Woven 150 Spec Sheet

The Woven Geotextile is a non-biodegradable material designed for use in a wide range of soil

stabilization, drainage and erosion control applications. Offering a high resistance to mildew,

insects, and chemicals, this woven 150 geotextile meets the following minimum average roll

values:

Woven 150 Specification Sheet

150 lbs. Grab Tensile Woven Stabilization Geotextile Fabric

Property Test Method Minimum Average Roll Value

Weight 3 oz./sq.yd

Grab Tensile ASTM-D-4632 150 lbs. (w)

120 lbs. (f)

Grab Elongation ASTM-D-4632 20 % (w)

15% (f)

Mullen Burst ASTM-D-3786 300 psi

Puncture ASTM-D-4833 84 lbs

UV Resistance ASTM-D-4355 70 % at 2500 hr

Permittivity ASTM-D-4491 0.05 sec ¯¹

Flow Rate ASTM-D-4491 34 gal/min/sq.ft.

Unless otherwise noted, this certification is based on testing conducted at the time of manufacturing.