Download pdf - Fluid System Products - bigbrandwater.com · Fluid System Products Fittings, Valves, ... please refer to our Chemical Compatibility Chart ... Threads BSP, BSPT & NPT

Fluid System ProductsFittings, Valves, Tubing

Industrial Division Catalog

John Guest USA, Inc.May 2008

INNOVATION FROM A WORLD LEADER

As the world’s leading manufacturer of push-in pipe fittings, John Guest has been pioneering revolutionary plastics manufacturing technologies since the early 1970’s.

Over the past 30 years, the company has established a worldwide reputation for product quality and service. John Guest’s precision engineering background and highly trained specialist workforce uniquely places the company as one that manufactures to the most stringent international standards. Our long-standing commitment to product innovation and development has resulted in a comprehensive range of award-winning fittings with substantial benefits for specifier, installer, and end user alike.

With production currently running at more than 150 million units per year, the success of the JG Speedfit® system proves the value of these benefits in practice. In addition to plumbing applications, John Guest fittings are specified as original equipment by many leading building products manufacturers and used extensively by market leaders in the water quality, automotive, compressed air, and brewing industries.

Quality components depend on quality machines and highly skilled staff. John Guest has both in abundance. A policy of re-investment in leading edge technologies has equipped the company with an advanced large-scale manufacturing capability which incorporates highly sophisticated process controls.

From the beginning, the company’s philosophy has been to employ the most capable people and to give them the best possible training. There are 1000 staff at the manufacturing facilities in the United Kingdom; another 200 people are located at John Guest companies in the USA, Korea, Germany, France, Spain, Italy, New Zealand, and Australia.

FOCUS ON RESEARCH AND DEVELOPMENT

As befits a company committed to innova-tion, more than 10% of the John Guest workforce is dedicat-ed to research and development.

In addition to on-site resources which in-clude the latest CAD/CAM technologies, extensive development work on a variety of projects is carried out in close conjunction with renowned universities both in the United Kingdom and abroad.

EXCELLENCE IN MANUFACTURING

Investment in new plant and equipment over recent years has made John Guest’s manu-facturing center one of the larg-est and best equipped of its kind in the world. High-capacity injection molding machines and assembly equipment are sup-ported by an in-house tool-room staffed by a highly trained team of qualified toolmakers.

ASSURED QUALITY

Every aspect of the company’s operation is characterized by the pursuit of total quality. Zero defect process controls are built into all design and manufacturing assembly processes to achieve optimum standards of long-term product reliability.

John Guest has been a BS EN ISO 9001 Registered Company since 1989 and has received awards and approvals for qual-ity manufacture from many leading inter-national companies and approvals orga-nizations.

11

Ind

ustrial P

rod

ucts

Table of Contents for Industrial Products

For Speedfit Inch Products refer to Table of Contents page 27For Speedfit Metric Products refer to Table of Contents page 37

Inch Size Fittings

PP Fittings White Polypropylene for use with a wide range of applications 4-5

PI Fittings Gray Acetal for liquids and inert gases 6-9

CI Fittings White Acetal for pure water and other potable liquids 10

Superseal Fittings Gray Acetal for use with stainless steel tube 11

MI Fittings Brass Fittings for beverage dispensing applications 12

Metric to Inch Size Fittings

Metric to Inch Fittings Converts metric sizes to inch and inch to metric 12

Metric Size Fittings

PPM Fittings White Polypropylene for use with a wide range of applications 19

PM Fittings Black Acetal for liquids and inert gases 20-22

Valves, LLDPE Tubing and Accessories

Check Valves Single Check Valves in inch sizes 9

Angle Stop Adapter Valves White Polypropylene in inch sizes 13

Angle Tee Adapter Valves White Acetal in metric to inch sizes 14

Shut-Off Valves White Polypropylene and Gray Acetal 14

LLDPE Tubing Linear Low Density Polyethylene in Inch and metric sizes 18

Accessories Collet Covers, Tube Inserts, Clips, Tools 23 and Cutters (inch and metic sizes)

Half Cartridges

Plastic Cartridges Inch CTS Sizes 15 Inch & Metric O.D. Sizes 16-17

Metal Cartridges Inch & Metric O.D. Sizes 16-17

Other

Technical Specifications 2

How to Make a John Guest Connection 3

Chemical Compatibility Chart 24-25

Index 43-44

2

Technical SpecificationsWorking Pressure and Temperature Range for Acetal Fittings (PI, SI, SM and PM).Super Speedfit ® fittings are suitable for the following pressures and temperatures.

Temp. Pressure

5/32” - 5/16” 3/8” -1/2”

4mm - 8mm 10mm - 22mm

Air

- 4˚F 230 psi 150 psi

- 20˚C (16 Bar) (10 Bar)

Potable Liquids and Air

+33˚F 230 psi 150 psi

+1˚C (16 Bar) (10 Bar)

+73˚F 230 psi 150 psi

+23˚C (16 Bar) (10 Bar)

+158˚F 150 psi 100 psi

+70˚C (10 Bar) (7 Bar)

Also suitable for vacuum

For Polypropylene Working Pressure and Temperature Range, please refer to page 4. Depending on the tube used, under certain conditions fittings may be used at higher pressures and tempera-tures. Please refer to our Technical Support Department for guidance. Note 1 Bar = 14.5 PSIG.

Tube TypesPlastic Tube - Polyethylene, nylon and polyurethane conforming to the tolerances shown below. For soft tubing or thin wall tube we recommend the use of tube inserts.Braided Tube - Use of Tube to Hose Stems listed on page 8 is essential when using braided tube or hose. The use of clamps to retain braided tube on barbs is recommended. Metal Tube (soft) - Brass, copper or mild steel conform-ing to the tolerances below.Metal Tube (hard) - We do not recommend Super Speedfit fittings for hard metal or chrome plated tubes.For stainless steel and other polished metal tubes we recommend the use of Superseal fittings. These are shown on page 11 of this catalog.It is essential that outside diameters be free from score marks and that the tube be deburred before inserting the fitting.

Tube TolerancesSuper Speedfit ® fittings are offered for tubes with out-side diameters to the following tolerances.

Size (inches) 5/32 - 3/16 1/4 - 1/2

Tolerance (inches)

+0.001 / -0.003 +0.001 / -0.004

Size (mm) 4mm - 5mm 6mm - 22mm

Tolerance (mm) +0.05 / -0.07 +0.05 / -0.10

Installation and System TestingFittings and tube should be kept clean and undam-aged before use.All tube and fittings installations must be pressure tested after installation to ensure system integrity before handing over to the final user. Refer to “How to make a connection” on inside front cover.

ChemicalsFor use with chemicals or other potentially aggressive liquids, please refer to our Chemical Compatibility Chart shown on pages 24 and 25, or contact our Technical Support Department.Super Speedfit fittings are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems.

Collet CoversAre available as additional security against removal of the tube or to provide a simple means of color coding. The cover is offered in a range of six colors. Please see page 23 of this catalog.

Food Quality All the fittings in this catalog are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications.The wetted surfaces of John Guest PI, PM, SI, CI, PP and NC plastic fittings, PPSV and PISV Valves, and PE Tubing are in compliance with FDA requirements for direct con-tact with food as detailed in 21CFR part 177.2470 for the body and 177.2600 for the o-ring.NSF International Standard 51 and 61.

Maximum Torque Values for Plastic Threads BSP, BSPT & NPT.Do not overtighten plastic threaded fittings as this could cause undue stress and eventual failure. Maximum rec-ommended torque figures are shown below.

Threads

1/8” - 1/4” 3/8” - 1/2” 3/4”

Maximum Torque

1.0ft lbs 2.2ft lbs 2.9ft lbs

1.5Nm 3.0Nm 4.0Nm

John Guest recommends that OEM customers con-sider replacing threaded ports with the more modern Cartridge Systems.It is recommended that all installations are checked prior to use to determine that a seal has been made.The maximum torque figures quoted for use with Speedfit fittings are dependent on the mating thread conforming to the relevent U.S., British or International thread standard.

Maintenance and Replacement IntervalsJohn Guest products generally require little mainte-nance but as a minimum we recommend routine visual inspection. Frequency of visual inspection will depend on severity of application and risk of failure. If after visual inspection John Guest products appear damaged, cracked, charred, discolored, heat distorted or corroded, they should be replaced. Any product that is or appears to be leaking should be replaced.

Product life is affected by the severity of the application, the hostility of the working environment and contact with aggressive chemicals or liquids. It is therefore important that specific replacement intervals be considered by specifiers/users/customers based on previous service life or when failure could result in unacceptable downtime, damage or injury risk.

Cleaners and Sanitizing of Acetal FittingsOur advice to customers is to use cleaners and sanitizing agents that are above pH4 and low in hypochlorite level. Acetal fittings and parts that are cleaned and/or sanitized should be rinsed immediately with copious amounts of clean, neutral tap water to remove all traces of the clean-ers. Details of which products are made from acetal are shown in our catalog but generally John Guest products incorporating acetal are designated by the part number prefix PI, PM, CI, CM and RM. Polypropylene fittings offer greater resistance to aggressive chemicals than acetal fittings. Polypropylene does not have the same mechani-cal properties as acetal and John Guest polypropylene fittings are generally designated by the part number prefix PP, PPSV and PPASV.Our material suppliers recommend ECOLAB Oasis 133 as a suitable external cleaner for acetal products manu-factured by John Guest.

Responsibility of Use While we give a warranty against defects in manufacture or materials, it is the responsibility of the user/installer to ensure that fittings and related products are suitable for their application. The installation must be carried out correctly in accordance with our recommendations, complying with recognized codes of practice and rel-evant national standards, and be properly maintained. Please refer to our terms and conditions of sale.

Product Selection and InstallationJohn Guest fittings and related products are specifi-cally designed and manufactured by John Guest to the Technical Specifications set out in the John Guest Product Catalog. All John Guest fittings and related prod-ucts should be selected, installed, used and maintained in accordance with these Technical Specifications. It is the customer’s/user’s responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, and are properly installed and maintained and are used in accordance with the Technical Specifications. It is also the customer’s/user’s responsibility to provide its customers with any relevant technical information about John Guest products it sup-plies them.The company has a policy of continuous research and development and reserves the right to amend without notice the specification and design of all products illus-trated in this catalog. John Guest reserves the right to change the color and shape of products. Photographs are for illustration purposes only.Subject to our Terms and Conditions of Sale shown on page 45.John Guest USA, Inc. is not responsible for misprints or typographical errors.

3

Grips before it sealsThe Collet (gripper) has stainless steel teeth which hold the tube firmly in position whille the o-ring provides a permanent leakproof seal.

How to make a John Guest ConnectionTo make a connection, the tube is simply pushed in by hand; the unique patented John Guest collet locking system then holds the tube firmly in place without deforming it or restricting flow.

How to make a connectionCut the Tube Square

Cut the tube square and remove burrs and sharp edges. Ensure that the outside diameter is free from score marks. For soft or thin-walled plastic tubing we recommend the use of a tube insert.

Push up to tube stop

Push the pipe into the fitting and up to the tube stop.

Pull to check secure

Pull on the tube to check that it is secure. Test the system before use.

To disconnectPush in collet and remove pipe

To disconnect, ensure that the system is depressurized, push the collet square against the fitting. With the collet held in this position the tube can be removed.

Materials of ConstructionJohn Guest Fittings are made up of three components:

Bodies are produced in acetal copolymer or polypropylene.

O-rings are produced in nitrile or EPDM.

Collets are produced in acetal copolymer or polypropylene with stainless steel teeth.

O-ring provides a leakproof seal

Stainless Steel teeth grip the pipe.

Collet

4

Inch Polypropylene FittingsThe PP Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. to 1/2" O.D. The fittings are manufactured in white polypropylene with food grade EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C) Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C) Min. 33˚F/1˚C

Detailed technical information is shown on page 2.

MALE CONNECTOR NPTF THREAD

PART NO. TUBE THREAD OD NPTF

PP010821W 1/4 - 1/8 PP010822W 1/4 - 1/4 PP010823W 1/4 - 3/8 PP011222W 3/8 - 1/4 PP011223W 3/8 - 3/8 PP011224W 3/8 - 1/2 PP011623W 1/2 - 3/8 PP011624W 1/2 - 1/2

UNION TEE

PART NO. TUBE OD

PP0208W 1/4 PPM0208W 5/16 PP0212W 3/8 PP0216W 1/2

UNION ELBOW

PART NO. TUBE OD

PP0308W 1/4 PPM0308W 5/16 PP0312W 3/8 PP0316W 1/2

STEM ADAPTER NPTF THREAD

PART NO. STEM THREAD OD NPTF

PP050821W 1/4 x 1/8 PP050822W 1/4 x 1/4 PP051222W 3/8 x 1/4 PP051223W 3/8 x 3/8 PP051623W 1/2 x 3/8 PP051624W 1/2 x 1/2

REDUCER

PART NO. STEM TUBE OD OD

PP061208W 3/8 - 1/4 PP061612W 1/2 - 3/8 PP062008W 5/8 - 1/4 PP062012W 5/8 - 3/8 PP062016W 5/8 - 1/2

PLUG

PART NO. STEM OD

PP0808W 1/4 PPM0808W 5/16 PP0812W 3/8 PP0816W 1/2

SWIVEL ELBOW NPTF THREAD


PP090821W 1/4 x 1/8 PP090822W 1/4 x 1/4 PP091222W 3/8 x 1/4 PP091223W 3/8 x 3/8

UNION CONNECTOR

PART NO. TUBE OD

PP0408W 1/4 PPM0408W 5/16 PP0412W 3/8 PP0416W 1/2

SWIVEL BRANCH TEE CENTER LEG

NPTF THREAD



New

New

5

PLUG IN ELBOW


PP220808W 1/4 - 1/4 PPM220808W 5/16 - 5/16 PP221208W 3/8 - 1/4 PP221212W 3/8 - 3/8 PP221616W 1/2 - 1/2

FIXED ELBOW NPTF THREAD


PP480821W 1/4 x 1/8 PP480822W 1/4 x 1/4 PP480823W 1/4 x 3/8 PP481222W 3/8 x 1/4 PP481223W 3/8 x 3/8

REDUCING UNION CONNECTOR

PART NO. TUBE TUBE OD OD

PP201208W 3/8 - 1/4 PP201612W 1/2 - 3/8

REDUCING TEE

PART NO. TUBE OD TUBE OD TUBE OD END END BRANCH

PP30120812W 3/8 x 1/4 x 3/8 PP30121208W 3/8 x 3/8 x 1/4 PP301612W 1/2 x 1/2 x 3/8

FAUCET CONNECTOR UNS THREAD

PART NO. TUBE THREAD OD UNS

PP3208U7W 1/4 x 7/16 - 24 PP3212U7W 3/8 x 7/16 - 24

TUBE TO HOSE STEM

PART NO. STEM HOSE OD ID

PP251212W 3/8 - 3/8 PP251216W 3/8 - 1/2 PP251612W 1/2 - 3/8 PP251616W 1/2 - 1/2

BULKHEAD UNION

PART NO. TUBE Mounting OD Hole Dia.

PP1208W 1/4 0.67 PP1212W 3/8 0.83 PP1216W 1/2 1.06

Polypropylene Bulkhead Unions are not intended for submerged use.

REDUCING BULKHEAD UNION

PART NO. TUBE TUBE Mounting OD OD Hole Dia.

PP121208W 3/8 - 1/4 0.83

TWO WAY DIVIDER

PART NO. TUBE OD

PP2312W 3/8

FEMALE ADAPTER NPTF THREAD



REDUCING ELBOW


PP211008W 5/16 - 1/4 PP211208W 3/8 - 1/4 PP211612W 1/2 - 3/8

ACCESSORIES FOR PP FITTINGS ARE SHOWN ON PAGE 23.

SWIVEL MALE RUN TEE NPTF THREAD



6

UNION ELBOW

PART NO. TUBE OD

PM0304S 5/32 PI0306S 3/16 PI0308S 1/4 PM0308S 5/16 PI0312S 3/8 PI0316S 1/2

UNION CONNECTOR

PART NO. TUBE OD


Inch Acetal FittingsThe PI Range of inch-size push-in fittings is offered for tube sizes 5/32" O.D. to 5/8" O.D. The fittings are manufactured in gray acetal copolymer with food grade nitrile o-ring, making them especially suitable for applications involving foodstuff and potable liquids. They are especially suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum.


MALE CONNECTOR BSPT THREAD

PART NO. TUBE THREAD OD BSPT

PM010401S 5/32 x 1/8 PM010402S 5/32 x 1/4 PI010601S 3/16 x 1/8 PI010602S 3/16 x 1/4 PI010801S 1/4 x 1/8 PI010802S 1/4 x 1/4 PM010801S 5/16 x 1/8 PM010802S 5/16 x 1/4 PM010803S 5/16 x 3/8 PI011202S 3/8 x 1/4 PI011203S 3/8 x 3/8 PI011603S 1/2 x 3/8 PI011604S 1/2 x 1/2

PART NO. TUBE THREAD OD BSPP

PI010812S 1/4 x 1/4 PI011212S 3/8 x 1/4

MALE CONNECTOR BSPP THREAD



PM010421S 5/32 x 1/8 PM010422S 5/32 x 1/4 PI010621S 3/16 x 1/8 PI010821S 1/4 x 1/8 PI010822S 1/4 x 1/4 PI010823S 1/4 x 3/8 PM010821S 5/16 x 1/8 PM010822S 5/16 x 1/4 PM010823S 5/16 x 3/8 PI011221S 3/8 x 1/8 PI011222S 3/8 x 1/4 PI011223S 3/8 x 3/8 PI011224S 3/8 x 1/2 PI011623S 1/2 x 3/8 PI011624S 1/2 x 1/2 PI012026S 5/8 x 3/4


NCPI011211S 3/8 x 1/8 NCPI011212S 3/8 x 1/4


3/8" x 1/4" has special large seal for use with chamfered face ports.

No thread seal on 3/8" x 1/8".

