WORLDWIDE LOCATIONS

Sumitomo Machinery Corporation of AmericaHeadquarters & Manufacturing

4200 Holland BoulevardChesapeake, VA 23323Tel: 757-485-3355 • Fax: 757-485-7490

www.smcyclo.comE-mail: customercare@suminet.com

U.S. Sales and Support

Mid-WestSumitomo Machinery Corporation of America175 West Lake DriveGlendale Heights, IL 60139Tel: 630-752-0200 • Fax: 630-752-0208

WestSumitomo Machinery Corporation of America2375 Railroad StreetCorona, CA 92880-5411Tel: 951-340-4100 • Fax: 951-340-4108

SouthwestSumitomo Machinery Corporation of America1420 Halsey Way #130Carrollton, TX 75007Tel: 972-323-9600 • Fax: 972-323-9308

Canada

Toronto (East)SM-Cyclo of Canada, Ltd.1045 South Service Road, WestOakville, Onatio, Canada L6L 6K3Tel: 905-469-1050 • Fax: 905-469-1055

Vancouver (West)SM-Cyclo of Canada, Ltd.740 Chester Road, Annacis Island, DeltaB.C., Canada V3M 6J1Tel: 604-525-5403 • Fax: 604-525-0879

MontrealSM-Cyclo of Canada, Ltd.2862 Blvd. Daniel-JohnsonLaval, Quebec, Canada H7P 527Tel: 450-686-8808 • Fax: 450-686-8800

World Headquarters

JapanSumitomo Heavy Industries, Ltd.Power Transmission & Controls GroupThinkpark Tower, 1-1, Osaki 2-chome,Shinagawa-ku, Tokyo 141-6025 JapanTel: 011-813-6737-2511 • Fax: 011-813-6866-5160

For Worldwide contact information:www.sumitomodrive.com

Mexico

MonterreySM-Cyclo de Mexico, S.A. de C.V.Calle “C” No. 506AParque Industrial AmacentroApodaca, N.L., Mexico 66600Tel: 011-52-81-8144-5130 • Fax: 011-52-81-8369-3699

Mexico CitySM-Cyclo de Mexico, S.A. de C.V.Privada Ceylan No. 59-B BisColonia Industrial VallejoDelegacion Azcapotzalco, DF Mexico 02300Tel: 011-52-55-5368-7172 • Fax: 011-52-55-5368-6699

GuadalajaraSM-Cyclo de Mexico, S.A. de C.V.Unidad Privativa No. 4Alamo Tecno ParkTlaqepapue, JAL CP 44490Tel: 011-52-33-3675-43-69 • Fax: 011-52-33-3675-4418

South America

BrazilSM-Cyclo Redutores do Brasil Ltda.Av. Fagundes Filho, 191Ed. Houston Office Center-cj. H123CEP: 04304-010-Sao Paulo, BrazilTel: 011-55-11-5585-3600 • Fax: 011-55-11-5585-9990

ChileSM-Cyclo de Chile Ltda.San Pablo 3507Comuna de Quinta Normal - Santiago, ChileTel: 011-562-892-7000 • Fax: 011-562-892-7001

SM-Cyclo de Chile Ltda.Calle 8, Manzana N2, Sitio 1Sector La Negra, Antofagasta, ChileTel: 011-565-556-1611 • Fax: 011-565-556-1616

SM-Cyclo de Chile Ltda.Camino a Coronel Km 10, #5580, Modulo 3-AComuna: San Pedro de la Paz - Concepción, ChileTel: 011-41-246-98-06/07 • Fax: 011-41-246-98-08

ArgentinaSM-Cyclo de Argentina SAManuel Montes de Oca 6719B1606 BMG, MunroBuenos Aires, ArgentinaTel: 011-54-11-4765-5332 • Fax: 011-54-11-4765-5517

EuropeAustria

Belgium

France

Germany

Italy

Spain

Sweden

United Kingdom

AsiaChina

Hong Kong

Indonesia

Korea

Malaysia

Philippines

Singapore

Taiwan

Thailand

Vietnam

Other LocationsAustralia

India

New Zealand

Brochure 01.075.51.001©2009 Sumitomo Machinery Corporation of America Printed in USA

