WATER TREATMENT TECHNOLOGIES & EQUIPMENT

Available from:

FILQUIP Pty Limited 5/126 Compton Rd, Underwood, Qld 4119 Australia Ph: +61 7 3208 3499 Fx: +61 7 3208 3449 Email: sales@filquip.com.au www.filquip.com.au

WAMGROUP® offers state-of-the-art solutions through a compre-hensive product range of machines and equipment for effluent pre-treatment and sludge treatment in both municipal and industrial waste water purification plants.

WAMGROUP® develops innovative market-oriented, industrially manufactured products distributed through its own global network.

WAMGROUP® is determined to supply the most comprehensive range of equipment available to deliver the one-stop-solution to its cus-tomers.

WAMGROUP® offers customers in any place in the world the highest possible quality product and service at a fair price.

Available from:

FILQUIP Pty Limited

5/126 Compton Rd Underwood Qld 4119

Australia Phone: +61 7 3208 3499

Fax: +61 7 3208 3449 Email: sales@filquip.com.au

www.filquip.com.au

1

WAT

ER L

IFTI

NG

1

Archimedean Screw Pumps PA

Since the late 1970s more than 1,200 Archimedean Water Screw Pumps ranging from 0.5 to 4 metres (1.6 to 13 ft) in diameter and flow rates of up to 4,500 litres per second (160 cu ft per sec) have been successfully operating.

- Single, double or triple flight - Drive power installed up to 500 kW (680 HP)

and more- Constant efficiency over time

ARCHIMEdEAN WATER SCREW PUMPS

2

SCR

EEN

ING

2

MULTIRAkES

Sub-vertical Mechanical Fine Bar Screens GVFGVF Sub-vertical Mechanical Bar Screens are used for medium-fine screening in both municipal and industrial waste water treatment plants.

- 6 ~ 10 mm spacing - 4 or more cleaning rakes depending on screen height- Channel width: 400 ~ 2,000 mm - 75-90 degree incline angle

Sub-vertical Mechanical Perforated Screens GVSGVS Sub-vertical Mechanical Bar Screens are used for fine screening in both municipal and industrial waste water plants. In particular, they are applied forscreening process water in industrial processing plants.

- 3 ~ 6 mm perforation - 4 or more cleaning blades and wipers depending on

screen height - Channel width: 400 ~ 2,000 mm - 75-90 degree incline angle

Sub-vertical Mechanical Bar Screens GVBGVB Sub-vertical Mechanical Bar Screens are used for coarse screening in both municipal and industrial waste water plants.

- 10 ~ 50 mm spacing - 2 or more cleaning rakes ensuring quick, efficient solids

removal - Channel width: 400 ~ 2,000 mm - 75-90 degree incline angle

3

scr

een

ing

3

WASTEMASTER® GCPC-GCEC In-Tank Screw ScreensInstalled in a self-supporting tank, GCPC / GCEC-type Screw Screens can be easily installed and connected to the pipework in both civil and industrial effluent treatment plants.

- Sturdy metal framework (completely enclosed structure in compliance with safety regulations and preventing odours) manufactured entirely from 304L/316L stainless steel

- Throughput up to 1,000 m3/h- Solids extraction capacity up to 0.33 dm3/h- Solids volume reduction up to 35%

SCREW SCREENS

WASTEMASTER® GCP-GCE Screw ScreensGCP and GCE-type Screw Screens ensure efficient solids-liquid separation in the primary treatment section of civil waste water treatment plants, as well as in various industrial applications.

- Flow rates of up to 1,000 m3/h (590 cfm)- Solids extraction of up to 0.33 dm3/s- Solids volume reduction of up to 35%

4

SCR

EEN

ING

4

WASTEMASTER® GCV Vertical Screw Screens

GCV Vertical Screw Screens enable efficient removalof suspended solids in installations with little spaceavailable. Moreover, the GCV is the ideal protectionsystem for pumping stations with submersible pumps.

- Throughput rates of up to 320 m3/h (188 cfm)- Solids extraction of up to 0.35 dm3/s- Solids volume reduction of up to 40%

WASTEMASTER® GCEV In-Channel VerticalScrew ScreensGCEV Vertical Screw Screens enable efficient removal ofsuspended solids from deep channels,

- Capacity up to 180 m3/h- Fabricated parts and screws manufactured from

304L/316L stainless steel or high-strength steel- Variable degree of screening (2, 3, 5, 6, or 10mm)

WASTEMASTER® CT-CTC Mini-Screw ScreensIts lightweight design makes the CT Mini-Screw Screen the ideal choice for applications with low flow rates.