UNION TEE

PART NO. TUBE OD



PM050421S 5/32 x 1/8 PM050422S 5/32 x 1/4 PI050621S 3/16 x 1/8 PI050821S 1/4 x 1/8 PI050822S 1/4 x 1/4 PI050823S 1/4 x 3/8 PM050821S 5/16 x 1/8 PM050822S 5/16 x 1/4 PM050823S 5/16 x 3/8 PI051222S 3/8 x 1/4 PI051223S 3/8 x 3/8 PI051623S 1/2 x 3/8 PI051624S 1/2 x 1/2


45˚ FLARE

FLARE MALE CONNECTOR MFL THREAD

PART NO. TUBE THREAD OD MFL

PI0108F4S 1/4 x 1/4 PM0108F5S 5/16 x 5/16 PI0112F4S 3/8 x 1/4 PI0112F5S 3/8 x 5/16 PI0112F6S 3/8 x 3/8 PI0112F8S 3/8 x 1/2 PI0116F8S 1/2 x 1/2 PM0108C5S 5/16 x 1/2 - 16UN PI0112C5S 3/8 x 1/2 - 16UN

1/4" (MFL) corresponds to a 7/16-20 UNF 5/16" (MFL) corresponds to a 1/2-20 UNF 3/8" (MFL) corresponds to a 5/8-18 UNF 1/2" (MFL) corresponds to a 3/4-16 UNF

7

PART NO. STEM OD


PLUG

REDUCER


PI060605S 3/16 - 5/32 PI061006S 5/16 - 3/16 PI061008S 5/16 - 1/4 PI061206S 3/8 - 3/16 PI061208S 3/8 - 1/4 PI061210S 3/8 - 5/16 PI061610S 1/2 - 5/16 PI061612S 1/2 - 3/8

STEM ADAPTER BSPT THREAD

PART NO. STEM THREAD OD BSPT

PM050401S 5/32 x 1/8 PM050402S 5/32 x 1/4 PI050601S 3/16 x 1/8 PI050801S 1/4 x 1/8 PI050802S 1/4 x 1/4 PM050801S 5/16 x 1/8 PM050802S 5/16 x 1/4 PM050803S 5/16 x 3/8 PI051202S 3/8 x 1/4 PI051203S 3/8 x 3/8 PI051603S 1/2 x 3/8 PI051604S 1/2 x 1/2

STEM ADAPTER BSPP THREAD

PART NO. STEM THREAD OD BSPP

PM050812S 5/16 x 1/4 PI051212S 3/8 x 1/4 PI051213S 3/8 x 3/8

SWIVEL ELBOW BSPT THREAD


PI090601S 3/16 x 1/8 PI090801S 1/4 x 1/8 PI090802S 1/4 x 1/4 PM090801S 5/16 x 1/8 PM090802S 5/16 x 1/4 PM090803S 5/16 x 3/8 PI091202S 3/8 x 1/4 PI091203S 3/8 x 3/8 PI091603S 1/2 x 3/8 PI091604S 1/2 x 1/2

SWIVEL ELBOW NPTF THREAD


PM090421S 5/32 x 1/8 PM090422S 5/32 x 1/4 PI090621S 3/16 x 1/8 PI090821S 1/4 x 1/8 PI090822S 1/4 x 1/4 PM090821S 5/16 x 1/8 PM090822S 5/16 x 1/4 PM090823S 5/16 x 3/8 PI091221S 3/8 x 1/8 PI091222S 3/8 x 1/4 PI091223S 3/8 x 3/8 PI091622S 1/2 x 1/4 PI091623S 1/2 x 3/8 PI091624S 1/2 x 1/2


BSPT THREAD






NPTF THREAD

SWIVEL MALE RUN TEE NPTF THREAD



SWIVEL MALE RUN TEE BSPT THREAD



John Guest AdaptabilityStandard Super Speedfit products can be coupled together to form integral new fittings.

+ =

+ =

+ =

8

TWO-WAY DIVIDER

PART NO. TUBE OD

PI2308S 1/4 PM2308S 5/16 PI2312S 3/8 PI2316S 1/2

UNEQUAL TWO-WAY DIVIDER

PART NO. TUBE OD TUBE OD INLET OUTLET

PI241210S 3/8 - 5/16

REDUCING BULKHEAD UNION

PART NO. TUBE TUBE MOUNTING HOLE OD OD DIA. (INCH)

NC392-02 1/2 - 1/4 0.83 PI121208S 3/8 - 1/4 0.83

BULKHEAD UNION

PART NO. TUBE MOUNTING HOLE OD DIA. (INCH)

PM1204S 5/32 0.67 PI1206S 3/16 0.67 PI1208S 1/4 0.67 PM1208S 5/16 0.83 PI1212S 3/8 0.83 PI1216S 1/2 1.06

ENLARGER


PI131012S 5/16 - 3/8 PI131216S 3/8 - 1/2



PI200806S 1/4 - 3/16 PM200804S 5/16 - 5/32 PI201006S 5/16 - 3/16 PI201008S 5/16 - 1/4 PI201206S 3/8 - 3/16 PI201208S 3/8 - 1/4 PI201210S 3/8 - 5/16 PI201610S 1/2 - 5/16 PI201612S 1/2 - 3/8

REDUCING ELBOW


PM210804S 5/16 - 5/32 PI211006S 5/16 - 3/16 PI211008S 5/16 - 1/4 PI211206S 3/8 - 3/16 PI211208S 3/8 - 1/4 PI211210S 3/8 - 5/16 PI211610S 1/2 - 5/16 PI211612S 1/2 - 3/8

PLUG IN ELBOW


PM220404S 5/32 - 5/32 PI220606S 3/16 - 3/16 PI220808S 1/4 - 1/4 PM220808S 5/16 - 5/16 PI221206S 3/8 - 3/16 PI221208S 3/8 - 1/4 PI221210S 3/8 - 5/16 PI221212S 3/8 - 3/8 PI221616S 1/2 - 1/2

REDUCING TEE

PART NO. TUBE OD TUBE OD ENDS BRANCH

PI301208S 3/8 - 1/4 PI301612S 1/2 - 3/8

TUBE TO HOSE ELBOW


PI290808S 1/4 - 1/4 PI290810S 1/4 - 5/16 PI291008S 5/16 - 1/4 PM290808S 5/16 - 5/16 PI291208S 3/8 - 1/4 PI291210S 3/8 - 5/16

TUBE TO HOSE STEM


PI250806S 1/4 - 3/16 PI250808S 1/4 - 1/4 PI250810S 1/4 - 5/16 PI251006S 5/16 - 3/16 PI251008S 5/16 - 1/4 PM250808S 5/16 - 5/16 PI251012S 5/16 - 3/8 PI251208S 3/8 - 1/4 PI251210S 3/8 - 5/16 PI251212S 3/8 - 3/8 PI251216S 3/8 - 1/2 PI251612S 1/2 - 3/8 PI251616S 1/2 - 1/2

TUBE TO HOSE STEM LONG VERSION


PI251012SL 5/16 - 3/8 PI251212SL 3/8 - 3/8

ACCESSORIES FOR PI FITTINGS ARE SHOWN ON PAGE 23.

9

FEMALE CONNECTOR BSPP THREAD - FLAT END


PI451014FS 5/16 x 1/2 PI451015FS 5/16 x 5/8 PI451213S 3/8 x 3/8 PI451214FS 3/8 x 1/2 PI451215FS 3/8 x 5/8 PI451613S 1/2 x 3/8 PI451615FS 1/2 x 5/8

FEMALE CONNECTOR BSPP THREAD - CONE END


PI451014CS 5/16 x 1/2 PI451015CS 5/16 x 5/8 PI451214CS 3/8 x 1/2 PI451215CS 3/8 x 5/8 PI451614CS 1/2 x 1/2 PI451615CS 1/2 x 5/8

FEMALE CONNECTOR UN THREAD

PART NO. TUBE THREAD OD UN

PM4508C5S 5/16 x 1/2 - 16 PI4512C5S 3/8 x 1/2 - 16 PI4516C5S 1/2 x 1/2 - 16

FEMALE CONNECTOR NPTF THREAD


PI450822S 1/4 x 1/4 PI451222S 3/8 x 1/4

FAUCET CONNECTOR BSPP THREAD


CI320814S 1/4 x 1/2 CI321214S 3/8 x 1/2

FAUCET CONNECTOR UNS THREAD

PART NO. TUBE THREAD OD UNS

CI3208U7S 1/4 x 7/16 - 24 CI3210U7S 5/16 x 7/16 - 24 CI3212U7S 3/8 x 7/16 - 24

THREE WAY DIVIDER

PART NO. TUBE OD TUBE OD INLET OUTLET

PI491612S 1/2 - 3/8

CROSS

PART NO. TUBE OD

PI4712S 3/8

FEMALE FLARE CONNECTOR FFL THREAD

PART NO. TUBE THREAD OD FFL

PM4508F4S 5/16 x 1/4 PI4512F4S 3/8 x 1/4 PI4512F6S 3/8 x 3/8

1/4 (FFL) corresponds to a 7/16 - 20 UNF 3/8 (FFL) corresponds to a 5/8 - 18 UNF

45˚ FLARE



PI480821S 1/4 x 1/8 PI480822S 1/4 x 1/4 PI480823S 1/4 x 3/8 PI481222S 3/8 x 1/4 PI481223S 3/8 x 3/8 PI482024S 5/8 x 1/2

DISPENSING VALVE ELBOW

PART NO. TUBE STEM OD OD

NC356-02 3/8 - 3/8

DISPENSING VALVE STEM

PART NO. STEM OD

NC730-02 3/8

END STOP

PART NO. TUBE OD

PI4608S 1/4 PI4612S 3/8

OFFSET CONNECTOR


NC641 1/2 - 5/16

The U-Bend is offered for 1/2 inch OD tube sizes. Existing 1/2 inch ID lines can be accommodated by using a standard Tube to Hose Stem.

PART NO. TUBE OD

PIUB12S 3/8 PIUB16S 1/2

U-BEND

PART NO. TUBE OD

1/4SCV 1/4 5/16SCV 5/16 3/8SCV 3/8

CHECK VALVE

Super Speedfit Single Check Valves allow flow in one direction.

For liquids only

NSF 51NSF 61

10

Inch Acetal Fittings (White)The CI range of inch-size fittings is offered for tube sizes 1/4" O.D. and 3/8" O.D. The fittings are manufactured in white acetal, with a food grade EPDM o-ring. They have been developed for the water industry but are equally suitable for other pota-ble liquids. They are also recommended for intermittent hot water applications.

Selected items are available with red or blue collets.

The CI Range is NOT suitable for compressed air applications. For these situations we recommend the PI Range on pages 6 - 9.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (Max. 10 bar at 20˚C) Max. 100 psi at 150˚F (Max. 7 bar at 65˚C) Min. 33˚F/1˚C




CI010821W 1/4 x 1/8 CI010822W 1/4 x 1/4 CI010823W 1/4 x 3/8 CI011222W 3/8 x 1/4

UNION CONNECTOR

PART NO. TUBE OD

CI0408W 1/4 CI0412W 3/8

REDUCING ELBOW


CI211206W 3/8 - 3/16

PLUG IN ELBOW


CI220808W 1/4 - 1/4 CI221208W 3/8 - 1/4 CI221212W 3/8 - 3/8 CI220808WB 1/4 - 1/4 Blue Collet CI221212WB 3/8 - 3/8 Blue Collet CI220808WR 1/4 - 1/4 Red ColletUNION TEE

PART NO. TUBE OD

CI0208W 1/4 CI0212W 3/8 CI0208WB 1/4 Blue Collet

UNION ELBOW

PART NO. TUBE OD

CI0308W 1/4 CI0312W 3/8 CI0308WB 1/4 Blue Collet CI0312WB 3/8 Blue Collet CI0312WR 3/8 Red Collet







REDUCER


CI061208W 3/8 - 1/4

BARB CONNECTOR SUPERSEAL X BARB

PART NO. SUPERSEAL HOSE OD ID

CI270808W 1/4 - 1/4

TUBE TO HOSE ELBOW


CI291208W 3/8 - 1/4

BULKHEAD UNION

PART NO. TUBE MOUNTING HOLE OD DIA. (INCH)

CI1208W 1/4 0.67

11


PART NO. SUPERSEAL THREAD OD BSPT SM010802S 5/16 x 1/4


PART NO. SUPERSEAL THREAD OD BSPP SM010812S 5/16 x 1/4

FLARE MALE CONNECTOR MFL THREAD

PART NO. SUPERSEAL THREAD OD MFL SM0108F4S 5/16 x 1/4 SM0108F6S 5/16 x 3/8

UNION CONNECTOR SUPERSEAL – SUPERSEAL

PART NO. SUPERSEAL OD SM410808E 5/16

UNION CONNECTOR SUPERSEAL – SPEEDFIT

PART NO. SUPERSEAL SPEEDFIT OD OD SM040808S 5/16 - 5/16 SI041012S 5/16 - 3/8 SI041210S 3/8 - 5/16 SI041212S 3/8 - 3/8

UNION ELBOW SUPERSEAL – SUPERSEAL

PART NO. SUPERSEAL SUPERSEAL OD OD SM400808S 5/16 - 5/16 SI401210S 3/8 - 5/16 SI401212S 3/8 - 3/8

UNION ELBOW SUPERSEAL – SPEEDFIT

PART NO. SUPERSEAL SPEEDFIT OD OD SI030812S 1/4 - 3/8 SM030808S 5/16 - 5/16 SI031012S 5/16 - 3/8 SI031210S 3/8 - 5/16 SI031212S 3/8 - 3/8

BARB CONNECTOR

PART NO. SUPERSEAL HOSE OD ID SI270808S 1/4 - 1/4 SI271008S 5/16 - 1/4 SI271208S 3/8 - 1/4

Inch Superseal FittingsFor use with Stainless Steel TubingThe SI Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. and 3/8" O.D. Superseal is a special fitting designed to provide extra grip on stain-less steel tubes.

The Superseal design features a collet with integrally molded stainless steel teeth similar to the standard Super Speedfit design, but incorporating an additional hand-operated nut and wedge shaped plastic washer to apply extra pressure to the collet and the double o-ring seals. This ensures that the collet teeth bite thoroughly into the tube to provide grip, while at the same time compressing the o-rings to further enhance sealing.

Like other John Guest Fittings, Superseal is suitable for potable liquids and other food quality applications.


FLOW BEND CONNECTOR SUPERSEAL – SPEEDFIT

PART NO. SUPERSEAL SPEEDFIT OD OD SM420808S 5/16 - 5/16 SI421012S 5/16 - 3/8 SI421210S 3/8 - 5/16 SI421212S 3/8 - 3/8

SPANNER

PART NO. SIZE SPAN1 5/16 & 3/8

12

Metric to Inch Fittings

UNION CONNECTOR


NC462 15mm - 1/2”

STEM TO TUBE ADAPTER


NC2164 15mm - 3/8” NC2173 1/2” - 15mm NC908 1/2” - 18mm

TUBE TO HOSE STEM


NC932 15mm - 1/2”

BARB CONNECTOR


NC448 15mm - 1/2”

TEE ADAPTER

PART NO. TUBE OD TUBE OD ENDS BRANCH

NC869 15mm - 3/8"

STEM TO STEM ADAPTER

PART NO. STEM STEM OD OD

NC478 15mm - 3/8"

Inch Brass FittingsDesigned for use in coffee brewing equipment, beverage dispensing and vending machine applications. The fittings are manufactured in brass with a polypropylene collet and a food grade EPDM o-ring.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C) Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C) Min. 33˚F / 1˚C


BRASS FLARE FEMALE FFL

CONNECTOR THREAD

PART NO. TUBE THREAD OD FFL

MI4508F4S 1/4 x 1/4 MI4512F4S 3/8 x 1/4 MI4512F6S 3/8 x 3/8

1/4 (FFL) corresponds to a 7/16 - 20 UNF3/8 (FFL) corresponds to a 5/8 - 18 UNF

BRASS POLYPROPYLENE BSPP FEMALE CONNECTOR THREAD


NC2145 1/4 x 3/4 NC2249 3/8 x 3/4

BRASS FEMALE CONNECTOR NH (GARDEN HOSE) THREAD (National Hose)

PART NO. TUBE THREAD

OD N.H.

NC2258 3/8 x 3/4 - 11.5 NH

BRASS FEMALE CONNECTOR NH

(GARDEN HOSE) THREAD (National Hose)

PART NO. TUBE THREAD

OD NH

NC2098 1/4 x 3/4 - 11.5 NH

A plug in elbow shown on page 5 will provide a neat 90° installation. The tube can be orientated in any direction.

13

Inch Polypropylene Angle Stop Adapter ValvesThe PPSAV Range of inch-size Angle Stop Adapter Valves is offered in white polypropylene with food grade EPDM o-rings. Our Angle Stop Adapter Valve connects between your valve and riser, to the main water supply line, for applications in Reverse Osmosis, Filtration Systems, Automatic Coffee Brewers, Ice-makers, and many more. For use with other potable liquids, please refer to our Technical Support Department for guidance.

The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems.

FOR USE WITH COLD WATER SUPPLY ONLY.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (10 bar at 20˚C) Max. 60 psi at 140˚F (4 bar at 60˚C) Min. 33˚F/1˚C

How to connect the Angle Stop Adapter Valve

1 2 3 4 5 6 7

1. Shut off water supply at brass/chrome supply valve.2. Disconnect riser from brass/chrome supply valve.3. Ensure that the sealing gasket is fully seated into the Angle Stop Valve female thread.

4. Install Angle Stop Adapter Valve on supply valve.5. Connect the riser to the Angle Stop Adapter Valve.6. Fully insert tubing into the Speedfit® side of the valve.7. Open valves and check for leaks.

ANGLE STOP ADAPTER VALVE

PART NO. THREAD MALE THREAD FEMALE TUBE COMPRESSION COMPRESSION OD

ASVPP1 3/8" x 3/8" x 1/4"ASVPP2 3/8" x 3/8" x 3/8"

ANGLE STOP ADAPTER VALVE (CONVERSION THREAD)

PART NO. THREAD MALE THREAD TUBE FEMALE NPS COMPRESSION OD

ASVPP5 1/2" x 3/8" x 1/4"ASVPP6 1/2" x 3/8" x 3/8"

New

Conversion Adapter Included*

*Conversion Adapter can be threaded to either side of the valve to make configurations of 1/2"x1/2" NPS or 3/8"x3/8" Compression.

14

Inch Polypropylene Shut-Off ValveThe PPSV Range of Shut-Off Valve is offered for tube sizes 1/4" O.D. and 3/8" O.D., produced in polypropylene and fitted with EPDM o-rings. Polypropylene has the advantage of being more chemically resistant than acetal.

The valves are for use with potable water. For use with other potable liquids please contact our Technical Support Department for guidance.

The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (Max.10 bar at 20˚C) Max. 60 psi at 140˚F (Max. 4 bar at 60˚C) Min. 33˚F/1˚C


SPEEDFIT TO SPEEDFIT

PART NO. TUBE OD

PPSV040808W 1/4 PPSV041212W 3/8

SPEEDFIT TO MALE NPTF THREAD


PPSV010822W 1/4 x 1/4 PPSV011223W 3/8 x 3/8

SPEEDFIT TO FEMALE NPTF THREAD


PPSV500822W 1/4 x 1/4 PPSV501222W 3/8 x 1/4

Inch Acetal Shut-Off ValveThe PISV Range of Inch-size Shut-Off Valves is available in 3/8" and 1/2" tube O.D. size. The Valve is manufactured in gray acetal copolymer with a nitrile o-ring.

The valves are available with long and short handles to operate a 1/4 turn off action.

Specifically designed for compressed air and potable liquids, the valves are ideal for CO2 lines in beverage dispensing and for pneumatic applications.

It is the customer’s responsibility to ensure that the installation of John Guest fittings in CO2 applications is performed in accordance with the relevant industry and government safety guidelines.

