Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Walsin Lihwa has been the leading manufacturer for specialty steel, power cables, and copper wires
and rods in the greater China region. The company entered the specialty steel industry in 1993 and
started to manufacture flat products in December 2003. Our belief is to grow with our customers
with high quality services, prompt delivery, customization services, and added value products.
Walsin Lihwa continuously enhances its core competitiveness to become a world-class leading
manufacturer in stainless steel industry.
The Stainless Steel Business of Walsin Lihwa Corporation set up operating sites in Taiwan (Tainan
Yenshui, Taichung Wuqi), Mainland China (Jiangsu Jiangyin, Shandong Yantai, Jiangsu Changshu)
and Malaysia. The company supplies steel making functions and various product lines with the
advantages of shortening supply chain and enhancing cost and time effectiveness. The state of the
art technology and facilities make tailored procurement requirement possible.
Walsin Lihwa Manufatures stainless stell billets, slabs, hot rolled bands/ No.1 coils/ 2D coils/ 2B coils/
2E coils, wire rods, hot-rolled bars, peeling bars, cold-drawn bars, and CG bars. Annual production
capacity include 500,000 tons of billets and slabs, 300,000 tons of wire rods, 48,000 tons of peeling
bars and cold drawn bars, 350,000 tons of hot rolled coils cold rolled coils. Walsin Lihwa is the only
stainless steel manufacturer in Taiwan that incorporates melting, rolling, annealing, pickling, peeling,
and cold drawing into an integrated operation, and also produces the coils. Our worldwide sales
channel covers Taiwan, China, Southeast Asia, Middle East, India, Japan, Korea, Europe, America and
Russia.
Our wire rods are used to process into screws, nuts, bolts, drawn wires, and welding wires by
downstream partners. Billets and hot rolled bars are supplied as raw material for hot forged and
seamless pipes. Peeling and cold drawn bars are primarily used in spare parts of precision gauges
and shafts, 3C and accessories, OA facilities, yacht motors, pumps and petrochemical industry. Flat
products are applied in chemical tank, pipe, heat exchanger, medical equipment, food industry,
construction material, kitchen utensil and electric equipment.
Walsin Lihwa has a solid foundation in material technology and metallurgy R&D, partnering with top-
tier international companies featuring the most advanced technologies. The company also works with
academia, industry partners, and relevant government organizations for new product R&D, and has won
patents of many categories of steel. Meanwhile, international certificates of ISO9001 Quality Management
System, ISO14001 Environment Management System, DNV Manufacturing Procedure, ISO/IEC17025
Laboratory Certificate (Testing Field & Calibration Field), Lloyd's Register Certificate and European Directive
97/23/EC for Pressure Equipment have been granted.
3
小鋼胚Billet
扁鋼胚Slab
小(扁)鋼胚連鑄機Billet / Slab CC
真空爐VOD
轉 爐MRP
電 爐EAF
加熱爐Reheating Furnace
熱軋線材盤元HR Wire rod
熱軋條鋼盤元HR Bar in coil
熱軋直棒HR straight bar
連續熱處理爐Annealing Furance
退火爐Annealing Furance
酸洗線Pickling Line
線材盤元Wire rod
條鋼盤元Bar in coil
矯 直Straightening
削皮&軋光Peeling & Reeling
削皮&軋光直棒Peeling & Reeling bar
粗軋機HRM 200
中軋機Intermediate 3-ROLL Block
粗軋機RB500
精軋機Pre-Finishing 3-ROLL Block
線材精軋機Finishing Block
原 料Raw Material
精煉爐LHF
異形棒Shaped Bar
冷 抽cold drawing
披 覆coating
冷抽圓棒CD Round Bar
無心研磨CG Bar
六角棒 ( Hex )
四角棒 ( Square )
扁圓棒 ( Oval )
生產流程 Production Process
鹽水廠(長條類)
Yen Shui ( Long Products )
4
扁鋼胚Slab
加熱爐Reheating Furnace
熱軋機Hot Rolling Mill
2D 鋼捲( 2D Coil )
2E 鋼捲( 2E Coil )
熱軋NO.1鋼捲( HR-No.1 Coil )
熱軋鋼捲Hot Rolled Strips
熱軋黑皮鋼捲Hot Rolled Band
委外代工 Outsourcing
CPL 鋼捲準備線
6-High Cold Rolling Mill 六重輥冷軋機
H/CAPL 熱/冷軋退火酸洗線
SPM & Tension Leveller Line (調質整平線)
2B 鋼捲( 2B Coil )
鹽水廠、台中廠(平板類)
Yen Shui, Taichung ( Flat Products )
5
不銹鋼小鋼胚/扁胚 Stainless Steel Billet / Slab
華新麗華鹽水廠生產不銹鋼小鋼胚及扁鋼胚,小鋼胚經
軋延製成線材盤元及直棒,同時外售鍛造業者加工成各
式鍛件,亦可加工製成無縫鋼管。扁鋼胚除了可用於鍛
造製成法蘭、大型機械零配件外,主要為不銹鋼熱軋黑
皮鋼捲或再加工製成冷軋鋼捲或中厚板之原材料。
Walin Lihwa manufactures stainless steel billets and slabs.
Billets are made into bars, wire rods, various forged items and
seamless pipes and tubes. Slabs are used to produce plates and
bands. Except forging into flanges and large machinery parts,
the slabs from this plant are primarily the material for sheets in
coil (black), which are processed by re-rollers into cold-rolled
steel sheets in coil.
不銹鋼盤元 Stainless Steel Wire Rod
不銹鋼盤元是由小鋼胚加熱軋延而成,主要供應下游業
者加工製成各式螺栓、螺絲、螺帽、牙條等扣件,並提
供伸線業者使用於伸線加工成各式鋼線、包括細線、極
細線、織網線、彈簧線、廚房用線、排釘、焊條、電子
零件、五金零件等用線,此外亦可提供直棒業用於冷抽
直棒之材料。
Wire rods - made by hot rolling of billets are processed into
bolts, nuts, screws, and threaded bars. They are also processed
into various steel wires, including fine wires, extra-fine wires,
mesh wires, spring wires, kitchen wires, strip nail wires,
welding wires, and wires for electronics and ironware parts.
Moreover, wire rods are the material for cold-drawn bars.
