USER MANUAL- TITAN 1785

1

Quick Start Guide Watch Charger USB cable

What’s in the box

2

Pairing the watch for the first time:Once you get your watch, charge your watch with the included charger.The watch will vibrate twice and the offset hand will start moving, whichindicates the watch has been activated. Post this, Bluetooth will remainON at all times.

Getting started

3

Installing the Watch AppPlease download the “Titan Connected" app from theGoogle Play Store or the Apple App Store.

Pairing the Watch with the AppOpen the App and follow the on-screen instructions.Select “Titan 1785” and then select the Watch variant.You will be taken to the pairing screen.Click on ‘start pairing’ and the phone will begin searching for the watch.

Note: It is recommended to keep the watch close to the phone during thepairing process. Your phone's Bluetooth& Location should be on to pair the watch

Looking for your watch

Looking for your watch...

A

4

Finding your watch

Once the watch is found, the App will display the same. Select thewatch and click on ‘Start Pairing’ to complete the pairing process.

B

Pair your Smartwatch

Select a watch to pair

Titan_1785_1AD2 CD:72:E4:16;1A:D2

START PAIRING

5

Pairing Successful

Once the watch is successfully paired, Tap ‘Next’ to continue

Pair your Smartwatch

Watch is successfully paired!

NEXT

6

In the calibration page, align the hourhand in the App to match the hour handon the watch. Tap ‘Next’ when completeand the hour hand will move to the 12Hposition and the App will move to the‘Minute Hand Calibration’ page

Calibration of WatchCalibration of Hour handA

NEXT

Hour Hand

Calibrate

7

Align the minute hand position in theApp to match the minute hand on thewatch. Tap ‘Next’ when complete andthe minute hand will move to the 12Hposition and the App will move to the‘Offset Second Hand Calobration’ page

Calibration of WatchCalibration of Minute handB

NEXT

Minute Hand

Calibrate

8

Calibration of WatchCalibration of Offset Second hand

Align the offset second hand in the Appto match the offset second hand on thewatch. Tap ‘Next’ when complete andthe offset second hand will move to the12H position and the App will move tothe ‘Minor Adjustment’ page

C

NEXT

Offset Second Hand

Calibrate

9

‘Minor Adjustment’ of all hands

In case the hands are not alignedexactly to 12H, please make minoradjustments for the hands as required.

Click ‘Next’ to complete the calibrationprocess and the watch hands will moveto the current time.

Note:Once syncing is done, if the time isinaccurate, please use the ‘Calibrate’feature on the app to correct the same.

Calibration of WatchD

NEXT

Make sure all watch handsare set to 12H

Minute Hand

Hour Hand

Offset Hand

Use or buttonsfor minor adjustments

Calibrate

10

Features

CallNotifications

2nd City Time

AutoTime Sync

Day Date Find Your Phone

Link LostAlert

MeetingReminder

SedentaryReminder

ActivityTracker

1. Press the 3H push button onceand Offset hand will show the progressof activity in percentage

2. Activity completion percentage will beIndicated on the offset dial

3. Once you achieve your steps target(100%), the hour hand and minute handwill move together to celebrateyour achievement.

11

Activity Tracker

1. Press the 3H push button two timesconsecutively and Offset hand will Showthe Day & Date mode

2. The Date and Time is automatically takenfrom The mobile and displayed by the centerhands (Hour & Minute)

3. Minute hand indicates the Date and Hourhand indicates the Day

4. Feature will be displayed for 5 seconds

12

Day/Date

Secondary Time Zone1. Press the 3H push button three timesconsecutively and the offset hand willshow the secondary time zone mode

2. Pre-set second city time is taken fromthe mobile app and will be displayedon the watch

3. Feature will be displayed for 5 seconds

13

Note:Select a second city from ‘Second Time Zone’option in the app

Find Your Phone

3 sec

1. Press the 3H push button for 3 seconds(continuously), ‘Find My Phone’ feature getsenabled and phone starts ringing with blinkof flash light.

2. To stop the ‘Find my Phone’ feature,press 3H push button again for 3 seconds

14

Connected nowPhone FoundHey buddy I am here! Note:

This feature will work only after you enablethe ‘Phone Finder’ option in the app.

10:45Friday, November 24

Link LossIn case the watch loses connection withthe smartphone, the Offset second handwill point towards the ‘Link Loss’ iconand the watch will vibrate twice.

