8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 1/15
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 2/15
PRODUCT DETAILS PHK
Total length (mm) 239Blade length (mm) 126Blade thickness (mm) 5Blade prole Convex
Tang Full-lengthWeight (knife) 6.7 oz (190 g)Steel 3GHardness (HRC) 62
Handle material ThermorunSheath Zytel
A few words from Peter The Big Game Hunter´s Knife
Tricky but funOf course, you need to do some extra hard
thinking when after a great deal of effort youbegin to design something that is to end up asa hunting knife for big game. The concept for a new design has been there for a few years,but it is still a big step to determine the exactdimensions, and to get there is like crossing amineeld. Without wishing to belittle the pain
and toil that pregnant women go through, Iwould still say that the trouble a knife designer goes through, if not as great, is neverthelesssignicant during the process: misjudging
something by a single millimetre will meanthat an expected success instead becomes a
complete disaster! This means you have to be
able to trust your own judgement. I have been
hunting since 1974, but I started spendingtime out of doors much earlier – the forest,the lakes, the mountains and the sea have in
many ways been my home for 50 years. Sonaturally I have something to lean on when I
create a new knife, and of course it becomes achild of mine and one that I readily embrace.
The power of the media
There were times in my home country when aperson was considered a better hunter if thelength of the blade was no more than 7.5 cm,and hunting magazines did not hesitate to join
in. Through the power of the media, all hunterswere suddenly supposed to carry short-bladedknives so as not to be different. OK, a short
knife blade functions in most situations whenone is cleaning prey, but in all honesty – isn’t itmore a question of knowing where to place theedge? Look at an experienced butcher and
you will soon notice a knife blade that is 13cm or longer. What conclusions can we drawfrom this?
However, the blade length is not to do with
right or wrong – the main thing is that you arehappy with the knife, that it does a good job,
feels safe, is easy to clean, it keeps an edgewell and in addition that it can be used for several different tasks.
Big game knifeThe Professional Hunter’s Knife (PHK) is in my
opinion one of the world’s best hunting knives
for big game, in which function, safety andhygiene are paramount. The blade’s specialupsweep drop-point gives a long aying
curve without making it look wide or clumsy.The rust-resistant laminate powder steel 3Ggives a blade that is strong and which keeps
an edge well. The handle in tough Thermorunand a stainless nger guard gives a safe,
comfortable grip regardless of the conditions.There is perhaps no better hunting knife for big game.
Zytel sheath
The new injection moulded zytel sheath offers
a compact, strong and secure combinationof properties expected to make it extremely
attractive to all users.
25th anniversaryThis catalogue marks the 25th anniversary of
our company, something which we nd highly
pleasing. The company was registered on 8February 1984 and has since then grownin size and strength. In the rst years, the
company imported and sold products fromthe most well-known manufacturers in Europeand the USA. The unique knife cataloguefrom 1985 established the company on boththe Swedish and the Nordic market.
Enquiry from the Swedish Defence Materiel
Administration
Back in 1987, the company received an
enquiry from FMV, the Swedish DefenceMateriel Administration, concerning a newsurvival knife for aircraft pilots in the SwedishArmed Forces. Initially, large numbers of sheath knives and folding knives from what
were then the world’s leading manufacturerswere tested, but sadly all with the same poor results - they did not stand up to the strain or they were too dangerous, too cold in winter or had other faults.
New philosophy
In that situation, the company started itsown investigation which resulted in a newphilosophy for the construction of survival
knives. Based on the investigation, Mod. F1
was developed, and in August 1995 the rst
shipment went to the Swedish Air Force.
The world’s most modern knifeEight years may seem a long time to develop
a knife, but the result was an edged implementwhich to this day is considered the world’smost modern of its type. T he long development
period was also a consequence of the time ittook to introduce a new, considerably moreadvanced, and much more expensive knife
concept than military personnel had seen thusfar. Mod. F1 is now an integral part of the JAS39 Gripen ghter aircraft system and sits in the
thigh pocket of every Swedish ghter pilot’ssurvival suit.
Worldwide success
Mod. F1 was a worldwide success, amongother things because it was the rst serial
production sheath knife with a special steelblade. The new philosophy behind Mod. F1 wasapplied in the development of the subsequent
models which today make Fällkniven AB theworld’s leading manufacturer of knives for
hunting and survival. The safe, secure design,
the high technical standard and a relevant
price level has meant that our products are
today sold all over the world.
The Hunter’s Eye
So what is behind this success story, howhas it come about that a micro-enterprise far up at the Arctic Circle, far from the densely
populated areas of the world, can reach themarket with its products as well as it has sofar? I believe it has something to do with my
own experience as a hunter and sher. To
constantly spend time in nature eventually
leads to in-depth knowledge and experience
of how instruments and equipment shouldwork, and this is the basis for the practical
and technical design that characterises thecompany’s knives.
But I do not think that the results are purelymy doing: The latent memory of the mind and
the lower brainstem also store generations of experience as to how a sharp edge should
look to function in nature. I prefer to call thisidea, this view, this experience the Hunter’s
Eye, the sign of good safe function. It meansthat you can trust our products even in
extreme situations, something that it may be
worth remembering when you are looking for equipment to use in nature.
