FMC Fluid Control Flowline Products - Catalog

8/10/2019 FMC Fluid Control Flowline Products - Catalog

1/20

Man

ufa cturing

Ce

rtifi c a t i o

n

Quality

Systems

ISO-9001

FMC Fluid Control DivisionFlowline Products

Catalog FP-11/96

World Proven Chiksan

, Weco

& Dynetor

Products


2/20

Contents

Chiksan Swivel Joints .................................................................. 1

Chiksan Cementing & Circulating Hoses .................................... 4

FMC Swing Joints ....................................................................... 5

Dynetor Connectors..................................................................... 6

Weco Wing Unions ..................................................................... 8

Weco Integral Pup Joints ........................................................... 11

FMC Integral Fittings ................................................................ 11

Weco Butterfly Valves, Operators & Actuators ......................... 12

FMC Plug Valves, Operators & Actuators ................................. 14

Chiksan Mud Mixing Guns ....................................................... 15

FMC Check Valves ................................................................... 15

FMC Manifolds ......................................................................... 16

FMC Pressure Relief Valves ..................................................... 16

FMCis the worlds largest supplier of fluid controlproducts to the oilfield industry and is the standard against whichall others are measured. From its original Chiksan and Weco

products to the revolutionary Dynetor technology 65 years later,

FMC has a long tradition of excellence. Todays FMC is

continuing this tradition by anticipating and responding to your

needs in more ways than ever.

The industrys most rigorous research, development, and

testing:FMC is investing millions of dollars to find new and

improved ways of meeting changing customer and industry

requirements. This ongoing effort is resulting in a host of new

products and refinements to existing products.

Quality approval and certifications second to none:FMCs

Quality System has been surveyed and approved by DNV and

ABS and meets ISO 9001, NS-ISO 9001, and BS 5750 Part 1

standards. All Chiksan, Weco, and Dynetor products can be

supplied with both type and case approval from DNV, Lloyds,

ABS, and others. Complete material certification and traceability

are also available.

The products you need, when and where you need them:

FMC manufactures and distributes Chiksan, Weco, and Dynetor

products from more than 60 locations around the world. These

facilities stock FMC products in the specific sizes, pressures, and

materials used in your area.

Worldwide parts and service just a phone call away:FMC

maintains parts and service facilities in every major oil and gasproducing segment of the world. FMC trained personnel provide

all the technical assistance, field support, and after sales service

youll ever need.

FMC Fluid Control Division...Continuing the Tradition

Refer to FMC product catalogs, product brochures and installation,

operating and maintenance manuals for additional product safety

information or contact FMC at 800/772-8582.


3/201

Style 20Single swivel coupling

Style 30Single swivel with one elbow

Style 40Single swivel with two elbows

No.4No. 5

Style 50Two swivels with two elbows

No. 1

No. 3

Style 60Two swivels with one elbow

No. 5

Style 70Two swivels with three elbows

Style 80Three swivels with three elbows No.5

Style 10Three swivels with two elbows No.3

No. 2

No. 1

No. 3No. 6 No. 4

No. 3

No. 1No. 5

No.3

No. 3

No. 1 No. 2 No.1

Chiksan Swivel Joint Styles

Chiksan High-PressureSwivel Joint

Chiksan swivel joints are metal pipefittings with integral ball-bearing swivels.

These rugged fittings come in 3/8- to 12-inch

sizes and can handle cold working pressuresup to 20,000 psi. Chiksan swivel joints are

available for sour gas services at cold working

pressures up to 15,000 psi.

Recommended serviceHydraulic control lines, mud lines, rotary line

connections, BOP lines, test lines, water lines,

offshore wellhead connections, transfer lines,

temporary flow lines, discharge lines,

auxiliary flow lines, acidizing, test lines,

cementing and circulating hoses, choke-and-

kill lines, and other general-service oilfield

applications.

Features & Benefits

Streamline bore minimizes flow restric-

tions: Smooth, round bore design minimizes

turbulence and pressure drop. Longsweep

swivel joints have extra-long radius elbows

for even better flow characteristics.

Bearings key to rotation, strength:

To assure long, dependable service, FMC

swivel joints are matched to load capacitiesand service conditions. All ball races are

either flame hardened, carburized and

hardened, or snap-in stainless steel.

Pressure-tight seals protect bearings from

line fluid:Ball races and bearings are

protected from line fluid throughout the stated

pressure range, including vacuum and suction

service.

Field repairable:Only occasional light

greasing is required to keep Chiksan swivel

joints on the job. If packing, bearings, or ball

plugs should need replacing, easy-to-use field

repair kits are available.

Widest selection in the oilfield:Eight

Chiksan styles or configurations are available

from stock. These styles can be combined in a

variety of ways to suit any installation. End

connections are either threaded, integral Weco

wing union, beveled for welding, or flanged.