產品類別Product Types
不銹鋼直棒 Stainless Steel Straight Bar
不銹鋼直棒可由不銹鋼小鋼胚熱軋製成熱軋直棒和削皮棒,或以不銹鋼盤元或熱軋酸
洗棒經冷抽製成冷精棒與各式異形棒,提供下游加工應用於電腦及周邊設備之零件、
工業用途之軸件、船舶用件及醫療、化學零件等。
Straight bars, hot-rolled bars, and peeling bars are made by hot rolling of billets. Cold-drawn bars and
various shaped bars are made by cold drawing of coil or hot-rolled pickling bar. These bar products
are processed by downstream partners for the use in computers, computer peripherals, industrial
and ship shafts, chemical and medical items.
6
不銹鋼熱軋鋼捲 Hot-Rolled Band / No.1
不銹鋼熱軋黑皮鋼捲由扁鋼胚加熱軋延而成,多數供應
單軋業者。熱軋No.1鋼捲以不銹鋼熱軋黑皮鋼捲,經過
退火、酸洗等製造後,供應裁板、製管與單軋業者。
The Slabs can transform to hot-rolled bands which mostly
supply to re-rollers. The hot-rolled bands can process into
hot-rolled No.1 coils through annealing and pickling, that
mainly sell to coil centers, pipe makers and re-rollers.
不銹鋼冷軋鋼捲 Cold-Rolled Coil
冷軋鋼捲是將熱軋鋼捲經冷軋、退火、酸洗、調質後而
成,有較薄之厚度、較佳的精準度,表面光滑、平整、加
工性佳,提供用於汽車業、餐廚用具業、家電業、建築裝
潢業、航太業、石化業、食品業、機械業、交通業等。
Cold-rolled coils are made by hot-rolled coils, that undergone
cold rolling, annealing, pickling and skin passing process. They
have thinner thickness, better size tolerance, smooth surface
and greater processability. Cold-rolled coils are used in the
industries such as automobile, kitchenware, home appliance,
construction, aerospace industry, petrochemical industry, food
industry, machinery and transportation.
7
For Stainless Steel Billet & Bar & Wire Rod: (不銹鋼鋼胚、盤元、直棒)
Austenitic (奧斯田鐵系)
Specification 規範 Chemical Composition (%) A 化學成份 AvailableB ProductAISI JIS DIN WALSIN C Si Mn P S Ni Cr Mo Cu N Other
204Cu - -AISI
204Cu0.15 1.00 6.50-9.00 0.060 0.030 1.50-3.50 15.50-17.50 - 2.00-4.00 0.05-0.25 A,W,B
- - 1.4597 204Cu 0.10 2.00 6.50-8.50 0.040 0.030 2.00 16.0-18.0 1.00 2.00-3.5 0.15-0.30 B:0.0005-0.0050 A,W,B
XM-19 - - XM-19 0.06 1.00 4.00-6.00 0.045 0.030 11.50-13.50 20.50-23.50 1.50-3.00 - 0.20-0.40Nb:0.10-0.30 V:0.10-0.30
A,B
301 301 1.4310 301 0.15 1.00 2.00 0.045 0.030 6.00-8.00 16.00-18.00 - - 0.10 A,W,B
302 302 1.4325 302 0.15 1.00 2.00 0.045 0.030 8.00-10.00 17.00-19.00 - - 0.10 A,W,B
303 303 1.4305303 0.15 1.00 2.00 0.20 0.15 min. 8.00-10.00 17.00-19.00 - - - A,W,B
303F 0.15 1.00 2.00 0.20 0.30-0.40 8.00-10.00 17.00-19.00 - - - A,W,B
- 303Cu - 303Cu 0.15 1.00 3.00 0.20 0.15 min. 8.00-10.00 17.00-19.00 - 1.50-3.50 - A,W,B
304 304 1.4301
304 0.08 1.00 2.00 0.045 0.030 8.00-10.50 18.00-20.00 - - 0.10 A,W,B
304F 0.08 1.00 2.00 0.045 0.015-0.030 8.00-10.50 18.00-20.00 - - 0.10 A,W,B
304H 0.06-0.08 1.00 2.00 0.045 0.030 8.00-10.50 18.00-20.00 - - - A,W,B
304M 0.08 1.00 2.00 0.045 0.030 9.00-10.50 18.00-20.00 - - 0.10 A,W,B
304MF 0.08 1.00 2.00 0.045 0.015-0.030 9.00-10.50 18.00-20.00 - - 0.10 A,W,B
S30432 - -Super 304H
0.07-0.13 0.30 1.00 0.040 0.010 7.50-10.50 17.00-19.00 - 2.50-3.50 0.05-0.12Al:0.003-0.030 B:0.001-0.010
A
304L-
1.4307304L 0.03 1.00 2.00 0.045 0.030 8.00-12.00 18.00-20.00 - - - A,W,B
- 304LF 0.03 1.00 2.00 0.045 0.015-0.030 8.00-12.00 18.00-20.00 - - - A,W,B
- 304L1.4307
304L 0.03 1.00 2.00 0.045 0.030 9.00-13.00 18.00 20.00 - - - A,W,B
304LS 0.03 1.00 2.00 0.045 0.015-0.030 9.00-13.00 18.00-20.00 - - - A,W,B
1.4306 304S 0.03 1.00 2.00 0.045 0.030 10.00-12.00 18.00-20.00 - - - A,W,B
- 304N1 - 304N1 0.08 1.00 2.50 0.045 0.030 7.00-10.50 18.00-20.00 - - 0.10-0.25 A,W,B
- 304N2 - 304N2 0.08 1.00 2.50 0.045 0.030 7.50-10.50 18.00-20.00 - - 0.15-0.30 Nb:0.15max. A,W,B
- 304J3 -
304J3 0.08 1.00 2.00 0.045 0.030 8.00-10.50 17.00-19.00 - 1.00-3.00 - A,W,B
304HC 0.08 1.00 2.00 0.045 0.030 8.00-10.50 18.00-19.00 - 1.00-3.00 - A,W,B
304J3-S 0.03 1.00 2.00 0.045 0.030 8.00-10.50 17.00-19.00 - 2.00-3.00 - A,W,B
302HQ - - XM7 0.03 1.00 2.00 0.045 0.030 8.00-10.00 17.00-19.00 - 3.00-4.00 - A,W,B
- XM7 1.4567 302HQ 0.08 1.00 2.00 0.045 0.030 8.50-10.50 17.00-19.00 - 3.00-4.00 A,W,B
305 305 - 305 0.12 1.00 2.00 0.045 0.030 10.50-13.00 17.00-19.00 - 1.00 - A,W,B
- 305J1 1.4303 305J1 0.08 1.00 2.00 0.045 0.030 11.00-13.50 16.50-19.00 - - - A,W,B
310S 310S 1.4845 310S 0.08 1.50 2.00 0.045 0.030 19.00-22.00 24.00 26.00 - - - A,W,B
310H - 1.4845 310H 0.04-0.08 1.50 2.00 0.045 0.030 19.00-22.00 24.00 26.00 - - - A,W,B
314 314 1.4841 314 0.25 1.50-3.00 2.00 0.045 0.030 19.00-22.00 23.00 26.00 - - - A,W,B
316 316 1.4401316 0.08 1.00 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 - - A,W,B
316MF 0.08 1.00 2.00 0.045 0.015-0.030 10.00-14.00 16.00-18.00 2.00-3.00 - - A,W,B
- 316F - 316F 0.08 1.00 2.00 0.045 0.10 min. 10.00-14.00 16.00-18.00 2.00-3.00 - - A,W,B
316L-
1.4404
316L 0.03 1.00 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 - - A,W,B
- 316LF 0.03 1.00 2.00 0.045 0.015-0.030 10.00-14.00 16.00-18.00 2.00-3.00 - - A,W,B
- 316L 316L 0.03 1.00 2.00 0.045 0.030 12.00-15.00 16.00-18.00 2.00-3.00 - - A,W,B
A: Maximum,unless range or minimum is indicated.
