Upload
itma-materials-technology
View
190
Download
0
Embed Size (px)
Citation preview
From research to Industry
Research
Development
Innovation
Massive production
Materials
Product
Process
Industry
We create value for industry
Promoting scientific
research and technology
development activities of
interest for our clients.
Contributing to enhance and develop
the industrial environment by using
applied technology to materials as
strategic instrument for improving
competitiveness
Set up in 6 Research Areas directly related to Industry needs
R&D&I Projects
Development of new materials, products & processes
Technology Services
• Design of steels and alloys
• Design of thermal and thermomechanical treatments
• Selection of Materials
Development of Metallic Materials
• Selection of Materials and Coatings
• Surface behaviour at extreme conditions
• In-service behaviour studies
Surface Integrity and Corrosion
• Structural and Material behaviour
• Dynamic/Static – Low/High T Mechanical Characterization
• Failure Analysis. In-Use Life Analysis
• Welding and Joining techniques
Structural Mechanics
Steel and Metallurgy Area
• Shaped, unshaped, dense, insulation mat.
• Design, mechanization, characterization
• Post-mortem studies & R&D Projects
Refractories (Materials for high T)
• Technical Ceramics for Industrial Application
• Nanopowder-based functional materials
• Synthetized on demand
• Mechanical characterization at high T
Ceramics
• Characterization
• Waste & Raw Materials Recovery
• Concrete, cement and additives
• Thermal insulation materials
Raw Materials & Construction Mat.
Ceramics, Refractories & Raw Materials Area
• Functional Nano-oxides
• Graphene % carbon nanotubes by CVD
• Nanowires (Ag, Fe, Co…)
Synthesis of nanostructures
Graphene & Nanotubes Functionalization
• Alternatives to ITO
• Via sol-gel
• Spray
Development of Functional Coatings
Processing & functionalization of polymeric materials
Nanotechnology Area
• 3D Modelling
• Model meshing
• Export of geometry for FEM
Parametric Design
• Structural Analysis
• Thermal Analysis
• Coupled Analysis
Finite Elements Method (FEM)
• Environmental solutions
• Particle drag
• Industry Process Simulation
CFD Analysis
Engineering / Simulation Area
• Microcrystalline, amorphous and tandem junctions of silicon structures
• Design and deposition over different substrates
• Architectural Integration
• PVD, PECVD, laser scribing and encapsulation
Thin Film Photovoltaics
• Luminescent Solar Concentrators
• Photonic Systems of spectral conversion
• Perovskites
Emerging Technologies
• Materials with electromagnetical properties
• Materials with advanced optical properties
• Design and synthesis of photovoltaic dyes
Advanced Materials
Photonics Area
• Capacitive
• Resistive
• Multitouch screens & tables
Sensors
• Quality control, 3D metrology
• Detection, recognition and monitoring by images
3D Artificial Vision
• Internet of things
• Advanced controls (light, presence, etc.)
• Smart textiles
• Wireless communication at long distances
Smart systems
Electronics Area
• Mechanization
• Mechanical Tests (tensile, folding, resilience…)
• Special Tests (Disbonding, Weight Drop…)
• Homologation of welding/welders procedures
Structural Integrity
• Metallic alloys, pure metals, ferric alloys
• Refractories, Raw Materials
• In-situ tests
Chemical Analysis
• Regulatory Metrology Control
• Metrology Management & Calibration Plans
• Certified by competent authority (ENAC)
Legal & voluntary Metrology
Technological Services Area
Active presence at networks and technology platforms
We are aware of the market trends, about technology innovation related to
materials and its application to different areas
In addition to our Technological Services, technical assistances and projects
working directly with our clients, ITMA Foundation has wide experience in preparing
collaborative proposals at regional, national and European level.
Experience in R&D&i Collaboration
FP7– European Commission. Consortium led by ITMA. Innovation via
integrating ETFE material with PV, LED and electronic control elements, then
developing a multifunctional flexible construction module.
Experience in R&D&i Collaboration: FP7 ETFE-MFM
Budget: 3,2 M€
Partners:
www.etfe-mfm.eu
RFCS – European Commission. Consortium led by ITMA. Compatibility of
industrial quality steels as substrates for photovoltaic modules.
Experience in R&D&i Collaboration: SteelPV
Budget: 2,2 M€
Partners:
www.steelpv.eu
FP7– European Commission. Consortium led by TREELOGIC.
Integration of technological solutions for imaging, detection and digitalization of
hidden elements in artworks.
Experience in R&D&i Collaboration: FP7 INSIDDE
Budget: 4,8 M€
Partners:
www.insidde-fp7.eu
RFCS – European Commission. Consortium led by ArcelorMittal España, S.A,
Modular simulation tool for predicting in-use behaviour of water refrigeration
systems in steelmaking industry
Experience in R&D&i Collaboration: RFCS - MODELCOR
Budget: 1,2 M€
Partners:
Experience in R&D&i Collaboration: RED WELDS
MANUNET – European Commission. Consortium led by Tuinsa Norte, S.A.
Rapid evaluation of distortions in welding structures.