Generation handover
After 25 years in the business, I intend tohand over more and more of the company
operations to my son Eric: He is extremely
knowledgeable about knives and will carry on
the family tradition in the best way. Myself -I hope to be able to spend more time in andaround the forest and perhaps gain inspirationfor more knife designs with the Hunter’s Eyehallmark.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 3/15
PRODUCT DETAILS HK9 HK9cx FH9 FH9mop
Total length (mm) 195 195 158 158Blade length (mm) 90 90 67 67Blade thickness (mm) 4.5 4.5 3 3Steel 3G Cowry X 3G 3G
Hardness (HRC) 62 64 62 62
Handle material Maroon / Ivory micarta Pearl
Sheath Leather Clips Suéde
Advanced Hunting Knives
FH9Naturally, folding knives are not quite as
strong as sheath knives, and are more
expensive to manufacture since they
contain several moving parts. Neverthe-less, many prefer a folding knife, mostlybecause of the handy format and itsconsiderably more discreet qualities,especially attractive in an urban envi-ronment. FH9 is in fact a folding knifefor hunting, but we think that more user categories will like its slim design andnatural function. The blade is locked us-ing a distinct front lock and the rigid clipclasps the knife to the pocket lining.
FH9mopOK - we admit that this mother-of-pearl
handled beauty isn’t the classic painttin opener. Nevertheless, we hope that
those who invest in this most beautiful
folding knife will treat themselves to the
luxury of using it day-to-day, because itis a utility knife, albeit an exclusive one.
The blade in stainless laminate powder steel keeps an edge well, and the whole
knife feels robust and well-made. Thethrill of the exceptionally lovely mother-of-pearl mosaic will be difcult to get
over!
HK9
HK9 is a hunting knife for the advanced, expe-rienced hunter who knows where to place theblade on the prey. It is also a good all-roundknife, feels sturdy in the hand, compact in away, easy to use, and stable. It does not ap-pear so, but when using the knife you have
the feel that it is one of the world’s most ad-vanced hunting knives you have in your hand.
If not before, it is noticeable when beginning tocut - the laminate powder steel keeps an edgeunbelievably well.
Fällkniven AB celebrates 25 years in theknife business!
These knives mark our 25th anniversary. We
have put into these models some of our long-
term experience from actively using knives in
the forest and the countryside. We combineour know-how in practical design with classicScandinavian expression, and to this we add
the world’s most advanced steel technology.
The result is a sheath knife and a folding knifewhich are a cut above the rest!
HK9cxWe take pride in our manufacture of exclusive
knives which not only offer an elegant and
beautiful design but are also practical tools.The polished Damascus steel blade witha core of CowryX powder steel is not onlyattractive, it is also strong and keeps an edge
better than any other steel we know of. Wehope therefore that this special version will not
be left in a glass cabinet but that the knife willbe put to use - luxury in practice!
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 4/15
Tre Kronor Sheath Knives
PRODUCT DETAILS TK1 TK2 TK5 TK6
Total length (mm) 215 215 175 175Blade length (mm) 100 100 80 80Blade thickness (mm) 4,5 4,5 4,5 4,5Steel 3G - laminate powder steelHardness 62 HRC
Handle material Micarta Cocobolo Thermorun
Sheath Black leather
Tre Kronor 5 - de Lux Hunter
The experienced hunter will love t his knife! To
take care of game the knife does not have to
be big, but shaped correctly. The drop-pointblade has the correct shape not to damagemembrane and intestines, as long as youknow where to make the incisions. Three
nger knives are handled like this – whenthe handle is placed in the palm of your handand the ngers are placed over the blade
you will understand how the knife is meantto work. The TK5, with its shorter handle, is
not the ideal wood carving knife but should be
considered as a pure hunting knife. Many tendto like the shorter format, which is why theTK5 has potential to become a very popular
allround knife. The wooden shaft does notneed any special care, but a drop of wood oilor linseed oil every now and t hen won’t hurt.
Tre Kronor 6 – Hunter If it is one thing a hunter appreciates it is a
knife that stays sharp – like the TK6. Thisblade is made of laminate powder steel, whichcombines both strength and edge retention.The handle is made of checked Thermorunfor safe and hygienic comfort. We believe that
you will never have held a knife before that
is better at retaining its sharpness than thisknife. Once the sharpness is dulled, you usea at, diamond whetstone to restore it, have
a look at our whetstones DC3 and DC4. The
easiest way to care for your knife is to wash itin hot water with some detergent and then let itself dry, before it is put back in the sheath.
Tre Kronor 2
If price and performance are the decidingfactors, then TK2 is the hands-down winner.
The secure, comfortable grip and the powerfulblade, in laminated powder steel, form acombination whose value is unparalleled in
the world. It is a utility knife, which can berelied on to get the job done.
A Swedish knife series in world class Tre Kronor, the Swedish knife series, offers
a highly advanced technological solution
combined with timeless Swedish design. Asthe result of a long development process, we
are the rst company in the world to be able to
offer a laminate knife blade in 3G steel, edgedwith sintered steel, or powder steel. To thisedge steel, we have added resilient, corrosive
resistant steel that stabilizes the hard center.This gives a rigid, strong blade that retains
its edge extremely well. These knives are in
the Swedish minimalist tradition, where formharmonises with function. The result is anedge tool that is easy and exible to handle –
a Swedish knife in world class.
Tre Kronor 1If you want to spoil yourself with a trulybeautiful, technically perfect knife, then theTK1 is the obvious choice as it is simply
breathtaking. The laminate powder steel offersstrength and an edge never previously foundon the world market. Every knife is handmade
by experienced, skilled knife makers, which
makes each knife unique.
