WWW.VARDHMANBERARINGS.COM
WWW.ARIHANTENGINEERS.COM
We at vardhman bearings are authorize dealer of JANATICS PNEUMATICS ..products , janatics air cylinders , janatics pneumatic cylinders , janatics directional control valves , janatics compact valves D S 2, janatics manually operated valves D S 2 , janatics panel mounting valves , janatics manual & mechanical valves , janatics solenoid valves J series , janatics solenoid valves DP1 series , janatics solenoid connectors , janatics 3/2 direct acting NC values -17 mm , janatics 3/2 direct acting NC valves – 22 mm , janatics airline valves , janatics air preparation units , janatics pneumatics accessories , janatics pneumatics systems , janatics air preparation units NPT , janatics directional control valves unit NPT ,
Janatics > Janatics Pneumatics Automation
Janatics Pneumatics has been established and manufacturing since more than three decades and have their manufacturing plant based in Coimbatore – India. Janatics Pneumatics is an engineering focussed pneumatic automation company that have been providing Janatics Pneumatics quality pneumatic products and expertise to the Indian market for over thirty years. Janatics Pneumatics is one of the major Manufacturers of Components for Pneumatics and Factory Automation.
Beginning with air preparation units ( Frl ), moving on to air management devices such as Pneumatic manual and solenoid operated valves direct acting valves and finally through to Pneumatic actuators, Pneumatic-Cylinders and handling equipment, Janatics Pneumatics cylinder, valve, & frl dealers & distributors can always offer the right products.
Spares for Janatics Pneumatics products such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair kit & service kit, solenoid coils & connectors, auto drain, diaphragms, silencers, flow control & quick exhaust valves, hose pipes, pu tubings & push-in one touch fittings are available with the dealers, distributors & stockists for immediate sales,repair & service for Standard & Large Bore Cylinders for Iso 6431 A12, A13 series, Iso 15552 A27, A28, A25, A26 series, Vdma 24562 A23, A24, A63, A64 magnetic & nonmagnetic type series, Compact Cylinders A02, A03 series, Solenoid-Valves & Coils for J, Dp1, Ds2 series & Modular Air Preparation Units (Frls) for ¼”, ½”, ¾” & 1” Bsp sizes and other models also.
Janatics Pneumatics has poppet valve, solenoid valve, cylinder & frl dealers & distributors network spread over Lower Parel, Dadar, Mahim, Andheri, Goregaon, Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Daman, Boisar, Dahanu Road & outside Mumbai – India.
Also Janatics Pneumatics valve, cylinder & frl dealers & distributors are very prominent all over Maharashtra as in Pune, Kolhapur, Nashik and other locations in India like Gujarat, Surat, Ahmedabad, Bangalore, Vizag, Indore, Nashik, Nagpur, Ludhiana, Chandigarh, Ernakulum, Hydrebad, Vadodara, Rajkot, Delhi, Chennai, & Kolkata.
Janatics Pneumatics – Janatics Range of Pneumatic Products Include:-
Janatics Pneumatic Compressed Air Preparation >Janatics Air Filter, Pressure Regulator & Oil Lubricator, Frl combinations & individual units for compressed modular air preparation ( Frl ). Available in ¼, 3/8, ½, ¾, 1” Bsp pipe connections and more.
Janatics Pneumatic Drives >Standard Single & Double Acting Cylinders in Compact | Round | Miniature | Short Stroke & Rodless types conforming to Iso 6432, 15552, 21287 Vdma 24562 available in A12, A13 A27, A28, A25, A26 A23, A24 A63, A64, A02, A03 series in magnetic & nonmagnetic types.
Janatics Pu Tubings > Pipes, Low & High Pressure Hoses, Janatics Pu (Polyurethane), Nylon, Polyamide Od, Id, Spiral Tube.