Working Pressures and TemperaturesAir 150 psi at -4˚F (10 bar at -20˚C)Air/Potable Liquids Max. 150 psi at 33˚F (10 bar at 1˚C) Max. 150 psi at 73˚F (10 bar at 23˚C) Max. 100 psi at 150˚F (7 bar at 65˚C)


SHUT-OFF VALVE SHORT HANDLE

PART NO. TUBE OD

PISV0412CS 3/8

SHUT-OFF VALVE LONG HANDLE

PART NO. TUBE OD

PISV0412S 3/8 PISV0416S 1/2

The mounting clip is designed to give a very firm grip. A twisting action is needed to remove the valve. The clip can be used with either shut-off valve. When used with the short handle version, valves can be banked together.

Available for 3/8" O.D. valves.

MOUNTING CLIP

PART NO.

SVMC-10

Acetal Angle Stop ValvesJohn Guest Angle Stop Valves are manufactured in Acetal with EPDM o-rings. They incorporate a single check valve and a 1/4 turn chromium plated ball valve.

The valves are for use with potable water. For use with other potable liquids please refer to our Technical Support Department for guidance.

The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.

Working Pressures and TemperaturesWater Max. 174 psi at 68˚F (12 bar at 20˚C) Min. 87 psi at 149˚F (6 bar at 65˚C)New

PART NO. TUBE TUBE OD OD BRANCH

ASV3 15mm – 1/4 ASV4 15mm – 3/8

ACETAL TEE VALVE

15

CTS Size Plastic Half CartridgesJohn Guest Copper Tube Size Plastic Half Cartridges have been designed for use in Plumbing, Recreational Vehicle and Marine Applications.

Half Cartridge bodies and collets are produced from high quality Engineered Thermoplastic materials with EPDM o-rings.

CTS Size Metal Half CartridgesMetal Half Cartridges have also been designed for use in Plumbing, Recreational Vehicle and Marine Applications.

Metal Half Cartridges bodies are produced from brass, Collets from high quality Engineered Thermoplastic materials with EPDM o-rings.

INCH SERIES

PART NO. CTS

PCI2820 1/2"PCI2828 3/4"

INCH SERIES

PART NO. CTS

MWI2820 1/2”MWI2828 3/4”

Cartridge Assembly

1. Ensure that the cavity is clean and free from debris, burrs, score marks, etc.

2. Insert the cartridge down into the housing; ensure the cartridge is flush with the housing.

3. Insert the o-ring. 4. Insert Collet to complete assembly.

Cavity Dimensional Detail

R0.03

R0.02

R0.01

R0.01

60°

CA

RTR

IDG

E

O-R

ING

TUB

E ST

OP

Size Data

Size ØA ØB ØC D E F ØG H

1/2" CTS 0.967 0.836 0.638 0.392 0.693 1.057 0.546 1.060

3/4" CTS 1.222 1.102 0.886 0.447 0.831 1.362 0.776 1.358

Size Data

Size ØA ØB ØC D E F ØG H

1/2" CTS 0.935 0.836 0.638 0.335 0.693 1.057 0.546 1.060

3/4" CTS 1.222 1.102 0.886 0.427 0.831 1.362 0.776 1.358

R0.03

R0.02

R0.01

R0.01

60°

CA

RTR

IDG

E

O-R

ING

TUB

E ST

OP

Plastic Half Cartridge Metal Half Cartridge

New

New

16

Tube OD Size Plastic Half Cartridges Plastic Half Cartridges have been designed to provide a simple, cost-effective method of integrating the Super Speedfit® technology into a wide variety of original equipment. The cartridge requires low insert loads, making it suitable for many different housing materials.

Plastic Half Cartridges consist of three components: a collet gripper, an o-ring of food grade materials and a plastic body with stainless steel teeth molded into the circumference.

Customers should ensure cartridges are suitable for their applications, materials and operating conditions.

For additional information consult our Technical Support Department.

Tube OD Size Metal Half CartridgesMetal Half Cartridges are designed with the same Super Speedfit® technology as our Plastic Half Cartridges. As with Plastic Half Cartridges, Metal Half Cartridges are designed to provide a simple, cost-effective method of securing tubing into taps, manifolds, flow direction splitters and many other types of components, which can be produced in a wide vari-ety of metals.

Metal Half Cartridges consist of three components: a collet gripper, an o-ring of food grade materials, and a metal body.

Customers should ensure cartridges are suitable for their applications, materials and operating conditions.

For additional information consult our Technical Support Department.

INCH SERIESGRAY ACETAL COLLET

GRAY ACETAL BODY

NITRILE O-ring

PART NO. TUBE OD

PM2804S 5/32"PI2808S 1/4"PM2808S 5/16"PI2812S 3/8"PI2816S 1/2"

Most sizes available with Blue, Red or White Collet, suffix B,R or W (Ex. PI2808S-B)Also available with double o-rings, please use suffix 2 (Ex. PI2808S2).

GRAY ACETAL COLLET

GRAY ACETAL BODY

EPDM O-ring

PART NO. TUBE OD

PCI2808S 1/4"PCM2808S 5/16"PCI2812S 3/8"PCI2816S 1/2"

WHITE POLYPROPYLENE COLLET

WHITE POLYPROPYLENE BODY

EPDM O-ring

PART NO. TUBE OD

PP2808W 1/4”PP2812W 3/8”

WHITE ACETAL COLLET

WHITE ACETAL BODY

NITRILE O-ring

PART NO. TUBE OD

PI2808W 1/4"PM2808W 5/16"PI2812W 3/8"

Also available with Blue or Red Collet, suffix B or R (Ex. PI2808W-B).Also available with double o-rings, please use suffix 2 (Ex. PI2808W2).

METRIC SERIESBLACK ACETAL COLLET

BLACK ACETAL BODY

NITRILE O-ring

PART NO. TUBE OD

PM2806E 6mmPM2808E 8mmPM2810E 10mm

Also available with double o-rings, please use suffix 2 (Ex. PM2806E2).

INCH SERIESGRAY ACETAL COLLET

BRASS BODY

NITRILE O-ring

PART NO. TUBE OD

MM2804N 5/32"MI2806N 3/16"MI2808N 1/4"MM2808N 5/16"MI2812N 3/8"MI2816N 1/2"

Also available with double o-rings, please use suffix 2 (Ex. MM2804N2)

WHITE ACETAL COLLET ON 1/4”

BLACK ACETAL COLLET ON 5/32”

GRAY ACETAL COLLET ON 3/8” AND 5/8”

BRASS BODY

EPDM O-ring

PART NO. TUBE OD

CI2808W 1/4"CI2812N 3/8"CI2820N 5/8"

GRAY ACETAL COLLET

STAINLESS STEEL BODY

NITRILE O-ring

PART NO. TUBE OD

MI2806ST 3/16"MI2808ST 1/4"MM2808ST 5/16"MI2812ST 3/8"

METRIC SERIESBLACK ACETAL COLLET ON 5, 6, 10 AND 12MM

GRAY ACETAL COLLET ON 4 AND 8MM

BRASS BODY

NITRILE O-ring

PART NO. TUBE OD

MM2804N 4mmMM2805N 5mmMM2806N 6mmMM2808N 8mmMM2810N 10mmMM2812N 12mm

Also available with double o-rings, please use suffix 2 (Ex. MM2804N2)

BLACK ACETAL COLLET ON 8MM

GRAY ACETAL COLLET ON 15 AND 22MM

BRASS BODY

EPDM O-ring

PART NO. TUBE OD

CM2808N 8mmCM2815N 15mmCM2822N 22mm

17

Half Cartridges

CARTRIDGE ASSEMBLY

1. Ensure that the cavity is clean and free from debris, burrs, score marks, etc.

2. Insert the cartridge down into the housing; ensure the cartridge is flush with the housing.

3. Insert the o-ring. 4. Insert Collet to complete assembly.

Metric Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H

4mm * 12.50 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0

4mm ** 11.98 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0

5mm 11.98 9.06 5.13 4.90 8.63 11.17 12.44 14.98 4.06 15.0

6mm 13.41 10.00 6.12 4.60 9.80 12.20 14.00 16.50 5.30 16.5

8mm 13.82 11.94 8.13 5.46 10.15 12.70 15.00 17.50 7.35 17.0

10mm 16.05 14.00 10.15 6.86 11.81 14.35 18.17 20.71 9.20 19.0

12mm* 19.10 16.54 12.15 8.65 15.50 19.00 23.50 27.00 11.20 22.0

12mm** 19.74 16.54 12.15 7.72 15.90 - 23.90 - 11.20 24.0

15mm 22.86 20.32 15.19 9.50 17.50 21.00 26.90 30.40 14.20 27.0

22mm 31.05 27.80 22.20 10.85 21.10 24.70 31.60 35.20 21.20 34.5

All dimensions in mm

* - Metal Half Cartridges. ** - Plastic Half Cartridges.

E1 and F1 relate to one o-ring.E2 and F2 relate to two o-rings.

All dimensions in inches

* - Metal Half Cartridges. ** - Plastic Half Cartridges.

E1 and F1 relate to one o-ring.E2 and F2 relate to two o-rings.

Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H

5/32" * 0.492 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59

5/32" ** 0.472 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59

3/16" 0.472 0.348 0.193 0.193 0.340 0.440 0.490 0.590 0.16 0.59

1/4" 0.528 0.424 0.255 0.181 0.386 0.480 0.555 0.650 0.23 0.67

5/16" 0.544 0.470 0.320 0.215 0.400 0.500 0.590 0.690 0.29 0.67

3/8" 0.632 0.547 0.380 0.270 0.465 0.565 0.720 0.815 0.35 0.79

1/2" 0.777 0.671 0.506 0.304 0.561 0.659 0.797 0.896 0.48 0.93

5/8" 0.935 0.836 0.638 0.335 0.703 - 1.093 - 0.50 1.06

Inch

CA

RTR

IDG

E

O-R

ING

TUB

E ST

OP

Cavity Dimensional Detail (Inch)

CA

RTR

IDG

E

O-R

ING

TUB

E ST

OP

Cavity Dimensional Detail (Metric)

18

Inch/Metric Polyethylene Tubing

The John Guest PE Range of plastic tubing is produced in Linear Low Density Polyethylene for cold and intermittent hot water applications.

Our tubing is made from FDA approved materials and is NSF International standard 51 & 61 certified.

John Guest LLDPE Tubing provides excellent resist-

ance to environmental stress cracking as measured by ASTM D-1693 (10% IGEPAL).

John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit push-in fittings, John Guest Shut-Off Valves and virtu-ally all standard tubing connectors.

Sizes AvailablePART NO. OD ID COIL

LENGTHMIN.

RADIUS

PE-08-BI-0500F-N 1/4”(0.250”) 0.170” 500 FT 1.00”PE-08-BI-1000F-N 1/4”(0.250”) 0.170” 1000FT 1.00”PE-10-CI-0500F-N 5/16”(0.3125”) 0.187 500 FT 1.13”PE-12-EI-0500F-N 3/8”(0.375”) 0.250” 500 FT 1.25”PE-16-GI-0250F-N 1/2”(0.500”) 0.375” 250 FT 2.50”

PE-04025-0100M-N 4mm 2.5mm 100m 25mmPE-0604-0100M-N 6mm 4mm 100m 25mmPE-0806-100M-N 8mm 6mm 100m 30mmPE-1007-100M-N 10mm 7mm 100m 32mmPE-1209-100M-N 12mm 9mm 100m 63mmPE-15115-0100M-B 15mm 11.5mm 100m 100mm

N denotes natural color. To request other colors please refer to table below.

Colors AvailableSUFFIX COLOR SIZES

1/4” 5/16” 3/8” 1/2” 4mm 6mm 8mm 10mm 12mm 15mm

N NATURAL 4 4 4 4 4 4 4 4 4 O

W WHITE 4 O 4 4 O O 4 O O O

B BLUE 4 4 4 4 4 4 4 4 4 4

E *BLACK 4 4 4 4 4 4 4 4 4 O

R RED 4 4 4 4 4 4 4 4 4 4

O ORANGE 4 O 4 O O O O O O O

V VIOLET O O 4 O O O O O O O

G GREEN 4 O 4 O O O O O O 4

Y YELLOW 4 O 4 O O O O O O O

* Black tubing is UV stabilized.4Denotes standard colors available.O Denotes optional colors which may be available based on

order quantity.

Working Pressures and Temperatures - LLDPETUBE OD TUBE ID

1/4" x 0.170" 230 psi @ 70°F15 bar @ 20°C5/16" x 0.187"

3/8" x 0.25"4mm x 2.5mm 120 psi @ 150°F6mm x 4mm 8 bar @ 65°C1/2" x 0.375" 150 psi @ 70°F

8mm x 6mm 10 bar @ 20°C10mm x 7mm12mm x 9mm 90 psi @ 150°F15mm x 11.5mm 6 bar @ 65°C

1 Bar = 14.5 psi (approx.)

Maximum Working Temperature 150ºF at pressures shown in chart above. For temperatures above 150ºF customers should contact our Technical Support Department.

Please note maximum pressure rating for a ‘system’ depends on the lowest rated component, e.g., most John Guest fittings have a different rating from the tube ratings shown above.

Burst Pressures are approximately 3 times the maximum working pressure.

Tube insertsIf the tube is used in a hot water system a tube insert is necessary.

PART NO. TUBE ID TUBE ODTSI250S 1/4 - 5/16 TSI312S 5/16 - 3/8TSI375S 3/8 - 1/2

PART NO. TUBE ODTSM10N 10TSM15N 15TSM22N 22

Chemical ResistanceFor use with chemicals or potentially aggressive liquids, please refer to our Technical Service Department.

Exposure to Ultraviolet LightJohn Guest Black LLDPE tubing is UV stabilized and can be exposed to direct ultraviolet light (e.g. direct sunlight); other colors of John Guest LLDPE tubing are not UV stabilized and cannot be exposed to direct ultraviolet light.

Pneumatics ApplicationsJohn Guest LLDPE tube is suitable for pneumatic applications provid-ing pressure is maximum 150 psi @ 70ºF (10 bar @ 20ºC). At elevated temperatures 120°F+ (50ºC+) mineral oil will degrade LLDPE tube and, therefore, LLDPE tube used in pneumatic circuits should be periodi-cally checked and replaced if necessary.

NOTE: When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with tubing and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air / pneumatic systems.

Tube Tolerances1/4" to 1/2" +0.001/-0.004"

4mm to 6mm +0.05/-0.07mm8mm to 12mm +0.05/-0.10mm

15mm +0.10/-0.10mmNSF 51NSF 61

19

Metric Polypropylene FittingsThe PPM Range of metric size push-in fittings is offered for our tube sizes 8mm O.D. to 12mm O.D. The fittings are manufactured in white polypropylene with EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications.

Working Pressures and TemperaturesWater Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C) Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C) Min. 33˚F/1˚C


UNION CONNECTOR

PART NO. TUBE OD

PPM0408W 8PPM0412W 12



PPM201512W 15 - 12

PLUG

PART NO. TUBE OD

PPM0808W 8

UNION ELBOW

PART NO. TUBE OD

PPM0308W 8PPM0312W 12

PLUG-IN ELBOW


PPM220808W 8 - 8PPM221212W 12 - 12

DIVIDER

PART NO. TUBE OD

PPM2312W 12

UNION TEE

PART NO. TUBE OD

PPM0208W 8PPM0212W 12

REDUCER


PPM061512W 15 - 12

Adapters to convert to Inch sizes are shown on page 12.

New

20

Metric Acetal FittingsThe PM Range of metric-size push-in fittings is offered for tube sizes 4mm O.D. to 12mm O.D. The fittings are manufactured in black acetal copolymer with food grade nitrile o-rings. Especially produced for foodstuff and potable liquids, they are equally suitable for air and inert gases and can therefore be used on CO2 lines, pneumatics applications and vacuum.



PART NO. TUBE THREAD OD BSPP (MM) (IN)

PM010411E 4 x 1/8 PM010412E 4 x 1/4 PM010511E 5 x 1/8 PM010512E 5 x 1/4 PM010611E 6 x 1/8 PM010612E 6 x 1/4 PM010811E 8 x 1/8 PM010812E 8 x 1/4 PM010813E 8 x 3/8 PM011012E 10 x 1/4 PM011013E 10 x 3/8 PM011014E 10 x 1/2 PM011213E 12 x 3/8 PM011214E 12 x 1/2


PART NO. TUBE THREAD OD BSPT (MM) (IN)


PART NO. TUBE THREAD OD NPTF (MM) (IN)

PM010622E 6 x 1/4

UNION ELBOW

PART NO. TUBE OD (MM)

PM0304E 4 PM0305E 5 PM0306E 6 PM0308E 8 PM0310E 10 PM0312E 12

UNION CONNECTOR



UNION TEE



STEM ADAPTER BSPT THREAD

PART NO. STEM THREAD OD BSPT (MM) (IN)


STEM ADAPTER BSPP THREAD

PART NO. STEM THREAD OD BSPP (MM) (IN)


21

SWIVEL ELBOW BSPP THREAD



SWIVEL ELBOW BSPT THREAD



SWIVEL BRANCH TEE BSPP THREAD



SWIVEL BRANCH TEE BSPT THREAD



SWIVEL MALE RUN TEE BSPP THREAD



SWIVEL MALE RUN TEE BSPT THREAD



+ =

+ =

+ =

John Guest AdaptabilityStandard Super Speedfit products can be coupled together to form integral new fittings.

REDUCER

PART NO. STEM TUBE OD OD (MM) (MM)

PM060504E 5 - 4 PM060604E 6 - 4 PM060605E 6 - 5 PM060804E 8 - 4 PM060805E 8 - 5 PM060806E 8 - 6 PM061006E 10 - 6 PM061008E 10 - 8 PM061208E 12 - 8 PM061210E 12 - 10 PM061510E 15 - 10

PLUG

PART NO. STEM OD (MM)

PM0804R 4 PM0805R 5 PM0806R 6 PM0808R 8 PM0810R 10 PM0812R 12

R-Denotes Red Color Plug.

22

ENLARGER


PM130405E 4 - 5

TWO-WAY DIVIDER


PM2304E 4 PM2308E 8

ACCESSORIES FOR PM FITTINGS ARE SHOWN ON PAGE 23.

