoor type accessory device of BTS3806A 10
Outdoor Power Supply Interface Box
B-��
Digital Distribution Box & Transmission Interface BoxDDF Product Series DDF Tool KitDDF Product Series
DDF Tool Kit
Model Description and application Remarks
MPX286-GJB
Tool kit for 120 ohm DDF:
including 2 pcs of patch cords (5m), 1 pcs on-line test cord (5m), 1 pcs disconnecting cord (5m), one IDC tool (diameter 0.32~0.6mm).
10 pcs disconnecting plugs for each module
MPX272-GJB
Tool kit for MPX272 DDF:
(wire stripper, crimping plier, cord)
Including one crimping plier, one wire stripper, one test cord and one patch cord.
For MPX272 DDF with L9 connector
MPX272-BNCGJBTool kit for MPX272 DDF:
Including wire stripper, crimping plier and cords.
For MPX272 DDF with BNC connector
MPX286-XF-GJB
Tool kit for MPX286-XF DDF- maintenance tools:
including two patch cords, one test cord, one wrapping gun, one line remover.
MPX286-RF-GJB
Tool kit for MPX286-RF DDF:
including one wrapping gun, two three meters test cords, two three patch cords, two loop plugs.
MPX286/272-GJB
Tool kit for 120ohm/75ohm impedance conversion unit in MPX286/272 DDF:
including wire stripper, crimping plier, cords, f lathead screwdriver.
For L9 connector
MPX286/272-GJB-BNC
Tool kit for 120ohm/75ohm impedance conversion unit in MPX286/272 DDF:
including wire stripper, crimping plier, cords, f lathead screwdriver.
For BNC connector
B-��
DDF Tool KitDDF Product Series DDF Tool KitDDF Product Series Mounting Board SeriesDDF Product Series
Wire stripper Crimping plier IDC tool
Wrapping gun Connection tool for RJ45 module Line remover for wrapping- connection module
Testing cord for 120 ohm IDC connection type digital unit
Testing cord for 120 ohm IDC connection type digital unit
Patch cord for 120 ohm IDC connection type digital unit
Test cord for 75ohm unit Patch cord for 75ohm-L9 unit Patch cord for 75ohm-BNC unit
Loop plug for wrapping-connection type module
Patch cord for wrapping-connection type module
Test cord for wrapping-connection type module
B-��
DDF Tool KitDDF Product Series Mounting Board SeriesDDF Product Series
Mounting Board Series
16 E1 Mounting board .....................................................................................................................B-48
MPX286-16AZB-1 ...................................................................................................................................B-48
MPX286-16AZB-2 ...................................................................................................................................B-48
MPX286-16AZB-3 ...................................................................................................................................B-49
I-2/E ........................................................................................................................................................B-49
II-4/E .......................................................................................................................................................B-50
Application instance .........................................................................................................................B-50
Contents
B-��
Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series
MPX286-16AZB-1
Product featuresMaterial: cold-rolled steel sheet of 2.0mm;
Structure: #-shaped fabricated structure;
Surface processing: plastic sprayed, Huawei grey;
19” installation mode.
16 E1 Mounting board
MPX286-16AZB-2
Product featuresMaterial: cold-rolled steel sheet of 2.0mm;
Structure: #-shaped fabricated structure;
Surface processing: plastic sprayed, Huawei grey;
19” installation mode.
Model Specification (W× D× H)
mmApplication
Weight (kg)
MPX286-16AZB-1 482.6× 130× 138.1Applicable to ZPX321;Holding 2 pcs 16 E1 module
1.5
Model Specification (W× D× H)
mmApplication
Weight (kg)
MPX286-16AZB-2 482.6× 130× 271.5 Holding 4pcs 16 E1 module 2.2
B-��
Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series
MPX286-16AZB-3
Product featuresMaterial: cold-rolled steel sheet of 2.0mm;
Structure: #-shaped fabricated structure;
Surface processing: plastic sprayed, Huawei grey;
19” installation mode.
ModelSpecifications (W× D× H)
mmApplication
Weight (kg)
MPX286-16AZB-3 482.6× 130× 404.8Applicable to ZPX321;Holding 6 pcs 16 E1 module
3.0
I-2/E
Product featuresMaterial: cold-rolled steel sheet of 2.0mm;
Structure: #-shaped fabricated structure;
Surface processing: plastic sprayed, Huawei grey;
ETSI installation mode.