Chiksan Original Swivel Joints


4/202

ChiksanOriginal Swivel Joints

Environmental seal andhigh-performance greaseeliminate routine greasing

New alloy steel

provides superiorhardness

Added erosion allowanceunder ball races with noincrease in size or weight

Patented seal meets allapplications from vacuum to

20,000 psi, -50F to 300F

Positive back-up seal protects

ball races agains t operatingenvironments

Longsweep TripleStep Swivel Joint

Longsweep TripleStepSwivel Joints

Available in 3-inch size for abrasive servicessuch as fracturing, cementing, acidizing,

testing, and other extreme well service,

drilling, and production applications to

15,000 psi cold working pressure.

Features & Benefits

Stepped ball race design: A patent

pending stepped ball race design signifi-

cantly increases bending and axial load

capacities for greater strength, safety, and life.

Additionally, the stepped design adds

considerable wall thickness under the maleball races to increase erosion allowance.

Patented Teflon seal: FMCs world proven

Straight-Bore Teflon* Seal (SBTS) provides

unsurpassed sealability and lasts up to five

times longer than elastomer seals. The

SBTS is compatible with all known oilfield

fluids from vacuum to 20,000 psi, -50F to

300F (-46C to 149C) and is impervious

to chemical attack and explosive gas

decompression.

Advanced material selection: The TripleStep

swivel joint is manufactured from forged alloy

steel with a closely controlled, proprietary

chemical composition and heat treatment to

assure superior toughness, ductility, case

depth, case hardness, and core strength with

no increase in size or weight.

Eliminates routine maintenance: An

improved environmental seal reduces the

potential for corrosion in the ball race area.

The integrity of the seal and the use of a high-

performance grease during initial assemblyeliminates the need for periodic greasing.

*Teflon is a registered trademark of Dupont.

Teflon seal lasts up tofive times longer thanelastomer seals


5/20


6/20

Method of Construction

Integral Welded

Cold WorkingPressure, psi

Sizes, in.

1 112 2 3 4

6,000

6,000

10,000

7,500

10,000

15,000

10,000

10,000

15,000

Threaded NPS

High-Pressure

Swivel Joints

LongsweepSwivel Joints

Extra High-PressureSwivel Joints

Olive Green (Sour Gas)

Silver

Black




Black

Red

Color CodeChiksan Models

Black

Wecofig. no.

602

602

1002

1502

2202

1502

1002

1502

2002

1502

15,000Longsweep TripleStepSwivel Joints Red 1502

20,000Light Blue

4

ChiksanCementing & Circulating Hoses

Chiksan cementing and circulating hosescan handle a complete range of fluids at cold

working pressures up to 20,000 psi. These

rugged, all-steel hoses are available in sizesand configurations to meet virtually any need.

All materials meet ASTM or AISI standards.

Recommended ServiceHigh-pressure discharge lines, water lines,

temporary flow lines, well testing lines, and

cementing and circulating lines, and other

high-pressure applications.

Features & Benefits

Chiksan swivel joints:FMC all steel hosesfeature Chiksan swivel joints which provide

flexibility, absorb shock and vibration, and

maximize flow characteristics.

Weco wing union connections:Weco wing

union end connections insure fast, pressure-

tight make-up and break-out without thread-

ing, welding, or special connections.

Simplifies transportation and layout:

Chiksan hoses fold up easliy and quickly for

transportation and storage.

Available for sour gas service:Chiksan

cementing and circulating hoses are available

for sour gas services at cold working pressures

up to 15,000 psi.

High-Pressure HoseOne Weco union and two Style 50 or Style 10Chiksan swivel joints with threaded ends

TS-15 Longsweep HoseFour Weco unions and two Style 50 or Style 10

TripleStep swivel joints with integral Weco union ends

LS-15 Longsweep HoseOne Weco union and one each Style 50 and Style 10Longsweep swivel joints with integral Weco union ends

LSG-10 Longsweep HoseFour Weco unions and two Style 50 or Style 10Longsweep swivel joints

Quick Reference Chart


7/20

FMCSwing Joints

5

Fig. 602

Fig. 1502

Fig. 602

Fig. 1502

30K251

26K251

27K251

32K251

20K201

21K201

22K201

Specially compoundedproprietary Teflon seal handles

sour gas, sour crude, and a widerange of other corrosives

Straight-boreTeflon seal ismechanically andpressure-energized

Radial bearings provide

for easy rotation andmovement of steel lines

Load segment bearing designeliminates threaded retainer nuts andother complex components

End

Connection

Max. Working

Pressure, psi

API Size, in.

Dynetor

Connector

5,000

10,000

15,000

20,000

2-1/16 2-9/16 3-1/16

FMC Swing Joint Quick Reference Charts

32

Nominal Size, in.

Note: Standard Swing Joints are suitable for sour gas service.