BULKHEAD UNION

PART NO. TUBE MOUNTING HOLE OD (MM) DIA. (MM)

PM1204E 4 16.5 PM1205E 5 16.5 PM1206E 6 16.5 PM1208E 8 21.0 PM1210E 10 21.0 PM1212E 12 26.5

TUBE TO HOSE STEM

PART NO. STEM HOSE OD ID (MM) (MM)

PM250604E 6 - 4 PM250806E 8 - 6 PM251008E 10 - 8

END STOP


PM4612E 12

FEMALE CONNECTOR

PART NO. TUBE THREAD OD (MM) (IN)

PM450411E 4 x 1/8 BSPP PM450612E 6 x 1/4 BSPP PM450812E 8 x 1/4 BSPP PM4508F4S 8 x 1/4 FFL PM4508C5S 8 x 1/2-16UN

OFFSET CONNECTOR

PART NO. TUBE TUBE OD OD (MM) (MM)

NC657 12 - 8

U-BEND


PMUB15E 15

REDUCING ELBOW


PM210604E 6 - 4 PM210804E 8 - 4 PM210806E 8 - 6 PM211004E 10 - 4 PM211006E 10 - 6 PM211008E 10 - 8 PM211208E 12 - 8 PM211210E 12 - 10

PLUG IN ELBOW


PM220404E 4 - 4 PM220505E 5 - 5 PM220606E 6 - 6 PM220808E 8 - 8 PM221010E 10 - 10 PM221212E 12 - 12

REDUCING UNION


PM200604E 6 - 4 PM200804E 8 - 4 PM200806E 8 - 6 PM201004E 10 - 4 PM201006E 10 - 6 PM201008E 10 - 8 PM201208E 12 - 8 PM201210E 12 - 10

FIXED ELBOW

PART NO. TUBE THREAD OD NPTF (MM) (IN)

PM480621E 6 x 1/8 PM480622E 6 x 1/4 PM480623E 6 x 3/8

REDUCING TEE

PART NO. TUBE OD TUBE OD ENDS BRANCH (MM) (MM)

PM3022AE 22 - 15

23

Colors available - Suffix indicates colors

E = Black Y = Yellow B = Blue R = Red S = Gray G = Green

Inch/Metric Accessories

The slip-on Collet Cover shown in the illustration prevents accidental removal or tampering with tubing. Tubing can be inserted with the Collet Cover already attached to the fittings or the cover can slide into position afterwards. The cover is easily removed when required and comes in a variety of colors for color coding.

COLLET COVER

PART NO. TUBE OD


FLOW BEND CLIP

PART NO. TUBE OD

PM2608S 5/16 (8mm) PM2610S 3/8 (10mm)

TUBE INSERT

PART NO. TUBE TUBE ID OD

TSI250S 1/4 5/16 TSI312S 5/16 3/8 TSI375S 3/8 1/2 TSM10N 10 TSM15N 15 TSM22N 22

COLLET LOCKING/RELEASE TOOL

PART NO. SIZE

ICLT/2 3/16 to 1/2 TSPITOOL 1/4, 3/8

TUBE CUTTER

PART NO.

TSNIP BLADES BLADES ONLY

PIPE CUTTER

PART NO.

JG-TS

Suitable for up to 22mm pipe.

LOCKING CLIP

PART NO. TUBE OD

Inch PIC1808R 1/4 PIC1812R 3/8 PIC1816R 1/2Metric PMC1808R 8mm PMC1815R 15mm

Secures the collet in its position to prevent an accidental disconnection of the tube.

Locking clips should be connected only after full insertion to prevent scrap-ing of the tube. Locking Clips are not designed for use with John Guest Stem Adapters in Swivel Combinations.

Suitable for up to 12mm tube.

Please indicate by suffix, color required or gray will be supplied.

INCH SIZE

Designed to support tube and eliminate kinking.

PART NO. TUBE OD

PM1904E 4 PM1905E 5 PM1906E 6 PM1908E 8 PM1910E 10 PM1912E 12 PM1915E 15 PM1918E 18 PM1922E 22

15mm to 22mm sizes are only available in black as standard, white, red or blue

Please indicate by suffix, color required or black will be supplied.

METRIC SIZE

24

Chemical Compatability ChartChemical Compatability for Material Contact of Standard PM/PI, CM/CI and PP Range of Fittings and LLDPE Range of Tubing.This chart describes the compatability of the materials of construction of our standard PM/PI, CM/CI and PP Fittings and LLDPE Tubing when in contact solely with the listed chemical substance. It is intended as a guide only and is not an assurance of suitability for any specific application. Customers are advised to determine suitability for their application. For further details please contact our Technical Support Department.

CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING

ACETALDEHYDE UNSUITABLE SATISFACTORY NOT TESTED NOT TESTED CANE-SUGAR LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED

ACETATE SOLVENTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED CARBON DIOXIDE - DRY SATISFACTORY SATISFACTORY NOT TESTED GOOD

ACETIC ACID 3% SATISFACTORY GOOD GOOD NOT TESTED CARBON DIOXIDE - WET SATISFACTORY SATISFACTORY NOT TESTED GOOD

ACETIC ACID 20% SATISFACTORY NOT TESTED NOT TESTED NOT TESTED CARBON TETRACHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE

ACETIC ACID 50% SATISFACTORY NOT TESTED NOT TESTED NOT TESTED CHLORINE - DRY UNSUITABLE UNSUITABLE UNSUITABLE POOR

ACETONE UNSUITABLE GOOD GOOD NOT TESTED CHLORINE - WET UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED

ACETOPHENONE UNSUITABLE SATISFACTORY NOT TESTED NOT TESTED CHLOROFORM UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE

ACETYLENE NOT FOR USE WITH THIS SUBSTANCE GOOD CHROMIC ACID 3% UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED

AIR GOOD GOOD GOOD GOOD CITRIC ACID 10% SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED

ALCOHOLS 95% NOT TESTED GOOD NOT TESTED NOT TESTED COKE OVEN GAS UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED

ALUMINUM CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED COPPER SALTS NOT TESTED NOT TESTED GOOD NOT TESTED

ALUMINUM SULFATE SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED COPPER SULFATE 10% GOOD GOOD NOT TESTED GOOD

ALUMS UNSUITABLE UNSUITABLE NOT TESTED GOOD COTTONSEED OIL GOOD GOOD NOT TESTED SATISFACTORY

AMMONIA - COLD GAS GOOD GOOD GOOD GOOD CREOSOTE SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED

AMMONIA - LIQUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED CYLCOHEXANOL SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED

AMMONIUM ACETATE NOT TESTED NOT TESTED NOT TESTED GOOD CYLCOHEXANONE UNSUITABLE SATISFACTORY SATISFACTORY UNSUITABLE

AMMONIUM CARBONATE UNSUITABLE GOOD GOOD NOT TESTED D.D.T. NOT TESTED NOT TESTED NOT TESTED NOT TESTED

AMMONIUM CHLORIDE UNSUITABLE UNSUITABLE GOOD NOT TESTED DETERGENT SOLUTION GOOD GOOD GOOD SATISFACTORY

AMMONIUM HYDROXIDE UNSUITABLE GOOD NOT TESTED NOT TESTED DIBUTYL PHTHALATE UNSUITABLE SATISFACTORY NOT TESTED POOR

AMMONIUM NITRATE SATISFACTORY SATISFACTORY GOOD GOOD DICHLOROETHYLENE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

AMMONIUM PHOSPHATE NOT TESTED NOT TESTED NOT TESTED GOOD DIMETHYLFORMAMIDE UNSUITABLE SATISFACTORY SATISFACTORY NOT TESTED

AMMONIUM SULFATE 10% pH 5.8 GOOD GOOD GOOD GOOD DIOXANE UNSUITABLE SATISFACTORY NOT TESTED SATISFACTORY

AMYL ACETATE UNSUITABLE NOT TESTED NOT TESTED POOR ETHER (DAB 6) NOT TESTED NOT TESTED NOT TESTED UNSUITABLE

AMYL ALCOHOL SATISFACTORY SATISFACTORY SATISFACTORY SATISFACTORY ETHYL ACETATE UNSUITABLE SATISFACTORY SATISFACTORY POOR

AMYL CHLORIDE NOT TESTED NOT TESTED NOT TESTED UNSUITABLE ETHYL ALCOHOL (50%) GOOD GOOD GOOD GOOD

ANILINE UNSUITABLE SATISFACTORY SATISFACTORY NOT TESTED ETHYL ALCOHOL (95%) GOOD GOOD GOOD GOOD

ASPHALT SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED ETHYLENE GLYCOL GOOD GOOD NOT TESTED SATISFACTORY

AUTO REAR END LUBRICANT NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERNOX INHIBITOR REFER TO JOHN GUEST INC. NOT TESTED

AUTOMATIC TRANSMISSION FLUID SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED FERRIC CHLORIDE 10% UNSUITABLE UNSUITABLE NOT TESTED GOOD

BARIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERRIC SULFATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

BEER GOOD GOOD GOOD GOOD FERROUS CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD

BEET-SUGAR LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERROUS SULFATE SATISFACTORY SATISFACTORY NOT TESTED GOOD

BENZALDEHYDE UNSUITABLE GOOD GOOD UNSUITABLE FORMALDEHYDE 40% UNSUITABLE SATISFACTORY SATISFACTORY SATISFACTORY

BENZENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE FORMIC ACID 10% UNSUITABLE UNSUITABLE GOOD SATISFACTORY

BENZOIC ACID UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED FREON REFER TO JOHN GUEST INC. NOT TESTED

BORAX SATISFACTORY GOOD GOOD GOOD GELATIN NOT TESTED NOT TESTED NOT TESTED NOT TESTED

BORIC ACID GOOD GOOD GOOD GOOD GLUCOSE GOOD GOOD GOOD GOOD

BRAKE FLUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED GLYCERIN GOOD GOOD GOOD NOT TESTED

BRANDY NOT TESTED NOT TESTED NOT TESTED NOT TESTED HEPTANE NOT TESTED NOT TESTED NOT TESTED UNSUITABLE

BROMINE WATER UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED HYDRAULIC FLUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED

BUFFER SOLUTION pH 4.0 UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED HYDRAULIC FLUID FIRE RESISTANT NOT TESTED NOT TESTED NOT TESTED NOT TESTED

BUFFER SOLUTION pH 7.0 NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROBROMIDE ACID (HYDROBROMIC ACID) UNSUITABLE UNSUITABLE GOOD GOOD

BUFFER SOLUTION pH 10.0 NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROCHLORIC ACID 30% UNSUITABLE UNSUITABLE SATISFACTORY GOOD

BUTANE NOT FOR USE WITH THIS SUBSTANCE NOT TESTED HYDROCHLORIC ACID 50% UNSUITABLE UNSUITABLE NOT TESTED GOOD

BUTTER GOOD GOOD GOOD SATISFACTORY HYDROCYANIC ACID NOT TESTED NOT TESTED NOT TESTED GOOD

BUTYL ACETATE UNSUITABLE SATISFACTORY SATISFACTORY POOR HYDROFLOURIC ACID - 40% UNSUITABLE UNSUITABLE GOOD GOOD

BUTYL RUBBER NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROFLOURIC ACID - 50% UNSUITABLE UNSUITABLE NOT TESTED GOOD

CALCIUM ARSENATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROFLOURIC ACID - DILUTE UNSUITABLE UNSUITABLE GOOD GOOD

CALCIUM BISULFITE NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROGEN FLOURIDE UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED

CALCIUM CHLORIDE GOOD GOOD GOOD NOT TESTED HYDROGEN GAS NOT FOR USE WITH THIS SUBSTANCE GOOD

CALCIUM HYPOCHLORITE UNSUITABLE UNSUITABLE GOOD GOOD HYDROGEN PEROXIDE 3% NOT TESTED UNSUITABLE SATISFACTORY NOT TESTED

CALCIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED

25

CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING

HYDROGEN SULFIDE UNSUITABLE SATISFACTORY GOOD NOT TESTED SHELLAC NOT TESTED NOT TESTED NOT TESTED NOT TESTED

IODINE (IN ALCOHOL SOLUTION) UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED SILVER NITRATE SATISFACTORY SATISFACTORY NOT TESTED GOOD

ISO-PROPANOL SATISFACTORY GOOD NOT TESTED GOOD SOAP SOLUTION GOOD GOOD GOOD SATISFACTORY

KEROSENE SATISFACTORY UNSUITABLE UNSUITABLE UNSUITABLE SODIUM BICARBONATE 10% NOT TESTED NOT TESTED NOT TESTED GOOD

LACTIC ACID 20% SATISFACTORY GOOD GOOD NOT TESTED SODIUM BISULFATE UNSUITABLE UNSUITABLE NOT TESTED GOOD

LEAD ACETATE SATISFACTORY SATISFACTORY NOT TESTED GOOD SODIUM BISULFITE UNSUITABLE UNSUITABLE NOT TESTED GOOD

LIME SULPHUR NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM BORATE GOOD GOOD NOT TESTED GOOD

LINSEED OIL GOOD GOOD GOOD POOR SODIUM CARBONATE 10% GOOD GOOD GOOD GOOD

LUBRICATION OIL (WITH MOLYBDENUM) NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM CHLORATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

MACHINE OIL NOT TESTED NOT TESTED NOT TESTED GOOD SODIUM CHLORIDE 10% GOOD GOOD GOOD GOOD

MAGNESIUM CHLORIDE SATISFACTORY SATISFACTORY NOT TESTED GOOD SODIUM CYANIDE SATISFACTORY SATISFACTORY NOT TESTED GOOD

MAGNESIUM HYDROXIDE SATISFACTORY GOOD NOT TESTED GOOD SODIUM HYDROXIDE (CAUSTIC SODA SOLUTION) SATISFACTORY GOOD GOOD NOT TESTED

MAGNESIUM SULFATE NOT TESTED NOT TESTED NOT TESTED GOOD SODIUM HYPERCHLORITE (12.5 ACTIVE CHLORINE) UNSUITABLE UNSUITABLE SATISFACTORY NOT TESTED

MALEIC ACID UNSUITABLE UNSUITABLE UNSUITABLE GOOD SODIUM METAPHOSPHATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

MANGANESE SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM NITRATE 10% pH 8.8 GOOD GOOD GOOD GOOD

MAYONNAISE NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM PERBORATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

MERCURIC CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD SODIUM PHOSPHATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

MERCURY GOOD GOOD GOOD GOOD SODIUM SILICATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

METHANOL NOT FOR USE WITH THIS SUBSTANCE GOOD SODIUM SULFATE NOT TESTED NOT TESTED NOT TESTED GOOD

METHYL CHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE POOR SODIUM SULFITE NOT TESTED NOT TESTED NOT TESTED GOOD

MILK SATISFACTORY SATISFACTORY GOOD GOOD SODIUM THIOSULFATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

MOTOR OIL NOT TESTED NOT TESTED NOT TESTED DEPENDS ON TYPE STEARIC ACID SATISFACTORY SATISFACTORY SATISFACTORY SATISFACTORY

NATURAL GAS NOT FOR USE WITH THIS SUBSTANCE NOT TESTED SUCCINIC ACID NOT TESTED NOT TESTED NOT TESTED NOT TESTED

NICKEL SALTS NOT TESTED NOT TESTED GOOD NOT TESTED SULFATE LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED

NITRIC ACID - CONCENTRATED UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE SULFUR UNSUITABLE SATISFACTORY GOOD GOOD

NITRIC ACID 10% UNSUITABLE UNSUITABLE SATISFACTORY GOOD SULFUR CHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED

NITROBENZENE UNSUITABLE NOT TESTED NOT TESTED UNSUITABLE SULFUR DIOXIDE GAS UNSUITABLE UNSUITABLE GOOD GOOD

NITROGEN OXIDES NOT TESTED NOT TESTED NOT TESTED NOT TESTED SULFURIC ACID - CONCENTRATED UNSUITABLE UNSUITABLE UNSUITABLE POOR

NITROUS OXIDES UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED SULFURIC ACID - 3% NOT TESTED GOOD GOOD NOT TESTED

OLEIC ACID SATISFACTORY NOT TESTED NOT TESTED POOR SULFURIC ACID - 10% NOT TESTED SATISFACTORY GOOD GOOD

OLIVE OIL GOOD SATISFACTORY SATISFACTORY GOOD SULFUROUS ACID UNSUITABLE UNSUITABLE NOT TESTED GOOD

OXALIC ACID SATISFACTORY SATISFACTORY GOOD SATISFACTORY TANNIC ACID SATISFACTORY SATISFACTORY NOT TESTED SATISFACTORY

OXYGEN SATISFACTORY SATISFACTORY NOT TESTED GOOD TAR SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED

PALMITIC ACID SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED TARTARIC ACID UNSUITABLE UNSUITABLE SATISFACTORY NOT TESTED

PERCHLORIC ACID UNSUITABLE UNSUITABLE NOT TESTED SATISFACTORY TETRAHYDROFURAN UNSUITABLE NOT TESTED NOT TESTED UNSUITABLE

PETROL SATISFACTORY UNSUITABLE NOT TESTED NOT TESTED TETRALIN NOT TESTED NOT TESTED NOT TESTED NOT TESTED

PETROLEUM - REFINED NOT TESTED NOT TESTED NOT TESTED NOT TESTED THIOPHENE NOT TESTED NOT TESTED NOT TESTED NOT TESTED

PETROLEUM OILS NOT TESTED NOT TESTED NOT TESTED NOT TESTED TOLUENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE

PHENOL UNSUITABLE NOT TESTED NOT TESTED NOT TESTED TOMATOES NOT TESTED NOT TESTED NOT TESTED NOT TESTED

PHOSPHORIC ACID - CONCENTRATED UNSUITABLE GOOD GOOD NOT TESTED TRICHLOROETHANE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE

PHOSPHORIC ACID 20 - 25% UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED TURPENTINE SATISFACTORY UNSUITABLE UNSUITABLE UNSUITABLE

PIRIC ACID - AQUEOUS UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED UREA NOT TESTED NOT TESTED NOT TESTED GOOD

PIRIC ACID - MOLTEN UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED VARNISH SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED

POTABLE WATER GOOD GOOD GOOD NOT TESTED VEGETABLE OIL SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED

POTASSIUM HYDROXIDE - 50% SATISFACTORY GOOD GOOD GOOD VINEGAR SATISFACTORY SATISFACTORY GOOD GOOD

POTASSIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED XYLENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE

PROPANE NOT FOR USE WITH THIS SUBSTANCE UNSUITABLE ZINC ACETATE SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED

PYRIDINE UNSUITABLE UNSUITABLE SATISFACTORY SATISFACTORY ZINC CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD

ROSIN, LIGHT NOT TESTED NOT TESTED NOT TESTED NOT TESTED ZINC SALTS NOT TESTED NOT TESTED GOOD GOOD

SALT WATER GOOD GOOD GOOD NOT TESTED

GOOD - Weight increase of less than 5%, or weight loss of less than 3%, and/or a change of the tensile properties of less than 25%.

SATISFACTORY - Weight increase 5% to 10% or weight loss 3% to 5% and/or change of the tensile properties of 25% 40%.

NOT TESTED - This combination has not been tested or reliable data is not available.

POOR - This combination is not tested but may be suitable for very short term exposure (minutes).

UNSUITABLE - Unsuitable for exposure to this material.

Materials used in the construction of the fittings and tubing.

PI/PM Range : Body- Acetal, Seals & o-rings - Nitrile, Collets - Acetal & Stainless Steel

CM/CI Range : Body- Acetal, Seals & o-rings - EPDM, Collets - Acetal & Stainless Steel

PP Range : Body- Polypropylene, Seals & o-rings - EPDM, Collets - Polypropylene & Stainless Steel

NOTE : Ratings used in tables were generally assessed over a period of 30 days by our material suppliers and relate to

chemicals being at a temperature of 20˚C (68˚F).