- Lightweight design (less than 40 kg) - Anti-wear SINTTM engineering polymer screw for high

extraction efficiency- Screens with 2 or 5 mm mesh size

Overflow Spillways VSEVSE Overflow Spillways are used to treat overflows. They consist of a semicircular filter installed on the edge of the spillway.

- 3 sizes available (300 / 500 / 700 mm) - 2 opening sizes available

(6 / 8 mm perforated plate) - Lengths from 1 to 12 m

WASTEMASTER® TSF 1 Mechanical Effluent Pre-treatment PlantsThe TSF1 Compact Plant combines separation of solidspresent in effluents with compacting and de-watering ofthe solids extracted. The special design of the machinecombined with a specific functional control results in acomplete mechanical pre-treatment of waste water forsmall treatment plants.

- Flow rates of up to 500 m3/h (300 cfm) - Solids extraction of up to 0.18 dm3/s (0.38 cfm) - Solids volume reduction of up to 40%

5

scr

een

ing

5

Fine Belt Screens VFR

Step Screens VTR

VFR Fine Belt Screens are used for fine screening in both municipal and industrial waste water treatment plants.

- 6 sizes up to 2,000 mm wide- 65 degree incline angle - Perforated media openings from 2 to 6 mm- Chain drive recessed into side rails - Double cleaning system

VTR Step Screens are another option for fine screening in municipal and industrial waste water treatment plants.

- Different sizes up to 1,800 mm wide - Discharge height from 1,400 to 3,500 mm - 3 and 6 mm spacing - 55-degree incline angle

PERfORATEd BELT SCREENS / STEP SCREENS

6

SCR

EEN

ING

6

WASTEMASTER® FTR Rotary Drum ScreensFTR is a Rotating Drum Screen designed to combine separation of solids present in effluents with compacting and de-watering of the screenings.

- Capacity up to 1,550 l/s- Variable degree of screening with either round punch

hole or wedge wire screen- Solids removal capacity up to 15 m3/h

Internally Fed Rotating Drum Screens RTVRTV Internally Fed Rotating Drum Screens are suitable for pre-treatment of both municipal and industrial waste water treatment, as well as MBR plants.

- 9 different sizes available - Standard perforated media spacing: 1 ~ 6 mm or

0.5 – 6.0 mm wedge wire or 0.25 - 1 mm square mesh- Recommended spacing for MBR application:

1 ~ 3 mm

Externally Fed Drum Screens SGRSGR Externally Fed Drum Screens are used for fine screening of sewage in civil waste water plants or for process water from industrial processing plants.

- Slot width: 0.25 ~ 2.5 mm - Wedge wire filter with so-called “slot zero” to ensure

drum resistance- Screen in 304 L / 316 L stainless steel

SPIRAMATIC VSA Fine Drum Screens SPIRAMATIC VSA Fine Drum Screens screen, wash, convey, and dewater screenings all in one unit, thus eliminating the need for multiple pieces of equipment. They are used in both municipal and industrial applications, as well as for the pre-treatment in MBR plants.

- Filter mesh sizes for MBR pre-treatment: 1.0 – 1.5 – 2.0 – 3.0 mm round punch holes

- Filter mesh sizes (other than MBR use): 5.0 – 6.0 mm round holes or 0.5 – 6.0 mm wedge wire

0.25 - 1 mm square mesh- Channel width: 600 ~ 3,000 mm - 35-degree incline angle- In-tank installation

dRUM SCREENS

7

PRET

REA

TMEN

T

7

COMPACTORS

WASTECOM® CPS Screw Compactors

Shafted Washer Compactors VWP

The CPS is a de-watering Screw Compactor for screened solids in civil and industrial waste water treatment plants.

- Trough liner manufactured from high-density, low-friction HDPE polymer

- Shaftless screw without end bearing - Outlet diaphragm ensuring high compaction efficiency

VWP Shafted Washer Compactors are used to compact screenings removing, at the same time, organic particles in both municipal and industrial waste water treatment plants.

- 3 sizes available - From 1.5 up to 6 m³/h of screenings - Washing system for removal of organic matter - Dry solids content up to 45%

8

PRET

REA

TMEN

T

8

Shafted Intensive Washer Compactors VWP WMVWP WM Shafted Washer Compactors are used to remove organic particles through a special washing system, at the same time compacting the solids.

