SPECIALISTS IN PRECAST TECHNOLOGY
BED CLEANER
Versatile and efficient multi-purpose vehicle
www.spiroll.co.uk A CCL Group Company
www.spiroll.co.uk
The Bed Cleaner is a multi-purpose machine that speeds up the labour-intensive jobs in the preparation of hollowcore casting beds. It can be powered via a low-emission diesel engine, battery or electrically.
The cleaner sprays mould oil/release agent while three rotating brushes clean both the bed pallet and chamfer rails. Capable of pulling up to 10 x 12.5 mm prestressing strands, it incorporates an interchangeable cover roller, which lays and uplifts the insulation covers used to accelerate the curing time of slabs.
From the safety of the protective cabin, the operator controls the unit hydraulically at speeds ranging from 25 to 40 metres per minute.
SPIROLL BED CLEANER
SPECIFICATIONS
Length 4.90 m
Width 2.14 m
Height 2.40 m
Weight 2,800 kg
Engine 4-cylinder diesel
Motors 31.5 kW @ 2500 rpm
Drive 2 travel speeds 4WD
Travel Speed 40 m/min
Sprayer Tank 45 Litres
Strand Puller 10 x 12.5 mm strands
FEATURES• Rotating main bed brush
• Two additional chamfer rail brushes
• Six mould oil spray nozzles
• Pulls up to 10 x 12.5 mm strands
• Slab insulation cover roller
• Low-emission, 4-cylinder diesel engine
• Optional battery/electrically-powered version
T: +44 (0) 113 270 1221 E: [email protected]
Spiroll accepts no liability for any errors or omissions in this document. Details may be changed without notice.