B: Available Product(可供應產品型態): A: billet(小鋼胚) W: wire rods(盤元) B: bar(直棒)
產品規格 Products Specification
不銹鋼鋼種與化學成份對照
Available Stainless Steel Grades & Chemical Composition
8
Austenitic (奧斯田鐵系)
Specification 規範 Chemical Composition (%) A 化學成份 AvailableB ProductAISI JIS DIN WALSIN C Si Mn P S Ni Cr Mo Cu N Other
- 316L 1.4404 316LS 0.03 1.00 2.00 0.045 0.015-0.030 12.00-15.00 16.00-18.00 2.00-3.00 - - A,W,B
- - 1.4578 316Cu 0.04 1.00 2.00 0.045 0.015 10.00-11.00 16.50-17.50 2.00-2.50 3.00-3.50 - A,W,B
316N -- 316N
0.08 1.00 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 - 0.10-0.16 A,W,B
- 316N 0.08 1.00 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 - 0.10-0.22 A,W,B
316LN -1.4406 316LN
0.03 1.00 2.00 0.045 0.030 10.00-13.00 16.00-18.00 2.00-3.00 - 0.10-0.16 A,W,B
- 316LN 0.03 1.00 2.00 0.045 0.030 10.50-14.50 16.50-18.50 2.00-3.00 - 0.12-0.22 A,W,B
- 316Ti 1.4571 316Ti 0.08 1.00 2.00 0.045 0.030 10.00- 14.00 16.00-18.00 2.00-3.00 - - Ti =5XC min. A,W,B
317 317 - 317 0.08 1.00 2.00 0.045 0.030 11.00-15.00 18.00-20.00 3.00-4.00 - 0.10 A
317L -- 317L
0.03 1.00 2.00 0.045 0.030 11.00-15.00 18.00-20.00 3.00-4.00 - 0.10 A
- 317L 0.03 1.00 2.00 0.045 0.030 11.00-15.00 18.00-20.00 3.00-4.00 - - A
321 - -321
0.08 1.00 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - - Ti =5X(C+N)-0.70 A,W,B
321 321 1.4541 0.08 1.00 2.00 0.045 0.030 9.00-13.00 17.00-19.00 - - - Ti =5XC min. A,W,B
321H - 0.04-0.10 1.00 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - - Ti =4X(C+N)-0.70 A,W,B
347 -1.4550 347
0.08 1.00 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - - Nb =10XC-1.10 A,W,B
- 347 0.08 1.00 2.00 0.045 0.030 9.00-13.00 17.00-19.00 - - - Nb =10XC min. A,W,B
347H - - 347H 0.04-0.10 1.00 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - - Nb =8XC-1.10 A,W,B
347HFG - - 347HFG 0.06-0.10 1.00 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - - Nb =8XC-1.10 A
- - - A510 0.08 1.00 3.50 0.045 0.030 6.00-8.00 17.00-19.00 - 2.00-4.00 - A,W,B
- - - A510F 0.10 1.00 3.00-7.00 0.060 0.10-0.40 3.00-7.00 15.00-18.00 - 1.00-4.00 - A,W,B
Ferrite (肥粒鐵系)
409Cb - - 409Cb 0.06 1.00 1.00 0.045 0.040 0.50 10.50-11.70 - - - Nb=10XC-0.75 A,W,B
S40976 - - 409Ni 0.03 1.00 1.00 0.040 0.030 0.75-1.0 10.50-11.70 - - 0.04Nb=10XC-0.80
Ti=0.05min.A,W,B
430 430 1.4016 430 0.12 0.75 1.00 0.040 0.030 - 16.00-18.00 - - - A,W,B
- - - 430Cu 0.08 1.00 2.00 0.040 0.030 - 16.00-18.00 - 0.50-1.50 - A,W,B
430F 430F 1.4104 430F 0.12 1.00 1.25 0.060 0.15min - 16.00-18.00 - - - A,W,B
- - 1.4511 F100 0.05 1.00 1.00 0.040 0.030 - 16.00-18.00 - - - Nb:12XC -1.0 A,W,B
- - - 439Ti 0.04 0.80 0.80 0.030 0.030 0.60 17.00-19.00 - 0.75 Ti=10 X -1.1C A,W,B
Martensitic (麻田散鐵系)
410 410 1.4006410 0.15 1.00 1.00 0.040 0.030 - 11.50-13.00 - - - A,W,B
410C 0.13-0.15 1.00 1.00 0.040 0.030 - 11.50-13.00 - - - A,W,B
403 403 1.4006 403 0.15 0.50 1.00 0.040 0.030 - 11.50-13.00 - - - A,W,B
- 410J1 1.4024 410J1 0.08-018 0.60 1.00 0.040 0.030 - 11.50-14.00 0.30-0.60 - - A,W,B
416 416 1.4005 416 0.15 1.00 1.25 0.060 0.15min - 12.00-14.00 - - - A,W,B
420 - 1.4021 420 0.15 min. 1.00 1.00 0.040 0.030 - 12.00-14.00 - - - A,W,B