New from 2009 - you can choose betweenthree different handle materials: Cocobolo,Ivory Micarta and Maroon Micarta.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 5/15
Tre Kronor Folding Knives
PRODUCT DETAILS TK3 TK4Total length (mm) 165 165Blade length (mm) 70 70Blade thickness (mm) 2.5 2.5Weight (knife) 100 g 50 gSteel 3G - laminated powder steelHardness 62 HRCSheath belt cover in Cordura
Elegant, modern folding knives
The beautiful enduring design is theresult of a long renement process
focusing on the functional concept of thefolding knife. The new edge steel, 3G, is alaminated corrosive resistant steel, with a
core comprising the well-proven powder
steel Super Gold Powder Steel (SGPS)and sides of VG2. All models come withnail-nicks on both sides, this ensuresthat these folding knives can be usedby both left and right-handed people.The blade locks in its open position witha well-proven locking mechanism. With
each folding knife comes a black cordurasheath, if you want to carry the knife inyour belt. TK3 is a secure, solid foldingknife, whose blade, in our new 3G steel,
represents the best on the market today.Every folding knife is manufactured by
hand, which should and does mean smallvariations. None of the materials come
from endangered species or material.Since the materials come from nature,they can shrink and expand, which has
to be accepted.
Tre Kronor 3Cocobolo is a hard, medium brown wood
variety that we like to use for handmade
knives. A small amount of wood oil or
common furniture polish will give the
handle a nice glow.
TK3tw
The Tiger Wood handle material has adarker appearance. The venation may
vary, but it is normally very straight. A
classic handle material.
TK3rq
Red quince is a kind of apple tree withbeautifully veined structure. This material
is treated with epoxy and is very stable –and beautiful! A little bit of oil gives it even
more lustre! To be discotinued.
TK3bq
Black quince is a kind of apple tree withbeautifully veined structure, its colour runsin black, grey and beige. This material istreated with epoxy and is very stable. No
shaft looks the same! To be discotinued.
TK3im
Ivory Micarta is intended to simulate ivory
as regards appearance, but is stronger and perfectly legal to use. A classic knifematerial that is pleasing to the eye!
TK3mm
Maroon Micarta is a beautiful oxblood
coloured handle material that is used ongood-quality handmade knives. A thin
coating of oil further enhances the lustre.
TK3mop
Genuine mother-of-pearl is considered tobe among the most exclusive materials in
the world. This is rated AAA, which is thehighest level of quality. Intarsian is also inthe highest class, but I guess that goes
without saying?
TK3jb
Jigged bone is a classic handle materialfrom free-range highland cattle. For morethan a hundred years, bone has been atraditional material for knife handles andis somewhat of a favourite among many
hunters. It is both strong and beautiful andcombines well with a real utility knife.
Tre Kronor 4
TK4 is a workhorse with clean lines
combining lightness with strength. Theslim handle, in rigid composite material,is both lightweight and strong, andcompletely resistant to corrosion andsolvents. With nail-nicks in both sides
of the blade, the knife is completelysymmetrical and as easy to hold for bothleft-handed and right-handed users. Thewell-proven locking mechanism xes the
blade securely in its open position.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 6/15
Exclusive Folding Knives
PRODUCT DETAILS P P/3G U1 U2Length folded (mm) 103 103 86 86Blade length (mm) 77 77 64 64Blade thickness (mm) 3 3 2.5 2.5Weight (knife) 80g 80g 76g 42gSteel VG10 3G 3G SGPSHardness (HRC) 59 62 62 62
Mod. U1
This folding knife is a bit special – it
combines modern steel technology with
a hundred year old, folding knife design.
Mod. U1 lacks a blade lock. This means
that, in many countries, it will most likely
be considered as a pocket knife, and
therefore be allowed to be carried in public
places, with the exception for restaurants,
sports arenas and school grounds. The
blade is instead held in place with an
springsteel key, a technique which has
been in use for more than 100 years
and which ensures that the blade does
not fold. The blade is made of laminate
powder steel, our famous 3G-steel, and
this guarantees edge retention beyondthe ordinary. The handle is made from
stainless liners with the sides in beautiful
cocobolo, ocean blue, or ochre yellow,
smooth bone. It is delivered with a slim-
t black cordura sheath. With nail-nicks in
both sides of the blade back, the knife is
completely symmetrical and is as easily
handled by both left-handed and right-
handed users.
Mod. U2
This is the world’s rst folding knife with a
blade of laminate powder steel, the now
well-proven Super Gold Powder Steel,
SGPS. Powder steel is extremely costly
and difcult to work with, and requires
advanced technological knowledge in
combination with experienced knife
makers. The advantage of this steel lies
in its outstanding edge retention: there
is simply nothing to compare today. The
slim handle consists of strong composite
material, which makes the knife light and
pleasant to carry. With nail-nicks on both
sides, the knife is completely symmetrical
and is as easy to use for both right-
handers and lefthanders. The traditional
lockback function offers no unpleasant
surprises, but locks the blade in its open
position with a distinct reliable click.
Mod. P and P/3G
Many are won over by the simple
but advanced design, and the size is
manifestly just right for both hunters and
anglers. The knife is easy to clean, since
it is open along the back of the handle.
The ability to fold the blade both in and
out with one hand is a detail as practical
as it is smart, and the tight liner-lock
function feels secure. The drop-point
shaped blade is manufactured in rust
resistant special steel (VG10), which
means that it retains its sharpness well.