Janatics Pneumatic Fittings >Push-in One Touch fittings in Elbow, Tee, Straight, Y types for m5, 1/8, ¼, 3/8, ½, ¾, & 1 Inch Bsp sizes / Barbed Fittings / Threaded Fittings also Blanking, Bulk Head Connectors & Plugs.
Janatics Pneumatic Valves - Pneumatics >Standard pneumatic and universal directional valves > Solenoid & mechanically actuated valves in Ds2 & J series in 3/2, 5/2, 5/3 No / Nc types | Poppet Valves in Dp1 series in 3/2 & 5/2 types | Solenoid Connectors in Ka, Kb,& Kc series in 32, 22 & 17 mm sizes | Direct Acting Valve in 3/2 & 2/2 Normally closed and open types – 17mm & 22mm in Ac / Dc Voltages| shut-off valves | pressure-limiting valves and proportional valves.
Janatics Pneumatic Manual Valves >Flow Control Valves in Gr & Gr2 series | Quick Exhaust Valve in Gq series | Inline Slide Valve in Gs1 series | Non Return Valve in Gv1 series | Roller Lever Valves | Hand Lever Valve in Ds2 series in different pipe connections.
Janatics Pneumatics Solenoid Coils & Accessories > Janatics Solenoid Explosion Coils & Connectors in Ac & Dc Voltages | Janatics Solenoid Armature Set for poppet & solenoid valve.
Janatics Pneumatics Silencers, Guages & Air Guns >Janatics Silencers | Janatics Air Guns & Blower Nozzels | Janatics Pressure Guages for modular air preparation units(frl).
Janatics > Janatics Pneumatics > Dealer & Distributor Mumbai - India
Vardhman bearings is one of the largest dealer & distributor located in Andheri – Mumbai - India having a wide range of Janatics Pneumatics products. We give free technical advice related to Janatics pneumatic products and provide immediate repair & service within Mumbai – India on Janatics Pneumatics products such as poppet valves, Solenoid-Valves, direct acting valve, flow control quick exhaust valve,cylinders and modular air preparation units (frl) for all models. We are market leaders in Janatics Pneumatics factory automation and pneumatic systems providing immediate sales & repair services in Lower Parel, Dadar, Mahim, Andheri, Goregaon, Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Daman, Boisar, Dahanu Road & outside Mumbai – India.
Vardhman bearings has also got a good prescence in the International Market and support OEMs and After Sales Dealers Distributors and Export their goods to countries like Afghanistan Albania Algeria Antarctica Argentina Australia Austria Bahamas Bangladesh Barbados Belgium Bermuda Bhutan Bolivia Botswana Brazil Brunei Bulgeria Cambodia Camaroon Canada Chile China Congo Colombia Costa Rica Cuba Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Ethiopia Fiji Islands Finland France Georgia Germany Greece Greenland Guinea Hungary Indonesia Iran Iraq Ireland Israel Italy Jamaica Japan Jordan Kazaksthan Kenya Korea Kuwait Lebanon Liberia Luxembourg Libya Malaysia Maldives Mauritius Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nepal Netherlands New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal Qatar Romania Russia Saudi Arabia Singapore Slovania Somalia South Africa South Georgia Spain Sri Lanka Sudan Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Tonga Turkey Uganda Ukraine United Arab Emirates United Kingdom United States Uruguay Uzbekistan Venezuela Vietnam Virgin Islands Yemen Yugoslavia Zambia Zimbabwe by Air And Sea Transport on FOB or CIF Trade Terms.
Vardhman bearings is always here to help you with all your pneumatic requirements and repair & services ranging from Janatics Pneumatics factory automation products and systems to component supply of Janatics Pneumatics Modular Air Filters, Regulators, Lubricators (Frl), Air Cylinders, Compact Cylinders, Poppet Valves, Flow Control Vavle, Solenoid-Valves, Pneumatic Pu One Touch Fittings & Tubings for most applications.
