A. MASONRY GUIDE FIXING
A B
B. STEELWORK GUIDE FIXING
157 95
3030
VerticalSlot
PLAN
CLEAR OPENING WIDTH OF SHUTTER
SOFFIT ANGLE
DIRECT DRIVEMOTOR CLEARANCE
GALVANISEDSTEEL HOOD
150
230184 184 336
DIM C
A
A
L
R
SECTION A - A
OP
ENIN
G H
EIG
HT
130DIM D
ELEVATION DIMENSION A 350 DIMENSION A 350
FITTING SPACE FOR CONTROLS
min 60
SPACE FOR CONNECTING CABLE
190
30
0
HEAD ROOM CLEARANCE (DIM B)
184
FIREFLEX-SFIRE ROLLER SHUTTER - DATA SHEET
TEST: BRE Test report number 220737
ASSESSMENT: Assessment report number CC 224355
INETGRITY: 240 minutes
SHUTTER CURTAINManufactured from pre-galvanized material, 75mm curved lath.The curtain, when assembled is held in position with purposely-designedend fittings, which act as a curtain alignment system. The bottom panel ofthe shutter is terminated with a galvanized steel angle with horizontal andvertical slots.
BARRELManufactured from seamless mild steel tube to BS4760 Grade 50C.Maximum barrel deflection measured at 1:400, fitted with precision-machined BDMS axles to BS970 EN33 with end fitted plate wheel.
MAIN SUPPORT BRACKETSMain support plates for the barrel and motor unit manufactured from mild steel.Support plates to BS 4360/43A with perimeter welded angles and structuresupport angles.
VERTICAL SIDE GUIDESFormed from pre-galvanized material having a minimum thickness of 2.5mm.The door guide is designed to allow reduced working face and tapered innerfaces to provide automatic interlock/retaining feature.
OPERATIONThe door is arranged for an electric motor unit with fusible link or solenoidrelease unit complete with built on starter, or direct drive maintained power.
Technical informationCertificationCE Mark (Declaration of conformity)
Type Approval (Chiltern Dynamics - UKAS approved test laboratory)
Testing Laboratory (BRE Testing – UKAS approved test laboratory)
Compliant with Part 1 BS EN 13241-1: 2003
Mechanical Aspects EN12604, Safety in use of power operated doors.
Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3
Protection Against crushing, shearing or drawing in
Electrical Safety Depending on the use
Water Tightness EN 12489
Resistance to Wind Load EN 12444
Fire Resistance test B.S.476 : Part 22 : 1987
Integrity 241 minutes (4 hours)
Air permeability EN 12427
Gravity and self-closing EN 12453 - 5.1.1.5
Anti fall back device EN 12453 - 5.1.1.5
Installation Instructions EN 12635: 2002 4.1.1.1
Durability of Mechanical Performance EN 12635: 2002 4.1.1.1
EC Declaration of ConformityAccording to BS EN 13241-1:2003
Manufacturer: Insulated Roller Shutter Products
A DIVISION OF P&D GROUP SERVICES LTD
Product Description: Power operated Roller Shutter Door systems
Equipped with ELEKTROMATEN® Safedrive
Operator sizes 170Nm –1400Nm
Complies with the following EC Guidelines
89/106/ EC Construction Products Directive
73/23EEC Low Voltage Directive
98/37/EC Machinery Directive
89/336/EEC Electromagnetic Compatibility Directive
We hereby certify that the above-mentioned products comply with the following
standards when used accordingly to their determination:
BS EN 13241-1 Annex ZA Water tightness BS EN 12489:2000 Chilt/P05003/01
Resistance to wind load BS EN 12444:2000 Chilt/P05003/01
Air permeability BS EN 12427:2000 Chilt/P05003/01
Operating forces BS EN 12453:2000 Chilt/PO5003/03
Safeguarding against dropping BS EN 12604:2000 TorFV 4/023/024/025/026
Approved Laboratories:
Chiltern Dynamics Stocking Lane, Hughenden Valley High Wycombe HP14 4AD
The Machinery to which this declaration of conformity relates must not be put into service until it has
been completely and safely assembled and installed in accordance with the manufacturers instructions
and not until the complete installation has been declared to be in conformity with the provisions of the
machinery directive.