15

Sedentary ReminderFor a particular sedentary interval set inthe Mobile App, the watch vibrates andthe Offset second hand will point to the‘Sedentary Reminder’ icon if it doesn’tsense movement after the set interval.

16

Note:Enable ‘Sedentary Reminder’ feature andset the interval time from the mobile app‘Notification’ section.

Call NotificationIn case of incoming calls, the watch vibratesto indicate the same & the Offset second handwill point to the call notification icon

For the ‘Priority Calls’ set in the mobile App,the hour and minute hand points to the orderof the priority set in the App, e.g. Priority ofa certain number is set to 2, in case of call,both hour and minute hands would point todigit 2.

17

Note:Enable ‘Call Notification’ featureand set the ‘Priority Contacts’from the mobile app ‘Notification’section.

Meeting ReminderThe watch will sync to the native calendarapp and vibrate 10 mins before the meetingstart time with the offset hand showingthe ‘Meeting Reminder’ mode.

18

Product Specifications

19

Instructions for useRecommended temperature range when using this smart watch: 0-55°C Please do not use this smart watch when showering, in the sauna or other areas where it will be exposed to hot water or steam so as to prevent it from being damaged.Please do not put the watch in areas with a strong magnetic field, such as near magnets.

Case

Dimension Case Material Glass MaterialStrap

Watch Movement SensorsConnectionFeedback

Titan Micro motorAccelerometerBluetooth LE 4.0Vibrator

Battery LifeBattery typeBattery Capacity

5 Days (Full Smart) + 45 Days (Normal Watch)Li Ion Polymer60 mAh

44 X 13 mm316 Stainless steelMineral GlassGenuine Leather / Metal Strap

Movement & Sensor Information

Battery

Water Resistance Rating 5ATM/50m

20

ComponentName

Lead(Pb)

Mercury(Hg)

Cadmium(Cd)

HexavalentChromium

(Cr(Vl))

PolybrominatedBiphenyls (PBB)

PolybrominatedDiphenyl Ethers

(PBDE)

PCBA Board

Outer Casing

Metal

Battery

X

0

X

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

The table was prepared pursuant to the provisions of SJ/T 11364.0: Indicates that the content of all the hazardous substances in the homogeneous materials of this part is below the limit requirements specified by GB/T 26572.X: Indicates that the content of all the hazardous substances in the homogeneous material of this part exceeds the limit requirements specified by GB/T 26572. The information provided in this table is based on the data provided by the suppliers At current technology levels, the use of all hazardous substances is controlled to the minimum.

The product complies with ROHS requirements for environment protection. Currently there is no mature technology globally to replace or reduce the lead content in electronic ceramic, optical glass, steel and copper alloy.

The green lifespan - Environmental protection lifespan of the product is 10 years, and the label is shown in the figure on the left. The green lifespan for a replaceable part such as the battery may be different from that of the product. The green lifespan is valid only when using the product under normal circumstances described in the manual.

Disclaimer: Titan Company Limited has the right of final interpretation of this manual.

Hazardous / Toxic Substances / Elements

21

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC Statement

22

Max RF power level:BLE(2402-2480MHz)-5.2dBm

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=0 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a Ocm distance between the device and human body.

Hereby, Titan Company Limited declares that the radio equipment type (Smartwatch 90099, 90099SL01, 90099SL02)is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:http://www.titanworld.com/in-en/

CE Statement

23

Activity trackers are intended to be tools to provide you with information to encourage an active and healthy lifestyle.Activity trackers rely on sensors that track your movement and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including the step, sleep, distance, and calorie data. Activity trackers are designed to track repetitive walking motions as steps. Arm movement while walking will be captured by the internal accelerometer of the device, and will record each complete swing of the arm as two steps.

Note - Accurate user data (height) information provides better accuracy. Some activities may cause frequent arm movement resulting in the device recording too many steps:● Driving a vehicle (usually due to rough terrain)● A restless night of sleep

There are also instances where a lack of arm movement may result in a loss of steps while you are walking:● Pushing a stroller or shopping cart● Carrying a bag of groceries or child● Talking on phone and walking

Activity trackers are not medical devices, and the data provided by them is not intended to be utilized for medical purposes and is not intended to diagnose, treat, cure, or prevent any disease. We recommend you consult your doctor before engaging in any exercise routine.

Note on the accuracy of Activity Tracker