Also spares such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair & sevice kit, auto drain, solenoid coils,diaphragms, silencers, connectors, hose pipes, pu one touch tubings & fittings are available in stock for immediate repairing & servicing of Janatics pneumatics Iso 6431 Vdma 24562 standard and custom made Air Cylinders, Poppet Valves, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves & Modular Air Preparation Units (Frls) and other models.
Some of the popular products namely the Modular Air Filter Regulator Lubricator ( Frl ) series, Standard & Custom made Cylinders Compact Cylinders in Iso 6431 Vdma 24562 Series, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves, Solenoid Coils & Connectors in Ac / Dc Voltages are available in bulk stock. We offer the best competitive prices and discounts on bulk purchase of Janatics Pneumatics pneumatic products and fastest delivery options in and around Mumbai - India for all your Janatics Pneumatics pneumatic requirements.
Vardhman bearings also has an extensive range of other products like Electrical Temperature & Pressure Differential Switch and Ss Glycerine Filled Pressure Guages and of International Brands like Allen Bradley Siemens Omron Switzer Danfoss Indfoss Baumer Waree Orion Trafag Wika Fiebig etc. All the products are of international export quality and standards having international approvals and certifications from registered vendors which are mainly used in Process Industries like Petrochemicals Oil And Gas Fertilizers Cement and Steel Pharmaceuticals Beverages Food Dairy Pet And Water Treatment OEM & Maintenance Industries. We also deal in Magnetic Piston Filter Clogging Colour Band Indicators High Low Pressure Piston And Diaphragm Differential Dp Pressure Gauges Magnetic Float Switches Flow Switches Flame Proof Flp Switches etc.
About product range
Since 1977, Janatics has been consistently focusing on development of new products and has more than 17000 models in its range.
Flagship products like Air preparation units, Fittings and Valves has made Janatics to be the number one Indian pneumatic product manufacturer and had enabled to sprawl globally
Exports to over 25 countries which includes UK, USA, Mexico, Germany, Australia, Kuwait, South Africa, Italy, Saudi Arabia, Kenya,
Egypt etc., would vouchsafe the product quality
Product Gallery
Air Cylinders
View More..
Directional Control Valves
View More..
Air Line Valves
View More..
Air Preparation Units
View More..
Accessories
View More..
Pneumatic Systems
View More..
ISO 6431 (Tie rod)
As per ISO 6431 / CETOP RP43P, RP53P standards Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm Standard Cylinder - Series A12, A13 Double End Cylinder - Series A10, A11
ISO 15552 Tie rod (Ø32-100)
AS per ISO 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm ISO Standard Cylinder - Series A27, A28 Double End Cylinder - Series A25, A26
ISO 15552 Tie rod (Ø125-200)
As per 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø125, 160 & 200 mm ISO Standard Cylinder - Series A16, A17 Double End Cylinder - Series A18, A19
VDMA 24562 (Square profile)
As per ISO 15552 / VDMA 24562 standards Cylinder sizes: Ø32, 40, 50, 63, 80, 100 & 125 mm Air Cylinder (Square Type Profile) - Series A23, A24 Double End Cylinder - Series A20, A21
ISO 21287 (Ø25-100)
Compact ISO cylinders As per ISO 21287 standards Cylinder sizes: Ø25, 32, 40, 50, 63, 80 & 100 mm ISO Standard Cylinder - Series A63, A64 Double End Cylinder - Series A60, A61
Compact Cylinders
Compact Cylinder - Series A02 Compact Magnetic Cylinder - Series A03 Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm
ISO 6432 / CETOP RP52P
ISO Miniature Cylinders - Series A51, A52 Cylinder sizes: Ø12, 16, 20 & 25mm ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)
Air Cylinder Accessories
Air Cylinder Accessories Magnetic Sensors Reed switches Connector cables
Standard Cylinder A12, A13As per ISO 6431 / CETOP RP43P, RP53P standards