C P H

S

B S

CHLORINE CONTACT CHAMBER

FILTRATION

C P

C

C

CLARIFIERS

Center Drive

Sludge Scraper

Rim Drive

Over Flow Skimmer

H

C P

PRIMARY SETTLING BASINS

Clari�er

Conveyors

SLUDGE DEWATERING

Belt Filter Press

Screw Press

Sludge Handling Conveyors

C

PB

C P

C

H S

C

C

C

DAF THICKENER

Drag Chain

Surface Scraper

Over�ow Skimmer

C P

C P

SETTLING BASINS (BIOREACTOR)

Aerator

Paddlewheel Aerator

C

C

C P

C

C

P

H B S

DIGESTERS/FERMENTERS

Mixers

Agitators

Screw Conveyor

Drag Conveyors

Center Drive

Sludge Scraper

C

C

S

S

P

C

C

C

H

H

H

S

C

PRETREATMENT BUILDING

Screw Pump

Bar Screen

Grit Screen

Centrifuge

Drag Conveyors

Screw Press

Communitor

C P H B S

Secondary TreatmentSecondary Treatment

Sludge ProcessingSludge Processing

Final TreatmentFinal Treatment

Primary TreatmentPrimary Treatment

Preliminary Treatment(Headworks)Preliminary Treatment(Headworks)

P

H

B

S

Cyclo® - Inline

Paramax - Industrial Right Angle and Offset Parallel

Cyclo® Helical Buddybox - Offset Parallel

Cyclo® Bevel Buddybox - Right Angle

Helical Shaft Mount

Sumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatment equipment such as aerators, comminutors, clarifiers, screens and conveyors. Using our expertise as one of the world’s leading designers of gearing and speed reducers for wastewater processing, we’ve adapted our standard drive parts to suit the harsh conditions of each wastewater industry application. The result is a comprehensive range of Sumitomo Drive Technologies power trans-mission products tailored speci-fically for this industry.

Wastewater treatment facilities must operate 24 hours a day under severe conditions created by the constant flow of highly corrosive wastewater. Minimizing downtime is essential. Whatever your wastewater application, we understand the challenges you face, and we have reliable, durable solutions that deliver the lowest possible life cycle cost and the highest level of performance.

Power Transmission Products for all of your Wastewater Treatment Needs

“ Cyclo drives have given us the best performance of any of the gear drives

we’ve ever had in this plant. Not only have we noticed a 40% reduction in amp

draw over previous units, we find that our mixers are distributing wastewater

to all corners of the tank. This tells us that the Cyclo® Drives are using less

energy while supplying more torque than we used previously. Wastewater Treatment Facility

Hillsborough County, FL

“

“ Paramax® reducers were initially specified for this application for off-the-shelf

availability of internal parts. Little did we know that spare parts would not be

needed. The Paramax® units run cooler, quieter and more reliable than any

we’ve had in the past.

Wastewater Treatment Facility

Clearwater, FL

“

In most industrial and municipal wastewater treatment systems, the final

“product” produced by the treatment process requires dewatering - physical

separation of the solids fraction for final disposal, and the liquid fraction for

recycling to the beginning of the treatment process or for further treatment

processing.

DigestersAfter the solids are settled out of the clarifiers they are pumped to the digesters. The digesters “digest” the solids - thus removing vector attracting volatiles and making the solids (aka sludge) suitable for land application.

Agitators/Center Drives/Scraper- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Sludge DewateringFilter presses are found in many different industries and not restricted or limited to the dewatering of biosolids. This application can be found in wastewater treatment facilities to remove the final solids of the treatment process. Other applications in the final stage include screen presses, sludge handling conveyors, and other dewatering systems.

Screw/Belt Filter Press- Cyclo- Paramax

- Cyclo Helical Buddybox (HBB)- Helical Shaft Mount (HSM)

Sludge ProcessingSludge Processing

C P H

S

B S

CHLORINE CONTACT CHAMBER

FILTRATION

C P

C

C

CLARIFIERS

Center Drive

Sludge Scraper

Rim Drive

Over Flow Skimmer

H

C P

PRIMARY SETTLING BASINS

Clari�er

Conveyors

SLUDGE DEWATERING

Belt Filter Press

Screw Press

Sludge Handling Conveyors

C

PB

C P

C

H S

C

C

C

DAF THICKENER

Drag Chain

Surface Scraper

Over�ow Skimmer

C P

C P

SETTLING BASINS (BIOREACTOR)