- 420F 420F 0.26-0.40 1.00 1.25 0.060 0.15min. 0.60 12.00-14.00 0.60 - - A,W,B
- 1.4029 420F 0.25-0..32 1.00 1.50 0.040 0.15-0.25 12.00-13.50 0.60 - - A,W,B
- 420J1 1.4021 420J1 0.16-0.25 1.00 1.00 0.040 0.030 - 12.00-14.00 - - - A,W,B
- 420J2 1.4028 420J2 0.26-0.40 1.00 1.00 0.040 0.030 - 12.00-14.00 - - - A,W,B
431 431 1.4057 431 0.20 1.00 1.00 0.040 0.030 1.25-2.50 15.00-17.00 - - - A,W,B
440A 440A - 440A 0.60-0.75 1.00 1.00 0.040 0.030 0.60 16.00-18.00 0.75 - - W,B
9
For Stainless Steel Welding Wire Rod: (焊接用不銹鋼盤元)
Austenitic (奧斯田鐵系)
Specification 規範 Chemical Composition (%) A 化學成份 AvailableB ProductAWS JIS(SUS) DIN WALSIN C Si Mn P S Ni Cr Mo Cu N Other
- - 18 8 Mn ER 307Si 0.20 1.20 5.00-8.00 0.030 0.030 7.00-10.00 17.00-20.00 - 0.75 - A,W
ER308 - -ER 308
0.08 0.30-0.65 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - 0.75 - A,W
- Y308 - 0.08 0.65 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - - - A,W
ER308Si Y308Si - ER 308Si 0.08 0.65-1.00 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - 0.75 - A,W
ER308L - -ER 308L
0.03 0.30-0.65 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - 0.75 - A,W
- Y308L - 0.03 0.65 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - - - A,W
ER308LSi Y308LSi - ER 308LSi 0.03 0.65-1.00 1.00-2.50 0.030 0.030 9.00-11.00 19.50-22.00 - 0.75 - A,W
E 309L Y309L - E 309L 0.03 0.65 1.00-2.50 0.030 0.030 12.00-14.00 23.00-25.00 - 0.75 - A,W
ER 309LSi Y 309LSi ER 309LSi 0.03 0.65-1.00 1.00-2.50 0.030 0.030 12.00-14.00 23.00-25.00 - 0.75 - A,W
ER316 - -ER 316
0.08 0.30-0.65 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 0.75 - A,W
- Y316 - 0.08 0.65 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 - - A,W
ER316Si Y316Si - ER 316Si 0.08 0.65-1.00 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 0.75 - A,W
ER316L - -ER 316L
0.03 0.30-0.65 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 0.75 - A,W
- Y316L - 0.03 0.65 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 - - A,W
ER316LSi Y316LSi - ER 316LSi 0.03 0.65-1.00 1.00-2.50 0.030 0.030 11.00-14.00 18.00-20.00 2.00-3.00 0.75 - A,W
Ferrite(肥粒鐵系)
- - - ER 439Ti 0.07 1.00 1.00 0.040 0.030 0.50 17.00-19.00 - 0.75 0.04 Ti =12XC-1.10 A,W
Precipitation -Hardening
(析出硬化型)ER630 - ER 630 0.05 0.75 0.25-0.75 0.030 0.030 4.50-5.00 16.00-16.75 0.75 3.25-4.00 - Nb+Ta=015-0.45 A,W
A: Maximum,unless range or minimum is indicated. B: Available Product(可供應產品型態): A: billet(小鋼胚) W: wire rods(盤元)
Specification 規範 Chemical Composition (%) A 化學成份 AvailableB ProductAISI JIS DIN WALSIN C Si Mn P S Ni Cr Mo Cu N Other
Precipitation -Hardening
(析出硬化型)
630 -1.4542 630
0.07 1.00 1.00 0.040 0.030 3.00-5.00 15.00-17.50 - 3.00-5.00 - Nb+Ta=015-0.45 A,W,B
- 630 0.07 1.00 1.00 0.040 0.030 3.00-5.00 15.00-17.50 - 3.00-5.00 - Nb=015-0.45 A,W,B
631 631 - 631 0.09 1.00 1.00 0.040 0.030 6.50-7.75 16.00-18.00 - - - Al:0.75-1.50 A,W
- - 1.4568 631 0.09 0.70 1.00 0.040 0.015 6.50-7.80 16.00-18.00 - - - Al:0.70-1.50 A.W
- 631J1 - 631J1 0.09 1.00 1.00 0.040 0.030 7.00-8.50 16.00-18.00 - - - Al:0.75-1.50 A,W
Duplex(雙相鋼)
2205 - 1.4462 2205 0.03 1.00 2.00 0.030 0.020 4.50-6.50 22.00-23.00 3.00-3.50 - 0.14-0.20 A,W,B
A: Maximum,unless range or minimum is indicated.
