View
2
Download
0
Category
Preview:
Citation preview
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de
TRUMPF LASERCELL TLC 1005
2
MACHINE INFO
Manufacturer
Type
Year of manufacture
Control
Machine number
Laser
Laser beam on
with CNC rotary axis/rotary table for tube machining
Working area
TRUMPF LASERCELL TLC 1005 | | 2
C axis (Rotational movement at Z) Rotary range n x 360° B axis (swivel movement at Y) Swivel range +- 120° Machine basic body -welded one-piece frame, performed as a welded construction „Flying optics“ with 3 CNC controlled linear axes X, Y, Z and digital AC drives Travel range: X axis: 3.000 mm Y axis: 1.500 mm Z axis: 500 mm Control panel
CNC control SIEMENS SINUMERIK 840 D designed for 6 axes. Communication interface integrated in the control cabinet laser control. Pedestal with side table shelf, drawers and keyboard. Floppy drive 3 ½‘‘ integrated in the control panel 5-axis transformation Teach-Panel Processing head for laser cutting
Lens optics, focal length 5‘‘-HD up to 20 bar (CO2) Contactless distance control Processing head for laser welding
Mirror optics of focal length 200 mm for CO2 –Laser (performed as 90°-parabolic optics) incl. protective gas guidance, collision avoidance and cross-Jet. Execution of optics recording as a removable adapter for manual exchange of the machining head for selectively cutting and welding applications.
EQUIPMENT
| 3 TRUMPF LASERCELL TLC 1005 |
TRUMPF CO2-Laser, TLF 4000 TURBO
High frequency excitation CO2-Laser of the TLF series in a compact design Cooling unit designed in water / air version for ambient temperature 10-35°C for laser and machine. Adjusting laser Laser control option -Power cycles / function generator -Laser power control -Log files with data acquisition Safety device
Cleaning device (with 1.500 m3/h), designed to filter during laser cutting or laser welding of suspending metals, attached to the cutting table Closed safety cabin (3D) to a complete encapsulation of the machine in 3D mode, consisting of Makrolon and sheet metal elements with front sliding door incl. cabin roof, safety-technical and maintenance door lock Additional hinged doors Extension of the safety cabin through a manually operated lateral hinged door Lighting set Work area lighting on the protection cabin with light at Y-boom Working station
Work table with grate designed as leaf support incl. coupling of the suction unit for sequential control of the individual suction chambers. Recording ability of devices on the periphery of the worktable via defined dowel holes with fastening thread. Table-bearing surface Y direction = 1.500 mm X direction = 3.000 mm Table variant Manual slide on guide rails in the foundation
| 4 TRUMPF LASERCELL TLC 1005 |
Rotary axis
The table surface of the rotary shaft has a diameter of 400 mm. Different recording units can be connected through the defined hole pattern with threaded holes. Rotary table with CNC rotary axis on a set of rails horizontally on the machine body, parallel to the X axis, movable (approx. 1,2 mm) Counter bearing, consisting of: -Base plate fot the connection of the counter bearing or customer specific device – or movable. - Rail set on the machine body for the manual movement of the base plate of the counter bearing, parallel to the X axis with bearing support and clamping unit, outside the working area right under the bottom Extension piece
Installation of an extension piece between Z sleeve and laser welding head to increase the offset. The use of the extension is only possible with the welding head for welding linear seams without rotation of the B and C axis.
| 5 TRUMPF LASERCELL TLC 1005 |
Coordinate system
TECHNICAL DATA
Working area X axis
Y axis
Z axis
C axis
B axis
A axis ( rotary table) Max. travel area X axis
Y axis
Z axis Max. working height Max. axes speed X axis
Y axis
Z axis
C axis
B axis
A axis ( rotary table) Rotary table Max. envelope diameter
Max. axial loading
Diameter of the turning table with a defined thread hole grid
| 6 TRUMPF LASERCELL TLC 1005 |
| 7
Counter bearing Stroke
Cylinder force at 5 bar TRUMPF CNC control SIEMENS SINUMERIK 840 D
Hard disc space
Disk drive
Platform
Colour monitor Laser Type
Performance variants
Frequency modulation Turning axis Diameter
Axial loading
Max. speed
Rotary table
TRUMPF LASERCELL TLC 1005 |
| 8 TRUMPF LASERCELL TLC 1005 |
Turning axis
| 9 TRUMPF LASERCELL TLC 1005 |
| 10 TRUMPF LASERCELL TLC 1005 |
Welding head
MACHINE PICTURES
| 11 TRUMPF LASERCELL TLC 1005 |
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Recommended