Any change in temperature or pressure may change the “Rating” on the chemical compatibility. It is the responsibility of the

customer to ensure suitablilty. John Guest U.S.A. Inc. is not responsible for the correctness or interpretations of this chart.

2626

THE PUSH-FIT SOLUTION FOR PLUMBING AND HEATING SYSTEMS

JG Speedfit® is an advanced push-in fitting featuring twist & lock technology that is suitable for the plumbing of normal domestic hot and cold water lines, including pressurized and combination systems.

Speedfit® Fittings have been designed for use with Copper Pipe, Speedfit® PEX Pipe, CPVC, and other PEX Pipe conforming to US Plumbing Standards.

Performance specifications are well within those re-quired for most normal domestic water supply systems including:

• Mainwatersupplylineandindirectcoldwatersys-tems

• Ventedandun-ventedhotwatersystems

• Ventedcentralheatingsystems

Extensive tests have shown that Speedfit® products will withstand temperatures and pressures in excess of normal working conditions.

JG Speedfit® should be installed to conform with good plumbing practice.

The products in this catalog should not be used for gas, fuel oil, or compressed air applications.

INSTALLATION BENEFITS:

• Workswithcopper,CPVC,andPEX

• Notoolsrequired

• Installationtimereducedby40%

• Gripandsealconnection

• Superseal® Insert gives a secondary seal

• Reducedpipeinsertionforce

• Disassemblewithoutdamagetopipeorfitting

• Easytouseinconfinedspaces

PERFORMANCE:

• Twist&lockforaddedsecurity

• Approvedforbehind-the-wallinstallations

• Corrosionfree

• Noscalebuildup

• Pipe flexibility permits the cabling of pipe throughless accessible areas

• Noblowtorchrequired

• Apermanentleak-proofconnection

• Lower thermal diffusivity maintains safer surface temperature

• Pipeelasticitycanreducethepossibilityofburstingunder freezing conditions

• Lead-freeandnon-toxic

• Lessnoisefromwaterflowandexpansion/contraction

• Longpipelengthsrequirefewerfittings

SPECIAL APPLICATIONS:

Boats: The flexibility of the Speedfit® System ensures it can be cabled easily around the interior and hidden from view.

RV: Speedfit® is ideal for RV installations due to its flexibility and its resistance to corrosion and freezing.

Exhibitions: The unique ability of the Speedfit® System to be easily disassembled and reused, together with its flexibility, makes Speedfit® ideal for this application.

Portable Buildings (offices, toilets): As with RV’s, Speedfit® is well suited for these applications.

Agricultural and Horticultural: Speedfit® has many ap-plications in agricultural and horticultural environments.

CTS SIZES

CTS SIZES

27

Sp

eedfit In

ch P

rod

ucts

Table of Contents for Speedfit Inch Products

For Industrial Products refer to Table of Contents on page 1For Speedfit Metric Products refer to Table of Contents on page 37

Standard Speedfit Fittings

PEI Fittings White plastic Twist & Lock fittings for use with domestic 32-33 hot and cold water lines

MWI & WBI Fittings Brass push-in fittings for use with domestic hot and cold 33 water lines

Special Speedfit Products

NC Fittings White plastic Twist & Lock fittings for use with hot and cold 35 water lines

NC Valves White plastic push-in straight shut-off valve; left and right hand 35 by-pass (Tee) valves for use with hot water & cold water lines.

Pipe and Accessories

US Pipe PEX pipe in coil and straight lengths, pipe inserts 34

Accessories Nail clips, pipe clips, pipe cutters and blades 35

Other

How to Make a Speeedfit Connection 28

Working Pressures and Temperatures 30

Technical Checklist 31

Index 43-44

ASTM F877-05 CSA B137.5 ASSE 1061

28

MAKING A GOOD CONNECTION:

Copper Pipe O-ring Spacer Collet Speedfit Pipe with Pipe Insert

Stainless Steel Teeth

Like our Standard Fittings, Twist and Lock Fittings have a collet with stainless steel teeth that grip the pipe when fully inserted, and an o-ring to provide a permanent leak-proof seal. The additional benefit of the Twist and Lock fitting is that a twist of the screw-cap gives greater compression on the o-ring seal and locks pipe in place for greater security.

Prepare the Pipe

To prevent damage to the o-ring remove all burrs and sharp edges. When using Speedfit® pipe, we recom-mend the use of Superseal Pipe Inserts. The insert should only be used with Speedfit® Pipe.

Stem of the pipe insert Spacer

Push pipe to pipe stop

The stem of the insert gives greater rigidity to the length of pipe within the fitting, reducing the chance of leaks if a side load is applied.

HOW TO MAKE A CONNECTION

Fittings and pipe should be kept clean, bagged, and undamaged before use.

TWIST AND LOCK FITTINGS

Gap between Cap and Flange (unlocked)

The fitting should be in the ‘unlocked’ position. This is shown by a small gap between the screw-cap and the body flange.

Pipe Stop O-ring Collet

Washer

Push the pipe into the fitting and up to the pipe stop.

Twist the screw-cap until it touches the body flange. This locks the pipe into position and increases the o-ring seal around the pipe.

No Gap (locked)

Pull to check that it is secure. It is good practice to test the system prior to leaving the site or before use. Our recommended test procedure is shown in our Technical Checklist.

Speedfit Pipe

PipeCutter JGHDC

29

CTS SIZES

TO DISCONNECT:

Ensure that the system is depressurized.

Be sure to twist the screw-cap back to the unlock position.

Push the collet square against the face of the fitting by using fingers. With the collet held in this position the pipe can be removed.

The fitting can be used again without the need for replacement parts. (Ensure the fitting is clean before every use).

WHAT NOT TO DO

• Don’tusedamagedorscoredpipe

• Don’tuseahacksawtocutthepipe

• Don’tleaveburrsontheendofthepipe

• Don’tforgettopushthepipefullyintothefitting,pastboth the collet (gripper) and the o-ring.

• Donotinsertfingersintothefittingasthestainlesssteel teeth may cause injury.

Remember to pressure test the completed installation according to the recommendations in our Technical Checklist.

END CAP

The unique feature of the Speedfit® concept is the ability to easily connect and disconnect the End Cap. End Caps also provide a leak-proof seal.

They can be used to temporarily “cap-off” in-stallations for pressure testing and rough in-spections.

With Speedfit® End Caps there is no need for tools, sweating or threading. They can be used with plastic or copper pipe, and are reusable many times over.

SUPERSEAL PIPE INSERT

Main O-ring Stainless Steel Teeth grip the pipe Washer

Pipe insert provides a secondary seal

O-rings

The Superseal pipe insert has been developed for use with Speedfit® Pipe and Speedfit® Fittings to provide an extra line of defense when installing a Speedfit® Push Fit System.

An o-ring at the head of the insert provides a second-ary seal inside the fitting. A combination of this and the fitting o-ring ensures an even better connection.

The Speedfit® Connection, when made with the Super-seal insert, has some innovative design and installation features:

Sliding the stem of the insert into the pipe gives greater rigidity to the length of the pipe within the fitting, reduc-ing the chance of leaks if a side load is applied.

A connection is easier to make because the head of the insert has been designed for ease of insertion.

30

STANDARDS AND AFFILIATIONS:

Speedfit® complies with the applicable sections of the latest edition of the Uniform Plumbing Code® and the International Plumbing Code®, including behind-the-wall installations.

Refer to the applicable code listings for the latest information.

Speedfit® products are manufactured in compliance with ASTM F 877-05, CSA B137.5, and ASSE 1061.

Speedfit® fittings & pipes have NSF/ANSI Standard 14 which demonstrates compliance with USA Plumbing Codes, cNSFus – which complies with Canada

and US Standards, CSA – Canadian Standards, pw – potable water, rfh – radiant floor heating, and NSF Stan-dard 61 Certification for Drinking Water System Compo-nents and Materials which contact drinking water.

John Guest quality systems have been ap-proved by the BSI EN ISO 9001.

The Genuine JG symbol represents our com-mitment to our customers, and what the John Guest name means to business: Quality, Re-liability, and Support.

The Speedfit® System is approved by the Water Regulations Advisory Scheme for the UK.

WORKING PRESSURES AND TEMPERATURES:

Application Max. Working Max. Working Pressure Temperature

Water 160 psi 73° F



HANDLING PIPE AND FITTINGS:

Ensure that the fittings and pipe are kept clean at all times by keeping them in the bags and box provided.

Do not empty Speedfit® products onto the floor area.

Be sure to keep the internal o-ring seals free from dirt and debris.

PRODUCT SELECTION AND INSTALLATION:

John Guest fittings and related products are specifically designed and manufactured by John Guest to the tech-nical specifications set out in the John Guest Product Catalogs. All John Guest fittings and related products should be selected, installed, used, and maintained in accordance with these Technical Specifications. It is the customer’s/user’s responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, are properly installed and main-tained, and are used in accordance with the Technical Specifications. It is also the customer’s/user’s respon-sibility to provide its own customers with any relevant technical information about John Guest products it sup-plies them.

Speedfit® should not be used for gas, fuel oil or compressed air applications.

John Guest produces a specially designed push fit sys-tem of pipe and fittings for compressed air installations. See separate literature for details.

PW rfh

31

CTS SIZESTECHNICAL CHECKLIST INCH SIZE PLUMBING AND HEATING FITTINGSFittings and pipe should be kept clean and undamaged before use.

• Sizes: 1/2” to 1” CTS.

• Pipes: Speedfit® fittings can be used with: PEX, Copper and CPVC Pipes conforming to ASTM Standards.

Speedfit® fittings cannot be used on stainless steel pipe.

• Standards: Speedfit® products are designed and manu-factured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. Speedfit® PEI Fittings and Speedfit®

PEX Pipe are also NSF-14, UPC, and CSA approved.

• Do not use for gas, fuel oil or compressed air applications.

• Working pressures and temperatures:

Application Max. Pressure Max. Temperature




• Burst Pressure (fittings): With copper or plastic pipe at 68° F, Speedfit® fittings used with copper or Speedfit® Pex Pipe will withstand pressures well in excess of normal ser-vice conditions.

• Insulation: Should comply with applicable standard for copper.

• Minimum bend radius (PEX):

Pipe diameter 1/2" CTS 3/4" CTS

Min radius 7" 9"

• Clip spacing (in inches): For surface mounted pipes.

Clip Spacing

Pipe Diameter Horizontal Run Vertical Run

1/2" CTS 16 inches 20 inches

3/4" CTS 20 inches 30 inches

1" CTS 30 inches 36 inches

• Expansion (PEX Pipe): 1% on length between 68° F and 180° F.

• Flow rates: Comparable with metal systems.

• Cleaners, inhibitors and descalents: For advice on the use of additives such as corrosion inhibitors, the additive manufacturers should be consulted

• Paint and Chemicals: Use only water-based paint. DO NOT ALLOW CONTACT WITH oil-based jointing com-pounds, cellulose-based paints, paint thinners, paint strip-pers, solder flux, acid-based descalents or aggressive cleaning products.

• Solder Flux: No fluxes of any type should come into contact with Speedfit® products. Extreme care should be taken to ensure that no such contact takes place.

• Chlorine: Speedfit® is not suitable for use in systems where the water contains high levels of chlorine, e.g. swim-ming pools, fountains, etc.

• Exposure to light: Speedfit® products, when used in-doors, are not affected by sunlight. When used outdoors, protect from ultraviolet light by lagging or painting.

• Pipe clips: Pipe clips should not be fitted any closer than 2 1/2 inches from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.

• Pipe inserts:

Plumbing: John Guest recommends the use of pipe inserts for PEX pipe connections with John Guest Speedfit® products in Standard Residential Plumbing (hot and cold water) installations.

Heating: John Guest requires the use of pipe inserts for PEX pipe connections with John Guest Speedfit® prod-ucts in all Heating installations.

• Metal Joists: When ‘cabling’ plastic pipe through metal joists, ensure rubber grommets are in place to prevent damage to the pipe.

• Connection to boilers: A minimum 36 inches run of cop-per pipe must be installed between the boiler and the Speedfit® system.

• Connection to copper pipe: 18 inches is the minimum distance to make a solder connection on copper pipe in-serted into a Speedfit® fitting. Ensure that no solder flux comes into contact with the fitting.

• Concrete and masonry: Speedfit® pipe and fittings can be laid in concrete and masonry providing they are in-stalled in conduit pipe with access boxes for the fittings. This is to enable the pipe to expand and provide acces-sibility for both pipe and fittings. Fittings and pipe should be removable for possible replacement. Insulation is also recommended to protect against heat loss and the effects of frost.

• Electrical Continuity: If Speedfit® is used in an existing metal system, electrical continuity must be reinstated.

• System Testing: To ensure the pipework and fittings have been installed correctly, whether it be on a new or extend-ed system, it is essential that the system be checked and hydraulically wet tested. Testing should be at 30 psi for 10 minutes and 150 psi for 10 minutes. This testing, combined with other relevant checks, should reveal installation prob-lems and is regarded as good plumbing practice. However, system testing should not be regarded as a substitute for correct installation (see also “Making a Good Connec-tion”).

• System flushing: As is usual practice for any plumb-ing installation, flushing of the system prior to the use of Speedfit® is recommended to remove any contaminants/chemical residue from elsewhere in the system.

• Vermin: Speedfit® products will need special protection in vermin infested areas.

Tube Insertion Depths:

Twist and Lock Fittings 1/2" CTS 3/4" CTS 1" CTS

Tube Insertion Depth 1 1/4" 1 5/8" 1 5/8"

End Caps 1/2" CTS 3/4" CTS 1" CTS


Brass Fittings 1/2" CTS 3/4" CTS 1" CTS


John Guest USA, Inc., is not responsible for misprints or typographical errors.

32

PLUMBING FITTINGS

UNION TEE

Part No. Size (CTS)

PEI0220 1/2"

PEI0228 3/4"

PEI0236 1"

UNION ELBOW

Part No. Size (CTS)

PEI0320 1/2"

PEI0328 3/4"

PEI0336 1"

COUPLER

Part No. Size (CTS)

PEI0420 1/2"

PEI0428 3/4"

PEI0436 1"

REDUCER

Part No. Size (CTS)

PEI062820 3/4" Stem x 1/2" Pipe

PEI063628 1" Stem x 3/4" Pipe

STEM ELBOW

Part No. Size (CTS)

PEI222020 1/2" Stem x 1/2" Pipe

PEI222828 3/4" Stem x 3/4" Pipe

Provides a swivel type connection

REDUCING TEE

Part No. Size (CTS)

PEI3028A 3/4" x 3/4" x 1/2"

PEI3028B 3/4" x 1/2" x 1/2"

PEI3028C 1/2" x 1/2" x 3/4"

PEI3028D 3/4" x 1/2" x 3/4"

Sizes for Reducing Tee are listed in the following order

1 2

3

END CAP

Part No. Size (CTS)

PEI4620 1/2"

PEI4628 3/4"

PEI4636 1"

Ideal for temporarily capping off pipes.

SLIM PROFILE END CAP

Part No. Size (CTS)

PSEI4620 1/2"

PSEI4628 3/4"

PSEI4636 1"

Easy to Connect Easy to Disconnect

33

CTS SIZES

STACKABLE TEE

Part No. Size (CTS)

PEI532020 1/2" x 1/2" x 1/2"

PEI532820 3/4" x 3/4" x 1/2"

PEI532828 3/4" x 3/4" x 3/4"

Ideal for multi-port manifold

FEMALE SWIVEL CONNECTOR

Part No. Size (CTS X NPS)

PEISTC2034 1/2" CTS x 1/2" NPS

FEMALE SWIVEL ELBOW

Part No. Size (CTS X NPS)

PEIBTC2034 1/2" CTS x 1/2" NPS

FEMALE BALLCOCK CONNECTOR

Part No. Size (CTS X Ballcock Thread)

PEISTC20C75 1/2" CTS x 7/8"-15/16" UNS

Connects to toilet fill valve.

FEMALE BALLCOCK ELBOW

Part No. Size (CTS X Ballcock Thread)

PEIBTC20C75 1/2" CTS x 7/8"-15/16" UNS

Connects to toilet fill valve.

BRASS MALE CONNECTOR

Part No. Size (CTS X NPT)

MWI012024 1/2" CTS x 1/2" NPT

MWI012826 3/4" CTS x 3/4" NPT

BRASS MALE STEM ADAPTER


MWI052024 1/2" CTS x 1/2" NPT

MWI052826 3/4" CTS x 3/4" NPT

BRASS FEMALE STEM ADAPTER

Part No. Size (CTS X NPSM)

MWI502034 1/2" CTS x 1/2" NPSM

BRASS FEMALE DROP EAR ELBOW


WBI2024 1/2" CTS x 1/2" NPT

New

Sizes for Stackable Tee are listed in the

following order

New

34

PIPE AND INSERTS

PEX PIPE

Part No. Size (CTS)

US1/2PEX-100F-W 1/2" x 100'

US3/4PEX-100F-W 3/4" x 100'

Coil Pipe in 100' Lengths

Pipe is also available in Red or Blue

W-denotes white color pipe

For Red and Blue pipe use suffix R or B

Part No. Size (CTS)

US1/2PEX-10X10-W 1/2"

US3/4PEX-10X10-W 3/4"

US1PEX-10X10-W 1"

Bundles of ten 10-foot lengths are also available in Red or Blue.

W-denotes white color pipe

For Red and Blue pipe use suffix R or B

*Availability pending approval.


Part No. Size (CTS)

STSI20 1/2"

STSI28 3/4"

To be used only with Speedfit® Pipe and Speedfit® Fittings to enhance the sealing security of the connec-tions.

PIPE INSERT

Part No. Size (CTS)

TSI20 1/2"

TSI28 3/4"

TSI36 1"

Pipe Inserts should only be used

with Speedfit® Fittings.

New

*

35

CTS SIZES

New

New

New

New

STRAIGHT SHUT-OFF VALVE 61

Part No. Size (CTS)

NC2390 1/2” CTS

BY-PASS VALVES 61

Part No. Size (CTS x 3 Way By-pass)

NC2391-RH 1/2" CTS x 3 Way By-Pass

NC2391-LH 1/2" CTS x 3 Way By-Pass

MALE CONNECTOR NPTF Thread 61

Part No. Size (CTS x NPTF)

NC2394 1/2" x 1/2" NPTF

NC2384 3/4" x 3/4“ NPTF

NC2420 1/2" x 3/4" NPTF

NC2421 1" x 3/4" NPTF

NC2422 1" x 1" NPTF

REDUCER 61

Part No. Size (CTS x TUBE OD)

PP062008W 1/2" CTS x 1/4" O.D.

PP062012W 1/2" CTS x 3/8" O.D.

PP062016W 1/2" CTS x 1/2" O.D.