Aerator

Paddlewheel Aerator

C

C

C P

C

C

P

H B S

DIGESTERS/FERMENTERS

Mixers

Agitators

Screw Conveyor

Drag Conveyors

Center Drive

Sludge Scraper

C

C

S

S

P

C

C

C

H

H

H

S

C

PRETREATMENT BUILDING

Screw Pump

Bar Screen

Grit Screen

Centrifuge

Drag Conveyors

Screw Press

Communitor

C P H B S

Secondary TreatmentSecondary Treatment

Sludge ProcessingSludge Processing

Final TreatmentFinal Treatment

Primary TreatmentPrimary Treatment

Preliminary Treatment(Headworks)Preliminary Treatment(Headworks)

P

H

B

S

Cyclo® - Inline

Paramax - Industrial Right Angle and Offset Parallel

Cyclo® Helical Buddybox - Offset Parallel

Cyclo® Bevel Buddybox - Right Angle

Helical Shaft Mount

Sumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatment equipment such as aerators, comminutors, clarifiers, screens and conveyors. Using our expertise as one of the world’s leading designers of gearing and speed reducers for wastewater processing, we’ve adapted our standard drive parts to suit the harsh conditions of each wastewater industry application. The result is a comprehensive range of Sumitomo Drive Technologies power trans-mission products tailored speci-fically for this industry.

Wastewater treatment facilities must operate 24 hours a day under severe conditions created by the constant flow of highly corrosive wastewater. Minimizing downtime is essential. Whatever your wastewater application, we understand the challenges you face, and we have reliable, durable solutions that deliver the lowest possible life cycle cost and the highest level of performance.

Power Transmission Products for all of your Wastewater Treatment Needs

“ Cyclo drives have given us the best performance of any of the gear drives

we’ve ever had in this plant. Not only have we noticed a 40% reduction in amp

draw over previous units, we find that our mixers are distributing wastewater

to all corners of the tank. This tells us that the Cyclo® Drives are using less

energy while supplying more torque than we used previously. Wastewater Treatment Facility

Hillsborough County, FL

“

“ Paramax® reducers were initially specified for this application for off-the-shelf

availability of internal parts. Little did we know that spare parts would not be

needed. The Paramax® units run cooler, quieter and more reliable than any

we’ve had in the past.

Wastewater Treatment Facility

Clearwater, FL

“

Power Transmission Products for all of yourWastewater Treatment NeedsSumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatmentequipment such as aerators, communitors, clarifiers, screens and conveyors.

With the knowledge and expertise gained as one of the worlds leading designers of gearing and speed reducers for use inprocessing wastewater, Sumitomo Drive Technologies was able to develop a range of industry specific power transmissionproducts using our standard drive parts that are adaptxed to suit the arduous and demanding duty conditions of each application within the wastewater industry.

Solid TransportationIn the headworks process, Sumitomo gear drives help trans-port water and solids throughout the wastewater plant. Some applications that are used are screw pumps, various types of conveyors including drag and screw, etc. Sumitomo gearboxes help transport the materials efficiently, regard-less of the size.

Screw Pump- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)

- Helical Shaft Mount (HSM)

The secondary clarifiers are another set of tanks where the bacteria from the

activated sludge tanks are settled out by gravity. The secondary clarifiers

provide a quiescent condition that promotes settling of the bacterial growth

from the trickling filters and also any solids or scum not removed during

primary sedimentation. The collected sludge and scum is pumped back to the

headworks to repeat the treatment process.

AeratorTo achieve adequate aeration, many biochemical processes use aerator applications to pump air into the bottom of the reactor. This method tends to rely on a gear drive to pump air into the water. In wastewater treatment applications, the reactor media is very viscious due to the heavy sludge of organic matter. Sumitomo’s gearboxes are ideal for these types of applications.

Settling Basins/Bioreactor- Cyclo- Paramax

ClarifiersThe secondary clarifiers are another set of circular tanks where the bacteria from the activated sludge tanks are settled out by gravity. They provide a quiescent condition that promotes settling of the bacterial growth from the trickling filters and also any solids or scum not removed during primary sedimentation.