6,000

10,000

Weco

Union

Max. WorkingPressure, psi

EndConnection

1

Dynetor frame size

Available with Dynetoror Weco wing union ends

FMC Swing Joint

The Swing Joint disassembles into only four

loose components, including the seal. Because

there are no internal threads in the Swing Joint

housing, disassembly is much easier than withother journal bearing swivels.

FMCSwing Joints are flexible pipefittings for high-pressure, high-temperature

flowline and well testing applications. Swing

Joints are available for critical serviceapplications in 2- and 3-inch nominal sizes

with Weco 602 and 1502 wing union ends and

2-1/16, 2-9/16, and 3-1/16 inch sizes with

Dynetor ends. Swing Joints with Dynetor

ends meet the requirements of

API 16C.

Recommended ServiceTemporary and permanent flow lines, choke

and kill lines, well test lines, and other critical

service applications where flexible piping is

required to facilitate line layout and thermal

expansion.

Features & Benefits

Patented straight-bore Teflon* seal:The

heart of the Swing Joint is its proven, straight-

bore Teflon seal (SBTS). The seal is

mechanically and pressure-energized for

bubble-tight service from vacuum to full

working pressure. The SBTS outperforms

elastomer type seals 5:1 in actual tests.

-20F to 450F, vacuum to 20,000 psi:InAPI performance verification tests witnessed

by DNV, the Swing Joints SBTS qualified for

use at the unprecedented API temperature

range of -20F to 450F (-29C to 232C) and

working pressures from vacuum to 20,000 psi.

Consult factory for applications outside this

range.

Proprietary seal material resists sour fluids

and more: Unlike elastomer seals used in

journal bearing swivels, the Swing Joints

specially compounded Teflon seal material

maximizes resistance to sour gas and a wide

range of other oilfield fluids, reduces friction,

extends wear life, and eliminates explosive

decompression and thermal cycling problems.

Ease of maintenance second to none: The

Swing Joint is easier to maintain and has

fewer parts than any oilfield swivel joint.

Integral Dynetor or Weco wing union

ends: Choice of end connections offers

design flexibility and provides for a high-

strength, high-integrity connection everytime.

31K301

32K301


8/206

Dynetor Single-Nut Connectors

Dynetor Connectors are coupling-typeconnectors designed to replace flanges and

clamp-type connectors in applications from

1-1/2 to 6-inch sizes and provide an unsur-passed level of performance. These world

proven connectors are available in designs,

pressures, and materials to meet ANSI pipe

schedules, API bore sizes, and other industry

standards. Dynetor Connectors matching

API flange sizes meet the requirements of

API 6A, 6FB, and 16C, Other End

Connections, and are qualified per API

6A, Paragraph 918, PR2 requirements, and

are type approved by DNV. All designs and

sizes are suited for both standard and sour gas

service in cold working pressures up to 20,000

psi and temperatures from -20F to 450F(-29C to 232C).

Recommended ServicePermanent flow lines, temporary flow lines,

well injection lines, well test lines, Xmas tree/

wellhead outlets, utility lines, manifold and

valve connections, choke and kill lines,

blowout preventer lines, offshore and marine

environments, and other non-suspension

piping applications where flanges and clamp-

type connectors may be used. Available in a

wide range of materials to meet applicationspecific demands (see Dynetor Connector

Trim Chart, page 7).

Features & Benefits

Lighter, smaller, faster:Dynetor Connectors

weigh one-fifth to one-half the amount of

flanges and clamp-type connectors, have

smaller profiles, and can be made up five to

nine times faster.

Proven, reusable seal:The heart of the

Dynetor Connector is its straight-bore seal.

Available in metal (SBMS) or Teflon*

(SBTS), the Dynetors reusable seal is

mechanically and pressure energized for

bubble-tight service from vacuum to full

working pressure.

Integral power threads for fast make-up:

Dynetor Connectors use rugged Acme

power threads to engage or disengage the

mated piping ends. This provides a high-

strength, high-integrity connection.

Dynetor Connectors

Internal Acme power threadspull together hubs andengage the high-integritymetal-to-metalseal.

Serrated faces on hub endscome into powered contact toprevent accidental back-off.

Detachable floating nutsimplifies stabbing andminimizes alignment problems.

Reusable, pressure-energizedmetal seal (SBMS) or Teflon seal(SBTS).

Makes up quicklyand easily withordinary pipe orspanner wrenches.

Detachable floating nuts: The nut floats

along the axis of the connector hub during

make-up and break-out. This feature elimi-

nates the need to power off the entire length

of the engaged thread, simplifies stabbing, and

eliminates bolt-hole alignment problems.


Dynetor Double-Nut Connectors

Symmetrical hubs providemaximum piping system designflexibility.

Seal is mechanically andpressure energized for bubble-tight service.

Load segments secure nutsto hubs; cannot be removedunless the connector is

disengaged.

Threads are automatically

sealed after make-up.

O-ring seals provideadditional environmentalprotection.