ACCESSORIES

NAIL CLIP

Part No. Size (CTS)

NPCI20 1/2"

NPCI28 3/4"

PIPE CLIP

Part No. Size (CTS)

USCLIP20 1/2"

USCLIP28 3/4"

PIPE CUTTER

Part No.

JG-TS

HEAVY DUTY PIPE CUTTER

Part No.

JG HDC

BLADE JGHDC

Products on this page are not listed with IAPMO.

36

THE PUSH-FIT SOLUTION FOR PLUMBING SYSTEMS

John Guest plumbing push-fit fittings and pipe have been designed for the plumbing of hot and cold water service. Whether your application is for fresh water, raw water, gray water, or potable water; John Guest push-fit fittings and pipe meet the high demands of the Marine Industry.

STANDARDS AND AFFILIATIONS

WITH JOHN GUEST PLUMBING PRODUCTS YOU CAN EXPECT:

• Reductions in time and labor costs

• No tools required

• Efficient, quick connections (even in tight working spaces)

• Quick disconnections; can be used many times

• Suitable for Speedfit® PEX pipe, copper pipe and other good quality plastic pipes.

• No clamps or compression nuts to loosen due to vibration

• No sweating required

• Lightweight and easy to handle

• Use with hot or cold water

• Superior flow characteristics

• Lead free and non toxic

John Guest plumbing products should be installed to conform with good plumbing practice.

The products in this catalog should not be used for gas, fuel oil, compressed air applications, or residential plumbing.

METRIC SIZES

METRIC SIZES

37

Sp

eedfit M

etric Pro

du

ctsTable of Contents for Speedfit Metric Products

For Industrial Products refer to Table of Contents on page 1For Speedfit Inch Products refer to Table of Contents on page 27

Speedfit Fittings

PEM Fittings White plastic Twist & Lock fittings for use with hot and 39-40 cold water lines.

CM Connector Gray plastic push-in tank connector suitable for cold water lines 39

PSE Fitting White plastic push-in End Cap for use with hot and cold water lines 39

NC Connectors Gray plastic push-in conversion connectors for use with hot and 40 cold water lines

CM Connector Gray plastic push-in connector designed to connect pipe where 40 there is no lateral movement

Brass Fittings

MWI Fittings Brass push-in fittings suitable for use with hot and cold water lines 41

Valves and Manifolds

SFM Manifolds Gray push-in 4-way and Port Manifolds suitable for hot and cold 40 water lines

BSC and HSV Brass push-in Stop and Service Valves suitable for hot and 41 Brass Valves cold water Lines

HSV and PTSV Brass Chrome plated push-in Service Valve and valve with Tap 41 Valves Connector suitable for hot and cold water lines

APT and ESOT Tap White plastic push-in Washing Machine and Emergency Shut-Off Tap 41

DCV and ISV Gray plastic push-in Check and Service valves 41

STV valve White plastic push-in Stop Valve 41

JG Rail Brass push-in 4,6, and 12 zone manifolds suitable for hot and cold 41 Manifold water lines

JGMAN Manifold Brass push-in 2 and 3 port manifolds with blanking plug 41

Pipe and Accessories

BPEX Pipe White Plastic pipe in coils and straight lengths 42

Accessories Pipe Inserts, Collet Covers, Release Aids, Locking/ID Clips, Nail Clip, 42 Pipe Clip and Spacers, Conduit Pipe, Cold Forming Bend, Pipe Cutters and Blades

Other

Technical Checklist 38

Index 43-44

38

TECHNICAL CHECKLIST METRIC SIZE PLUMBING FITTINGSFittings and pipe should be kept clean and undamaged before use.

Do not use for gas, fuel oil or compressed air applications.

• Sizes: 10mm to 28mm outside diameter.

• Pipes: Speedfit® fittings can be used with: Speedfit® PEX Pipe, Copper pipe and other good quality plastic pipe

Speedfit® fittings cannot be used on stainless steel pipe.

• Working temperatures and pressures:

Application Max. Pressure Max. Temperature

Hot water 87 psi 150° F

Cold water 175 psi 68° F

• Burst Pressure (fittings). With copper or plastic pipe at 68°F. Speedfit® fittings used with copper or Speedfit®

(PEX) barrier pipe will withstand pressures well in excess of normal service conditions.

• High temperatures: Can withstand 237°F intermittently for short periods.

The Speedfit® system should not be used on an uncon-trolled heat source.

• Minimum bend radius (BPEX):

Pipe diameter 10mm 15mm 22mm 28mm

Min radius with clips 4" 7" 9" 12"

Min radius with cold forming bend

1 1/4" 3" 4 1/2"

• Clip spacing (in mm): For surface mounted pipes

Clip Spacing

Pipe Diameter Horizontal Run Vertical Run

10-15mm 16 inches 20 inches

22mm 20 inches 32 inches

28mm 32 inches 40 inches

• Expansion (PEX pipe): 1% on length between 68°F and 180°F.

• Flow rates: Comparable with metal systems.

• Paint and Chemicals: Use only water paint. Collet covers prevent paint ingress into fittings. DO NOT ALLOW CON-TACT WITH cellulose based paints, paint thinners or strip-pers, solder flux or acid based descalents or aggressive cleaning products.

• Exposure to sunlight: Speedfit® products, when used indoors, are not affected by sunlight. When used outdoors protect from ultraviolet light by lagging or painting.

• Pipe clips: Pipe clips should not be fitted any closer than 2-1/2” from the end of the fitting. Pipe should be adequate-ly supported by pipe clips to prevent undue stress (side load) on fittings.

• Pipe inserts: Must be used on all installations when using plastic pipe and should be fully inserted.

• Connection to copper pipe: 18" is the minimum distance to make a solder connection on copper pipe inserted into a Speedfit® Fitting. Ensure that any residual flux and solder does not come into contact with the fitting.

• Valves and Taps: Plastic 15mm and 22mm valves and taps available from John Guest are not suitable for central heating installations.

• Collet Covers/Locking Clips: Collet covers and locking clips provide added security against pipe disconnection, e.g. the fittings coming into contact with rigid surfaces and behind dry-lining walls. Collet Covers are available in white, or in red or blue to allow for color coding of pipes. Locking clips are available in gray.

• Residential Plumbing: John Guest metric range of plumbing fittings are not approved for use for residential plumbing.

• System testing: To ensure the pipework and fittings have been installed correctly, whether it be on a new or extend-ed system, it is essential that the system is checked and hydraulically wet tested. Testing should be at 30 psi for 10 minutes and 150 psi for 10 minutes. This testing, combined with other relevant checks, should reveal installation prob-lems and is regarded as good plumbing practice. However, system testing should not be regarded as substitute for correct installation (see Making a Good Connection).

• System flushing: As is usual practice for any plumb-ing installation, flushing of the system prior to the use of Speedfit® is recommended to remove any contaminants/chemical residue from elsewhere in the system.

• Maximum Torque Figures (BSP & BSPT & NPT): The maximum torque figures for BSP, BSPT, and NPT threads used on Speedfit® plumbing products in mating threads conforming to relevant BS or International thread stan-dards.

Threads Size Maximum Torque

Plastic1/2" 3.0 Nm

3/4" 4.0 Nm

Brass1/2" 4.0 Nm

3/4" 5.0 Nm

It is recommended that all installations are checked prior to use to determine that a seal has been made.

John Guest fittings and related products are specifically designed and manufactured by John Guest to the Technical Specifications set forth in John Guest’s Product Catalogs. All John Guest fittings and related product should be selected, installed, used and maintained in accordance with these Technical Specifications. It is the customer/user’s responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, are properly installed and maintained, and are used in accordance with Technical Specifications. It is also the customer’s/user’s responsibility to provide its own customers with any relevant technical information about John Guest products it supplies to them. If you would like to request a copy of the Technical Specifications, or if you have any questions about those Specifications, please contact John Guest USA at 1 (800) 945 4872, or visit the John Guest website at www.johnguest.com

39

METRIC SIZES

REDUCER

Part No. Stem OD Pipe OD mm mm

PEM061510W 15 x 10PEM062215W 22 x 15PEM062815W 28 x 15PEM062822W 28 x 22

TANK CONNECTOR

Part No. Pipe OD (mm)

CM0715S 15CM0722S 22CM0728S 28Suitable for cold water tanks only

END CAP


PSE4610W 10PSE4615W 15PSE4622W 22

METRIC PLUMBING FITTINGSJohn Guest Speedfit® reserve the right to change the color and shape of products. Photographs are for il-lustration purposes only.

Collet

Stainless Steel TeethCopper pipe Speedfit Pipe with Superseal Pipe Insert

‘O’ ring

Standard Speedfit Fittings have a collet with stain-less steel teeth to grip the pipe and an ‘O’ ring to provide a permanent leakproof seal.

The additional benefit of Twist and Lock Fittings is that a twist of a screwcap locks the pipe in posi-tion and gives greater compression on the ‘O’ ring for even greater security.

TWIST AND LOCK FITTINGS

STANDARD FITTINGS

Stainless Steel TeethCopper pipeSpeedfit Pipe with

Superseal Pipe Insert

‘O’ ring Collet

Sizes listed as follows.

1 2

3

Provides a swivel type connection

Requires hand tightening only.

UNION CONNECTOR


PEM0410W 10PEM0415W 15PEM0422W 22PEM0428W 28



PEM201510W 15 x 10PEM202215W 22 x 15

UNION ELBOW



PLUG-IN ELBOW

Part No. Pipe OD Stem OD mm mm

PEM221010W 10 10PEM221515W 15 15PEM222222W 22 22

Please note a Collet Cover cannot beused on a Speedfit end assembled with the stem of a 22mm Stem Elbow.

UNION TEE



REDUCING TEE


PEM3015AW 15 x 15 x 10PEM302210AW 22 x 22 x 10PEM3022AW 22 x 22 x 15PEM3015BW 15 x 10 x 10PEM3022BW 22 x 15 x 15PEM3022CW 15 x 15 x 22PEM3022DW 22 x 15 x 22PEM3028AW 28 x 28 x 22PEM3028BW 28 x 22 x 22PEM3028DW 28 x 22 x 28

40

FLEXI HOSE

Part No. Pipe OD Thread mm BSP

FLX15 15 x 1/2"FLX16 15 x 3/4"FLX22 22 x 3/4"

FLX18 15 x 1/2"FLX20 15 x 3/4"FLX19 22 x 3/4"

FLX23 22 x 3/4" Full BoreHot and Cold water only, 150°F maximum

FLEXI HOSE

Part No. Pipe OD Pipe OD mm mm

FLX17 15 x 15FLX26 22 x 22 FLX21 15 x 15FLX27 22 x 22

FLEXI HOSE WITH SERVICE VALVE


FLX24 15 x 1/2"FLX25 22 x 3/4"

FLX31 15 x 1/2"FLX32 22 x 3/4"

PLUG


PL10 10PL15 15PL22 22PL28 28

CONVERSION UNION CONNECTOR

Part No. Pipe OD Pipe OD

NC471 5/8” x 15mm

CONVERSION UNION CONNECTOR

Part No. Pipe OD Pipe OD

NC462 1/2” OD x 15mm

SLIP CONNECTOR

Part No. Pipe Od (mm)

CM-SC-15S 15Hot and Cold water only, 150°F maximum

Used to connect pipes where there is no lateral movement. Pipe passes through this fitting to allow connection where lateral movement is restricted.

BARB CONNECTOR

Part No. Pipe OD Hose ID mm inch

NC448-3/8 15mm x 3/8"NC448 15mm x 1/2"NC473 22mm x 3/4"NC737 22mm x 1/2"

STRAIGHT TAP CONNECTOR


PEMSTC1514 15 x 1/2"PEMSTC1516 15 x 3/4"PEMSTC2216 22 x 3/4"With brass swivel nut and sealing washer. For torque figures see Technical Checklist.

BENT TAP CONNECTOR


PEMBTC1514 15 x 1/2”With brass swivel nut and sealing washer. For torque figures see Technical Checklist.

4 WAY MANIFOLD


SFM512210S 22 x 10

4 PORT RAIL MANIFOLD


SFM522210S 22 x 10SFM522215S 22 x 15

300mm long

500mm long

300mm long

500mm long

FLEXI HOSES

300mm long

500mm long

Connects imperial to metric pipe

Connects imperial to metric pipe

41

METRIC SIZES

DOUBLE CHECK VALVE


15DCV 15Hot and Cold water only, 150°F maximum

PLASTIC SERVICE VALVE


15ISV 15Hot and Cold water only, 150°F maximum

BRASS SERVICE VALVE


15HSV-BRASS 15

BRASS CHROME PLATED SERVICE VALVE


10HSV 1015HSV 1522HSV 22

BRASS CHROME PLATED SERVICE VALVE WITH TAP CONNECTOR


15PTSV 15 x 1/2"22PTSV 22 x 3/4"

BRASS DRAIN COCK


15BDC 15Speedfit Drain Cocks cannot be used where collet covers are fitted. They can be used with a standard fitting fitted with a collet clip.

BRASS MANIFOLD

Part No. Description Size BSP x mm

Red HandleJGMAN2-R 2 PORT 3/4" x 15mmJGMAN3-R 3 PORT 3/4" x 15mmJGMAN4-R 4 PORT 3/4" x 15mmBlue HandleJGMAN2-B 2 PORT 3/4" x 15mmJGMAN3-B 3 PORT 3/4" x 15mmJGMAN4-B 4 PORT 3/4" x 15mm

GENERAL DESCRIPTIONBlanking plug supplied with each manifold.

Control knobs have the means to be labeled “Basin”, “Sink”, “Shower”, “Toilet”, “Bidet” or “Washing Machine”.

VALVESSTOP VALVE


15STV 1522STV 22Hot and Cold water only, 150°F maximum

BRASS STOP VALVE


15BSC 15Suitable for central heating only.

WASHING MACHINE TAP


15APT 15 x 3/4"Hot and Cold water only, 150°F maximum

For maximum torque figures on plastic thread, please see Technicaal Checklist.

EMERGENCY SHUT OFF TAP


15ESOT 15Hot and Cold water only, 150°F maximum

BRASS MALE CONNECTOR

Part No. Pipe OD Thread mm

MW011504N 15mm x 1/2" BSPTMW012206N 22mm x 3/4" BSPTMW012808N 28mm x 1" BSPT10MC (1/2) 10mm x 1/2" BSP15MC (1/2) 15mm x 1/2" BSP22MC (3/4) 22mm x 3/4" BSPMW012818N 28mm x 1" BSP

BRASS MALE STEM ADAPTER

Part No. Pipe OD Thread mm

MW051504N 15 x 1/2" BSPTMW052206N 22 x 3/4" BSPTMW052818N 28 x 1” BSPMM052226N 22 x 3/4" NPTMM052228N 22 x 1" NPTMM052828N 28 x 1" NPT

BRASS FEMALE STEM ADAPTER


MW501514N 15 x 1/2"MW502216N 22 x 3/4"

BRASS MALE CYLINDER ADAPTER


22CMA 22 x 1"Suitable for central heating systems.

BRASS FEMALE CYLINDER ADAPTER


22CFA 22 x 1”Suitable for central heating systems.

BRASS RAIL MANIFOLD


JGRAIL4 4 ZONE 22 x 15JGRAIL6 6 ZONE 22 x 15JGRAIL12 12 ZONE 22 x 15

Converts Speedfit to

female thread

Converts Speedfit to male thread

BRASS FITTINGS

Each manifold supplied with a blanking plug.

42

PIPE AND PIPE ACCESSORIESSpeedfit® BARRIER PIPE CROSS LINK POLYETHYLENE

Part No. Pipe OD Meter mm

10BPEX-25C 10 x 2510BPEX-50C 10 x 5010BPEX-100C 10 x 10015BPEX-25C 15 x 2515BPEX-50C 15 x 5015BPEX-100C 15 x 10022BPEX-25C 22 x 2522BPEX-50C 22 x 5028BPEX-10x3L 28 x 3

LLDPE TUBE

Part No. Pipe OD Meter mm

PE-1007-100M-N 10 x 100 NaturalPE-1007-100M-B 10 x 100 BluePE-1007-100M-E 10 x 100 BlackPE-1007-100M-R 10 x 100 Red

PE-15115-0100M-B 15 x 100 BluePE-15115-0100M-R 15 x 100 RedPE-15115-0100M-G 15 x 100 Green

PIPE INSERT


TSM10N 10TSM15N 15TSM22N 22TSM28N 28



STS10 10STS15 15STS22 22STS28 28

COLLET COVER


AM1915W 15PM1915R 15PM1915B 15AM1922W 22PM1922R 22PM1922B 22Available in white, red or blue

For use with standardSpeedfit fittings only.

LOCKING/IDENTIFICATION CLIP

Part No. Size (mm)

CM1810S Gray 10CM1815S Gray 15CM1822S Gray 22

To prevent accidental release of standard Speedfit fittings.

Also available in red or blue to provide color coding of pipe.

Red and blue collet clips should not be used to prevent accidental release

CM1810R, CM1815R, CM1822RCM1810B, CM1815B, CM1822B

RELEASE AID


10RA 1015RA 1522RA 22

Allows a firmer grip on the collet when removing pipe.

CONDUIT PIPE “Y”

Part No. Size (mm)

Black Conduit Pipe 15BLK CON-25C 15mm x 25mm15BLK CON-50C 15mm x 50mm22BLK CON-25C 22mm x 25mm22BLK CON-50C 22mm x 50mm

Coils

Bundle of Ten 3-meter lenghts

To be used when connecting Speedfit Pipe to a compres-sion fitting.Also for connecting LLDPE Tube to Speedfit Fittings

To be used with Speedfit Pipe and Speedfit fittings, to give enhanced sealing.

ID Clip

Locking Clip

Gray

COLD FORMING BEND


10CFB 10

15CFB 15

22CFB 22

To help create a tighter bend than the minimum unsupported pipe.

PIPE CLIPS AND SPACERS


PC15W 15PC22W 22PC28W 28

PCSW

NAIL CLIP


NPC10 10NPC15 15NPC22 22NPC28 28

PIPE CUTTER

Part No.

JG-TS

HEAVY DUTY PIPE CUTTER

Part No.