- 3 sizes available - From 1.5 up to 6 m³/h of screenings - High performance washing system with special

hopper and impeller - Volume reduction up to 70%

Hydraulic Compactors CHPCHP Compactors are used to compact screenings by means of a hydraulic ram.

- 3 sizes available - Screenings throughput from 1.5 up to

3.5 m³/h- Volume reduction of up to 60%

9

PRET

REA

TMEN

T

9

GRIT TREATMENT EQUIPMENT

GRITSEP® FGC Fluid Dynamic Grit ClassifiersGRITSEP® FGC is an innovative sand and Grit Classifier designed to achieve the highest sand removal rate available on the market today.

- Sand separation with particle size ≥ 200 μm and specific gravity ranging from 2.60 to 2.65 t/m3

- Low drive power installed - Small footprint

GRITSEP® DSF Areated Grit ChambersGRITSEP® DSF combines a typical aerated grit chamber including sedimentation and fat removal with a built-in grit classifier.

- Flow rates of up to 210 litres per second (445 cfm)- Sand separation: 95% particle size ≥ 200 μm- Grease removal

Travelling Bridges for Grease and Grit Removal PVDPVD Travelling Bridges are used to remove grease and grit from effluent in municipal and industrial waste water treatment plants.

- Quick installation - High efficiency grit and grease removal - Easy installation even in existing tanks

Circular Grit Traps DSPDSP Grit Traps are designed to remove grit from sewage in waste water treatment plants.

- Available for up to 6-metre diameter tanks - Central bearing - Carbon steel hot dip-galvanised or

304 L / 316 L stainless steel

10

PRET

REA

TMEN

T

10

Sand Washer Classifiers CLSWCLSW Sand Washers are used to separate sand from water and to wash the grit at the same time in order to remove organic particles.

- 3 sizes available - Flow rates of up to 30 litres per second - High washing performance with organic

residue < 3%

GRITSEP® LCS Grit WashersGRITSEP® LCS is a Grit Washer with high performances obtained thanks to SINT™ engineering polymer components with excellent anti-wear features.

- Solid troughput: from 0.10 m3/h up to 0.40 m3/h- High washing performance with organic residue < 2%- Minimum footprint

GRITSEP® DS Grit ClassifiersThe GRITSEP® DS Grit Cassifier ensures efficient separation of grit or sand from waste water through decantation and removal by means of a conveyor screw.

- Liquid throughput: 5 ~ 36 m3/h (3 ~ 21 cfm)

- Solids throughput: 0.2 ~ 1.3 dm3/s (0.4 ~ 2.7 cfm)

- 90% sand sedimentation

Flow Slowing Device

Water Discharge Valve

11

PRET

REA

TMEN

T

11

COMPACT PLANTS

WASTEMASTER® MIT Waste Water Mini-Treatment PlantsThe MIT Mini-Treatment Plant carries out up to three different processes with the smallest ever overall dimensions: Screening, De-gritting and De-greasing.

- 90% separation of grain size ≥ 0.2 mm - Variable screening (2 and 5mm)- Floating screw for removal of floating matter

WASTEMASTER® TSF 2-3 Compact Plants for Mechanical Effluent Pre-treatment

The TSF2 and TSF3 Compact Pre-treatment Plants efficiently combine between two, respectively three functions of pre-treatment of sewage from civil or industrial installations.

- Flow rates of up to 210 litres per second (445 cfm) - Sand separation with:

95% particle size ≥ 200 μm - Grease removal with TSF3 - Up to 35% solids volume reduction

12

PRET

REA

TMEN

T

12

SEPTAGE RECEIvING STATIONS

Septage Receiving Stations VFA DM “THE BEAST”

VFA DM “THE BEAST” Septage Receiving Stations are also used for FOG and digester/sludge cleaning. The station screens, washes, conveys, and dewaters screenings all in one unit, thus eliminating the need for multiple pieces of equipment.

- 3 sizes available - Max. flow rate up to 200 m3/h at 4% solids concentration- Dual motor drive system - Drum screen round punch holes 5.0 – 6.0 mm wide - Drum screen incline angle: 25 degrees

13

PRET

REA

TMEN

T

13

WASTEMASTER® TSB 2-3 Septage Receiving StationsThe TSB2 and TSB3 Septage Receiving Stations carry out up to two, respectively three different processes: de-watering and compacting of screened solid waste, separation of sand and - TSB3 only - removal of floating greasy matter.