Visual indication is provided

to insure that the connector isfully made up.


9/20

5432-1/221-1/2

Nominal Size, in.

Single-Nut

and

Double-Nut

Pipe ScheduleModel

40

80

160

XXS

Notes: Dynetor Connectors are rated at o r above corresponding pipe ratings per ASME Section VIII, Division 2 and ANSI/ASME B31.3. Dynetor Connectors are also

available in Schedule 120 pipe in the four and six inch sizes.

6

Dynetor Connectors for Carbon Steel Pipe

API Size, in.

2,000

3,000

5,000

10,000

15,000

20,000

Model1-13/16 2-1/16 2-9/16 5-1/84-1/16

Single-Nut

and

Double-Nut

Dynetor Connectors with Full Bore Weldneck Hubs

Note: Working pressure ratings and internal diameters correspond to those of API Specification 6A.

3-1/16 3-1/8

Max. Working Pressure,psi

Dynetor seal technology raises performance

standards: -20F* to 450F, vacuum to 20,000 psi

The key to the Dynetor Connectors ability to handle extremeoilfield conditions is its radial seal which is permanently energized and

impervious to the widest range of oilfield corrosives. This patented,

specially compounded Teflon seal maximizes resistance to sour gas,

sour crude, and other oilfield fluids, eliminating explosive decompres-

sion, swelling, and deterioration. Dynetor premium-service seals easily

handle sour crude, sour gases, and other corrosives commonly encoun-

tered in drilling, production, and well servicing. These capabilities,

coupled with dramatic reductions in seal friction and wear, result in

significantly extended seal life and improve reliability across the

broadest range of applications.

* For services below -20F, consult factory.

7

Component Material1

ASTM A36 2, 5

ASTM 4130 modified 2, 5

Inconel 625 inlayed seal pocket (optional)

ASTM 4130 modified

Teflon 2, 3

Inconel 625

ASTM 4130 modified 2Nut

Seal

Applications

Low-pressure, non-corrosive services

High-pressure, non-corrosive services

High-pressure, corrosive services

High-pressure, non-corrosive services, permanent installations

High-pressure, corrosive services, repeated make-up/break-out

High-pressure, corrosive services, permanent installations, fire resistant models4

All applications

Dynetor Connector Trim Chart

Hub

1Dynetor Connectors are available in other materials to meet specific requirements; consult factory. 2Standard material unless otherwise specified.3Teflon is a registered trademark of Dupont. 42 to 3-inch 5,000 psi models. 5 Seal pockets are nickel plated.


10/208

Figure 1001,000 psi (69 bar) cold working pressure

Recommended serviceManifold and line connections

Features

Makes up pressure-tight with hammerEconomical, low-pressure union

See Quick Reference Chart (page 10) for sizes and end connections.

Weco wing unions are the most completeline of standard and sour gas pipe connections

available, ranging in size from 1- to 12-inches

with cold working pressures to 20,000 psi.All Weco unions are color coded for quick

identification. Materials meet ASTM and

AISI standards.

Features & Benefits

Positive sealing designs:Weco wing union

seals vary according to pressure and applica-

tion. All provide positive, pressure-tight

sealing.

Fast make-up and break-out:Three-lug nuts

and rugged self-locking Acme threads provide

fast make-up and break-out regardless of

position or space restrictions. No special tools

are required.

Interchangeable parts:All Weco parts of the

same size, pressure rating, and figure number

are interchangeable, making it easy to match

male and female subs that are frequently

made-up and broken-out.

Choice of end connections:Weco wing

unions are available with line pipe or tubingthreads, butt-weld or nonpressure seal end

connections.

Nonpressure SealConnection

The nonpressure seal option is especially

designed for abrasive, high-pressure services

where welded connections are undesirable.

This design provides strong, permanent end

connections without butt welding. The union

ends are shop assembled to pipe or tubing. An

epoxy thread-locking compound is used tosecure the connection. All threads are isolated

from the line fluid, and the smooth bore

assures minimum turbulence, decreases

washouts, and reduces chemical, acid, sand, or

cement build-up around the pipe ends.

Connecting threads are API round tubing

threads for extra strength. Available in

Figures 602, 1002, and 1502.