Center Drives/Scraper/Rim Drives/Skimmer- Cyclo- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Secondary TreatmentSecondary Treatment

In the headworks process, Sumitomo power transmission products help

transport water and solids throughout this wastewater process. Sumitomo

equipment is used in screw pumps, automatic screen cleaners and drag and

screw conveyors. Regardless of the size, Sumitomo gearboxes help transport

materials efficiently.

Influent PumpingScrew Pumps are an efficient means of lifting large quantities of water or wastewater at low heads. Recognized for efficiency, Sumitomo’s gear drives typically result in lower electricity costs over the lifespan of this type of equipment.

Screw Pump- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)- Helical Shaft Mount (HSM)

Bar ScreeningAs wastewater enters the plant, it passes through narrow openings, called bar screens or bar racks. They remove objects in the wastewater that are large enough to be caught, and could plug lines or block tank inlets. There are different types of screens that may be used, trash racks, manually cleaned racks, and mechanically cleaned racks.Bar Screen- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Preliminary (Headworks)Preliminary (Headworks)

The next stages are the removal of the suspended solid matter from the waste

water. The flow passes to large circular or rectangular tanks called primary

settlement tanks, and the waste water is retained allowing the solid particles to

settle to the bottom where they accumulate as sludge. The effluent leaves the

tanks over outlet weirs and then passes on to the secondary treatment stage.

The settled sludge is withdrawn from the tank and passed for further treatment

prior to disposal or recycling.

Primary TreatmentPrimary Treatment

Grit Collector/ClassifierThe primary treatment stage consists of a simple separation between sandy or solid fines and the remaining effluent, which then undergoes secondary treatment. Many grit collector applications utilize Sumitomo gear drives.

Sludge Handling- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)

Primary Settling BasinsGravity is primarily used to allow solids to settle on the bottom of the tank. Up to 70% of solids can be collected. This organic matter or sludge is typically removed by scraping the bottom of the tank without disturbing operation. Some biological action also takes place and breaks down complex solids into more simple compounds. Fat and grease may rise to the surface. This scum is removed without disturbing the settling process. Aerator

- Cyclo- Paramax

In the headworks process, Sumitomo power transmission products help

transport water and solids throughout this wastewater process. Sumitomo

equipment is used in screw pumps, automatic screen cleaners and drag and

screw conveyors. Regardless of the size, Sumitomo gearboxes help transport

materials efficiently.

Influent PumpingScrew Pumps are an efficient means of lifting large quantities of water or wastewater at low heads. Recognized for efficiency, Sumitomo’s gear drives typically result in lower electricity costs over the lifespan of this type of equipment.

Screw Pump- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)- Helical Shaft Mount (HSM)

Bar ScreeningAs wastewater enters the plant, it passes through narrow openings, called bar screens or bar racks. They remove objects in the wastewater that are large enough to be caught, and could plug lines or block tank inlets. There are different types of screens that may be used, trash racks, manually cleaned racks, and mechanically cleaned racks.Bar Screen- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Preliminary (Headworks)Preliminary (Headworks)

The next stages are the removal of the suspended solid matter from the waste

water. The flow passes to large circular or rectangular tanks called primary

settlement tanks, and the waste water is retained allowing the solid particles to

settle to the bottom where they accumulate as sludge. The effluent leaves the

tanks over outlet weirs and then passes on to the secondary treatment stage.

The settled sludge is withdrawn from the tank and passed for further treatment

prior to disposal or recycling.

Primary TreatmentPrimary Treatment

Grit Collector/ClassifierThe primary treatment stage consists of a simple separation between sandy or solid fines and the remaining effluent, which then undergoes secondary treatment. Many grit collector applications utilize Sumitomo gear drives.

Sludge Handling- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)

Primary Settling BasinsGravity is primarily used to allow solids to settle on the bottom of the tank. Up to 70% of solids can be collected. This organic matter or sludge is typically removed by scraping the bottom of the tank without disturbing operation. Some biological action also takes place and breaks down complex solids into more simple compounds. Fat and grease may rise to the surface. This scum is removed without disturbing the settling process. Aerator