Model Specifications (W× D× H) mm Application Weight (kg)
I-2/E 532.6× 130× 149.2 Holding 2pcs 16 E1 module 2.0
B-��
Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series
II-4/E
Product featuresMaterial: cold-rolled steel sheet of 2.0mm;
Structure: #-shaped fabricated structure;
Surface processing: plastic sprayed, Huawei grey;
ETSI installation mode.
Model Specification (W× D× H) mm Application Weight (kg)
II-4/E 532.6× 130× 274.2 Holding 4pcs 16 E1 module 2.5
Application instance
MPX286-16 Cable side terminal block
mounting board19" mounting pole
Exchange side terminal block
B-�0
DDF Product Series Cables Used in DDF
Mounting Board SeriesDDF Product Series Mounting Board SeriesDDF Product Series
Cables Used in DDF
SN Code Description
1 Cable1-6877 Single cable-grounding cable-5m-(OT10-6) -(227IEC02-10^2 Yellow-Green)-(OT10-6!)
2 Cable1-6878 Single cable-grounding cable-10m-(OT10-6) -(227IEC02-10^2Yellow-Green) -(OT10-6!)
3 Cable1-6879 Single cable-grounding cable-15m-(OT10-6) -(227IEC02-10^2Yellow-Green) -(OT10-6!)
4 Cable1-6880 Single cable-grounding cable-20m-(OT10-6)-(227IEC02-10^2Yellow-Green) -(OT10-6!)
5 Cable1-6881 Single cable-grounding cable-25m-(OT10-6)-(227IEC02-10^2Yellow-Green)-(OT10-6!)
6 Cable1-6882 Single cable-grounding cable-30m-(OT10-6) -(227IEC02-10^2Yellow-Green) -(OT10-6!)
7 Cable1-6883 Single cable-grounding cable-40m-(OT10-6) -(227IEC02-10^2Yellow-Green) -(OT10-6!)
8 Cable1-6884 Single cable-grounding cable-50m-(OT10-6) -(227IEC02-10^2Yellow-Green) -(OT10-6!)
9 Cable2-0499Cable -600V/1000V-ZRA VV-25mm2-Yellow-Green -98A-duplex sheath- With a package exempted from fumigating
10 Cable2-0515Cable -1000V/600V-ZRA VV-50mm2-Yellow-Green-145A- duplex sheath- With a package exempted from fumigating
11 Cable3-0014Twisted-pair cable-100Ω- Category 5e-0.51mm-24AWG-8 core-PANTONE 445U-with connector14080082
12 Cable3-0044 Communication cable-120Ω shielded twisted pair-1/0.5-2-core-outerdiameter 3.8mm
13 Cable3-0051 Cable -300/300V-AVVR4core, twisted pair 7/0.15mm with sheath,color: red/white/blue/green
14 Cable3-0073 Communication cable-120Ω-SEYFVP-26AWG-1pair-PANTONE War Grey 1U
15 Cable3-0075 Twisted pair cable-120Ω-SEYPVPV-0.4mm-26AWG-16core-PANTONE 430U- for OEM
16 Cable3-0076 Twisted pair cable-120Ω-SEYPVPV-0.4mm-26AWG-32 core-PANTONE 430U- for OEM
17 Cable4-0005 Coaxial cable-solid core-75Ω-3.4mm-2.1mm-0.34mm-Huawei white
18 Cable4-0009 Coaxial cable-SYV-50-7-1-7/ϕ diameter of single inner conductor 0.76- outer diameter 10.2mm
19 Cable4-0017 Coaxial cable-smooth copper tube-50Ω-28mm-22.2mm-9mm-black
20 Cable4-0034Coaxial cable-SYV-75-2-2(4.0Z)-1/0.34mm- outer diameter3.9mm- Double-Layer Copper Braid Shielded
21 Cable4-0076Coaxial cable- Aluminium Wire with copper-clad-50Ω-13.5mm-8.7mm-3.55mm-black-flexible1/2” jumper
22 Cable4-0098 Coaxial cable-SYFVZ-75-1-1(A)-75Ω-2.2mm-1.2mm-0.254mm-PANTONE WARM GREY 1U- for OEM
23 Cable3-0049 Communication cable-120Ω twisted pair-grey-8 pair cable-Φ0.4mm- unshielded