Adjustable cushioning at both ends Wide varieties of mountings Long life Magnetic and non magnetic versions
Double End Cylinder A10, A11Double Acting - Ø32-100 mm
Adjustable cushioning at both ends Wide variety of mountings Magnetic & Non Magnetic versions Long life
Vardhman bearings are dealers of janatics pneumatics products , janatics dealers , janatics stockiest , janatics pneumatics suppliers , janatics pneumatics manufacturers , janatics valves seal kit dealers , janatics pneumatics price list , janatics products dealers , janatics products manufacturers , janatics pneumatics in india , janatics pneumatics in Mumbai , janatics pneumatics in pune , janatics pneumatics in Maharashtra , janatics pneumatics in delhi , janatics pneumatics in Nagpur , janatics pneumatics in kolkatta , janatics pneumatics in banaglore , janatics pneumatics in Chennai , janatics pneumatics in hyderbad , janatics pneumatics in Coimbatore , janatics pneumatics in tamilnadu , janatics pneumatics in Punjab ,
Janatics Pneumatic ProductsWe are one of the leading organizations engaged in trading and distributing of wide range of Pneumatic products. We are engaged in distributing pneumatics
products manufactured by “Janatics Pneumatic:
Pneumatic Cylinder
SO 6431 (Tie rod)
As per ISO 6431 / CETOP RP43P, RP53P standards
Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm
Standard Cylinder - Series A12, A13
Double End Cylinder - Series A10, A11
ISO 15552 Tie rod (Ø125-200)
As per 15552 / VDMA 24562 standards (Barrel type)
Cylinder sizes: Ø126, 160 & 200 mm
ISO Standard Cylinder - Series A16, A17
Double End Cylinder - Series A18, A19
VDMA 24562 (Square profile)
As per ISO 15552 / VDMA 24562 standards
Cylinder sizes: Ø32, 40, 50, 63, 80, 100 & 125 mm
Air Cylinder (Square Type Profile) - Series A23, A24
Double End Cylinder - Series A20, A21
ISO 21287 (Ø25-100)
Compact ISO cylinders
As per ISO 21287 standards
Cylinder sizes: Ø25, 32, 40, 50, 63, 80 & 100 mm
ISO Standard Cylinder - Series A63, A64
Double End Cylinder - Series A60, A61
Compact Cylinders
Compact Cylinder - Series A02
Compact Magnetic Cylinder - Series A03
Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm
ISO 6432 / CETOP RP52P
ISO Miniature Cylinders - Series A51, A52
Cylinder sizes: Ø12, 16, 20 & 25mm
ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)
Vardhman bearings deal in janatics pneumatic products , janatics dealers , janatics stockiest , janatics valves , janatics hoses , janatics products ,
Pneumatic Directional Control Valves
Leveraging upon rich vendor base, we are trading and distributing pneumatic control valves. These are known for features
like long service life, low maintenance and corrosion resistance. Apart from this we traded different types of valves:
Solenoid Compact Valve DS2
Sizes: 1/8, 1/4 & 1/2
3/2, 5/2, 5/3 type available
Available for different standard coil voltages
Manifold mounting is possible
Solenoid Valves DP1 series
Size G1/4 - 3/2, 5/2
Diaphragm operated poppet seat
No lubrication required
Maintenance free
Wide range of coil voltages
Continuous duty cycle
Good flow characteristics
Coil can be rotated by 360°
Suitable for dirty / dusty environment
Solenoid Connectors
Series KA, KB, KC - (Solenoid Connectors 32mm, 22mm, 17mm)
Confirms to DIN 43650 standards
Central screw ensures vibration proof interlocking
Suitable for solenoid valves
Models available with transparent housing and indicator lamps
Connector with circuit to protect the source and load is available
Manually Operated Valves DS2
3/2, 5/2, 5/3 valves
Suitable for 8 bar - G1/8, 10 bar - G1/4, G1/2 air pressure
Mounting provision for individual unit
Suitable for panel mounting
Panel Mounting Valves
Panel Mounting Valve - G1/8
- Spool Design
- Mounting provision for individual unit
Panel Mounting Valve - M5
- Poppet design
- Mounting provision for individual un
Manual & Mechanical Valves
3/2 NO / NC & 5/2 versions
Suitable for 10 bar air pressure
Basic, Roller lever, Finger lever and Foot operated type available
Send Enquiry
Air Preparation Unit (FRL)