- Flow rates of up to 30 litres per second (63.5 cfm) - Inlet screen mesh: 5, 6, 7 mm

WASTEMASTER® TSB 1 Septage Receiving StationsFor pre-treatment of septage from cesspool tanks or industrial plants collected by special purge tankers, the TSB1 carries out two different processes: separation of solids present in the septage, as well as de-watering and compacting of the extracted solids.

- Sturdy metal framework (completely enclosed structure in compliance with safety regulations and preventing odours) manufactured entirely from 304L/316L stainless steel

- Shaftless conveyor screw manufactured from 304L/316L stainless steel or special high-resistance steel

WASTEMASTER® TSB 4 Septic Tank Sludge Treatment PlantsThe TSB4 Septic Tank Sludge Treatment Plantscarry out up to 4 different processes: screening, de-watering, de-greasing and compacting of sewage from septic tanks or industrial plants.

- Designed to treat highly concentrated waste- Removes heavy solids, grit and grease/scum- Floating screw for removal of floating matter- Capacity up to 100 m3/h

Internally Fed Rotating Drum Screens RTV SEPTICRTV SEPTIC Internally Fed Rotating Drum Screens are suitable for septage receiving stations.

- Flow rates up to 120 m3/h at 4% solids concentration

- Perforated screen: 5 - 6 - 10 mm

14

SED

IMEN

TATI

ON

14

Peripheral Traction Clarifiers PTP / PTA

PTP Peripheral Traction Clarifiers are used to remove biological sludge and floating particles in both circular primary and secondary settling tanks.

- Available for tanks of up to 60 m in diameter

- Scum removal device included- Hot dip-galvanised carbon steel or 304 L /

316 L stainless steel

Travelling Bridges for Settlement Tanks PVSPVS Travelling Bridges installed in settling tanks in effluent treatment plants are used to remove sludge and scum from the bottom of the tank.

- Available for up to 13 m wide and 50 m long tanks

- Sludge and scum removal devices included

CLARIfIERS

Central Traction Clarifiers PTCPTC Central Traction Bridge Clarifiers are used to remove biological sludge in circular primary and secondary settling tanks in both municipal and industrial waste water treatment plants.

- Available for tanks of up to 18 m in diameter - Central bearing for units larger than 14 m in diameter- Electric torque limit switch, scum removal device, and

walkway on request

15

scr

een

ing

s h

an

dli

ng

/ sl

ud

ge

trea

tmen

t

15

SLUdGE TREATMENT EQUIPMENT / SCREENINGS CONvEyING EQUIPMENT

Shaftless Screw Conveyors SSCSSC Shaftless Screw Conveyors offer large volume capacity and the possibility of handling screenings and floating matter, as well as de-watered, thickened, or conditioned sludge.

- Throughput rates: up to 45 m³/h (26.4 cfm) for sludge; up to 13 m³/h (7.6 cfm) for screenings - Drive power: 0.55 kW (0.75 HP) ~ 9.2 kW (12.5 HP)- Trough and spiral manufactured from carbon steel or 304L / 316L stainless steel - UHMWP trough liner

Sludge Thickeners ISPISP Sludge Thickeners are used to thicken sludge in municipal and industrial effluent treatment plants.

- For up to 18 m-diameter tanks - Central bearing for units larger than 12 m in diameter - Hot dip-galvanised carbon steel or 304 L / 316 L

stainless steel

Slide Valves VLVL Slides Valves are the ideal equipment for intercepting the flow of powdery or granular materials, as well as screenings and sludge in gravity or conveying applications.

16

scr

een

ing

s h

an

dli

ng

/ sl

ud

ge

trea

tmen

t

16

Continuous Single Shaft Mixers WAHThe WAH Continuous Single Shaft Mixer is the ideal machine to obtain highest quality mixtures. Mixing with WAH is quick though gentle and efficient.

Continuous Twin Shaft Paddle Mixers MESCThe MESC-type Twin Shaft Paddle Mixer is among the most efficient yet economic mixer types for inerting sludge.

Live Bin Bottoms MUFor discharging difficult materials such as municipal or industrial sludge from polygonal hoppers or silos, MU Live Bin Bottoms (Multiple Screw Feeders) are the ideal equipment.