We also offer a few luxurious models with
a blade in laminate powder steel (3G) and
handle in cocobolo, ocean blue, or ochre
yellow, smooth bone from free range,Highland cattle. All models come with a
black Cordura sheath, which attaches to
the belt.
In some countries it is not permitted tobear a folding knife in public place if theknife is fast-opening, i.e. provided with a
hole in or a stud on the blade. For thatreason we offer model P and P3G with aclassic blade groove; they have an “n” in
their designation.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 7/15
PXL - a sturdy piece
PRODUCT DETAILS PXL
Total length (mm) 199Length folded (mm) 111Blade length (mm) 88Blade thickness (mm) 3.5Steel 3GHardness (HRC) 62
Weight (knife) (176 g) 6.2 ozLocking Liner lock
Big and modern
The PXL is a modern, slightly bigger fold-ing knife for day-to-day use. The stain-less, adjustable blade is manufactured in
laminate powder steel (3G) which meansthat it retains an edge extremely well.
The handle is made of stainless steel andMicarta, but different types of mountingsmay be introduced in the future. The bladelock is of the liner-lock type: You can open
and close the knife with one hand. ThePXL is offered with a strong, removable
clip which allows quick and comfortableaccess to the knife. Note that this foldingknife is a precision-assembled, extremely
sharp tool and should be use with care.In some countries it is not permitted tobear a folding knife in a public place if theknife is fast-opening, i.e. provided with a
hole in or a stud on the blade. For that rea-son we offer the PXL with a classic bladegroove; it has an “n” in its designation
Caring for the knife
A folding knife can naturally never be as
strong as a sheath knife, since it is builtwith a number of moving parts. If you
subject the folding knife to heavy use, itinvariably leads to a loose blade, and no
guarantee covers this.
A modern folding knife should be regularlycleaned with warm water and mild wash-ing-up liquid. Oil and grease should beavoided as far as possible, since today’s
knives have self-lubricating bearings.
Grease etc. contracts dust and dirt andincrease wear rather than reducing it.The easiest way to sharpen the knife isusing a ne diamond whetstone and toachieve the last razor sharp edge, use
a ceramic whetstone. See our DC3 and
DC4 whetstones.
GuaranteeThe two-year guarantee covers manufac-turing aws and defects, i.e. faults that
occur during manufacturing and whichare not noticeable until one starts to usethe knife. The guarantee covers normal
use of the knife and becomes invalid if the knife is used incorrectly.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 8/15
PRODUCT DETAILS NL1 NL2 NL3 NL4 NL5 NL5cx
Total length (mm) 385 323 268 244 215 215Blade length (mm) 250 200 150 130 100 100Blade thickness (mm) 7 6.5 6 5 5 5Blade prole Convex
Tang Full lengthWeight (knife) 520g 380g 280g 190g 180g 180gSteel Lam. VG10 Cowry XHardness 59 HRC 64 HRC
Handle material Leather & Aluminium Nickelsilver
Finger guard Stainless steel Nickelsilver
Northern Light
NL1 Thor
Mod. NL1 Thor is an impressive piece, which
leaves no one unmoved. The blade, a massive
one to say the least, in rust resistant laminatesteel expresses raw strength, combined with a
fantastic bite. It is clear to all and sundry thatthis is an item intended solely for specialists,i.e. woodsmen with long experience of using
edged implements. There is no doubting thatthis is a chopper to withstand heavy use; but
for those who learn to handle the knife, it isalso a exible tool that can carry out practically
any job that might be required of a knife.
Magnicent and incredibly beautiful! A trusty
companion!
NL2 OdenTogether with Thor, the one-eyed Oden (or
Woden) was the highest-ranking god in theNorse sagas. He was the ancestor of godsand humans - riding his eight-legged horseSleipner and accompanied by his bearers of knowledge, the two ravens Hugin and Munin,
he was the undisputed ruler of Valhalla. Mod.NL2 Oden is a powerful, versatile knife with
rust resistant blade in our well-known laminateVG10 steel. Its chopping ability is excellent
and the knife is extremely well balanced. Thewellmade leather handle darkens with age,acquiring a beautiful patina the more the k nifeis used.
NL3 NjordNjord was the god of fertility in the Norse
sagas and was of the Vanir clan. He was alsothe god of sailors and sher men, the ruler of
the coasts and shores. Mod NL3 Njord is a
powerful knife, well balanced and a pleasureto use. It is hard to nd a better-looking all-round knife, and its strength, of course, lies inthe laminate VG10 steel.
NL4 Frej
Frej was the god of peace in the Norse sagas,
but also a god of fertility and prosperity. Hewas the king of trolls and elves, beings that
until quite recently were a reality in the oldfarming society. Mod. NL4 Frej is not merely a
beautiful and compact knife - since the bladeis in laminate VG10 steel, the knife is relatively
strong. Frej is a slender, well-balanced knife
of the highest quality, completely handmade,like the larger models. A friend in woods andelds.
NL5 IDUN
In Norse mythology, Idun was the goddessof fertility, and responsible for guarding theapples that ensured the gods eternal youth.To many, she was also a symbol of love and
rebirth, and in a poem, she was referred to asthe lover of the gods (ása leika). Unlike earlier
models in the Northern Lights series, NL5 is alittle rounder and softer in form, and thereforean excellent choice for a hunting knife. The
straight, fairly generous grip in leather gives
complete control over the powerful blade in
laminate VG10 steel, and makes the knife atool as attractive as it is effective in the hands
of the experienced hunter.
NL5cx IDUN
It is our pleasure to present one of the world’smost advanced hunting knives – Mod. NL5cx
Idun, with a blade in Cowry X Damascus steel.