- Cyclo- Paramax

C P H

S

B S

CHLORINE CONTACT CHAMBER

FILTRATION

C P

C

C

CLARIFIERS

Center Drive

Sludge Scraper

Rim Drive

Over Flow Skimmer

H

C P

PRIMARY SETTLING BASINS

Clari�er

Conveyors

SLUDGE DEWATERING

Belt Filter Press

Screw Press

Sludge Handling Conveyors

C

PB

C P

C

H S

C

C

C

DAF THICKENER

Drag Chain

Surface Scraper

Over�ow Skimmer

C P

C P

SETTLING BASINS (BIOREACTOR)

Aerator

Paddlewheel Aerator

C

C

C P

C

C

P

H B S

DIGESTERS/FERMENTERS

Mixers

Agitators

Screw Conveyor

Drag Conveyors

Center Drive

Sludge Scraper

C

C

S

S

P

C

C

C

H

H

H

S

C

PRETREATMENT BUILDING

Screw Pump

Bar Screen

Grit Screen

Centrifuge

Drag Conveyors

Screw Press

Communitor

C P H B S

Secondary TreatmentSecondary Treatment

Sludge ProcessingSludge Processing

Final TreatmentFinal Treatment

Primary TreatmentPrimary Treatment

Preliminary Treatment(Headworks)Preliminary Treatment(Headworks)

P

H

B

S

Cyclo® - Inline

Paramax - Industrial Right Angle and Offset Parallel

Cyclo® Helical Buddybox - Offset Parallel

Cyclo® Bevel Buddybox - Right Angle

Helical Shaft Mount

Sumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatment equipment such as aerators, comminutors, clarifiers, screens and conveyors. Using our expertise as one of the world’s leading designers of gearing and speed reducers for wastewater processing, we’ve adapted our standard drive parts to suit the harsh conditions of each wastewater industry application. The result is a comprehensive range of Sumitomo Drive Technologies power trans-mission products tailored speci-fically for this industry.

Wastewater treatment facilities must operate 24 hours a day under severe conditions created by the constant flow of highly corrosive wastewater. Minimizing downtime is essential. Whatever your wastewater application, we understand the challenges you face, and we have reliable, durable solutions that deliver the lowest possible life cycle cost and the highest level of performance.

Power Transmission Products for all of your Wastewater Treatment Needs

“ Cyclo drives have given us the best performance of any of the gear drives

we’ve ever had in this plant. Not only have we noticed a 40% reduction in amp

draw over previous units, we find that our mixers are distributing wastewater

to all corners of the tank. This tells us that the Cyclo® Drives are using less

energy while supplying more torque than we used previously. Wastewater Treatment Facility

Hillsborough County, FL

“

“ Paramax® reducers were initially specified for this application for off-the-shelf

availability of internal parts. Little did we know that spare parts would not be

needed. The Paramax® units run cooler, quieter and more reliable than any

we’ve had in the past.

Wastewater Treatment Facility

Clearwater, FL

“

Power Transmission Products for all of yourWastewater Treatment NeedsSumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatmentequipment such as aerators, communitors, clarifiers, screens and conveyors.

With the knowledge and expertise gained as one of the worlds leading designers of gearing and speed reducers for use inprocessing wastewater, Sumitomo Drive Technologies was able to develop a range of industry specific power transmissionproducts using our standard drive parts that are adaptxed to suit the arduous and demanding duty conditions of each application within the wastewater industry.

Solid TransportationIn the headworks process, Sumitomo gear drives help trans-port water and solids throughout the wastewater plant. Some applications that are used are screw pumps, various types of conveyors including drag and screw, etc. Sumitomo gearboxes help transport the materials efficiently, regard-less of the size.

Screw Pump- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)

- Helical Shaft Mount (HSM)

The secondary clarifiers are another set of tanks where the bacteria from the

activated sludge tanks are settled out by gravity. The secondary clarifiers

provide a quiescent condition that promotes settling of the bacterial growth

from the trickling filters and also any solids or scum not removed during

primary sedimentation. The collected sludge and scum is pumped back to the

headworks to repeat the treatment process.

AeratorTo achieve adequate aeration, many biochemical processes use aerator applications to pump air into the bottom of the reactor. This method tends to rely on a gear drive to pump air into the water. In wastewater treatment applications, the reactor media is very viscious due to the heavy sludge of organic matter. Sumitomo’s gearboxes are ideal for these types of applications.

Settling Basins/Bioreactor- Cyclo- Paramax

ClarifiersThe secondary clarifiers are another set of circular tanks where the bacteria from the activated sludge tanks are settled out by gravity. They provide a quiescent condition that promotes settling of the bacterial growth from the trickling filters and also any solids or scum not removed during primary sedimentation.