Budget: 0,68 M€
Partners:
PROJECT CONSORTIUM
HTD-LOW-NI
Development of a new alloy for tube manufacturing for direct reduction applications,
with highly competitive performance-cost ratio in the global market
Project Total Budget 1,1 M€
Retos Programme – MINECO (2014-2017)
1 Company,
1 Research body.
Led by Schmidt and
Clemens, S.A.
TH@SOL
Advanced concrete tanks for solar storage
Project Total Budget 1,1 M€
Retos Programme – MINECO (2015-2017)
1 Company,
2 Research Bodies.
Led by Abengoa Research,
S.L.
SOLBAN
Development of an advanced welding procedures of new carbide free bainitic steels for
rail
Project Total Budget 0,9 M€
Retos Programme – MINECO (2015-2018)
1 Company,
2 Research Bodies.
Led by ArcelorMittal
Supporting large research industry consortia
PROJECT CONSORTIUM
RECO2VERY
CO2 emissions recovery from waste incineration plant and use for microalgae
production
Project Total Budget 0,9 M€
Retos Programme – MINECO (2014-2017)
3 Companies,
3 Research Bodies.
Led by Ingeniería de
Manutención Asturiana,
S.A.
AQUADREN+
New developments on tunnel drainage systems based on smart gunning and advanced
projection technology
Project Total Budget 0,9 M€
Retos Programme – MINECO (2015-2017)
3 Companies,
2 Research Bodies.
Led by Cementos Tudela
Veguín, S.A.
ALIENA
Innovative Storage at Stationary Application, based on Aluminium
Project Total Budget 0,8 M€
Retos Programme – MINECO (2015-2018)
3 Companies,
2 Research bodies.
Led by Albufera Energy
Storage, S.L.
Supporting large research industry consortia
PROJECT CONSORTIUM
RETINETA
Development of luminescent nanomaterials for neuroprotection and nano-therapy of eye-
related pathologies in a retina damaged by light experimental model
Project Total Budget 0,3 M€
Retos Programme – MINECO (2014-2016)
1 Company,
2 Research Bodies.
Led by Instituto Oftalmológico
Fernández Vega, S.L.
GRACE
Functionality analysis of different laminar raw materials and application methods as
coating for Steel flat product
Project Total Budget 0,56 M€
Asturias Regional Funds (2014-2015)
2 Companies,
1 Research Body.
Led by ARCELORMITTAL
Innovación, Investigación e
Inversión, S.L.
Supporting large research industry consortia
PROJECT CONSORTIUM
SIPS
Research on the definition at pilot scale of the product-mix for future world-class
steelmaking plants
Project Total Budget 1,11 M€
Asturias Regional Funds (2014-2016)
4 Companies,
1 Research Body.
Led by ARCELORMITTAL
Innovación, Investigación e
Inversión, S.L.
Supporting large research industry consortia
Maximum quality of our work
and recognition of our customers
Others:
ENAC Accreditations
Standard UNE-EN ISO 17025:2005
AENOR certifications
Standard UNE-EN ISO
9001:2008
Standard UNE166002:2006
In the Legal Metrology Area, ITMA is appointed as:
Authorized entity by the Asturias Regional Government to perform the test foreseen in the Legal Metrological Control
(Res. From June 19th, 2000).
Authorized entity Nº 1270, acknowledged by the European Commission, to perform CE verifications on weighting
devices, needed for their commissioning.
Mechanical tests, chemical tests and macrographic examinations of metallic
materials(60/LE154).
Mechanical and chemical tests of refractories and raw materials (60/LE483).
Metallic barriers tests of containment of vehicles, the accessories and other
elements of galvanized steel (60/LE1138).
Calibration in temperature area(86/LC162).
Calibration in pressure area(86/LC163).
Calibration in electricity cc and low-frequency area(86/LC285).
Calibration in dimensional area(86/LC402).
Calibration in mechanical-force area(86/LC463).
Calibration in mechanical-mass area(86/LC489).
UNE-EN ISO 9001:2008
“Quality management
systems - Requirements“.
UNE 166002:2006
“R&D&i Management System
- Requirements“.
ITMA in figures
Year 2014
Total Active 17.448.394 €
Total Own Funds 7.418.857 €
Total Incomes from Activities 7.365.326 €
Public Funding 37%
Competitive 19%
Non-competitive (operational costs) 3%
Non-competitive (Investments) 15%
Private Funding 63%
Number of R&D&i Projects 40
Number of Clients 1.417
Number of Technical Assistances 505
Number of Technological Services 6.393
Our Team
DEGREE MEN WOMEN TOTAL
Ph.D. 12 (11%) 8 (7%) 20
Higher Education Graduates 15 (14%) 23 (21%) 38
Technical Staff 5 (5%) 4 (4%) 9
Laboratory assistants and auxiliaries 30 (27%) 14 (13%) 44
TOTAL 62 (56%) 49 (44%) 111
Its value lies in:
Highly skilled staff Commitment to its objectives
Proximity to the customer Thoroughness in its work
Our facilities
ITMA Centre in Aviles
Laboratories: 1.575 m2
Industrial warehouse: 1.326 m2
Offices: 1.789 m2
Total: 4.690 m2
ITMA Centre in Llanera
Laboratories: 1.533 m2
Industrial warehouse : 539 m2
Offices: 1.646 m2
Total: 3.718 m2
Thank you for your attention
Contact:
Phone: +34 985 129 120