JG HDCBLADE JGHDC

EPDM ‘O’ RING


10 EPR 1015 EPR 1522 EPR 2228 EPR 28

For up to 22mm size pipe

For up to 28mm size pipe

10mm

15mm and 22mm

New

METRIC SIZES

43

1/4SCV 910 EPR 4210BPEX-100C 4210BPEX-25C 4210BPEX-50C 4210CFB 4210HSV 4110MC(1/2) 4110RA 4215 EPR 4215APT 4115BDC 4115BLK CON-25C 4215BLK CON-50C 4215BPEX-100C 4215BPEX-25C 4215BPEX-50C 4215BSC 4115CFB 4215DCV 4115ESOT 4115HSV 4115HSV-BRASS 4115ISV 4115MC(1/2) 4115PTSV 4115RA 4215STV 4122 EPR 4222BLK CON-25C 4222BLK CON-50C 4222BPEX-25C 4222BPEX-50C 4222CFA 4122CFB 4222CMA 4122HSV 4122MC(3/4) 4122PTSV 4122RA 4222STV 4128 EPR 4228BPEX-10X3L 423/8SCV 95/16SCV 9AM1915W 42AM1922W 42ASV3 14ASV4 14ASVPP1 13ASVPP2 13ASVPP5 13ASVPP6 13BLADE JGHDC 35, 42BLADES 23CI010821W 10CI010822W 10CI010823W 10CI011222W 10CI0208W 10CI0208WB 10CI0212W 10CI0308W 10CI0308WB 10CI0312W 10CI0312WB 10CI0312WR 10CI0408W 10CI0412W 10CI050821W 10CI050822W 10CI051222W 10CI051223W 10CI061208W 10CI1208W 10CI211206W 10CI220808W 10CI220808WB 10CI220808WR 10CI221208W 10CI221212W 10CI221212WB 10CI270808W 10CI2808W 16CI2812N 16

CI2820N 16CI291208W 10CI320814S 9CI3208U7S 9CI3210U7S 9CI321214S 9CI3212U7S 9CI480821W 10CI480822W 10CI480823W 10CI481222W 10CM0715S 39CM0722S 39CM0728S 39CM1810S 42CM1815S 42CM1822S 42CM2808N 16CM2815N 16CM2822N 16CM-SC-15S 40FLX15 40FLX16 40FLX17 40FLX18 40FLX19 40FLX20 40FLX21 40FLX22 40FLX23 40FLX24 40FLX25 40FLX26 40FLX27 40FLX31 40FLX32 40ICLT/2 23JG HDC 35, 42JGMAN2-B 41JGMAN2-R 41JGMAN3-B 41JGMAN3-R 41JGMAN4-B 41JGMAN4-R 41JGRAIL12 41JGRAIL4 41JGRAIL6 41JG-TS 23, 35, 42MI2806N 16MI2806ST 16MI2808N 16MI2808ST 16MI2812N 16MI2812ST 16MI2816N 16MI4508F4S 12MI4512F4S 12MI4512F6S 12MM052226N 41MM052228N 41MM052828N 41MM2804N 16MM2805N 16MM2806N 16MM2808N 16MM2808ST 16MM2810N 16MM2812N 16MW011504N 41MW012206N 41MW012808N 41MW012818N 41MW051504N 41MW052206N 41MW052818N 41MW501514N 41MW502216N 41MWI012024 33MWI012826 33MWI052024 33MWI052826 33MWI2820 15MWI2828 15MWI502034 33NC2098 12

NC2145 12NC2164 12NC2173 12NC2249 12NC2258 12NC2384 35NC2390 35NC2391-LH 35NC2391-RH 35NC2394 35NC2420 35NC2421 35NC2422 35NC356-02 9NC392-02 8NC448 12, 40NC448-3/8 40NC462 12, 40NC471 40NC473 40NC478 12NC641 9NC657 22NC730-02 9NC737 40NC869 12NC908 12NC932 12NCPI011211S 6NCPI011212S 6NPC10 42NPC15 42NPC22 42NPC28 42NPCI20 35NPCI28 35PC15W 42PC22W 42PC28W 42PCI2808S 16PCI2812S 16PCI2816S 16PCI2820 15PCI2828 15PCM2808S 16PCSW 42PE-04025-0100M-B 18PE-04025-0100M-E 18PE-04025-0100M-N 18PE-04025-0100M-R 18PE-0604-0100M-B 18PE-0604-0100M-E 18PE-0604-0100M-N 18PE-0604-0100M-R 18PE-0806-100M-B 18PE-0806-100M-E 18PE-0806-100M-N 18PE-0806-100M-R 18PE-0806-100M-W 18PE-08-BI-0500F-B 18PE-08-BI-0500F-E 18PE-08-BI-0500F-G 18PE-08-BI-0500F-N 18PE-08-BI-0500F-O 18PE-08-BI-0500F-R 18PE-08-BI-0500F-W 18PE-08-BI-0500F-Y 18PE-08-BI-1000F-B 18PE-08-BI-1000F-E 18PE-08-BI-1000F-G 18PE-08-BI-1000F-N 18PE-08-BI-1000F-O 18PE-08-BI-1000F-R 18PE-08-BI-1000F-W 18PE-08-BI-1000F-Y 18PE-1007-100M-B 18, 42PE-1007-100M-E 18, 42PE-1007-100M-N 18, 42PE-1007-100M-R 18, 42PE-10-CI-0500F-B 18PE-10-CI-0500F-E 18PE-10-CI-0500F-N 18PE-10-CI-0500F-R 18PE-1209-100M-B 18PE-1209-100M-E 18

PE-1209-100M-N 18PE-1209-100M-R 18PE-12-EI-0500F-B 18PE-12-EI-0500F-E 18PE-12-EI-0500F-G 18PE-12-EI-0500F-N 18PE-12-EI-0500F-O 18PE-12-EI-0500F-R 18PE-12-EI-0500F-V 18PE-12-EI-0500F-W 18PE-12-EI-0500F-Y 18PE-15115-0100M-B 18, 42PE-15115-0100M-G 18, 42PE-15115-0100M-R 18, 42PE-16-GI-0250F-B 18PE-16-GI-0250F-E 18PE-16-GI-0250F-N 18PE-16-GI-0250F-R 18PE-16-GI-0250F-W 18PEI0220 32PEI0228 32PEI0236 32PEI0320 32PEI0328 32PEI0336 32PEI0420 32PEI0428 32PEI0436 32PEI062820 32PEI063628 32PEI222020 32PEI222828 32PEI3028A 32PEI3028B 32PEI3028C 32PEI3028D 32PEI4620 32PEI4628 32PEI4636 32PEI532020 33PEI532820 33PEI532828 33PEIBTC2034 33PEIBTC20C75 33PEISTC2034 33PEISTC20C75 33PEM0210W 39PEM0215W 39PEM0222W 39PEM0228W 39PEM0310W 39PEM0315W 39PEM0322W 39PEM0328W 39PEM0410W 39PEM0415W 39PEM0422W 39PEM0428W 39PEM061510W 39PEM062215W 39PEM062815W 39PEM062822W 39PEM201510W 39PEM202215W 39PEM221010W 39PEM221515W 39PEM222222W 39PEM3015AW 39PEM3015BW 39PEM302210AW 39PEM3022AW 39PEM3022BW 39PEM3022CW 39PEM3022DW 39PEM3028AW 39PEM3028BW 39PEM3028DW 39PEMBTC1514 40PEMSTC1514 40PEMSTC1516 40PEMSTC2216 40PI010601S 6PI010602S 6PI010621S 6PI010801S 6

PI010802S 6PI010812S 6PI010821S 6PI010822S 6PI010823S 6PI0108F4S 6PI011202S 6PI011203S 6PI011212S 6PI011221S 6PI011222S 6PI011223S 6PI011224S 6PI0112C5S 6PI0112F4S 6PI0112F5S 6PI0112F6S 6PI0112F8S 6PI011603S 6PI011604S 6PI011623S 6PI011624S 6PI0116F8S 6PI012026S 6PI0206S 6PI0208S 6PI0212S 6PI0216S 6PI0306S 6PI0308S 6PI0312S 6PI0316S 6PI0406S 6PI0408S 6PI0412S 6PI0416S 6PI050601S 7PI050621S 6PI050801S 7PI050802S 7PI050821S 6PI050822S 6PI050823S 6PI051202S 7PI051203S 7PI051212S 7PI051213S 7PI051222S 6PI051223S 6PI051603S 7PI051604S 7PI051623S 6PI051624S 6PI060605S 7PI061006S 7PI061008S 7PI061206S 7PI061208S 7PI061210S 7PI061610S 7PI061612S 7PI0806S 7PI0808S 7PI0812S 7PI0816S 7PI090601S 7PI090621S 7PI090801S 7PI090802S 7PI090821S 7PI090822S 7PI091202S 7PI091203S 7PI091221S 7PI091222S 7PI091223S 7PI091603S 7PI091604S 7PI091622S 7PI091623S 7PI091624S 7PI100601S 7PI100621S 7PI100801S 7PI100802S 7

PI100821S 7PI100822S 7PI101202S 7PI101203S 7PI101222S 7PI101223S 7PI101603S 7PI101604S 7PI101623S 7PI101624S 7PI110601S 7PI110621S 7PI110801S 7PI110802S 7PI110821S 7PI110822S 7PI111202S 7PI111203S 7PI111222S 7PI111223S 7PI111603S 7PI111604S 7PI111623S 7PI111624S 7PI1206S 8PI1208S 8PI121208S 8PI1212S 8PI1216S 8PI131012S 8PI131216S 8PI1906S 23PI1908S 23PI1912S 23PI1916S 23PI200806S 8PI201006S 8PI201008S 8PI201206S 8PI201208S 8PI201210S 8PI201610S 8PI201612S 8PI211006S 8PI211008S 8PI211206S 8PI211208S 8PI211210S 8PI211610S 8PI211612S 8PI220606S 8PI220808S 8PI221206S 8PI221208S 8PI221210S 8PI221212S 8PI221616S 8PI2308S 8PI2312S 8PI2316S 8PI241210S 8PI250806S 8PI250808S 8PI250810S 8PI251006S 8PI251008S 8PI251012S 8PI251012SL 8PI251208S 8PI251210S 8PI251212S 8PI251212SL 8PI251216S 8PI251612S 8PI251616S 8PI2808S 16PI2808W 16PI2812S 16PI2812W 16PI2816S 16PI290808S 8PI290810S 8PI291008S 8PI291208S 8PI291210S 8

Part NumberFound On

Page(s) Part NumberFound On





Page(s)

44

PI301208S 8PI301612S 8PI450822S 9PI451014CS 9PI451014FS 9PI451015CS 9PI451015FS 9PI451213S 9PI451214CS 9PI451214FS 9PI451215CS 9PI451215FS 9PI451222S 9PI4512C5S 9PI4512F4S 9PI4512F6S 9PI451613S 9PI451614CS 9PI451615CS 9PI451615FS 9PI4516C5S 9PI4608S 9PI4612S 9PI4712S 9PI480821S 9PI480822S 9PI480823S 9PI481222S 9PI481223S 9PI482024S 9PI491612S 9PIC1808R 23PIC1812R 23PIC1816R 23PISV0412CS 14PISV0412S 14PISV0416S 14PIUB12S 9PIUB16S 9PL10 40PL15 40PL22 40PL28 40PM010401E 20PM010401S 6PM010402E 20PM010402S 6PM010411E 20PM010412E 20PM010421S 6PM010422S 6PM010501E 20PM010502E 20PM010511E 20PM010512E 20PM010601E 20PM010602E 20PM010611E 20PM010612E 20PM010622E 20PM010801E 20PM010801S 6PM010802E 20PM010802S 6PM010803E 20PM010803S 6PM010811E 20PM010812E 20PM010813E 20PM010821S 6PM010822S 6PM010823S 6PM0108C5S 6PM0108F5S 6PM011002E 20PM011003E 20PM011004E 20PM011012E 20PM011013E 20PM011014E 20PM011203E 20PM011204E 20PM011213E 20PM011214E 20PM0204E 20PM0204S 6

PM0205E 20PM0206E 20PM0208E 20PM0208S 6PM0210E 20PM0212E 20PM0304E 20PM0304S 6PM0305E 20PM0306E 20PM0308E 20PM0308S 6PM0310E 20PM0312E 20PM0404E 20PM0404S 6PM0405E 20PM0406E 20PM0408E 20PM0408S 6PM0410E 20PM0412E 20PM050401E 20PM050401S 7PM050402E 20PM050402S 7PM050411E 20PM050412E 20PM050421S 6PM050422S 6PM050501E 20PM050502E 20PM050511E 20PM050512E 20PM050601E 20PM050602E 20PM050611E 20PM050612E 20PM050801E 20PM050801S 7PM050802E 20PM050802S 7PM050803E 20PM050803S 7PM050811E 20PM050812E 20PM050812S 7PM050813E 20PM050821S 6PM050822S 6PM050823S 6PM051002E 20PM051003E 20PM051004E 20PM051012E 20PM051013E 20PM051014E 20PM051203E 20PM051204E 20PM051213E 20PM051214E 20PM060504E 21PM060604E 21PM060605E 21PM060804E 21PM060805E 21PM060806E 21PM061006E 21PM061008E 21PM061208E 21PM061210E 21PM061510E 21PM0804R 21PM0804S 7PM0805R 21PM0806R 21PM0808R 21PM0808S 7PM0810R 21PM0812R 21PM090401E 21PM090402E 21PM090411E 21PM090412E 21PM090421S 7PM090422S 7

PM090501E 21PM090502E 21PM090511E 21PM090512E 21PM090601E 21PM090602E 21PM090611E 21PM090612E 21PM090801E 21PM090801S 7PM090802E 21PM090802S 7PM090803E 21PM090803S 7PM090811E 21PM090812E 21PM090813E 21PM090821S 7PM090822S 7PM090823S 7PM091002E 21PM091003E 21PM091004E 21PM091012E 21PM091013E 21PM091014E 21PM091203E 21PM091204E 21PM091213E 21PM091214E 21PM100401E 21PM100402E 21PM100411E 21PM100412E 21PM100421S 7PM100422S 7PM100501E 21PM100502E 21PM100511E 21PM100512E 21PM100601E 21PM100602E 21PM100611E 21PM100612E 21PM100801E 21PM100801S 7PM100802E 21PM100802S 7PM100803E 21PM100803S 7PM100811E 21PM100812E 21PM100813E 21PM100821S 7PM100822S 7PM100823S 7PM101002E 21PM101003E 21PM101004E 21PM101012E 21PM101013E 21PM101014E 21PM101203E 21PM101204E 21PM101213E 21PM101214E 21PM110401E 21PM110402E 21PM110411E 21PM110412E 21PM110421S 7PM110422S 7PM110501E 21PM110502E 21PM110511E 21PM110512E 21PM110601E 21PM110602E 21PM110611E 21PM110612E 21PM110801E 21PM110801S 7PM110802E 21PM110802S 7PM110803E 21PM110803S 7

PM110811E 21PM110812E 21PM110813E 21PM110821S 7PM110822S 7PM110823S 7PM111002E 21PM111003E 21PM111004E 21PM111012E 21PM111013E 21PM111014E 21PM111203E 21PM111204E 21PM111213E 21PM111214E 21PM1204E 22PM1204S 8PM1205E 22PM1206E 22PM1208E 22PM1208S 8PM1210E 22PM1212E 22PM130405E 22PM1904E 23PM1904S 23PM1905E 23PM1906E 23PM1908E 23PM1908S 23PM1910E 23PM1912E 23PM1915B 42PM1915E 23PM1915R 42PM1918E 23PM1922B 42PM1922E 23PM1922R 42PM200604E 22PM200804E 22PM200804S 8PM200806E 22PM201004E 22PM201006E 22PM201008E 22PM201208E 22PM201210E 22PM210604E 22PM210804E 22PM210804S 8PM210806E 22PM211004E 22PM211006E 22PM211008E 22PM211208E 22PM211210E 22PM220404E 22PM220404S 8PM220505E 22PM220606E 22PM220808E 22PM220808S 8PM221010E 22PM221212E 22PM2304E 22PM2308E 22PM2308S 8PM250604E 22PM250806E 22PM250808S 8PM251008E 22PM2608S 23PM2610S 23PM2804S 16PM2806E 16PM2808E 16PM2808S 16PM2808W 16PM2810E 16PM290808S 8PM3022AE 22PM450411E 22PM450612E 22PM450812E 22

PM4508C5S 9, 22PM4508F4S 9, 22PM4612E 22PM480621E 22PM480622E 22PM480623E 22PMC1808R 23PMC1815R 23PMUB15E 22PP010821W 4PP010822W 4PP010823W 4PP011222W 4PP011223W 4PP011224W 4PP011623W 4PP011624W 4PP0208W 4PP0212W 4PP0216W 4PP0308W 4PP0312W 4PP0316W 4PP0408W 4PP0412W 4PP0416W 4PP050821W 4PP050822W 4PP051222W 4PP051223W 4PP051623W 4PP051624W 4PP061208W 4PP061612W 4PP062008W 4, 35PP062012W 4, 35PP062016W 4, 35PP0808W 4PP0812W 4PP0816W 4PP090821W 4PP090822W 4PP091222W 4PP091223W 4PP100821W 4PP100822W 4PP101222W 4PP101223W 4PP110821W 5PP110822W 5PP111222W 5PP111223W 5PP1208W 5PP121208W 5PP1212W 5PP1216W 5PP201208W 5PP201612W 5PP211008W 5PP211208W 5PP211612W 5PP220808W 5PP221208W 5PP221212W 5PP221616W 5PP2312W 5PP251212W 5PP251216W 5PP251612W 5PP251616W 5PP2808W 16PP2812W 16PP30120812W 5PP30121208W 5PP301612W 5PP3208U7W 5PP3212U7W 5PP450821W 5PP450822W 5PP451222W 5PP451223W 5PP480821W 5PP480822W 5PP480823W 5PP481222W 5PP481223W 5

PPM0208W 4, 19PPM0212W 19PPM0308W 4, 19PPM0312W 19PPM0408W 4, 19PPM0412W 19PPM061512W 19PPM0808W 4, 19PPM201512W 19PPM220808W 5, 19PPM221212W 19PPM2312W 19PPSV010822W 14PPSV011223W 14PPSV040808W 14PPSV041212W 14PPSV500822W 14PPSV501222W 14PSE4610W 39PSE4615W 39PSE4622W 39SFM512210S 40SFM522210S 40SFM522215S 40SI030812S 11SI031012S 11SI031210S 11SI031212S 11SI041012S 11SI041210S 11SI041212S 11SI270808S 11SI271008S 11SI271208S 11SI401210S 11SI401212S 11SI421012S 11SI421210S 11SI421212S 11SM010802S 11SM010812S 11SM0108F4S 11SM0108F6S 11SM030808S 11SM040808S 11SM400808S 11SM410808E 11SM420808S 11SPAN1 11STS10 42STS15 42STS22 42STS28 42STSI20 34STSI28 34SVMC-10 14TSI20 34TSI250S 23TSI28 34TSI312S 23TSI36 34TSI375S 23TSM10N 23, 42TSM15N 23, 42TSM22N 23, 42TSM28N 42TSNIP 23TSPITOOL 23US1/2PEX-100F-B 34US1/2PEX-100F-R 34US1/2PEX-100F-W 34US1/2PEX-10X10-B 34US1/2PEX-10X10-R 34US1/2PEX-10X10-W 34US1PEX-10X10-B 34US1PEX-10X10-R 34US1PEX-10X10-W 34US3/4PEX-100F-B 34US3/4PEX-100F-R 34US3/4PEX-100F-W 34US3/4PEX-10X10-B 34US3/4PEX-10X10-R 34US3/4PEX-10X10-W 34USCLIP20 35USCLIP28 35WBI2024 33

Part NumberFound On






Page(s)

Terms and ConditionsThe products described in this document are hereby offered for sale to be established by John Guest (USA) Inc.,

its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (the “Buyer”) shall be

governed by all of the following Terms and Conditions. Buyer’s order for any item described in this document, when

communicated to John Guest (USA) Inc., its subsidiaries or an authorized distributor (the “Seller”) verbally or in

writing, shall constitute acceptance of this offer.