Filter
Filter with Manual Drain
Filter with Internal Auto Drain
Filter with Metal bowl
Mist Separator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Regulator with NRV
Lubricator
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Lubricator
Lubricator with Metal Bowl
Filter Regulator Combination
FRC with Manual Drain
FRC with Internal Auto Drain
FRC with Metal Bowl
Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRCL Modular
Filter Regulator Combination Lubricator with Modular
FRCLM without Piping Adopter
Sizes: G1/4, G3/8, G1/2, G3/4, G1
Send Enquiry
PU Tube & Push Fittings
One Touch Fittings
WP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)
Attractive design
Compact size
Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree
Full area of the inner bore of the tubing is available for flow of fluid
Bubble tight sealing of tubes
Suitable for both Nylon and PU tubing
Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap
New design Stainless steel collet
Teflon pre coated male taper threads
Maintenance free and long life
The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet
Polyurethane Tubes Coloured
WH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)
Provide differentiation of air line in pneumatic circuits
Polyurethane Coiled Tube
WHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)
Self retracting & space saving
Send Enquiry
Pneumatic Accessories
Air Blow Gun
WB series (Size G1/4)
Easy handling
Compact size
Attractive design
Good flow and characteristics
Junction box
WJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Wide range of models available
Aluminium anodized body
Mounting holes provided
Silencer
AS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Brass body and sintered bronze silencer elements
Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control (with spring) types
Good flow and silencing characteristics
Can be cleaned by kerosene and soap water
Tube Holder
WT series (Sizes Ø4, 6, 8, 10, 12mm)
Suitable for Nylon & Polyurethane tubes
One Touch FittingsWP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)
Attractive design Compact size Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree Full area of the inner bore of the tubing is available for flow of fluid Bubble tight sealing of tubes Suitable for both Nylon and PU tubing
Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap
New design Stainless steel collet Teflon pre coated male taper threads Maintenance free and long life The fitment and function of tubes are not affected by vibrations due to positive
gripping of the tube by the collet
Air Blow GunWB series (Size G1/4)
Easy handling Compact size Attractive design Good flow and characteristics
NipplesWN series (Sizes M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)
Wide variety of nipples available Nickel plated brass body Male (R) taper threads with thread sealant coating, Male parallel threads with sealing
washer (M5 only)
Junction boxWJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Wide range of models available Aluminium anodized body Mounting holes provided
SilencerAS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Brass body and sintered bronze silencer elements Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control
(with spring) types Good flow and silencing characteristics Can be cleaned by kerosene and soap water
Quick couplerWQ series (Sizes 1/4, 1/2)
Nickel plated brass body High flow characteristics Wide range of models Maintenance free and long life Compact size Attractive design
Polyurethane Tubes ColouredWH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)
Provide differentiation of air line in pneumatic circuits
Polyurethane Coiled TubeWHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)
Self retracting & space saving
Tube HolderWT series (Sizes Ø4, 6, 8, 10, 12mm)
Suitable for Nylon & Polyurethane tubes
His
Polyurethane Coiled Tube WHC series (Tube sizes: Ø4, 6, 8, 10, 12mm OD)
