ZTE – Wireless Module Expert

ZTE corporation All rights reserved.www.ztewelink.com

01 2014

ZTE Showed Star Module products in 2014 CES

ZTE Showed in 2014 MWC and CeBIT

Introduction about Openlink of ZTE modules

New Module Products in 2013MG2639_V3

MC5610

MW3820

LTE Module Products LTE Module - ME3760

LTE Module - ME3960

ZTE showed Star Module Products in 2014 CES

1. Module Expert presentation

2. Module Zone

1 2

ZTE Showed in 2014 MWC and CeBIT

MWC, 24th~27th,Feb., 2014

CeBIT, 10th~14th, Mar., 2014

ZTE M2M Zone

1~3. ZTE Booth

4. ZTE M2M Zone

01

03

05

02

04

06

New Module Products in 2013

MG2639_V3

MC5610

Frequency Band GSM/GPRS 850/900/1800/1900 MHz

Form Factor LCC (60Pin)

Dimension 30×25×2.68mm

Data rate DL 85.6Kbps/UL 42.8Kbps

Temperature Working Temperature: -40OC~+80OC Storage Temperature: -40OC~+85OC

Power Supply 3.3V~4.25V/Typical Voltage3.9V

Power Consumption Standby 2mA

Features Support data, SMS, etc.

Interface

Dual-UART interface, one of them is full flow controlUSB 2.0(Full Speed)I2C interface, keyboard, LCD, high expansibilityExternal antenna

Applications

Support embedded TCP/IP protocol. Support GPS + Beidou/GLONASS(optional)Support OpenLink (optional)Support standard AT commands sets and ZTEWelink extended AT command sets

Certification CCC/CMIIT/CE/FCC/RoHS

MG2639_V3 is a GPRS module which is

designed base on MTK GNSS solutions, with

60PIN LCC form factor, fully compatible

with MG2639_V2 & MC8332 on hardware.

This module can be widely used in vehicle

navigation, intelligent household, power

monitoring, wireless POS, environmental

monitoring, and many other M2M industry.

Step by step, MG2639_V3 will fully replace

MG2639 and MG2639_V2.

MC5610 is a CDMA 1X module with in LCC

form factor. It can be widely used in many

M2M industry such as data transmission,

electricity, POS, monitoring and automotive

field.

Specification

SpecificationFrequency Band CDMA 1X 450MHz C

Form Factor LCC (74Pin)

Dimension 38.5×33.5×3.4mm

Data rate DL 153.6Kbps/UL 153.6Kbps

Temperature Working Temperature: -30OC~+ 75OC Storage Temperature: -40OC~+85OC

Power Supply 3.3V~4.25V/Typical Voltage3.8V Power Consumption Standby 5mA

Features Support data, SMS, etc.

Interface

UART interfaceUSB 2.0(Full Speed)Support I2C interface, keyboard, LCDExternal antenna

ApplicationsSupport embedded TCP/IP protocol. Support standard AT commands sets and ZTEWelink extended AT command sets

Certification TBD

For more detailed specification, please visit: www.ztewelink.com/support/

New Module Products in 2013

MW3820

MW3820 is a high speed HSPA+ module

with LGA form factor. It can provide 21M

download speed and be widely used in

tablet, personal consumer electronics

industry, monitoring, automotive and

many other M2M industry.

Specification

Frequency BandGSM/GPRS/EDGE: 850/900/1800/1900 MHz

HSPA+/WCDMA: 850(900)/(1900)2100 MHz

Form Factor LGA (108Pin), P2P compatible with the company’s other LGA module

Dimension 36×26×2.55mm

Data rate DL 21 Mbps/UL 5.76 Kbps

TemperatureWorking Temperature: -40OC~+ 80OC

Storage Temperature: -40OC~+ 90OC

Power Supply 3.3V~4.2V/Typical Voltage3.8V

Power Consumption Standby 2.1mA

Features Support data, SMS, ,MMS, USSD, STK, contacts

Interface

Dual-UART interface

USB 2.0(High Speed)

I2C interface, keyboard, LCD, high expansibility

External antenna

Applications

Support USB sleep and wakeup, selective suspension, low

consumption

LED display, USIM service, RAS dial

Support embedded TCP/IP protocol

Support standard AT commands sets and ZTEWelink extended AT

command sets

DriversWindows XP/7/8, Android 2.x/3.x/4.0

Linux 2.6.20 and later, WinCE5.0/6.0/windows Mobile

Certification CCC/CMIIT/CE/FCC/RoHS

For more detailed specification, please visit: www.ztewelink.com/support/

LTE Module Products

LTE Module - ME3760

LTE Module - ME3960

ME3760 is a LTE module, which is designed on ZTE self-R&D

chipset and platform, can support TD-LTE/TD-S/FDD LTE/GSM.