Weco Original Wing Unions

Nonpressure Seal Connection

Figure 207Blanking union2,000 psi (138 bar) cold working pressure

Recommended service

To seal manifold connections and protect union threads

Features

Parts interchange with Figs. 200 and 206 O-ring on blanking cap assures leak-tight seal Can be tapped for pressure guage


Recommended service

General-service manifolds and lines

Features

Economical, general-purpose union


Recommended service

Manifold and line connections, suction service, andcorrosion service

Features

Replaceable O-ring in male sub improves sealingand protects metal-to-metal seal against corrosion

Tubing or pipe

Female sub

Wing nut

Seal ring

Male sub


11/209

Figure 211Insulating union

2,000 psi (138 bar) cold working pressureRecommended service

For production systems with electrolytic corrosionproblems

Features

Replaceable, laminated insulating rings eliminateall metal-to-metal contact, provide 35 millionohms resistance

Figure 100210,000 psi (690 bar) cold working pressurethrough 4-inch sizes; 7,500 psi (517 bar) coldworking pressure, 5- and 6-inch sizes

Recommended service

Cementing, fracturing, acidizing, testing, andchoke-and-kill lines

Features

Replaceable, lip-type seal; 5- and 6-inchsizes have O-ring seal

Available in detachable nut design Available for sour gas service (see Quick

Reference Chart, page 10, for details)


Recommended service

Manifold and line connections, and mudservice

Features

Available in detachable nut design Replaceable, lip-type seal Available for sour gas service (see Quick


Figure 4004,000 psi (276 bar) cold working pressure through4-inch sizes; 2,500 psi (172 bar) cold workingpressure, 5-inch through 12-inch sizes

Recommended service

Manifold and line connections, pump suction and

mud serviceFeatures

2-1/2- through 12-inch sizes have O-rings forprimary seal

Available for sour gas service (see QuickReference Chart, page 10, for details)


Recommended service

Steam service, boiler connections, manifoldand line connections for production, drilling,and well servicing

Features

Bronze seat provides primary seal; willnot rust in water services


Recommended service

Especially designed for sour gas service

Features

Meets National Association of CorrosionEngineers Standard MR-01-75 andAmerican Petroleum Institute RP-14E

Heat-treated components 100 percent testedfor hardness Fluoroelastomer seal rings


Recommended service

Cementing, fracturing, acidizing, testing, and

choke-and-kill linesFeatures

Replaceable, lip-type seal 2- and 3-inch line sizes Butt weld configurations only

Figure 1003Misaligning union

10,000 psi (690 bar) cold working pressure through3-inch sizes; 7,500 psi (517 bar) cold workingpressure, 4- and 5-inch sizes

Recommended service

For high pressure connections where lines cannotbe aligned

Features

Ball seat provides positive seal with up to 7-1/2misalignment; 2-inch model up to 4

Available with threaded or butt weld ends Available for sour gas service (see Quick



Recommended service

Cementing, fracturing, acidizing, testing, andchoke-and-kill lines

Features

Replaceable, lip-type seal Available for sour gas service: 10,000 psi

(690 bar) cold working pressure

Air-O-Union150 psi (10 bar) maximum line pressure

Recommended Service

Mud suction and return lines, low-pressurefluid lines

Features

Inflates with rig air (200 psi maximum) No nuts, bolts, or wrenches required 4, 6, 8, 10, 12, 13, and 16-inch sizes


12/2010

Weco Wing Union Reference Chart

Notes:

NA-NotAvailable

Allendconnectionsarelinepipethread

sunless

otherwisenoted.

1.

Butt-weldavailable.Consultfactoryforwallthickness.

2.

Nonpressuresealconfigurationsavailable.

3.

Powermake-upmustbeusedforlinepipeth

readedconnectionsto

achieveratedcoldworkingpressure.

4.

Linepipethreadsarenotofferedforsourgasserviceinthisfigure

number.

5.

Linepipethreadsarenotrecommendedforsourgasserviceabove

4-inchesnominalpipediameter.

6.

Figure400availablein51/2-to7-inchODwithcasingthreads.

7.

Figure1002alsoavailablein21/2-inchEUE

:5-and6-inchsizes

availablewithbutt-weldendsonly.

8.

Figure1502in4-inchsizeavailablefor31/2-inchIDtubing,butt-

weldornonpressurese

alconfigurationonly.

9.

Figure2002in3-inchsizeavailablefor3-inchIDtubing.

10.Figure1003in5-inchsizeavailablewithbutt-weldendsonly.

11.Availablewithbuttweldendsonly.

12.Allunionsforsourgas

servicearepaintedolivegreen,stamped

SOURGASorNAC

EMR-01-75andhavespeciallymodified

materialproperties.

13.5-and6-inchsizesratedat7,500psiCWPand11,250psitest;

5-and6-inchunionsforsourgasserviceratedat5,000psiCWP

and7,500psitest.

14.4-and5-inchsizesratedat7,500psiCWPand11,250psitest;

4-and5-inchunionsforsourgasserviceratedat5,000psiCWP

and7,500psitest.

Sour

gasservice

F

MCmanufacturesWecosourgaswingunionsinaccordancewiththe

Nation

alAssociationofCorrosionEngineers(NACE)StandardM

R-01-75

andth

eAmericanPetroleumInstitutes(API)StandardRP-14E.