This is probably the world’s best edge steel,in all categories, and denitely one of the
most exclusive blades ever made. The edge
comprises a powder steel with the followingextreme content: C 3%, Cr 20%, Mo 1%, V
0.3% and iron to 100%. Its hardness is noless than 64 HRC! The sides consist of rust
resistant, 120-layer Damascus steel, and withthe edge of powdered steel, we have formed
a blade, which in its beauty and strength is noless than world class. The ttings are of solidnickel silver, while the rest of the handle is in
stacked leather and bre washers. The knife
is produced as a very limited edition, which
means that demand is sometimes greater than supply. The knife is an excellent tool for
all, but in all probability, most customers willacquire it for its exclusive collectability.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 9/15
PRODUCT DETAILS WM1 WM1/3G H1 H1/3G
Total length (mm) 175 210Blade length (mm) 71 100Blade thickness (mm) 3 5Blade prole Convex
Tang Broad Full-lengthWeight (knife) 70g 180gSteel VG10 3G Lam. VG10 3GHardness (HRC) 59 62 59 62
Handle material ThermorunSheath Zytel
Hunting Knives
WM1 - The little favourite!
In most cases, a 7 cm long blade issufcient for hunting, especially if it is
3 mm thick and convex ground so that
it is both strong and sharp. Initially, wethought that WM1 would be a specialknife for hunters of small game, but as itturned out many other types of customer were interested in this model. Then,when we offered a plastic sheath, whichallowed the knife to be carried round theneck or in any pocket, it became a totalsuccess! Mountain climbers, canoeists,mountain bikers, hikers - everyone saw
how incredibly smart it is to carry theknife round the neck, easy to see, andimmediately accessible. The same sheathcan be just as easily attached to the belt.
If you want considerably improved edgeretention, this handy knife also comeswith a blade in laminate powder steel,called WM1/3G.
H1 - The big game hunter´s dream
Although the material in this knife is high-tech, the design comes from classic NorthScandinavian knife making traditions. The
long skinning curve, in combination with
the elegantly formed tip, make this knifesomething of a big game hunter’s dream- one of the world’s best hunting knives.
The blade ridge is no less than 5 mmthick, but the edge is still sharp and stableenough to cut wood, because it is convexground. The full handle, in checkedThermorun, gives a sure and comfortable
grip. Since the knife lacks a nger-guard,
an advanced knife, such as Mod. H1, is
best suited to experienced hunters or
woodsmen. A moulded plastic sheath inzytel is added. Hunters normally tend to
like knives with extreme edge retentionand, for them, we now have the H1 with
laminate powder steel 3G, the H1/3G.Unbeatable!
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 10/15
PRODUCT DETAILS F1M F1 F1/3G
Total length (mm) 210 210 210Blade length (mm) 100 97 97Blade thickness (mm) 4.5Blade prole Convex
Tang Full BroadWeight (knife) 200g 150g 150gSteel Lam. VG10 3GHardness (HRC) 59 59 62
Handle material Micarta ThermorunSheath Leather Leather, Zytel
Hunting and Survival Knives
Mod. F1 – our rst knife!
It took us eight years to develop the mod.
F1, a knife that is in use today with theSwedish Air Force as a survival knife. The
result from extensive eld-testing, carried
out on hot summer days and ice-coldwinter nights, was an advanced, well-
designed and safe knife, where strengthand modern design go hand-in-hand. Thefact that it is also very well thought of by
the civilian market testies to its incredibleversatility. The combination of resilient,
laminate special steel and sure grip isattractive to most. Many get on very well
with this knife, which over the years has
become something of a signature for our company. Is there a better knife thissize?
F1 Micarta
It is especially exciting to handle a
completely handmade knife, with theenduring knowledge that a skilledcraftsman has put his soul intomanufacturing this particular knife. Theblade continues through the handle atfull breadth, which gives the knife extra
solid weight in the hand. For those after a slightly more exclusive knife, this is
an excellent choice - it is hard to nd a
better-looking hunting knife. Comes with
an all black leather sheath.
F1/3G
Many years ago, when we began the de-velopment of our now famous knife series
Tre Kronor, we wanted to test something
new: A completely unknown laminate
powder steel. Our own tests went well,but we also wanted to test the steel onthe open market in order, so to speak, tobe on the safe side. So, we manufactured110 F1-knives using this 3G steel, knives
which were then sold all over the world.
The reactions were, to say the least, posi-tive. And so we could start manufacturingour most exclusive knife series.
Limited edition
What we hadn’t counted on however was
that the market was never going to forget
our bestselling F1 with this super steel -ever since this test series appeared we
have received enquiries from all over
the world whether it is possible to buythe F1/3G. Evidently, the combination
of pleasant design and true super steelwas something people could not get over!