Center Drives/Scraper/Rim Drives/Skimmer- Cyclo- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Secondary TreatmentSecondary Treatment

C P H

S

B S

CHLORINE CONTACT CHAMBER

FILTRATION

C P

C

C

CLARIFIERS

Center Drive

Sludge Scraper

Rim Drive

Over Flow Skimmer

H

C P

PRIMARY SETTLING BASINS

Clari�er

Conveyors

SLUDGE DEWATERING

Belt Filter Press

Screw Press

Sludge Handling Conveyors

C

PB

C P

C

H S

C

C

C

DAF THICKENER

Drag Chain

Surface Scraper

Over�ow Skimmer

C P

C P

SETTLING BASINS (BIOREACTOR)

Aerator

Paddlewheel Aerator

C

C

C P

C

C

P

H B S

DIGESTERS/FERMENTERS

Mixers

Agitators

Screw Conveyor

Drag Conveyors

Center Drive

Sludge Scraper

C

C

S

S

P

C

C

C

H

H

H

S

C

PRETREATMENT BUILDING

Screw Pump

Bar Screen

Grit Screen

Centrifuge

Drag Conveyors

Screw Press

Communitor

C P H B S

Secondary TreatmentSecondary Treatment

Sludge ProcessingSludge Processing

Final TreatmentFinal Treatment

Primary TreatmentPrimary Treatment

Preliminary Treatment(Headworks)Preliminary Treatment(Headworks)

P

H

B

S

Cyclo® - Inline

Paramax - Industrial Right Angle and Offset Parallel

Cyclo® Helical Buddybox - Offset Parallel

Cyclo® Bevel Buddybox - Right Angle

Helical Shaft Mount

Sumitomo Drive Technologies manufactures a wide variety of enclosed gearing designed to drive wastewater treatment equipment such as aerators, comminutors, clarifiers, screens and conveyors. Using our expertise as one of the world’s leading designers of gearing and speed reducers for wastewater processing, we’ve adapted our standard drive parts to suit the harsh conditions of each wastewater industry application. The result is a comprehensive range of Sumitomo Drive Technologies power trans-mission products tailored speci-fically for this industry.

Wastewater treatment facilities must operate 24 hours a day under severe conditions created by the constant flow of highly corrosive wastewater. Minimizing downtime is essential. Whatever your wastewater application, we understand the challenges you face, and we have reliable, durable solutions that deliver the lowest possible life cycle cost and the highest level of performance.

Power Transmission Products for all of your Wastewater Treatment Needs

“ Cyclo drives have given us the best performance of any of the gear drives

we’ve ever had in this plant. Not only have we noticed a 40% reduction in amp

draw over previous units, we find that our mixers are distributing wastewater

to all corners of the tank. This tells us that the Cyclo® Drives are using less

energy while supplying more torque than we used previously. Wastewater Treatment Facility

Hillsborough County, FL

“

“ Paramax® reducers were initially specified for this application for off-the-shelf

availability of internal parts. Little did we know that spare parts would not be

needed. The Paramax® units run cooler, quieter and more reliable than any

we’ve had in the past.

Wastewater Treatment Facility

Clearwater, FL

“

In most industrial and municipal wastewater treatment systems, the final

“product” produced by the treatment process requires dewatering - physical

separation of the solids fraction for final disposal, and the liquid fraction for

recycling to the beginning of the treatment process or for further treatment

processing.

DigestersAfter the solids are settled out of the clarifiers they are pumped to the digesters. The digesters “digest” the solids - thus removing vector attracting volatiles and making the solids (aka sludge) suitable for land application.

Agitators/Center Drives/Scraper- Cyclo- Paramax- Cyclo Helical Buddybox (HBB)- Cyclo Bevel Buddybox (BBB)- Helical Shaft Mount (HSM)

Sludge DewateringFilter presses are found in many different industries and not restricted or limited to the dewatering of biosolids. This application can be found in wastewater treatment facilities to remove the final solids of the treatment process. Other applications in the final stage include screen presses, sludge handling conveyors, and other dewatering systems.