This declaration is made by
GRAHAM DANKS
MANAGING DIRECTOR
INSULATED ROLLER SHUTTER PRODUCTS
Graham Danks
THETHE
'PROTECTIVEPROTECTIVE'
SOLUTIONSOLUTION
THE
'PROTECTIVE'
SOLUTION
Manufactured by
A Division of P&D Group Services Ltd
C
Door hood addition - Dim B + 50 All Dimensions in mm
WIDTH HEIGHT DIM A DIM B
2500 2500 400 450
3000 3000 450 500
4000 4000 450 500
5000 5000 500 550
6000 6000 550 600
7000 7000 600 650Motor Controlled DescentDirect Drive Power to Close
JOB No:
ORDER No:
OPENING HEIGHT:
OPENING WIDTH:
GUIDE TYPE:
DELIVERY DATE:
DELIVERY ADDRESS:
GENERAL NOTES:
Manufactured by A Division of P&D Group Services Ltd
THETHE
'PROTECTIVEPROTECTIVE'
SOLUTIONSOLUTION
THE
'PROTECTIVE'
SOLUTION
FIRE ROLLER SHUTTER
SHUTTER CURTAINManufactured from pre-galvanizedmaterial, 75mm curved lath.The curtain, when assembled isheld in position with purposelydesigned end fittings, which act asa curtain alignment system. Thebottom panel of the shutter isterminated with a galvanized steelangle with horizontal and verticalslots.
OPERATIONThe door is arranged for an electricmotor unit with fusible link orsolenoid release unit complete withbuilt on starter, or direct drivemaintained power.
FIREFLEX S - THE PROTECTIVE SOLUTION
A. MASONRY GUIDE FIXING
A B
B. STEELWORK GUIDE FIXING
157 95
3030
VerticalSlot
PLAN
CLEAR OPENING WIDTH OF SHUTTER
SOFFIT ANGLE
DIRECT DRIVEMOTOR CLEARANCE
GALVANISEDSTEEL HOOD
150
230184 184 336
DIM C
A
A
L
R
SECTION A - A
OP
ENIN
G H
EIG
HT
130DIM D
ELEVATION DIMENSION A 350 DIMENSION A 350
FITTING SPACE FOR CONTROLS
min 60
SPACE FOR CONNECTING CABLE
190
30
0
HEAD ROOM CLEARANCE (DIM B)
184
C
Door hood addition - Dim B + 50 All Dimensions in mm
WIDTH HEIGHT DIM A DIM B2500 2500 350 450
3000 3000 400 500
4000 4000 400 5505000 5000 450 600
6000 6000 500 650
ORDER INFORMATION
Dock Shelters
Resellers’ price list
Nr. LS09-2
Armo s.p.a. – Via Rosa di Luxemburg, 1 – 10093 Collegno (To) Italy
Tel: +39-011-7176011 Fax: +39-011-7176019
E-mail:[email protected] Web: http://www.armoweb.com
armo armo armo armo
Resellers’ price list
Pag. 2 di 3
Dock shelters are necessary to correctly isolate your staff and goods of your
warehouses from bad weather conditions and sudden variations of temperature.
With the installation of ARMO dock shelters you save on a lot of energy.
STRUCTURE
� Dock shelter with front part in black rubber with differential stiffness.
� Opening/closing device through swinging scissors. The truck, by coming back,
can press the dock shelter structure without causing damages.
� Self-carrying structure in SENDMIR galvanized steel tube, telescopic type, to
deaden possible impacts with trucks.
� Structure front part in pre-painted white steel.
� Frontal realized in anti-wearing black rubber plates with anti-cut warp
� Covering tarpaulin in polyester PVC, anti-flame Class 2
� Warning arrows to centre the truck.
armo armo armo armo
Resellers’ price list
Pag. 3 di 3
Flat roof model PIW-S
Structure characteristics
Outside width mm 3400
Side panels mm 700
Upper panel mm 1000
Outside height mm 3500
Depth mm 650
Flat roof model PIW-T
Structure characteristics
Outside width mm 3400
Side panels mm 700
Upper panel mm 1000
Outside height mm 4500
Depth mm 650
Tech. features can change without advise. This booklet is not to be considered as a contract and all the
information are to be considered as advises. Errors and omissis can be found. Photos and drawings are for
illustration proposal only.