Polyurethane Tubes Coloured WH Series - Sizes: Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)
Quick coupler WQ series (Sizes : 1/4, 1/2)
Silencer AS series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)
Junction box WJ series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)
Nipples WN series (Sizes : M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)
Air Blow Gun WB series (Size: G1/4)
One Touch Fittings WP2 series (Sizes : Ø4, 6, 8, 10, 12, 14 and 16mm)
Filter
Filter with Manual Drain Filter with Internal Autodrain Filter with Metal bowl Mist Separator Sizes: G1/4, G3/8, G1/2, G3/4, G1
Regulator
Sizes: G1/4, G3/8, G1/2, G3/4, G1 Regulator Regulator with NRV
Lubricator
Sizes: G1/4, G3/8, G1/2, G3/4, G1 Lubricator Lubricator with Metalbowl
Filter Regulator Combination
FRC with Manual Drain FRC with Internal Autodrain FRC with Metalbowl Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRL Modular
Filter, Regulator, Lubricator with Modular FRLM without Piping Adopter Sizes: G1/4, G3/8, G1/2, G3/4, G1
FRCL Modular
Filter Regulator Combination Lubricator with Modular FRCLM without Piping Adopter Sizes: G1/4, G3/8, G1/2, G3/4, G1
Accessories
Modular Construction FRL Clamps Pressure Gauges Panel Mounting Pressure Gauges Auto Drain Valve
Shut Off ValveGS2 Series (Sizes G1/4, G3/8, G1/2)
Connecting thread at both ends Connection - G1/4, G3/8, G1/2 Modular mounting with FRL
Shut Off Valve LockableGS2 Series (Sizes G1/4, G3/8, G1/2)
Modular mounting with FRL Port thread at both ends Window display to show the valve position
• ( i.e.) the valve is in On condition or Off condition
Pressure SwitchPW series - Size R1/8
Quick response Easy adjustability of set pressure Hysteresis adjustable
Pressure Sensor - 2 outputsDigital Pressure Sensor (PS series) - Size R1/8
Set pressure selectable (Mpa, psi, kgf/cm2, bar) Both upper and lower limits of pressure can be set independently Panel mountable Direct mountable Both PNP & NPN versions Two outputs
Pressure Sensor - 1 outputDigital Pressure Sensor (Series PS - R1/8
2 Colours display (Red / Green) Set pressure selectable (kPa, psi, kgf/cm2, bar) Both upper and lower limits of pressure can be set independently Panel mountable Direct mountable Both PNP & NPN versions Single output
RegulatorR1 series - Sizes G1/4, G3/8, G1/2, 3/4, 1
Conform to ISO 6953 1 Suitable for panel and modular mountings Non raising Press to Lock adjusting knob for locking at any set pressure Diaphragm operated, relieving type Pressure compensated by balanced poppet Flow compensated in models R14, R15 and R17 (with venturi) for faster response Good flow and regulating characteristics
Regulator Built in NRVR1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2
Conform to ISO 6953 1 Suitable for panel and modular mountings Non raising Press to Lock adjusting knob for locking at any set pressure Diaphragm operated, relieving type Pressure compensated by balanced poppet Flow compensated in models R14 and R15 (with venturi) for faster response Good flow and regulating characteristics Built in non return valve allows free air flow in reverse direction. When the inlet air is
reduced by and below the setup pressure
Regulator Built in NRV R1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2
LubricatorL1 series - Sizes G1/4, G3/8, G1/2, G3/4, G1
Conform to ISO 6301-1 Suitable for Modular mounting Fog/Mist type Fine adjustment of lubrication Steel bowlguard, bayonet type on L14, L15 & L17 models and threaded type on L13
model Lubrication proportional to flow
Lubricator with MetalbowlL1M series - Sizes G1/4, G3/8, G1/2, G3/4, G1
For higher pressure range above 10 bar Suitable for Modular mounting Fog / mist type Fine adjustment of lubrication Aluminium bowl guard, bayonet type (3/4 and 1" only) Lubrication proportional to flow
Lubricator with Metalbowl L1M series - Sizes : G1/4, G3/8, G1/2, G3/4, G1
FRC with Manual drainFRC1 series - Sizes G1/4, 3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting Filter