Screw/Belt Filter Press- Cyclo- Paramax

- Cyclo Helical Buddybox (HBB)- Helical Shaft Mount (HSM)

Sludge ProcessingSludge Processing

WORLDWIDE LOCATIONS

Sumitomo Machinery Corporation of AmericaHeadquarters & Manufacturing

4200 Holland BoulevardChesapeake, VA 23323Tel: 757-485-3355 • Fax: 757-485-7490

www.smcyclo.comE-mail: customercare@suminet.com

U.S. Sales and Support

Mid-WestSumitomo Machinery Corporation of America175 West Lake DriveGlendale Heights, IL 60139Tel: 630-752-0200 • Fax: 630-752-0208

WestSumitomo Machinery Corporation of America2375 Railroad StreetCorona, CA 92880-5411Tel: 951-340-4100 • Fax: 951-340-4108

SouthwestSumitomo Machinery Corporation of America1420 Halsey Way #130Carrollton, TX 75007Tel: 972-323-9600 • Fax: 972-323-9308

Canada

Toronto (East)SM-Cyclo of Canada, Ltd.1045 South Service Road, WestOakville, Onatio, Canada L6L 6K3Tel: 905-469-1050 • Fax: 905-469-1055

Vancouver (West)SM-Cyclo of Canada, Ltd.740 Chester Road, Annacis Island, DeltaB.C., Canada V3M 6J1Tel: 604-525-5403 • Fax: 604-525-0879

MontrealSM-Cyclo of Canada, Ltd.2862 Blvd. Daniel-JohnsonLaval, Quebec, Canada H7P 527Tel: 450-686-8808 • Fax: 450-686-8800

World Headquarters

JapanSumitomo Heavy Industries, Ltd.Power Transmission & Controls GroupThinkpark Tower, 1-1, Osaki 2-chome,Shinagawa-ku, Tokyo 141-6025 JapanTel: 011-813-6737-2511 • Fax: 011-813-6866-5160

For Worldwide contact information:www.sumitomodrive.com

Mexico

MonterreySM-Cyclo de Mexico, S.A. de C.V.Calle “C” No. 506AParque Industrial AmacentroApodaca, N.L., Mexico 66600Tel: 011-52-81-8144-5130 • Fax: 011-52-81-8369-3699

Mexico CitySM-Cyclo de Mexico, S.A. de C.V.Privada Ceylan No. 59-B BisColonia Industrial VallejoDelegacion Azcapotzalco, DF Mexico 02300Tel: 011-52-55-5368-7172 • Fax: 011-52-55-5368-6699

GuadalajaraSM-Cyclo de Mexico, S.A. de C.V.Unidad Privativa No. 4Alamo Tecno ParkTlaqepapue, JAL CP 44490Tel: 011-52-33-3675-43-69 • Fax: 011-52-33-3675-4418

South America

BrazilSM-Cyclo Redutores do Brasil Ltda.Av. Fagundes Filho, 191Ed. Houston Office Center-cj. H123CEP: 04304-010-Sao Paulo, BrazilTel: 011-55-11-5585-3600 • Fax: 011-55-11-5585-9990

ChileSM-Cyclo de Chile Ltda.San Pablo 3507Comuna de Quinta Normal - Santiago, ChileTel: 011-562-892-7000 • Fax: 011-562-892-7001

SM-Cyclo de Chile Ltda.Calle 8, Manzana N2, Sitio 1Sector La Negra, Antofagasta, ChileTel: 011-565-556-1611 • Fax: 011-565-556-1616

SM-Cyclo de Chile Ltda.Camino a Coronel Km 10, #5580, Modulo 3-AComuna: San Pedro de la Paz - Concepción, ChileTel: 011-41-246-98-06/07 • Fax: 011-41-246-98-08

ArgentinaSM-Cyclo de Argentina SAManuel Montes de Oca 6719B1606 BMG, MunroBuenos Aires, ArgentinaTel: 011-54-11-4765-5332 • Fax: 011-54-11-4765-5517

EuropeAustria

Belgium

France

Germany

Italy

Spain

Sweden

United Kingdom

AsiaChina

Hong Kong

Indonesia

Korea

Malaysia

Philippines

Singapore

Taiwan

Thailand

Vietnam

Other LocationsAustralia

India

New Zealand

Brochure 01.075.51.001©2009 Sumitomo Machinery Corporation of America Printed in USA