B: Available Product(可供應產品型態): A: billet(小鋼胚) W: wire rods(盤元) B: bar(直棒)
For Stainless Steel Billet & Bar & Wire Rod: (不銹鋼鋼胚、盤元、直棒)
不銹鋼鋼種與化學成份對照
Available Stainless Steel Grades & Chemical Composition
10
For Stainless Steel Flat Products: (不銹鋼平板類產品)
Austenitic (奧斯田鐵系)
SpecificationA 規範 Chemical Composition (%)B 化學成分 AvailableC ProductAISI(ASTM) SUS(JIS) EN BIS WALSIN C Si Mn P S Ni Cr Mo Cu N Other
201 - - -201
0.15 1.00 5.50-7.50 0.060 0.030 3.50-5.50 16.00-18.00 - - 0.25S,H,N,E,D,B
- - 1.4372 - 0.15 1.00 5.50-7.50 0.045 0.015 3.50-5.50 16.00-18.00 - - 0.05-0.25
202 - - -202
0.15 1.00 7.50-10.00 0.060 0.030 4.00-6.00 17.00-19.00 - - 0.25S,H,N,E,D,B
- - 1.4373 - 0.15 1.00 7.50-10.50 0.045 0.015 4.00-6.00 17.00-19.00 - - 0.05-0.25
301 - - -
301
0.15 1.00 2.00 0.045 0.030 6.00-8.00 16.00-18.00 - - 0.10
S,H,N,E,D,B- 301 - - 0.15 1.00 2.00 0.045 0.030 6.00-8.00 16.00-18.00 - - -
- - 1.4310 - 0.05-0.15 2.00 2.00 0.045 0.015 6.00-9.50 16.00-19.00 0.80 - 0.11
304 - - -
304
0.07 0.75 2.00 0.045 0.030 8.00-10.50 17.50-19.50 - - 0.10
S,H,N,E,D,B- 304 - - 0.08 1.00 2.00 0.045 0.030 8.00-10.50 18.00-20.00 - - -
- - 1.4301 - 0.07 1.00 2.00 0.045 0.015 8.00-10.50 17.50-19.50 - - 0.11
- - - 304S1 0.07 0.75 2.00 0.045 0.030 8.00-10.50 17.50-19.50 0.70 0.50 0.10 Ti =0.10 max, Nb =0.20 max
304L - - -
304L
0.030 0.75 2.00 0.045 0.030 8.00-12.00 17.50-19.50 - - 0.10
S,H,N,E,D,B- 304L - - 0.030 1.00 2.00 0.045 0.030 9.00-13.00 18.00-20.00 - - -
- - 1.4307 - 0.030 1.00 2.00 0.045 0.015 8.00-10.50 17.50-19.50 - - 0.11
- - - 304S2 0.030 0.75 2.00 0.045 0.030 8.00-12.00 17.50-19.50 0.70 0.50 0.10 Ti =0.10 max, Nb =0.20 max
316L - - -
316L
0.030 0.75 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 - 0.10
S,H,N,E,D,B- 316L - - 0.030 1.00 2.00 0.045 0.030 12.00-15.00 16.00-18.00 2.00-3.00 - -
- - 1.4404 - 0.030 1.00 2.00 0.045 0.015 10.00-13.00 16.50-18.50 2.00-2.50 - 0.11
- - - 316L 0.030 0.75 2.00 0.045 0.030 10.00-14.00 16.00-18.00 2.00-3.00 0.70 0.10 Ti =0.10 max, Nb =0.20 max
321 - - -
321
0.08 0.75 2.00 0.045 0.030 9.00-12.00 17.00-19.00 - - 0.10 Ti
=5X(C+N)-0.70
S- 321 - - 0.08 1.00 2.00 0.045 0.030 9.00-13.00 17.00-19.00 - - - Ti =5XC min.
- - 1.4541 - 0.08 1.00 2.00 0.045 0.015 9.00-12.00 17.00-19.00 - - - Ti =5XC-0.70
309S - - -
309S
0.08 0.75 2.00 0.045 0.030 12.00-15.00 22.00-24.00 - - -
S- 309S - - 0.08 1.00 2.00 0.045 0.030 12.00-15.00 22.00-24.00 - - -
- - 1.4950 - 0.04-0.08 0.70 2.00 0.035 0.015 12.00-15.00 22.00-24.00 - - 0.10
310S - - -
310S
0.08 1.50 2.00 0.045 0.030 19.00-22.00 24.00-26.00 - - -
S- 310S - - 0.08 1.50 2.00 0.045 0.030 19.00-22.00 24.00-26.00 - - -
- - 1.4951 - 0.04-0.08 0.70 2.00 0.035 0.015 19.00-22.00 24.00-26.00 - - 0.10
317 - - -317
0.08 0.75 2.00 0.045 0.030 11.00-15.00 18.00-20.00 3.00-4.00 - 0.10 S
- 317 - - 0.08 1.00 2.00 0.045 0.030 11.00-15.00 18.00-20.00 3.00-4.00 - -
347 - - -
347
0.08 0.75 2.00 0.045 0.030 9.00-13.00 17.00-19.00 - - - Nb =10XC-1.00
S- 347 - - 0.08 1.00 2.00 0.045 0.030 9.00-13.00 17.00-19.00 - - - Nb =10XC min.
- - 1.4550 - 0.08 1.00 2.00 0.045 0.015 9.00-12.00 17.00-19.00 - - - Nb =10XC-1.00
Ferrite (肥粒鐵系)
430 - - -
430
0.12 1.00 1.00 0.040 0.030 0.75 16.00-18.00 - - -
H,N,E,D,B- 430 - - 0.12 0.75 1.00 0.040 0.030 - 16.00-18.00 - - -
- - 1.4016 - 0.08 1.00 1.00 0.040 0.015 - 16.00-18.00 - - -
Duplex(雙向鋼)
2205 - - -2205
0.03 1.00 2.00 0.030 0.020 4.50-6.50 22.00-23.00 3.00-3.50 - 0.14-0.20S
- - 1.4462 - 0.03 1.00 2.00 0.035 0.015 4.50-6.50 21.0-23.0 2.50-3.50 - 0.10-0.22
A: According to ASTM A240, JIS G4304, JIS G4305, EN 10088-2, EN 10028-7 and IS 6911. B: Maximum,unless range or minimum is indicated.
C: Available Product(可供應產品型態): S: Slab(扁鋼胚) H: Hot rolled band(熱軋黑皮鋼捲) N: No.1 coil(No.1鋼捲) E: 2E coil(2E冷軋鋼捲) D: 2D coil(2D冷軋鋼捲) B: 2B coil(2B冷軋鋼捲)
11
不銹鋼盤元允許尺寸公差對照——ASTM A555/A555MPermissible Variations in Size of Hot Finished Round Wire Rods of ASTM A555/A555M (Unit:mm)
Diameter(尺寸) Tolerance(公差) Permissible OvalityA(真圓度)
under 6.35 ±0.20 0.28
6.35 to 10 ±0.15 0.23
over 10 to 16 ±0.18 0.25
over 16 to 22 ±0.20 0.30
over 22 to 28 ±0.25 0.38
over 28 to 34 ±0.30 0.45
A: The ovality is expressed by the different between the maximum value and the minimum value on the same section.
不銹鋼盤元允許尺寸公差對照——JIS G4308 Permissible Variations in Size of Hot Finished Round Wire Rods of JIS G4308 (Unit:mm)
Diameter(尺寸) Tolerance(公差) Permissible OvalityA(真圓度)
5.5 or over up to and incl. 15 ±0.30 0.50 max.
Over 15 up to and incl. 20 ±0.40 0.60 max.
A: The ovality is expressed by the different between the maximum value and the minimum value on the same section.
