Manual for titan mouse

Manual l titanum mouse

2

1

4

3

6

5

Manual l titanum mouse

Bluetooth

Batteries

Description l

l

l

Description

1

right click button

scroll roll button

left clickbutton

Description

2

connectbutton

lense

battery cover

radio button

Batteries

3

Batteries

4

Bluetooth

5

radio button

connect buttonpress

on

At this point you need to set up a connection between the mouse and your computer. Depending on your software version , the following steps are generally required;

• Click on the 'Windows Start' button. Click on 'Control Panel'.• Now click on 'Printers and Other Hardware' Click on 'Bluetooth devices'. With in this menu click on 'Add' .

• Turn the mouse on and press the 'connect'button on the bottom side of the mouse.• Now you need to check the radio button 'My device is setup and ready to be found' and click on the 'Next' button.

6

Bluetooth

on

• The mouse will appear in the list of found devices. Please select the mouse and click on the 'Next' button to install the mouse.• Select the option 'Don't use a passkey'. Once the mouse has been successfully installed, you can close the wizard.

Installation completeThis concludes the installation ; you can nowstart using your Titanium Mouse. When yourcomputer restarts, or after you turn off themouse, you do not need to repeat the abovesteps.

Romana Hladká l 2010