- Screw diameter: 150 ~ 600 mm (6 ~ 24 in) - Up to six screws in one trough - Open trough length ranging

from 1,500 to 4,000 mm (5 ~ 13 ft)

17

Lim

e D

osi

ng

17

LIME dOSING

Bin Activator BAThe BA is the ultimate Bin Activator. Industrially manufactured in large series the BA excels by its seamless cone and its double-flanged, seamless gasket. Its unique design features ensure perfectly safe operation over time.

- Gasket with integrated upper and lower flange ensuring safe dustproof connection

- No welding seams on cone and seal- Easy to fit

Tubular Screw Feeder TUThe TU Tubular Screw Feeder is designed to accurately feed lime from a storage silo into a micro-batch feeder or directly into a lime dissolver or a sludge conditioning mixer.

- Accurate feed rate- High efficiency- Enhanced reliability

Micro-batch Feeder MBFThe MBF Micro-Batch Feeder is particularly suitable for feeding quicklime or hydrated lime with high accuracy into a milk of lime dissolver or a sludge conditioning mixer.

- High feeding accuracy - Easy and quick maintenance due to small number of

components- Minimum material residue

WAMFLO® Silo Venting Filter

Pinch Valve VM

Butterfly Valve VFS

Pressure Switch Meters IPM / IPE

Drop-Through Rotary Valve RV / RVR

Silo Safety System KCS

Membrane Pressure Relief Valve VHS-C

Spring-loaded Pressure Relief Valve VCP

EXTRABEND® Anti-wear Pipe Elbows

Rotary Level Indicator ILT

Especially tailored to lime dosing requirements, WAMGROUP® has developed highly application-oriented equipment for silo venting and silo safety, for discharging, feeding, conveying, and intercepting lime powder in Lime Dosing Plants as used in waste water treatment.

18

Mis

cell

an

eou

s

18

MISCELLANEOUS EQUIPMENT & ACCESSORIES

EASYFILL™ FIBC Filling Systems

EASYFILL FIBC™ Filling Stations enable efficient filling of bulk bags. The empty FIBC is attached to stretching arms integrated into the filling head.

Penstocks PARPAR Penstocks are used in municipal and industrial waste water treatment plants to isolate a piece of equipment or parts of a plant.

Purposes: - Isolating a piece of equipment - Shutting off a whole part of a plant - Controlling water level and/or flow rates

FIBC Dischargers SBBSBB-type FIBC Dischargers ensure economic, dust-free discharging of bulk solids from bulk bags.

19

bio

soli

ds

equ

ipm

ent

19

BIOSOLIdS EQUIPMENT

SEPCOM® Horizontal Solids-Liquid Screw Separator Presses

SEPCOM® MFT Micro-Filters

SEPCOM® Horizontal is an innovative solids-liquid Screw Separator Press. Thanks to its special features, a variety of materials from biogas plants, industrial processes, as well as slurry from livestock breeding can be treated.

The SEPCOM® MFT Micro-Filter is a machine for micro-screening of the liquid phase from a previous separation process of slurry, digestate from biogas generation processes or waste water from industrial processes. It can be applied in all water purification processes.

20

bio

soli

ds

equ

ipm

ent

20

Bulk Biomass Digester Feeding Systems TCBThe TCB Bulk Biomass Conveying System represents the most realiable solution to any feeding and conveying requirement for biomass handling in Biogas plants such as manure, crops, green waste, etc.

SEPCOM® Vertical Solids-Liquid Screw Separator Presses

SEPCOM® Vertical is an innovative solids-liquid screw separator press. Thanks to its special features, vertical work position and a twin-screw design, a variety of materials from biogas plants, industrial processes, as well as slurry from livestock breeding can be treated.

21

Ren

ewa

ble

en

eRgy

gen

eRat

ion

21

RENEWABLE ENERGy GENERATION

Hydrodynamic Screws PAENaturally downward flowing water starts the PAE Hydrodynamic Screw, which transforms hydropower into electric energy. Hydrodynamic Screws exploit waterfalls of limited height and moderate flow rates ensuring an efficiency that cannot be matched by any other type of turbine.

www.wamgroup.com/wwt

2030

0122

5

Nov

embe

r 201

6

Righ

ts re

serve

d to m

odify

tech

nical

spec

ifica

tions

.

Available from:

FILQUIP Pty Limited

5/126 Compton Rd Underwood Qld 4119

Australia Phone: +61 7 3208 3499

Fax: +61 7 3208 3449 Email: sales@filquip.com.au

www.filquip.com.au