Figure

Number

Assembly

ColorKey

100

1,0

0

0

2,0

0

0

2,0

0

0

2,0

0

0

2,0

0

0

2,5

0

0

4,0

0

0

6,0

0

0

6,0

0

0

10

,00

0

10

,00

0

15

,00

0

20

,00

0

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

StandardService

SourGasService

(seeno

te12)

ColdWo

rking

Test

Test

1,5

00

3,0

00

3,0

00

3,0

00

3,0

00

3,7

50

6,0

00

9,0

00

9,0

00

15

,000

15

,000

22

,500

30

,000

15

,000

NA

NA

22

,500

10

,000

15

,000

6,0

00

9,0

00

4,0

00

6,0

00

2,5

00

3,7

50

7,5

00

11

,250

7,5

00

11

,250

1 1 1 1,5,6

1 1 1,2

1,2,3,

7,1

3

1,3,1

0,

14

1,2,3,

8 9,1

1

11

ColdWorking

200

206

207

211

400

400

600

602

1002

1003

1502

2002

2202

Nom

inalPipeSizes(inchs/mm)

PressureRating(psi)

Notes

250

21265

380

112

40

125

114

32

4100

5125

6150

8200

10

250

12

30

0


13/2011

FMCs lightweight, one-piece pupjoints feature integral Weco wing union end

connections to eliminate welds and threadsonce and for all. Available in lengths to 12

feet, Weco alloy-steel pup joints efficiently

handle a variety of fluids at cold working

pressures up to 15,000 psi. Weco pup joints

are available for sour gas services up to10,000 psi cold working pressure. Consult

factory for other sizes and figure numbers.

Recommended ServiceHigh-pressure discharge lines, auxiliary flow

lines, temporary flow lines, well testing lines,water lines, choke-and-kill lines, and abrasive

applications.

service. FMC integral fittings are available in

combinations (male by male, male by female,

etc.) to suit virtually any installation. All

FMC fittings are high-quality forged con-

struction with full traceability and

can be supplied with Charpy impact values.

Weco Integral Pup Joints

FMC Integral Fittings

Long radiusconnector

Blockconnector

Teeconnector

Crossconnector

FMCoffers a full line of forgedfittings with either integral Dynetor connector

or Weco wing union end connections.

Crosses, tees, ells (block and long radius),

wyes, and laterals are available in 1- through

4-inch sizes for services to 15,000 psi cold

working pressure for standard or sour gas

Weco wing union nutdetaches for field repair

Uninterrupted bore for greater flow capacity andimproved flow characteristics

Weco Pup Joint Quick Reference Chart

One-piece construction eliminates all welds andthreads; allows uniform heat treating for superiorstructural integrity

Specially machined shoulder prevents nut fromsliding down pup when held vertical

Fully traceable; available with Charpy impactvalues for cold temperature service

Recommended ServiceHigh-pressure discharge lines, auxiliary flow

lines, temporary flow lines, well testing lines,

cementing and circulating lines, and other

high-pressure applications.

2

2

3

Standard

Sour Gas

15,000

10,000

Fig. 1502 Union 1.75

1.75

.313

.438

Size, in. Type of Service Cold WorkingPressure, psi

Weco End Connection Bore Size, in. Wall Thickness, in.

3 Standard

Sour Gas

15,000

10,000

Fig. 1502 Union

Fig. 1502 Union

Fig. 1502 Union

2.62

2.62

.313

.438


14/2012

Weco Butterfly Valves, Operators & Actuators

Weco butterfly valves provide dependableon/off and throttling services from absolute

vacuum to 175 psi cold working pressure.

These economical valves are available fromstock in 2- through 24-inch sizes. Wafer,

notched, and lug-type body styles meet ASTM

and AISI standards. All sizes and styles can be

equipped with Weco operators or actuators.

Recommended ServiceTrims and materials available for any applica-

tion where one-quarter turn, low-pressure

valves can be used. Models are available for

high-pressure and abrasive-service applications.

Features & BenefitsValve body is pressure containing compo-

nent:Weco butterfly valves feature a resilient

seat with two-piece hard phenolic back-up.

This design allows the seat to expand while

under pressure, making the valve body the

pressure containing component.

No flange gaskets required:Ribbed seat face

eliminates flange gaskets, insuring leak-proof

installation.

Triple seal design:FMCs triple seal design

(see color illustration) provides three com-

pletely independent seals to isolate the stem

from line fluid.

Weco dual stem advantage:A dual stem with

upper and lower tangential pins and broached

hex drive provide positive disc movement

without in line pins, screws, or bolts. This

design keeps all stem parts out of the flow path

for greater flow efficiency.

Choice of operators and actuators:

Wecobutterfly valves can be equipped with standard

and throttling handles, gear operators, chain-

wheel operators, and Weco pneumatic and

vane-type actuators.

High-pressure models:FMC offers Weco

butterfly valves for high-pressure applications

to 285 psi. These valves eliminate the need for

exotic high-performance valves in many

services.

