Making a circuit board and components
Everything starts with making my own circuit board. I got
positive photoresist boards and made my own with a fluorescent
light. You need apositive developer, such as sodium metasilicate
pentahydrate. Then, I used Ammonium Persulfate in an etching tank
and agitator. The resultis below. If you need electronic parts,
Digikey and Mouser are good sources. There is always Ebay.
Induction Heater
http://inductionheatertutorial.com/inductionheater/induction11.html
1 of 3 5/25/2014 12:04 PM
