Crankshaft whirling machineWork piece length up to 4.500 mm

page 1 of 5

- Engine power of whirling unit: 100 kW

- SIEMENS 840 D – 9 Axis

- Automatic compensation of the work piece bending

Crankshaft whirling machineWork piece length up to 4.500 mm

-Full housing of the machine

with integrated service room

and switch cabinet

- Central swarf removalpage 1 of 5

Crankshaft whirling machineWork piece length up to 4.500 mm

main machine dimensions and weight (w/o switch cabinet)length incl. Chip conveyer ca. 10.000 mm

width ca. 4.000 mm

height ca. 4.000 mm

weight ca. 40.000 kgMax. work piece length 4.500 mm

Dimension switch cabinet

Length ca. 3000 mm

Width ca. 600 mm

Height ca. 2200 mmWeight ca. 2000 kg

page 3 of 5

Product range:

The whirling machine KWM 700 - 5000 is capable for

rough machining with following tolerances:

Surface quality 12,5 �mconcentricity 2,5 mm

Tolerance in length according to DIN 7168-m

Input power of the whirling unit is 100 KW for machining

crankshafts with a work piece length of up to 4.500 mm and a max. surrounding diameter of 520 mm.

Crankshaft whirling machineWork piece length up to 4.500 mm

page 4 of 5

The crankshaft is been hold on position by the

steady system of AEROBOTECH

Crankshaft whirling machineWork piece length up to 4.500 mm

page 5 of 5

Starting with a forged crankshaft, which is just

pre machined at the ends for adapting in the

chucks.

Some proud Burgsmüller engineers after

machining one crankshaft bottom to bottom