不銹鋼棒允許尺寸公差對照——JIS G4303 Permissible Variations in Size of Hot Finished Round Round, Square and Hexagonal Bar of JIS G4303 (Unit:mm)
Diameter(尺寸) Tolerance(公差) Permissible OvalityA(真圓度)
15 or under ±0.30 75% or under of the full range of tolerance
over 15 up to and incl. 25 ±0.40
over 25 up to and incl. 35 ±0.50
over 35 up to and incl. 50 ±0.60
over 50 up to and incl. 80 ±0.80
over 80 up to and incl. 100 ±1.0
over 100 up to and incl. 120 ±1.3
over 120 up to and incl. 160 ±1.6
Over 160 up to and incl. 200 ±2.0
A: The ovality is expressed by the different between the maximum value and the minimum value on the same section.
不銹鋼冷抽棒允許尺寸公差對照——JIS G4318 / EN 10278 Dimension Tolerances of Cold Finished Stainless Steel Bars of JIS G4318 / EN 10278 (Unit:mm)
Diameter, side length, width across flats, thickness and width (尺寸)
Class of Tolerance(公差等級)
Class 6A (h6) Class 7A (h7) Class 8 (h8) Class 9 (h9) Class 10 (h10) Class 11 (h11) Class 12 (h12) Class 13 (h13)
3 max 0 -0.006 0 -0.010 0 -0.014 0 -0.025 0 -0.040 0 -0.060 0 -0.100 0 -0.140
Over 3 up to and incl. 6 0 -0.008 0 -0.012 0 -0.018 0 -0.030 0 -0.048 0 -0.075 0 -0.120 0 -0.180
Over 6 up to and incl. 10 0 -0.009 0 -0.015 0 -0.022 0 -0.036 0 -0.058 0 -0.090 0 -0.150 0 -0.220
Over 10 up tp and incl.18 0 -0.011 0 -0.018 0 -0.027 0 -0.043 0 -0.070 0 -0.110 0 -0.180 0 -0.270
Over 18 up to and incl. 30 0 -0.013 0 -0.021 0 -0.033 0 -0.052 0 -0.084 0 -0.130 0 -0.210 0 -0.330
Over 30 up tp and incl. 50 0 -0.016 0 -0.025 0 -0.039 0 -0.062 0 -0.100 0 -0.160 0 -0.250 0 -0.390
Over 50 up to and incl. 80 0 -0.019 0 -0.030 0 -0.046 0 -0.074 0 -0.120 0 -0.190 0 -0.300 0 -0.460
Over 80 up to and incl. 120 0 -0.022 0 -0.035 0 -0.054 0 -0.087 0 -0.140 0 -0.220 0 -0.350 0 -0.540
Over 120 up to and incl. 180B 0 -0.025 0 -0.040 0 -0.063 0 -0.100 0 -0.160 0 -0.250 0 -0.400 0 -0.630
A: The dimension tolerances of h6 and h7 depends on EN 10278. B: The dimension tolerance of this range for h6-h11 depend on EN 10278.
尺寸公差對照 Size Tolerance
12
Billet Dimension(小鋼胚尺寸) (Unit:mm)
Shape(形狀) Dimension(尺寸) Length(長度)
Round billet(圓胚) ψ160,180,200,240 3,000 - 12,000
Square billet(方胚) □155, 205 3,000 - 12,000
Diameter of Wire Rod(盤元尺寸) (Unit:mm)
Diameter Diameter Diameter Diameter Diameter
5.5 9.7 15.0 20.5 28.0
5.7 10.0 15.5 21.0 29.0
6.0 10.5 16.0 22.0 30.0
6.5 11.0 16.5 22.5 31.0
7.0 11.5 17.0 23.0 32.0
7.5 12.0 17.5 23.5 33.0
8.0 12.5 18.0 24.0 34.0
8.2 13.0 18.5 25.0
8.5 13.5 19.0 26.0
9.0 14.0 19.5 27.0
9.5 14.5 20.0 27.5
Appearance Specification of Coil(盤元外觀尺寸、單重)Item(項目) Wire rod(一般盤元)
Weight of per coil(盤元單重)
Max.(最大) 1700kg
Standard(標準) 1600kg
Range(範圍) 300 ~1700kg
Coil Dimension(盤元外觀尺寸)
Inner diameter(盤元內徑) 750mm min
Outer diameter(盤元外徑) 1400mm max.
Coiling Direction(盤捲方向) Counterclockwise(逆時鐘)
Bar Dimension(直棒尺寸) (Unit:mm)
Products(產品)
Diameter(尺寸)
Length(長度)
Diameter Tolerance(尺寸公差)
Straightness (mm/M)(直度)
Hot rolled round bar(熱軋圓棒) 17.00-120.00 2,500-6,000 ±0.20~±0.80 3.00
Hot rolled hexagon bar(熱軋六角棒) 20.00-62.00 2,500-6,000 ±0.20~±1.00 3.00
Peeled round bar(削皮棒) 16.00-115.00 3,000-6,000 h10 2.00
Cold drawn round bar(冷抽圓棒) 2.00-80.00 2,500-6,000 h9 0.50
Cold drawn square bar(冷抽四角棒) 4.76-40.00 2,500-6,000 h11 1.00
Cold drawn hexagon bar(冷抽六角棒) 4.76-63.50 2,500-6,000 h11 1.00
Centreless grinding round bar(無心研磨棒) 4.76-80.00 2,500-6,000 h8 0.30