Therefore, to mark our 25th anniversary,
we are now launching a limited series of 1,000 F1/3G knives. They are due to go
on sale in summer 2009. The knife willonly be manufactured with a shiny blade,and one characteristic is the special logo-type with two crowns on either side of theoval which marks the unique edition.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 11/15
Mod. S1 - Forest Knife
PRODUCT DETAILS S1
Total length 247 mmBlade length 130 mmBlade thickness 5 mmBlade prole Convex
Tang Full-lengthWeight (knife) 190gSteel Lam. VG10Hardness 59 HRCHandle material ThermorunSheath Leather, Zytel
Make your own knife! Laser Engraving
World-class knife blades
Now you can make your own highlypersonalised version of one of our most
sought after models. Since the blade tangfollows the handle contours of the originalmodel, these blades are extra strong and
stable. The blade and nger-guard arecompletely nished, all you need to do is
nd some good looking pieces of wood
(or why not horn, bone or some other attractive material, let your imagination
run free!), buy some threaded rivets
and a short piece of pipe (available fromknife makers and accessory rms), and
then you can start! If you do not wish tomake your own sheath, you can buy oneseparately, and be certain that it will bewell tting, as long as the new handle
follows the original shape. Making your own knife is really fun and the knowledgethat you are working with one of theworld’s best edging steels (VG10, lam.VG10) should ensure that you do your best to make the knife as beautiful anduseful as possible, and with a personaltouch.
The value of a gift or promotional item issignicantly increased if it is engraved
with a logotype, message or a name.We have invested in one of the most
modern bre laser machines of Europe,
which make it possible for us to quicklyand easily personalize your knife, at areasonable cost. Since this is done inour own regime and at the same location,no extra shipping fees are added and
the requirement for large volumes, to
keep the cost per unit down, is reducedconsiderably.
It is now possible to engrave a name
on a single knife for a reasonable price.This new kind of laser engraving is
very environmental friendly – there
are no water or air discharges and theenergy consumption is very low. The
laser engraving gives a very distinctand detailed image, which is why even
complicated logotypes can be clearlyreproduced. For detailed price anddelivery information – visit our website or
call for information.
Mod. S1 – For woodsmen and mountain
hikersS1 is the right choice for scouts andmountain hikers who want the highestquality at the lowest weight. For huntingand shing too, this knife is excellent,
whether knocking the life out of a pikeor dressing out a moose or deer. Theblade - 13 centimetres long, has a certainchopping capability, and the ve millimetre
thick blade, in specially tempered laminate
VG10 steel, will withstand heavy use. Itcan also be added that the Mod. S1 is theworld’s rst rust resistant sheath knife with
a convex ground edge. Either you can
choose between an open, hinged leather sheath or a double secured all weather sheath in injection moulded Zytel.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 12/15
Survival Knives Military Knives
PRODUCT DETAILS A1 A2
Total length (mm) 280 325Blade length (mm) 160 202Blade thickness (mm) 6Blade prole Convex
Tang BroadWeight (knife) 310 g 370 gSteel Lam.VG10Hardness 59 HRC
Handle material Kraton®
Sheath Zytel Leather
PRODUCT DETAILS G1 MC1
Total length (mm) 190 360Blade length (mm) 90 237Blade thickness (mm) 4.5 6Weight (knife) 90 g 360 gSteel VG10Hardness 59 HRCHandle material Thermorun Kraton®
Coating CC 8H -
Sheath Zytel Zytel
A2 – a strong expeditionary knife
When you are really far from the nearesthabitation, you must be able to trust your equipment. Some items must never fail, and
have got to withstand practically anything.
Mod. A2 is an example of a strong knife that
will never let you down, a knife that withstands
heavy use. The reason for its remarkableperformance is that we use a newly developed
laminate rust resistant steel, where the edgeconsists of our now famous VG10, and wherethe sides are made from resilient 420J2 st eel.The combination of these different types of steel gives a blade that both retains its edgevery well, and is fantastically strong. Since we
ship this knife with a convex edge, it is suitable
for both cutting and chopping. A well-sewnsheath in extra strong ox leather is added. For
expeditions and hard outdoor life, Mod. A2 isa given companion.
A1 - military favourite
This knife has become something of afavourite in military circles, where the need is
for a strong, reliable and safe knife, while atthe same time as heavy, clumsy equipmentis avoided. The civilian world, naturally, has
the same requirements - who does not wanta reliable companion attached to their beltwhen they are going to be out for a week?Despite its size, Mod. A1 is a versatile and
well-balanced concept, and internationallyabout the best money can buy. The 6 mmthick blade, in laminate VG10 steel, is very
strong, and since the knife is provided with a
convex edge, it cuts well even in wood. The
black surface is of Ceracoat 8H for protectionagainst reections and corrosion. Delivered
with a moulded plastic sheath in zytel.
Mod. MC1 - the mine clearance knifeThe development of the Mod. MC1
resulted from an ofcial request from a
NATO country. The knife has been usedin mine clearance since spring 2002. Theway the blade is ground is, in itself, wortha little extra attention - we start with a rawpiece of steel over 6 mm thick, and use a
grindstone with a very large diameter. This
gives a slightly concave prole, which we
nish with convex grinding - by hand! The
result is an edge that is extremely sharp,but also robust. The handle is made outof grip safe Kraton, a material which has
a good stability and is totally insensitive to
solvents, oils and DEET. The tang is of a
broad, protruding type and is visible at the
end of the grip, as in many of our knives.The knife is shipped with a double lockingZytel sheath.
