3
Making a circuit board and components Everything starts with making my own circuit board. I got positive photoresist boards and made my own with a fluorescent light. You need a positive developer, such as sodium metasilicate pentahydrate. Then, I used Ammonium Persulfate in an etching tank and agitator. The result is below. If you need electronic parts, Digikey and Mouser are good sources. There is always Ebay. Induction Heater http://inductionheatertutorial.com/inductionheater/induction11.html 1 of 3 5/25/2014 12:04 PM

Induction Heater14

Embed Size (px)

DESCRIPTION

Heater14

Citation preview

  • Making a circuit board and components

    Everything starts with making my own circuit board. I got positive photoresist boards and made my own with a fluorescent light. You need apositive developer, such as sodium metasilicate pentahydrate. Then, I used Ammonium Persulfate in an etching tank and agitator. The resultis below. If you need electronic parts, Digikey and Mouser are good sources. There is always Ebay.

    Induction Heater http://inductionheatertutorial.com/inductionheater/induction11.html

    1 of 3 5/25/2014 12:04 PM

  • Induction Heater http://inductionheatertutorial.com/inductionheater/induction11.html

    2 of 3 5/25/2014 12:04 PM

  • Induction Heater Levitation Coil and Tutorial

    Induction Heater http://inductionheatertutorial.com/inductionheater/induction11.html

    3 of 3 5/25/2014 12:04 PM