Cold drawn similar hexagon bar(冷抽類六角棒) 4.76-63.50 2,500-6,000 h11 1.00
Cold drawn flat bar(冷抽扁棒)Widh:6.00~34.00
Thickness:6.00~32.002,500-6,100 h11 1
產品尺寸範圍對照——長條類
Available Product Size Range for Long Products
13
Slab Dimension(扁鋼胚尺寸) (Unit:mm)
Tickness(厚度) Width(寬度) Length(長度)
Size 175 or 200 800 - 1,300 5,500 - 11,600
Dimension for Hot Rolled and Cold Rolled Products(熱軋與冷軋鋼捲可供應尺寸) (Unit:mm,MT)
Nominal Width(寬)Mill Edge(Slit Edge)毛邊 (修邊)
1030(1000) 1245(1219)、1275(1250) 1535(1500)、1560(1524)
Coil Weight (單重MT) 10~19 13-22 18-22
Inner Diameter (內徑) 610
Grade (鋼種) 304/304L/316L/301 304/304L/316L/301 304/304L/316L
Type(產品型態) Hot Rolled Cold Rolled Hot Rolled Cold Rolled Hot Rolled Cold Rolled
Finish(產品表面) NO.1 2E 2B/2D NO.1 2E 2B/2D NO.1 2E 2B/2D
Nominal Thickness(厚) 2.0-6.5 1.5-3.0 0.5-3.0 2.0-6.5 1.5-3.0 0.5-3.0 3.0-6.5 1.5-3.0 0.6-3.2
Dimension Tolerance (尺寸公差)
Width(寬度公差)Mill Edge(Slit Edge) 毛邊 (修邊)
-5/+15mm(-0/+1mm)
Thickness(厚度公差) ±0.15 ±0.06 ±0.04 ±0.15 ±0.06 ±0.04 ±0.15 ±0.06 ±0.04
不銹鋼平板類產品尺寸公差
Dimension Tolerance for Stainless Steel Flat Product (Unit:mm)
Product Type (產品種類)
Dimension Tolerance(尺寸公差)
Length(長度) Width(寬度) Thickness(厚度)
Slab ( 扁鋼胚 ) ±50 ±10+ 2/-8
(+0/-15 for full grinding)
Hot Rolled Band- 5'(5呎) ( 熱軋黑皮鋼捲 )
--0/+30
(Off-gauge is ± 30)±5%
(Off-gauge is ±15%)
Hot Rolled Band- 4'(4呎) ( 熱軋黑皮鋼捲 )
-±10
(Off-gauge is -10/+20)±0.15
(Off-gauge is ±0.30)
No.1 ( 熱軋退火酸洗鋼捲 )
-
-5/+15 (Off-gauge is -10/+20)
±0.15 (Off-gauge is ±0.30)
2E ( 冷軋鋼捲 ) - ±0.06
2D、2B ( 冷軋鋼捲 ) - ±0.04
※Off-gauge : 鋼捲頭尾各10m為允許之off-gauge
產品尺寸範圍與尺寸公差對照——平板類
Available Product Size Range And Dimension Tolerance for Flat Products
14
華新麗華致力於特殊鋼、電線電纜、銅線材等基礎材料之研發製
造,為大中華區電線電纜與特殊鋼產業領導廠商之一。1993年正式
進入特殊鋼事業,2003年底開始生產平板類產品,經過多年辛勤耕
耘,始終堅持與客戶共同成長,高品質服務信念,交期快速,客製
化服務,不斷創新,提供高附加價值產品,強化客戶競爭優勢,使
華新麗華在不銹鋼產品領域中成為不銹鋼業界領導品牌。
華新麗華不銹鋼事業營運佈局涵蓋台灣(台南鹽水、台中梧棲)、
大陸(江蘇江陰、山東煙台、江蘇常熟)及馬來西亞,垂直整合上
下游製程,多樣化不銹鋼產品線,彈性生產,有效縮短供應鏈,配
合客戶採購需求,降低採購時間與成本。
不銹鋼事業部產品包括小鋼胚、扁鋼胚、熱軋黑皮鋼捲/No.1鋼捲
/2D鋼捲/2B鋼捲/2E鋼捲、盤元、削皮棒、冷精棒、無心研磨棒,產
品種類齊全、品質優異,年產不銹鋼小鋼胚與扁鋼胚50萬噸、不銹
鋼盤元30萬噸、削皮棒/冷精棒4.8萬噸、不銹鋼熱軋及冷軋鋼捲35萬
噸。是台灣唯一從煉鋼、軋製、退火、酸洗、削皮、冷抽之不銹鋼
長條類一貫化作業,且能同時生產板類產品之專業不銹廠,其產品
銷售涵蓋台灣、大陸、東南亞、中東、印度、日、韓、歐、美、俄
等市場。
盤元主要供應下游加工製成螺栓、螺絲、螺帽等扣件及使用於伸線
加工成各式鋼線與冷抽直棒;鋼胚及熱軋棒,可作為熱鍛、無縫鋼
管等產品之材料;削皮棒及冷精棒主要用途為電腦及其週邊設施、
OA設施、遊艇馬達、泵浦工業、石化工業等使用之軸件及精密儀表
零件。不銹鋼平板類產品可應用於化學桶槽、配管、熱交換器、醫
療器材、食品工業、建築用材料、餐廚用具、家電器材等。
華新麗華在冶金與材料領域裡累積深厚的技術與研發實力,除與
國際技術一流之先進廠商合作,更透過產官學界合作共同研發新
產品,並且獲得多項鋼種專利。此外,設備齊全的實驗室與各項
國際認證,確保一流產品品質,通過包括ISO9001品質管理系統、
ISO14001環境管理系統、挪威船級社協會(DNV)工廠認可證書、
ISO/IEC 17025實驗室認證-測試領域認證(機械、化學)、ISO/IEC
17025實驗室認證-校正領域認證(溫度、電量、長度、質量)、勞
氏船級社協會(LR)工廠認可證書、PED/AD2000歐盟壓力設備指令
材料製造商認證⋯等。
華新麗華不銹鋼事業
1
CertificateStandard ISO 9001:2015 Certificate Registr. No. 01 100 1325890
Certificate Holder: Walsin Lihwa Corporation Taichung Stainless Steel Plant No. 57, Jing 3rd. Rd., Wuci Dist., Taichung City 43541, Taiwan (R.O.C.)
Scope: Manufacturing of Stainless Steel Coils
Proof has been furnished by means of an audit that the requirements of ISO 9001:2015 are met.
Validity: The certificate is valid from 2018-07-03 until 2019-08-14. It remains valid subject to satisfactory surveillance audits. First certification 2013
2018-07-11 TÜV Rheinland Cert GmbH
Am Grauen Stein · 51105 Köln
www.tuv.com
® T
ÜV
, TU
EV a
nd T
UV
are
regi
ster
ed tr
adem
arks
. Util
isat
ion
and
appl
icat
ion
requ
ires
prio
r app
rova
l.
