• No landline needed – uses GSM cellular network• Great solution for VoIP users• Monitors all controllers with an alarm output, from
simple thermostats to fully integrated systems• Receive a daily status message from the Wireless
Alarm Manager• Monitor power outages – alarm continues to send
messages for 10-hours after a power failure• Sends a text message to 1 to 4 cell phones• Check your greenhouse status anytime, anywhere• Easily programmed by text message or email• Monitors up to 4 individual alarm circuits• Selectable delayed response time• Continues to send reminder alarm texts until alarm
is reset• Password protected• Programmable ID specifies which controller is in alarm• Back-up rechargeable battery warns when voltage
is low• Easy to wire
SPECIFICATIONS• Requires text messaging through a Global System
for Mobile communication (GSM) service carrier• 120 volt power source (which alarm will monitor
for power outages)• Requires user purchased SIM card
(Subscriber Identity Module) • Dimensions: 5.625”x 3.250”x 1.375”• Part # M-5810
Alarm Managers
Alarm Manager Cellular Alarm Manager Ethernet Alarm Manager
The Alarm Managers communicate directly with your environmental control so when the greenhouse temperature is in alarm condition, or in the event of a power failure, they contactup to four phone numbers and send an alert. These remarkable devices persevere until thealarm is acknowledged.
• Assign a “normal state” for each input• Create a call list with up to eight phone numbers• Determine a time delay for each input• Record a custom message that indicates the location
of the alarm (e.g. North house cold)• Monitors eight dry contact inputs• Power alarm calls you if the system’s power is cut off• Rechargeable back-up battery if power outages occur• Plug-in wall transformer, splitter and phone extension
cable included• FCC approved and registered• Meshes with control complexity levels – from a simple
thermostat (hot/cold) system to a fully integrated control
• Easy plug and play installation with EnviroSTEP, VersiSTEP, STEP Up and Versatile Vent controls
SPECIFICATIONS• Requires 0.1 amp @ 115 VAC• Dimensions: 8.79” x 4.62” x 2.25”• Part # M-5800
To find out more call 800.821.5829, email [email protected] or visit www.wadsworthcontrols.com
• Expands capabilities of our Alarm Manager to include Ethernet
• Redundancy of landline and Ethernet keeps your crop doubly safe
• Must download and connect Data Capture app for Ethernet to function
• Integrated auto-dialer, Ethernet port• Monitors up to eight (8) inputs/zones• LCD displays real time data• Displays minimum and maximum temperatures• Network ready – onboard memory• Programmable alarm delay• Record identification message for each
input/zone• Uses standard analog phone line• Monitors power• 24-hour rechargeable backup battery• Sends emails• No monitoring fees
SPECIFICATIONS• Splitter, telephone extension and Ethernet
cable included• FCC Approved and Registered. • Requires analog phone line.• Operating temperature range 32°F to 125°F• Dimensions: 5.0" x 7.5" x 1.75" (W x L x H)