FuelFocus Radio Frequency Vehicle ID (RFID) Box
www.assetworks.com | 610.687.9202
The RF Vehicle ID Box is a vehicle mounted microprocessor that authorizes the use of the fuel dispenser. The RF Vehicle ID Box removes the human input element from a fuel transaction by automatically transmitting the vehicle ID number, odometer, and hour meter to the FuelFocus™ Controller – virtually eliminating all errors in data. A completed transaction will have: day, date, time, vehicle ID number, odometer reading, hour reading, gallons of fuel received, location and pump # and optionally employee ID. When used in conjunction with the FuelFocus Mobile Controller, you can also have a GPS location of the vehicle’s coordinates when fueled.
The RF Vehicle ID Box is a weatherproof unit that can be configured to count pulses on older model vehicles, or to obtain all the pertinent meter readings and diagnostic data directly from the engine computer. The FuelFocus RF Vehicle ID Box supports J1708 and J1939 for heavy duty equipment and J2284 (OBDII) for light duty vehicles.
Four types of RF Vehicle ID Boxes are currently available. Each RF Vehicle ID Box type supports up to two fuel inlet antenna rings for saddle tank applications. The RF Vehicle ID Box is powered by the vehicle’s battery and is initially configured by programming data into the units’ non volatile memory. All FuelFocus RF Vehicle ID Boxes also utilize flash technology for memory and upgrade capabilities for the future. See the chart below for a representative listing of data which can be captured from the engine computer. Please consult with your AssetWorks representative for a complete listing of diagnostic data available.
RF Vehicle ID TYPE OBDII J1939 J1708 Pulse
Odometer
Engine Hours
Fault Codes
Minimum Charging Voltage
Minimum Engine Oil Pressure
Maximum Engine RPM
Maximum Engine Speed
Engine Oil Level
PTO Time
Maximum Engine Temp
Stop Idle Time
Fuel Level
FuelFocus RF Vehicle ID Box, Antenna Cable and Antenna Mast
Copyright © 2013 AssetWorks
www.assetworks.com | 610.687.9202
FuelFocus Radio Frequency Vehicle ID (RFID) Box
For more information, contact an AssetWorks representative today at 610.687.9202 or visit us online at www.assetworks.com
998 Old Eagle School Road, Suite 1215 | Wayne, PA 19087
FuelFocus® FMS System
998 Old Eagle School Road, Suite 1215 | Wayne, Pennsylvania 19087 | T: 610.687.9202 | F: 610.971.9447 |www.assetworks.com
Vehicle Identification Box (VIB) With CAN Bus Interface
Ordering Info Description Part No. Generic CAN Bus VIB (RM915) #RID-M9A-GEN
Specifications
Mechanical
Dimensions: 5.48 x 2.64 x 2 in Antenna Length: 7 in Antenna cable Length: 60 in Weight: 0.94 lb.
Environmental & Standards
Operation Temperature: -50ºF to +130ºF FCC approved
Electrical
Power supply: 12VDC or 24VDC, 52mA Inputs: Power, Odometer, V-Coil, Embedded ID Transmitting output power: 0.06 Watt Transmitting frequency range: 914-928 MHz Frequency Modulation: Spread spectrum
J1939 , J2284&FORD Serial interface to vehicle computer Enables:
Odometer reading Engine hours reading Maintenance diagnostics (optional)
The VIB is a vehicle-mounted computer, which authorizes use of the dispenser. It contains the system and vehicle identification information, fuel type authorization, transaction limitation code, odometer, and engine-hours data. The VIB is setup initially by programming. The CAN bus interface protocol is used for real time data exchange between control units and commercial vehicles network. Each VIB type supports two tank antenna rings for saddle tank applications. The VIB gets its power from the vehicle's battery. The 1939, J2284 and FORD Protocols enables reading of odometer, engine hours and other data from light and heavy duty vehicles.
RF Vehicle ID Box Schematic
SpecificationsMechanical
• Dimensions: 5.48" x 2.64" x 2"
• Antenna Length: 7"
• Antenna cable Length: 60"
• Weight: 0.94 lb
Environmental & Standards
• Operation Temperature: -50ºF to +130ºF
• FCC approved
Electrical
• Power supply: 12VDC or 24VDC, 52mA
• Inputs: Power, Odometer, V-Coil, Embedded ID
• Transmitting output power: 0.06 Watt
• Transmitting frequency range: 914-928 MHz
• Frequency Modulation: Spread spectrum
• J1939 , J2284 & FORD Serial interface to vehicle computer enables:
• Odometer reading
• Engine hours reading
• Maintenance diagnostics (optional)
Description Part Number
RF Vehicle ID Box - Pulse RID-M9A-PUL
RF Vehicle ID Box - J1708 RID-M9A-J17
RF Vehicle ID Box WAF
Canbus Dual Input No PID
RID-M9A-GEN