Form code: AM 1462a Revision: 2015-06 www.dnvgl.com Page 1 of 1 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
APPROVAL OF MANUFACTURER
CERTIFICATE
Certificate No: AMMM00000N0
This is to certify: That
Walsin Lihwa Corp., Yenshui Plant Tainan, Taiwan is an approved manufacturer of Steelmaking in accordance with DNV GL rules for classification – Ships Offshore Standard DNV-OS-B101 and the following particulars:
Product Semi-finished products: Billets and Slabs Grade(s) Austenitic Stainless Steel,
22Cr Duplex Stainless Steel Steelmaking Electric Arc Furnace, Basic Oxygen Converter,
Vacuum Oxygen Decarburisation Delivery conditions As Cast Max. thickness/diam. 240 mm (round billets), 155 mm (square billets),
200 mm (slabs)
Manufacturer(s) approved by this certificate is/are accepted to deliver according to DNV GL, DNV and GL rules. This Certificate is valid until 2019-06-30. Issued at Hamburg on 2016-06-14
DNV GL local station: Kaohsiung Approval Engineer: Stefan Röhr
for DNV GL
Thorsten Lohmann
Head of Section
Digitally Signed By: Wildhagen, Christian
Signing Date: 2016-06-14
Location: DNV GL Hamburg, Germany, on behalf of
1 ISO 9001 品質管理系統
ISO9001 Quality Management System
2 PED/AD2000 歐盟壓力設備指令材料製造商認證
European Directive 2014 68 EU Pressure Equipment
3 挪威船級社協會(DNV) 工廠認可證書
Det Norske Veritas Manufacturing Procedure
4 英國勞氏船級社協會(LR)工廠認可證書
LIoyd's Register Certificate
5 美國船級社協會(ABS)工廠認可證書
ABS Certificate for Casting Facility and Process Approval
6 ISO/IEC 17025 實驗室認證-測試領域認證 (機械、化學)
ISO/IEC 17025 Laboratory Certificate (Testing Field)
7 ISO/IEC 17025 實驗室認證-校正領域認證
(溫度、電量、長度、質量)
ISO/IEC 17025 Laboratory Certificate (Calibration Field)
8 ISO14001 環境管理系統
ISO 14001 Environment Management System
9 OHSAS 18001 職業安全衛生管理系統
OHSAS 18001 Occupational Health and Safety Management
TOSHMS 職業安全衛生管理系統
Taiwan Occupational Safety and Health Management System
ISO 50001 能源管理系統
ISO 50001 Energy Management System
溫室氣體排放量查證聲明書
Greenhouse Gas Emission Verification Statement
鋼鐵業輻射偵檢作業認可證書
Radiation Inspection Operation Approval In Steel Industry
1 ISO 9001 品質管理系統
ISO9001 Quality Management System
2 PED/AD2000 歐盟壓力設備指令材料製造商認證
European Directive 2014 68 EU Pressure Equipment
3 JIS MARK認證
JIS MARK Scheme Certificate of Compliance
4 印度BIS認證
BUREAU OF INDIAN STANDARDS
5 歐盟建築產品法規305/2011/EU認證
European Construction Products Regulation
305/2011/EU Certificate
6 ISO/IEC 17025 實驗室認證-測試領域認證 (機械)
ISO/IEC 17025 Laboratory Certificate (Testing Field)
7 ISO14001 環境管理系統
ISO 14001 Environment Management System
8 OHSAS 18001 職業安全衛生管理系統
OHSAS 18001 Profession, Safety and Hygiene System
9 TOSHMS 職業安全衛生管理系統
Taiwan Occupational Safety and Health Management
ISO 50001 能源管理系統
ISO 50001 Energy Management System
ISO 14046 水足跡查驗
ISO 14046 Water Footprint Verification
專業認證——鹽水廠Certifications - Yenshui Plant
專業認證——台中廠Certifications - Taichung Plant
10
11
10
11
12
13
17 18
Profile of Stainless Steel Business
2
不銹鋼鋼種的應用——長條類產品
Application of Stainless Steel Grade for Long Products
產品類別 線材/條棒類(Wire and Bar)
Application用途
Bolt Nut
ScrewSelf-drilling
ScrewWeaving
WireEPQWire
Spoke Wire
Spring Wire
Earphone Wire
Windshield Wiper Wire
Antenna Wire
Brush-ing Wire
Shaft Heat Resis-tance Wire
Welding Wire
Machining Parts
Seam-less Pipe
Grade螺栓螺帽
螺絲鑽尾螺絲
網線電解拋光線
車輪幅條
彈簧線 耳機線 雨刷線汽車天線
鮑魚刷 軸心 耐高溫線 焊條線 車削零件無縫 鋼管
204Cu ※ ※ ※ ※ ※
XM19 ※
301 ※ ※ ※ ※
302 ※
303 ※ ※
303Cu ※ ※
304 ※ ※ ※ ※ ※ ※
304M ※ ※ ※ ※ ※ ※
304H ※ ※ ※ ※
Super 304H ※
304HC ※ ※
304J3-S ※ ※
304L ※ ※ ※
304N1 ※ ※
A510 ※ ※ ※
A510F ※ ※
XM7 ※ ※
302HQ ※ ※
305 ※ ※
305J1 ※
316Cu ※
316 ※ ※
316F ※ ※
316L ※ ※ ※
316N ※
316LN ※
316Ti ※ ※ ※ ※
ER 316(L) ※
ER 308(L) ※
ER 309L ※
310S ※ ※ ※ ※
314 ※ ※
317(L) ※
321 ※ ※ ※
347(H) ※ ※
409CB ※ ※
410 ※ ※ ※
410J1 ※ ※
416 ※ ※
420/420J2 ※
420F ※
431 ※
430 ※ ※ ※
F100 ※ ※ ※
430Cu ※ ※ ※ ※
430F ※ ※
ER 439Ti ※
440A ※
630 ※ ※
631 ※ ※
ER 630 ※
2205 ※ ※
不銹鋼鋼種的應用——平板類產品
Application of Stainless Steel Grade for Flat Products
產品類別 平板類(Flat Product)
Application 用途 Chemical
Tank Pipe/Tube
Heat Exchanger
Medical Device
Food Industry
Construc-tion
Material
Building Decora-
tions
Kitchen Utensils
Electric Appliances
Clockwork Spring
Electronic Communi-
cationForging
Surfacequality 表面品級
化學 桶槽
鋼管 熱交換器醫療 器材
食品 工業
建築用材料
建築 裝潢
餐廚用具 電器發條/ 捲(彈)簧
電子/ 通訊
鍛造/ 鍛造法蘭
Grade 鋼種 No.1
2E 2D
No.1 2E 2D
2D 2B 2B 2B2B BA
2B BA
2B BA
2B BA
2B BA
Slab
201 ※ ※ ※
202 ※ ※ ※
301 ※ ※ ※
304 ※ ※ ※ ※ ※ ※ ※ ※ ※ ※ ※
304L ※ ※ ※ ※
316 ※ ※ ※ ※ ※ ※
316L ※ ※ ※ ※ ※
321 ※ ※
309S ※ ※
310S ※ ※
317 ※ ※ ※ ※ ※
347 ※ ※
430 ※ ※ ※
2205 ※ ※ ※
15 16