Work and Energy
Objectives1. The student will investigate and understand
the interrelationships among mass, distance, force and time through mathematical and experimental process. Key concepts include work, power and energy (PH.5 g)
2. The student will understand that energy is conserved (PH.6a)
3. The student will investigate and understand that energy can be transferred and transformed to provide usable work. (PH.8a,b)
WorkWork is the force necessary to
move an object a distance.
WorkNeed to know!
Work = Force x distance moved
(If the force is in the same direction as the displacement)
Unit of WorkNeed to Know
Work is measured in newton-meters. A special name is given to this unit:
Joule (J) = 1 Newton-meter
Work is a scalar NOT a vector
“Working” outA man benches 585 lb (245 kg)The distance from his chest to theTop of the lift is 0.75 m. Find thework done by the teacher for one rep (up and down)Known: Distance (d) = 0.75 mweight lifted = mg = 245kg x 9.8m/s2
Fy = may
FLift - mg = 0FLift = mg = (245 kg)(9.8 m/s2)
= 2403 NWLift = FLiftd = (2403 N)(0.75 m) = 1802.5 J(continued)
mgd
.5FL.5FL
“Working” out (cont.)FLower - mg = 0FLower = mg = (245 kg)(9.8 m/s2)
= 2403 NWLower = FLowerd = (2403 N)(-0.75 m) = -1802.5 J
Total Work = WLift + WLower Total Work = 1802.5 J + (-1802.5 J)Total Work = 0 J
mgd
.5FL.5FL
What is the unit of work?
1. Newton2. Meter3. Joule4. Newton meter5. 3 and 4
How much work is necessary to lift 10 kg 5m in the air?
1. 10 N2. 50 J3. 490 J4. 4900 J
10 kg
5 m
Recall• If we applied a force to an object• Work = Force x Distance• Previously in our examples, the force
aligned with the distance
Force
Distance
Force
BUT, what happens if the force and the distance are ….
NOT in the Same Direction
Distance
Force Force
If this is the case• We must use the component of the
force in the direction of the displacement
F F
displacement
ӨFcosӨ
Work = Force x Distance x cosӨNeed to Know
Bottom Line
• You can always use the equationWork = (Force)(Distance)(cosӨ)
W=FdcosӨ• Even if the Force is parallel to the
displacementForce
Displacement
Ө = 0o Cos0o = 1
Work Done by a Constant ForceNeed to Know
• Work: the product of the magnitude of the displacement times the component of the force parallel to the displacement
W = FdcosWhere F is the magnitude of the constant
force, d is the magnitude of the displacement of the object, and is the angle between the directions of the force and the displacement
Graphical Analysis of WorkNeed to Know
• We can generate a graph of force versus distance. For a constant force,
Fapplied
F, W=Fxd N Area=LxW
Distance, m x We can determine amount of work by calculating the
area of the force-distance rectangle.
Graphical Analysis of WorkNeed to Know
• Force is not always constant, but we can determine the work by calculating the area under the Force-distance curve: F, W= (1/2)Fxd N Area=(1/2) base x height
Distance, m
Problem Solving Techniques1. FBD: Sketch the system and show the force that
is doing the work (as well as others that may be involved)
2. Choose an x-y coordinate system - direction of motion should be one
3. Determine the force that is doing the work4. Find the angle between the force doing the work
and the displacement 5. Find the work done: W=(Force)(distance)cos
d = 40m
Fp Fp
Example: Work done on a crate
Fp = 100 N = 37 degDetermine the work done by the force acting on the
crateWp = Fpdcos = (100 N)(40 m)(cos37) = 3200J
d = 40m
Fp Fp
PowerNeed to know
• Power is the rate at which work is doneP = average power
= work/time = W/tUnit: Watt(w) = Joule/sec (J/s)
Power Example: Running StairsA 70 kg student runs up a flight of stairs in 4.0s. The
vertical height of the stairs is 4.5 m. Estimate the student’s power output in watts
Know: mass = 70 kg; time = 4.0 s; y = 4.5 mThe work is done against gravity:W= Force x distance; where force = mgAnd distance equals vertical distance yWork = (mass) x (gravity) x (y)W = (70 kg)(9.8m/s2)(4.5m)W = 3087 Joules (J)P = Work/timeP = 3087 J/ 4.0 sP = 772 W (Recall 746 W = 1hp) = 1.03 hp
mg
y = 4.5
How much power is required to lift 10 kg, 5 m in the air in 10 s?
10 kg
5 m
1. 49 w2. 490 J3. 490 w4. 4900 w
Power Example: Bench PressIf a teacher benches 245 kg (weight = mg = 2405N) 0.75 m ten
times in 25 seconds, estimate the power in his chest and arms
The teacher moves the weight (Force required = mg = 2405N) a total distance of 7.5 m (0.75m x 10) so
Work (W) = (Force) x (distance) x (#repetitions)(Assume no work done bringing weight down)
Work = (2405 N)(0.75 M)(10)W = 18,038 Joules (J)
Power = Work/timeP = (18,038J)/(25 s)
P = 721 W