1. Terms and Conditions of Sale. All descriptions, quotations, proposals, offers, acknowledgments, acceptances

and sales of the Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated

herein (the “Agreement”). The Buyer’s acceptance of any offer to sell is limited to the terms and conditions in the

Agreement. Any terms or conditions in addition to, or inconsistent with those stated in the Agreement, proposed by

the Buyer in any acceptance of an offer by the Seller, are hereby objected to. No such additional, different or inconsistent

terms and conditions shall become part of the agreement between the Buyer and the Seller unless expressly accepted

in writing by the Seller. The Seller’s acceptance of any offer to purchase by the Buyer is expressly conditioned upon

the Buyer’s assent to all the terms and conditions in this Agreement, irrespective of any terms in addition to, or

inconsistent with those contained in the Buyer’s offer. Acceptance of the Seller’s products shall in all events constitute

such assent.

2. Documents. Unless provided otherwise in the Agreement, all catalog descriptions, illustrations, drawings and

literature or independently submitted estimates of performance, weights and measurements or other specifications

provided by the Seller are mere approximations and the Seller reserves the right to alter or amend the same at any

time. The Seller reserves the right to correct clerical or technical errors in the contract documents. The Buyer shall

furnish with his order all necessary specifications and information. The Seller takes no responsibility for goods

manufactured, priced or delivered not in accordance with the order or the specifications unless the Buyer’s order and

specifications are clear and correct.

3. Prices. Unless otherwise provided, all prices contained in our quotations and written acceptances are ex works

and do not include the cost of packing. All orders are accepted on the condition that all such prices are subject to

revision by the Seller at any time before the goods are dispatched to take account of any price change. In the event

that the Buyer does not place the entire order quoted by the Seller for the Buyer, the Seller reserves the right to revise

its prices. The Seller also reserves the right to revise its prices if the Buyer modifies the specification or quantity of the

goods, or the delivery requirements after the order has been accepted by the Seller.

4. Advice. All advice given in connection with the Seller’s goods is provided without charge to the Buyer. Any advice

and assistance given by the Seller to the Buyer is given at the Buyer’s risk and the Seller shall not be liable for any

loss, damage or claim arising therefrom.

5. Payment. (a) Unless otherwise provided in the Agreement, or explicitly agreed upon in writing by the Seller, pay-

ment is due in full 30 days from date of shipment of the items purchased herein under. (b) In the case of an installment

contract, deliveries or parts, payment for each installment delivery or part shall be made under subclause (a) as if the

same constituted a separate agreement. (c) Amounts not timely paid shall bear interest at the rate of 2-1/2% above

the Seller’s bank’s prime rate from time to time in force. (d) In the event that the Buyer fails within one calendar month

of the date for payment to effect any payment which may be due under the Agreement or any agreement with the

Seller, or if the Buyer commits any breach of the Agreement, or if the Buyer becomes insolvent or commits any act of

bankruptcy or contemplation of liquidation, the Seller will be entitled, without prejudice to the Seller’s other rights, to

terminate the Agreement or any unfulfilled part thereof, or at the Seller’s option to make partial deliveries.

6. Modifications and Cancellations. This Agreement is not subject to oral modification or cancellation. A Buyer’s

request for modification or cancellation will not be incorporated into the Agreement unless the request is accepted by

the Seller in a writing that amends the Agreement. Acceptance of any such requested modification or cancellation shall

be at the Seller’s discretion and shall be upon such terms and conditions as the Seller may require.

7. Handling Charge. Goods supplied in accordance with the Buyer’s order may later be returned to the Seller at the

Seller’s discretion provided the return is pre-authorized, in writing and the merchandise is unused, in original packages,

unaltered, clean and no older than 60 days from the date of shipment by the Seller. The Buyer will be required to pay

to the Seller a handling charge of 15% of the purchase price of the returned goods. A copy of the original invoice for

the merchandise must accompany all returns.

8. Delivery. (a) Any delivery dates quoted are approximate only and the Seller shall have no liability for any delays in

delivery. (b) Unless provided otherwise, delivery of the goods shall be made when the Seller has notified the Buyer

that the goods are ready for dispatch. Regardless of the method of delivery, delivery shall be made F.O.B. Seller’s

plant, where the risk of loss shall thereupon pass to the Buyer upon the Seller’s delivery to a carrier. Notwithstanding

that the Seller’s prices are ex-works, the Seller is prepared by special contract to procure carriage or freight and

insurance on behalf of the Buyer and at Buyer’s cost in which event the Seller shall be under no liability for damage

in transit or loss or damage to the goods beyond the point at which the Seller contracts to deliver the same. (c) Seller

will not make drop shipments.

9. Inspection and Rejection. (a) The following provisions shall apply in relation to all deliveries of goods: the

Seller shall not be held liable for any claims of damage in transit, shortage of delivery or loss of goods, unless

in the case of shortage of delivery, a separate notice in writing is given to the carrier concerned and to the

Seller within three (3) days of the receipt of the goods, followed by a complete claim in writing within five (5)

days of receipt of the goods and in the case of loss of goods, a separate notice in writing is given to the car-

rier concerned and to the Seller and a complete claim in writing made within thirty (30) days of the date of

consignment. The Buyer must inspect the goods on arrival from the carrier, however, where goods are accepted

from the carrier concerned without being inspected, the delivery book of the carrier concerned must be signed “not

examined”. The Seller shall have the right to inspect the goods at the Buyer’s premises in respect to any such claims

made by the Buyer and the Buyer shall retain such goods until the Seller has inspected such goods or until the Seller

has notified the Buyer that the Seller does not wish to inspect such goods. Any breach of these conditions in this

provision shall serve as a waiver to any claim brought by the buyer. (b) Without prejudice to the Seller’s other rights,

should the Buyer fail for any reason to send the Seller forwarding instructions within ninety (90) days after the date of

the Seller’s notification that the goods are ready for dispatch or to accept delivery of the goods, the Seller shall be

entitled at the Buyer’s risk and expense to store the goods and/or to procure or effect storage of the goods elsewhere.

Goods so stored shall be paid for as if they had been dispatched and/or accepted.

10. Special Tooling. Where it is necessary for the Seller to manufacture or to purchase special tooling, including

without limitation tools, dies, jigs, mandrills, fixtures, molds, and patterns in order to execute a contract, the Buyer will

be charged with a proportion of the cost of such special tools. Such special tooling shall be and remain the Seller’s

property notwithstanding payment of any charges made by the Buyer. In no event will the Buyer acquire any interest

in apparatus belonging to the Seller which is utilized in the manufacture of the items sold hereunder, even if such

apparatus has been specially converted or adopted for such manufacture and notwithstanding any charges paid by

the Buyer therefor. Unless otherwise agreed, the Seller shall have the right to alter, discard or otherwise dispose of

any special tooling or other property in its sole discretion at any time.

11. Test and Performance. (a) The Seller’s goods are, where practicable, submitted to the Seller’s standard test before

delivery. If special tests are required, these shall be made at the Seller’s premises unless otherwise agreed, and will be

subject to an extra charge. (b) The Seller accepts no liability for failure to attain any performance figures quoted by the

Seller unless the Seller specifically has guaranteed them with an agreed sum as liquidation damages and the Buyer

has suffered actual loss by reason of the failure to attain the figures quoted. (c) Any particulars of weights and

measurements, power and consumption, power output or performance relating to the goods and like matters furnished

by the Seller to the Buyer in the Seller’s catalogs, literature or otherwise, are approximate and are intended only to

present a general idea of the goods to be supplied and unless previously agreed specifically in writing shall not form

part of the Agreement.

12. Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment

furnished to the Seller by the Buyer, or any other items which become the Buyer’s property, may be considered

obsolete and may be destroyed by the Seller after two (2) consecutive years have elapsed without the Buyer placing

an order for the items which are manufactured using such property. The Seller shall not be responsible for any loss or

damage to such property while it is in the Seller’s possession or control.

13. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational

or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold

hereunder. If any such taxes must be paid by the Seller, or if the Seller is liable for the collection of such tax, the amount

thereof shall be in addition to the amounts for the item sold. The Buyer agrees to pay all such taxes or to reimburse the

Seller therefor upon receipt of its invoice. If the Buyer claims exemption from any sales, use or other tax imposed by

any taxing authority, the Buyer shall promptly indemnify and hold the Seller harmless from and against any such tax,

as well as any interest or penalties thereon which may be assessed if the items are held to be taxable.

14. Warranty. (a) The Seller warrants that the items sold hereunder shall be free from defects in material or workmanship

at the time of shipment by the Seller. The Seller warrants that if within 12 months of delivery of the goods to the Buyer

the Buyer returns immediately to the Seller’s premises any of the said goods which the Buyer believes to be defective,

carrier paid, properly packed and clearly marked with the Buyer’s full name and address and any other information

such as serial numbers which may be necessary to enable the goods to be identified, together with a complete

description of the respects in which it is alleged that the goods are defective, they will be repaired or new goods will

be supplied in exchange and the goods so repaired or such new goods will be delivered to the Buyer free of charge

at the Seller’s premises provided that the foregoing warranty shall only be applicable if upon demand by the Seller,

the Buyer proves to the Seller’s satisfaction: (i) that the defect was due solely to defective workmanship; (ii) that no

alterations or repairs have been made to the goods except with the Seller’s written consent; (iii) that the defect was

not caused by any act of the Buyer or its agents; and (iv) that the defect was not caused by any matter beyond the

reasonable control of the Seller, including, without limitation, accident or normal wear and tear. (b) For John Guest PEI

and MWI Series Plumbing products only, the warranty periodcontained in sub-paragraph (a) may be extended to 120

months from date of delivery of the goods to the Buyer provided that, in addition to all other requirements, Seller’s

products are: (i) used in domestic plumbing applications or potable water related OEM/equipment installations; (ii) a)

Installed by a Licensed Contractor, Plumber or qualified equipment installation professional; or b) OEM factory installed

by a trained professional; c) Installed and operated in accordance with published John Guest technical specifications.

(c) All costs and expenses, including freight charges, customs duties, and insurance incurred in returning the goods to

the Seller’s premises in accordance with this provision shall be paid by the Buyer. The benefit of this warranty shall not

be assignable by the Buyer. (d) The warranty contained in sub-paragraph (a) above does not extend to any goods not

manufactured by the Seller even though supplied by the Seller nor does it extend to any second-hand or reconditioned

goods nor does it extend to components manufactured by the Seller but installed, attached or welded by the Buyer

or his customer on equipment not manufactured by the Seller. Goods not manufactured by the Seller carry only the

warranty (if any) of their makers and the Buyer is entitled to the benefit thereof only so far as the Seller has

the power to transfer it. (e) This warranty comprises the sole and entire warranty pertaining to items provided

hereunder, the Seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other

warranties, including but not limited to, merchantability and fitness for purpose, whether expressed or implied, or

arising by operation of law, trade usage, or course of dealing are hereby disclaimed. (f) Notwithstanding the foregoing,

there are no warranties whatsoever on items built or acquired wholly or partially to the Buyer’s designs or specifica-

tions.

15. Limited Remedy. The Seller’s liability arising from or in any way connected with the items sold or this Agreement

shall be limited exclusively to repair or replacement of the items sold. In no event shall the Seller be liable to the Buyer

or any 3rd party for any incidental, consequential or special damages of any kind or nature whatsoever, including but

not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether

alleged to arise from breach of contract, express or implied warranty, or in tort, including without limitation, negligence,

failure to warn or strict liability.

16. Indemnity for Infringement of Intellectual Property Rights. (a) The Buyer shall defend and indemnify the

Seller against all actions, claims, demands, penalties and costs by 3rd parties in tort, or for infringement, or alleged

infringement, of patents, trademarks, copyrights, trade dress, trade secret or other rights of any 3rd party resulting

from the goods manufactured in accordance with the Buyer’s specifications or based on any information provided by

the Buyer. The Buyer will defend any action against the Seller for title, patent, trademark, copyright infringement, or

other claimed by a 3rd party at the Buyer’s sole cost and expense. (b) The Seller shall have no liability for infringement

of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this provision.

The Seller will defend and indemnify the Buyer against allegations of infringement of US patents, US trademarks,

copyrights, trade dress and trade secrets (“Intellectual Property Rights”). The Seller will defend at its expense and will

pay the cost of any settlement or damages awarded in an action brought against the Buyer based on an allegation that

an item sold pursuant to this contract infringes the Intellectual Property Rights of a 3rd party. The Seller’s obligation

to defend and indemnify the Buyer is contingent on the Buyer notifying the Seller within 10 days after sole control

over the defense of any allegations or actions, including all negotiations for settlement or compromise. If an item sold

hereunder is subject to a claim that it infringes the Intellectual Property Rights of a 3rd party, the Seller may, at its sole

expense and option, procure for the Buyer the right to continue using said item, replace or modify said item so as to

make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance

for depreciation. Notwithstanding the foregoing, the Seller shall have no liability for claims of infringement based

on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in

combination or use in a system of any item sold hereunder. The foregoing in this provision shall constitute the Seller’s

sole and exclusive liability and the Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights.

17. Lien. In addition to any right of lien to which the Seller may by law be entitled, the Seller shall have a general

lien on all goods of the Buyer in the Seller’s possession (although such goods or some of them may have been

paid for) for the unpaid price of any other goods sold and delivered to the Buyer by the Seller under the same or

other contracts.

18. Waiver. The Seller’s rights shall not be affected or restricted by any indulgence or forbearance granted to the

Buyer. No waiver by the Seller of any breach shall operate as a waiver of any later breach.

19. Force Majeure. The Seller shall be excused from performing any of its obligations under this Agreement which

are prevented or delayed by any occurrence not within the reasonable control of the Seller, including but not limited

to, accidents, acts of God, destruction or damage to the goods or the Seller’s manufacturing plant, delays or failures

in delivery of carriers or suppliers, shortages of materials, strikes or other labor matters, floods, earthquakes, fire,

riots, explosions, or any regulations, rules, ordinances or orders of any governmental authority, federal, state or local,

whether such cause exists at the date of the order or not.

20. Buyer’s Representation of Solvency. The Buyer hereby represents that as of the signing of this Agreement it was

not insolvent within the meaning of the Uniform Commercial Code or the Bankruptcy Laws of the United States.

21. Assignment and Delegation. The rights and obligations of the parties under this Agreement may not be assigned

or delegated, except on the express written consent of the other party to the assignment or delegation.

22. Integration. The rights and obligations of the parties and the terms and conditions set forth herein, together with

any amendments, modifications and any different terms and conditions expressly accepted by the Seller in writing,

shall constitute a complete and exclusive statement of the terms of this Agreement. This Agreement supersedes not

only all prior agreements, but also oral agreements made contemporaneously with the execution of this Agreement.

All such materials may not be used to supplement, explain, or contradict the terms of this Agreement.

23. Severability. If any of these conditions or any part thereof purports to exclude or restrict or limit any liability and

such exclusion or restriction or limitation is prohibited or rendered void or unenforceable by any legislation to which

it is subject, or is itself prohibited or rendered void or unenforceable by any legislation to which it is subject, then the

exclusion restriction or limitation on the condition or part thereof in question shall be so prohibited or rendered void or

unenforceable and the validity or enforceability of any other part of these provisions shall not thereby be affected.

24. Governing Law/Limitation on Actions. The terms, conditions, rights, and obligations under this Agreement shall

be construed under the laws of the State of New York, without regard to principles of conflicts of laws. No actions

arising out of the sale of the items sold hereunder or this Agreement may be brought by the Buyer more than two

(2) years after such cause of action accrues.

John Guest USA, Inc. Terms & Conditions of Sale Rev. 4/06

John Guest Ltd.Horton Road, West Drayton, Middlesex, UB7 8JL, England.Tel: (44) (1) (895) 449233 Fax: (44) (1) (895) 420321

John Guest France S.A.143-147 Avenue Charles Floquet, Parc Gustave Eiffel, 93593 Le Blanc Mesnil, Cedex, FRANCE.Tel: (33) (1) 48 65 52 29 Fax: (33) (1) 48 65 43 40

John Guest GmbHLudwig-Erhard-Allee 30, D-33719 Bielefeld, GERMANYTel: (49) (521) 972 560 Fax: (49) (521) 972 5680

John Guest Pacific LtdP.O. Box 19553, 606 Rosebank Road, Avondale, Auckland, NEW ZEALAND.Tel: (64) (9) 8281353 Fax: (64) (9) 828 5927

John Guest s.r.l.Via Vicenzo Lancia 13, 10038 Casabianca-Verolengo (Torino), ITALY.Tel: (39) (011) 957 5880 Fax: (39) (011) 957 6144

John Guest s.l.C/ de La Electronica No.7, Poligono Industrial La Ferreria,Montcada i Reixac, 08110 Barcelona, SPAIN.Tel: (34) (93) 575 0027 Fax: (34) (93) 575 0178

John Guest Korea LtdUnit 552-27 Kajwa Dong, Seo Ku, Incheon City, 404-812 Korea.Tel: (82) (32) 584 3370 Fax: (82) (32) 584 3372

John Guest Pacific LtdUnit 6, 33 Nyrang Street, Lidcombe, SydneyN.S.W. 2141, AUSTRALIA.Tel: (61) (2) 9737 9088 Fax: (61) (2) 9737 9122

ˇJohn Guest Czech s.r.o.Vrbenska 2290, CZ - 37001 Ceske Budejovice, CZECH REPUBLIC.Tel: (420) (387) 002 040 Fax: (420) (387) 002 048

ˇ

John Guest Polska Sp. z.o.o.Ul. Starolecka 7, 61-361, Poznan, POLAND.Tel: (48) (61) 87 80 408 Fax: (48) (61) 87 80 285

John Guest USA Inc. 180 Passaic AvenuePO Box 11085Fairfield, NJ 07004Tel: 973-808-5600Toll Free: 1-800-94-JG USAFax: 973-808-5036Toll Free Fax: 1-877-77-JG FAXWeb: www.johnguest.comEmail: [email protected]

and are registered trademarks of John Guest International Limited © Copyright 2008.

John Guest USA, a world-leading supplier of Fluid

System Products, located in Northern New Jersey

is part of a progressive and professional organization

with multiple locations worldwide. For over 30 years

the John Guest organization has built its reputation by

providing high quality products and high levels of

customer service.

Through a strong commitment to growth and innova-

tion, John Guest USA will continue to serve its com-

munity and customers well into the future.

John Guest USA, Inc. distributes its products across

North, Central, and South America, the Caribbean,

and the US Virgin Islands.

APPROVED MATERIALS NSF 51NSF 61

John Guest Companies