Streamlined disc

Resilient seat

Ribbed seat face

Triple seal: O-ring,undersized stemholes in seat,corresponding flats onseat and disc hubs

Two-piece phenolicback-up

Weco Model 12 Butterfly Valve

Weco Model 22LButterfly Valve

Weco Model 22Butterfly Valve

Weco Model 12Butterfly Valve

Weco Model 12NButterfly Valve


15/20


16/20

End Connections

Sizes, (in./mm)Cold WorkingPressure

Description

Model DR 50

250

Model DR 100

Model DR 100

Model DR 150 (sour gas)

Model DR 150

Model DR 150

Model ULT 150

Model DR 200 (sour gas)

Model DR 200

5,000 psi(345 bar)

10,000 psi(690 bar)

10,000 psi(690 bar)

10,000 psi(690 bar)

15,000 psi(1034 bar)

15,000 psi(1034 bar)

15,000 psi(1034 bar)

15,000 psi(1034 bar)

20,000 psi(1380 bar)

Integral Weco unionsFigure 2002


Detachable Weco unionsFigure 1502




Threaded

Threaded

Threaded or EUE

21265

380

11240

125

1 x 225 x 50

Model ULT 150 (sour gas) 10,000 psi(690 bar)

Detachable Weco unionsFigure 1502

4100

14

Weco Plug Valves, Operators & Actuators

Weco plug valves are reliable, quarter-turnvalves designed for standard and sour gas

services to 20,000 psi cold working pressure.

These rugged valves range in size from 1 to 4inches and come with threaded, Weco wing

union, or Dynetor connector ends.

Recommended ServiceCementing, fracturing, acidizing, and other

high-pressure lines which handle slurries,

abrasives, drilling muds, chemicals, and other

similar products.

NOTE: Only genuine FMC replacement parts are

recommended for use in FMC plug valves.

Model DR Plug Valves

Floating segments insure positive seal:Dual

seal segments float slightly to offset possible

micro-expansion of the valve body and insure

a positive seal in extreme high-pressure

applications.

Easy operation under pressure:The

cylindrical plug fits between a set of seal and

side segments to prevent the plug from

sticking to the valve body for easy operation

under pressure.

Complete in-line maintenance:Valve can be

rebuilt in-line by replacing the plug, segments,

and seal rings.

Choice of operators, actuators:Gear

operators, pneumatic actuators, and hydraulic

actuators are available.

Model ULT Plug Valves

Two-piece floating plug/stem:FMCsproprietary floating plug and stem uniformly

distribute load against the downstream seat to

improve seal-ability and reduce plug wear.

Exclusive seal design extends service life:

Seal design forces line fluid between the plug/

seal interface when the valve is closed to limit

potential wear to replaceable components.

Bottom entry for fast, easy repair:The

Model ULT valve features bottom entry

design for fast, easy inspection and repair.

Weco Plug Valve Quick Reference Chart

NOTE: Valves for sour gas service meet National Association of Corrosion Engineers Standard MR-01-75 and

API Standard RP-14E. Body Material: Alloy Steel

Model DR 150 Plug Valve

Detent spring

Body cap

Body cap O-ring

Seal segment

Alloy steel body

Side segment

Plug cap

Model ULT 150 Plug Valve

Actuators mount directly to valve

Choice of end connections

Two-piece floating plugand stem

Seal design limits wear toreplaceable componentsBottom entry for easy repair


17/2015

All models feature Chiksan swivel jointsfor smooth rotation and durability, and are

also equipped with replaceable tungsten-

carbide nozzles. Materials meet ASTM andAISI standards.

Chiksan NonspinMud Mixing Guns2,000 psi (138 bar) cold working pressure;

2-inch size.

Chiksan SpinnerMud Mixing Guns2,000 psi (138 bar) cold working pressure;

2-inch size.

Chiksan Bottom-TypeMud Mixing Guns2,000 psi (138 bar) cold working pressure;

2-inch size (consult factory for other sizes

and pressures).

FMC Flowline Check Valves

FMCs Flowline Check Valves areused to isolate well servicing equipment from

well fluids and high-pressure treating fluids.

These rugged valves seal against a complete

range of well servicing fluids to 15,000 psi.

They are available in 2- and 3-inch bore sizes

for standard or sour gas services. Models

configured for flow as shown or for reverse

flow are offered. They are available with or

without a downstream pressure port.

Recommended ServiceHigh-pressure well servicing lines, fracturinglines, testing lines, cementing and circulating

lines, and other well service and stimulation

applications.

FMC Check Valve

Weco wing union endconnection

Abrasion-resistantcoated flapper

Stainless steelangled seat

Acme thread closure

Forged body

Bottom-type, 2-in.

Bottom-type, 3-in.Nonspin-type

Spinner-type

Chiksan Mud Mixing Guns


18/20

FMCs Pressure Relief Valves arethe automatic way to relieve pressure at presetsystem limits. These rugged, compact valves

are available from stock for operating

pressures up to 15,000 psi. They come in 2-

and 3-inch sizes with threaded, Weco wing

union, or Dynetor connector ends.