24 Cable3-0053 Communication cable-12 twisted pairs-26AWG-shielded
25 Cable3-0067 Twisted-pair cable-120ohm-SEYPVPV-0.5mm-24AWG-8 core-PANTONE 430 U
26 Cable3-0068 Twisted-pair cable-120ohm-SEYPVPV-0.5mm-24AWG-16 core-PANTONE 430 U
27 Cable3-0069 Twisted-pair cable-120ohm-SEYPVPV-0.5mm-24AWG-32 core-PANTONE 430 U
28 Cable3-0074 Twisted-pair cable-120ohm-SEYPVPV-0.4mm-26AWG-8 core-PANTONE 430U
29 Cable3-0162 Twisted-pair cable-120ohm-SEYPVPV-0.4mm-24AWG-64 core-PANTONE 430U
30 Cable4-0023 Coaxial cable-SYV-75-2-1-8 cables-outer diameter 12.5mm
B-��
DDF Product Series Cables Used in DDF
DDF Product Series
Cable Heads Used in DDF
SN Code Description
31 Cable4-0047 Coaxial cable-solid cor-75Ω-4.6mm-2.1mm-0.34mm
32 Cable4-0091Coaxial cable-SYFVVP-75-1-1x8-75ohm-8.4mm-1.05mm-0.25mm-PANTONE Warm Gray 1U-shilded 8-core coaxial,foaming PE insulation
33 Cable4-0099 Coaxial cable-SYFVZP-75-1-1*4(A)-75ohm-8mm-1.2mm-0.254mm-PANTONE WARM GREY 1U
34 Cable4-0100 Coaxial cable-SYFVZP-75-1-1*32(A)-75ohm-18mm-1.2mm-0.254mm-PANTONE WARM GREY 1U
35 Cable4-0107 Coaxial cable-SYFVZ-75-1-1*16(A)-75ohm-12mm-1.2mm-0.254mm-PANTONE WARM GREY 1U
SN Code Description
1 Connector-0133 Coaxial connector-BNC crimping cable Plug-75Ω/Straight/Male- use withSYV-75-2-1
2 Connector-0185 RF Coaxial connector-L9-75Ω-cable head-Male-use with SFYZ-75-2-1cable
3 Connector-0186 RF Coaxial connector-L9-75Ω-Straight/ Plug-Male-matching SYV-7SYV-75-2-1cable
4 Connector-0187 RF Coaxial connector-L9-75Ω-Straight/ Plug-Male-SYV-75-2-2
5 Connector-0188 Coaxial connector-L9-75J3-4-cable head (matching SYV-75-3cable)
6 Connector-0196Coaxial connector-BNC Plug-75Ω-Straight/Male-matching SFYZ-75-2-1- With heat shrink tube with itself
7 Connector-0208 RF Coaxial connector-L9-75Ω-Straight/ Plug-Male- clear indication about cable size should be given
8 Connector-0213 Coaxial connector-BNC-75Ω-Straight/ Plug-Male-matching SYV-75-2-2
9 Connector-0285 RF Coaxial connector-BNC-75Ω-Straight/Adapter- Dual Female-Thread panel installation type
10 Connector-0327 RF Coaxial connector-L9-75Ω-Straight plug-Male-matching SYFV-75-1-1
11 Connector-0358 RF Coaxial connector-BNC-75Ω- Plug/Straight-Male- With heat shrink tube with itself
12 Connector-0411RF Coaxial connector-BNC-75ohm-Straight plug-Male-matching cableSYFVZ-75-1-1- With heat shrink tube with itself
13 Connector-0381 RF Coaxial connector-L9-75Ω-Straight plug-Male-matching cable SYFVZ-75-1.2/0.25*8
14 Connector-0057 Coaxial connector-BNC Plug-75Ω/Straight/Male-matching RG59
B-��
Cable Heads Used in DDF
HUAWEI TECHNOLOGIES CO., LTD.
Add: Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R.China
Tel: +86-755-28780808
www.huawei.com
Copyright © 2007 Huawei Technologies Co., Ltd.
All Rights Reserved.
The information contained in this document is for reference purpose only, and is subject to change or withdrawal according to specific customer requirements and conditions.