Mod. G1 - Garm Fighter
Mod. G1 is a small, interesting sheathknife for military use. We use advanced
special steel, our now famous VG10, toensure strength and good edge retention.The blade is coated in black Ceracoat
8H to prevent reections and corrosion.The symmetrical handle, in Thermorun,gives the best possible grip. The knife is
shipped with a Zytel sheath that allows,for example, the knife to be carried round
the neck, if this is preferred to having theknife in a pocket.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 13/15
PRODUCT DETAILS F2 F3 F4
Blade length (mm) 110 130 150Blade thickness (mm) 2.5Blade prole Convex
Tang BroadSteel Lam. VG10Hardness 59 HRC
Handle material ThermorunSheath Zytel
The Professional Butcher´s Knives Chef´s Knives
PRODUCT DETAILS K1 K2
Total length (mm) 330 305Blade length (mm) 200 175Blade width (mm) 46 47Tang BroadSteel Lam. VG10Hardness 59 HRC
Handle material Thermorun
New quality concept
F2, F3 and F4 are a new concept in high-quality knives intended for opening, butcher -ing and cleaning sh. They are based on the
well shaped, secure F handle, and for it wehave developed three blade shapes, each
adapted to its special purpose. Unlike manyother manufacturers we persist in using reallygood edging steel and even if it leads to prod-ucts that are 5 or 10 times more expensive, wefeel that the concept is right. A cheap dress-ing knife is characterised by poor edge reten-tion, leading to it fairly soon being honed todestruction, while a knife from us can be usedfor decades. Not only does this lead to goodoverall economy, but also offers satisfaction
and safety at work. Naturally, it need not beput away after the hunting, but can also serve
its purpose in the kitchen. The knives are sup -plied with a zytel edge protector. The best,simplest and quickest way to sharpen them iswith a diamond whetstone or diamond sharp-ening steel: see our products DC4 and D12.
Mod. F2This knife has a broad range of use. The short,fairly slender blade works well for lleting, cut -ting and cleaning sh. The short blade makes
the knife something of a favourite in the kitch -en, it cuts anything quickly and precisely.
Mod. F3
I think this is the perfect dressing and skinningknife! The form of the blade is ideal to skinsomewhat larger game and then open it be-fore hanging. Since the edge can be made thinwithout losing in strength, the edge will easilypart the thickest skin, which the user shouldperhaps bear in mind – to avoid mis haps.
Mod. F4
When separating somewhat larger cuts it isa clear advantage to have a longer blade: it
gives a more even, cleaner cut. I myself havetried lleting sh with this knife, and it worked
excellently - the narrow but fairly rigid blade
cuts precisely right through the whole lengthof an eight kilo salmon.
K1 and K2 – light weight, hygienic,sharp!
The most striking thing is how extremely
sharp these knives are and how well they
lie in the hand. There are truly few knives
in the world that can offer such incrediblygood properties at such an attractiveprice. The remarkable fact is that wemanufacture these knives in laminate
VG10 steel since this type of steel isparticularly exclusive, expensive and
difcult to work. Add to this a comfortable,secure, hygienic handle, and you have a
combination that is practically impossibleto beat. For those allergic to nickel, theseknives should be perfect.
Two favourites in the kitchen!Mod. K1 is the classic chef’s knife, withan edge that cuts in both directions. It isa pleasure to handle this unusually lightbut solid knife - it feels like cutting withan extension of your own arm, completely
without effort. This knife is highlyrecommended!Mod. K2 is a must for the modernkitchen! Finely sliced, fresh vegetables
are not only good for our well-being - theyare also eye pleasing and very tast y. Only
the perfectly designed Japanese santokuknife can achieve this.
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 14/15
Combination whetstones
The DC3 and DC4 sharpeners are newly
developed combination whetstones,
where one side (the bright one) is ane diamond whetstone (25 micron),
and the other (the dark one) is a ne
ceramic whetstone. A leather case isincluded. The yellow surface consists of titanium aluminium nitride (TAN) whichconsiderable prolongs the functionallife of the whetstone. We recommend acombination of diamond and ceramic,where the diamond whetstone restoresthe wedge form of the blade edge, andthe ceramic whetstone smoothes theedge to obtain long-term sharpness.Most of the time the sharpness provided
by the diamond whetstone is more thanenough.
D3 and D4
The edge obtained with a diamondwhetstone is often sharp enough – youseldom need razor sharpness. It is even
possible that the micro-serration obtainedwith a diamond whetstone cuts faster than a smooth, razor-sharp edge. For that reason we offer some whetstoneswhose surface comprises solelyindustrial diamonds, coated with titanium-aluminium nitride (TAN). Shipped with abrown leather case.
D3t och D4t
The same whetstone as above, but
instead of a leather case it is shipped withdouble-sided tape which allows you tofasten it where you wish, for example on
our zytel sheaths. The tape (VHB 5925F)is very strong and sticks like cement after
24 hours. In size, the D3t ts the plastic
sheaths for the F1, H1 and S1, while D4tts the plastic sheath for the A1.
Fine sharpening steel
Modell D12 is an oval, ne diamond
sharpening steel for use with kitchenknives. The C12 steel is ceramic and isused after the diamond steel to obtain along-term edge. We recommend thesesteels, since we know they work on alltype of knives, especially knives with
blades of special steel or powder st eel.
How to sharpen the knife
When a knife becomes dull, the wedgeform of the edge has become so roundedthat its original appearance must berestored before the knife can cut again.This can be managed for a long time witha whetstone, but eventually the angle
needs to be reset. This is done with thehelp of a grindstone or belt driven knife-grinder, both water-cooled.
How to use the whetstones:
Lay the blade at on the whetstone, raise
the ridge of the blade by its own thicknessand move the blade in circles or gures
of eight. Alternatively, try cutting thin
slices from the whetstone! Impossible,of course, but now you are holding theknife at the right angle and making theright movement. Start with the diamondwhetstone, and nish with the ceramic
whetstone.