ME3760 can be applied not only in TD-LTE operators’ market at

home and abroad, but also in the domestic private market in 1.4GHz,

1.8GHz and other special band network.

With the large-scale construction of China Mobile TD-LTE networks,

there have been much unprecedented opportunities for LTE

module private band application, including 4G services in mine

field, smart city national Grid and other M2M industry. As a new 4G

products, ME3760 is designed to meet the reliability and maximum

data transfer speed of the M2M market requires tailored.

ME3960 is a LTE FDD module with standard M.2 form factor. It is

super thin and small bulk design, compatible with HSPA/WCDMA

and GSM. ME3960 supports LTE FDD B1/B2/B4/B5/B8/B17, UMTS

B1/B2/B5, GSM B2/B3/B5/B8 bands and GPS, it could be widely

used in video monitoring, power monitoring, consumer tablet,

environmental monitoring and many other M2M industry.

Product final delivery area mainly in Latin America and other

regions. The module has passed Intel’s PAD solution connected

matching test, and successfully entered the Intel recommended AVL

(Approved Vendor List).

Specification

Specification

Frequency Band

TDD-LTE: 1900(Band39)

/2300(Band40)/2600(Band38)MHz

FDD-LTE: 2600MHz

TD-SCDMA: HSPA 1900/2100MHz

Form Factor Mini PCIE 52Pin

Dimension 51×30×5.05mm

Data rate DL 100Mbps/UL 50Mbps

Temperature -20OC ~ +70OC

Power Supply 3.3V~4.2V/Typical Voltage3.6V

Features Data

Drivers Windows XP/Vista/7 ,Linux 2.6.20 and later, WinCE6.0

Certification RoHS, CCC in planning

Frequency Band

LTE FDD: B1,B2,B4,B5,B8,B17

UMTS: B1,B2,B5

GSM: B2,B3,B5,B8

Form Factor M.2(75Pin)

Dimension 42×30×2.25mm

Data rate DL 100Mbps/UL 50Mbps

TemperatureWorking Temperature: -20OCto 60OC

Storage Temperature: -40OC to 85OC

Power Supply 3.3V ± 5%

Features

Support data, SMS, etc.

Support TK, USSD, RAS, ECM

Support GPS, A-GPS

Support diversity reception

FOTA

Drivers Win7/8/WinCE /Linux/Android

Certification TBD

For more detailed specification, please visit: www.ztewelink.com/support/

Introduction about Openlink of ZTE modules

With the development of M2M networking and wireless

communications industries, more and more end products require data

transmission and remote control via a wireless connection. Wireless

communication module has been used in various industries and

scenarios. In order to reduce customer adaptation difficulty and shorten

the development cycle, ZTEWelink has developed Openlink function for

its module products, greatly reducing the customer‘s product design

cycle, reduce the customer total cost, and improve the product stability.

Openlink function is done through an open module of MCU resources,

to eliminate the external MCU and wiring of form a complete set

of storage and related work, thereby saving the customer BOM

cost. In this function, the operation of the AT command is adopt in

synchronous mode, programming is convenient and the code is

stable. Customer can realize related functions performed by reference

sample also it can speed up the product mass production. As a result

of IDE development environment and development methods, and the

use of MDK platform to provide customers with a unified interface,

convenient transplantation between GSM/CDMA platform, customer

just needs to change little so that the APP can run across products, and

for the customers, the platform is very familiar and easy to get started.

Openlink program can use the standard C library and other libraries.

It can be used freely and supports multiple tasks at the same time.

Costumers can define different task to make each more clearly, and also

various upper application interfaces are open so that it can meet

customers’ demand calls.

Openlink function is suitable for smart meters, car platform, GPS tracker,

fixed platform, business phone application scenarios and remote data

acquisition, data monitoring and other industrial applications.

For customers with Openlink functional requirements, ZTE Welink

provides hardware product supporting Openlink firmware, the upper

Openlink lib and the description of the detailed. H file, a variety of

common application example code and MDK engineering, merge and

download tools, pre-sale training, code review services and provide

technical support in the debugging process of the product.

Currently Openlink function has been completed on the 2G, yet 3G

module as it involves the transfer rate and more functional features, can

be customized according to customer's actual demand.

Note: the specific interface function definition and debugging details

can be communicated through FAE interface.

www.ztewelink.com/support