Recommended ServiceHigh-pressure well servicing lines, fracturing

lines, cementing and circulating lines, and

other well service and stimulation applica-

tions.

FMC Pressure Relief Valves

FMC Manifolds

16

FMCoffers manifolds in materials,sizes, pressures, and temperature ratings for a

complete range of oilfield applications. These

rugged manifolds feature world-provenChiksan, Weco, and Dynetor fluid control

components for unsurpassed reliability,

substantial size and weight savings, fast make-

up and break-out, and improved safety.

Recommended ServiceHigh-pressure flowback, choke-and-kill, well

testing, production, and well servicing

applications.


19/2017

FMCcan not anticipate all of the situations a user may encounter while installing and using FMC products. Therefore, the user ofFMC products MUST know and follow all applicable industry specifications on the safe installation and use of these products. Refer to FMC

product catalogs, product brochures and installation, operating and maintenance manuals for additional product safety information or contact

FMC at 800/772-8582.

FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH!

1. Do not mix or assemble components, parts or end connections with different pressure ratings.

Mismatched parts may fail under pressure.

2. Do not use or substitute non FMC components or parts in FMC products and assemblies.

3. Do not strike, tighten or loosen pressurized components or connections.

4. Do not exceed the rated working pressure of the product.

5. Complete and proper make-up of components and connections is required to attain rated working pressure.

6. Do not use severely worn, eroded or corroded products. Contact FMC for more information on how to

identify the limits of erosion and corrosion.

7. Follow safe practices when using products in overhead applications. Products not properly secured

could fall.

8. Select only appropriate product and materials for the intended service:

Do not expose standard service products to sour gas fluids. (Refer to NACE MR-0175.)Do not interchange sour gas components with standard service components.

Use appropriate safety precautions when working with ferrous products in below freezing temperatures.

Freezing temperatures lower the impact strength of ferrous materials.

9. Follow manufacturers instructions and Material Safety Data Sheet directions when using solvents.

10. Make certain that personnel and facilities are protected from residual hazardous fluids before disassembly

of any product.

11. If any leakage is detected from FMC products, take them from service immediately to prevent potential

damage and personal injury.

SAFETY INSTRUCTIONSThe applications of FMC products are in working environments where general personnel safety procedures and policies MUST be

followed. Always use appropriate protective equipment in high pressure, extreme temperature or severe service applications.

Warnings and Safety Instructions

WARNINGS


20/20

Copyright 1997 FMC Corporatio

FMC Corporation

Fluid Control Division

Fluid Control Headquarters

FMC Fluid Control Division

6677 North Gessner Road

Houston, Texas 77040

Phone: 713/510-6800

Fax: 713/510-6803

E-mail: [email protected]

http://www.fmc.com/Eteg/

Manufacturing Facility


2825 West Washington

P.O. Box 1377

Stephenville, Texas 76401

Phone: 254/968-2181

Toll Free: 1-800-772-8582 (U.S.A.)

Fax: 254/968-5020

Louisiana

FMC Fluid Control Division130 St. Nazaire Road

Box 51709

Broussard, Louisiana 70518

Phone: 318/837-9263

Fax: 318/837-5844

Rocky Mountains


1675 Broadway, Suite 1800

Denver, Colorado 80202

Phone: 303/623-4622

Fax: 303/623-7347

Alaska

FMC Fluid Control Division700 W. International Airport Road

Building A-1

Anchorage, Alaska 99518

Phone: 907/563-3990

Fax: 907/563-5810

Scotland

FMC Corporation (U.K.) Ltd.

Wellington Circle

Aberdeen AB12 3JG

Scotland

Phone: (44) 1224/898-555

Fax: (44) 1224/249-460

The Netherlands

FMC Fluid Control (Nederland) B.V.

Europalaan 16

Box 757

2400 AT, Alphen a/d Rijn

The Netherlands

Phone: (31) 172/470-024

Fax: (31) 172/470-026

France

FMC Europe S.A.

Z.I. Molina LaChazotte

810 Rue George Sand

42350 La Talaudiere, France

Phone: (33) 4/7747-5015Fax: (33) 4/7747-5014

Singapore

FMC Southeast Asia Pte. Ltd.

149 Gul Circle

Singapore 629605

Phone: (65) 862-3659

Fax: (65) 861-8251

United Arab Emirates

FMC International S.A.

Al Moosa Tower, 17th Floor

Box 3228

Dubai, United Arab Emirates

Phone: (971) 4/310-948Fax: (971) 4/310-950

Venezuela

FMC Fluid Control de Venezuela, S.A.

Avenida Intercomunal

Frente Carretera L

Los Morochas, Etado Zulia

Venezuela

Phone: (58) 65/26901

Fax: (58) 65/23406

Documents

FMC Fluid Control Flowline Products - Catalog