• Bronze filtering element• Separator and shield for efficient moisture separation
Regulator• Diaphragm operated, relieving type• Pressure compensated by balanced poppet• Flow compensated in models FRC14, FRC15 and FRC17 for faster response• Non raising press to lock adjusting knob for locking at any set pressure
Steel bowl guard, bayonet type on FRC14, FRC15 & FRC17 models and threaded type on FRC13 model
Good flow and regulating characteristics
FRC with Internal AutodrainFRC1A series - Sizes G3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting Filter
• Bronze filtering element• Separator and shield for efficient moisture separation• Bayonet type steel bowl guard
Internal auto drain• Float type, no electrical connections required• Provided with manual drain• Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean
Regulator• Diaphragm operated, relieving type• Pressure compensated by balanced poppet• Flow compensated for faster response• Non raising Press to lock adjusting knob for locking at any set pressure
Good flow and regulating characteristics
FRC with Metal BowlFRC1M series - Sizes G1/4, 3/8, 1/2, 3/4, 1
Modular type Suitable for panel mounting Filter
• Bronze filtering element• Separator and shield for efficient moisture separation• Press type manual drain for easy operation• Suitable for automatic drain
Regulator• Diaphragm operated, relieving type• Pressure compensated by balanced poppet• Flow compensated• Non raising Press to lock adjusting knob
Aluminium bowl guard, bayonet type (3/4 and 1" only) Good flow and regulating characteristics
Flow Control ValveGR2 series (Sizes M5, 1/8, 1/4, 3/8, 1/2)
Directly mountable on cylinder/valve ports Can be rotated by 360 degree Fine regulation of air flow Nickel plated body Male threads(R) teflon coated Elegant design and finish
Flow Control Valve - MetalSeries GR - Sizes M5, 1/8, 1/4, 3/8, 1/2 (Metal type Flow control valves)
Directly mountable on cylinder / valve ports Fine regulation of air flow Male threads (G) with sealing washer Elegant design and finish Slotted head screw adjusting type
Flow control valve - Inline typeGR2 series (Sizes Ø4, 6, 8, 10 & 12mm)
Fine regulation of air flow Elegant design and finish Available sizes : Ø4, 6, 8, 10 & 12mm
Quick Exhaust ValveGQ series (Sizes M5, G1/8, G1/4, G3/8, G1/2)
Increase the speed of the cylinder With / without silencer Connection - M5, G1/8, G1/4, G3/8, G1/2 Type GQ01 series is with silencer to reduce the exhaust noise
Pilot operated Non-Return ValveGV2 series (Sizes G1/8, G1/4, G3/8, G1/2)
Available in two versions Low cracking and closing pressure Bubble tight - elastomer seat Plastic portion can be turned by 360° Teflon pre-coated male taper threads
Inline Slide ValveGS1 series (Sizes R1/8, R1/4, R3/8, R1/2, R3/4)
Inline mounted Sleeve type, saves space Smooth, easy operation
Non Return ValveGV1 series (Sizes G1/8, G1/4, G3/8, G1/2)
In line mounting Low cracking and closing pressure Bubble tight elastomer seat
AND ValveGA series (Sizes M5, G1/8, G1/4)
AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y)
If two signals of different pressure is applied, the lower pressure is connected to outlet (A).
OR ValveGB series (Sizes M5, G1/8, G1/4 )
OR valve delivers air at the outlet (A) always supplied by higher pressure (X or Y) If two signals of different pressure is applied, the higher pressure is connected to
outlet (A)
Shut Off Valve - Hand leverSeries GS3 - Hand lever operated ball valves - G1/4, 3/8, 1/2, 3/4, 1, 1¼, 1½, 2
Ball type In line mounting Easy and smooth operation Assembly on rigid pipe system Maintenance free Bubble tight sealing
Shut Off Valve - Knob typeSeries GS3 - Knob operated ball valves - G1/8, 1/4, 3/8, 1/2
Ball type In line mounting Easy and smooth operation Assembly on rigid pipe system Maintenance free Bubble tight sealing
Janatics complete product range in ready stock delivery from vardhman bearings
Janatics valves dealers , stockiest , importers , janatics pneumatic cylinder , janatics FRLS , janatics solenoid valves ,