The felt-tip trick
It can be difcult to see where on the edge
the whetstone is working, but the followingtrick can make it much easier. Colour the
edge with a felt-tip pen or similar, and itwill immediately be easier to see exactly
where the sharpening occurs.
Test the sharpness
The best way to test the sharpness is todraw very lightly the edge on a ngernail.
You can feel directly whether the knife is
sharp or not, and it is a fairly safe way totest the sharpness.
Convex edge
Several of our knives have a convex edge
(axe edge). This kind of edge can seem
difcult to sharpen. However, if you use
a handheld diamond whetstone and theabove mentioned felt-tip trick, it is fairly
easy to sharpen the convex edge, but as
with everything, practice makes perfect.
Grinding serviceAfter some years’ active use, the edge
nally becomes so thick that the blade
needs to be re-ground, that is, slimmeddown so that you can continue to use awhetstone or steel on your knife. If youdo not have access to machines or the
know-how to do this, you can send theknife to us for re-grinding. We grind theknife in-house, restoring it practically to
the original form and nish.
Whetstones
Accessories
8/7/2019 catalog fallkniven_eng_2009
http://slidepdf.com/reader/full/catalog-fallkniveneng2009 15/15
Address Telephone Telefax Internet E-mail
Granatvägen 8 0921-544 22 0921-544 33 www.fallkniven.com [email protected]
S- 961 43 Boden Int. +46-921 544 22 Int.+46-921 544 33Sweden
Fällkniven AB in brief
We are a genuine family rm, with roots deep in the
soil of Norrbotten (in Sweden). We have hunted and
shed for decades, and know from experience how
a knife should work. The company was founded in1984 and today we are considered one of the world’sforemost knife specialists. We began developing
our own knives in 1987 and this is now the main
operation at Fällkniven AB.
Sheaths
We have paid special attention to manufacturing
sheaths that are as functional as possible, since it isthe sheath that determines the knife’s accessibility.
We are alone in offering several different sheathsfor each model. Generally, you can choose betweenan attractive, well-sewn leather sheath and an all-
weather moulded sheath of super strong zytel. Theleather sheath should not be greased, but treatedwith shoe polish or wax, for example, to make it water
repellent.
Design philosophy
Each knife is the result of years of hard work andtesting. Besides our own tests, we commission LuleåUniversity of Technology to test the breaking strength
of our knives – see our website. This means that you
can rely on our knives, even in extreme situations.
We are the only rm in the world that only uses
exclusive special steel, which assures that our knives
are of the highest level of quality.
Rust-resistant special steel
VG10 is a costly steel that is hard to work, butwhich, when correctly hardened and tempered,gives a blade that is resilient and hard, as well as
practically stainless. Nowadays, we hardly ever use
anything but laminate blades, as these are about20% stronger than a solid blade. With an outer layer
of 420J2 and an edge made of VG10 you get a bladethat is extremely strong and retains its sharpness for
a very long time.
Damascus steel
The art of manufacturing Damascus steel is morethan a thousand years old. By forging together layers of different types of steel, we obtain a bladethat is both beautiful and strong. In the exclusive
sheath knife NL5cx, we have added a powder steel
(Cowry X) thereby combining extreme sharpness
with unusual beauty.
Powder steel
Our experience with laminate powder steel is very
good. Although powder steel is expensive and
difcult to work, we believe that in the future quality
knives will have an edge of powder steel, since no
other material rivals it for edge retention. You ndpowder steel in more than half of our products andthat percentage will increase in the future.
Black blades
The black Teon coating protects the blade from
corrosive substances and eliminates unwanted
reections. Our new Ceracoat 8H coating is as strong
as one could wish for – achieving a long term black
coating on a completely smooth stainless surface, isnot possible, which is why it should not be expected
it to withstand any amount of rough handling. For salt-water environments etc., we recommend knives
with this black surface.
Handle material
The shape, hardness and material of the handleensure the knife’s ergonomic design and sureness of
grip. Wear-resistance, sensitivity to chemicals and
UV light are parameters optimally adapted in order that the knife shall work safely for many years.
Warranty
We offer a two-year guarantee covering material and
manufacturing defects, i.e. defects that arise duringmanufacture but are not discovered until the knife is
in use. A defect is generally discovered within half a
year, not after several years. We repair or replace
the knife. The guarantee is not valid if the knife has
been used incorrectly — the knife is a precisioncutting implement and is not to be used for levering
or prising. Discolouring caused by blood, salt-water or other corrosive substances is not covered by
the guarantee, neither are broken blade points.The sheath will be replaced if faults in the originalmanufacturing are found.
Care instructions — sheath knife
The easiest way to take care of a knife is to keep itclean and dry. Wash it in water with a small amountof washing-up liquid and make sure that it is properlydried afterwards. The blade needs not be oiled or greased, however some handles will acquire a
deeper and more beautiful patina if it is treatedwith wood oil or linseed oil. The sheath does notin fact need any maintenance, but a silicone basedshoe cream or wax will improve the water resistant
properties of the surface. Grease should not be usedsince it makes the leather soft.
Care instructions - folding knife
Since a folding knife is manufactured with several
moving parts, it naturally cannot be as strong as
a sheath knife. If a folding knife is subjected to
heavy-handed treatment, it will invariably result in
a loose blade, with unreliable blade locking. Thisis not covered by the guarantee. A suitable way to
clean a modern folding knife is with water and a littlewashing-up liquid. Oil and grease should be avoided
as far as possible since today’s folding knives
have self-lubricating bearings. Grease and similar
substances attract dust and dirt and increase rather than reduce wear.